All of lore.kernel.org
 help / color / mirror / Atom feed
From: Janosch Frank <frankja@linux.ibm.com>
To: qemu-devel@nongnu.org
Cc: borntraeger@de.ibm.com, qemu-s390x@nongnu.org, cohuck@redhat.com,
	david@redhat.com
Subject: [PATCH v6 00/18] s390x: Protected Virtualization support
Date: Wed,  4 Mar 2020 06:42:13 -0500	[thread overview]
Message-ID: <20200304114231.23493-1-frankja@linux.ibm.com> (raw)

Most of the QEMU changes for PV are related to the new IPL type with
subcodes 8 - 10 and the execution of the necessary Ultravisor calls to
IPL secure guests. Note that we can only boot into secure mode from
normal mode, i.e. stfle 161 is not active in secure mode.

The other changes related to data gathering for emulation and
disabling addressing checks in secure mode, as well as CPU resets.

v6:
	* diag308 rc numbers were changed by architecture
	* IPL pv block received one more reserved field by architecture
	* Officially added the bios patch to the series
	* Dropped picked constant rename patch

v5:
	* Moved docs into docs/system
	* Some more enable/disable changes
	* Moved enablement/disablement of pv in separate functions
	* Some review fixes

v4:
	* Sync with KVM changes
	* Review changes

V3:
	* Use dedicated functions to access SIDA
	* Smaller cleanups and segfault fixes
	* Error reporting for Ultravisor calls
	* Inject of RC of diag308 subcode 10 fails

V2:
	* Split out cleanups
	* Internal PV state tracking
	* Review feedback

Christian Borntraeger (1):
  s390x: Add unpack facility feature to GA1

Janosch Frank (17):
  Sync pv
  s390x: protvirt: Add diag308 subcodes 8 - 10
  s390x: protvirt: Support unpack facility
  s390x: protvirt: Add migration blocker
  s390x: protvirt: Handle diag 308 subcodes 0,1,3,4
  s390x: protvirt: Inhibit balloon when switching to protected mode
  s390x: protvirt: KVM intercept changes
  s390x: Add SIDA memory ops
  s390x: protvirt: Move STSI data over SIDAD
  s390x: protvirt: SCLP interpretation
  s390x: protvirt: Set guest IPL PSW
  s390x: protvirt: Move diag 308 data over SIDAD
  s390x: protvirt: Disable address checks for PV guest IO emulation
  s390x: protvirt: Move IO control structures over SIDA
  s390x: protvirt: Handle SIGP store status correctly
  docs: Add protvirt docs
  pc-bios: s390x: Save iplb location in lowcore

 docs/system/index.rst               |   1 +
 docs/system/protvirt.rst            |  57 +++++++++++
 hw/s390x/Makefile.objs              |   1 +
 hw/s390x/ipl.c                      |  80 ++++++++++++++-
 hw/s390x/ipl.h                      |  34 +++++++
 hw/s390x/pv.c                       | 106 ++++++++++++++++++++
 hw/s390x/pv.h                       |  34 +++++++
 hw/s390x/s390-virtio-ccw.c          | 145 +++++++++++++++++++++++++++-
 hw/s390x/sclp.c                     |  17 ++++
 include/hw/s390x/s390-virtio-ccw.h  |   1 +
 include/hw/s390x/sclp.h             |   2 +
 linux-headers/linux/kvm.h           |  45 ++++++++-
 pc-bios/s390-ccw/jump2ipl.c         |   1 +
 pc-bios/s390-ccw/main.c             |   8 +-
 pc-bios/s390-ccw/netmain.c          |   1 +
 pc-bios/s390-ccw/s390-arch.h        |  10 +-
 pc-bios/s390-ccw/s390-ccw.h         |   1 +
 target/s390x/cpu.c                  |  27 ++++--
 target/s390x/cpu.h                  |   8 +-
 target/s390x/cpu_features_def.inc.h |   1 +
 target/s390x/diag.c                 |  60 ++++++++++--
 target/s390x/gen-features.c         |   1 +
 target/s390x/helper.c               |   4 +
 target/s390x/ioinst.c               | 113 +++++++++++++++-------
 target/s390x/kvm.c                  |  54 ++++++++++-
 target/s390x/kvm_s390x.h            |   2 +
 target/s390x/mmu_helper.c           |  14 +++
 target/s390x/sigp.c                 |   1 +
 28 files changed, 762 insertions(+), 67 deletions(-)
 create mode 100644 docs/system/protvirt.rst
 create mode 100644 hw/s390x/pv.c
 create mode 100644 hw/s390x/pv.h

-- 
2.20.1



             reply	other threads:[~2020-03-04 11:44 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-04 11:42 Janosch Frank [this message]
2020-03-04 11:42 ` [PATCH v6 01/18] Sync pv Janosch Frank
2020-03-04 11:42 ` [PATCH v6 02/18] s390x: protvirt: Add diag308 subcodes 8 - 10 Janosch Frank
2020-03-04 17:04   ` David Hildenbrand
2020-03-05 12:04     ` Janosch Frank
2020-03-05 12:24       ` Janosch Frank
2020-03-05 12:30         ` David Hildenbrand
2020-03-04 17:04   ` David Hildenbrand
2020-03-04 17:06   ` David Hildenbrand
2020-03-06  9:59     ` Janosch Frank
2020-03-04 18:59   ` Christian Borntraeger
2020-03-05 14:39     ` Janosch Frank
2020-03-04 11:42 ` [PATCH v6 03/18] s390x: protvirt: Support unpack facility Janosch Frank
2020-03-05 13:51   ` David Hildenbrand
2020-03-05 14:10     ` Janosch Frank
2020-03-05 14:15       ` David Hildenbrand
2020-03-05 14:20         ` Janosch Frank
2020-03-05 14:23           ` David Hildenbrand
2020-03-05 14:24             ` Janosch Frank
2020-03-05 13:52   ` David Hildenbrand
2020-03-05 14:15     ` Janosch Frank
2020-03-06 11:48   ` Christian Borntraeger
2020-03-06 13:36     ` Janosch Frank
2020-03-04 11:42 ` [PATCH v6 04/18] s390x: protvirt: Add migration blocker Janosch Frank
2020-03-04 17:13   ` David Hildenbrand
2020-03-05  9:16     ` Janosch Frank
2020-03-05  9:30       ` David Hildenbrand
2020-03-04 11:42 ` [PATCH v6 05/18] s390x: protvirt: Handle diag 308 subcodes 0,1,3,4 Janosch Frank
2020-03-04 11:42 ` [PATCH v6 06/18] s390x: protvirt: Inhibit balloon when switching to protected mode Janosch Frank
2020-03-05 12:00   ` Christian Borntraeger
2020-03-04 11:42 ` [PATCH v6 07/18] s390x: protvirt: KVM intercept changes Janosch Frank
2020-03-04 11:42 ` [PATCH v6 08/18] s390x: Add SIDA memory ops Janosch Frank
2020-03-04 17:39   ` David Hildenbrand
2020-03-05  9:23     ` Janosch Frank
2020-03-04 11:42 ` [PATCH v6 09/18] s390x: protvirt: Move STSI data over SIDAD Janosch Frank
2020-03-04 17:43   ` David Hildenbrand
2020-03-05  9:27     ` Janosch Frank
2020-03-04 11:42 ` [PATCH v6 10/18] s390x: protvirt: SCLP interpretation Janosch Frank
2020-03-04 17:48   ` David Hildenbrand
2020-03-05  9:34     ` Janosch Frank
2020-03-05 10:09       ` David Hildenbrand
2020-03-04 11:42 ` [PATCH v6 11/18] s390x: protvirt: Set guest IPL PSW Janosch Frank
2020-03-04 17:51   ` David Hildenbrand
2020-03-04 11:42 ` [PATCH v6 12/18] s390x: protvirt: Move diag 308 data over SIDAD Janosch Frank
2020-03-04 17:54   ` David Hildenbrand
2020-03-04 11:42 ` [PATCH v6 13/18] s390x: protvirt: Disable address checks for PV guest IO emulation Janosch Frank
2020-03-04 17:55   ` David Hildenbrand
2020-03-05  9:42     ` Janosch Frank
2020-03-05 10:00       ` David Hildenbrand
2020-03-05 11:26         ` Janosch Frank
2020-03-05 11:37           ` David Hildenbrand
2020-03-04 11:42 ` [PATCH v6 14/18] s390x: protvirt: Move IO control structures over SIDA Janosch Frank
2020-03-04 18:56   ` David Hildenbrand
2020-03-05  9:55     ` Janosch Frank
2020-03-05 10:01       ` David Hildenbrand
2020-03-04 11:42 ` [PATCH v6 15/18] s390x: protvirt: Handle SIGP store status correctly Janosch Frank
2020-03-04 18:41   ` David Hildenbrand
2020-03-05  9:59     ` Janosch Frank
2020-03-04 11:42 ` [PATCH v6 16/18] s390x: Add unpack facility feature to GA1 Janosch Frank
2020-03-04 18:42   ` David Hildenbrand
2020-03-06 10:14   ` Janosch Frank
2020-03-06 10:22     ` David Hildenbrand
2020-03-04 11:42 ` [PATCH v6 17/18] docs: Add protvirt docs Janosch Frank
2020-03-04 19:09   ` David Hildenbrand
2020-03-09  9:51     ` Janosch Frank
2020-03-04 11:42 ` [PATCH v6 18/18] pc-bios: s390x: Save iplb location in lowcore Janosch Frank
2020-03-04 12:40   ` David Hildenbrand
2020-03-04 13:25   ` Christian Borntraeger
2020-03-04 13:37     ` David Hildenbrand
2020-03-05 17:04   ` Christian Borntraeger
2020-03-04 17:15 ` [PATCH v6 00/18] s390x: Protected Virtualization support David Hildenbrand
2020-03-04 17:45   ` Christian Borntraeger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200304114231.23493-1-frankja@linux.ibm.com \
    --to=frankja@linux.ibm.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.