* [PATCH v4 0/8] arm64: dts: librem5-devkit: description updates
@ 2020-02-27 13:17 ` Martin Kepplinger
0 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: linux-imx, Anson.Huang, devicetree, kernel, linux-arm-kernel,
linux-kernel, Martin Kepplinger
Shawn, I included Fabio's feedback despite you've taken the changes already.
I don't know how "far out there" they are already, but in case you want to
rebase / force-push this again, here is v4: It basically only adds one Fixes
tag.
These are additions to the imx8mq-librem5-devkit devicetree description
we are running for quite some time. All users should have them:
revision history
----------------
v4: review by Fabio: add Fixes tag and reorder a bit. thanks.
v3: review by Shawn: newline / hyphen issues; squashed related ones.
thanks a lot.
https://lore.kernel.org/linux-arm-kernel/20200224062917.4895-1-martin.kepplinger@puri.sm/
v2: review by Shawn and Guido: remove a battery description
add SoB tags, coding style fixes, squash and reorder audio
descritions, remove redundant and unneeded changes.
https://lore.kernel.org/linux-arm-kernel/20200218084942.4884-1-martin.kepplinger@puri.sm/
v1: https://lore.kernel.org/linux-arm-kernel/20200205143003.28408-1-martin.kepplinger@puri.sm/
Angus Ainslie (Purism) (7):
arm64: dts: librem5-devkit: add a vbus supply to usb0
arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec
arm64: dts: librem5-devkit: add the simcom 7100 modem and audio
arm64: dts: librem5-devkit: allow modem to wake the system from
suspend
arm64: dts: librem5-devkit: add the regulators for DVFS
arm64: dts: librem5-devkit: allow the redpine card to be removed
arm64: dts: librem5-devkit: increase the VBUS current in the kernel
Martin Kepplinger (1):
arm64: dts: librem5-devkit: add lsm9ds1 mount matrix
.../dts/freescale/imx8mq-librem5-devkit.dts | 136 +++++++++++++++++-
1 file changed, 133 insertions(+), 3 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 0/8] arm64: dts: librem5-devkit: description updates
@ 2020-02-27 13:17 ` Martin Kepplinger
0 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: devicetree, kernel, Anson.Huang, Martin Kepplinger, linux-kernel,
linux-imx, linux-arm-kernel
Shawn, I included Fabio's feedback despite you've taken the changes already.
I don't know how "far out there" they are already, but in case you want to
rebase / force-push this again, here is v4: It basically only adds one Fixes
tag.
These are additions to the imx8mq-librem5-devkit devicetree description
we are running for quite some time. All users should have them:
revision history
----------------
v4: review by Fabio: add Fixes tag and reorder a bit. thanks.
v3: review by Shawn: newline / hyphen issues; squashed related ones.
thanks a lot.
https://lore.kernel.org/linux-arm-kernel/20200224062917.4895-1-martin.kepplinger@puri.sm/
v2: review by Shawn and Guido: remove a battery description
add SoB tags, coding style fixes, squash and reorder audio
descritions, remove redundant and unneeded changes.
https://lore.kernel.org/linux-arm-kernel/20200218084942.4884-1-martin.kepplinger@puri.sm/
v1: https://lore.kernel.org/linux-arm-kernel/20200205143003.28408-1-martin.kepplinger@puri.sm/
Angus Ainslie (Purism) (7):
arm64: dts: librem5-devkit: add a vbus supply to usb0
arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec
arm64: dts: librem5-devkit: add the simcom 7100 modem and audio
arm64: dts: librem5-devkit: allow modem to wake the system from
suspend
arm64: dts: librem5-devkit: add the regulators for DVFS
arm64: dts: librem5-devkit: allow the redpine card to be removed
arm64: dts: librem5-devkit: increase the VBUS current in the kernel
Martin Kepplinger (1):
arm64: dts: librem5-devkit: add lsm9ds1 mount matrix
.../dts/freescale/imx8mq-librem5-devkit.dts | 136 +++++++++++++++++-
1 file changed, 133 insertions(+), 3 deletions(-)
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v4 1/8] arm64: dts: librem5-devkit: add a vbus supply to usb0
2020-02-27 13:17 ` Martin Kepplinger
@ 2020-02-27 13:17 ` Martin Kepplinger
-1 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: linux-imx, Anson.Huang, devicetree, kernel, linux-arm-kernel,
linux-kernel, Angus Ainslie (Purism),
Martin Kepplinger
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
Without a VBUS supply the dwc3 driver won't go into otg mode.
Fixes: eb4ea0857c83 ("arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit")
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 007c14eec676..bab039500f2b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -762,6 +762,7 @@
};
&usb3_phy0 {
+ vbus-supply = <®_5v_p>;
status = "okay";
};
--
2.20.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 1/8] arm64: dts: librem5-devkit: add a vbus supply to usb0
@ 2020-02-27 13:17 ` Martin Kepplinger
0 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: devicetree, kernel, Anson.Huang, Martin Kepplinger,
Angus Ainslie (Purism),
linux-kernel, linux-imx, linux-arm-kernel
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
Without a VBUS supply the dwc3 driver won't go into otg mode.
Fixes: eb4ea0857c83 ("arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit")
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 007c14eec676..bab039500f2b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -762,6 +762,7 @@
};
&usb3_phy0 {
+ vbus-supply = <®_5v_p>;
status = "okay";
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 2/8] arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec
2020-02-27 13:17 ` Martin Kepplinger
@ 2020-02-27 13:17 ` Martin Kepplinger
-1 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: linux-imx, Anson.Huang, devicetree, kernel, linux-arm-kernel,
linux-kernel, Angus Ainslie (Purism),
Martin Kepplinger
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
Describe the sgtl5000 of the librem 5 devkit in devicetree.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
.../dts/freescale/imx8mq-librem5-devkit.dts | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index bab039500f2b..c829e4579540 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -148,6 +148,34 @@
regulator-always-on;
};
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+
vibrator {
compatible = "gpio-vibrator";
pinctrl-names = "default";
@@ -426,6 +454,19 @@
vddio-supply = <®_3v3_p>;
};
+ sgtl5000: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ VDDD-supply = <®_1v8_p>;
+ VDDIO-supply = <®_3v3_p>;
+ VDDA-supply = <®_3v3_p>;
+ };
+
touchscreen@5d {
compatible = "goodix,gt5688";
reg = <0x5d>;
@@ -567,6 +608,16 @@
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
+ >;
+ };
+
pinctrl_typec: typecgrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16
@@ -742,6 +793,15 @@
status = "okay";
};
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&uart1 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
--
2.20.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 2/8] arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec
@ 2020-02-27 13:17 ` Martin Kepplinger
0 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: devicetree, kernel, Anson.Huang, Martin Kepplinger,
Angus Ainslie (Purism),
linux-kernel, linux-imx, linux-arm-kernel
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
Describe the sgtl5000 of the librem 5 devkit in devicetree.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
.../dts/freescale/imx8mq-librem5-devkit.dts | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index bab039500f2b..c829e4579540 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -148,6 +148,34 @@
regulator-always-on;
};
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+
vibrator {
compatible = "gpio-vibrator";
pinctrl-names = "default";
@@ -426,6 +454,19 @@
vddio-supply = <®_3v3_p>;
};
+ sgtl5000: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ VDDD-supply = <®_1v8_p>;
+ VDDIO-supply = <®_3v3_p>;
+ VDDA-supply = <®_3v3_p>;
+ };
+
touchscreen@5d {
compatible = "goodix,gt5688";
reg = <0x5d>;
@@ -567,6 +608,16 @@
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
+ >;
+ };
+
pinctrl_typec: typecgrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16
@@ -742,6 +793,15 @@
status = "okay";
};
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&uart1 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 3/8] arm64: dts: librem5-devkit: add the simcom 7100 modem and audio
2020-02-27 13:17 ` Martin Kepplinger
@ 2020-02-27 13:17 ` Martin Kepplinger
-1 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: linux-imx, Anson.Huang, devicetree, kernel, linux-arm-kernel,
linux-kernel, Angus Ainslie (Purism),
Martin Kepplinger
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
Add the simcom SIM7100 modem and the sai6 interface that connects it.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
.../dts/freescale/imx8mq-librem5-devkit.dts | 40 +++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index c829e4579540..84443e4857d5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -148,6 +148,11 @@
regulator-always-on;
};
+ wwan_codec: sound-wwan-codec {
+ compatible = "option,gtm601";
+ #sound-dai-cells = <0>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sgtl5000";
@@ -176,6 +181,22 @@
};
};
+ sound-wwan {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SIMCom SIM7100";
+ simple-audio-card,format = "dsp_a";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai6>;
+ };
+
+ telephony_link_master: simple-audio-card,codec {
+ sound-dai = <&wwan_codec>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+
vibrator {
compatible = "gpio-vibrator";
pinctrl-names = "default";
@@ -618,6 +639,15 @@
>;
};
+ pinctrl_sai6: sai6grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6
+ >;
+ };
+
pinctrl_typec: typecgrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16
@@ -802,6 +832,16 @@
status = "okay";
};
+&sai6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai6>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ fsl,sai-synchronous-rx;
+ status = "okay";
+};
+
&uart1 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
--
2.20.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 3/8] arm64: dts: librem5-devkit: add the simcom 7100 modem and audio
@ 2020-02-27 13:17 ` Martin Kepplinger
0 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: devicetree, kernel, Anson.Huang, Martin Kepplinger,
Angus Ainslie (Purism),
linux-kernel, linux-imx, linux-arm-kernel
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
Add the simcom SIM7100 modem and the sai6 interface that connects it.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
.../dts/freescale/imx8mq-librem5-devkit.dts | 40 +++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index c829e4579540..84443e4857d5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -148,6 +148,11 @@
regulator-always-on;
};
+ wwan_codec: sound-wwan-codec {
+ compatible = "option,gtm601";
+ #sound-dai-cells = <0>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sgtl5000";
@@ -176,6 +181,22 @@
};
};
+ sound-wwan {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SIMCom SIM7100";
+ simple-audio-card,format = "dsp_a";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai6>;
+ };
+
+ telephony_link_master: simple-audio-card,codec {
+ sound-dai = <&wwan_codec>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+
vibrator {
compatible = "gpio-vibrator";
pinctrl-names = "default";
@@ -618,6 +639,15 @@
>;
};
+ pinctrl_sai6: sai6grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6
+ >;
+ };
+
pinctrl_typec: typecgrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16
@@ -802,6 +832,16 @@
status = "okay";
};
+&sai6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai6>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ fsl,sai-synchronous-rx;
+ status = "okay";
+};
+
&uart1 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 4/8] arm64: dts: librem5-devkit: allow modem to wake the system from suspend
2020-02-27 13:17 ` Martin Kepplinger
@ 2020-02-27 13:17 ` Martin Kepplinger
-1 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: linux-imx, Anson.Huang, devicetree, kernel, linux-arm-kernel,
linux-kernel, Angus Ainslie (Purism),
Martin Kepplinger
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
Connect the WoWWAN signal to a gpio key to wake up the system from suspend.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
.../arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 84443e4857d5..823d5c60a8fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -55,6 +55,15 @@
wakeup-source;
linux,code = <KEY_HP>;
};
+
+ wwan-wake {
+ label = "WWAN_WAKE";
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ linux,code = <KEY_PHONE>;
+ };
};
leds {
@@ -576,6 +585,7 @@
MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16
MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16
MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */
+ MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */
>;
};
--
2.20.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 4/8] arm64: dts: librem5-devkit: allow modem to wake the system from suspend
@ 2020-02-27 13:17 ` Martin Kepplinger
0 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: devicetree, kernel, Anson.Huang, Martin Kepplinger,
Angus Ainslie (Purism),
linux-kernel, linux-imx, linux-arm-kernel
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
Connect the WoWWAN signal to a gpio key to wake up the system from suspend.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
.../arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 84443e4857d5..823d5c60a8fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -55,6 +55,15 @@
wakeup-source;
linux,code = <KEY_HP>;
};
+
+ wwan-wake {
+ label = "WWAN_WAKE";
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ linux,code = <KEY_PHONE>;
+ };
};
leds {
@@ -576,6 +585,7 @@
MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16
MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16
MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */
+ MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */
>;
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 5/8] arm64: dts: librem5-devkit: add the regulators for DVFS
2020-02-27 13:17 ` Martin Kepplinger
@ 2020-02-27 13:17 ` Martin Kepplinger
-1 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: linux-imx, Anson.Huang, devicetree, kernel, linux-arm-kernel,
linux-kernel, Angus Ainslie (Purism),
Martin Kepplinger
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
Specify which regulator is used for cpufreq DVFS.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
.../boot/dts/freescale/imx8mq-librem5-devkit.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 823d5c60a8fa..6ba65a807b25 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -227,6 +227,22 @@
};
};
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
&clk {
assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
assigned-clock-rates = <786432000>, <722534400>;
--
2.20.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 5/8] arm64: dts: librem5-devkit: add the regulators for DVFS
@ 2020-02-27 13:17 ` Martin Kepplinger
0 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: devicetree, kernel, Anson.Huang, Martin Kepplinger,
Angus Ainslie (Purism),
linux-kernel, linux-imx, linux-arm-kernel
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
Specify which regulator is used for cpufreq DVFS.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
.../boot/dts/freescale/imx8mq-librem5-devkit.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 823d5c60a8fa..6ba65a807b25 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -227,6 +227,22 @@
};
};
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
&clk {
assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
assigned-clock-rates = <786432000>, <722534400>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 6/8] arm64: dts: librem5-devkit: allow the redpine card to be removed
2020-02-27 13:17 ` Martin Kepplinger
@ 2020-02-27 13:17 ` Martin Kepplinger
-1 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: linux-imx, Anson.Huang, devicetree, kernel, linux-arm-kernel,
linux-kernel, Angus Ainslie (Purism),
Martin Kepplinger
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
By adding broken-cd to the usdhc2 stanza the Redpine card can be
detected when the HKS is turned off and on.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 6ba65a807b25..12a91d2d36db 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -947,7 +947,7 @@
bus-width = <4>;
vmmc-supply = <®_usdhc2_vmmc>;
power-supply = <&wifi_pwr_en>;
- non-removable;
+ broken-cd;
disable-wp;
cap-sdio-irq;
keep-power-in-suspend;
--
2.20.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 6/8] arm64: dts: librem5-devkit: allow the redpine card to be removed
@ 2020-02-27 13:17 ` Martin Kepplinger
0 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: devicetree, kernel, Anson.Huang, Martin Kepplinger,
Angus Ainslie (Purism),
linux-kernel, linux-imx, linux-arm-kernel
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
By adding broken-cd to the usdhc2 stanza the Redpine card can be
detected when the HKS is turned off and on.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 6ba65a807b25..12a91d2d36db 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -947,7 +947,7 @@
bus-width = <4>;
vmmc-supply = <®_usdhc2_vmmc>;
power-supply = <&wifi_pwr_en>;
- non-removable;
+ broken-cd;
disable-wp;
cap-sdio-irq;
keep-power-in-suspend;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 7/8] arm64: dts: librem5-devkit: increase the VBUS current in the kernel
2020-02-27 13:17 ` Martin Kepplinger
@ 2020-02-27 13:17 ` Martin Kepplinger
-1 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: linux-imx, Anson.Huang, devicetree, kernel, linux-arm-kernel,
linux-kernel, Angus Ainslie (Purism),
Martin Kepplinger
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
The poly fuses can handle 6V 4Amps so incease the kernel limts to 5V
3.5Amps.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 12a91d2d36db..72c622ffe6de 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -428,10 +428,10 @@
PDO_FIXED_USB_COMM |
PDO_FIXED_DUAL_ROLE |
PDO_FIXED_DATA_SWAP )>;
- sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM |
+ sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM |
PDO_FIXED_DUAL_ROLE |
PDO_FIXED_DATA_SWAP )
- PDO_VAR(5000, 3000, 3000)>;
+ PDO_VAR(5000, 5000, 3500)>;
op-sink-microwatt = <10000000>;
ports {
--
2.20.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 7/8] arm64: dts: librem5-devkit: increase the VBUS current in the kernel
@ 2020-02-27 13:17 ` Martin Kepplinger
0 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: devicetree, kernel, Anson.Huang, Martin Kepplinger,
Angus Ainslie (Purism),
linux-kernel, linux-imx, linux-arm-kernel
From: "Angus Ainslie (Purism)" <angus@akkea.ca>
The poly fuses can handle 6V 4Amps so incease the kernel limts to 5V
3.5Amps.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 12a91d2d36db..72c622ffe6de 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -428,10 +428,10 @@
PDO_FIXED_USB_COMM |
PDO_FIXED_DUAL_ROLE |
PDO_FIXED_DATA_SWAP )>;
- sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM |
+ sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM |
PDO_FIXED_DUAL_ROLE |
PDO_FIXED_DATA_SWAP )
- PDO_VAR(5000, 3000, 3000)>;
+ PDO_VAR(5000, 5000, 3500)>;
op-sink-microwatt = <10000000>;
ports {
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 8/8] arm64: dts: librem5-devkit: add lsm9ds1 mount matrix
2020-02-27 13:17 ` Martin Kepplinger
@ 2020-02-27 13:17 ` Martin Kepplinger
-1 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: linux-imx, Anson.Huang, devicetree, kernel, linux-arm-kernel,
linux-kernel, Martin Kepplinger, Marco Felsch
The IMU chip on the librem5-devkit is not mounted at the "natural" place
that would match normal phone orientation (see the documentation for the
details about what that is).
Since the lsm9ds1 driver supports providing a mount matrix, we can describe
the orientation on the board in the dts:
Create a right-handed coordinate system (x * -1; see the datasheet for the
axis) and rotate 180 degrees around the y axis because the device sits on
the back side from the display.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 72c622ffe6de..10eca94194be 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -539,6 +539,9 @@
reg = <0x6a>;
vdd-supply = <®_3v3_p>;
vddio-supply = <®_3v3_p>;
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
};
};
--
2.20.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v4 8/8] arm64: dts: librem5-devkit: add lsm9ds1 mount matrix
@ 2020-02-27 13:17 ` Martin Kepplinger
0 siblings, 0 replies; 20+ messages in thread
From: Martin Kepplinger @ 2020-02-27 13:17 UTC (permalink / raw)
To: robh, mark.rutland, shawnguo, s.hauer, kernel, festevam
Cc: devicetree, kernel, Anson.Huang, Martin Kepplinger, linux-kernel,
Marco Felsch, linux-imx, linux-arm-kernel
The IMU chip on the librem5-devkit is not mounted at the "natural" place
that would match normal phone orientation (see the documentation for the
details about what that is).
Since the lsm9ds1 driver supports providing a mount matrix, we can describe
the orientation on the board in the dts:
Create a right-handed coordinate system (x * -1; see the datasheet for the
axis) and rotate 180 degrees around the y axis because the device sits on
the back side from the display.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 72c622ffe6de..10eca94194be 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -539,6 +539,9 @@
reg = <0x6a>;
vdd-supply = <®_3v3_p>;
vddio-supply = <®_3v3_p>;
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
};
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH v4 0/8] arm64: dts: librem5-devkit: description updates
2020-02-27 13:17 ` Martin Kepplinger
@ 2020-03-11 7:59 ` Shawn Guo
-1 siblings, 0 replies; 20+ messages in thread
From: Shawn Guo @ 2020-03-11 7:59 UTC (permalink / raw)
To: Martin Kepplinger
Cc: robh, mark.rutland, s.hauer, kernel, festevam, linux-imx,
Anson.Huang, devicetree, kernel, linux-arm-kernel, linux-kernel
On Thu, Feb 27, 2020 at 02:17:25PM +0100, Martin Kepplinger wrote:
>
> Shawn, I included Fabio's feedback despite you've taken the changes already.
> I don't know how "far out there" they are already, but in case you want to
> rebase / force-push this again, here is v4: It basically only adds one Fixes
> tag.
>
>
> These are additions to the imx8mq-librem5-devkit devicetree description
> we are running for quite some time. All users should have them:
>
> revision history
> ----------------
> v4: review by Fabio: add Fixes tag and reorder a bit. thanks.
> v3: review by Shawn: newline / hyphen issues; squashed related ones.
> thanks a lot.
> https://lore.kernel.org/linux-arm-kernel/20200224062917.4895-1-martin.kepplinger@puri.sm/
> v2: review by Shawn and Guido: remove a battery description
> add SoB tags, coding style fixes, squash and reorder audio
> descritions, remove redundant and unneeded changes.
> https://lore.kernel.org/linux-arm-kernel/20200218084942.4884-1-martin.kepplinger@puri.sm/
> v1: https://lore.kernel.org/linux-arm-kernel/20200205143003.28408-1-martin.kepplinger@puri.sm/
>
>
> Angus Ainslie (Purism) (7):
> arm64: dts: librem5-devkit: add a vbus supply to usb0
> arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec
> arm64: dts: librem5-devkit: add the simcom 7100 modem and audio
> arm64: dts: librem5-devkit: allow modem to wake the system from
> suspend
> arm64: dts: librem5-devkit: add the regulators for DVFS
> arm64: dts: librem5-devkit: allow the redpine card to be removed
> arm64: dts: librem5-devkit: increase the VBUS current in the kernel
Replace v3 with this version, thanks.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v4 0/8] arm64: dts: librem5-devkit: description updates
@ 2020-03-11 7:59 ` Shawn Guo
0 siblings, 0 replies; 20+ messages in thread
From: Shawn Guo @ 2020-03-11 7:59 UTC (permalink / raw)
To: Martin Kepplinger
Cc: mark.rutland, robh, kernel, Anson.Huang, devicetree, s.hauer,
linux-kernel, linux-imx, kernel, festevam, linux-arm-kernel
On Thu, Feb 27, 2020 at 02:17:25PM +0100, Martin Kepplinger wrote:
>
> Shawn, I included Fabio's feedback despite you've taken the changes already.
> I don't know how "far out there" they are already, but in case you want to
> rebase / force-push this again, here is v4: It basically only adds one Fixes
> tag.
>
>
> These are additions to the imx8mq-librem5-devkit devicetree description
> we are running for quite some time. All users should have them:
>
> revision history
> ----------------
> v4: review by Fabio: add Fixes tag and reorder a bit. thanks.
> v3: review by Shawn: newline / hyphen issues; squashed related ones.
> thanks a lot.
> https://lore.kernel.org/linux-arm-kernel/20200224062917.4895-1-martin.kepplinger@puri.sm/
> v2: review by Shawn and Guido: remove a battery description
> add SoB tags, coding style fixes, squash and reorder audio
> descritions, remove redundant and unneeded changes.
> https://lore.kernel.org/linux-arm-kernel/20200218084942.4884-1-martin.kepplinger@puri.sm/
> v1: https://lore.kernel.org/linux-arm-kernel/20200205143003.28408-1-martin.kepplinger@puri.sm/
>
>
> Angus Ainslie (Purism) (7):
> arm64: dts: librem5-devkit: add a vbus supply to usb0
> arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec
> arm64: dts: librem5-devkit: add the simcom 7100 modem and audio
> arm64: dts: librem5-devkit: allow modem to wake the system from
> suspend
> arm64: dts: librem5-devkit: add the regulators for DVFS
> arm64: dts: librem5-devkit: allow the redpine card to be removed
> arm64: dts: librem5-devkit: increase the VBUS current in the kernel
Replace v3 with this version, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2020-03-11 8:00 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-27 13:17 [PATCH v4 0/8] arm64: dts: librem5-devkit: description updates Martin Kepplinger
2020-02-27 13:17 ` Martin Kepplinger
2020-02-27 13:17 ` [PATCH v4 1/8] arm64: dts: librem5-devkit: add a vbus supply to usb0 Martin Kepplinger
2020-02-27 13:17 ` Martin Kepplinger
2020-02-27 13:17 ` [PATCH v4 2/8] arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec Martin Kepplinger
2020-02-27 13:17 ` Martin Kepplinger
2020-02-27 13:17 ` [PATCH v4 3/8] arm64: dts: librem5-devkit: add the simcom 7100 modem and audio Martin Kepplinger
2020-02-27 13:17 ` Martin Kepplinger
2020-02-27 13:17 ` [PATCH v4 4/8] arm64: dts: librem5-devkit: allow modem to wake the system from suspend Martin Kepplinger
2020-02-27 13:17 ` Martin Kepplinger
2020-02-27 13:17 ` [PATCH v4 5/8] arm64: dts: librem5-devkit: add the regulators for DVFS Martin Kepplinger
2020-02-27 13:17 ` Martin Kepplinger
2020-02-27 13:17 ` [PATCH v4 6/8] arm64: dts: librem5-devkit: allow the redpine card to be removed Martin Kepplinger
2020-02-27 13:17 ` Martin Kepplinger
2020-02-27 13:17 ` [PATCH v4 7/8] arm64: dts: librem5-devkit: increase the VBUS current in the kernel Martin Kepplinger
2020-02-27 13:17 ` Martin Kepplinger
2020-02-27 13:17 ` [PATCH v4 8/8] arm64: dts: librem5-devkit: add lsm9ds1 mount matrix Martin Kepplinger
2020-02-27 13:17 ` Martin Kepplinger
2020-03-11 7:59 ` [PATCH v4 0/8] arm64: dts: librem5-devkit: description updates Shawn Guo
2020-03-11 7:59 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.