All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: Michael Schmitz <schmitzmic@gmail.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Christoph Hellwig <hch@lst.de>,
	linux-ide@vger.kernel.org, linux-m68k@lists.linux-m68k.org,
	linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com
Subject: [PATCH v4 19/27] ata: move sata_link_{debounce,resume}() to libata-sata.c
Date: Tue, 17 Mar 2020 15:43:25 +0100	[thread overview]
Message-ID: <20200317144333.2904-20-b.zolnierkie@samsung.com> (raw)
In-Reply-To: <20200317144333.2904-1-b.zolnierkie@samsung.com>

* move sata_link_{debounce,resume}() to libata-sata.c

* add static inline for CONFIG_SATA_HOST=n case (only one,
  for sata_link_resume() is needed)

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32816     572      40   33428    8294 drivers/ata/libata-core.o
after:
  32724     572      40   33336    8238 drivers/ata/libata-core.o

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 138 --------------------------------------
 drivers/ata/libata-sata.c | 138 ++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h    |  14 ++--
 3 files changed, 148 insertions(+), 142 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 37de14e6224f..9c4c7f6d90fc 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3497,144 +3497,6 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
 }
 EXPORT_SYMBOL_GPL(ata_wait_after_reset);
 
-/**
- *	sata_link_debounce - debounce SATA phy status
- *	@link: ATA link to debounce SATA phy status for
- *	@params: timing parameters { interval, duration, timeout } in msec
- *	@deadline: deadline jiffies for the operation
- *
- *	Make sure SStatus of @link reaches stable state, determined by
- *	holding the same value where DET is not 1 for @duration polled
- *	every @interval, before @timeout.  Timeout constraints the
- *	beginning of the stable state.  Because DET gets stuck at 1 on
- *	some controllers after hot unplugging, this functions waits
- *	until timeout then returns 0 if DET is stable at 1.
- *
- *	@timeout is further limited by @deadline.  The sooner of the
- *	two is used.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- *
- *	RETURNS:
- *	0 on success, -errno on failure.
- */
-int sata_link_debounce(struct ata_link *link, const unsigned long *params,
-		       unsigned long deadline)
-{
-	unsigned long interval = params[0];
-	unsigned long duration = params[1];
-	unsigned long last_jiffies, t;
-	u32 last, cur;
-	int rc;
-
-	t = ata_deadline(jiffies, params[2]);
-	if (time_before(t, deadline))
-		deadline = t;
-
-	if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
-		return rc;
-	cur &= 0xf;
-
-	last = cur;
-	last_jiffies = jiffies;
-
-	while (1) {
-		ata_msleep(link->ap, interval);
-		if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
-			return rc;
-		cur &= 0xf;
-
-		/* DET stable? */
-		if (cur == last) {
-			if (cur == 1 && time_before(jiffies, deadline))
-				continue;
-			if (time_after(jiffies,
-				       ata_deadline(last_jiffies, duration)))
-				return 0;
-			continue;
-		}
-
-		/* unstable, start over */
-		last = cur;
-		last_jiffies = jiffies;
-
-		/* Check deadline.  If debouncing failed, return
-		 * -EPIPE to tell upper layer to lower link speed.
-		 */
-		if (time_after(jiffies, deadline))
-			return -EPIPE;
-	}
-}
-EXPORT_SYMBOL_GPL(sata_link_debounce);
-
-/**
- *	sata_link_resume - resume SATA link
- *	@link: ATA link to resume SATA
- *	@params: timing parameters { interval, duration, timeout } in msec
- *	@deadline: deadline jiffies for the operation
- *
- *	Resume SATA phy @link and debounce it.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- *
- *	RETURNS:
- *	0 on success, -errno on failure.
- */
-int sata_link_resume(struct ata_link *link, const unsigned long *params,
-		     unsigned long deadline)
-{
-	int tries = ATA_LINK_RESUME_TRIES;
-	u32 scontrol, serror;
-	int rc;
-
-	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
-		return rc;
-
-	/*
-	 * Writes to SControl sometimes get ignored under certain
-	 * controllers (ata_piix SIDPR).  Make sure DET actually is
-	 * cleared.
-	 */
-	do {
-		scontrol = (scontrol & 0x0f0) | 0x300;
-		if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
-			return rc;
-		/*
-		 * Some PHYs react badly if SStatus is pounded
-		 * immediately after resuming.  Delay 200ms before
-		 * debouncing.
-		 */
-		if (!(link->flags & ATA_LFLAG_NO_DB_DELAY))
-			ata_msleep(link->ap, 200);
-
-		/* is SControl restored correctly? */
-		if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
-			return rc;
-	} while ((scontrol & 0xf0f) != 0x300 && --tries);
-
-	if ((scontrol & 0xf0f) != 0x300) {
-		ata_link_warn(link, "failed to resume link (SControl %X)\n",
-			     scontrol);
-		return 0;
-	}
-
-	if (tries < ATA_LINK_RESUME_TRIES)
-		ata_link_warn(link, "link resume succeeded after %d retries\n",
-			      ATA_LINK_RESUME_TRIES - tries);
-
-	if ((rc = sata_link_debounce(link, params, deadline)))
-		return rc;
-
-	/* clear SError, some PHYs require this even for SRST to work */
-	if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
-		rc = sata_scr_write(link, SCR_ERROR, serror);
-
-	return rc != -EINVAL ? rc : 0;
-}
-EXPORT_SYMBOL_GPL(sata_link_resume);
-
 /**
  *	ata_std_prereset - prepare for reset
  *	@link: ATA link to be reset
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index d66afdc33d54..34852fced999 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -196,6 +196,144 @@ void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
 }
 EXPORT_SYMBOL_GPL(ata_tf_from_fis);
 
+/**
+ *	sata_link_debounce - debounce SATA phy status
+ *	@link: ATA link to debounce SATA phy status for
+ *	@params: timing parameters { interval, duration, timeout } in msec
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Make sure SStatus of @link reaches stable state, determined by
+ *	holding the same value where DET is not 1 for @duration polled
+ *	every @interval, before @timeout.  Timeout constraints the
+ *	beginning of the stable state.  Because DET gets stuck at 1 on
+ *	some controllers after hot unplugging, this functions waits
+ *	until timeout then returns 0 if DET is stable at 1.
+ *
+ *	@timeout is further limited by @deadline.  The sooner of the
+ *	two is used.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+int sata_link_debounce(struct ata_link *link, const unsigned long *params,
+		       unsigned long deadline)
+{
+	unsigned long interval = params[0];
+	unsigned long duration = params[1];
+	unsigned long last_jiffies, t;
+	u32 last, cur;
+	int rc;
+
+	t = ata_deadline(jiffies, params[2]);
+	if (time_before(t, deadline))
+		deadline = t;
+
+	if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
+		return rc;
+	cur &= 0xf;
+
+	last = cur;
+	last_jiffies = jiffies;
+
+	while (1) {
+		ata_msleep(link->ap, interval);
+		if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
+			return rc;
+		cur &= 0xf;
+
+		/* DET stable? */
+		if (cur == last) {
+			if (cur == 1 && time_before(jiffies, deadline))
+				continue;
+			if (time_after(jiffies,
+				       ata_deadline(last_jiffies, duration)))
+				return 0;
+			continue;
+		}
+
+		/* unstable, start over */
+		last = cur;
+		last_jiffies = jiffies;
+
+		/* Check deadline.  If debouncing failed, return
+		 * -EPIPE to tell upper layer to lower link speed.
+		 */
+		if (time_after(jiffies, deadline))
+			return -EPIPE;
+	}
+}
+EXPORT_SYMBOL_GPL(sata_link_debounce);
+
+/**
+ *	sata_link_resume - resume SATA link
+ *	@link: ATA link to resume SATA
+ *	@params: timing parameters { interval, duration, timeout } in msec
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Resume SATA phy @link and debounce it.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+int sata_link_resume(struct ata_link *link, const unsigned long *params,
+		     unsigned long deadline)
+{
+	int tries = ATA_LINK_RESUME_TRIES;
+	u32 scontrol, serror;
+	int rc;
+
+	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+		return rc;
+
+	/*
+	 * Writes to SControl sometimes get ignored under certain
+	 * controllers (ata_piix SIDPR).  Make sure DET actually is
+	 * cleared.
+	 */
+	do {
+		scontrol = (scontrol & 0x0f0) | 0x300;
+		if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+			return rc;
+		/*
+		 * Some PHYs react badly if SStatus is pounded
+		 * immediately after resuming.  Delay 200ms before
+		 * debouncing.
+		 */
+		if (!(link->flags & ATA_LFLAG_NO_DB_DELAY))
+			ata_msleep(link->ap, 200);
+
+		/* is SControl restored correctly? */
+		if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+			return rc;
+	} while ((scontrol & 0xf0f) != 0x300 && --tries);
+
+	if ((scontrol & 0xf0f) != 0x300) {
+		ata_link_warn(link, "failed to resume link (SControl %X)\n",
+			     scontrol);
+		return 0;
+	}
+
+	if (tries < ATA_LINK_RESUME_TRIES)
+		ata_link_warn(link, "link resume succeeded after %d retries\n",
+			      ATA_LINK_RESUME_TRIES - tries);
+
+	if ((rc = sata_link_debounce(link, params, deadline)))
+		return rc;
+
+	/* clear SError, some PHYs require this even for SRST to work */
+	if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
+		rc = sata_scr_write(link, SCR_ERROR, serror);
+
+	return rc != -EINVAL ? rc : 0;
+}
+EXPORT_SYMBOL_GPL(sata_link_resume);
+
 /**
  *	sata_link_scr_lpm - manipulate SControl IPM and SPM fields
  *	@link: ATA link to manipulate SControl for
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 246696cafc4c..f67a7bbb3c35 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1069,10 +1069,6 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
 extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
 extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
 				int (*check_ready)(struct ata_link *link));
-extern int sata_link_debounce(struct ata_link *link,
-			const unsigned long *params, unsigned long deadline);
-extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
-			    unsigned long deadline);
 extern int sata_link_hardreset(struct ata_link *link,
 			const unsigned long *timing, unsigned long deadline,
 			bool *online, int (*check_ready)(struct ata_link *));
@@ -1196,6 +1192,8 @@ extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
 extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
 extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
 extern int sata_set_spd(struct ata_link *link);
+extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
+			    unsigned long deadline);
 #else
 static inline int sata_scr_valid(struct ata_link *link) { return 0; }
 static inline int sata_scr_read(struct ata_link *link, int reg, u32 *val)
@@ -1211,7 +1209,15 @@ static inline int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
 	return -EOPNOTSUPP;
 }
 static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; }
+static inline int sata_link_resume(struct ata_link *link,
+				   const unsigned long *params,
+				   unsigned long deadline)
+{
+	return -EOPNOTSUPP;
+}
 #endif
+extern int sata_link_debounce(struct ata_link *link,
+			const unsigned long *params, unsigned long deadline);
 extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
                             bool spm_wakeup);
 extern int ata_slave_link_init(struct ata_port *ap);
-- 
2.24.1


  parent reply	other threads:[~2020-03-17 14:44 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20200317144340eucas1p1f6f7a6fbd27cbfeaab2ea97fbccb2836@eucas1p1.samsung.com>
2020-03-17 14:43 ` [PATCH v4 00/27] ata: optimize core code size on PATA only setups Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200317144341eucas1p2f76d3656e5d787e000b25da8f0d3b7c2@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 01/27] ata: remove stale maintainership information from core code Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200317144341eucas1p1b9caa7264b35b23e78fcaeb78d865255@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 02/27] ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts Bartlomiej Zolnierkiewicz
2020-03-26  9:45       ` Christoph Hellwig
     [not found]   ` <CGME20200317144342eucas1p2d73deadcdb4cee860dd610f9f8e26bda@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 03/27] ata: make SATA_PMP option selectable only if any SATA host driver is enabled Bartlomiej Zolnierkiewicz
2020-03-17 14:55       ` James Bottomley
2020-03-19 16:15         ` Bartlomiej Zolnierkiewicz
2020-03-26  9:46       ` Christoph Hellwig
     [not found]   ` <CGME20200317144342eucas1p2fd5c2e6ff69f8e10496d0468f01f5601@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 04/27] sata_promise: use ata_cable_sata() Bartlomiej Zolnierkiewicz
2020-03-26  9:46       ` Christoph Hellwig
     [not found]   ` <CGME20200317144343eucas1p2aeb55b3deca6702b7c7128fe7775b708@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 05/27] ata: simplify ata_scsiop_inq_89() Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200317144343eucas1p2eb0fa17c0130d3be0b994110979e6a87@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 06/27] ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200317144344eucas1p12dbd070e54e16a364b58b1c591216ebd@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 07/27] ata: optimize struct ata_force_param size Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200317144345eucas1p1e67d48caa8629fedb301e776e34dc0c1@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 08/27] ata: optimize ata_scsi_rbuf[] size Bartlomiej Zolnierkiewicz
2020-03-26  9:48       ` Christoph Hellwig
     [not found]   ` <CGME20200317144345eucas1p209f6a96605af02cc451786051ebab395@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 09/27] ata: move EXPORT_SYMBOL_GPL()s close to exported code Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200317144346eucas1p2d1e330410bd3482ce01c98db40d5612b@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 10/27] ata: remove EXPORT_SYMBOL_GPL()s not used by modules Bartlomiej Zolnierkiewicz
     [not found]   ` <CGME20200317144346eucas1p201a88e2eb094f1a246d0eb541541131f@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 11/27] ata: fix CodingStyle issues in PATA timings code Bartlomiej Zolnierkiewicz
2020-03-26  9:49       ` Christoph Hellwig
     [not found]   ` <CGME20200317144347eucas1p103561521def960afc46a2531076e18df@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 12/27] ata: separate PATA timings code from libata-core.c Bartlomiej Zolnierkiewicz
2020-03-26  9:49       ` Christoph Hellwig
     [not found]   ` <CGME20200317144347eucas1p293ab462ec3d4990f380f9d652195cdb4@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 13/27] ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() Bartlomiej Zolnierkiewicz
2020-03-26  9:50       ` Christoph Hellwig
     [not found]   ` <CGME20200317144348eucas1p14ad861316b19edaf885a52f9beb5dd2a@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 14/27] ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts Bartlomiej Zolnierkiewicz
2020-03-26  9:50       ` Christoph Hellwig
     [not found]   ` <CGME20200317144348eucas1p2cce1c6e1ce8bafc0e68dec04655f1932@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 15/27] ata: let compiler optimize out ata_eh_set_lpm() " Bartlomiej Zolnierkiewicz
2020-03-26  9:50       ` Christoph Hellwig
     [not found]   ` <CGME20200317144349eucas1p1921dee3dcd097f695ba708c54325f226@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 16/27] ata: start separating SATA specific code from libata-core.c Bartlomiej Zolnierkiewicz
2020-03-26  9:51       ` Christoph Hellwig
     [not found]   ` <CGME20200317144349eucas1p1a2e79758cbdf36c747c8a82cd4ddbd74@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 17/27] ata: move sata_scr_*() to libata-sata.c Bartlomiej Zolnierkiewicz
2020-03-26  9:52       ` Christoph Hellwig
     [not found]   ` <CGME20200317144350eucas1p2caf23e8366434ef2c9954cd4d52f30f1@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 18/27] ata: move *sata_set_spd*() " Bartlomiej Zolnierkiewicz
2020-03-26  9:52       ` Christoph Hellwig
     [not found]   ` <CGME20200317144350eucas1p2270ca7a1757769b238be42c2811172a1@eucas1p2.samsung.com>
2020-03-17 14:43     ` Bartlomiej Zolnierkiewicz [this message]
2020-03-26  9:55       ` [PATCH v4 19/27] ata: move sata_link_{debounce,resume}() " Christoph Hellwig
     [not found]   ` <CGME20200317144350eucas1p157dd88ee3f766ec4fd209172635369aa@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 20/27] ata: move sata_link_hardreset() " Bartlomiej Zolnierkiewicz
2020-03-26  9:57       ` Christoph Hellwig
     [not found]   ` <CGME20200317144351eucas1p1d8d18236e6729d0bf21737a4296f56d7@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 21/27] ata: move ata_qc_complete_multiple() " Bartlomiej Zolnierkiewicz
2020-03-26  9:57       ` Christoph Hellwig
     [not found]   ` <CGME20200317144351eucas1p2020714aa775f0ab3aaea870d25f7fb92@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 22/27] ata: move sata_deb_timing_*() " Bartlomiej Zolnierkiewicz
2020-03-26  9:58       ` Christoph Hellwig
     [not found]   ` <CGME20200317144352eucas1p1ddb279cb52e2ae6f5189878912581162@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 23/27] ata: start separating SATA specific code from libata-scsi.c Bartlomiej Zolnierkiewicz
2020-03-26  9:59       ` Christoph Hellwig
     [not found]   ` <CGME20200317144353eucas1p163ca190ee937e771b4a583408500070a@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 24/27] ata: move ata_sas_*() to libata-sata.c Bartlomiej Zolnierkiewicz
2020-03-26 10:00       ` Christoph Hellwig
     [not found]   ` <CGME20200317144353eucas1p22a8a5d4a9c920db90387720159a26c90@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 25/27] ata: start separating SATA specific code from libata-eh.c Bartlomiej Zolnierkiewicz
2020-03-26 10:00       ` Christoph Hellwig
     [not found]   ` <CGME20200317144353eucas1p120a8f1a0fa5c293ada61b8d06f7aa9ec@eucas1p1.samsung.com>
2020-03-17 14:43     ` [PATCH v4 26/27] ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c Bartlomiej Zolnierkiewicz
2020-03-26 10:00       ` Christoph Hellwig
     [not found]   ` <CGME20200317144354eucas1p250e3fc557c00a80eda42b3332984f078@eucas1p2.samsung.com>
2020-03-17 14:43     ` [PATCH v4 27/27] ata: make "libata.force" kernel parameter optional Bartlomiej Zolnierkiewicz
2020-03-26 10:01       ` Christoph Hellwig
2020-03-26 15:16   ` [PATCH v4 00/27] ata: optimize core code size on PATA only setups Jens Axboe
2020-03-26 16:17     ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200317144333.2904-20-b.zolnierkie@samsung.com \
    --to=b.zolnierkie@samsung.com \
    --cc=axboe@kernel.dk \
    --cc=geert@linux-m68k.org \
    --cc=hch@lst.de \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-m68k@lists.linux-m68k.org \
    --cc=schmitzmic@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.