From: Antoine Tenart <antoine.tenart@bootlin.com>
To: davem@davemloft.net, andrew@lunn.ch, f.fainelli@gmail.com,
hkallweit1@gmail.com
Cc: Antoine Tenart <antoine.tenart@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
foss@0leil.net
Subject: [PATCH net-next v2 1/3] net: phy: mscc: add support for RGMII MAC mode
Date: Fri, 28 Feb 2020 16:57:00 +0100 [thread overview]
Message-ID: <20200228155702.2062570-2-antoine.tenart@bootlin.com> (raw)
In-Reply-To: <20200228155702.2062570-1-antoine.tenart@bootlin.com>
This patch adds support for connecting VSC8584 PHYs to the MAC using
RGMII.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
drivers/net/phy/mscc.c | 33 +++++++++++++++++++++------------
1 file changed, 21 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index d24577de0775..c389d7e59f91 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -272,6 +272,7 @@ enum macsec_bank {
#define MAC_CFG_MASK 0xc000
#define MAC_CFG_SGMII 0x0000
#define MAC_CFG_QSGMII 0x4000
+#define MAC_CFG_RGMII 0x8000
/* Test page Registers */
#define MSCC_PHY_TEST_PAGE_5 5
@@ -2751,27 +2752,35 @@ static int vsc8584_config_init(struct phy_device *phydev)
val = phy_base_read(phydev, MSCC_PHY_MAC_CFG_FASTLINK);
val &= ~MAC_CFG_MASK;
- if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
+ if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
val |= MAC_CFG_QSGMII;
- else
+ } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
val |= MAC_CFG_SGMII;
+ } else if (phy_interface_is_rgmii(phydev)) {
+ val |= MAC_CFG_RGMII;
+ } else {
+ ret = -EINVAL;
+ goto err;
+ }
ret = phy_base_write(phydev, MSCC_PHY_MAC_CFG_FASTLINK, val);
if (ret)
goto err;
- val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT |
- PROC_CMD_READ_MOD_WRITE_PORT;
- if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
- val |= PROC_CMD_QSGMII_MAC;
- else
- val |= PROC_CMD_SGMII_MAC;
+ if (!phy_interface_is_rgmii(phydev)) {
+ val = PROC_CMD_MCB_ACCESS_MAC_CONF | PROC_CMD_RST_CONF_PORT |
+ PROC_CMD_READ_MOD_WRITE_PORT;
+ if (phydev->interface == PHY_INTERFACE_MODE_QSGMII)
+ val |= PROC_CMD_QSGMII_MAC;
+ else
+ val |= PROC_CMD_SGMII_MAC;
- ret = vsc8584_cmd(phydev, val);
- if (ret)
- goto err;
+ ret = vsc8584_cmd(phydev, val);
+ if (ret)
+ goto err;
- usleep_range(10000, 20000);
+ usleep_range(10000, 20000);
+ }
/* Disable SerDes for 100Base-FX */
ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF |
--
2.24.1
next prev parent reply other threads:[~2020-02-28 15:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-28 15:56 [PATCH net-next v2 0/3] net: phy: mscc: add support for RGMII MAC mode Antoine Tenart
2020-02-28 15:57 ` Antoine Tenart [this message]
2020-02-28 16:14 ` [PATCH net-next v2 1/3] " Andrew Lunn
2020-02-28 15:57 ` [PATCH net-next v2 2/3] dt-bindings: net: phy: mscc: document rgmii skew properties Antoine Tenart
2020-02-28 15:57 ` [PATCH net-next v2 3/3] net: phy: mscc: RGMII skew delay configuration Antoine Tenart
2020-02-28 16:29 ` Andrew Lunn
2020-02-28 16:48 ` Antoine Tenart
2020-02-28 17:26 ` Andrew Lunn
2020-02-28 21:15 ` Antoine Tenart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200228155702.2062570-2-antoine.tenart@bootlin.com \
--to=antoine.tenart@bootlin.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=foss@0leil.net \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.