All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chandan Rajendra <chandanrlinux@gmail.com>
To: linux-xfs@vger.kernel.org
Cc: Chandan Rajendra <chandanrlinux@gmail.com>,
	david@fromorbit.com, chandan@linux.ibm.com,
	darrick.wong@oracle.com, bfoster@redhat.com, amir73il@gmail.com
Subject: [PATCH V4 RESEND 7/7] xfs: Fix log reservation calculation for xattr insert operation
Date: Mon, 24 Feb 2020 09:30:44 +0530	[thread overview]
Message-ID: <20200224040044.30923-8-chandanrlinux@gmail.com> (raw)
In-Reply-To: <20200224040044.30923-1-chandanrlinux@gmail.com>

Log space reservation for xattr insert operation can be divided into two
parts,
1. Mount time
   - Inode
   - Superblock for accounting space allocations
   - AGF for accounting space used by count, block number, rmap and refcnt
     btrees.

2. The remaining log space can only be calculated at run time because,
   - A local xattr can be large enough to cause a double split of the dabtree.
   - The value of the xattr can be large enough to be stored in remote
     blocks. The contents of the remote blocks are not logged.

   The log space reservation could be,
   - 2 * XFS_DA_NODE_MAXDEPTH number of blocks. Additional XFS_DA_NODE_MAXDEPTH
     number of blocks are required if xattr is large enough to cause another
     split of the dabtree path from root to leaf block.
   - BMBT blocks for storing (2 * XFS_DA_NODE_MAXDEPTH) record
     entries. Additional XFS_DA_NODE_MAXDEPTH number of blocks are required in
     case of a double split of the dabtree path from root to leaf blocks.
   - Space for logging blocks of count, block number, rmap and refcnt btrees.

Presently, mount time log reservation includes block count required for a
single split of the dabtree. The dabtree block count is also taken into
account by xfs_attr_calc_size().

Also, AGF log space reservation isn't accounted for.

Due to the reasons mentioned above, log reservation calculation for xattr
insert operation gives an incorrect value.

Apart from the above, xfs_log_calc_max_attrsetm_res() passes byte count as
an argument to XFS_NEXTENTADD_SPACE_RES() instead of block count.

To fix these issues, this commit changes xfs_attr_calc_size() to also
calculate the number of dabtree blocks that need to be logged.

xfs_attr_set() uses the following values computed by xfs_attr_calc_size()
1. The number of dabtree blocks that need to be logged.
2. The number of remote blocks that need to be allocated.
3. The number of dabtree blocks that need to be allocated.
4. The number of bmbt blocks that need to be allocated.
5. The total number of blocks that need to be allocated.

... to compute number of bytes that need to be reserved in the log.

This commit also modifies xfs_log_calc_max_attrsetm_res() to invoke
xfs_attr_calc_size() to obtain the number of blocks to be logged which it uses
to figure out the total number of bytes to be logged.

Signed-off-by: Chandan Rajendra <chandanrlinux@gmail.com>
---
 fs/xfs/libxfs/xfs_attr.c       |  7 +++--
 fs/xfs/libxfs/xfs_attr.h       |  3 ++
 fs/xfs/libxfs/xfs_log_rlimit.c | 16 +++++------
 fs/xfs/libxfs/xfs_trans_resv.c | 50 ++++++++++++++++------------------
 fs/xfs/libxfs/xfs_trans_resv.h |  2 ++
 5 files changed, 41 insertions(+), 37 deletions(-)

diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c
index 1d62ce80d7949..f056f8597ee03 100644
--- a/fs/xfs/libxfs/xfs_attr.c
+++ b/fs/xfs/libxfs/xfs_attr.c
@@ -182,9 +182,12 @@ xfs_attr_calc_size(
 	size = xfs_attr_leaf_newentsize(mp->m_attr_geo, namelen, valuelen,
 			local);
 	resv->total_dablks = XFS_DAENTER_BLOCKS(mp, XFS_ATTR_FORK);
+	resv->log_dablks = 2 * resv->total_dablks;
+
 	if (*local) {
 		if (size > (blksize / 2)) {
 			/* Double split possible */
+			resv->log_dablks += resv->total_dablks;
 			resv->total_dablks *= 2;
 		}
 		resv->rmt_blks = 0;
@@ -349,9 +352,7 @@ xfs_attr_set(
 				return error;
 		}
 
-		tres.tr_logres = M_RES(mp)->tr_attrsetm.tr_logres +
-				 M_RES(mp)->tr_attrsetrt.tr_logres *
-					args->total;
+		tres.tr_logres = xfs_calc_attr_res(mp, &resv);
 		tres.tr_logcount = XFS_ATTRSET_LOG_COUNT;
 		tres.tr_logflags = XFS_TRANS_PERM_LOG_RES;
 		total = args->total;
diff --git a/fs/xfs/libxfs/xfs_attr.h b/fs/xfs/libxfs/xfs_attr.h
index 0e387230744c3..83508148bbd12 100644
--- a/fs/xfs/libxfs/xfs_attr.h
+++ b/fs/xfs/libxfs/xfs_attr.h
@@ -74,6 +74,9 @@ struct xfs_attr_list_context {
 };
 
 struct xfs_attr_set_resv {
+	/* Number of blocks in the da btree that we might need to log. */
+	unsigned int		log_dablks;
+
 	/* Number of unlogged blocks needed to store the remote attr value. */
 	unsigned int		rmt_blks;
 
diff --git a/fs/xfs/libxfs/xfs_log_rlimit.c b/fs/xfs/libxfs/xfs_log_rlimit.c
index 7f55eb3f36536..a132ffa7adf32 100644
--- a/fs/xfs/libxfs/xfs_log_rlimit.c
+++ b/fs/xfs/libxfs/xfs_log_rlimit.c
@@ -10,6 +10,7 @@
 #include "xfs_log_format.h"
 #include "xfs_trans_resv.h"
 #include "xfs_mount.h"
+#include "xfs_attr.h"
 #include "xfs_da_format.h"
 #include "xfs_trans_space.h"
 #include "xfs_da_btree.h"
@@ -21,19 +22,18 @@
  */
 STATIC int
 xfs_log_calc_max_attrsetm_res(
-	struct xfs_mount	*mp)
+	struct xfs_mount		*mp)
 {
-	int			size;
-	int			nblks;
+	struct xfs_attr_set_resv	resv;
+	int				size;
+	int				local;
 
 	size = xfs_attr_leaf_entsize_local_max(mp->m_attr_geo->blksize) -
 	       MAXNAMELEN - 1;
-	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
-	nblks += XFS_B_TO_FSB(mp, size);
-	nblks += XFS_NEXTENTADD_SPACE_RES(mp, size, XFS_ATTR_FORK);
+	xfs_attr_calc_size(mp, &resv, size, 0, &local);
+	ASSERT(local == 1);
 
-	return  M_RES(mp)->tr_attrsetm.tr_logres +
-		M_RES(mp)->tr_attrsetrt.tr_logres * nblks;
+	return xfs_calc_attr_res(mp, &resv);
 }
 
 /*
diff --git a/fs/xfs/libxfs/xfs_trans_resv.c b/fs/xfs/libxfs/xfs_trans_resv.c
index 7a9c04920505a..c6b8cd56df2d7 100644
--- a/fs/xfs/libxfs/xfs_trans_resv.c
+++ b/fs/xfs/libxfs/xfs_trans_resv.c
@@ -19,6 +19,7 @@
 #include "xfs_trans.h"
 #include "xfs_qm.h"
 #include "xfs_trans_space.h"
+#include "xfs_attr.h"
 
 #define _ALLOC	true
 #define _FREE	false
@@ -701,12 +702,10 @@ xfs_calc_attrinval_reservation(
  * Setting an attribute at mount time.
  *	the inode getting the attribute
  *	the superblock for allocations
- *	the agfs extents are allocated from
- *	the attribute btree * max depth
- *	the inode allocation btree
+ *	the agf extents are allocated from
  * Since attribute transaction space is dependent on the size of the attribute,
  * the calculation is done partially at mount time and partially at runtime(see
- * below).
+ * xfs_attr_calc_size()).
  */
 STATIC uint
 xfs_calc_attrsetm_reservation(
@@ -714,27 +713,7 @@ xfs_calc_attrsetm_reservation(
 {
 	return XFS_DQUOT_LOGRES(mp) +
 		xfs_calc_inode_res(mp, 1) +
-		xfs_calc_buf_res(1, mp->m_sb.sb_sectsize) +
-		xfs_calc_buf_res(XFS_DA_NODE_MAXDEPTH, XFS_FSB_TO_B(mp, 1));
-}
-
-/*
- * Setting an attribute at runtime, transaction space unit per block.
- * 	the superblock for allocations: sector size
- *	the inode bmap btree could join or split: max depth * block size
- * Since the runtime attribute transaction space is dependent on the total
- * blocks needed for the 1st bmap, here we calculate out the space unit for
- * one block so that the caller could figure out the total space according
- * to the attibute extent length in blocks by:
- *	ext * M_RES(mp)->tr_attrsetrt.tr_logres
- */
-STATIC uint
-xfs_calc_attrsetrt_reservation(
-	struct xfs_mount	*mp)
-{
-	return xfs_calc_buf_res(1, mp->m_sb.sb_sectsize) +
-		xfs_calc_buf_res(XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK),
-				 XFS_FSB_TO_B(mp, 1));
+		xfs_calc_buf_res(2, mp->m_sb.sb_sectsize);
 }
 
 /*
@@ -832,6 +811,25 @@ xfs_calc_sb_reservation(
 	return xfs_calc_buf_res(1, mp->m_sb.sb_sectsize);
 }
 
+uint
+xfs_calc_attr_res(
+	struct xfs_mount		*mp,
+	struct xfs_attr_set_resv	*resv)
+{
+	unsigned int			space_blks;
+	unsigned int			attr_res;
+
+	space_blks = xfs_allocfree_log_count(mp,
+		resv->total_dablks + resv->bmbt_blks);
+
+	attr_res = M_RES(mp)->tr_attrsetm.tr_logres +
+		xfs_calc_buf_res(resv->log_dablks, mp->m_attr_geo->blksize) +
+		xfs_calc_buf_res(resv->bmbt_blks, mp->m_sb.sb_blocksize) +
+		xfs_calc_buf_res(space_blks, mp->m_sb.sb_blocksize);
+
+	return attr_res;
+}
+
 void
 xfs_trans_resv_calc(
 	struct xfs_mount	*mp,
@@ -942,7 +940,7 @@ xfs_trans_resv_calc(
 	resp->tr_ichange.tr_logres = xfs_calc_ichange_reservation(mp);
 	resp->tr_fsyncts.tr_logres = xfs_calc_swrite_reservation(mp);
 	resp->tr_writeid.tr_logres = xfs_calc_writeid_reservation(mp);
-	resp->tr_attrsetrt.tr_logres = xfs_calc_attrsetrt_reservation(mp);
+	resp->tr_attrsetrt.tr_logres = 0;
 	resp->tr_clearagi.tr_logres = xfs_calc_clear_agi_bucket_reservation(mp);
 	resp->tr_growrtzero.tr_logres = xfs_calc_growrtzero_reservation(mp);
 	resp->tr_growrtfree.tr_logres = xfs_calc_growrtfree_reservation(mp);
diff --git a/fs/xfs/libxfs/xfs_trans_resv.h b/fs/xfs/libxfs/xfs_trans_resv.h
index 7241ab28cf84f..3a6a0bf21e9b1 100644
--- a/fs/xfs/libxfs/xfs_trans_resv.h
+++ b/fs/xfs/libxfs/xfs_trans_resv.h
@@ -7,6 +7,7 @@
 #define	__XFS_TRANS_RESV_H__
 
 struct xfs_mount;
+struct xfs_attr_set_resv;
 
 /*
  * structure for maintaining pre-calculated transaction reservations.
@@ -91,6 +92,7 @@ struct xfs_trans_resv {
 #define	XFS_ATTRSET_LOG_COUNT		3
 #define	XFS_ATTRRM_LOG_COUNT		3
 
+uint xfs_calc_attr_res(struct xfs_mount *mp, struct xfs_attr_set_resv *resv);
 void xfs_trans_resv_calc(struct xfs_mount *mp, struct xfs_trans_resv *resp);
 uint xfs_allocfree_log_count(struct xfs_mount *mp, uint num_ops);
 
-- 
2.19.1


  parent reply	other threads:[~2020-02-24  3:58 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-24  4:00 [PATCH V4 RESEND 0/7] Fix log reservation calculation for xattr insert operation Chandan Rajendra
2020-02-24  4:00 ` [PATCH V4 RESEND 1/7] xfs: Pass xattr name and value length explicitly to xfs_attr_leaf_newentsize Chandan Rajendra
2020-02-25 16:11   ` Brian Foster
2020-02-26 16:58   ` Christoph Hellwig
2020-02-27  9:27     ` Chandan Rajendra
2020-02-24  4:00 ` [PATCH V4 RESEND 2/7] xfs: xfs_attr_calc_size: Use local variables to track individual space components Chandan Rajendra
2020-02-25 16:11   ` Brian Foster
2020-02-26 10:38     ` Chandan Rajendra
2020-02-24  4:00 ` [PATCH V4 RESEND 3/7] xfs: xfs_attr_calc_size: Calculate Bmbt blks only once Chandan Rajendra
2020-02-25 16:11   ` Brian Foster
2020-02-26 15:03     ` Chandan Rajendra
2020-02-26 16:42       ` Brian Foster
2020-02-27  8:59         ` Chandan Rajendra
2020-02-27 11:53           ` Brian Foster
2020-02-27 13:38             ` Chandan Rajendra
2020-02-24  4:00 ` [PATCH V4 RESEND 4/7] xfs: Introduce struct xfs_attr_set_resv Chandan Rajendra
2020-02-25 16:27   ` Brian Foster
2020-02-26 10:40     ` Chandan Rajendra
2020-02-24  4:00 ` [PATCH V4 RESEND 5/7] xfs: xfs_attr_calc_size: Explicitly pass mp, namelen and valuelen args Chandan Rajendra
2020-02-25 16:27   ` Brian Foster
2020-02-24  4:00 ` [PATCH V4 RESEND 6/7] xfs: Make xfs_attr_calc_size() non-static Chandan Rajendra
2020-02-25 16:24   ` Darrick J. Wong
2020-02-24  4:00 ` Chandan Rajendra [this message]
2020-02-25 17:19   ` [PATCH V4 RESEND 7/7] xfs: Fix log reservation calculation for xattr insert operation Brian Foster
2020-02-26 11:21     ` Chandan Rajendra
2020-02-26 18:50       ` Brian Foster
2020-02-27  9:14         ` Chandan Rajendra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200224040044.30923-8-chandanrlinux@gmail.com \
    --to=chandanrlinux@gmail.com \
    --cc=amir73il@gmail.com \
    --cc=bfoster@redhat.com \
    --cc=chandan@linux.ibm.com \
    --cc=darrick.wong@oracle.com \
    --cc=david@fromorbit.com \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.