All of lore.kernel.org
 help / color / mirror / Atom feed
From: Samuel Holland <samuel@sholland.org>
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Jerome Brunet <jbrunet@baylibre.com>
Cc: Ondrej Jirman <megous@megous.com>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	linux-doc@vger.kernel.org, Samuel Holland <samuel@sholland.org>
Subject: [PATCH v4 3/3] ASoC: simple-card: Add support for codec2codec DAI links
Date: Wed,  4 Mar 2020 23:11:43 -0600	[thread overview]
Message-ID: <20200305051143.60691-4-samuel@sholland.org> (raw)
In-Reply-To: <20200305051143.60691-1-samuel@sholland.org>

Following the example in cb2cf0de1174 ("ASoC: soc-core: care Codec <->
Codec case by non_legacy_dai_naming"), determine if a DAI link contains
only codec DAIs by examining the non_legacy_dai_naming flag in each
DAI's component.

For now, we assume there is only one or a small set of valid PCM stream
parameters, so num_params == 1 is good enough. We also assume that the
same params are valid for all supported streams. params is set to the
subset of parameters common among all DAIs, and then the existing code
automatically chooses the highest quality of the remaining values when
the link is brought up.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 Documentation/sound/soc/codec-to-codec.rst |  9 +++-
 sound/soc/generic/simple-card-utils.c      | 48 ++++++++++++++++++++++
 2 files changed, 55 insertions(+), 2 deletions(-)

diff --git a/Documentation/sound/soc/codec-to-codec.rst b/Documentation/sound/soc/codec-to-codec.rst
index 810109d7500d..4eaa9a0c41fc 100644
--- a/Documentation/sound/soc/codec-to-codec.rst
+++ b/Documentation/sound/soc/codec-to-codec.rst
@@ -104,5 +104,10 @@ Make sure to name your corresponding cpu and codec playback and capture
 dai names ending with "Playback" and "Capture" respectively as dapm core
 will link and power those dais based on the name.
 
-Note that in current device tree there is no way to mark a dai_link
-as codec to codec. However, it may change in future.
+A dai_link in a "simple-audio-card" will automatically be detected as
+codec to codec when all DAIs on the link belong to codec components.
+The dai_link will be initialized with the subset of stream parameters
+(channels, format, sample rate) supported by all DAIs on the link. Since
+there is no way to provide these parameters in the device tree, this is
+mostly useful for communication with simple fixed-function codecs, such
+as a Bluetooth controller or cellular modem.
diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 9b794775df53..320e648f7499 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -331,6 +331,50 @@ static int asoc_simple_init_dai(struct snd_soc_dai *dai,
 	return 0;
 }
 
+static int asoc_simple_init_dai_link_params(struct snd_soc_pcm_runtime *rtd,
+					    struct simple_dai_props *dai_props)
+{
+	struct snd_soc_dai_link *dai_link = rtd->dai_link;
+	struct snd_soc_component *component;
+	struct snd_soc_pcm_stream *params;
+	struct snd_pcm_hardware hw;
+	int i, ret, stream;
+
+	/* Only codecs should have non_legacy_dai_naming set. */
+	for_each_rtd_components(rtd, i, component) {
+		if (!component->driver->non_legacy_dai_naming)
+			return 0;
+	}
+
+	/* Assumes the capabilities are the same for all supported streams */
+	for (stream = 0; stream < 2; stream++) {
+		ret = snd_soc_runtime_calc_hw(rtd, &hw, stream);
+		if (ret == 0)
+			break;
+	}
+
+	if (ret < 0) {
+		dev_err(rtd->dev, "simple-card: no valid dai_link params\n");
+		return ret;
+	}
+
+	params = devm_kzalloc(rtd->dev, sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	params->formats = hw.formats;
+	params->rates = hw.rates;
+	params->rate_min = hw.rate_min;
+	params->rate_max = hw.rate_max;
+	params->channels_min = hw.channels_min;
+	params->channels_max = hw.channels_max;
+
+	dai_link->params = params;
+	dai_link->num_params = 1;
+
+	return 0;
+}
+
 int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card);
@@ -347,6 +391,10 @@ int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
 	if (ret < 0)
 		return ret;
 
+	ret = asoc_simple_init_dai_link_params(rtd, dai_props);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(asoc_simple_dai_init);
-- 
2.24.1


WARNING: multiple messages have this Message-ID
From: Samuel Holland <samuel@sholland.org>
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Jerome Brunet <jbrunet@baylibre.com>
Cc: Ondrej Jirman <megous@megous.com>,
	alsa-devel@alsa-project.org, Samuel Holland <samuel@sholland.org>,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org
Subject: [PATCH v4 3/3] ASoC: simple-card: Add support for codec2codec DAI links
Date: Wed,  4 Mar 2020 23:11:43 -0600	[thread overview]
Message-ID: <20200305051143.60691-4-samuel@sholland.org> (raw)
In-Reply-To: <20200305051143.60691-1-samuel@sholland.org>

Following the example in cb2cf0de1174 ("ASoC: soc-core: care Codec <->
Codec case by non_legacy_dai_naming"), determine if a DAI link contains
only codec DAIs by examining the non_legacy_dai_naming flag in each
DAI's component.

For now, we assume there is only one or a small set of valid PCM stream
parameters, so num_params == 1 is good enough. We also assume that the
same params are valid for all supported streams. params is set to the
subset of parameters common among all DAIs, and then the existing code
automatically chooses the highest quality of the remaining values when
the link is brought up.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 Documentation/sound/soc/codec-to-codec.rst |  9 +++-
 sound/soc/generic/simple-card-utils.c      | 48 ++++++++++++++++++++++
 2 files changed, 55 insertions(+), 2 deletions(-)

diff --git a/Documentation/sound/soc/codec-to-codec.rst b/Documentation/sound/soc/codec-to-codec.rst
index 810109d7500d..4eaa9a0c41fc 100644
--- a/Documentation/sound/soc/codec-to-codec.rst
+++ b/Documentation/sound/soc/codec-to-codec.rst
@@ -104,5 +104,10 @@ Make sure to name your corresponding cpu and codec playback and capture
 dai names ending with "Playback" and "Capture" respectively as dapm core
 will link and power those dais based on the name.
 
-Note that in current device tree there is no way to mark a dai_link
-as codec to codec. However, it may change in future.
+A dai_link in a "simple-audio-card" will automatically be detected as
+codec to codec when all DAIs on the link belong to codec components.
+The dai_link will be initialized with the subset of stream parameters
+(channels, format, sample rate) supported by all DAIs on the link. Since
+there is no way to provide these parameters in the device tree, this is
+mostly useful for communication with simple fixed-function codecs, such
+as a Bluetooth controller or cellular modem.
diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 9b794775df53..320e648f7499 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -331,6 +331,50 @@ static int asoc_simple_init_dai(struct snd_soc_dai *dai,
 	return 0;
 }
 
+static int asoc_simple_init_dai_link_params(struct snd_soc_pcm_runtime *rtd,
+					    struct simple_dai_props *dai_props)
+{
+	struct snd_soc_dai_link *dai_link = rtd->dai_link;
+	struct snd_soc_component *component;
+	struct snd_soc_pcm_stream *params;
+	struct snd_pcm_hardware hw;
+	int i, ret, stream;
+
+	/* Only codecs should have non_legacy_dai_naming set. */
+	for_each_rtd_components(rtd, i, component) {
+		if (!component->driver->non_legacy_dai_naming)
+			return 0;
+	}
+
+	/* Assumes the capabilities are the same for all supported streams */
+	for (stream = 0; stream < 2; stream++) {
+		ret = snd_soc_runtime_calc_hw(rtd, &hw, stream);
+		if (ret == 0)
+			break;
+	}
+
+	if (ret < 0) {
+		dev_err(rtd->dev, "simple-card: no valid dai_link params\n");
+		return ret;
+	}
+
+	params = devm_kzalloc(rtd->dev, sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	params->formats = hw.formats;
+	params->rates = hw.rates;
+	params->rate_min = hw.rate_min;
+	params->rate_max = hw.rate_max;
+	params->channels_min = hw.channels_min;
+	params->channels_max = hw.channels_max;
+
+	dai_link->params = params;
+	dai_link->num_params = 1;
+
+	return 0;
+}
+
 int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card);
@@ -347,6 +391,10 @@ int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
 	if (ret < 0)
 		return ret;
 
+	ret = asoc_simple_init_dai_link_params(rtd, dai_props);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(asoc_simple_dai_init);
-- 
2.24.1


  parent reply	other threads:[~2020-03-05  5:11 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-05  5:11 [PATCH v4 0/3] simple-audio-card codec2codec support Samuel Holland
2020-03-05  5:11 ` Samuel Holland
2020-03-05  5:11 ` [PATCH v4 1/3] ALSA: pcm: Add a standalone version of snd_pcm_limit_hw_rates Samuel Holland
2020-03-05  5:11   ` Samuel Holland
2020-03-05 14:53   ` Takashi Iwai
2020-03-05 14:53     ` Takashi Iwai
2020-03-05  5:11 ` [PATCH v4 2/3] ASoC: pcm: Export parameter intersection logic Samuel Holland
2020-03-05  5:11   ` Samuel Holland
2020-03-05  5:11 ` Samuel Holland [this message]
2020-03-05  5:11   ` [PATCH v4 3/3] ASoC: simple-card: Add support for codec2codec DAI links Samuel Holland
2020-03-06 15:03   ` Applied "ASoC: simple-card: Add support for codec2codec DAI links" to the asoc tree Mark Brown
2020-03-06 15:03     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200305051143.60691-4-samuel@sholland.org \
    --to=samuel@sholland.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=corbet@lwn.net \
    --cc=jbrunet@baylibre.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=megous@megous.com \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --subject='Re: [PATCH v4 3/3] ASoC: simple-card: Add support for codec2codec DAI links' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.