From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Date: Sun, 8 Mar 2020 21:44:37 -0600 Subject: [PATCH v2 13/39] acpi: Add a binding for ACPI settings in the device tree In-Reply-To: <20200309034504.149659-1-sjg@chromium.org> References: <20200309034504.149659-1-sjg@chromium.org> Message-ID: <20200308214442.v2.13.I7842b2dd0d6b475301fc044c6640d8089873053f@changeid> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Devices need to report various identifiers in the ACPI tables. Rather than hard-coding these in drivers it is typically better to put them in the device tree. Add a binding file to describe this. Signed-off-by: Simon Glass --- Changes in v2: - Fix definition of HID - Infer hid-over-i2c CID value - Add the hid-over-i2c binding document doc/device-tree-bindings/device.txt | 36 +++++++++++++++ .../input/hid-over-i2c.txt | 44 +++++++++++++++++++ 2 files changed, 80 insertions(+) create mode 100644 doc/device-tree-bindings/device.txt create mode 100644 doc/device-tree-bindings/input/hid-over-i2c.txt diff --git a/doc/device-tree-bindings/device.txt b/doc/device-tree-bindings/device.txt new file mode 100644 index 0000000000..31ec2fa31b --- /dev/null +++ b/doc/device-tree-bindings/device.txt @@ -0,0 +1,36 @@ +Devices +======= + +Device bindings are described by their own individual binding files. + +U-Boot provides for some optional properties which are documented here. See +also hid-over-i2c.txt which describes HID devices. + + - acpi,has-power-resource : (boolean) true if this device has a power resource. + This causes a PRIC (ACPI PowerResource) to be written containing the + properties provided by this binding, to describe how to handle powering the + device up and down using GPIOs + - acpi,compatible : compatible string to report + - acpi,desc : Contains the string to use as the _DDN (DOS (Disk Operating + System) Device Name) + - acpi,hid : Contains the string to use as the HID (Hardware ID) + identifier _HID + - hid-descr-addr : HID register offset (for Human Interface Devices) + - acpi,probed : Tells U-Boot to add 'linux,probed' to the ACPI tables so that + Linux will not re-init the device + - acpi,uid : _UID value for device + + +Example +------- + +synaptics_touchpad: synaptics-touchpad at 2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + acpi,hid = "PNP0C50"; + acpi,desc = "Synaptics Touchpad"; + interrupts-extended = <&acpi_gpe GPIO_18_IRQ + IRQ_TYPE_EDGE_FALLING>; + acpi,probed; + hid-descr-addr = <0x20>; +}; diff --git a/doc/device-tree-bindings/input/hid-over-i2c.txt b/doc/device-tree-bindings/input/hid-over-i2c.txt new file mode 100644 index 0000000000..c76bafaf98 --- /dev/null +++ b/doc/device-tree-bindings/input/hid-over-i2c.txt @@ -0,0 +1,44 @@ +* HID over I2C Device-Tree bindings + +HID over I2C provides support for various Human Interface Devices over the +I2C bus. These devices can be for example touchpads, keyboards, touch screens +or sensors. + +The specification has been written by Microsoft and is currently available here: +http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx + +If this binding is used, the kernel module i2c-hid will handle the communication +with the device and the generic hid core layer will handle the protocol. + +Required properties: +- compatible: must be "hid-over-i2c" +- reg: i2c slave address +- hid-descr-addr: HID descriptor address +- interrupts: interrupt line + +Additional optional properties: + +Some devices may support additional optional properties to help with, e.g., +power sequencing. The following properties can be supported by one or more +device-specific compatible properties, which should be used in addition to the +"hid-over-i2c" string. + +- compatible: + * "wacom,w9013" (Wacom W9013 digitizer). Supports: + - vdd-supply (3.3V) + - vddl-supply (1.8V) + - post-power-on-delay-ms + +- vdd-supply: phandle of the regulator that provides the supply voltage. +- post-power-on-delay-ms: time required by the device after enabling its regulators + or powering it on, before it is ready for communication. + +Example: + + i2c-hid-dev at 2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + interrupt-parent = <&gpx3>; + interrupts = <3 2>; + }; -- 2.25.1.481.gfbce0eb801-goog