All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alim Akhtar <alim.akhtar@samsung.com>
To: robh+dt@kernel.org, devicetree@vger.kernel.org,
	linux-scsi@vger.kernel.org
Cc: krzk@kernel.org, avri.altman@wdc.com, martin.petersen@oracle.com,
	kwmad.kim@samsung.com, stanley.chu@mediatek.com,
	cang@codeaurora.org, Alim Akhtar <alim.akhtar@samsung.com>
Subject: [PATCH 5/5] arm64: dts: Add node for ufs exynos7
Date: Fri,  6 Mar 2020 20:35:29 +0530	[thread overview]
Message-ID: <20200306150529.3370-6-alim.akhtar@samsung.com> (raw)
In-Reply-To: <20200306150529.3370-1-alim.akhtar@samsung.com>

Adding dt node foe UFS and UFS-PHY for exynos7 SoC.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 .../boot/dts/exynos/exynos7-espresso.dts      | 16 ++++++
 arch/arm64/boot/dts/exynos/exynos7.dtsi       | 56 ++++++++++++++++++-
 2 files changed, 70 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 7af288fa9475..dee5a3ae7de3 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -410,3 +410,19 @@
 	vbus-supply = <&usb30_vbus_reg>;
 	vbus-boost-supply = <&usb3drd_boost_5v>;
 };
+
+&ufs {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+	ufs,pwr-attr-mode = "FAST";
+	ufs,pwr-attr-lane = <2>;
+	ufs,pwr-attr-gear = <2>;
+	ufs,pwr-attr-hs-series = "HS_rate_b";
+	ufs-rx-adv-fine-gran-sup_en = <1>;
+	ufs-rx-adv-fine-gran-step = <3>;
+	ufs-rx-adv-min-activate-time-cap = <9>;
+	ufs-pa-granularity = <6>;
+	ufs-pa-tacctivate = <3>;
+	ufs-pa-hibern8time = <20>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 5558045637ac..3edf63d18873 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -220,9 +220,14 @@
 			#clock-cells = <1>;
 			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
 				 <&clock_top1 DOUT_SCLK_MMC0>,
-				 <&clock_top1 DOUT_SCLK_MMC1>;
+				 <&clock_top1 DOUT_SCLK_MMC1>,
+				 <&clock_top1 DOUT_SCLK_UFSUNIPRO20>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>;
 			clock-names = "fin_pll", "dout_aclk_fsys1_200",
-				      "dout_sclk_mmc0", "dout_sclk_mmc1";
+				      "dout_sclk_mmc0", "dout_sclk_mmc1",
+				      "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1",
+				      "dout_sclk_phy_fsys1_26m";
 		};
 
 		serial_0: serial@13630000 {
@@ -634,6 +639,53 @@
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
+
+		ufs: ufs@15570000 {
+			compatible ="samsung,exynos7-ufs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg =
+				<0x15570000 0x100>,  /* 0: HCI standard */
+				<0x15570100 0x100>,  /* 1: Vendor specificed */
+				<0x15571000 0x200>,  /* 2: UNIPRO */
+				<0x15572000 0x300>;  /* 3: UFS protector */
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =
+				/* core clock */
+				<&clock_fsys1 ACLK_UFS20_LINK>,
+				/* unipro clocks */
+				<&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+			clock-names =
+				/* core clocks */
+				"core_clk",
+				/* unipro clocks */
+				"sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pclk-freq-avail-range = <70000000 133000000>;
+			ufs,pwr-local-l2-timer = <8000 28000 20000>;
+			ufs,pwr-remote-l2-timer = <12000 32000 16000>;
+			phys = <&ufs_phy>;
+			phy-names = "ufs-phy";
+			status = "disabled";
+		};
+
+		ufs_phy: ufs-phy@0x15571800 {
+			compatible = "samsung,exynos7-ufs-phy";
+			reg = <0x15571800 0x240>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks =
+				/* refclk clocks */
+				<&clock_fsys1 MOUT_FSYS1_PHYCLK_SEL1>,
+				<&clock_top1 CLK_SCLK_PHY_FSYS1_26M>;
+			clock-names =
+				/* refclk clocks */
+				"ref_clk_parent",
+				"ref_clk";
+		};
 	};
 
 	timer {
-- 
2.17.1


  parent reply	other threads:[~2020-03-06 15:10 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20200306151019epcas5p11f5fcf849ece9a808396d9aa3a65410d@epcas5p1.samsung.com>
2020-03-06 15:05 ` [PATCH 0/5] exynos-ufs: Add support for UFS HCI Alim Akhtar
     [not found]   ` <CGME20200306151021epcas5p40139bc39ddabb00f054f872c2b77db8f@epcas5p4.samsung.com>
2020-03-06 15:05     ` [PATCH 1/5] dt-bindings: phy: Document Samsung UFS PHY bindings Alim Akhtar
2020-03-09 18:10       ` Rob Herring
2020-03-11  5:42         ` Alim Akhtar
     [not found]   ` <CGME20200306151023epcas5p40179ecb7edaea3357c9d652553075b8d@epcas5p4.samsung.com>
2020-03-06 15:05     ` [PATCH 2/5] phy: samsung-ufs: add UFS PHY driver for samsung SoC Alim Akhtar
2020-03-16  5:36       ` Kiwoong Kim
2020-03-16 15:46         ` Alim Akhtar
     [not found]   ` <CGME20200306151024epcas5p491fdbd529fee8ed788de9cd318a80def@epcas5p4.samsung.com>
2020-03-06 15:05     ` [PATCH 3/5] Documentation: devicetree: ufs: Add DT bindings for exynos UFS host controller Alim Akhtar
     [not found]   ` <CGME20200306151026epcas5p2620f97b53e318c6a4a3520b2846e7d48@epcas5p2.samsung.com>
2020-03-06 15:05     ` [PATCH 4/5] scsi: ufs-exynos: add UFS host support for Exynos SoCs Alim Akhtar
2020-03-16  5:33       ` Kiwoong Kim
2020-03-16 15:45         ` Alim Akhtar
     [not found]   ` <CGME20200306151028epcas5p25ec9ccacedf49fa47ebb94bcdff42c54@epcas5p2.samsung.com>
2020-03-06 15:05     ` Alim Akhtar [this message]
2020-03-13  9:05       ` [PATCH 5/5] arm64: dts: Add node for ufs exynos7 Krzysztof Kozlowski
2020-03-13  0:54   ` [PATCH 0/5] exynos-ufs: Add support for UFS HCI Alim Akhtar
2020-03-13  8:23     ` Krzysztof Kozlowski
2020-03-13  8:54       ` Alim Akhtar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200306150529.3370-6-alim.akhtar@samsung.com \
    --to=alim.akhtar@samsung.com \
    --cc=avri.altman@wdc.com \
    --cc=cang@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk@kernel.org \
    --cc=kwmad.kim@samsung.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=robh+dt@kernel.org \
    --cc=stanley.chu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.