All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jiada Wang <jiada_wang@mentor.com>
To: <nick@shmanahar.org>, <dmitry.torokhov@gmail.com>,
	<jikos@kernel.org>, <benjamin.tissoires@redhat.com>,
	<bsz@semihalf.com>, <rydberg@bitmath.org>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<erosca@de.adit-jv.com>, <Andrew_Gabbasov@mentor.com>,
	<jiada_wang@mentor.com>
Subject: [PATCH v9 03/55] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary
Date: Wed, 25 Mar 2020 06:32:42 -0700	[thread overview]
Message-ID: <20200325133334.19346-4-jiada_wang@mentor.com> (raw)
In-Reply-To: <20200325133334.19346-1-jiada_wang@mentor.com>

From: Nick Dyer <nick.dyer@itdev.co.uk>

The workaround of reading all messages until an invalid is received is a
way of forcing the CHG line high, which means that when using
edge-triggered interrupts the interrupt can be acquired.

With level-triggered interrupts the workaround is unnecessary.

Also, most recent maXTouch chips have a feature called RETRIGEN which, when
enabled, reasserts the interrupt line every cycle if there are messages
waiting. This also makes the workaround unnecessary.

Note: the RETRIGEN feature is only in some firmware versions/chips, it's
not valid simply to enable the bit.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 1ae4e8281e491b22442cd5acdfca1862555f8ecb)
[gdavis: Fix conflicts due to v4.6-rc7 commit eb43335c4095 ("Input:
	 atmel_mxt_ts - use mxt_acquire_irq in mxt_soft_reset").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[jiada: reset use_retrigen_workaround at beginning of mxt_check_retrigen()
	call mxt_check_retrigen() after mxt_acquire_irq() in mxt_initialize()
	replace white-spaces with tab for MXT_COMMS_RETRIGEN]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 51 ++++++++++++++++++++++--
 1 file changed, 48 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 49bdf5cf3a0d..3f1ebe14802f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -20,6 +20,7 @@
 #include <linux/i2c.h>
 #include <linux/input/mt.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/of.h>
 #include <linux/property.h>
 #include <linux/slab.h>
@@ -129,6 +130,7 @@ struct t9_range {
 /* MXT_SPT_COMMSCONFIG_T18 */
 #define MXT_COMMS_CTRL		0
 #define MXT_COMMS_CMD		1
+#define MXT_COMMS_RETRIGEN	BIT(6)
 
 /* MXT_DEBUG_DIAGNOSTIC_T37 */
 #define MXT_DIAGNOSTIC_PAGEUP	0x01
@@ -308,6 +310,7 @@ struct mxt_data {
 	struct t7_config t7_cfg;
 	struct mxt_dbg dbg;
 	struct gpio_desc *reset_gpio;
+	bool use_retrigen_workaround;
 
 	/* Cached parameters from object table */
 	u16 T5_address;
@@ -318,6 +321,7 @@ struct mxt_data {
 	u16 T71_address;
 	u8 T9_reportid_min;
 	u8 T9_reportid_max;
+	u16 T18_address;
 	u8 T19_reportid;
 	u16 T44_address;
 	u8 T100_reportid_min;
@@ -1190,9 +1194,11 @@ static int mxt_acquire_irq(struct mxt_data *data)
 
 	enable_irq(data->irq);
 
-	error = mxt_process_messages_until_invalid(data);
-	if (error)
-		return error;
+	if (data->use_retrigen_workaround) {
+		error = mxt_process_messages_until_invalid(data);
+		if (error)
+			return error;
+	}
 
 	return 0;
 }
@@ -1282,6 +1288,33 @@ static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
 	return crc;
 }
 
+static int mxt_check_retrigen(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	int val;
+
+	data->use_retrigen_workaround = false;
+
+	if (irq_get_trigger_type(data->irq) & IRQF_TRIGGER_LOW)
+		return 0;
+
+	if (data->T18_address) {
+		error = __mxt_read_reg(client,
+				       data->T18_address + MXT_COMMS_CTRL,
+				       1, &val);
+		if (error)
+			return error;
+
+		if (val & MXT_COMMS_RETRIGEN)
+			return 0;
+	}
+
+	dev_warn(&client->dev, "Enabling RETRIGEN workaround\n");
+	data->use_retrigen_workaround = true;
+	return 0;
+}
+
 static int mxt_prepare_cfg_mem(struct mxt_data *data, struct mxt_cfg *cfg)
 {
 	struct device *dev = &data->client->dev;
@@ -1561,6 +1594,10 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
 
 	mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
 
+	ret = mxt_check_retrigen(data);
+	if (ret)
+		goto release_mem;
+
 	ret = mxt_soft_reset(data);
 	if (ret)
 		goto release_mem;
@@ -1604,6 +1641,7 @@ static void mxt_free_object_table(struct mxt_data *data)
 	data->T71_address = 0;
 	data->T9_reportid_min = 0;
 	data->T9_reportid_max = 0;
+	data->T18_address = 0;
 	data->T19_reportid = 0;
 	data->T44_address = 0;
 	data->T100_reportid_min = 0;
@@ -1678,6 +1716,9 @@ static int mxt_parse_object_table(struct mxt_data *data,
 						object->num_report_ids - 1;
 			data->num_touchids = object->num_report_ids;
 			break;
+		case MXT_SPT_COMMSCONFIG_T18:
+			data->T18_address = object->start_address;
+			break;
 		case MXT_SPT_MESSAGECOUNT_T44:
 			data->T44_address = object->start_address;
 			break;
@@ -2145,6 +2186,10 @@ static int mxt_initialize(struct mxt_data *data)
 	if (error)
 		return error;
 
+	error = mxt_check_retrigen(data);
+	if (error)
+		return error;
+
 	error = mxt_sysfs_init(data);
 	if (error)
 		return error;
-- 
2.17.1


  parent reply	other threads:[~2020-03-25 13:33 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-25 13:32 [PATCH v9 00/55] atmel_mxt_ts misc Jiada Wang
2020-03-25 13:32 ` [PATCH v9 01/55] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-03-25 13:32 ` [PATCH v9 02/55] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-03-25 13:32 ` Jiada Wang [this message]
2020-03-25 13:32 ` [PATCH v9 04/55] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-03-25 13:32 ` [PATCH v9 05/55] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-03-25 13:32 ` [PATCH v9 06/55] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-03-25 13:32 ` [PATCH v9 07/55] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 08/55] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 09/55] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-03-25 13:32 ` [PATCH v9 10/55] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-03-25 13:32 ` [PATCH v9 11/55] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-03-25 13:32 ` [PATCH v9 12/55] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-03-25 13:32 ` [PATCH v9 13/55] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-03-25 19:05   ` Dmitry Osipenko
2020-03-27 11:09     ` Wang, Jiada
2020-03-29 18:54       ` Dmitry Osipenko
2020-03-30  4:10         ` Wang, Jiada
2020-03-25 13:32 ` [PATCH v9 14/55] dt-bindings: input: atmel: add suspend mode support Jiada Wang
2020-03-25 13:32 ` [PATCH v9 15/55] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-03-25 13:32 ` [PATCH v9 16/55] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-03-25 13:32 ` [PATCH v9 17/55] Input: atmel_mxt_ts: Rename mxt_fw_version_show to fw_version_show Jiada Wang
2020-03-25 13:32 ` [PATCH v9 18/55] Input: atmel_mxt_ts: Rename mxt_hw_version_show to hw_version_show Jiada Wang
2020-03-25 13:32 ` [PATCH v9 19/55] Input: atmel_mxt_ts: rename mxt_update_fw_store to update_fw_store Jiada Wang
2020-03-25 13:32 ` [PATCH v9 20/55] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 21/55] dt-bindings: input: atmel: provide name of configuration file Jiada Wang
2020-03-25 13:33 ` [PATCH v9 22/55] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-03-25 13:33 ` [PATCH v9 23/55] dt-bindings: input: atmel: support to specify input name Jiada Wang
2020-03-25 13:33 ` [PATCH v9 24/55] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 25/55] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-03-25 13:33 ` [PATCH v9 26/55] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-03-25 13:33 ` [PATCH v9 27/55] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-03-25 13:33 ` [PATCH v9 28/55] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-03-25 13:33 ` [PATCH v9 29/55] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-03-25 13:33 ` [PATCH v9 30/55] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-03-25 13:33 ` [PATCH v9 31/55] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-03-25 13:33 ` [PATCH v9 32/55] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-03-25 13:33 ` [PATCH v9 33/55] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-03-25 13:33 ` [PATCH v9 34/55] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-03-25 13:33 ` [PATCH v9 35/55] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-03-25 13:33 ` [PATCH v9 36/55] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-03-25 13:33 ` [PATCH v9 37/55] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-03-25 13:33 ` [PATCH v9 38/55] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-03-25 13:33 ` [PATCH v9 39/55] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-03-25 13:33 ` [PATCH v9 40/55] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-03-25 13:33 ` [PATCH v9 41/55] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-03-25 13:33 ` [PATCH v9 42/55] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-03-25 13:33 ` [PATCH v9 43/55] dt-bindings: input: atmel: support to set max bytes transferred Jiada Wang
2020-03-25 13:33 ` [PATCH v9 44/55] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 45/55] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 46/55] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 47/55] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 48/55] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-03-25 13:33 ` [PATCH v9 49/55] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-03-25 13:33 ` [PATCH v9 50/55] Input: Atmel: use T44 object to process " Jiada Wang
2020-03-25 13:33 ` [PATCH v9 51/55] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-03-25 13:33 ` [PATCH v9 52/55] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-03-25 19:35   ` Dmitry Osipenko
2020-03-25 19:41     ` Dmitry Osipenko
2020-03-27 12:49     ` Wang, Jiada
2020-03-27 13:37       ` Dmitry Osipenko
2020-03-27 13:43         ` Dmitry Osipenko
2020-03-25 13:33 ` [PATCH v9 53/55] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-03-25 13:33 ` [PATCH v9 54/55] Input: atmel_mxt_ts: Implement synchronization during various operation Jiada Wang
2020-03-25 13:33 ` [PATCH v9 55/55] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200325133334.19346-4-jiada_wang@mentor.com \
    --to=jiada_wang@mentor.com \
    --cc=Andrew_Gabbasov@mentor.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=bsz@semihalf.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=erosca@de.adit-jv.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nick@shmanahar.org \
    --cc=rydberg@bitmath.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.