[PATCH v2 1/5] dt-bindings: usb: Convert jz4740-musb doc to YAML

[PATCH v2 1/5] dt-bindings: usb: Convert jz4740-musb doc to YAML

[Paul Cercueil]

Convert ingenic,jz4740-musb.txt to ingenic,musb.yaml, and add the
new ingenic,jz4770-musb compatible string in the process.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Notes:
    v2: Changed oneOf+const to enum

 .../bindings/usb/ingenic,jz4740-musb.txt      | 32 ---------
 .../devicetree/bindings/usb/ingenic,musb.yaml | 72 +++++++++++++++++++
 2 files changed, 72 insertions(+), 32 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
 create mode 100644 Documentation/devicetree/bindings/usb/ingenic,musb.yaml

diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
deleted file mode 100644
index 16808721f3ff..000000000000
--- a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Ingenic JZ4740 MUSB driver
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-musb"
-- reg: Address range of the UDC register set
-- interrupts: IRQ number related to the UDC hardware
-- interrupt-names: must be "mc"
-- clocks: phandle to the "udc" clock
-- clock-names: must be "udc"
-- phys: phandle to the USB PHY
-
-Example:
-
-usb_phy: usb-phy@0 {
-	compatible = "usb-nop-xceiv";
-	#phy-cells = <0>;
-};
-
-udc: usb@13040000 {
-	compatible = "ingenic,jz4740-musb";
-	reg = <0x13040000 0x10000>;
-
-	interrupt-parent = <&intc>;
-	interrupts = <24>;
-	interrupt-names = "mc";
-
-	clocks = <&cgu JZ4740_CLK_UDC>;
-	clock-names = "udc";
-
-	phys = <&usb_phy>;
-};
diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
new file mode 100644
index 000000000000..7f33d3caa214
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ingenic,musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx USB IP DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: '^usb@.*'
+
+  compatible:
+    enum:
+      - ingenic,jz4770-musb
+      - ingenic,jz4740-musb
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: udc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: mc
+
+  phys:
+    description: PHY specifier for the USB PHY
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - phys
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    usb_phy: usb-phy@0 {
+      compatible = "usb-nop-xceiv";
+      #phy-cells = <0>;
+    };
+
+    udc: usb@13040000 {
+      compatible = "ingenic,jz4740-musb";
+      reg = <0x13040000 0x10000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <24>;
+      interrupt-names = "mc";
+
+      clocks = <&cgu JZ4740_CLK_UDC>;
+      clock-names = "udc";
+
+      phys = <&usb_phy>;
+    };
-- 
2.25.0

[PATCH v2 2/5] usb: musb: jz4740: Add support for DMA

[Paul Cercueil]

Add support for using the DMA channels built into the Inventra IP.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---

Notes:
    v2: No change

 drivers/usb/musb/Kconfig  |  2 +-
 drivers/usb/musb/jz4740.c | 20 ++++++++++++++------
 2 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index eb2ded1026ee..c4b349e074c1 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -144,7 +144,7 @@ config USB_UX500_DMA
 
 config USB_INVENTRA_DMA
 	bool 'Inventra'
-	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK
+	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740
 	help
 	  Enable DMA transfers using Mentor's engine.
 
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index bc0109f4700b..aa32b5af0c1f 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -24,11 +24,14 @@ struct jz4740_glue {
 static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
 {
 	unsigned long	flags;
-	irqreturn_t	retval = IRQ_NONE;
+	irqreturn_t	retval = IRQ_NONE, retval_dma = IRQ_NONE;
 	struct musb	*musb = __hci;
 
 	spin_lock_irqsave(&musb->lock, flags);
 
+	if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
+		retval_dma = dma_controller_irq(irq, musb->dma_controller);
+
 	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
 	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
 	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
@@ -46,7 +49,10 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
 
 	spin_unlock_irqrestore(&musb->lock, flags);
 
-	return retval;
+	if (retval == IRQ_HANDLED || retval_dma == IRQ_HANDLED)
+		return IRQ_HANDLED;
+
+	return IRQ_NONE;
 }
 
 static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
@@ -93,14 +99,14 @@ static int jz4740_musb_init(struct musb *musb)
 	return 0;
 }
 
-/*
- * DMA has not been confirmed to work with CONFIG_USB_INVENTRA_DMA,
- * so let's not set up the dma function pointers yet.
- */
 static const struct musb_platform_ops jz4740_musb_ops = {
 	.quirks		= MUSB_DMA_INVENTRA | MUSB_INDEXED_EP,
 	.fifo_mode	= 2,
 	.init		= jz4740_musb_init,
+#ifdef CONFIG_USB_INVENTRA_DMA
+	.dma_init	= musbhs_dma_controller_create_noirq,
+	.dma_exit	= musbhs_dma_controller_destroy,
+#endif
 };
 
 static const struct musb_hdrc_platform_data jz4740_musb_pdata = {
@@ -142,6 +148,8 @@ static int jz4740_probe(struct platform_device *pdev)
 	}
 
 	musb->dev.parent		= dev;
+	musb->dev.dma_mask		= &musb->dev.coherent_dma_mask;
+	musb->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
 
 	glue->pdev			= musb;
 	glue->clk			= clk;
-- 
2.25.0

[PATCH v2 3/5] usb: musb: jz4740: Register USB role switch

[Paul Cercueil]

Register a USB role switch, in order to get notified by the connector
driver when the USB role changes. The notification is then transmitted
to the PHY.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v2: No change

 drivers/usb/musb/Kconfig  |  1 +
 drivers/usb/musb/jz4740.c | 46 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+)

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index c4b349e074c1..3268adb7d7cf 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -113,6 +113,7 @@ config USB_MUSB_JZ4740
 	depends on MIPS || COMPILE_TEST
 	depends on USB_MUSB_GADGET
 	depends on USB=n || USB_OTG_BLACKLIST_HUB
+	select USB_ROLE_SWITCH
 
 config USB_MUSB_MEDIATEK
 	tristate "MediaTek platforms"
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index aa32b5af0c1f..bbfeb9881788 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -12,13 +12,16 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/usb/role.h>
 #include <linux/usb/usb_phy_generic.h>
 
 #include "musb_core.h"
 
 struct jz4740_glue {
 	struct platform_device	*pdev;
+	struct musb		*musb;
 	struct clk		*clk;
+	struct usb_role_switch	*role_sw;
 };
 
 static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
@@ -72,11 +75,38 @@ static const struct musb_hdrc_config jz4740_musb_config = {
 	.fifo_cfg_size	= ARRAY_SIZE(jz4740_musb_fifo_cfg),
 };
 
+static int jz4740_musb_role_switch_set(struct device *dev, enum usb_role role)
+{
+	struct jz4740_glue *glue = dev_get_drvdata(dev);
+	struct usb_phy *phy = glue->musb->xceiv;
+
+	switch (role) {
+	case USB_ROLE_NONE:
+		atomic_notifier_call_chain(&phy->notifier, USB_EVENT_NONE, phy);
+		break;
+	case USB_ROLE_DEVICE:
+		atomic_notifier_call_chain(&phy->notifier, USB_EVENT_VBUS, phy);
+		break;
+	case USB_ROLE_HOST:
+		atomic_notifier_call_chain(&phy->notifier, USB_EVENT_ID, phy);
+		break;
+	}
+
+	return 0;
+}
+
 static int jz4740_musb_init(struct musb *musb)
 {
 	struct device *dev = musb->controller->parent;
+	struct jz4740_glue *glue = dev_get_drvdata(dev);
+	struct usb_role_switch_desc role_sw_desc = {
+		.set = jz4740_musb_role_switch_set,
+		.fwnode = dev_fwnode(dev),
+	};
 	int err;
 
+	glue->musb = musb;
+
 	if (dev->of_node)
 		musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
 	else
@@ -88,6 +118,12 @@ static int jz4740_musb_init(struct musb *musb)
 		return err;
 	}
 
+	glue->role_sw = usb_role_switch_register(dev, &role_sw_desc);
+	if (IS_ERR(glue->role_sw)) {
+		dev_err(dev, "Failed to register USB role switch");
+		return PTR_ERR(glue->role_sw);
+	}
+
 	/*
 	 * Silicon does not implement ConfigData register.
 	 * Set dyn_fifo to avoid reading EP config from hardware.
@@ -99,10 +135,20 @@ static int jz4740_musb_init(struct musb *musb)
 	return 0;
 }
 
+static int jz4740_musb_exit(struct musb *musb)
+{
+	struct jz4740_glue *glue = dev_get_drvdata(musb->controller->parent);
+
+	usb_role_switch_unregister(glue->role_sw);
+
+	return 0;
+}
+
 static const struct musb_platform_ops jz4740_musb_ops = {
 	.quirks		= MUSB_DMA_INVENTRA | MUSB_INDEXED_EP,
 	.fifo_mode	= 2,
 	.init		= jz4740_musb_init,
+	.exit		= jz4740_musb_exit,
 #ifdef CONFIG_USB_INVENTRA_DMA
 	.dma_init	= musbhs_dma_controller_create_noirq,
 	.dma_exit	= musbhs_dma_controller_destroy,
-- 
2.25.0

[PATCH v2 4/5] usb: musb: jz4740: Unconditionally depend on devicetree

[Paul Cercueil]

The jz4740-musb driver is unconditionally probed from devicetree, so we
can add a hard dependency on devicetree. This makes the code a bit
cleaner, and is more future-proof as the platform data is now retrieved
using of_device_get_match_data().

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v2: No change

 drivers/usb/musb/Kconfig  |  1 +
 drivers/usb/musb/jz4740.c | 14 +++++++++-----
 2 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 3268adb7d7cf..3b0d1c20ebe6 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -110,6 +110,7 @@ config USB_MUSB_UX500
 
 config USB_MUSB_JZ4740
 	tristate "JZ4740"
+	depends on OF
 	depends on MIPS || COMPILE_TEST
 	depends on USB_MUSB_GADGET
 	depends on USB=n || USB_OTG_BLACKLIST_HUB
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index bbfeb9881788..b6747bad4fb2 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -164,7 +164,7 @@ static const struct musb_hdrc_platform_data jz4740_musb_pdata = {
 static int jz4740_probe(struct platform_device *pdev)
 {
 	struct device			*dev = &pdev->dev;
-	const struct musb_hdrc_platform_data *pdata = &jz4740_musb_pdata;
+	const struct musb_hdrc_platform_data *pdata;
 	struct platform_device		*musb;
 	struct jz4740_glue		*glue;
 	struct clk			*clk;
@@ -174,6 +174,12 @@ static int jz4740_probe(struct platform_device *pdev)
 	if (!glue)
 		return -ENOMEM;
 
+	pdata = of_device_get_match_data(dev);
+	if (!pdata) {
+		dev_err(dev, "missing platform data");
+		return -EINVAL;
+	}
+
 	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
 	if (!musb) {
 		dev_err(dev, "failed to allocate musb device");
@@ -240,20 +246,18 @@ static int jz4740_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id jz4740_musb_of_match[] = {
-	{ .compatible = "ingenic,jz4740-musb" },
+	{ .compatible = "ingenic,jz4740-musb", .data = &jz4740_musb_pdata },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, jz4740_musb_of_match);
-#endif
 
 static struct platform_driver jz4740_driver = {
 	.probe		= jz4740_probe,
 	.remove		= jz4740_remove,
 	.driver		= {
 		.name	= "musb-jz4740",
-		.of_match_table = of_match_ptr(jz4740_musb_of_match),
+		.of_match_table = jz4740_musb_of_match,
 	},
 };
 
-- 
2.25.0

[PATCH v2 5/5] usb: musb: jz4740: Add support for the JZ4770

[Paul Cercueil]

Add support for probing the jz4740-musb driver on the JZ4770 SoC.

The USB IP in the JZ4770 works the same Inventra IP as for the JZ4740,
but it features more endpoints, and officially supports OTG.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
    v2: No change

 drivers/usb/musb/jz4740.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index b6747bad4fb2..8c52a1fa6fbc 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -161,6 +161,33 @@ static const struct musb_hdrc_platform_data jz4740_musb_pdata = {
 	.platform_ops	= &jz4740_musb_ops,
 };
 
+static struct musb_fifo_cfg jz4770_musb_fifo_cfg[] = {
+	{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, },
+	{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, },
+	{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, },
+};
+
+static struct musb_hdrc_config jz4770_musb_config = {
+	.multipoint	= 1,
+	.num_eps	= 11,
+	.ram_bits	= 11,
+	.fifo_cfg	= jz4770_musb_fifo_cfg,
+	.fifo_cfg_size	= ARRAY_SIZE(jz4770_musb_fifo_cfg),
+};
+
+static const struct musb_hdrc_platform_data jz4770_musb_pdata = {
+	.mode		= MUSB_PERIPHERAL, /* TODO: support OTG */
+	.config		= &jz4770_musb_config,
+	.platform_ops	= &jz4740_musb_ops,
+};
+
 static int jz4740_probe(struct platform_device *pdev)
 {
 	struct device			*dev = &pdev->dev;
@@ -248,6 +275,7 @@ static int jz4740_remove(struct platform_device *pdev)
 
 static const struct of_device_id jz4740_musb_of_match[] = {
 	{ .compatible = "ingenic,jz4740-musb", .data = &jz4740_musb_pdata },
+	{ .compatible = "ingenic,jz4770-musb", .data = &jz4770_musb_pdata },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, jz4740_musb_of_match);
-- 
2.25.0

Re: [PATCH v2 3/5] usb: musb: jz4740: Register USB role switch

[Bin Liu]

Hi,

On Sun, Feb 23, 2020 at 10:40:06PM -0300, Paul Cercueil wrote:
> Register a USB role switch, in order to get notified by the connector
> driver when the USB role changes. The notification is then transmitted
> to the PHY.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> 
> Notes:
>     v2: No change
> 
>  drivers/usb/musb/Kconfig  |  1 +
>  drivers/usb/musb/jz4740.c | 46 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 47 insertions(+)
> 
> diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
> index c4b349e074c1..3268adb7d7cf 100644
> --- a/drivers/usb/musb/Kconfig
> +++ b/drivers/usb/musb/Kconfig
> @@ -113,6 +113,7 @@ config USB_MUSB_JZ4740
>  	depends on MIPS || COMPILE_TEST
>  	depends on USB_MUSB_GADGET
>  	depends on USB=n || USB_OTG_BLACKLIST_HUB
> +	select USB_ROLE_SWITCH
>  
>  config USB_MUSB_MEDIATEK
>  	tristate "MediaTek platforms"
> diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
> index aa32b5af0c1f..bbfeb9881788 100644
> --- a/drivers/usb/musb/jz4740.c
> +++ b/drivers/usb/musb/jz4740.c
> @@ -12,13 +12,16 @@
>  #include <linux/module.h>
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
> +#include <linux/usb/role.h>
>  #include <linux/usb/usb_phy_generic.h>
>  
>  #include "musb_core.h"
>  
>  struct jz4740_glue {
>  	struct platform_device	*pdev;
> +	struct musb		*musb;
>  	struct clk		*clk;
> +	struct usb_role_switch	*role_sw;
>  };
>  
>  static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
> @@ -72,11 +75,38 @@ static const struct musb_hdrc_config jz4740_musb_config = {
>  	.fifo_cfg_size	= ARRAY_SIZE(jz4740_musb_fifo_cfg),
>  };
>  
> +static int jz4740_musb_role_switch_set(struct device *dev, enum usb_role role)

The prototype has been changed by bce3052f0c16 ("usb: roles: Provide the
switch drivers handle to the switch in the API"). Please update.

Thanks,
-Bin.