All of lore.kernel.org
 help / color / mirror / Atom feed
From: Janosch Frank <frankja@linux.ibm.com>
To: qemu-devel@nongnu.org
Cc: borntraeger@de.ibm.com, qemu-s390x@nongnu.org, cohuck@redhat.com,
	david@redhat.com
Subject: [PATCH v5 03/18] s390x: protvirt: Add diag308 subcodes 8 - 10
Date: Wed, 26 Feb 2020 07:20:23 -0500	[thread overview]
Message-ID: <20200226122038.61481-4-frankja@linux.ibm.com> (raw)
In-Reply-To: <20200226122038.61481-1-frankja@linux.ibm.com>

For diag308 subcodes 8 - 10 we have a new ipib of type 5. The ipib
holds the address and length of the secure execution header, as well
as a list of guest components.

Each component is a block of memory, for example kernel or initrd,
which needs to be decrypted by the Ultravisor in order to run a
protected VM. The secure execution header instructs the Ultravisor on
how to handle the protected VM and its components.

Subcodes 8 and 9 are similiar to 5 and 6 and subcode 10 will finally
start the protected guest.

Subcodes 8-10 are not valid in protected mode, we have to do a subcode
3 and then the 8 and 10 combination for a protected reboot.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
---
 hw/s390x/ipl.c      | 47 ++++++++++++++++++++++++++++++++++++++++++---
 hw/s390x/ipl.h      | 31 ++++++++++++++++++++++++++++++
 target/s390x/diag.c | 27 +++++++++++++++++++++++---
 3 files changed, 99 insertions(+), 6 deletions(-)

diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
index 42e21e7a6a..a017b3edda 100644
--- a/hw/s390x/ipl.c
+++ b/hw/s390x/ipl.c
@@ -538,15 +538,55 @@ static bool is_virtio_scsi_device(IplParameterBlock *iplb)
     return is_virtio_ccw_device_of_type(iplb, VIRTIO_ID_SCSI);
 }
 
+int s390_ipl_pv_check_components(IplParameterBlock *iplb)
+{
+    int i;
+    IPLBlockPV *ipib_pv = &iplb->pv;
+
+    if (ipib_pv->num_comp == 0) {
+        return -EINVAL;
+    }
+
+    for (i = 0; i < ipib_pv->num_comp; i++) {
+        /* Addr must be 4k aligned */
+        if (ipib_pv->components[i].addr & ~TARGET_PAGE_MASK) {
+            return -EINVAL;
+        }
+
+        /* Tweak prefix is monotonously increasing with each component */
+        if (i < ipib_pv->num_comp - 1 &&
+            ipib_pv->components[i].tweak_pref >
+            ipib_pv->components[i + 1].tweak_pref) {
+            return -EINVAL;
+        }
+    }
+    return 0;
+}
+
 void s390_ipl_update_diag308(IplParameterBlock *iplb)
 {
     S390IPLState *ipl = get_ipl_device();
 
-    ipl->iplb = *iplb;
-    ipl->iplb_valid = true;
+    if (iplb->pbt == S390_IPL_TYPE_PV) {
+        ipl->iplb_pv = *iplb;
+        ipl->iplb_valid_pv = true;
+    } else {
+        ipl->iplb = *iplb;
+        ipl->iplb_valid = true;
+    }
     ipl->netboot = is_virtio_net_device(iplb);
 }
 
+IplParameterBlock *s390_ipl_get_iplb_secure(void)
+{
+    S390IPLState *ipl = get_ipl_device();
+
+    if (!ipl->iplb_valid_pv) {
+        return NULL;
+    }
+    return &ipl->iplb_pv;
+}
+
 IplParameterBlock *s390_ipl_get_iplb(void)
 {
     S390IPLState *ipl = get_ipl_device();
@@ -561,7 +601,8 @@ void s390_ipl_reset_request(CPUState *cs, enum s390_reset reset_type)
 {
     S390IPLState *ipl = get_ipl_device();
 
-    if (reset_type == S390_RESET_EXTERNAL || reset_type == S390_RESET_REIPL) {
+    if (reset_type == S390_RESET_EXTERNAL || reset_type == S390_RESET_REIPL ||
+        reset_type == S390_RESET_PV) {
         /* use CPU 0 for full resets */
         ipl->reset_cpu_index = 0;
     } else {
diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h
index d4813105db..3c4bb66eda 100644
--- a/hw/s390x/ipl.h
+++ b/hw/s390x/ipl.h
@@ -15,6 +15,23 @@
 #include "cpu.h"
 #include "hw/qdev-core.h"
 
+struct IPLBlockPVComp {
+    uint64_t tweak_pref;
+    uint64_t addr;
+    uint64_t size;
+} QEMU_PACKED;
+typedef struct IPLBlockPVComp IPLBlockPVComp;
+
+struct IPLBlockPV {
+    uint8_t  reserved[87];
+    uint8_t  version;
+    uint32_t num_comp;
+    uint64_t pv_header_addr;
+    uint64_t pv_header_len;
+    struct IPLBlockPVComp components[];
+} QEMU_PACKED;
+typedef struct IPLBlockPV IPLBlockPV;
+
 struct IplBlockCcw {
     uint8_t  reserved0[85];
     uint8_t  ssid;
@@ -71,6 +88,7 @@ union IplParameterBlock {
         union {
             IplBlockCcw ccw;
             IplBlockFcp fcp;
+            IPLBlockPV pv;
             IplBlockQemuScsi scsi;
         };
     } QEMU_PACKED;
@@ -84,9 +102,11 @@ union IplParameterBlock {
 typedef union IplParameterBlock IplParameterBlock;
 
 int s390_ipl_set_loadparm(uint8_t *loadparm);
+int s390_ipl_pv_check_components(IplParameterBlock *iplb);
 void s390_ipl_update_diag308(IplParameterBlock *iplb);
 void s390_ipl_prepare_cpu(S390CPU *cpu);
 IplParameterBlock *s390_ipl_get_iplb(void);
+IplParameterBlock *s390_ipl_get_iplb_secure(void);
 
 enum s390_reset {
     /* default is a reset not triggered by a CPU e.g. issued by QMP */
@@ -94,6 +114,7 @@ enum s390_reset {
     S390_RESET_REIPL,
     S390_RESET_MODIFIED_CLEAR,
     S390_RESET_LOAD_NORMAL,
+    S390_RESET_PV,
 };
 void s390_ipl_reset_request(CPUState *cs, enum s390_reset reset_type);
 void s390_ipl_get_reset_request(CPUState **cs, enum s390_reset *reset_type);
@@ -133,6 +154,7 @@ struct S390IPLState {
     /*< private >*/
     DeviceState parent_obj;
     IplParameterBlock iplb;
+    IplParameterBlock iplb_pv;
     QemuIplParameters qipl;
     uint64_t start_addr;
     uint64_t compat_start_addr;
@@ -140,6 +162,7 @@ struct S390IPLState {
     uint64_t compat_bios_start_addr;
     bool enforce_bios;
     bool iplb_valid;
+    bool iplb_valid_pv;
     bool netboot;
     /* reset related properties don't have to be migrated or reset */
     enum s390_reset reset_type;
@@ -161,9 +184,11 @@ QEMU_BUILD_BUG_MSG(offsetof(S390IPLState, iplb) & 3, "alignment of iplb wrong");
 
 #define S390_IPL_TYPE_FCP 0x00
 #define S390_IPL_TYPE_CCW 0x02
+#define S390_IPL_TYPE_PV 0x05
 #define S390_IPL_TYPE_QEMU_SCSI 0xff
 
 #define S390_IPLB_HEADER_LEN 8
+#define S390_IPLB_MIN_PV_LEN 148
 #define S390_IPLB_MIN_CCW_LEN 200
 #define S390_IPLB_MIN_FCP_LEN 384
 #define S390_IPLB_MIN_QEMU_SCSI_LEN 200
@@ -185,4 +210,10 @@ static inline bool iplb_valid_fcp(IplParameterBlock *iplb)
            iplb->pbt == S390_IPL_TYPE_FCP;
 }
 
+static inline bool iplb_valid_pv(IplParameterBlock *iplb)
+{
+    return be32_to_cpu(iplb->len) >= S390_IPLB_MIN_PV_LEN &&
+           iplb->pbt == S390_IPL_TYPE_PV;
+}
+
 #endif
diff --git a/target/s390x/diag.c b/target/s390x/diag.c
index b5aec06d6b..d6ceb1f75d 100644
--- a/target/s390x/diag.c
+++ b/target/s390x/diag.c
@@ -52,6 +52,8 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1, uint64_t r3)
 #define DIAG_308_RC_OK              0x0001
 #define DIAG_308_RC_NO_CONF         0x0102
 #define DIAG_308_RC_INVALID         0x0402
+#define DIAG_308_RC_NO_PV_CONF      0x0a02
+#define DIAG_308_RC_INVAL_FOR_PV    0x0b02
 
 #define DIAG308_RESET_MOD_CLR       0
 #define DIAG308_RESET_LOAD_NORM     1
@@ -59,6 +61,9 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1, uint64_t r3)
 #define DIAG308_LOAD_NORMAL_DUMP    4
 #define DIAG308_SET                 5
 #define DIAG308_STORE               6
+#define DIAG308_PV_SET              8
+#define DIAG308_PV_STORE            9
+#define DIAG308_PV_START            10
 
 static int diag308_parm_check(CPUS390XState *env, uint64_t r1, uint64_t addr,
                               uintptr_t ra, bool write)
@@ -105,6 +110,7 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra)
         s390_ipl_reset_request(cs, S390_RESET_REIPL);
         break;
     case DIAG308_SET:
+    case DIAG308_PV_SET:
         if (diag308_parm_check(env, r1, addr, ra, false)) {
             return;
         }
@@ -117,7 +123,8 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t ra)
 
         cpu_physical_memory_read(addr, iplb, be32_to_cpu(iplb->len));
 
-        if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb)) {
+        if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb) &&
+            !(iplb_valid_pv(iplb) && !s390_ipl_pv_check_components(iplb))) {
             env->regs[r1 + 1] = DIAG_308_RC_INVALID;
             goto out;
         }
@@ -128,17 +135,31 @@ out:
         g_free(iplb);
         return;
     case DIAG308_STORE:
+    case DIAG308_PV_STORE:
         if (diag308_parm_check(env, r1, addr, ra, true)) {
             return;
         }
-        iplb = s390_ipl_get_iplb();
+        if (subcode == DIAG308_PV_STORE) {
+            iplb = s390_ipl_get_iplb_secure();
+        } else {
+            iplb = s390_ipl_get_iplb();
+        }
         if (iplb) {
             cpu_physical_memory_write(addr, iplb, be32_to_cpu(iplb->len));
             env->regs[r1 + 1] = DIAG_308_RC_OK;
         } else {
             env->regs[r1 + 1] = DIAG_308_RC_NO_CONF;
         }
-        return;
+        break;
+    case DIAG308_PV_START:
+        iplb = s390_ipl_get_iplb_secure();
+        if (!iplb || !iplb_valid_pv(iplb)) {
+            env->regs[r1 + 1] = DIAG_308_RC_NO_PV_CONF;
+            return;
+        }
+
+        s390_ipl_reset_request(cs, S390_RESET_PV);
+        break;
     default:
         s390_program_interrupt(env, PGM_SPECIFICATION, ra);
         break;
-- 
2.20.1



  parent reply	other threads:[~2020-02-26 12:21 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-26 12:20 [PATCH v5 00/18] s390x: Protected Virtualization support Janosch Frank
2020-02-26 12:20 ` [PATCH v5 01/18] s390x: Use constant for ESA PSW address Janosch Frank
2020-02-26 13:46   ` Christian Borntraeger
2020-02-26 13:47     ` Janosch Frank
2020-02-26 14:27   ` David Hildenbrand
2020-02-26 17:51     ` Cornelia Huck
2020-02-26 17:52       ` David Hildenbrand
2020-02-27  7:53       ` Janosch Frank
2020-02-27  8:09         ` Janosch Frank
2020-02-27  9:06           ` Cornelia Huck
2020-02-27  9:23             ` [PATCH v6] s390x: Rename and use constants for short PSW address and mask Janosch Frank
2020-02-27  9:27               ` David Hildenbrand
2020-02-27 10:36               ` Cornelia Huck
2020-02-26 12:20 ` [PATCH v5 02/18] Sync pv Janosch Frank
2020-02-26 12:20 ` Janosch Frank [this message]
2020-02-26 12:20 ` [PATCH v5 04/18] s390x: protvirt: Support unpack facility Janosch Frank
2020-02-26 12:20 ` [PATCH v5 05/18] s390x: protvirt: Add migration blocker Janosch Frank
2020-02-26 14:05   ` Christian Borntraeger
2020-02-26 14:08     ` Janosch Frank
2020-02-26 12:20 ` [PATCH v5 06/18] s390x: protvirt: Handle diag 308 subcodes 0,1,3,4 Janosch Frank
2020-02-26 15:00   ` Christian Borntraeger
2020-02-26 15:11     ` Janosch Frank
2020-02-26 12:20 ` [PATCH v5 07/18] s390x: protvirt: Inhibit balloon when switching to protected mode Janosch Frank
2020-02-26 14:59   ` David Hildenbrand
2020-02-26 15:06     ` Christian Borntraeger
2020-02-26 15:16       ` David Hildenbrand
2020-02-26 15:30         ` Janosch Frank
2020-02-26 15:31           ` David Hildenbrand
2020-02-26 18:24           ` Cornelia Huck
2020-03-03 12:42             ` Christian Borntraeger
2020-02-26 15:11     ` Janosch Frank
2020-02-26 15:13       ` Christian Borntraeger
2020-02-26 15:15         ` David Hildenbrand
2020-02-27 12:24       ` Halil Pasic
2020-03-19 13:42         ` Halil Pasic
2020-03-19 13:54         ` David Hildenbrand
2020-03-19 15:40           ` Halil Pasic
2020-03-19 17:31             ` David Hildenbrand
2020-03-20 18:43               ` Halil Pasic
2020-03-24 21:07                 ` Brijesh Singh
2020-03-27 10:50                 ` David Hildenbrand
2020-03-19 17:45           ` Michael S. Tsirkin
2020-03-20  9:36             ` David Hildenbrand
2020-03-29 14:48               ` Michael S. Tsirkin
2020-03-31  8:59                 ` David Hildenbrand
2020-02-26 12:20 ` [PATCH v5 08/18] s390x: protvirt: KVM intercept changes Janosch Frank
2020-02-26 12:20 ` [PATCH v5 09/18] s390x: Add SIDA memory ops Janosch Frank
2020-02-26 12:20 ` [PATCH v5 10/18] s390x: protvirt: Move STSI data over SIDAD Janosch Frank
2020-02-26 12:20 ` [PATCH v5 11/18] s390x: protvirt: SCLP interpretation Janosch Frank
2020-02-26 12:20 ` [PATCH v5 12/18] s390x: protvirt: Set guest IPL PSW Janosch Frank
2020-02-26 12:20 ` [PATCH v5 13/18] s390x: protvirt: Move diag 308 data over SIDAD Janosch Frank
2020-02-26 12:20 ` [PATCH v5 14/18] s390x: protvirt: Disable address checks for PV guest IO emulation Janosch Frank
2020-02-26 12:20 ` [PATCH v5 15/18] s390x: protvirt: Move IO control structures over SIDA Janosch Frank
2020-02-26 12:20 ` [PATCH v5 16/18] s390x: protvirt: Handle SIGP store status correctly Janosch Frank
2020-02-26 12:20 ` [PATCH v5 17/18] s390x: Add unpack facility feature to GA1 Janosch Frank
2020-02-26 12:20 ` [PATCH v5 18/18] docs: Add protvirt docs Janosch Frank
2020-02-26 20:09 ` [PATCH v5 00/18] s390x: Protected Virtualization support Cornelia Huck
2020-02-27  8:32   ` Janosch Frank
2020-03-03 15:50 ` [PATCH] pc-bios: s390x: Save iplb location in lowcore Janosch Frank
2020-03-03 16:13   ` David Hildenbrand
2020-03-04  8:59     ` Janosch Frank
2020-03-04  9:05       ` David Hildenbrand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200226122038.61481-4-frankja@linux.ibm.com \
    --to=frankja@linux.ibm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.