All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Paul E. McKenney" <paulmck@kernel.org>
To: Uladzislau Rezki <urezki@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>,
	"Theodore Y. Ts'o" <tytso@mit.edu>,
	Ext4 Developers List <linux-ext4@vger.kernel.org>,
	Suraj Jitindar Singh <surajjs@amazon.com>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH RFC] ext4: fix potential race between online resizing and write operations
Date: Wed, 26 Feb 2020 07:06:56 -0800	[thread overview]
Message-ID: <20200226150656.GB2935@paulmck-ThinkPad-P72> (raw)
In-Reply-To: <20200226130440.GA30008@pc636>

On Wed, Feb 26, 2020 at 02:04:40PM +0100, Uladzislau Rezki wrote:
> On Tue, Feb 25, 2020 at 02:47:45PM -0800, Paul E. McKenney wrote:
> > On Tue, Feb 25, 2020 at 07:54:00PM +0100, Uladzislau Rezki wrote:
> > > > > > > I was thinking a 2 fold approach (just thinking out loud..):
> > > > > > > 
> > > > > > > If kfree_call_rcu() is called in atomic context or in any rcu reader, then
> > > > > > > use GFP_ATOMIC to grow an rcu_head wrapper on the atomic memory pool and
> > > > > > > queue that.
> > > > > > > 
> > > > > I am not sure if that is acceptable, i mean what to do when GFP_ATOMIC
> > > > > gets failed in atomic context? Or we can just consider it as out of
> > > > > memory and another variant is to say that headless object can be called
> > > > > from preemptible context only.
> > > > 
> > > > Yes that makes sense, and we can always put disclaimer in the API's comments
> > > > saying if this object is expected to be freed a lot, then don't use the
> > > > headless-API to be extra safe.
> > > > 
> > > Agree.
> > > 
> > > > BTW, GFP_ATOMIC the documentation says if GFP_ATOMIC reserves are depleted,
> > > > the kernel can even panic some times, so if GFP_ATOMIC allocation fails, then
> > > > there seems to be bigger problems in the system any way. I would say let us
> > > > write a patch to allocate there and see what the -mm guys think.
> > > > 
> > > OK. It might be that they can offer something if they do not like our
> > > approach. I will try to compose something and send the patch to see.
> > > The tree.c implementation is almost done, whereas tiny one is on hold.
> > > 
> > > I think we should support batching as well as bulk interface there.
> > > Another way is to workaround head-less object, just to attach the head
> > > dynamically using kmalloc() and then call_rcu() but then it will not be
> > > a fair headless support :)
> > > 
> > > What is your view?
> > > 
> > > > > > > Otherwise, grow an rcu_head on the stack of kfree_call_rcu() and call
> > > > > > > synchronize_rcu() inline with it.
> > > > > > > 
> > > > > > >
> > > > > What do you mean here, Joel? "grow an rcu_head on the stack"?
> > > > 
> > > > By "grow on the stack", use the compiler-allocated rcu_head on the
> > > > kfree_rcu() caller's stack.
> > > > 
> > > > I meant here to say, if we are not in atomic context, then we use regular
> > > > GFP_KERNEL allocation, and if that fails, then we just use the stack's
> > > > rcu_head and call synchronize_rcu() or even synchronize_rcu_expedited since
> > > > the allocation failure would mean the need for RCU to free some memory is
> > > > probably great.
> > > > 
> > > Ah, i got it. I thought you meant something like recursion and then
> > > unwinding the stack back somehow :)
> > > 
> > > > > > > Use preemptible() andr task_struct's rcu_read_lock_nesting to differentiate
> > > > > > > between the 2 cases.
> > > > > > > 
> > > > > If the current context is preemptable then we can inline synchronize_rcu()
> > > > > together with freeing to handle such corner case, i mean when we are run
> > > > > out of memory.
> > > > 
> > > > Ah yes, exactly what I mean.
> > > > 
> > > OK.
> > > 
> > > > > As for "task_struct's rcu_read_lock_nesting". Will it be enough just
> > > > > have a look at preempt_count of current process? If we have for example
> > > > > nested rcu_read_locks:
> > > > > 
> > > > > <snip>
> > > > > rcu_read_lock()
> > > > >     rcu_read_lock()
> > > > >         rcu_read_lock()
> > > > > <snip>
> > > > > 
> > > > > the counter would be 3.
> > > > 
> > > > No, because preempt_count is not incremented during rcu_read_lock(). RCU
> > > > reader sections can be preempted, they just cannot goto sleep in a reader
> > > > section (unless the kernel is RT).
> > > > 
> > > So in CONFIG_PREEMPT kernel we can identify if we are in atomic or not by
> > > using rcu_preempt_depth() and in_atomic(). When it comes to !CONFIG_PREEMPT
> > > then we skip it and consider as atomic. Something like:
> > > 
> > > <snip>
> > > static bool is_current_in_atomic()
> > > {
> > > #ifdef CONFIG_PREEMPT_RCU
> > 
> > If possible: if (IS_ENABLED(CONFIG_PREEMPT_RCU))
> > 
> > Much nicer than #ifdef, and I -think- it should work in this case.
> > 
> OK. Thank you, Paul!
> 
> There is one point i would like to highlight it is about making caller
> instead to be responsible for atomic or not decision. Like how kmalloc()
> works, it does not really know the context it runs on, so it is up to
> caller to inform.
> 
> The same way:
> 
> kvfree_rcu(p, atomic = true/false);
> 
> in this case we could cover !CONFIG_PREEMPT case also.

Understood, but couldn't we instead use IS_ENABLED() to work out the
actual situation at runtime and relieve the caller of this burden?
Or am I missing a corner case?

							Thanx, Paul

  reply	other threads:[~2020-02-26 15:07 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-15 23:38 [PATCH RFC] ext4: fix potential race between online resizing and write operations Theodore Y. Ts'o
2020-02-16 12:12 ` Paul E. McKenney
2020-02-16 20:32   ` Theodore Y. Ts'o
2020-02-17 16:08   ` Uladzislau Rezki
2020-02-17 19:33     ` Theodore Y. Ts'o
2020-02-18 17:08       ` Uladzislau Rezki
2020-02-20  4:52         ` Theodore Y. Ts'o
2020-02-21  0:30           ` Paul E. McKenney
2020-02-21 13:14             ` Uladzislau Rezki
2020-02-21 20:22               ` Paul E. McKenney
2020-02-22 22:24                 ` Joel Fernandes
2020-02-23  1:10                   ` Paul E. McKenney
2020-02-24 17:40                     ` Uladzislau Rezki
2020-02-25  2:07                       ` Joel Fernandes
2020-02-25  3:55                         ` Paul E. McKenney
2020-02-25 14:17                           ` Joel Fernandes
2020-02-25 16:38                             ` Paul E. McKenney
2020-02-25 17:00                               ` Joel Fernandes
2020-02-25 18:54                         ` Uladzislau Rezki
2020-02-25 22:47                           ` Paul E. McKenney
2020-02-26 13:04                             ` Uladzislau Rezki
2020-02-26 15:06                               ` Paul E. McKenney [this message]
2020-02-26 15:53                                 ` Uladzislau Rezki
2020-02-27 14:08                                   ` Joel Fernandes
2020-03-01 11:13                                     ` Uladzislau Rezki
2020-02-27 13:37                           ` Joel Fernandes
2020-03-01 11:08                             ` Uladzislau Rezki
2020-03-01 12:07                               ` Uladzislau Rezki
2020-02-25  2:11                     ` Joel Fernandes
2020-02-21 12:06         ` Joel Fernandes
2020-02-21 13:28           ` Joel Fernandes
2020-02-21 19:21             ` Uladzislau Rezki
2020-02-21 19:25               ` Uladzislau Rezki
2020-02-22 22:12               ` Joel Fernandes
2020-02-24 17:02                 ` Uladzislau Rezki
2020-02-24 23:14                   ` Paul E. McKenney
2020-02-25  1:48                   ` Joel Fernandes
2020-02-19  3:09 ` Jitindar SIngh, Suraj
2020-02-20  4:34   ` Theodore Y. Ts'o

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200226150656.GB2935@paulmck-ThinkPad-P72 \
    --to=paulmck@kernel.org \
    --cc=joel@joelfernandes.org \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=surajjs@amazon.com \
    --cc=tytso@mit.edu \
    --cc=urezki@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.