From: Martin Kepplinger <martin.kepplinger@puri.sm> To: robh@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com Cc: linux-imx@nxp.com, Anson.Huang@nxp.com, devicetree@vger.kernel.org, kernel@puri.sm, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, "Angus Ainslie (Purism)" <angus@akkea.ca>, Martin Kepplinger <martin.kepplinger@puri.sm> Subject: [PATCH v4 4/8] arm64: dts: librem5-devkit: allow modem to wake the system from suspend Date: Thu, 27 Feb 2020 14:17:29 +0100 [thread overview] Message-ID: <20200227131733.4228-5-martin.kepplinger@puri.sm> (raw) In-Reply-To: <20200227131733.4228-1-martin.kepplinger@puri.sm> From: "Angus Ainslie (Purism)" <angus@akkea.ca> Connect the WoWWAN signal to a gpio key to wake up the system from suspend. Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> --- .../arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 84443e4857d5..823d5c60a8fa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -55,6 +55,15 @@ wakeup-source; linux,code = <KEY_HP>; }; + + wwan-wake { + label = "WWAN_WAKE"; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <8 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_PHONE>; + }; }; leds { @@ -576,6 +585,7 @@ MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */ + MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ >; }; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Martin Kepplinger <martin.kepplinger@puri.sm> To: robh@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com Cc: devicetree@vger.kernel.org, kernel@puri.sm, Anson.Huang@nxp.com, Martin Kepplinger <martin.kepplinger@puri.sm>, "Angus Ainslie \(Purism\)" <angus@akkea.ca>, linux-kernel@vger.kernel.org, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 4/8] arm64: dts: librem5-devkit: allow modem to wake the system from suspend Date: Thu, 27 Feb 2020 14:17:29 +0100 [thread overview] Message-ID: <20200227131733.4228-5-martin.kepplinger@puri.sm> (raw) In-Reply-To: <20200227131733.4228-1-martin.kepplinger@puri.sm> From: "Angus Ainslie (Purism)" <angus@akkea.ca> Connect the WoWWAN signal to a gpio key to wake up the system from suspend. Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> --- .../arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 84443e4857d5..823d5c60a8fa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -55,6 +55,15 @@ wakeup-source; linux,code = <KEY_HP>; }; + + wwan-wake { + label = "WWAN_WAKE"; + gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <8 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_PHONE>; + }; }; leds { @@ -576,6 +585,7 @@ MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */ + MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ >; }; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-27 13:18 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-27 13:17 [PATCH v4 0/8] arm64: dts: librem5-devkit: description updates Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 1/8] arm64: dts: librem5-devkit: add a vbus supply to usb0 Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 2/8] arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 3/8] arm64: dts: librem5-devkit: add the simcom 7100 modem and audio Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger [this message] 2020-02-27 13:17 ` [PATCH v4 4/8] arm64: dts: librem5-devkit: allow modem to wake the system from suspend Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 5/8] arm64: dts: librem5-devkit: add the regulators for DVFS Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 6/8] arm64: dts: librem5-devkit: allow the redpine card to be removed Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 7/8] arm64: dts: librem5-devkit: increase the VBUS current in the kernel Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 8/8] arm64: dts: librem5-devkit: add lsm9ds1 mount matrix Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-03-11 7:59 ` [PATCH v4 0/8] arm64: dts: librem5-devkit: description updates Shawn Guo 2020-03-11 7:59 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200227131733.4228-5-martin.kepplinger@puri.sm \ --to=martin.kepplinger@puri.sm \ --cc=Anson.Huang@nxp.com \ --cc=angus@akkea.ca \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=kernel@puri.sm \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.