Hi,

On Fri, Mar 06, 2020 at 04:03:41PM +0300, Sergey.Semin@baikalelectronics.ru wrote:
> From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> 
> 'Reboot-mode'-type of devices are supposed to work in conjunction with
> 'reboot'-type devices. In particular Baikal-T1 SoC provides a special
> CCU_WDT_RCR register, which is preserved during any type of the CPU
> reset (standard and caused by a watchdog one). Since both of them are
> responsible for the system-wide operation and related with each other
> it would be better to place them at the same place in the dt hierarchy.
> In particular the best location would be the dt root node. Currently
> 'syscon-reboot' device node can be placed anywhere in a dtb as long as
> the corresponding device is created at the system boot-up procedure.
> While according to the corresponding bindings file 'system-boot-mode'
> should be represented as a sub-node of a "syscon", "simple-mfd" node.
> This isn't always suitable especially when the reboot-preserved
> register is provided by some device, which we don't want to declared
> as MFD. In this case it would be good to have the 'syscon-reboot-mode'
> node accepting the 'regmap' property with a phandle reference to the
> 'syscon' dt-node, in the same way the 'syscon-reboot' driver does.
> This is what this patch provides - it makes the driver to handle the
> optional 'regmap' property. In case if one isn't provided the
> previously implemented scheme is expected to be found in dtb.
> 
> Moreover seeing current dt-interface implementation of the
> 'syscon-reboot', 'syscon-poweroff' and 'syscon-reboot-mode' drivers,
> they look more or less similar. All of them handle 'offset' and
> 'mask' dt-properties. While 'value' property is only acceptable
> by the 'syscon-reboot' and 'syscon-poweroff' driver, the 'mode-*'
> properties of 'syscon-reboot-mode' serve to the similar purpose.
> The only strong difference between them is the ability to get the
> syscon regmap from the 'regmap' property. By having this patch merged
> we'll have that difference eliminated, so the interfaces would look
> unified.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: Paul Burton <paulburton@kernel.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> ---

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

>  drivers/power/reset/syscon-reboot-mode.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/reset/syscon-reboot-mode.c b/drivers/power/reset/syscon-reboot-mode.c
> index e0772c9f70f7..f8f8218ae3ee 100644
> --- a/drivers/power/reset/syscon-reboot-mode.c
> +++ b/drivers/power/reset/syscon-reboot-mode.c
> @@ -40,6 +40,7 @@ static int syscon_reboot_mode_probe(struct platform_device *pdev)
>  {
>  	int ret;
>  	struct syscon_reboot_mode *syscon_rbm;
> +	struct regmap *map;
>  
>  	syscon_rbm = devm_kzalloc(&pdev->dev, sizeof(*syscon_rbm), GFP_KERNEL);
>  	if (!syscon_rbm)
> @@ -49,9 +50,13 @@ static int syscon_reboot_mode_probe(struct platform_device *pdev)
>  	syscon_rbm->reboot.write = syscon_reboot_mode_write;
>  	syscon_rbm->mask = 0xffffffff;
>  
> -	syscon_rbm->map = syscon_node_to_regmap(pdev->dev.parent->of_node);
> -	if (IS_ERR(syscon_rbm->map))
> -		return PTR_ERR(syscon_rbm->map);
> +	map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap");
> +	if (IS_ERR(map)) {
> +		map = syscon_node_to_regmap(pdev->dev.parent->of_node);
> +		if (IS_ERR(map))
> +			return PTR_ERR(map);
> +	}
> +	syscon_rbm->map = map;
>  
>  	if (of_property_read_u32(pdev->dev.of_node, "offset",
>  	    &syscon_rbm->offset))
> -- 
> 2.25.1
>