From mboxrd@z Thu Jan 1 00:00:00 1970 From: Walter Lozano Date: Wed, 11 Mar 2020 11:30:16 -0300 Subject: [PATCH v2 3/4] mx6cuboxi: enable OF_CONTROL and DM in SPL In-Reply-To: <20200311143017.28346-1-walter.lozano@collabora.com> References: <20200311143017.28346-1-walter.lozano@collabora.com> Message-ID: <20200311143017.28346-4-walter.lozano@collabora.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In order to take the beneficts of DT and DM in SPL, like reusing the code and avoid redundancy, enable SPL_OF_CONTROL, SPL_DM and SPL_DM_MMC. With this new configuration SPL image is 50 KB, higher than the 38 KB from the previous version, but it still under the 68 KB limit. Signed-off-by: Walter Lozano --- configs/mx6cuboxi_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig index bee7d280f0..7ea79b9064 100644 --- a/configs/mx6cuboxi_defconfig +++ b/configs/mx6cuboxi_defconfig @@ -25,6 +25,7 @@ CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin serial,usbkbd; setenv stdout serial,vga; setenv stderr serial,vga; else setenv stdin serial; setenv stdout serial; setenv stderr serial; fi;" CONFIG_BOUNCE_BUFFER=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y @@ -37,6 +38,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx6dl-hummingboard2-emmc-som-v15" CONFIG_OF_LIST="imx6dl-hummingboard2-emmc-som-v15 imx6q-hummingboard2-emmc-som-v15" CONFIG_MULTI_DTB_FIT=y @@ -45,6 +47,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SPL_DM=y CONFIG_DWC_AHSATA=y CONFIG_DM_MMC=y CONFIG_FSL_USDHC=y -- 2.20.1