All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org, linux-usb@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	jackp@codeaurora.org, robh@kernel.org,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org
Subject: [PATCH 2/6] arm64: dts: qcom: qcs404-evb: Define VBUS pins
Date: Wed, 11 Mar 2020 19:15:13 +0000	[thread overview]
Message-ID: <20200311191517.8221-3-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20200311191517.8221-1-bryan.odonoghue@linaro.org>

Defines VBUS detect and VBUS boost for the QCS404 EVB.

Detect:
VBUS present/absent is presented to the SoC via a GPIO on the EVB. Define
the pin mapping for later use by gpio-usb-conn.

Boost:
An external regulator is used to trigger VBUS on/off via GPIO. This patch
defines the relevant GPIO in the EVB dts.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 522d3ef72df5..62ef9c34b04e 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -4,6 +4,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include "qcs404.dtsi"
 #include "pms405.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	aliases {
@@ -271,6 +273,26 @@ rclk {
 	};
 };
 
+&pms405_gpios {
+	usb_vbus_boost_pin: usb-vbus-boost-pin {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <1>;
+		};
+	};
+	usb3_vbus_pin: usb3-vbus-pin {
+		pinconf {
+			pins = "gpio12";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			power-source = <1>;
+		};
+	};
+};
+
 &wifi {
 	status = "okay";
 	vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>;
-- 
2.25.1


  parent reply	other threads:[~2020-03-11 19:15 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-11 19:15 [PATCH 0/6] Add DT bindings for USB HS/SS in QCS404 Bryan O'Donoghue
2020-03-11 19:15 ` [PATCH 1/6] arm64: dts: qcom: qcs404: Add USB devices and PHYs Bryan O'Donoghue
2020-03-11 19:15 ` Bryan O'Donoghue [this message]
2020-03-11 19:15 ` [PATCH 3/6] arm64: dts: qcom: qcs404-evb: Define USB ID pin Bryan O'Donoghue
2020-03-11 19:15 ` [PATCH 4/6] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator Bryan O'Donoghue
2020-03-11 19:15 ` [PATCH 5/6] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage Bryan O'Donoghue
2020-03-11 19:15 ` [PATCH 6/6] arm64: dts: qcom: qcs404-evb: Enable USB controllers Bryan O'Donoghue
2020-04-08  1:45   ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200311191517.8221-3-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jackp@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.