All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lubomir Rintel <lkundrak@v3.sk>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Daniel Mack <daniel@zonque.org>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Robert Jarzmik <robert.jarzmik@free.fr>,
	Marc Gonzalez <marc.w.gonzalez@free.fr>,
	Mans Rullgard <mans@mansr.com>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>,
	linuxppc-dev@lists.ozlabs.org, linux-serial@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH 04/10] ARM: dts: mmp2-brownstone: Don't redeclare phandle references
Date: Fri, 20 Mar 2020 18:41:01 +0100	[thread overview]
Message-ID: <20200320174107.29406-5-lkundrak@v3.sk> (raw)
In-Reply-To: <20200320174107.29406-1-lkundrak@v3.sk>

Extend the nodes by their phandle references instead of recreating the
tree and declaring references of the same names.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 arch/arm/boot/dts/mmp2-brownstone.dts | 330 +++++++++++++-------------
 1 file changed, 164 insertions(+), 166 deletions(-)

diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
index aaedc4c742ea5..04f1ae1382e7a 100644
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -19,176 +19,174 @@ memory {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
+};
 
-	soc {
-		apb@d4000000 {
-			uart3: uart@d4018000 {
-				status = "okay";
-			};
-			twsi1: i2c@d4011000 {
-				status = "okay";
-				pmic: max8925@3c {
-					compatible = "maxium,max8925";
-					reg = <0x3c>;
-					interrupts = <1>;
-					interrupt-parent = <&intcmux4>;
-					interrupt-controller;
-					#interrupt-cells = <1>;
-					maxim,tsc-irq = <0>;
+&uart3 {
+	status = "okay";
+};
 
-					regulators {
-						SDV1 {
-							regulator-min-microvolt = <637500>;
-							regulator-max-microvolt = <1425000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						SDV2 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2225000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						SDV3 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO1 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO2 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO3 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO4 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO5 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO6 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO7 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO8 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO9 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO10 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-						};
-						LDO11 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO12 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO13 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO14 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO15 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO16 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO17 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO18 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO19 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO20 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-					};
-					backlight {
-						maxim,max8925-dual-string = <0>;
-					};
-					charger {
-						batt-detect = <0>;
-						topoff-threshold = <1>;
-						fast-charge = <7>;
-						no-temp-support = <0>;
-						no-insert-detect = <0>;
-					};
-				};
+&twsi1 {
+	status = "okay";
+	pmic: max8925@3c {
+		compatible = "maxium,max8925";
+		reg = <0x3c>;
+		interrupts = <1>;
+		interrupt-parent = <&intcmux4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		maxim,tsc-irq = <0>;
+
+		regulators {
+			SDV1 {
+				regulator-min-microvolt = <637500>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+				regulator-always-on;
 			};
-			rtc: rtc@d4010000 {
-				status = "okay";
+			SDV2 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-boot-on;
+				regulator-always-on;
 			};
+			SDV3 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO1 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO2 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO3 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO4 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO5 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO6 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO7 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO8 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO9 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO10 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+			};
+			LDO11 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO12 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO13 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO14 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO15 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO16 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO17 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO18 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO19 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO20 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+		backlight {
+			maxim,max8925-dual-string = <0>;
+		};
+		charger {
+			batt-detect = <0>;
+			topoff-threshold = <1>;
+			fast-charge = <7>;
+			no-temp-support = <0>;
+			no-insert-detect = <0>;
 		};
 	};
 };
+
+&rtc {
+	status = "okay";
+};
-- 
2.25.1


  parent reply	other threads:[~2020-03-20 17:41 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-20 17:40 [PATCH 0/10] NS 8250 UART Device Tree improvements Lubomir Rintel
2020-03-20 17:40 ` [PATCH 01/10] ARM: dts: pxa*: Don't redeclare phandle references Lubomir Rintel
2020-03-20 17:40 ` [PATCH 02/10] ARM: dts: pxa*: Fix serial port names Lubomir Rintel
2020-03-20 17:41 ` [PATCH 03/10] ARM: dts: pxa*: Make the serial ports compatible with xscale-uart Lubomir Rintel
2020-03-20 17:41 ` Lubomir Rintel [this message]
2020-03-20 17:41 ` [PATCH 05/10] ARM: dts: mmp*: Fix serial port names Lubomir Rintel
2020-03-20 17:41 ` [PATCH 06/10] ARM: dts: mmp*: Make the serial ports compatible with xscale-uart Lubomir Rintel
2020-03-20 17:41 ` [PATCH 07/10] ARM: dts: tango4: Make /serial compatible with ns16550a Lubomir Rintel
2020-03-21 11:11   ` Måns Rullgård
2020-03-21 11:11     ` Måns Rullgård
2020-03-20 17:41 ` [PATCH 08/10] powerpc/fsl: Make serial ports " Lubomir Rintel
2020-03-23 17:59   ` Rob Herring
2020-03-23 17:59     ` Rob Herring
2020-03-20 17:41 ` [PATCH 09/10] dt-bindings: serial: Move Marvell compatible string to 8250 binding doc Lubomir Rintel
2020-03-20 17:41 ` [PATCH 10/10] dt-bindings: serial: Convert 8250 to json-schema Lubomir Rintel
2020-03-23 19:00   ` Rob Herring
2020-03-23 19:00     ` Rob Herring
2020-03-23 19:01 ` [PATCH 0/10] NS 8250 UART Device Tree improvements Rob Herring
2020-03-23 19:01   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200320174107.29406-5-lkundrak@v3.sk \
    --to=lkundrak@v3.sk \
    --cc=benh@kernel.crashing.org \
    --cc=daniel@zonque.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=haojian.zhuang@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mans@mansr.com \
    --cc=marc.w.gonzalez@free.fr \
    --cc=mark.rutland@arm.com \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    --cc=robert.jarzmik@free.fr \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.