All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 26/52] target/arm: Implement ARMv8.1-PMU extension
Date: Fri, 21 Feb 2020 13:07:14 +0000	[thread overview]
Message-ID: <20200221130740.7583-27-peter.maydell@linaro.org> (raw)
In-Reply-To: <20200221130740.7583-1-peter.maydell@linaro.org>

The ARMv8.1-PMU extension requires:
 * the evtCount field in PMETYPER<n>_EL0 is 16 bits, not 10
 * MDCR_EL2.HPMD allows event counting to be disabled at EL2
 * two new required events, STALL_FRONTEND and STALL_BACKEND
 * ID register bits in ID_AA64DFR0_EL1 and ID_DFR0

We already implement the 16-bit evtCount field and the
HPMD bit, so all that is missing is the two new events:
  STALL_FRONTEND
   "counts every cycle counted by the CPU_CYCLES event on which no
    operation was issued because there are no operations available
    to issue to this PE from the frontend"
  STALL_BACKEND
   "counts every cycle counted by the CPU_CYCLES event on which no
    operation was issued because the backend is unable to accept
    any available operations from the frontend"

QEMU never stalls in this sense, so our implementation is trivial:
always return a zero count.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200214175116.9164-14-peter.maydell@linaro.org
---
 target/arm/helper.c | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index 68649121250..2fe09c1d604 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -1124,6 +1124,24 @@ static int64_t instructions_ns_per(uint64_t icount)
 }
 #endif
 
+static bool pmu_8_1_events_supported(CPUARMState *env)
+{
+    /* For events which are supported in any v8.1 PMU */
+    return cpu_isar_feature(any_pmu_8_1, env_archcpu(env));
+}
+
+static uint64_t zero_event_get_count(CPUARMState *env)
+{
+    /* For events which on QEMU never fire, so their count is always zero */
+    return 0;
+}
+
+static int64_t zero_event_ns_per(uint64_t cycles)
+{
+    /* An event which never fires can never overflow */
+    return -1;
+}
+
 static const pm_event pm_events[] = {
     { .number = 0x000, /* SW_INCR */
       .supported = event_always_supported,
@@ -1140,8 +1158,18 @@ static const pm_event pm_events[] = {
       .supported = event_always_supported,
       .get_count = cycles_get_count,
       .ns_per_count = cycles_ns_per,
-    }
+    },
 #endif
+    { .number = 0x023, /* STALL_FRONTEND */
+      .supported = pmu_8_1_events_supported,
+      .get_count = zero_event_get_count,
+      .ns_per_count = zero_event_ns_per,
+    },
+    { .number = 0x024, /* STALL_BACKEND */
+      .supported = pmu_8_1_events_supported,
+      .get_count = zero_event_get_count,
+      .ns_per_count = zero_event_ns_per,
+    },
 };
 
 /*
@@ -1150,7 +1178,7 @@ static const pm_event pm_events[] = {
  * should first be updated to something sparse instead of the current
  * supported_event_map[] array.
  */
-#define MAX_EVENT_ID 0x11
+#define MAX_EVENT_ID 0x24
 #define UNSUPPORTED_EVENT UINT16_MAX
 static uint16_t supported_event_map[MAX_EVENT_ID + 1];
 
-- 
2.20.1



  parent reply	other threads:[~2020-02-21 13:22 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-21 13:06 [PULL 00/52] target-arm queue Peter Maydell
2020-02-21 13:06 ` [PULL 01/52] aspeed/scu: Create separate write callbacks Peter Maydell
2020-02-21 13:06 ` [PULL 02/52] aspeed/scu: Implement chip ID register Peter Maydell
2020-02-21 13:06 ` [PULL 03/52] hw/misc/iotkit-secctl: Fix writing to 'PPC Interrupt Clear' register Peter Maydell
2020-02-21 13:06 ` [PULL 04/52] mainstone: Make providing flash images non-mandatory Peter Maydell
2020-02-21 13:06 ` [PULL 05/52] z2: " Peter Maydell
2020-02-21 13:06 ` [PULL 06/52] target/arm: Flush high bits of sve register after AdvSIMD EXT Peter Maydell
2020-02-21 13:06 ` [PULL 07/52] target/arm: Flush high bits of sve register after AdvSIMD TBL/TBX Peter Maydell
2020-02-21 13:06 ` [PULL 08/52] target/arm: Flush high bits of sve register after AdvSIMD ZIP/UZP/TRN Peter Maydell
2020-02-21 13:06 ` [PULL 09/52] target/arm: Flush high bits of sve register after AdvSIMD INS Peter Maydell
2020-02-21 13:06 ` [PULL 10/52] target/arm: Use bit 55 explicitly for pauth Peter Maydell
2020-02-21 13:06 ` [PULL 11/52] target/arm: Fix select for aa64_va_parameters_both Peter Maydell
2020-02-21 13:07 ` [PULL 12/52] target/arm: Remove ttbr1_valid check from get_phys_addr_lpae Peter Maydell
2020-02-21 13:07 ` [PULL 13/52] target/arm: Split out aa64_va_parameter_tbi, aa64_va_parameter_tbid Peter Maydell
2020-02-21 13:07 ` [PULL 14/52] target/arm: Add _aa32_ to isar_feature functions testing 32-bit ID registers Peter Maydell
2020-02-21 13:07 ` [PULL 15/52] target/arm: Check aa32_pan in take_aarch32_exception(), not aa64_pan Peter Maydell
2020-02-21 13:07 ` [PULL 16/52] target/arm: Add isar_feature_any_fp16 and document naming/usage conventions Peter Maydell
2020-02-21 13:07 ` [PULL 17/52] target/arm: Define and use any_predinv isar_feature test Peter Maydell
2020-02-21 13:07 ` [PULL 18/52] target/arm: Factor out PMU register definitions Peter Maydell
2020-02-21 13:07 ` [PULL 19/52] target/arm: Add and use FIELD definitions for ID_AA64DFR0_EL1 Peter Maydell
2020-02-21 13:07 ` [PULL 20/52] target/arm: Use FIELD macros for clearing ID_DFR0 PERFMON field Peter Maydell
2020-02-21 13:07 ` [PULL 21/52] target/arm: Define an aa32_pmu_8_1 isar feature test function Peter Maydell
2020-02-21 13:07 ` [PULL 22/52] target/arm: Add _aa64_ and _any_ versions of pmu_8_1 isar checks Peter Maydell
2020-02-21 13:07 ` [PULL 23/52] target/arm: Stop assuming DBGDIDR always exists Peter Maydell
2020-02-21 13:07 ` [PULL 24/52] target/arm: Move DBGDIDR into ARMISARegisters Peter Maydell
2020-02-21 13:07 ` [PULL 25/52] target/arm: Read debug-related ID registers from KVM Peter Maydell
2020-02-21 13:07 ` Peter Maydell [this message]
2020-02-21 13:07 ` [PULL 27/52] target/arm: Implement ARMv8.4-PMU extension Peter Maydell
2020-02-21 13:07 ` [PULL 28/52] target/arm: Provide ARMv8.4-PMU in '-cpu max' Peter Maydell
2020-02-21 13:07 ` [PULL 29/52] target/arm: Correct definition of PMCRDP Peter Maydell
2020-02-21 13:07 ` [PULL 30/52] target/arm: Correct handling of PMCR_EL0.LC bit Peter Maydell
2020-02-21 13:07 ` [PULL 31/52] target/arm: Test correct register in aa32_pan and aa32_ats1e1 checks Peter Maydell
2020-02-21 13:07 ` [PULL 32/52] target/arm: Use isar_feature function for testing AA32HPD feature Peter Maydell
2020-02-21 13:07 ` [PULL 33/52] target/arm: Use FIELD_EX32 for testing 32-bit fields Peter Maydell
2020-02-21 13:07 ` [PULL 34/52] target/arm: Correctly implement ACTLR2, HACTLR2 Peter Maydell
2020-02-21 13:07 ` [PULL 35/52] hw: usb: hcd-ohci: Move OHCISysBusState and TYPE_SYSBUS_OHCI to include file Peter Maydell
2020-02-21 13:07 ` [PULL 36/52] hcd-ehci: Introduce "companion-enable" sysbus property Peter Maydell
2020-02-21 13:07 ` [PULL 37/52] arm: allwinner: Wire up USB ports Peter Maydell
2020-02-21 13:07 ` [PULL 38/52] target/arm: Vectorize USHL and SSHL Peter Maydell
2020-02-21 13:07 ` [PULL 39/52] target/arm: Convert PMUL.8 to gvec Peter Maydell
2020-02-21 13:07 ` [PULL 40/52] target/arm: Convert PMULL.64 " Peter Maydell
2020-02-21 13:07 ` [PULL 41/52] target/arm: Convert PMULL.8 " Peter Maydell
2020-02-21 13:07 ` [PULL 42/52] xilinx_spips: Correct the number of dummy cycles for the FAST_READ_4 cmd Peter Maydell
2020-02-21 13:07 ` [PULL 43/52] sh4: Fix PCI ISA IO memory subregion Peter Maydell
2020-02-21 13:07 ` [PULL 44/52] target/arm: Rename isar_feature_aa32_simd_r32 Peter Maydell
2020-02-21 13:07 ` [PULL 45/52] target/arm: Use isar_feature_aa32_simd_r32 more places Peter Maydell
2020-02-21 13:07 ` [PULL 46/52] target/arm: Set MVFR0.FPSP for ARMv5 cpus Peter Maydell
2020-02-21 13:07 ` [PULL 47/52] target/arm: Add isar_feature_aa32_simd_r16 Peter Maydell
2020-02-21 13:07 ` [PULL 48/52] target/arm: Rename isar_feature_aa32_fpdp_v2 Peter Maydell
2020-02-21 13:07 ` [PULL 49/52] target/arm: Add isar_feature_aa32_{fpsp_v2, fpsp_v3, fpdp_v3} Peter Maydell
2020-02-21 13:07 ` [PULL 50/52] target/arm: Perform fpdp_v2 check first Peter Maydell
2020-02-21 13:07 ` [PULL 51/52] target/arm: Replace ARM_FEATURE_VFP3 checks with fp{sp, dp}_v3 Peter Maydell
2020-02-21 13:07 ` [PULL 52/52] target/arm: Add missing checks for fpsp_v2 Peter Maydell
2020-02-21 14:17 ` [PULL 00/52] target-arm queue no-reply
2020-02-21 16:06 ` no-reply
2020-02-21 16:10 ` no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200221130740.7583-27-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.