[PATCH v5 00/27] ata: optimize core code size on PATA only setups

[PATCH v5 00/27] ata: optimize core code size on PATA only setups

[Bartlomiej Zolnierkiewicz]

Hi,

There have been reports in the past of libata core code size
being a problem in migration from deprecated IDE subsystem on
legacy PATA only systems, i.e.:

https://lore.kernel.org/linux-ide/db2838b7-4862-785b-3a1d-3bf09811340a@gmail.com/

This patchset re-organizes libata core code to exclude SATA
specific code from being built for PATA only setups.

The end result is up to 24% (by 23949 bytes, from 101769 bytes to
77820 bytes) smaller libata core code size (as measured for m68k
arch using modified atari_defconfig) on affected setups.

I've tested this patchset using pata_falcon driver under ARAnyM
emulator.


patches #1-11 are general fixes/cleanups done in the process of
making the patchset (there should be no inter-dependencies between
them except patch #10 which depends on patch #9)

patch #12 separates PATA timings code to libata-pata-timings.c file

patches #13-15 let compiler optimize out SATA specific code on
non-SATA hosts by adding !IS_ENABLED(CONFIG_SATA_HOST) instances

patches #16-22 separate SATA only code from libata-core.c file to
libata-sata.c one

patches #23-24 separate SATA only code from libata-scsi.c file to
libata-sata.c one

patches #25-26 separate SATA only code from libata-eh.c file to
libata-sata.c one

patch #27 makes "libata.force" kernel parameter optional


Changes since v4
(https://lore.kernel.org/linux-ide/20200317144333.2904-1-b.zolnierkie@samsung.com/):
- rebased on top of next-20200326
- added Reviewed-by tags from Christoph

Changes since v3
(https://lore.kernel.org/linux-ide/20200227182226.19188-1-b.zolnierkie@samsung.com/):
- rebased on top of next-20200317
- fixed sdev_attrs initializer entry defined twice issue found by
  kbuild-test-robot/sparse in "ata: expose ncq_enable_prio sysfs
  attribute only on NCQ capable hosts" patch

Changes since v2
(https://lore.kernel.org/linux-ide/20200207142734.8431-1-b.zolnierkie@samsung.com/):
- rebased on top of next-20200227
- added "ata: optimize ata_scsi_rbuf[] size" patch

Changes since v1
(https://lore.kernel.org/linux-ide/20200128133343.29905-1-b.zolnierkie@samsung.com/):
- added Acked-by: tag from Tejun to "ata: remove stale maintainership
  information from core code" patch
- added Reviewed-by: tag from Martin to "ata: make SATA_PMP option
  selectable only if any SATA host driver is enabled" patch
- added Reviewed-by: tag from Christoph to following patches:
  - "ata: simplify ata_scsiop_inq_89()"
  - "ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size"
  - "ata: optimize struct ata_force_param size"
  - "ata: move EXPORT_SYMBOL_GPL()s close to exported code"
  - "ata: remove EXPORT_SYMBOL_GPL()s not used by modules"
- converted "ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled()"
  patch to use IS_ENABLED()
- added "ata: let compiler optimize out ata_dev_config_ncq() on
  non-SATA hosts" and "ata: let compiler optimize out ata_eh_set_lpm()
  on non-SATA hosts" patches
- moved "ata: move sata_scr_*() to libata-core-sata.c" patch just
  after "ata: start separating SATA specific code from libata-core.c"
  one
- dropped no longer needed patches (code savings <= 8 bytes):
  - "ata: move ata_do_link_spd_horkage() to libata-core-sata.c"
  - "ata: move ata_dev_config_ncq*() to libata-core-sata.c"
  - "ata: move sata_print_link_status() to libata-core-sata.c"
  - "ata: move sata_down_spd_limit() to libata-core-sata.c"
  - "ata: move sata_link_init_spd() to libata-core-sata.c"
  - "ata: move ata_eh_set_lpm() to libata-core-sata.c"
- removed superfluos ifdefs
- dropped file names in top of file headers
- merged libata-scsi-sata.c and libata-eh-sata.c into libata-sata.c
- emphasised in patch descriptions that atari_defconfig used for
  measurements has been modified (original one is still using
  deprecated IDE subsystem)
- added "ata: make "libata.force" kernel parameter optional" patch

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


Bartlomiej Zolnierkiewicz (27):
  ata: remove stale maintainership information from core code
  ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts
  ata: make SATA_PMP option selectable only if any SATA host driver is
    enabled
  sata_promise: use ata_cable_sata()
  ata: simplify ata_scsiop_inq_89()
  ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size
  ata: optimize struct ata_force_param size
  ata: optimize ata_scsi_rbuf[] size
  ata: move EXPORT_SYMBOL_GPL()s close to exported code
  ata: remove EXPORT_SYMBOL_GPL()s not used by modules
  ata: fix CodingStyle issues in PATA timings code
  ata: separate PATA timings code from libata-core.c
  ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled()
  ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts
  ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts
  ata: start separating SATA specific code from libata-core.c
  ata: move sata_scr_*() to libata-sata.c
  ata: move *sata_set_spd*() to libata-sata.c
  ata: move sata_link_{debounce,resume}() to libata-sata.c
  ata: move sata_link_hardreset() to libata-sata.c
  ata: move ata_qc_complete_multiple() to libata-sata.c
  ata: move sata_deb_timing_*() to libata-sata.c
  ata: start separating SATA specific code from libata-scsi.c
  ata: move ata_sas_*() to libata-sata.c
  ata: start separating SATA specific code from libata-eh.c
  ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c
  ata: make "libata.force" kernel parameter optional

 drivers/ata/Kconfig               |   77 ++
 drivers/ata/Makefile              |    2 +
 drivers/ata/libata-core.c         | 1126 ++--------------------
 drivers/ata/libata-eh.c           |  224 +----
 drivers/ata/libata-pata-timings.c |  192 ++++
 drivers/ata/libata-sata.c         | 1483 +++++++++++++++++++++++++++++
 drivers/ata/libata-scsi.c         |  544 +----------
 drivers/ata/libata-sff.c          |    4 -
 drivers/ata/libata.h              |   25 +-
 drivers/ata/sata_promise.c        |    8 +-
 drivers/scsi/Kconfig              |    1 +
 drivers/scsi/libsas/Kconfig       |    1 +
 include/linux/libata.h            |  172 ++--
 13 files changed, 2015 insertions(+), 1844 deletions(-)
 create mode 100644 drivers/ata/libata-pata-timings.c
 create mode 100644 drivers/ata/libata-sata.c

-- 
2.24.1

[PATCH v5 01/27] ata: remove stale maintainership information from core code

[Bartlomiej Zolnierkiewicz]

In commit 7634ccd2da97 ("libata: maintainership update") from 2018
Jens has officially taken over libata maintainership from Tejun so
remove stale information from core libata code.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 4 ----
 drivers/ata/libata-eh.c   | 4 ----
 drivers/ata/libata-scsi.c | 4 ----
 drivers/ata/libata-sff.c  | 4 ----
 4 files changed, 16 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 42c8728f6117..4991f9d5def8 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2,10 +2,6 @@
 /*
  *  libata-core.c - helper library for ATA
  *
- *  Maintained by:  Tejun Heo <tj@kernel.org>
- *    		    Please ALWAYS copy linux-ide@vger.kernel.org
- *		    on emails.
- *
  *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
  *  Copyright 2003-2004 Jeff Garzik
  *
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 3bfd9da58473..53605c8949d8 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2,10 +2,6 @@
 /*
  *  libata-eh.c - libata error handling
  *
- *  Maintained by:  Tejun Heo <tj@kernel.org>
- *    		    Please ALWAYS copy linux-ide@vger.kernel.org
- *		    on emails.
- *
  *  Copyright 2006 Tejun Heo <htejun@gmail.com>
  *
  *  libata documentation is available via 'make {ps|pdf}docs',
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 75bd7792df02..ebc3de7c363a 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2,10 +2,6 @@
 /*
  *  libata-scsi.c - helper library for ATA
  *
- *  Maintained by:  Tejun Heo <tj@kernel.org>
- *    		    Please ALWAYS copy linux-ide@vger.kernel.org
- *		    on emails.
- *
  *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
  *  Copyright 2003-2004 Jeff Garzik
  *
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 038db94216a9..ae7189d1a568 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2,10 +2,6 @@
 /*
  *  libata-sff.c - helper library for PCI IDE BMDMA
  *
- *  Maintained by:  Tejun Heo <tj@kernel.org>
- *    		    Please ALWAYS copy linux-ide@vger.kernel.org
- *		    on emails.
- *
  *  Copyright 2003-2006 Red Hat, Inc.  All rights reserved.
  *  Copyright 2003-2006 Jeff Garzik
  *
-- 
2.24.1

[PATCH v5 02/27] ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts

[Bartlomiej Zolnierkiewicz]

There is no point in exposing ncq_enable_prio sysfs attribute for
devices on PATA and non-NCQ capable SATA hosts so:

* remove dev_attr_ncq_prio_enable from ata_common_sdev_attrs[]

* add ata_ncq_sdev_attrs[]

* update ATA_NCQ_SHT() macro to use ata_ncq_sdev_attrs[]

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-scsi.c |  8 +++++++-
 include/linux/libata.h    | 11 ++++++++---
 2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index ebc3de7c363a..005c6f2f7d21 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -463,11 +463,17 @@ EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
 
 struct device_attribute *ata_common_sdev_attrs[] = {
 	&dev_attr_unload_heads,
-	&dev_attr_ncq_prio_enable,
 	NULL
 };
 EXPORT_SYMBOL_GPL(ata_common_sdev_attrs);
 
+struct device_attribute *ata_ncq_sdev_attrs[] = {
+	&dev_attr_unload_heads,
+	&dev_attr_ncq_prio_enable,
+	NULL
+};
+EXPORT_SYMBOL_GPL(ata_ncq_sdev_attrs);
+
 /**
  *	ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
  *	@sdev: SCSI device for which BIOS geometry is to be determined
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 710e09dae910..350fa584acde 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1334,6 +1334,7 @@ extern int ata_link_nr_enabled(struct ata_link *link);
 extern const struct ata_port_operations ata_base_port_ops;
 extern const struct ata_port_operations sata_port_ops;
 extern struct device_attribute *ata_common_sdev_attrs[];
+extern struct device_attribute *ata_ncq_sdev_attrs[];
 
 /*
  * All sht initializers (BASE, PIO, BMDMA, NCQ) must be instantiated
@@ -1341,7 +1342,7 @@ extern struct device_attribute *ata_common_sdev_attrs[];
  * edge driver's module reference, otherwise the driver can be unloaded
  * even if the scsi_device is being accessed.
  */
-#define ATA_BASE_SHT(drv_name)					\
+#define __ATA_BASE_SHT(drv_name)				\
 	.module			= THIS_MODULE,			\
 	.name			= drv_name,			\
 	.ioctl			= ata_scsi_ioctl,		\
@@ -1355,11 +1356,15 @@ extern struct device_attribute *ata_common_sdev_attrs[];
 	.slave_configure	= ata_scsi_slave_config,	\
 	.slave_destroy		= ata_scsi_slave_destroy,	\
 	.bios_param		= ata_std_bios_param,		\
-	.unlock_native_capacity	= ata_scsi_unlock_native_capacity, \
+	.unlock_native_capacity	= ata_scsi_unlock_native_capacity
+
+#define ATA_BASE_SHT(drv_name)					\
+	__ATA_BASE_SHT(drv_name),				\
 	.sdev_attrs		= ata_common_sdev_attrs
 
 #define ATA_NCQ_SHT(drv_name)					\
-	ATA_BASE_SHT(drv_name),					\
+	__ATA_BASE_SHT(drv_name),				\
+	.sdev_attrs		= ata_ncq_sdev_attrs,		\
 	.change_queue_depth	= ata_scsi_change_queue_depth
 
 /*
-- 
2.24.1

[PATCH v5 03/27] ata: make SATA_PMP option selectable only if any SATA host driver is enabled

[Bartlomiej Zolnierkiewicz]

There is no reason to expose SATA_PMP config option when no SATA
host drivers are enabled. To fix it add SATA_HOST config option,
make all SATA host drivers select it and finally make SATA_PMP
config options depend on it.

This also serves as preparation for the future changes which
optimize libata core code size on PATA only setups.

CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig         | 40 +++++++++++++++++++++++++++++++++++++
 drivers/scsi/Kconfig        |  1 +
 drivers/scsi/libsas/Kconfig |  1 +
 3 files changed, 42 insertions(+)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a6beb2c5a692..ad7760656f71 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -34,6 +34,9 @@ if ATA
 config ATA_NONSTANDARD
        bool
 
+config SATA_HOST
+	bool
+
 config ATA_VERBOSE_ERROR
 	bool "Verbose ATA error reporting"
 	default y
@@ -73,6 +76,7 @@ config SATA_ZPODD
 
 config SATA_PMP
 	bool "SATA Port Multiplier support"
+	depends on SATA_HOST
 	default y
 	help
 	  This option adds support for SATA Port Multipliers
@@ -85,6 +89,7 @@ comment "Controllers with non-SFF native interface"
 config SATA_AHCI
 	tristate "AHCI SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for AHCI Serial ATA.
 
@@ -111,6 +116,7 @@ config SATA_MOBILE_LPM_POLICY
 
 config SATA_AHCI_PLATFORM
 	tristate "Platform AHCI SATA support"
+	select SATA_HOST
 	help
 	  This option enables support for Platform AHCI Serial ATA
 	  controllers.
@@ -121,6 +127,7 @@ config AHCI_BRCM
 	tristate "Broadcom AHCI SATA support"
 	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
 		   ARCH_BCM_63XX
+	select SATA_HOST
 	help
 	  This option enables support for the AHCI SATA3 controller found on
 	  Broadcom SoC's.
@@ -130,6 +137,7 @@ config AHCI_BRCM
 config AHCI_DA850
 	tristate "DaVinci DA850 AHCI SATA support"
 	depends on ARCH_DAVINCI_DA850
+	select SATA_HOST
 	help
 	  This option enables support for the DaVinci DA850 SoC's
 	  onboard AHCI SATA.
@@ -139,6 +147,7 @@ config AHCI_DA850
 config AHCI_DM816
 	tristate "DaVinci DM816 AHCI SATA support"
 	depends on ARCH_OMAP2PLUS
+	select SATA_HOST
 	help
 	  This option enables support for the DaVinci DM816 SoC's
 	  onboard AHCI SATA controller.
@@ -148,6 +157,7 @@ config AHCI_DM816
 config AHCI_ST
 	tristate "ST AHCI SATA support"
 	depends on ARCH_STI
+	select SATA_HOST
 	help
 	  This option enables support for ST AHCI SATA controller.
 
@@ -157,6 +167,7 @@ config AHCI_IMX
 	tristate "Freescale i.MX AHCI SATA support"
 	depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 	depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
+	select SATA_HOST
 	help
 	  This option enables support for the Freescale i.MX SoC's
 	  onboard AHCI SATA.
@@ -166,6 +177,7 @@ config AHCI_IMX
 config AHCI_CEVA
 	tristate "CEVA AHCI SATA support"
 	depends on OF
+	select SATA_HOST
 	help
 	  This option enables support for the CEVA AHCI SATA.
 	  It can be found on the Xilinx Zynq UltraScale+ MPSoC.
@@ -176,6 +188,7 @@ config AHCI_MTK
 	tristate "MediaTek AHCI SATA support"
 	depends on ARCH_MEDIATEK
 	select MFD_SYSCON
+	select SATA_HOST
 	help
 	  This option enables support for the MediaTek SoC's
 	  onboard AHCI SATA controller.
@@ -185,6 +198,7 @@ config AHCI_MTK
 config AHCI_MVEBU
 	tristate "Marvell EBU AHCI SATA support"
 	depends on ARCH_MVEBU
+	select SATA_HOST
 	help
 	  This option enables support for the Marvebu EBU SoC's
 	  onboard AHCI SATA.
@@ -203,6 +217,7 @@ config AHCI_OCTEON
 config AHCI_SUNXI
 	tristate "Allwinner sunxi AHCI SATA support"
 	depends on ARCH_SUNXI
+	select SATA_HOST
 	help
 	  This option enables support for the Allwinner sunxi SoC's
 	  onboard AHCI SATA.
@@ -212,6 +227,7 @@ config AHCI_SUNXI
 config AHCI_TEGRA
 	tristate "NVIDIA Tegra AHCI SATA support"
 	depends on ARCH_TEGRA
+	select SATA_HOST
 	help
 	  This option enables support for the NVIDIA Tegra SoC's
 	  onboard AHCI SATA.
@@ -221,12 +237,14 @@ config AHCI_TEGRA
 config AHCI_XGENE
 	tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 	depends on PHY_XGENE
+	select SATA_HOST
 	help
 	 This option enables support for APM X-Gene SoC SATA host controller.
 
 config AHCI_QORIQ
 	tristate "Freescale QorIQ AHCI SATA support"
 	depends on OF
+	select SATA_HOST
 	help
 	  This option enables support for the Freescale QorIQ AHCI SoC's
 	  onboard AHCI SATA.
@@ -236,6 +254,7 @@ config AHCI_QORIQ
 config SATA_FSL
 	tristate "Freescale 3.0Gbps SATA support"
 	depends on FSL_SOC
+	select SATA_HOST
 	help
 	  This option enables support for Freescale 3.0Gbps SATA controller.
 	  It can be found on MPC837x and MPC8315.
@@ -245,6 +264,7 @@ config SATA_FSL
 config SATA_GEMINI
 	tristate "Gemini SATA bridge support"
 	depends on ARCH_GEMINI || COMPILE_TEST
+	select SATA_HOST
 	default ARCH_GEMINI
 	help
 	  This enabled support for the FTIDE010 to SATA bridge
@@ -255,6 +275,7 @@ config SATA_GEMINI
 config SATA_AHCI_SEATTLE
 	tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 	depends on ARCH_SEATTLE
+	select SATA_HOST
 	help
 	 This option enables support for AMD Seattle SATA host controller.
 
@@ -263,12 +284,14 @@ config SATA_AHCI_SEATTLE
 config SATA_INIC162X
 	tristate "Initio 162x SATA support (Very Experimental)"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Initio 162x Serial ATA.
 
 config SATA_ACARD_AHCI
 	tristate "ACard AHCI variant (ATP 8620)"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Acard.
 
@@ -277,6 +300,7 @@ config SATA_ACARD_AHCI
 config SATA_SIL24
 	tristate "Silicon Image 3124/3132 SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Silicon Image 3124/3132 Serial ATA.
 
@@ -326,6 +350,7 @@ config PATA_OCTEON_CF
 config SATA_QSTOR
 	tristate "Pacific Digital SATA QStor support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Pacific Digital Serial ATA QStor.
 
@@ -334,6 +359,7 @@ config SATA_QSTOR
 config SATA_SX4
 	tristate "Promise SATA SX4 support (Experimental)"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Promise Serial ATA SX4.
 
@@ -357,6 +383,7 @@ comment "SATA SFF controllers with BMDMA"
 config ATA_PIIX
 	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for ICH5/6/7/8 Serial ATA
 	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
@@ -368,6 +395,7 @@ config SATA_DWC
 	tristate "DesignWare Cores SATA support"
 	depends on DMADEVICES
 	select GENERIC_PHY
+	select SATA_HOST
 	help
 	  This option enables support for the on-chip SATA controller of the
 	  AppliedMicro processor 460EX.
@@ -398,6 +426,7 @@ config SATA_DWC_VDEBUG
 config SATA_HIGHBANK
 	tristate "Calxeda Highbank SATA support"
 	depends on ARCH_HIGHBANK || COMPILE_TEST
+	select SATA_HOST
 	help
 	  This option enables support for the Calxeda Highbank SoC's
 	  onboard SATA.
@@ -409,6 +438,7 @@ config SATA_MV
 	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 		   ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 	select GENERIC_PHY
+	select SATA_HOST
 	help
 	  This option enables support for the Marvell Serial ATA family.
 	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
@@ -419,6 +449,7 @@ config SATA_MV
 config SATA_NV
 	tristate "NVIDIA SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for NVIDIA Serial ATA.
 
@@ -427,6 +458,7 @@ config SATA_NV
 config SATA_PROMISE
 	tristate "Promise SATA TX2/TX4 support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Promise Serial ATA TX2/TX4.
 
@@ -435,6 +467,7 @@ config SATA_PROMISE
 config SATA_RCAR
 	tristate "Renesas R-Car SATA support"
 	depends on ARCH_RENESAS || COMPILE_TEST
+	select SATA_HOST
 	help
 	  This option enables support for Renesas R-Car Serial ATA.
 
@@ -443,6 +476,7 @@ config SATA_RCAR
 config SATA_SIL
 	tristate "Silicon Image SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Silicon Image Serial ATA.
 
@@ -452,6 +486,7 @@ config SATA_SIS
 	tristate "SiS 964/965/966/180 SATA support"
 	depends on PCI
 	select PATA_SIS
+	select SATA_HOST
 	help
 	  This option enables support for SiS Serial ATA on
 	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
@@ -462,6 +497,7 @@ config SATA_SIS
 config SATA_SVW
 	tristate "ServerWorks Frodo / Apple K2 SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Broadcom/Serverworks/Apple K2
 	  SATA support.
@@ -471,6 +507,7 @@ config SATA_SVW
 config SATA_ULI
 	tristate "ULi Electronics SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for ULi Electronics SATA.
 
@@ -479,6 +516,7 @@ config SATA_ULI
 config SATA_VIA
 	tristate "VIA SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for VIA Serial ATA.
 
@@ -487,6 +525,7 @@ config SATA_VIA
 config SATA_VITESSE
 	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 	depends on PCI
+	select SATA_HOST
 	help
 	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 
@@ -1113,6 +1152,7 @@ config PATA_ACPI
 config ATA_GENERIC
 	tristate "Generic ATA support"
 	depends on PCI && ATA_BMDMA
+	select SATA_HOST
 	help
 	  This option enables support for generic BIOS configured
 	  ATA controllers via the new ATA layer
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index b5be6f43ec3f..17feff174f57 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -980,6 +980,7 @@ config SCSI_SYM53C8XX_MMIO
 config SCSI_IPR
 	tristate "IBM Power Linux RAID adapter support"
 	depends on PCI && SCSI && ATA
+	select SATA_HOST
 	select FW_LOADER
 	select IRQ_POLL
 	select SGL_ALLOC
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
index 5c6a5eff2f8e..052ee3a26f6e 100644
--- a/drivers/scsi/libsas/Kconfig
+++ b/drivers/scsi/libsas/Kconfig
@@ -19,6 +19,7 @@ config SCSI_SAS_ATA
 	bool "ATA support for libsas (requires libata)"
 	depends on SCSI_SAS_LIBSAS
 	depends on ATA = y || ATA = SCSI_SAS_LIBSAS
+	select SATA_HOST
 	help
 		Builds in ATA support into libsas.  Will necessitate
 		the loading of libata along with libsas.
-- 
2.24.1

[PATCH v5 04/27] sata_promise: use ata_cable_sata()

[Bartlomiej Zolnierkiewicz]

Use core helper instead of open-coding it.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/sata_promise.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index c451d7d1c817..8729f78cef5f 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -157,7 +157,6 @@ static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
 static void pdc_error_handler(struct ata_port *ap);
 static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
 static int pdc_pata_cable_detect(struct ata_port *ap);
-static int pdc_sata_cable_detect(struct ata_port *ap);
 
 static struct scsi_host_template pdc_ata_sht = {
 	ATA_BASE_SHT(DRV_NAME),
@@ -183,7 +182,7 @@ static const struct ata_port_operations pdc_common_ops = {
 
 static struct ata_port_operations pdc_sata_ops = {
 	.inherits		= &pdc_common_ops,
-	.cable_detect		= pdc_sata_cable_detect,
+	.cable_detect		= ata_cable_sata,
 	.freeze			= pdc_sata_freeze,
 	.thaw			= pdc_sata_thaw,
 	.scr_read		= pdc_sata_scr_read,
@@ -459,11 +458,6 @@ static int pdc_pata_cable_detect(struct ata_port *ap)
 	return ATA_CBL_PATA80;
 }
 
-static int pdc_sata_cable_detect(struct ata_port *ap)
-{
-	return ATA_CBL_SATA;
-}
-
 static int pdc_sata_scr_read(struct ata_link *link,
 			     unsigned int sc_reg, u32 *val)
 {
-- 
2.24.1

[PATCH v5 05/27] ata: simplify ata_scsiop_inq_89()

[Bartlomiej Zolnierkiewicz]

Initialize rbuf[] directly instead of using ata_tf_to_fis(). This
results in simpler and smaller code. It also allows separating
ata_tf_to_fis() into SATA specific libata part in the future.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  20824     105    4096   25025    61c1 drivers/ata/libata-scsi.o
after:
  20782     105    4096   24983    6197 drivers/ata/libata-scsi.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-scsi.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 005c6f2f7d21..0912acb82b80 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2357,10 +2357,6 @@ static unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf)
  */
 static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
 {
-	struct ata_taskfile tf;
-
-	memset(&tf, 0, sizeof(tf));
-
 	rbuf[1] = 0x89;			/* our page code */
 	rbuf[2] = (0x238 >> 8);		/* page size fixed at 238h */
 	rbuf[3] = (0x238 & 0xff);
@@ -2369,14 +2365,14 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
 	memcpy(&rbuf[16], "libata          ", 16);
 	memcpy(&rbuf[32], DRV_VERSION, 4);
 
-	/* we don't store the ATA device signature, so we fake it */
-
-	tf.command = ATA_DRDY;		/* really, this is Status reg */
-	tf.lbal = 0x1;
-	tf.nsect = 0x1;
-
-	ata_tf_to_fis(&tf, 0, 1, &rbuf[36]);	/* TODO: PMP? */
 	rbuf[36] = 0x34;		/* force D2H Reg FIS (34h) */
+	rbuf[37] = (1 << 7);		/* bit 7 indicates Command FIS */
+					/* TODO: PMP? */
+
+	/* we don't store the ATA device signature, so we fake it */
+	rbuf[38] = ATA_DRDY;		/* really, this is Status reg */
+	rbuf[40] = 0x1;
+	rbuf[48] = 0x1;
 
 	rbuf[56] = ATA_CMD_ID_ATA;
 
-- 
2.24.1

[PATCH v5 06/27] ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size

[Bartlomiej Zolnierkiewicz]

Use COMMAND_LINE_SIZE instead PAGE_SIZE for ata_force_param_buf[]
size as libata parameters buffer doesn't need to be bigger than
the command line buffer.

For many architectures this results in decreased libata-core.o
size (COMMAND_LINE_SIZE varies from 256 to 4096 while the minimum
PAGE_SIZE is 4096).

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  41064    4413      40   45517    b1cd drivers/ata/libata-core.o
after:
  41064     573      40   41677    a2cd drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4991f9d5def8..a9a8762448aa 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -52,6 +52,7 @@
 #include <linux/leds.h>
 #include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
+#include <asm/setup.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/libata.h>
@@ -106,7 +107,7 @@ struct ata_force_ent {
 static struct ata_force_ent *ata_force_tbl;
 static int ata_force_tbl_size;
 
-static char ata_force_param_buf[PAGE_SIZE] __initdata;
+static char ata_force_param_buf[COMMAND_LINE_SIZE] __initdata;
 /* param_buf is thrown away after initialization, disallow read */
 module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
 MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/admin-guide/kernel-parameters.rst for details)");
-- 
2.24.1

[PATCH v5 07/27] ata: optimize struct ata_force_param size

[Bartlomiej Zolnierkiewicz]

Optimize struct ata_force_param size by:
- using u8 for cbl and spd_limit fields
- using u16 for lflags field

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  41064     573      40   41677    a2cd drivers/ata/libata-core.o
after:
  40654     573      40   41267    a133 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 6 +++---
 include/linux/libata.h    | 1 +
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a9a8762448aa..a835d2bf243e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -90,12 +90,12 @@ atomic_t ata_print_id = ATOMIC_INIT(0);
 
 struct ata_force_param {
 	const char	*name;
-	unsigned int	cbl;
-	int		spd_limit;
+	u8		cbl;
+	u8		spd_limit;
 	unsigned long	xfer_mask;
 	unsigned int	horkage_on;
 	unsigned int	horkage_off;
-	unsigned int	lflags;
+	u16		lflags;
 };
 
 struct ata_force_ent {
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 350fa584acde..236e4c55be48 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -174,6 +174,7 @@ enum {
 	ATA_DEV_NONE		= 11,	/* no device */
 
 	/* struct ata_link flags */
+	/* NOTE: struct ata_force_param currently stores lflags in u16 */
 	ATA_LFLAG_NO_HRST	= (1 << 1), /* avoid hardreset */
 	ATA_LFLAG_NO_SRST	= (1 << 2), /* avoid softreset */
 	ATA_LFLAG_ASSUME_ATA	= (1 << 3), /* assume ATA class */
-- 
2.24.1

[PATCH v5 08/27] ata: optimize ata_scsi_rbuf[] size

[Bartlomiej Zolnierkiewicz]

Currently the maximum required size of the ata_scsi_rbuf[] is
576 bytes in ata_scsiop_inq_89() so modify ATA_SCSI_RBUF_SIZE
define accordingly.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  20782     105    4096   24983    6197 drivers/ata/libata-scsi.o
after:
  20782     105     576   21463    53d7 drivers/ata/libata-scsi.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0912acb82b80..c2b8428dfb94 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -37,7 +37,7 @@
 #include "libata.h"
 #include "libata-transport.h"
 
-#define ATA_SCSI_RBUF_SIZE	4096
+#define ATA_SCSI_RBUF_SIZE	576
 
 static DEFINE_SPINLOCK(ata_scsi_rbuf_lock);
 static u8 ata_scsi_rbuf[ATA_SCSI_RBUF_SIZE];
-- 
2.24.1

[PATCH v5 09/27] ata: move EXPORT_SYMBOL_GPL()s close to exported code

[Bartlomiej Zolnierkiewicz]

Move EXPORT_SYMBOL_GPL()s close to exported code like it is
done in other kernel subsystems. As a nice side effect this
results in the removal of few ifdefs.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 208 +++++++++++++++-----------------------
 drivers/ata/libata-eh.c   |  20 +++-
 drivers/ata/libata-scsi.c |   8 ++
 3 files changed, 109 insertions(+), 127 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a835d2bf243e..dc48e983ccdb 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -18,6 +18,11 @@
  *	http://www.compactflash.org (CF)
  *	http://www.qic.org (QIC157 - Tape and DSC)
  *	http://www.ce-ata.org (CE-ATA: not supported)
+ *
+ * libata is essentially a library of internal helper functions for
+ * low-level ATA host controller drivers.  As such, the API/ABI is
+ * likely to change as new drivers are added and updated.
+ * Do not depend on ABI/API stability.
  */
 
 #include <linux/kernel.h>
@@ -62,8 +67,11 @@
 
 /* debounce timing parameters in msecs { interval, duration, timeout } */
 const unsigned long sata_deb_timing_normal[]		= {   5,  100, 2000 };
+EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
 const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
+EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
 const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
+EXPORT_SYMBOL_GPL(sata_deb_timing_long);
 
 const struct ata_port_operations ata_base_port_ops = {
 	.prereset		= ata_std_prereset,
@@ -72,6 +80,7 @@ const struct ata_port_operations ata_base_port_ops = {
 	.sched_eh		= ata_std_sched_eh,
 	.end_eh			= ata_std_end_eh,
 };
+EXPORT_SYMBOL_GPL(ata_base_port_ops);
 
 const struct ata_port_operations sata_port_ops = {
 	.inherits		= &ata_base_port_ops,
@@ -79,6 +88,7 @@ const struct ata_port_operations sata_port_ops = {
 	.qc_defer		= ata_std_qc_defer,
 	.hardreset		= sata_std_hardreset,
 };
+EXPORT_SYMBOL_GPL(sata_port_ops);
 
 static unsigned int ata_dev_init_params(struct ata_device *dev,
 					u16 heads, u16 sectors);
@@ -221,6 +231,7 @@ struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap,
 
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(ata_link_next);
 
 /**
  *	ata_dev_next - device iteration helper
@@ -274,6 +285,7 @@ struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link,
 		goto next;
 	return dev;
 }
+EXPORT_SYMBOL_GPL(ata_dev_next);
 
 /**
  *	ata_dev_phys_link - find physical link for a device
@@ -518,6 +530,7 @@ int atapi_cmd_type(u8 opcode)
 		return ATAPI_MISC;
 	}
 }
+EXPORT_SYMBOL_GPL(atapi_cmd_type);
 
 /**
  *	ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
@@ -562,6 +575,7 @@ void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis)
 	fis[18] = (tf->auxiliary >> 16) & 0xff;
 	fis[19] = (tf->auxiliary >> 24) & 0xff;
 }
+EXPORT_SYMBOL_GPL(ata_tf_to_fis);
 
 /**
  *	ata_tf_from_fis - Convert SATA FIS to ATA taskfile
@@ -591,6 +605,7 @@ void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
 	tf->nsect	= fis[12];
 	tf->hob_nsect	= fis[13];
 }
+EXPORT_SYMBOL_GPL(ata_tf_from_fis);
 
 static const u8 ata_rw_cmds[] = {
 	/* pio multi */
@@ -865,6 +880,7 @@ unsigned long ata_pack_xfermask(unsigned long pio_mask,
 		((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) |
 		((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA);
 }
+EXPORT_SYMBOL_GPL(ata_pack_xfermask);
 
 /**
  *	ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks
@@ -886,6 +902,7 @@ void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask,
 	if (udma_mask)
 		*udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA;
 }
+EXPORT_SYMBOL_GPL(ata_unpack_xfermask);
 
 static const struct ata_xfer_ent {
 	int shift, bits;
@@ -920,6 +937,7 @@ u8 ata_xfer_mask2mode(unsigned long xfer_mask)
 			return ent->base + highbit - ent->shift;
 	return 0xff;
 }
+EXPORT_SYMBOL_GPL(ata_xfer_mask2mode);
 
 /**
  *	ata_xfer_mode2mask - Find matching xfer_mask for XFER_*
@@ -943,6 +961,7 @@ unsigned long ata_xfer_mode2mask(u8 xfer_mode)
 				& ~((1 << ent->shift) - 1);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
 
 /**
  *	ata_xfer_mode2shift - Find matching xfer_shift for XFER_*
@@ -965,6 +984,7 @@ int ata_xfer_mode2shift(unsigned long xfer_mode)
 			return ent->shift;
 	return -1;
 }
+EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
 
 /**
  *	ata_mode_string - convert xfer_mask to string
@@ -1011,6 +1031,7 @@ const char *ata_mode_string(unsigned long xfer_mask)
 		return xfer_mode_str[highbit];
 	return "<n/a>";
 }
+EXPORT_SYMBOL_GPL(ata_mode_string);
 
 const char *sata_spd_string(unsigned int spd)
 {
@@ -1091,6 +1112,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf)
 	DPRINTK("unknown device\n");
 	return ATA_DEV_UNKNOWN;
 }
+EXPORT_SYMBOL_GPL(ata_dev_classify);
 
 /**
  *	ata_id_string - Convert IDENTIFY DEVICE page into string
@@ -1127,6 +1149,7 @@ void ata_id_string(const u16 *id, unsigned char *s,
 		len -= 2;
 	}
 }
+EXPORT_SYMBOL_GPL(ata_id_string);
 
 /**
  *	ata_id_c_string - Convert IDENTIFY DEVICE page into C string
@@ -1154,6 +1177,7 @@ void ata_id_c_string(const u16 *id, unsigned char *s,
 		p--;
 	*p = '\0';
 }
+EXPORT_SYMBOL_GPL(ata_id_c_string);
 
 static u64 ata_id_n_sectors(const u16 *id)
 {
@@ -1511,6 +1535,7 @@ unsigned long ata_id_xfermask(const u16 *id)
 
 	return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
 }
+EXPORT_SYMBOL_GPL(ata_id_xfermask);
 
 static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
 {
@@ -1768,6 +1793,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
 		return 1;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
 
 /**
  *	ata_pio_mask_no_iordy	-	Return the non IORDY mask
@@ -1808,6 +1834,7 @@ unsigned int ata_do_dev_read_id(struct ata_device *dev,
 	return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
 				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
 }
+EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
 
 /**
  *	ata_dev_read_id - Read ID data from the specified device
@@ -2780,6 +2807,7 @@ int ata_cable_40wire(struct ata_port *ap)
 {
 	return ATA_CBL_PATA40;
 }
+EXPORT_SYMBOL_GPL(ata_cable_40wire);
 
 /**
  *	ata_cable_80wire	-	return 80 wire cable type
@@ -2793,6 +2821,7 @@ int ata_cable_80wire(struct ata_port *ap)
 {
 	return ATA_CBL_PATA80;
 }
+EXPORT_SYMBOL_GPL(ata_cable_80wire);
 
 /**
  *	ata_cable_unknown	-	return unknown PATA cable.
@@ -2805,6 +2834,7 @@ int ata_cable_unknown(struct ata_port *ap)
 {
 	return ATA_CBL_PATA_UNK;
 }
+EXPORT_SYMBOL_GPL(ata_cable_unknown);
 
 /**
  *	ata_cable_ignore	-	return ignored PATA cable.
@@ -2817,6 +2847,7 @@ int ata_cable_ignore(struct ata_port *ap)
 {
 	return ATA_CBL_PATA_IGN;
 }
+EXPORT_SYMBOL_GPL(ata_cable_ignore);
 
 /**
  *	ata_cable_sata	-	return SATA cable type
@@ -2829,6 +2860,7 @@ int ata_cable_sata(struct ata_port *ap)
 {
 	return ATA_CBL_SATA;
 }
+EXPORT_SYMBOL_GPL(ata_cable_sata);
 
 /**
  *	ata_bus_probe - Reset and probe ATA bus
@@ -3011,6 +3043,7 @@ struct ata_device *ata_dev_pair(struct ata_device *adev)
 		return NULL;
 	return pair;
 }
+EXPORT_SYMBOL_GPL(ata_dev_pair);
 
 /**
  *	sata_down_spd_limit - adjust SATA spd limit downward
@@ -3171,6 +3204,7 @@ int sata_set_spd(struct ata_link *link)
 
 	return 1;
 }
+EXPORT_SYMBOL_GPL(sata_set_spd);
 
 /*
  * This mode timing computation functionality is ported over from
@@ -3245,6 +3279,7 @@ void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
 	if (what & ATA_TIMING_CYCLE  ) m->cycle   = max(a->cycle,   b->cycle);
 	if (what & ATA_TIMING_UDMA   ) m->udma    = max(a->udma,    b->udma);
 }
+EXPORT_SYMBOL_GPL(ata_timing_merge);
 
 const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
 {
@@ -3261,6 +3296,7 @@ const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
 
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(ata_timing_find_mode);
 
 int ata_timing_compute(struct ata_device *adev, unsigned short speed,
 		       struct ata_timing *t, int T, int UT)
@@ -3337,6 +3373,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_timing_compute);
 
 /**
  *	ata_timing_cycle2mode - find xfer mode for the specified cycle duration
@@ -3388,6 +3425,7 @@ u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle)
 
 	return last_mode;
 }
+EXPORT_SYMBOL_GPL(ata_timing_cycle2mode);
 
 /**
  *	ata_down_xfermask_limit - adjust dev xfer masks downward
@@ -3659,6 +3697,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 		*r_failed_dev = dev;
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_do_set_mode);
 
 /**
  *	ata_wait_ready - wait for link to become ready
@@ -3768,6 +3807,7 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
 
 	return ata_wait_ready(link, deadline, check_ready);
 }
+EXPORT_SYMBOL_GPL(ata_wait_after_reset);
 
 /**
  *	sata_link_debounce - debounce SATA phy status
@@ -3838,6 +3878,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params,
 			return -EPIPE;
 	}
 }
+EXPORT_SYMBOL_GPL(sata_link_debounce);
 
 /**
  *	sata_link_resume - resume SATA link
@@ -3904,6 +3945,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
 
 	return rc != -EINVAL ? rc : 0;
 }
+EXPORT_SYMBOL_GPL(sata_link_resume);
 
 /**
  *	sata_link_scr_lpm - manipulate SControl IPM and SPM fields
@@ -3978,6 +4020,7 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 	ehc->i.serror &= ~SERR_PHYRDY_CHG;
 	return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
 }
+EXPORT_SYMBOL_GPL(sata_link_scr_lpm);
 
 /**
  *	ata_std_prereset - prepare for reset
@@ -4023,6 +4066,7 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_std_prereset);
 
 /**
  *	sata_link_hardreset - reset link via SATA phy reset
@@ -4135,6 +4179,7 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 	DPRINTK("EXIT, rc=%d\n", rc);
 	return rc;
 }
+EXPORT_SYMBOL_GPL(sata_link_hardreset);
 
 /**
  *	sata_std_hardreset - COMRESET w/o waiting or classification
@@ -4161,6 +4206,7 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class,
 	rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
 	return online ? -EAGAIN : rc;
 }
+EXPORT_SYMBOL_GPL(sata_std_hardreset);
 
 /**
  *	ata_std_postreset - standard postreset callback
@@ -4189,6 +4235,7 @@ void ata_std_postreset(struct ata_link *link, unsigned int *classes)
 
 	DPRINTK("EXIT\n");
 }
+EXPORT_SYMBOL_GPL(ata_std_postreset);
 
 /**
  *	ata_dev_same_device - Determine whether new ID matches configured device
@@ -4976,11 +5023,13 @@ int ata_std_qc_defer(struct ata_queued_cmd *qc)
 
 	return ATA_DEFER_LINK;
 }
+EXPORT_SYMBOL_GPL(ata_std_qc_defer);
 
 enum ata_completion_errors ata_noop_qc_prep(struct ata_queued_cmd *qc)
 {
 	return AC_ERR_OK;
 }
+EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
 
 /**
  *	ata_sg_init - Associate command with scatter-gather table.
@@ -5002,6 +5051,7 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
 	qc->n_elem = n_elem;
 	qc->cursg = qc->sg;
 }
+EXPORT_SYMBOL_GPL(ata_sg_init);
 
 #ifdef CONFIG_HAS_DMA
 
@@ -5324,6 +5374,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 		__ata_qc_complete(qc);
 	}
 }
+EXPORT_SYMBOL_GPL(ata_qc_complete);
 
 /**
  *	ata_qc_get_active - get bitmask of active qcs
@@ -5406,6 +5457,7 @@ int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active)
 
 	return nr_done;
 }
+EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
 
 /**
  *	ata_qc_issue - issue taskfile to device
@@ -5500,6 +5552,7 @@ int sata_scr_valid(struct ata_link *link)
 
 	return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read;
 }
+EXPORT_SYMBOL_GPL(sata_scr_valid);
 
 /**
  *	sata_scr_read - read SCR register of the specified port
@@ -5527,6 +5580,7 @@ int sata_scr_read(struct ata_link *link, int reg, u32 *val)
 
 	return sata_pmp_scr_read(link, reg, val);
 }
+EXPORT_SYMBOL_GPL(sata_scr_read);
 
 /**
  *	sata_scr_write - write SCR register of the specified port
@@ -5554,6 +5608,7 @@ int sata_scr_write(struct ata_link *link, int reg, u32 val)
 
 	return sata_pmp_scr_write(link, reg, val);
 }
+EXPORT_SYMBOL_GPL(sata_scr_write);
 
 /**
  *	sata_scr_write_flush - write SCR register of the specified port and flush
@@ -5586,6 +5641,7 @@ int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
 
 	return sata_pmp_scr_write(link, reg, val);
 }
+EXPORT_SYMBOL_GPL(sata_scr_write_flush);
 
 /**
  *	ata_phys_link_online - test whether the given link is online
@@ -5660,6 +5716,7 @@ bool ata_link_online(struct ata_link *link)
 	return ata_phys_link_online(link) ||
 		(slave && ata_phys_link_online(slave));
 }
+EXPORT_SYMBOL_GPL(ata_link_online);
 
 /**
  *	ata_link_offline - test whether the given link is offline
@@ -5686,6 +5743,7 @@ bool ata_link_offline(struct ata_link *link)
 	return ata_phys_link_offline(link) &&
 		(!slave || ata_phys_link_offline(slave));
 }
+EXPORT_SYMBOL_GPL(ata_link_offline);
 
 #ifdef CONFIG_PM
 static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
@@ -5872,6 +5930,7 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
 	host->dev->power.power_state = mesg;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_host_suspend);
 
 /**
  *	ata_host_resume - resume host
@@ -5883,6 +5942,7 @@ void ata_host_resume(struct ata_host *host)
 {
 	host->dev->power.power_state = PMSG_ON;
 }
+EXPORT_SYMBOL_GPL(ata_host_resume);
 #endif
 
 const struct device_type ata_port_type = {
@@ -6097,11 +6157,13 @@ void ata_host_get(struct ata_host *host)
 {
 	kref_get(&host->kref);
 }
+EXPORT_SYMBOL_GPL(ata_host_get);
 
 void ata_host_put(struct ata_host *host)
 {
 	kref_put(&host->kref, ata_host_release);
 }
+EXPORT_SYMBOL_GPL(ata_host_put);
 
 /**
  *	ata_host_alloc - allocate and init basic ATA host resources
@@ -6175,6 +6237,7 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
 	kfree(host);
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(ata_host_alloc);
 
 /**
  *	ata_host_alloc_pinfo - alloc host and init with port_info array
@@ -6223,6 +6286,7 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,
 
 	return host;
 }
+EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
 
 /**
  *	ata_slave_link_init - initialize slave link
@@ -6285,6 +6349,7 @@ int ata_slave_link_init(struct ata_port *ap)
 	ap->slave_link = link;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_slave_link_init);
 
 static void ata_host_stop(struct device *gendev, void *res)
 {
@@ -6433,6 +6498,7 @@ int ata_host_start(struct ata_host *host)
 	devres_free(start_dr);
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_host_start);
 
 /**
  *	ata_sas_host_init - Initialize a host struct for sas (ipr, libsas)
@@ -6451,6 +6517,7 @@ void ata_host_init(struct ata_host *host, struct device *dev,
 	host->ops = ops;
 	kref_init(&host->kref);
 }
+EXPORT_SYMBOL_GPL(ata_host_init);
 
 void __ata_port_probe(struct ata_port *ap)
 {
@@ -6606,6 +6673,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 	return rc;
 
 }
+EXPORT_SYMBOL_GPL(ata_host_register);
 
 /**
  *	ata_host_activate - start host, request IRQ and register it
@@ -6668,6 +6736,7 @@ int ata_host_activate(struct ata_host *host, int irq,
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_host_activate);
 
 /**
  *	ata_port_detach - Detach ATA port in preparation of device removal
@@ -6743,6 +6812,7 @@ void ata_host_detach(struct ata_host *host)
 	/* the host is dead now, dissociate ACPI */
 	ata_acpi_dissociate(host);
 }
+EXPORT_SYMBOL_GPL(ata_host_detach);
 
 #ifdef CONFIG_PCI
 
@@ -6763,6 +6833,7 @@ void ata_pci_remove_one(struct pci_dev *pdev)
 
 	ata_host_detach(host);
 }
+EXPORT_SYMBOL_GPL(ata_pci_remove_one);
 
 void ata_pci_shutdown_one(struct pci_dev *pdev)
 {
@@ -6783,6 +6854,7 @@ void ata_pci_shutdown_one(struct pci_dev *pdev)
 			ap->ops->port_stop(ap);
 	}
 }
+EXPORT_SYMBOL_GPL(ata_pci_shutdown_one);
 
 /* move to PCI subsystem */
 int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
@@ -6817,6 +6889,7 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
 
 	return (tmp == bits->val) ? 1 : 0;
 }
+EXPORT_SYMBOL_GPL(pci_test_config_bits);
 
 #ifdef CONFIG_PM
 void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
@@ -6827,6 +6900,7 @@ void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
 	if (mesg.event & PM_EVENT_SLEEP)
 		pci_set_power_state(pdev, PCI_D3hot);
 }
+EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
 
 int ata_pci_device_do_resume(struct pci_dev *pdev)
 {
@@ -6845,6 +6919,7 @@ int ata_pci_device_do_resume(struct pci_dev *pdev)
 	pci_set_master(pdev);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
 
 int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
@@ -6859,6 +6934,7 @@ int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
 
 int ata_pci_device_resume(struct pci_dev *pdev)
 {
@@ -6870,8 +6946,8 @@ int ata_pci_device_resume(struct pci_dev *pdev)
 		ata_host_resume(host);
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_pci_device_resume);
 #endif /* CONFIG_PM */
-
 #endif /* CONFIG_PCI */
 
 /**
@@ -6893,6 +6969,7 @@ int ata_platform_remove_one(struct platform_device *pdev)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_platform_remove_one);
 
 static int __init ata_parse_force_one(char **cur,
 				      struct ata_force_ent *force_ent,
@@ -7117,6 +7194,7 @@ int ata_ratelimit(void)
 {
 	return __ratelimit(&ratelimit);
 }
+EXPORT_SYMBOL_GPL(ata_ratelimit);
 
 /**
  *	ata_msleep - ATA EH owner aware msleep
@@ -7149,6 +7227,7 @@ void ata_msleep(struct ata_port *ap, unsigned int msecs)
 	if (owns_eh)
 		ata_eh_acquire(ap);
 }
+EXPORT_SYMBOL_GPL(ata_msleep);
 
 /**
  *	ata_wait_register - wait until register value changes
@@ -7195,6 +7274,7 @@ u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val,
 
 	return tmp;
 }
+EXPORT_SYMBOL_GPL(ata_wait_register);
 
 /**
  *	sata_lpm_ignore_phy_events - test if PHY event should be ignored
@@ -7248,10 +7328,12 @@ struct ata_port_operations ata_dummy_port_ops = {
 	.sched_eh		= ata_std_sched_eh,
 	.end_eh			= ata_std_end_eh,
 };
+EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
 
 const struct ata_port_info ata_dummy_port_info = {
 	.port_ops		= &ata_dummy_port_ops,
 };
+EXPORT_SYMBOL_GPL(ata_dummy_port_info);
 
 /*
  * Utility print functions
@@ -7319,127 +7401,3 @@ void ata_print_version(const struct device *dev, const char *version)
 	dev_printk(KERN_DEBUG, dev, "version %s\n", version);
 }
 EXPORT_SYMBOL(ata_print_version);
-
-/*
- * libata is essentially a library of internal helper functions for
- * low-level ATA host controller drivers.  As such, the API/ABI is
- * likely to change as new drivers are added and updated.
- * Do not depend on ABI/API stability.
- */
-EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
-EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
-EXPORT_SYMBOL_GPL(sata_deb_timing_long);
-EXPORT_SYMBOL_GPL(ata_base_port_ops);
-EXPORT_SYMBOL_GPL(sata_port_ops);
-EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
-EXPORT_SYMBOL_GPL(ata_dummy_port_info);
-EXPORT_SYMBOL_GPL(ata_link_next);
-EXPORT_SYMBOL_GPL(ata_dev_next);
-EXPORT_SYMBOL_GPL(ata_std_bios_param);
-EXPORT_SYMBOL_GPL(ata_scsi_unlock_native_capacity);
-EXPORT_SYMBOL_GPL(ata_host_init);
-EXPORT_SYMBOL_GPL(ata_host_alloc);
-EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
-EXPORT_SYMBOL_GPL(ata_slave_link_init);
-EXPORT_SYMBOL_GPL(ata_host_start);
-EXPORT_SYMBOL_GPL(ata_host_register);
-EXPORT_SYMBOL_GPL(ata_host_activate);
-EXPORT_SYMBOL_GPL(ata_host_detach);
-EXPORT_SYMBOL_GPL(ata_sg_init);
-EXPORT_SYMBOL_GPL(ata_qc_complete);
-EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
-EXPORT_SYMBOL_GPL(atapi_cmd_type);
-EXPORT_SYMBOL_GPL(ata_tf_to_fis);
-EXPORT_SYMBOL_GPL(ata_tf_from_fis);
-EXPORT_SYMBOL_GPL(ata_pack_xfermask);
-EXPORT_SYMBOL_GPL(ata_unpack_xfermask);
-EXPORT_SYMBOL_GPL(ata_xfer_mask2mode);
-EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
-EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
-EXPORT_SYMBOL_GPL(ata_mode_string);
-EXPORT_SYMBOL_GPL(ata_id_xfermask);
-EXPORT_SYMBOL_GPL(ata_do_set_mode);
-EXPORT_SYMBOL_GPL(ata_std_qc_defer);
-EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
-EXPORT_SYMBOL_GPL(ata_dev_disable);
-EXPORT_SYMBOL_GPL(sata_set_spd);
-EXPORT_SYMBOL_GPL(ata_wait_after_reset);
-EXPORT_SYMBOL_GPL(sata_link_debounce);
-EXPORT_SYMBOL_GPL(sata_link_resume);
-EXPORT_SYMBOL_GPL(sata_link_scr_lpm);
-EXPORT_SYMBOL_GPL(ata_std_prereset);
-EXPORT_SYMBOL_GPL(sata_link_hardreset);
-EXPORT_SYMBOL_GPL(sata_std_hardreset);
-EXPORT_SYMBOL_GPL(ata_std_postreset);
-EXPORT_SYMBOL_GPL(ata_dev_classify);
-EXPORT_SYMBOL_GPL(ata_dev_pair);
-EXPORT_SYMBOL_GPL(ata_ratelimit);
-EXPORT_SYMBOL_GPL(ata_msleep);
-EXPORT_SYMBOL_GPL(ata_wait_register);
-EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
-EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
-EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
-EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
-EXPORT_SYMBOL_GPL(__ata_change_queue_depth);
-EXPORT_SYMBOL_GPL(sata_scr_valid);
-EXPORT_SYMBOL_GPL(sata_scr_read);
-EXPORT_SYMBOL_GPL(sata_scr_write);
-EXPORT_SYMBOL_GPL(sata_scr_write_flush);
-EXPORT_SYMBOL_GPL(ata_link_online);
-EXPORT_SYMBOL_GPL(ata_link_offline);
-#ifdef CONFIG_PM
-EXPORT_SYMBOL_GPL(ata_host_suspend);
-EXPORT_SYMBOL_GPL(ata_host_resume);
-#endif /* CONFIG_PM */
-EXPORT_SYMBOL_GPL(ata_id_string);
-EXPORT_SYMBOL_GPL(ata_id_c_string);
-EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
-EXPORT_SYMBOL_GPL(ata_scsi_simulate);
-
-EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
-EXPORT_SYMBOL_GPL(ata_timing_find_mode);
-EXPORT_SYMBOL_GPL(ata_timing_compute);
-EXPORT_SYMBOL_GPL(ata_timing_merge);
-EXPORT_SYMBOL_GPL(ata_timing_cycle2mode);
-
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL_GPL(pci_test_config_bits);
-EXPORT_SYMBOL_GPL(ata_pci_shutdown_one);
-EXPORT_SYMBOL_GPL(ata_pci_remove_one);
-#ifdef CONFIG_PM
-EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
-EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
-EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
-EXPORT_SYMBOL_GPL(ata_pci_device_resume);
-#endif /* CONFIG_PM */
-#endif /* CONFIG_PCI */
-
-EXPORT_SYMBOL_GPL(ata_platform_remove_one);
-
-EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
-EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
-EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
-EXPORT_SYMBOL_GPL(ata_port_desc);
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
-#endif /* CONFIG_PCI */
-EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
-EXPORT_SYMBOL_GPL(ata_link_abort);
-EXPORT_SYMBOL_GPL(ata_port_abort);
-EXPORT_SYMBOL_GPL(ata_port_freeze);
-EXPORT_SYMBOL_GPL(sata_async_notification);
-EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
-EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
-EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
-EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
-EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
-EXPORT_SYMBOL_GPL(ata_do_eh);
-EXPORT_SYMBOL_GPL(ata_std_error_handler);
-
-EXPORT_SYMBOL_GPL(ata_cable_40wire);
-EXPORT_SYMBOL_GPL(ata_cable_80wire);
-EXPORT_SYMBOL_GPL(ata_cable_unknown);
-EXPORT_SYMBOL_GPL(ata_cable_ignore);
-EXPORT_SYMBOL_GPL(ata_cable_sata);
-EXPORT_SYMBOL_GPL(ata_host_get);
-EXPORT_SYMBOL_GPL(ata_host_put);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 53605c8949d8..1d231cfab26f 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -180,6 +180,7 @@ void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
 	__ata_ehi_pushv_desc(ehi, fmt, args);
 	va_end(args);
 }
+EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
 
 /**
  *	ata_ehi_push_desc - push error description with separator
@@ -203,6 +204,7 @@ void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
 	__ata_ehi_pushv_desc(ehi, fmt, args);
 	va_end(args);
 }
+EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
 
 /**
  *	ata_ehi_clear_desc - clean error description
@@ -218,6 +220,7 @@ void ata_ehi_clear_desc(struct ata_eh_info *ehi)
 	ehi->desc[0] = '\0';
 	ehi->desc_len = 0;
 }
+EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
 
 /**
  *	ata_port_desc - append port description
@@ -245,9 +248,9 @@ void ata_port_desc(struct ata_port *ap, const char *fmt, ...)
 	__ata_ehi_pushv_desc(&ap->link.eh_info, fmt, args);
 	va_end(args);
 }
+EXPORT_SYMBOL_GPL(ata_port_desc);
 
 #ifdef CONFIG_PCI
-
 /**
  *	ata_port_pbar_desc - append PCI BAR description
  *	@ap: target ATA port
@@ -284,7 +287,7 @@ void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
 		ata_port_desc(ap, "%s 0x%llx", name,
 				start + (unsigned long long)offset);
 }
-
+EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
 #endif /* CONFIG_PCI */
 
 static int ata_lookup_timeout_table(u8 cmd)
@@ -969,6 +972,7 @@ void ata_port_schedule_eh(struct ata_port *ap)
 	/* see: ata_std_sched_eh, unless you know better */
 	ap->ops->sched_eh(ap);
 }
+EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
 
 static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link)
 {
@@ -1011,6 +1015,7 @@ int ata_link_abort(struct ata_link *link)
 {
 	return ata_do_link_abort(link->ap, link);
 }
+EXPORT_SYMBOL_GPL(ata_link_abort);
 
 /**
  *	ata_port_abort - abort all qc's on the port
@@ -1028,6 +1033,7 @@ int ata_port_abort(struct ata_port *ap)
 {
 	return ata_do_link_abort(ap, NULL);
 }
+EXPORT_SYMBOL_GPL(ata_port_abort);
 
 /**
  *	__ata_port_freeze - freeze port
@@ -1084,6 +1090,7 @@ int ata_port_freeze(struct ata_port *ap)
 
 	return nr_aborted;
 }
+EXPORT_SYMBOL_GPL(ata_port_freeze);
 
 /**
  *	sata_async_notification - SATA async notification handler
@@ -1157,6 +1164,7 @@ int sata_async_notification(struct ata_port *ap)
 		return 0;
 	}
 }
+EXPORT_SYMBOL_GPL(sata_async_notification);
 
 /**
  *	ata_eh_freeze_port - EH helper to freeze port
@@ -1178,6 +1186,7 @@ void ata_eh_freeze_port(struct ata_port *ap)
 	__ata_port_freeze(ap);
 	spin_unlock_irqrestore(ap->lock, flags);
 }
+EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
 
 /**
  *	ata_port_thaw_port - EH helper to thaw port
@@ -1206,6 +1215,7 @@ void ata_eh_thaw_port(struct ata_port *ap)
 
 	DPRINTK("ata%u port thawed\n", ap->print_id);
 }
+EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
 
 static void ata_eh_scsidone(struct scsi_cmnd *scmd)
 {
@@ -1240,6 +1250,7 @@ void ata_eh_qc_complete(struct ata_queued_cmd *qc)
 	scmd->retries = scmd->allowed;
 	__ata_eh_qc_complete(qc);
 }
+EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
 
 /**
  *	ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
@@ -1259,6 +1270,7 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc)
 		scmd->allowed++;
 	__ata_eh_qc_complete(qc);
 }
+EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
 
 /**
  *	ata_dev_disable - disable ATA device
@@ -1285,6 +1297,7 @@ void ata_dev_disable(struct ata_device *dev)
 	 */
 	ata_ering_clear(&dev->ering);
 }
+EXPORT_SYMBOL_GPL(ata_dev_disable);
 
 /**
  *	ata_eh_detach_dev - detach ATA device
@@ -1727,6 +1740,7 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 
 	ehc->i.err_mask &= ~AC_ERR_DEV;
 }
+EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
 
 /**
  *	ata_eh_analyze_tf - analyze taskfile of a failed qc
@@ -4027,6 +4041,7 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
 
 	ata_eh_finish(ap);
 }
+EXPORT_SYMBOL_GPL(ata_do_eh);
 
 /**
  *	ata_std_error_handler - standard error handler
@@ -4048,6 +4063,7 @@ void ata_std_error_handler(struct ata_port *ap)
 
 	ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
 }
+EXPORT_SYMBOL_GPL(ata_std_error_handler);
 
 #ifdef CONFIG_PM
 /**
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index c2b8428dfb94..24024e728296 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -502,6 +502,7 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_std_bios_param);
 
 /**
  *	ata_scsi_unlock_native_capacity - unlock native capacity
@@ -531,6 +532,7 @@ void ata_scsi_unlock_native_capacity(struct scsi_device *sdev)
 	spin_unlock_irqrestore(ap->lock, flags);
 	ata_port_wait_eh(ap);
 }
+EXPORT_SYMBOL_GPL(ata_scsi_unlock_native_capacity);
 
 /**
  *	ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
@@ -1347,6 +1349,7 @@ int ata_scsi_slave_config(struct scsi_device *sdev)
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
 
 /**
  *	ata_scsi_slave_destroy - SCSI device is about to be destroyed
@@ -1386,6 +1389,7 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev)
 	q->dma_drain_buffer = NULL;
 	q->dma_drain_size = 0;
 }
+EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
 
 /**
  *	__ata_change_queue_depth - helper for ata_scsi_change_queue_depth
@@ -1429,6 +1433,7 @@ int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
 
 	return scsi_change_queue_depth(sdev, queue_depth);
 }
+EXPORT_SYMBOL_GPL(__ata_change_queue_depth);
 
 /**
  *	ata_scsi_change_queue_depth - SCSI callback for queue depth config
@@ -1451,6 +1456,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
 
 	return __ata_change_queue_depth(ap, sdev, queue_depth);
 }
+EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
 
 /**
  *	ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
@@ -4406,6 +4412,7 @@ int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
 
 /**
  *	ata_scsi_simulate - simulate SCSI command on ATA device
@@ -4529,6 +4536,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
 
 	cmd->scsi_done(cmd);
 }
+EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
 {
-- 
2.24.1

[PATCH v5 10/27] ata: remove EXPORT_SYMBOL_GPL()s not used by modules

[Bartlomiej Zolnierkiewicz]

Remove EXPORT_SYMBOL_GPL()s for functions used only by
the core libata code.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  39838     573      40   40451    9e03 drivers/ata/libata-core.o
  21071     105     576   21752    54f8 drivers/ata/libata-scsi.o
  17519      18       0   17537    4481 drivers/ata/libata-eh.o
after:
  39688     573      40   40301    9d6d drivers/ata/libata-core.o
  21040     105     576   21721    54d9 drivers/ata/libata-scsi.o
  17405      18       0   17423    440f drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 5 -----
 drivers/ata/libata-eh.c   | 4 ----
 drivers/ata/libata-scsi.c | 1 -
 3 files changed, 10 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index dc48e983ccdb..2ec1a49388ee 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -80,7 +80,6 @@ const struct ata_port_operations ata_base_port_ops = {
 	.sched_eh		= ata_std_sched_eh,
 	.end_eh			= ata_std_end_eh,
 };
-EXPORT_SYMBOL_GPL(ata_base_port_ops);
 
 const struct ata_port_operations sata_port_ops = {
 	.inherits		= &ata_base_port_ops,
@@ -902,7 +901,6 @@ void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask,
 	if (udma_mask)
 		*udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA;
 }
-EXPORT_SYMBOL_GPL(ata_unpack_xfermask);
 
 static const struct ata_xfer_ent {
 	int shift, bits;
@@ -3425,7 +3423,6 @@ u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle)
 
 	return last_mode;
 }
-EXPORT_SYMBOL_GPL(ata_timing_cycle2mode);
 
 /**
  *	ata_down_xfermask_limit - adjust dev xfer masks downward
@@ -5051,7 +5048,6 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
 	qc->n_elem = n_elem;
 	qc->cursg = qc->sg;
 }
-EXPORT_SYMBOL_GPL(ata_sg_init);
 
 #ifdef CONFIG_HAS_DMA
 
@@ -6157,7 +6153,6 @@ void ata_host_get(struct ata_host *host)
 {
 	kref_get(&host->kref);
 }
-EXPORT_SYMBOL_GPL(ata_host_get);
 
 void ata_host_put(struct ata_host *host)
 {
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 1d231cfab26f..04275f4c8d36 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1215,7 +1215,6 @@ void ata_eh_thaw_port(struct ata_port *ap)
 
 	DPRINTK("ata%u port thawed\n", ap->print_id);
 }
-EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
 
 static void ata_eh_scsidone(struct scsi_cmnd *scmd)
 {
@@ -1250,7 +1249,6 @@ void ata_eh_qc_complete(struct ata_queued_cmd *qc)
 	scmd->retries = scmd->allowed;
 	__ata_eh_qc_complete(qc);
 }
-EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
 
 /**
  *	ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
@@ -1270,7 +1268,6 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc)
 		scmd->allowed++;
 	__ata_eh_qc_complete(qc);
 }
-EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
 
 /**
  *	ata_dev_disable - disable ATA device
@@ -4041,7 +4038,6 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
 
 	ata_eh_finish(ap);
 }
-EXPORT_SYMBOL_GPL(ata_do_eh);
 
 /**
  *	ata_std_error_handler - standard error handler
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 24024e728296..ae63ef7adcb9 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -4536,7 +4536,6 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
 
 	cmd->scsi_done(cmd);
 }
-EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
 {
-- 
2.24.1

[PATCH v5 11/27] ata: fix CodingStyle issues in PATA timings code

[Bartlomiej Zolnierkiewicz]

* fix the overly long line in ata_timing_quantize()

* use standard kernel CodingStyle in ata_timing_merge()

* do not use assignment in if condition in ata_timing_compute()

* fix non-standard comment style in ata_timing_compute()

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 42 +++++++++++++++++++++++++--------------
 1 file changed, 27 insertions(+), 15 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2ec1a49388ee..acdcedcb3d10 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3251,7 +3251,8 @@ static const struct ata_timing ata_timing[] = {
 #define ENOUGH(v, unit)		(((v)-1)/(unit)+1)
 #define EZ(v, unit)		((v)?ENOUGH(((v) * 1000), unit):0)
 
-static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
+static void ata_timing_quantize(const struct ata_timing *t,
+				struct ata_timing *q, int T, int UT)
 {
 	q->setup	= EZ(t->setup,       T);
 	q->act8b	= EZ(t->act8b,       T);
@@ -3267,15 +3268,24 @@ static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q
 void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
 		      struct ata_timing *m, unsigned int what)
 {
-	if (what & ATA_TIMING_SETUP  ) m->setup   = max(a->setup,   b->setup);
-	if (what & ATA_TIMING_ACT8B  ) m->act8b   = max(a->act8b,   b->act8b);
-	if (what & ATA_TIMING_REC8B  ) m->rec8b   = max(a->rec8b,   b->rec8b);
-	if (what & ATA_TIMING_CYC8B  ) m->cyc8b   = max(a->cyc8b,   b->cyc8b);
-	if (what & ATA_TIMING_ACTIVE ) m->active  = max(a->active,  b->active);
-	if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
-	if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
-	if (what & ATA_TIMING_CYCLE  ) m->cycle   = max(a->cycle,   b->cycle);
-	if (what & ATA_TIMING_UDMA   ) m->udma    = max(a->udma,    b->udma);
+	if (what & ATA_TIMING_SETUP)
+		m->setup = max(a->setup, b->setup);
+	if (what & ATA_TIMING_ACT8B)
+		m->act8b = max(a->act8b, b->act8b);
+	if (what & ATA_TIMING_REC8B)
+		m->rec8b = max(a->rec8b, b->rec8b);
+	if (what & ATA_TIMING_CYC8B)
+		m->cyc8b = max(a->cyc8b, b->cyc8b);
+	if (what & ATA_TIMING_ACTIVE)
+		m->active = max(a->active, b->active);
+	if (what & ATA_TIMING_RECOVER)
+		m->recover = max(a->recover, b->recover);
+	if (what & ATA_TIMING_DMACK_HOLD)
+		m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
+	if (what & ATA_TIMING_CYCLE)
+		m->cycle = max(a->cycle, b->cycle);
+	if (what & ATA_TIMING_UDMA)
+		m->udma = max(a->udma, b->udma);
 }
 EXPORT_SYMBOL_GPL(ata_timing_merge);
 
@@ -3306,8 +3316,8 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
 	/*
 	 * Find the mode.
 	 */
-
-	if (!(s = ata_timing_find_mode(speed)))
+	s = ata_timing_find_mode(speed);
+	if (!s)
 		return -EINVAL;
 
 	memcpy(t, s, sizeof(*s));
@@ -3363,9 +3373,11 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
 		t->recover = t->cycle - t->active;
 	}
 
-	/* In a few cases quantisation may produce enough errors to
-	   leave t->cycle too low for the sum of active and recovery
-	   if so we must correct this */
+	/*
+	 * In a few cases quantisation may produce enough errors to
+	 * leave t->cycle too low for the sum of active and recovery
+	 * if so we must correct this.
+	 */
 	if (t->active + t->recover > t->cycle)
 		t->cycle = t->active + t->recover;
 
-- 
2.24.1

[PATCH v5 12/27] ata: separate PATA timings code from libata-core.c

[Bartlomiej Zolnierkiewicz]

Separate PATA timings code from libata-core.c:

* add PATA_TIMINGS config option and make corresponding PATA
  host drivers (and ATA ACPI code) select it

* move following PATA timings code to libata-pata-timings.c:
  - ata_timing_quantize()
  - ata_timing_merge()
  - ata_timing_find_mode()
  - ata_timing_compute()

* group above functions together in <linux/libata.h>

* include libata-pata-timings.c in the build when PATA_TIMINGS
  config option is enabled

* cover ata_timing_cycle2mode() with CONFIG_ATA_ACPI ifdef (it
  depends on code from libata-core.c and libata-pata-timings.c
  while its only user is ATA ACPI)

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  39688     573      40   40301    9d6d drivers/ata/libata-core.o
after:
  37820     572      40   38432    9620 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig               |  21 ++++
 drivers/ata/Makefile              |   1 +
 drivers/ata/libata-core.c         | 183 +---------------------------
 drivers/ata/libata-pata-timings.c | 192 ++++++++++++++++++++++++++++++
 include/linux/libata.h            |  16 ++-
 5 files changed, 226 insertions(+), 187 deletions(-)
 create mode 100644 drivers/ata/libata-pata-timings.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ad7760656f71..5b55ebf56b5a 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -37,6 +37,9 @@ config ATA_NONSTANDARD
 config SATA_HOST
 	bool
 
+config PATA_TIMINGS
+	bool
+
 config ATA_VERBOSE_ERROR
 	bool "Verbose ATA error reporting"
 	default y
@@ -51,6 +54,7 @@ config ATA_VERBOSE_ERROR
 config ATA_ACPI
 	bool "ATA ACPI Support"
 	depends on ACPI
+	select PATA_TIMINGS
 	default y
 	help
 	  This option adds support for ATA-related ACPI objects.
@@ -341,6 +345,7 @@ config PDC_ADMA
 config PATA_OCTEON_CF
 	tristate "OCTEON Boot Bus Compact Flash support"
 	depends on CAVIUM_OCTEON_SOC
+	select PATA_TIMINGS
 	help
 	  This option enables a polled compact flash driver for use with
 	  compact flash cards attached to the OCTEON boot bus.
@@ -536,6 +541,7 @@ comment "PATA SFF controllers with BMDMA"
 config PATA_ALI
 	tristate "ALi PATA support"
 	depends on PCI
+	select PATA_TIMINGS
 	help
 	  This option enables support for the ALi ATA interfaces
 	  found on the many ALi chipsets.
@@ -545,6 +551,7 @@ config PATA_ALI
 config PATA_AMD
 	tristate "AMD/NVidia PATA support"
 	depends on PCI
+	select PATA_TIMINGS
 	help
 	  This option enables support for the AMD and NVidia PATA
 	  interfaces found on the chipsets for Athlon/Athlon64.
@@ -579,6 +586,7 @@ config PATA_ATIIXP
 config PATA_ATP867X
 	tristate "ARTOP/Acard ATP867X PATA support"
 	depends on PCI
+	select PATA_TIMINGS
 	help
 	  This option enables support for ARTOP/Acard ATP867X PATA
 	  controllers.
@@ -588,6 +596,7 @@ config PATA_ATP867X
 config PATA_BK3710
 	tristate "Palmchip BK3710 PATA support"
 	depends on ARCH_DAVINCI
+	select PATA_TIMINGS
 	help
 	  This option enables support for the integrated IDE controller on
 	  the TI DaVinci SoC.
@@ -597,6 +606,7 @@ config PATA_BK3710
 config PATA_CMD64X
 	tristate "CMD64x PATA support"
 	depends on PCI
+	select PATA_TIMINGS
 	help
 	  This option enables support for the CMD64x series chips
 	  except for the CMD640.
@@ -642,6 +652,7 @@ config PATA_CS5536
 config PATA_CYPRESS
 	tristate "Cypress CY82C693 PATA support (Very Experimental)"
 	depends on PCI
+	select PATA_TIMINGS
 	help
 	  This option enables support for the Cypress/Contaq CY82C693
 	  chipset found in some Alpha systems
@@ -660,6 +671,7 @@ config PATA_EFAR
 config PATA_EP93XX
 	tristate "Cirrus Logic EP93xx PATA support"
 	depends on ARCH_EP93XX
+	select PATA_TIMINGS
 	help
 	  This option enables support for the PATA controller in
 	  the Cirrus Logic EP9312 and EP9315 ARM CPU.
@@ -724,6 +736,7 @@ config PATA_HPT3X3_DMA
 config PATA_ICSIDE
 	tristate "Acorn ICS PATA support"
 	depends on ARM && ARCH_ACORN
+	select PATA_TIMINGS
 	help
 	  On Acorn systems, say Y here if you wish to use the ICS PATA
 	  interface card.  This is not required for ICS partition support.
@@ -732,6 +745,7 @@ config PATA_ICSIDE
 config PATA_IMX
 	tristate "PATA support for Freescale iMX"
 	depends on ARCH_MXC
+	select PATA_TIMINGS
 	help
 	  This option enables support for the PATA host available on Freescale
           iMX SoCs.
@@ -817,6 +831,7 @@ config PATA_NINJA32
 config PATA_NS87415
 	tristate "Nat Semi NS87415 PATA support"
 	depends on PCI
+	select PATA_TIMINGS
 	help
 	  This option enables support for the National Semiconductor
 	  NS87415 PCI-IDE controller.
@@ -941,6 +956,7 @@ config PATA_TRIFLEX
 config PATA_VIA
 	tristate "VIA PATA support"
 	depends on PCI
+	select PATA_TIMINGS
 	help
 	  This option enables support for the VIA PATA interfaces
 	  found on the many VIA chipsets.
@@ -974,6 +990,7 @@ comment "PIO-only SFF controllers"
 config PATA_CMD640_PCI
 	tristate "CMD640 PCI PATA support (Experimental)"
 	depends on PCI
+	select PATA_TIMINGS
 	help
 	  This option enables support for the CMD640 PCI IDE
 	  interface chip. Only the primary channel is currently
@@ -1044,6 +1061,7 @@ config PATA_MPIIX
 config PATA_NS87410
 	tristate "Nat Semi NS87410 PATA support"
 	depends on PCI
+	select PATA_TIMINGS
 	help
 	  This option enables support for the National Semiconductor
 	  NS87410 PCI-IDE controller.
@@ -1124,6 +1142,7 @@ config PATA_RZ1000
 config PATA_SAMSUNG_CF
 	tristate "Samsung SoC PATA support"
 	depends on SAMSUNG_DEV_IDE
+	select PATA_TIMINGS
 	help
 	  This option enables basic support for Samsung's S3C/S5P board
 	  PATA controllers via the new ATA layer
@@ -1143,6 +1162,7 @@ comment "Generic fallback / legacy drivers"
 config PATA_ACPI
 	tristate "ACPI firmware driver for PATA"
 	depends on ATA_ACPI && ATA_BMDMA && PCI
+	select PATA_TIMINGS
 	help
 	  This option enables an ACPI method driver which drives
 	  motherboard PATA controller interfaces through the ACPI
@@ -1162,6 +1182,7 @@ config ATA_GENERIC
 config PATA_LEGACY
 	tristate "Legacy ISA PATA support (Experimental)"
 	depends on (ISA || PCI)
+	select PATA_TIMINGS
 	help
 	  This option enables support for ISA/VLB/PCI bus legacy PATA
 	  ports and allows them to be accessed via the new ATA layer.
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index d8cc2e04a6c7..cdaf965fed25 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -127,3 +127,4 @@ libata-$(CONFIG_ATA_SFF)	+= libata-sff.o
 libata-$(CONFIG_SATA_PMP)	+= libata-pmp.o
 libata-$(CONFIG_ATA_ACPI)	+= libata-acpi.o
 libata-$(CONFIG_SATA_ZPODD)	+= libata-zpodd.o
+libata-$(CONFIG_PATA_TIMINGS)	+= libata-pata-timings.o
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index acdcedcb3d10..0a56968e2e98 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3204,187 +3204,7 @@ int sata_set_spd(struct ata_link *link)
 }
 EXPORT_SYMBOL_GPL(sata_set_spd);
 
-/*
- * This mode timing computation functionality is ported over from
- * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
- */
-/*
- * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
- * These were taken from ATA/ATAPI-6 standard, rev 0a, except
- * for UDMA6, which is currently supported only by Maxtor drives.
- *
- * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0.
- */
-
-static const struct ata_timing ata_timing[] = {
-/*	{ XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0,  960,   0 }, */
-	{ XFER_PIO_0,     70, 290, 240, 600, 165, 150, 0,  600,   0 },
-	{ XFER_PIO_1,     50, 290,  93, 383, 125, 100, 0,  383,   0 },
-	{ XFER_PIO_2,     30, 290,  40, 330, 100,  90, 0,  240,   0 },
-	{ XFER_PIO_3,     30,  80,  70, 180,  80,  70, 0,  180,   0 },
-	{ XFER_PIO_4,     25,  70,  25, 120,  70,  25, 0,  120,   0 },
-	{ XFER_PIO_5,     15,  65,  25, 100,  65,  25, 0,  100,   0 },
-	{ XFER_PIO_6,     10,  55,  20,  80,  55,  20, 0,   80,   0 },
-
-	{ XFER_SW_DMA_0, 120,   0,   0,   0, 480, 480, 50, 960,   0 },
-	{ XFER_SW_DMA_1,  90,   0,   0,   0, 240, 240, 30, 480,   0 },
-	{ XFER_SW_DMA_2,  60,   0,   0,   0, 120, 120, 20, 240,   0 },
-
-	{ XFER_MW_DMA_0,  60,   0,   0,   0, 215, 215, 20, 480,   0 },
-	{ XFER_MW_DMA_1,  45,   0,   0,   0,  80,  50, 5,  150,   0 },
-	{ XFER_MW_DMA_2,  25,   0,   0,   0,  70,  25, 5,  120,   0 },
-	{ XFER_MW_DMA_3,  25,   0,   0,   0,  65,  25, 5,  100,   0 },
-	{ XFER_MW_DMA_4,  25,   0,   0,   0,  55,  20, 5,   80,   0 },
-
-/*	{ XFER_UDMA_SLOW,  0,   0,   0,   0,   0,   0, 0,    0, 150 }, */
-	{ XFER_UDMA_0,     0,   0,   0,   0,   0,   0, 0,    0, 120 },
-	{ XFER_UDMA_1,     0,   0,   0,   0,   0,   0, 0,    0,  80 },
-	{ XFER_UDMA_2,     0,   0,   0,   0,   0,   0, 0,    0,  60 },
-	{ XFER_UDMA_3,     0,   0,   0,   0,   0,   0, 0,    0,  45 },
-	{ XFER_UDMA_4,     0,   0,   0,   0,   0,   0, 0,    0,  30 },
-	{ XFER_UDMA_5,     0,   0,   0,   0,   0,   0, 0,    0,  20 },
-	{ XFER_UDMA_6,     0,   0,   0,   0,   0,   0, 0,    0,  15 },
-
-	{ 0xFF }
-};
-
-#define ENOUGH(v, unit)		(((v)-1)/(unit)+1)
-#define EZ(v, unit)		((v)?ENOUGH(((v) * 1000), unit):0)
-
-static void ata_timing_quantize(const struct ata_timing *t,
-				struct ata_timing *q, int T, int UT)
-{
-	q->setup	= EZ(t->setup,       T);
-	q->act8b	= EZ(t->act8b,       T);
-	q->rec8b	= EZ(t->rec8b,       T);
-	q->cyc8b	= EZ(t->cyc8b,       T);
-	q->active	= EZ(t->active,      T);
-	q->recover	= EZ(t->recover,     T);
-	q->dmack_hold	= EZ(t->dmack_hold,  T);
-	q->cycle	= EZ(t->cycle,       T);
-	q->udma		= EZ(t->udma,       UT);
-}
-
-void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
-		      struct ata_timing *m, unsigned int what)
-{
-	if (what & ATA_TIMING_SETUP)
-		m->setup = max(a->setup, b->setup);
-	if (what & ATA_TIMING_ACT8B)
-		m->act8b = max(a->act8b, b->act8b);
-	if (what & ATA_TIMING_REC8B)
-		m->rec8b = max(a->rec8b, b->rec8b);
-	if (what & ATA_TIMING_CYC8B)
-		m->cyc8b = max(a->cyc8b, b->cyc8b);
-	if (what & ATA_TIMING_ACTIVE)
-		m->active = max(a->active, b->active);
-	if (what & ATA_TIMING_RECOVER)
-		m->recover = max(a->recover, b->recover);
-	if (what & ATA_TIMING_DMACK_HOLD)
-		m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
-	if (what & ATA_TIMING_CYCLE)
-		m->cycle = max(a->cycle, b->cycle);
-	if (what & ATA_TIMING_UDMA)
-		m->udma = max(a->udma, b->udma);
-}
-EXPORT_SYMBOL_GPL(ata_timing_merge);
-
-const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
-{
-	const struct ata_timing *t = ata_timing;
-
-	while (xfer_mode > t->mode)
-		t++;
-
-	if (xfer_mode == t->mode)
-		return t;
-
-	WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n",
-			__func__, xfer_mode);
-
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(ata_timing_find_mode);
-
-int ata_timing_compute(struct ata_device *adev, unsigned short speed,
-		       struct ata_timing *t, int T, int UT)
-{
-	const u16 *id = adev->id;
-	const struct ata_timing *s;
-	struct ata_timing p;
-
-	/*
-	 * Find the mode.
-	 */
-	s = ata_timing_find_mode(speed);
-	if (!s)
-		return -EINVAL;
-
-	memcpy(t, s, sizeof(*s));
-
-	/*
-	 * If the drive is an EIDE drive, it can tell us it needs extended
-	 * PIO/MW_DMA cycle timing.
-	 */
-
-	if (id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE drive */
-		memset(&p, 0, sizeof(p));
-
-		if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
-			if (speed <= XFER_PIO_2)
-				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
-			else if ((speed <= XFER_PIO_4) ||
-				 (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
-				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
-		} else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
-			p.cycle = id[ATA_ID_EIDE_DMA_MIN];
-
-		ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
-	}
-
-	/*
-	 * Convert the timing to bus clock counts.
-	 */
-
-	ata_timing_quantize(t, t, T, UT);
-
-	/*
-	 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
-	 * S.M.A.R.T * and some other commands. We have to ensure that the
-	 * DMA cycle timing is slower/equal than the fastest PIO timing.
-	 */
-
-	if (speed > XFER_PIO_6) {
-		ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
-		ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
-	}
-
-	/*
-	 * Lengthen active & recovery time so that cycle time is correct.
-	 */
-
-	if (t->act8b + t->rec8b < t->cyc8b) {
-		t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
-		t->rec8b = t->cyc8b - t->act8b;
-	}
-
-	if (t->active + t->recover < t->cycle) {
-		t->active += (t->cycle - (t->active + t->recover)) / 2;
-		t->recover = t->cycle - t->active;
-	}
-
-	/*
-	 * In a few cases quantisation may produce enough errors to
-	 * leave t->cycle too low for the sum of active and recovery
-	 * if so we must correct this.
-	 */
-	if (t->active + t->recover > t->cycle)
-		t->cycle = t->active + t->recover;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ata_timing_compute);
-
+#ifdef CONFIG_ATA_ACPI
 /**
  *	ata_timing_cycle2mode - find xfer mode for the specified cycle duration
  *	@xfer_shift: ATA_SHIFT_* value for transfer type to examine.
@@ -3435,6 +3255,7 @@ u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle)
 
 	return last_mode;
 }
+#endif
 
 /**
  *	ata_down_xfermask_limit - adjust dev xfer masks downward
diff --git a/drivers/ata/libata-pata-timings.c b/drivers/ata/libata-pata-timings.c
new file mode 100644
index 000000000000..af341226cc64
--- /dev/null
+++ b/drivers/ata/libata-pata-timings.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Helper library for PATA timings
+ *
+ *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
+ *  Copyright 2003-2004 Jeff Garzik
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+
+/*
+ * This mode timing computation functionality is ported over from
+ * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
+ */
+/*
+ * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
+ * These were taken from ATA/ATAPI-6 standard, rev 0a, except
+ * for UDMA6, which is currently supported only by Maxtor drives.
+ *
+ * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0.
+ */
+
+static const struct ata_timing ata_timing[] = {
+/*	{ XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0,  960,   0 }, */
+	{ XFER_PIO_0,     70, 290, 240, 600, 165, 150, 0,  600,   0 },
+	{ XFER_PIO_1,     50, 290,  93, 383, 125, 100, 0,  383,   0 },
+	{ XFER_PIO_2,     30, 290,  40, 330, 100,  90, 0,  240,   0 },
+	{ XFER_PIO_3,     30,  80,  70, 180,  80,  70, 0,  180,   0 },
+	{ XFER_PIO_4,     25,  70,  25, 120,  70,  25, 0,  120,   0 },
+	{ XFER_PIO_5,     15,  65,  25, 100,  65,  25, 0,  100,   0 },
+	{ XFER_PIO_6,     10,  55,  20,  80,  55,  20, 0,   80,   0 },
+
+	{ XFER_SW_DMA_0, 120,   0,   0,   0, 480, 480, 50, 960,   0 },
+	{ XFER_SW_DMA_1,  90,   0,   0,   0, 240, 240, 30, 480,   0 },
+	{ XFER_SW_DMA_2,  60,   0,   0,   0, 120, 120, 20, 240,   0 },
+
+	{ XFER_MW_DMA_0,  60,   0,   0,   0, 215, 215, 20, 480,   0 },
+	{ XFER_MW_DMA_1,  45,   0,   0,   0,  80,  50, 5,  150,   0 },
+	{ XFER_MW_DMA_2,  25,   0,   0,   0,  70,  25, 5,  120,   0 },
+	{ XFER_MW_DMA_3,  25,   0,   0,   0,  65,  25, 5,  100,   0 },
+	{ XFER_MW_DMA_4,  25,   0,   0,   0,  55,  20, 5,   80,   0 },
+
+/*	{ XFER_UDMA_SLOW,  0,   0,   0,   0,   0,   0, 0,    0, 150 }, */
+	{ XFER_UDMA_0,     0,   0,   0,   0,   0,   0, 0,    0, 120 },
+	{ XFER_UDMA_1,     0,   0,   0,   0,   0,   0, 0,    0,  80 },
+	{ XFER_UDMA_2,     0,   0,   0,   0,   0,   0, 0,    0,  60 },
+	{ XFER_UDMA_3,     0,   0,   0,   0,   0,   0, 0,    0,  45 },
+	{ XFER_UDMA_4,     0,   0,   0,   0,   0,   0, 0,    0,  30 },
+	{ XFER_UDMA_5,     0,   0,   0,   0,   0,   0, 0,    0,  20 },
+	{ XFER_UDMA_6,     0,   0,   0,   0,   0,   0, 0,    0,  15 },
+
+	{ 0xFF }
+};
+
+#define ENOUGH(v, unit)		(((v)-1)/(unit)+1)
+#define EZ(v, unit)		((v)?ENOUGH(((v) * 1000), unit):0)
+
+static void ata_timing_quantize(const struct ata_timing *t,
+				struct ata_timing *q, int T, int UT)
+{
+	q->setup	= EZ(t->setup,       T);
+	q->act8b	= EZ(t->act8b,       T);
+	q->rec8b	= EZ(t->rec8b,       T);
+	q->cyc8b	= EZ(t->cyc8b,       T);
+	q->active	= EZ(t->active,      T);
+	q->recover	= EZ(t->recover,     T);
+	q->dmack_hold	= EZ(t->dmack_hold,  T);
+	q->cycle	= EZ(t->cycle,       T);
+	q->udma		= EZ(t->udma,       UT);
+}
+
+void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
+		      struct ata_timing *m, unsigned int what)
+{
+	if (what & ATA_TIMING_SETUP)
+		m->setup = max(a->setup, b->setup);
+	if (what & ATA_TIMING_ACT8B)
+		m->act8b = max(a->act8b, b->act8b);
+	if (what & ATA_TIMING_REC8B)
+		m->rec8b = max(a->rec8b, b->rec8b);
+	if (what & ATA_TIMING_CYC8B)
+		m->cyc8b = max(a->cyc8b, b->cyc8b);
+	if (what & ATA_TIMING_ACTIVE)
+		m->active = max(a->active, b->active);
+	if (what & ATA_TIMING_RECOVER)
+		m->recover = max(a->recover, b->recover);
+	if (what & ATA_TIMING_DMACK_HOLD)
+		m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
+	if (what & ATA_TIMING_CYCLE)
+		m->cycle = max(a->cycle, b->cycle);
+	if (what & ATA_TIMING_UDMA)
+		m->udma = max(a->udma, b->udma);
+}
+EXPORT_SYMBOL_GPL(ata_timing_merge);
+
+const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
+{
+	const struct ata_timing *t = ata_timing;
+
+	while (xfer_mode > t->mode)
+		t++;
+
+	if (xfer_mode == t->mode)
+		return t;
+
+	WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n",
+			__func__, xfer_mode);
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(ata_timing_find_mode);
+
+int ata_timing_compute(struct ata_device *adev, unsigned short speed,
+		       struct ata_timing *t, int T, int UT)
+{
+	const u16 *id = adev->id;
+	const struct ata_timing *s;
+	struct ata_timing p;
+
+	/*
+	 * Find the mode.
+	 */
+	s = ata_timing_find_mode(speed);
+	if (!s)
+		return -EINVAL;
+
+	memcpy(t, s, sizeof(*s));
+
+	/*
+	 * If the drive is an EIDE drive, it can tell us it needs extended
+	 * PIO/MW_DMA cycle timing.
+	 */
+
+	if (id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE drive */
+		memset(&p, 0, sizeof(p));
+
+		if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
+			if (speed <= XFER_PIO_2)
+				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
+			else if ((speed <= XFER_PIO_4) ||
+				 (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
+				p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
+		} else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
+			p.cycle = id[ATA_ID_EIDE_DMA_MIN];
+
+		ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
+	}
+
+	/*
+	 * Convert the timing to bus clock counts.
+	 */
+
+	ata_timing_quantize(t, t, T, UT);
+
+	/*
+	 * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
+	 * S.M.A.R.T * and some other commands. We have to ensure that the
+	 * DMA cycle timing is slower/equal than the fastest PIO timing.
+	 */
+
+	if (speed > XFER_PIO_6) {
+		ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
+		ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
+	}
+
+	/*
+	 * Lengthen active & recovery time so that cycle time is correct.
+	 */
+
+	if (t->act8b + t->rec8b < t->cyc8b) {
+		t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
+		t->rec8b = t->cyc8b - t->act8b;
+	}
+
+	if (t->active + t->recover < t->cycle) {
+		t->active += (t->cycle - (t->active + t->recover)) / 2;
+		t->recover = t->cycle - t->active;
+	}
+
+	/*
+	 * In a few cases quantisation may produce enough errors to
+	 * leave t->cycle too low for the sum of active and recovery
+	 * if so we must correct this.
+	 */
+	if (t->active + t->recover > t->cycle)
+		t->cycle = t->active + t->recover;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_timing_compute);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 236e4c55be48..500b709ed3de 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1205,12 +1205,6 @@ extern int ata_cable_unknown(struct ata_port *ap);
 
 /* Timing helpers */
 extern unsigned int ata_pio_need_iordy(const struct ata_device *);
-extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
-extern int ata_timing_compute(struct ata_device *, unsigned short,
-			      struct ata_timing *, int, int);
-extern void ata_timing_merge(const struct ata_timing *,
-			     const struct ata_timing *, struct ata_timing *,
-			     unsigned int);
 extern u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle);
 
 /* PCI */
@@ -1807,6 +1801,16 @@ static inline int ata_dma_enabled(struct ata_device *adev)
 	return (adev->dma_mode == 0xFF ? 0 : 1);
 }
 
+/**************************************************************************
+ * PATA timings - drivers/ata/libata-pata-timings.c
+ */
+extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
+extern int ata_timing_compute(struct ata_device *, unsigned short,
+			      struct ata_timing *, int, int);
+extern void ata_timing_merge(const struct ata_timing *,
+			     const struct ata_timing *, struct ata_timing *,
+			     unsigned int);
+
 /**************************************************************************
  * PMP - drivers/ata/libata-pmp.c
  */
-- 
2.24.1

[PATCH v5 13/27] ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled()

[Bartlomiej Zolnierkiewicz]

When CONFIG_SATA_HOST=n there are no NCQ capable host drivers
built so it is safe to hardwire ata_ncq_enabled() to always
return zero.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  37820     572      40   38432    9620 drivers/ata/libata-core.o
  21040     105     576   21721    54d9 drivers/ata/libata-scsi.o
  17405      18       0   17423    440f drivers/ata/libata-eh.o
after:
  37582     572      40   38194    9532 drivers/ata/libata-core.o
  20702     105     576   21383    5387 drivers/ata/libata-scsi.o
  17353      18       0   17371    43db drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 include/linux/libata.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/libata.h b/include/linux/libata.h
index 500b709ed3de..661d76038684 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1633,6 +1633,8 @@ extern struct ata_device *ata_dev_next(struct ata_device *dev,
  */
 static inline int ata_ncq_enabled(struct ata_device *dev)
 {
+	if (!IS_ENABLED(CONFIG_SATA_HOST))
+		return 0;
 	return (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
 			      ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
 }
-- 
2.24.1

[PATCH v5 14/27] ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts

[Bartlomiej Zolnierkiewicz]

Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_dev_config_ncq() to allow
compiler to optimize out the function for non-SATA configs.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  37582     572      40   38194    9532 drivers/ata/libata-core.o
after:
  36462     572      40   37074    90d2 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0a56968e2e98..dcdb7fb46dbd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2287,6 +2287,8 @@ static int ata_dev_config_ncq(struct ata_device *dev,
 		desc[0] = '\0';
 		return 0;
 	}
+	if (!IS_ENABLED(CONFIG_SATA_HOST))
+		return 0;
 	if (dev->horkage & ATA_HORKAGE_NONCQ) {
 		snprintf(desc, desc_sz, "NCQ (not used)");
 		return 0;
-- 
2.24.1

[PATCH v5 15/27] ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts

[Bartlomiej Zolnierkiewicz]

Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_eh_set_lpm() to allow
compiler to optimize out the function for non-SATA configs (for
PATA hosts "ap && !ap->ops->set_lpm" condition is always true so
it's sufficient for the function to return zero).

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  17353      18       0   17371    43db drivers/ata/libata-eh.o
after:
  16607      18       0   16625    40f1 drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-eh.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 04275f4c8d36..8dc33b6832f0 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3443,7 +3443,8 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 	int rc;
 
 	/* if the link or host doesn't do LPM, noop */
-	if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
+	if (!IS_ENABLED(CONFIG_SATA_HOST) ||
+	    (link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
 		return 0;
 
 	/*
-- 
2.24.1

[PATCH v5 16/27] ata: start separating SATA specific code from libata-core.c

[Bartlomiej Zolnierkiewicz]

Start separating SATA specific code from libata-core.c:

* move following functions to libata-sata.c:
  - ata_tf_to_fis()
  - ata_tf_from_fis()
  - sata_link_scr_lpm()
  - ata_slave_link_init()
  - sata_lpm_ignore_phy_events()

* group above functions together in <linux/libata.h>

* include libata-sata.c in the build when CONFIG_SATA_HOST=y

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  37582     572      40   38194    9532 drivers/ata/libata-core.o
after:
  36762     572      40   37374    91fe drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Makefile      |   1 +
 drivers/ata/libata-core.c | 245 ------------------------------------
 drivers/ata/libata-sata.c | 258 ++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h    |  16 ++-
 4 files changed, 269 insertions(+), 251 deletions(-)
 create mode 100644 drivers/ata/libata-sata.c

diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index cdaf965fed25..b8aebfb14e82 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_PATA_LEGACY)	+= pata_legacy.o
 
 libata-y	:= libata-core.o libata-scsi.o libata-eh.o \
 	libata-transport.o libata-trace.o
+libata-$(CONFIG_SATA_HOST)	+= libata-sata.o
 libata-$(CONFIG_ATA_SFF)	+= libata-sff.o
 libata-$(CONFIG_SATA_PMP)	+= libata-pmp.o
 libata-$(CONFIG_ATA_ACPI)	+= libata-acpi.o
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index dcdb7fb46dbd..b4a952dce7ab 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -531,81 +531,6 @@ int atapi_cmd_type(u8 opcode)
 }
 EXPORT_SYMBOL_GPL(atapi_cmd_type);
 
-/**
- *	ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
- *	@tf: Taskfile to convert
- *	@pmp: Port multiplier port
- *	@is_cmd: This FIS is for command
- *	@fis: Buffer into which data will output
- *
- *	Converts a standard ATA taskfile to a Serial ATA
- *	FIS structure (Register - Host to Device).
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis)
-{
-	fis[0] = 0x27;			/* Register - Host to Device FIS */
-	fis[1] = pmp & 0xf;		/* Port multiplier number*/
-	if (is_cmd)
-		fis[1] |= (1 << 7);	/* bit 7 indicates Command FIS */
-
-	fis[2] = tf->command;
-	fis[3] = tf->feature;
-
-	fis[4] = tf->lbal;
-	fis[5] = tf->lbam;
-	fis[6] = tf->lbah;
-	fis[7] = tf->device;
-
-	fis[8] = tf->hob_lbal;
-	fis[9] = tf->hob_lbam;
-	fis[10] = tf->hob_lbah;
-	fis[11] = tf->hob_feature;
-
-	fis[12] = tf->nsect;
-	fis[13] = tf->hob_nsect;
-	fis[14] = 0;
-	fis[15] = tf->ctl;
-
-	fis[16] = tf->auxiliary & 0xff;
-	fis[17] = (tf->auxiliary >> 8) & 0xff;
-	fis[18] = (tf->auxiliary >> 16) & 0xff;
-	fis[19] = (tf->auxiliary >> 24) & 0xff;
-}
-EXPORT_SYMBOL_GPL(ata_tf_to_fis);
-
-/**
- *	ata_tf_from_fis - Convert SATA FIS to ATA taskfile
- *	@fis: Buffer from which data will be input
- *	@tf: Taskfile to output
- *
- *	Converts a serial ATA FIS structure to a standard ATA taskfile.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-
-void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
-{
-	tf->command	= fis[2];	/* status */
-	tf->feature	= fis[3];	/* error */
-
-	tf->lbal	= fis[4];
-	tf->lbam	= fis[5];
-	tf->lbah	= fis[6];
-	tf->device	= fis[7];
-
-	tf->hob_lbal	= fis[8];
-	tf->hob_lbam	= fis[9];
-	tf->hob_lbah	= fis[10];
-
-	tf->nsect	= fis[12];
-	tf->hob_nsect	= fis[13];
-}
-EXPORT_SYMBOL_GPL(ata_tf_from_fis);
-
 static const u8 ata_rw_cmds[] = {
 	/* pio multi */
 	ATA_CMD_READ_MULTI,
@@ -3779,81 +3704,6 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
 }
 EXPORT_SYMBOL_GPL(sata_link_resume);
 
-/**
- *	sata_link_scr_lpm - manipulate SControl IPM and SPM fields
- *	@link: ATA link to manipulate SControl for
- *	@policy: LPM policy to configure
- *	@spm_wakeup: initiate LPM transition to active state
- *
- *	Manipulate the IPM field of the SControl register of @link
- *	according to @policy.  If @policy is ATA_LPM_MAX_POWER and
- *	@spm_wakeup is %true, the SPM field is manipulated to wake up
- *	the link.  This function also clears PHYRDY_CHG before
- *	returning.
- *
- *	LOCKING:
- *	EH context.
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
-		      bool spm_wakeup)
-{
-	struct ata_eh_context *ehc = &link->eh_context;
-	bool woken_up = false;
-	u32 scontrol;
-	int rc;
-
-	rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
-	if (rc)
-		return rc;
-
-	switch (policy) {
-	case ATA_LPM_MAX_POWER:
-		/* disable all LPM transitions */
-		scontrol |= (0x7 << 8);
-		/* initiate transition to active state */
-		if (spm_wakeup) {
-			scontrol |= (0x4 << 12);
-			woken_up = true;
-		}
-		break;
-	case ATA_LPM_MED_POWER:
-		/* allow LPM to PARTIAL */
-		scontrol &= ~(0x1 << 8);
-		scontrol |= (0x6 << 8);
-		break;
-	case ATA_LPM_MED_POWER_WITH_DIPM:
-	case ATA_LPM_MIN_POWER_WITH_PARTIAL:
-	case ATA_LPM_MIN_POWER:
-		if (ata_link_nr_enabled(link) > 0)
-			/* no restrictions on LPM transitions */
-			scontrol &= ~(0x7 << 8);
-		else {
-			/* empty port, power off */
-			scontrol &= ~0xf;
-			scontrol |= (0x1 << 2);
-		}
-		break;
-	default:
-		WARN_ON(1);
-	}
-
-	rc = sata_scr_write(link, SCR_CONTROL, scontrol);
-	if (rc)
-		return rc;
-
-	/* give the link time to transit out of LPM state */
-	if (woken_up)
-		msleep(10);
-
-	/* clear PHYRDY_CHG from SError */
-	ehc->i.serror &= ~SERR_PHYRDY_CHG;
-	return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
-}
-EXPORT_SYMBOL_GPL(sata_link_scr_lpm);
-
 /**
  *	ata_std_prereset - prepare for reset
  *	@link: ATA link to be reset
@@ -6118,69 +5968,6 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
 
-/**
- *	ata_slave_link_init - initialize slave link
- *	@ap: port to initialize slave link for
- *
- *	Create and initialize slave link for @ap.  This enables slave
- *	link handling on the port.
- *
- *	In libata, a port contains links and a link contains devices.
- *	There is single host link but if a PMP is attached to it,
- *	there can be multiple fan-out links.  On SATA, there's usually
- *	a single device connected to a link but PATA and SATA
- *	controllers emulating TF based interface can have two - master
- *	and slave.
- *
- *	However, there are a few controllers which don't fit into this
- *	abstraction too well - SATA controllers which emulate TF
- *	interface with both master and slave devices but also have
- *	separate SCR register sets for each device.  These controllers
- *	need separate links for physical link handling
- *	(e.g. onlineness, link speed) but should be treated like a
- *	traditional M/S controller for everything else (e.g. command
- *	issue, softreset).
- *
- *	slave_link is libata's way of handling this class of
- *	controllers without impacting core layer too much.  For
- *	anything other than physical link handling, the default host
- *	link is used for both master and slave.  For physical link
- *	handling, separate @ap->slave_link is used.  All dirty details
- *	are implemented inside libata core layer.  From LLD's POV, the
- *	only difference is that prereset, hardreset and postreset are
- *	called once more for the slave link, so the reset sequence
- *	looks like the following.
- *
- *	prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) ->
- *	softreset(M) -> postreset(M) -> postreset(S)
- *
- *	Note that softreset is called only for the master.  Softreset
- *	resets both M/S by definition, so SRST on master should handle
- *	both (the standard method will work just fine).
- *
- *	LOCKING:
- *	Should be called before host is registered.
- *
- *	RETURNS:
- *	0 on success, -errno on failure.
- */
-int ata_slave_link_init(struct ata_port *ap)
-{
-	struct ata_link *link;
-
-	WARN_ON(ap->slave_link);
-	WARN_ON(ap->flags & ATA_FLAG_PMP);
-
-	link = kzalloc(sizeof(*link), GFP_KERNEL);
-	if (!link)
-		return -ENOMEM;
-
-	ata_link_init(ap, link, 1);
-	ap->slave_link = link;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ata_slave_link_init);
-
 static void ata_host_stop(struct device *gendev, void *res)
 {
 	struct ata_host *host = dev_get_drvdata(gendev);
@@ -7106,38 +6893,6 @@ u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val,
 }
 EXPORT_SYMBOL_GPL(ata_wait_register);
 
-/**
- *	sata_lpm_ignore_phy_events - test if PHY event should be ignored
- *	@link: Link receiving the event
- *
- *	Test whether the received PHY event has to be ignored or not.
- *
- *	LOCKING:
- *	None:
- *
- *	RETURNS:
- *	True if the event has to be ignored.
- */
-bool sata_lpm_ignore_phy_events(struct ata_link *link)
-{
-	unsigned long lpm_timeout = link->last_lpm_change +
-				    msecs_to_jiffies(ATA_TMOUT_SPURIOUS_PHY);
-
-	/* if LPM is enabled, PHYRDY doesn't mean anything */
-	if (link->lpm_policy > ATA_LPM_MAX_POWER)
-		return true;
-
-	/* ignore the first PHY event after the LPM policy changed
-	 * as it is might be spurious
-	 */
-	if ((link->flags & ATA_LFLAG_CHANGED) &&
-	    time_before(jiffies, lpm_timeout))
-		return true;
-
-	return false;
-}
-EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events);
-
 /*
  * Dummy port_ops
  */
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
new file mode 100644
index 000000000000..04f1ecaf414c
--- /dev/null
+++ b/drivers/ata/libata-sata.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  SATA specific part of ATA helper library
+ *
+ *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
+ *  Copyright 2003-2004 Jeff Garzik
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+
+#include "libata.h"
+
+/**
+ *	ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
+ *	@tf: Taskfile to convert
+ *	@pmp: Port multiplier port
+ *	@is_cmd: This FIS is for command
+ *	@fis: Buffer into which data will output
+ *
+ *	Converts a standard ATA taskfile to a Serial ATA
+ *	FIS structure (Register - Host to Device).
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis)
+{
+	fis[0] = 0x27;			/* Register - Host to Device FIS */
+	fis[1] = pmp & 0xf;		/* Port multiplier number*/
+	if (is_cmd)
+		fis[1] |= (1 << 7);	/* bit 7 indicates Command FIS */
+
+	fis[2] = tf->command;
+	fis[3] = tf->feature;
+
+	fis[4] = tf->lbal;
+	fis[5] = tf->lbam;
+	fis[6] = tf->lbah;
+	fis[7] = tf->device;
+
+	fis[8] = tf->hob_lbal;
+	fis[9] = tf->hob_lbam;
+	fis[10] = tf->hob_lbah;
+	fis[11] = tf->hob_feature;
+
+	fis[12] = tf->nsect;
+	fis[13] = tf->hob_nsect;
+	fis[14] = 0;
+	fis[15] = tf->ctl;
+
+	fis[16] = tf->auxiliary & 0xff;
+	fis[17] = (tf->auxiliary >> 8) & 0xff;
+	fis[18] = (tf->auxiliary >> 16) & 0xff;
+	fis[19] = (tf->auxiliary >> 24) & 0xff;
+}
+EXPORT_SYMBOL_GPL(ata_tf_to_fis);
+
+/**
+ *	ata_tf_from_fis - Convert SATA FIS to ATA taskfile
+ *	@fis: Buffer from which data will be input
+ *	@tf: Taskfile to output
+ *
+ *	Converts a serial ATA FIS structure to a standard ATA taskfile.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
+void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
+{
+	tf->command	= fis[2];	/* status */
+	tf->feature	= fis[3];	/* error */
+
+	tf->lbal	= fis[4];
+	tf->lbam	= fis[5];
+	tf->lbah	= fis[6];
+	tf->device	= fis[7];
+
+	tf->hob_lbal	= fis[8];
+	tf->hob_lbam	= fis[9];
+	tf->hob_lbah	= fis[10];
+
+	tf->nsect	= fis[12];
+	tf->hob_nsect	= fis[13];
+}
+EXPORT_SYMBOL_GPL(ata_tf_from_fis);
+
+/**
+ *	sata_link_scr_lpm - manipulate SControl IPM and SPM fields
+ *	@link: ATA link to manipulate SControl for
+ *	@policy: LPM policy to configure
+ *	@spm_wakeup: initiate LPM transition to active state
+ *
+ *	Manipulate the IPM field of the SControl register of @link
+ *	according to @policy.  If @policy is ATA_LPM_MAX_POWER and
+ *	@spm_wakeup is %true, the SPM field is manipulated to wake up
+ *	the link.  This function also clears PHYRDY_CHG before
+ *	returning.
+ *
+ *	LOCKING:
+ *	EH context.
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+		      bool spm_wakeup)
+{
+	struct ata_eh_context *ehc = &link->eh_context;
+	bool woken_up = false;
+	u32 scontrol;
+	int rc;
+
+	rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+	if (rc)
+		return rc;
+
+	switch (policy) {
+	case ATA_LPM_MAX_POWER:
+		/* disable all LPM transitions */
+		scontrol |= (0x7 << 8);
+		/* initiate transition to active state */
+		if (spm_wakeup) {
+			scontrol |= (0x4 << 12);
+			woken_up = true;
+		}
+		break;
+	case ATA_LPM_MED_POWER:
+		/* allow LPM to PARTIAL */
+		scontrol &= ~(0x1 << 8);
+		scontrol |= (0x6 << 8);
+		break;
+	case ATA_LPM_MED_POWER_WITH_DIPM:
+	case ATA_LPM_MIN_POWER_WITH_PARTIAL:
+	case ATA_LPM_MIN_POWER:
+		if (ata_link_nr_enabled(link) > 0)
+			/* no restrictions on LPM transitions */
+			scontrol &= ~(0x7 << 8);
+		else {
+			/* empty port, power off */
+			scontrol &= ~0xf;
+			scontrol |= (0x1 << 2);
+		}
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	rc = sata_scr_write(link, SCR_CONTROL, scontrol);
+	if (rc)
+		return rc;
+
+	/* give the link time to transit out of LPM state */
+	if (woken_up)
+		msleep(10);
+
+	/* clear PHYRDY_CHG from SError */
+	ehc->i.serror &= ~SERR_PHYRDY_CHG;
+	return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
+}
+EXPORT_SYMBOL_GPL(sata_link_scr_lpm);
+
+/**
+ *	ata_slave_link_init - initialize slave link
+ *	@ap: port to initialize slave link for
+ *
+ *	Create and initialize slave link for @ap.  This enables slave
+ *	link handling on the port.
+ *
+ *	In libata, a port contains links and a link contains devices.
+ *	There is single host link but if a PMP is attached to it,
+ *	there can be multiple fan-out links.  On SATA, there's usually
+ *	a single device connected to a link but PATA and SATA
+ *	controllers emulating TF based interface can have two - master
+ *	and slave.
+ *
+ *	However, there are a few controllers which don't fit into this
+ *	abstraction too well - SATA controllers which emulate TF
+ *	interface with both master and slave devices but also have
+ *	separate SCR register sets for each device.  These controllers
+ *	need separate links for physical link handling
+ *	(e.g. onlineness, link speed) but should be treated like a
+ *	traditional M/S controller for everything else (e.g. command
+ *	issue, softreset).
+ *
+ *	slave_link is libata's way of handling this class of
+ *	controllers without impacting core layer too much.  For
+ *	anything other than physical link handling, the default host
+ *	link is used for both master and slave.  For physical link
+ *	handling, separate @ap->slave_link is used.  All dirty details
+ *	are implemented inside libata core layer.  From LLD's POV, the
+ *	only difference is that prereset, hardreset and postreset are
+ *	called once more for the slave link, so the reset sequence
+ *	looks like the following.
+ *
+ *	prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) ->
+ *	softreset(M) -> postreset(M) -> postreset(S)
+ *
+ *	Note that softreset is called only for the master.  Softreset
+ *	resets both M/S by definition, so SRST on master should handle
+ *	both (the standard method will work just fine).
+ *
+ *	LOCKING:
+ *	Should be called before host is registered.
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+int ata_slave_link_init(struct ata_port *ap)
+{
+	struct ata_link *link;
+
+	WARN_ON(ap->slave_link);
+	WARN_ON(ap->flags & ATA_FLAG_PMP);
+
+	link = kzalloc(sizeof(*link), GFP_KERNEL);
+	if (!link)
+		return -ENOMEM;
+
+	ata_link_init(ap, link, 1);
+	ap->slave_link = link;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_slave_link_init);
+
+/**
+ *	sata_lpm_ignore_phy_events - test if PHY event should be ignored
+ *	@link: Link receiving the event
+ *
+ *	Test whether the received PHY event has to be ignored or not.
+ *
+ *	LOCKING:
+ *	None:
+ *
+ *	RETURNS:
+ *	True if the event has to be ignored.
+ */
+bool sata_lpm_ignore_phy_events(struct ata_link *link)
+{
+	unsigned long lpm_timeout = link->last_lpm_change +
+				    msecs_to_jiffies(ATA_TMOUT_SPURIOUS_PHY);
+
+	/* if LPM is enabled, PHYRDY doesn't mean anything */
+	if (link->lpm_policy > ATA_LPM_MAX_POWER)
+		return true;
+
+	/* ignore the first PHY event after the LPM policy changed
+	 * as it is might be spurious
+	 */
+	if ((link->flags & ATA_LFLAG_CHANGED) &&
+	    time_before(jiffies, lpm_timeout))
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 661d76038684..b419d7412f71 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1082,8 +1082,6 @@ extern int sata_link_debounce(struct ata_link *link,
 			const unsigned long *params, unsigned long deadline);
 extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
 			    unsigned long deadline);
-extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
-			     bool spm_wakeup);
 extern int sata_link_hardreset(struct ata_link *link,
 			const unsigned long *timing, unsigned long deadline,
 			bool *online, int (*check_ready)(struct ata_link *));
@@ -1094,7 +1092,6 @@ extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);
 extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
 extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
 			const struct ata_port_info * const * ppi, int n_ports);
-extern int ata_slave_link_init(struct ata_port *ap);
 extern void ata_host_get(struct ata_host *host);
 extern void ata_host_put(struct ata_host *host);
 extern int ata_host_start(struct ata_host *host);
@@ -1152,9 +1149,6 @@ extern void ata_msleep(struct ata_port *ap, unsigned int msecs);
 extern u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask,
 			u32 val, unsigned long interval, unsigned long timeout);
 extern int atapi_cmd_type(u8 opcode);
-extern void ata_tf_to_fis(const struct ata_taskfile *tf,
-			  u8 pmp, int is_cmd, u8 *fis);
-extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
 extern unsigned long ata_pack_xfermask(unsigned long pio_mask,
 			unsigned long mwdma_mask, unsigned long udma_mask);
 extern void ata_unpack_xfermask(unsigned long xfer_mask,
@@ -1195,6 +1189,16 @@ extern struct ata_device *ata_dev_pair(struct ata_device *adev);
 extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
 extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
 extern void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, struct list_head *eh_q);
+
+/*
+ * SATA specific code - drivers/ata/libata-sata.c
+ */
+extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+			     bool spm_wakeup);
+extern int ata_slave_link_init(struct ata_port *ap);
+extern void ata_tf_to_fis(const struct ata_taskfile *tf,
+			  u8 pmp, int is_cmd, u8 *fis);
+extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
 extern bool sata_lpm_ignore_phy_events(struct ata_link *link);
 
 extern int ata_cable_40wire(struct ata_port *ap);
-- 
2.24.1

[PATCH v5 17/27] ata: move sata_scr_*() to libata-sata.c

[Bartlomiej Zolnierkiewicz]

* move sata_scr_*() to libata-sata.c

* add static inlines for CONFIG_SATA_HOST=n case

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  35642     572      40   36254    8d9e drivers/ata/libata-core.o
  16607      18       0   16625    40f1 drivers/ata/libata-eh.o
after:
  32846     572      40   33458    82b2 drivers/ata/libata-core.o
  16243      18       0   16261    3f85 drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 109 --------------------------------------
 drivers/ata/libata-sata.c | 109 ++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h    |  24 +++++++--
 3 files changed, 129 insertions(+), 113 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b4a952dce7ab..ba1e5c4d3c09 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5215,115 +5215,6 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
 	ata_qc_complete(qc);
 }
 
-/**
- *	sata_scr_valid - test whether SCRs are accessible
- *	@link: ATA link to test SCR accessibility for
- *
- *	Test whether SCRs are accessible for @link.
- *
- *	LOCKING:
- *	None.
- *
- *	RETURNS:
- *	1 if SCRs are accessible, 0 otherwise.
- */
-int sata_scr_valid(struct ata_link *link)
-{
-	struct ata_port *ap = link->ap;
-
-	return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read;
-}
-EXPORT_SYMBOL_GPL(sata_scr_valid);
-
-/**
- *	sata_scr_read - read SCR register of the specified port
- *	@link: ATA link to read SCR for
- *	@reg: SCR to read
- *	@val: Place to store read value
- *
- *	Read SCR register @reg of @link into *@val.  This function is
- *	guaranteed to succeed if @link is ap->link, the cable type of
- *	the port is SATA and the port implements ->scr_read.
- *
- *	LOCKING:
- *	None if @link is ap->link.  Kernel thread context otherwise.
- *
- *	RETURNS:
- *	0 on success, negative errno on failure.
- */
-int sata_scr_read(struct ata_link *link, int reg, u32 *val)
-{
-	if (ata_is_host_link(link)) {
-		if (sata_scr_valid(link))
-			return link->ap->ops->scr_read(link, reg, val);
-		return -EOPNOTSUPP;
-	}
-
-	return sata_pmp_scr_read(link, reg, val);
-}
-EXPORT_SYMBOL_GPL(sata_scr_read);
-
-/**
- *	sata_scr_write - write SCR register of the specified port
- *	@link: ATA link to write SCR for
- *	@reg: SCR to write
- *	@val: value to write
- *
- *	Write @val to SCR register @reg of @link.  This function is
- *	guaranteed to succeed if @link is ap->link, the cable type of
- *	the port is SATA and the port implements ->scr_read.
- *
- *	LOCKING:
- *	None if @link is ap->link.  Kernel thread context otherwise.
- *
- *	RETURNS:
- *	0 on success, negative errno on failure.
- */
-int sata_scr_write(struct ata_link *link, int reg, u32 val)
-{
-	if (ata_is_host_link(link)) {
-		if (sata_scr_valid(link))
-			return link->ap->ops->scr_write(link, reg, val);
-		return -EOPNOTSUPP;
-	}
-
-	return sata_pmp_scr_write(link, reg, val);
-}
-EXPORT_SYMBOL_GPL(sata_scr_write);
-
-/**
- *	sata_scr_write_flush - write SCR register of the specified port and flush
- *	@link: ATA link to write SCR for
- *	@reg: SCR to write
- *	@val: value to write
- *
- *	This function is identical to sata_scr_write() except that this
- *	function performs flush after writing to the register.
- *
- *	LOCKING:
- *	None if @link is ap->link.  Kernel thread context otherwise.
- *
- *	RETURNS:
- *	0 on success, negative errno on failure.
- */
-int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
-{
-	if (ata_is_host_link(link)) {
-		int rc;
-
-		if (sata_scr_valid(link)) {
-			rc = link->ap->ops->scr_write(link, reg, val);
-			if (rc == 0)
-				rc = link->ap->ops->scr_read(link, reg, &val);
-			return rc;
-		}
-		return -EOPNOTSUPP;
-	}
-
-	return sata_pmp_scr_write(link, reg, val);
-}
-EXPORT_SYMBOL_GPL(sata_scr_write_flush);
-
 /**
  *	ata_phys_link_online - test whether the given link is online
  *	@link: ATA link to test
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 04f1ecaf414c..1ef4c19864ac 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -12,6 +12,115 @@
 
 #include "libata.h"
 
+/**
+ *	sata_scr_valid - test whether SCRs are accessible
+ *	@link: ATA link to test SCR accessibility for
+ *
+ *	Test whether SCRs are accessible for @link.
+ *
+ *	LOCKING:
+ *	None.
+ *
+ *	RETURNS:
+ *	1 if SCRs are accessible, 0 otherwise.
+ */
+int sata_scr_valid(struct ata_link *link)
+{
+	struct ata_port *ap = link->ap;
+
+	return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read;
+}
+EXPORT_SYMBOL_GPL(sata_scr_valid);
+
+/**
+ *	sata_scr_read - read SCR register of the specified port
+ *	@link: ATA link to read SCR for
+ *	@reg: SCR to read
+ *	@val: Place to store read value
+ *
+ *	Read SCR register @reg of @link into *@val.  This function is
+ *	guaranteed to succeed if @link is ap->link, the cable type of
+ *	the port is SATA and the port implements ->scr_read.
+ *
+ *	LOCKING:
+ *	None if @link is ap->link.  Kernel thread context otherwise.
+ *
+ *	RETURNS:
+ *	0 on success, negative errno on failure.
+ */
+int sata_scr_read(struct ata_link *link, int reg, u32 *val)
+{
+	if (ata_is_host_link(link)) {
+		if (sata_scr_valid(link))
+			return link->ap->ops->scr_read(link, reg, val);
+		return -EOPNOTSUPP;
+	}
+
+	return sata_pmp_scr_read(link, reg, val);
+}
+EXPORT_SYMBOL_GPL(sata_scr_read);
+
+/**
+ *	sata_scr_write - write SCR register of the specified port
+ *	@link: ATA link to write SCR for
+ *	@reg: SCR to write
+ *	@val: value to write
+ *
+ *	Write @val to SCR register @reg of @link.  This function is
+ *	guaranteed to succeed if @link is ap->link, the cable type of
+ *	the port is SATA and the port implements ->scr_read.
+ *
+ *	LOCKING:
+ *	None if @link is ap->link.  Kernel thread context otherwise.
+ *
+ *	RETURNS:
+ *	0 on success, negative errno on failure.
+ */
+int sata_scr_write(struct ata_link *link, int reg, u32 val)
+{
+	if (ata_is_host_link(link)) {
+		if (sata_scr_valid(link))
+			return link->ap->ops->scr_write(link, reg, val);
+		return -EOPNOTSUPP;
+	}
+
+	return sata_pmp_scr_write(link, reg, val);
+}
+EXPORT_SYMBOL_GPL(sata_scr_write);
+
+/**
+ *	sata_scr_write_flush - write SCR register of the specified port and flush
+ *	@link: ATA link to write SCR for
+ *	@reg: SCR to write
+ *	@val: value to write
+ *
+ *	This function is identical to sata_scr_write() except that this
+ *	function performs flush after writing to the register.
+ *
+ *	LOCKING:
+ *	None if @link is ap->link.  Kernel thread context otherwise.
+ *
+ *	RETURNS:
+ *	0 on success, negative errno on failure.
+ */
+int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
+{
+	if (ata_is_host_link(link)) {
+		int rc;
+
+		if (sata_scr_valid(link)) {
+			rc = link->ap->ops->scr_write(link, reg, val);
+			if (rc == 0)
+				rc = link->ap->ops->scr_read(link, reg, &val);
+			return rc;
+		}
+		return -EOPNOTSUPP;
+	}
+
+	return sata_pmp_scr_write(link, reg, val);
+}
+EXPORT_SYMBOL_GPL(sata_scr_write_flush);
+
 /**
  *	ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
  *	@tf: Taskfile to convert
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b419d7412f71..86703ce5a33e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1125,10 +1125,6 @@ extern void ata_sas_tport_delete(struct ata_port *ap);
 extern void ata_sas_port_stop(struct ata_port *ap);
 extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
 extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
-extern int sata_scr_valid(struct ata_link *link);
-extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
-extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
-extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
 extern bool ata_link_online(struct ata_link *link);
 extern bool ata_link_offline(struct ata_link *link);
 #ifdef CONFIG_PM
@@ -1193,6 +1189,26 @@ extern void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *
 /*
  * SATA specific code - drivers/ata/libata-sata.c
  */
+#ifdef CONFIG_SATA_HOST
+extern int sata_scr_valid(struct ata_link *link);
+extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
+extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
+extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
+#else
+static inline int sata_scr_valid(struct ata_link *link) { return 0; }
+static inline int sata_scr_read(struct ata_link *link, int reg, u32 *val)
+{
+	return -EOPNOTSUPP;
+}
+static inline int sata_scr_write(struct ata_link *link, int reg, u32 val)
+{
+	return -EOPNOTSUPP;
+}
+static inline int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
+{
+	return -EOPNOTSUPP;
+}
+#endif
 extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 			     bool spm_wakeup);
 extern int ata_slave_link_init(struct ata_port *ap);
-- 
2.24.1

[PATCH v5 18/27] ata: move *sata_set_spd*() to libata-sata.c

[Bartlomiej Zolnierkiewicz]

* move *sata_set_spd*() to libata-sata.c

* add static inlines for CONFIG_SATA_HOST=n case

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32842     572      40   33458    82ae drivers/ata/libata-core.o
after:
  32812     572      40   33428    8290 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 81 ---------------------------------------
 drivers/ata/libata-sata.c | 81 +++++++++++++++++++++++++++++++++++++++
 drivers/ata/libata.h      |  7 ++++
 include/linux/libata.h    |  3 +-
 4 files changed, 90 insertions(+), 82 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ba1e5c4d3c09..13214ebd0e5c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3050,87 +3050,6 @@ int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
 	return 0;
 }
 
-static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
-{
-	struct ata_link *host_link = &link->ap->link;
-	u32 limit, target, spd;
-
-	limit = link->sata_spd_limit;
-
-	/* Don't configure downstream link faster than upstream link.
-	 * It doesn't speed up anything and some PMPs choke on such
-	 * configuration.
-	 */
-	if (!ata_is_host_link(link) && host_link->sata_spd)
-		limit &= (1 << host_link->sata_spd) - 1;
-
-	if (limit == UINT_MAX)
-		target = 0;
-	else
-		target = fls(limit);
-
-	spd = (*scontrol >> 4) & 0xf;
-	*scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
-
-	return spd != target;
-}
-
-/**
- *	sata_set_spd_needed - is SATA spd configuration needed
- *	@link: Link in question
- *
- *	Test whether the spd limit in SControl matches
- *	@link->sata_spd_limit.  This function is used to determine
- *	whether hardreset is necessary to apply SATA spd
- *	configuration.
- *
- *	LOCKING:
- *	Inherited from caller.
- *
- *	RETURNS:
- *	1 if SATA spd configuration is needed, 0 otherwise.
- */
-static int sata_set_spd_needed(struct ata_link *link)
-{
-	u32 scontrol;
-
-	if (sata_scr_read(link, SCR_CONTROL, &scontrol))
-		return 1;
-
-	return __sata_set_spd_needed(link, &scontrol);
-}
-
-/**
- *	sata_set_spd - set SATA spd according to spd limit
- *	@link: Link to set SATA spd for
- *
- *	Set SATA spd of @link according to sata_spd_limit.
- *
- *	LOCKING:
- *	Inherited from caller.
- *
- *	RETURNS:
- *	0 if spd doesn't need to be changed, 1 if spd has been
- *	changed.  Negative errno if SCR registers are inaccessible.
- */
-int sata_set_spd(struct ata_link *link)
-{
-	u32 scontrol;
-	int rc;
-
-	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
-		return rc;
-
-	if (!__sata_set_spd_needed(link, &scontrol))
-		return 0;
-
-	if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
-		return rc;
-
-	return 1;
-}
-EXPORT_SYMBOL_GPL(sata_set_spd);
-
 #ifdef CONFIG_ATA_ACPI
 /**
  *	ata_timing_cycle2mode - find xfer mode for the specified cycle duration
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 1ef4c19864ac..d66afdc33d54 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -271,6 +271,87 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 }
 EXPORT_SYMBOL_GPL(sata_link_scr_lpm);
 
+static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
+{
+	struct ata_link *host_link = &link->ap->link;
+	u32 limit, target, spd;
+
+	limit = link->sata_spd_limit;
+
+	/* Don't configure downstream link faster than upstream link.
+	 * It doesn't speed up anything and some PMPs choke on such
+	 * configuration.
+	 */
+	if (!ata_is_host_link(link) && host_link->sata_spd)
+		limit &= (1 << host_link->sata_spd) - 1;
+
+	if (limit == UINT_MAX)
+		target = 0;
+	else
+		target = fls(limit);
+
+	spd = (*scontrol >> 4) & 0xf;
+	*scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
+
+	return spd != target;
+}
+
+/**
+ *	sata_set_spd_needed - is SATA spd configuration needed
+ *	@link: Link in question
+ *
+ *	Test whether the spd limit in SControl matches
+ *	@link->sata_spd_limit.  This function is used to determine
+ *	whether hardreset is necessary to apply SATA spd
+ *	configuration.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ *
+ *	RETURNS:
+ *	1 if SATA spd configuration is needed, 0 otherwise.
+ */
+int sata_set_spd_needed(struct ata_link *link)
+{
+	u32 scontrol;
+
+	if (sata_scr_read(link, SCR_CONTROL, &scontrol))
+		return 1;
+
+	return __sata_set_spd_needed(link, &scontrol);
+}
+
+/**
+ *	sata_set_spd - set SATA spd according to spd limit
+ *	@link: Link to set SATA spd for
+ *
+ *	Set SATA spd of @link according to sata_spd_limit.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ *
+ *	RETURNS:
+ *	0 if spd doesn't need to be changed, 1 if spd has been
+ *	changed.  Negative errno if SCR registers are inaccessible.
+ */
+int sata_set_spd(struct ata_link *link)
+{
+	u32 scontrol;
+	int rc;
+
+	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+		return rc;
+
+	if (!__sata_set_spd_needed(link, &scontrol))
+		return 0;
+
+	if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+		return rc;
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(sata_set_spd);
+
 /**
  *	ata_slave_link_init - initialize slave link
  *	@ap: port to initialize slave link for
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index cd8090ad43e5..53b45ebe3d55 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -87,6 +87,13 @@ extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
 
 #define to_ata_port(d) container_of(d, struct ata_port, tdev)
 
+/* libata-sata.c */
+#ifdef CONFIG_SATA_HOST
+int sata_set_spd_needed(struct ata_link *link);
+#else
+static inline int sata_set_spd_needed(struct ata_link *link) { return 1; }
+#endif
+
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
 extern unsigned int ata_acpi_gtf_filter;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 86703ce5a33e..f0817a8f1e3f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1074,7 +1074,6 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
 	return ap->ops == &ata_dummy_port_ops;
 }
 
-extern int sata_set_spd(struct ata_link *link);
 extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
 extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
 				int (*check_ready)(struct ata_link *link));
@@ -1194,6 +1193,7 @@ extern int sata_scr_valid(struct ata_link *link);
 extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
 extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
 extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
+extern int sata_set_spd(struct ata_link *link);
 #else
 static inline int sata_scr_valid(struct ata_link *link) { return 0; }
 static inline int sata_scr_read(struct ata_link *link, int reg, u32 *val)
@@ -1208,6 +1208,7 @@ static inline int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
 {
 	return -EOPNOTSUPP;
 }
+static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; }
 #endif
 extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 			     bool spm_wakeup);
-- 
2.24.1

[PATCH v5 19/27] ata: move sata_link_{debounce,resume}() to libata-sata.c

[Bartlomiej Zolnierkiewicz]

* move sata_link_{debounce,resume}() to libata-sata.c

* add static inline for CONFIG_SATA_HOST=n case (only one,
  for sata_link_resume() is needed)

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32816     572      40   33428    8294 drivers/ata/libata-core.o
after:
  32724     572      40   33336    8238 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 138 --------------------------------------
 drivers/ata/libata-sata.c | 138 ++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h    |  14 ++--
 3 files changed, 148 insertions(+), 142 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 13214ebd0e5c..4ca81ef7c8bd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3485,144 +3485,6 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
 }
 EXPORT_SYMBOL_GPL(ata_wait_after_reset);
 
-/**
- *	sata_link_debounce - debounce SATA phy status
- *	@link: ATA link to debounce SATA phy status for
- *	@params: timing parameters { interval, duration, timeout } in msec
- *	@deadline: deadline jiffies for the operation
- *
- *	Make sure SStatus of @link reaches stable state, determined by
- *	holding the same value where DET is not 1 for @duration polled
- *	every @interval, before @timeout.  Timeout constraints the
- *	beginning of the stable state.  Because DET gets stuck at 1 on
- *	some controllers after hot unplugging, this functions waits
- *	until timeout then returns 0 if DET is stable at 1.
- *
- *	@timeout is further limited by @deadline.  The sooner of the
- *	two is used.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- *
- *	RETURNS:
- *	0 on success, -errno on failure.
- */
-int sata_link_debounce(struct ata_link *link, const unsigned long *params,
-		       unsigned long deadline)
-{
-	unsigned long interval = params[0];
-	unsigned long duration = params[1];
-	unsigned long last_jiffies, t;
-	u32 last, cur;
-	int rc;
-
-	t = ata_deadline(jiffies, params[2]);
-	if (time_before(t, deadline))
-		deadline = t;
-
-	if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
-		return rc;
-	cur &= 0xf;
-
-	last = cur;
-	last_jiffies = jiffies;
-
-	while (1) {
-		ata_msleep(link->ap, interval);
-		if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
-			return rc;
-		cur &= 0xf;
-
-		/* DET stable? */
-		if (cur == last) {
-			if (cur == 1 && time_before(jiffies, deadline))
-				continue;
-			if (time_after(jiffies,
-				       ata_deadline(last_jiffies, duration)))
-				return 0;
-			continue;
-		}
-
-		/* unstable, start over */
-		last = cur;
-		last_jiffies = jiffies;
-
-		/* Check deadline.  If debouncing failed, return
-		 * -EPIPE to tell upper layer to lower link speed.
-		 */
-		if (time_after(jiffies, deadline))
-			return -EPIPE;
-	}
-}
-EXPORT_SYMBOL_GPL(sata_link_debounce);
-
-/**
- *	sata_link_resume - resume SATA link
- *	@link: ATA link to resume SATA
- *	@params: timing parameters { interval, duration, timeout } in msec
- *	@deadline: deadline jiffies for the operation
- *
- *	Resume SATA phy @link and debounce it.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- *
- *	RETURNS:
- *	0 on success, -errno on failure.
- */
-int sata_link_resume(struct ata_link *link, const unsigned long *params,
-		     unsigned long deadline)
-{
-	int tries = ATA_LINK_RESUME_TRIES;
-	u32 scontrol, serror;
-	int rc;
-
-	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
-		return rc;
-
-	/*
-	 * Writes to SControl sometimes get ignored under certain
-	 * controllers (ata_piix SIDPR).  Make sure DET actually is
-	 * cleared.
-	 */
-	do {
-		scontrol = (scontrol & 0x0f0) | 0x300;
-		if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
-			return rc;
-		/*
-		 * Some PHYs react badly if SStatus is pounded
-		 * immediately after resuming.  Delay 200ms before
-		 * debouncing.
-		 */
-		if (!(link->flags & ATA_LFLAG_NO_DB_DELAY))
-			ata_msleep(link->ap, 200);
-
-		/* is SControl restored correctly? */
-		if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
-			return rc;
-	} while ((scontrol & 0xf0f) != 0x300 && --tries);
-
-	if ((scontrol & 0xf0f) != 0x300) {
-		ata_link_warn(link, "failed to resume link (SControl %X)\n",
-			     scontrol);
-		return 0;
-	}
-
-	if (tries < ATA_LINK_RESUME_TRIES)
-		ata_link_warn(link, "link resume succeeded after %d retries\n",
-			      ATA_LINK_RESUME_TRIES - tries);
-
-	if ((rc = sata_link_debounce(link, params, deadline)))
-		return rc;
-
-	/* clear SError, some PHYs require this even for SRST to work */
-	if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
-		rc = sata_scr_write(link, SCR_ERROR, serror);
-
-	return rc != -EINVAL ? rc : 0;
-}
-EXPORT_SYMBOL_GPL(sata_link_resume);
-
 /**
  *	ata_std_prereset - prepare for reset
  *	@link: ATA link to be reset
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index d66afdc33d54..34852fced999 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -196,6 +196,144 @@ void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
 }
 EXPORT_SYMBOL_GPL(ata_tf_from_fis);
 
+/**
+ *	sata_link_debounce - debounce SATA phy status
+ *	@link: ATA link to debounce SATA phy status for
+ *	@params: timing parameters { interval, duration, timeout } in msec
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Make sure SStatus of @link reaches stable state, determined by
+ *	holding the same value where DET is not 1 for @duration polled
+ *	every @interval, before @timeout.  Timeout constraints the
+ *	beginning of the stable state.  Because DET gets stuck at 1 on
+ *	some controllers after hot unplugging, this functions waits
+ *	until timeout then returns 0 if DET is stable at 1.
+ *
+ *	@timeout is further limited by @deadline.  The sooner of the
+ *	two is used.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+int sata_link_debounce(struct ata_link *link, const unsigned long *params,
+		       unsigned long deadline)
+{
+	unsigned long interval = params[0];
+	unsigned long duration = params[1];
+	unsigned long last_jiffies, t;
+	u32 last, cur;
+	int rc;
+
+	t = ata_deadline(jiffies, params[2]);
+	if (time_before(t, deadline))
+		deadline = t;
+
+	if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
+		return rc;
+	cur &= 0xf;
+
+	last = cur;
+	last_jiffies = jiffies;
+
+	while (1) {
+		ata_msleep(link->ap, interval);
+		if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
+			return rc;
+		cur &= 0xf;
+
+		/* DET stable? */
+		if (cur == last) {
+			if (cur == 1 && time_before(jiffies, deadline))
+				continue;
+			if (time_after(jiffies,
+				       ata_deadline(last_jiffies, duration)))
+				return 0;
+			continue;
+		}
+
+		/* unstable, start over */
+		last = cur;
+		last_jiffies = jiffies;
+
+		/* Check deadline.  If debouncing failed, return
+		 * -EPIPE to tell upper layer to lower link speed.
+		 */
+		if (time_after(jiffies, deadline))
+			return -EPIPE;
+	}
+}
+EXPORT_SYMBOL_GPL(sata_link_debounce);
+
+/**
+ *	sata_link_resume - resume SATA link
+ *	@link: ATA link to resume SATA
+ *	@params: timing parameters { interval, duration, timeout } in msec
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Resume SATA phy @link and debounce it.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+int sata_link_resume(struct ata_link *link, const unsigned long *params,
+		     unsigned long deadline)
+{
+	int tries = ATA_LINK_RESUME_TRIES;
+	u32 scontrol, serror;
+	int rc;
+
+	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+		return rc;
+
+	/*
+	 * Writes to SControl sometimes get ignored under certain
+	 * controllers (ata_piix SIDPR).  Make sure DET actually is
+	 * cleared.
+	 */
+	do {
+		scontrol = (scontrol & 0x0f0) | 0x300;
+		if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+			return rc;
+		/*
+		 * Some PHYs react badly if SStatus is pounded
+		 * immediately after resuming.  Delay 200ms before
+		 * debouncing.
+		 */
+		if (!(link->flags & ATA_LFLAG_NO_DB_DELAY))
+			ata_msleep(link->ap, 200);
+
+		/* is SControl restored correctly? */
+		if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+			return rc;
+	} while ((scontrol & 0xf0f) != 0x300 && --tries);
+
+	if ((scontrol & 0xf0f) != 0x300) {
+		ata_link_warn(link, "failed to resume link (SControl %X)\n",
+			     scontrol);
+		return 0;
+	}
+
+	if (tries < ATA_LINK_RESUME_TRIES)
+		ata_link_warn(link, "link resume succeeded after %d retries\n",
+			      ATA_LINK_RESUME_TRIES - tries);
+
+	if ((rc = sata_link_debounce(link, params, deadline)))
+		return rc;
+
+	/* clear SError, some PHYs require this even for SRST to work */
+	if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
+		rc = sata_scr_write(link, SCR_ERROR, serror);
+
+	return rc != -EINVAL ? rc : 0;
+}
+EXPORT_SYMBOL_GPL(sata_link_resume);
+
 /**
  *	sata_link_scr_lpm - manipulate SControl IPM and SPM fields
  *	@link: ATA link to manipulate SControl for
diff --git a/include/linux/libata.h b/include/linux/libata.h
index f0817a8f1e3f..b05538d06919 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1077,10 +1077,6 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
 extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
 extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
 				int (*check_ready)(struct ata_link *link));
-extern int sata_link_debounce(struct ata_link *link,
-			const unsigned long *params, unsigned long deadline);
-extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
-			    unsigned long deadline);
 extern int sata_link_hardreset(struct ata_link *link,
 			const unsigned long *timing, unsigned long deadline,
 			bool *online, int (*check_ready)(struct ata_link *));
@@ -1194,6 +1190,8 @@ extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
 extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
 extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
 extern int sata_set_spd(struct ata_link *link);
+extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
+			    unsigned long deadline);
 #else
 static inline int sata_scr_valid(struct ata_link *link) { return 0; }
 static inline int sata_scr_read(struct ata_link *link, int reg, u32 *val)
@@ -1209,7 +1207,15 @@ static inline int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
 	return -EOPNOTSUPP;
 }
 static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; }
+static inline int sata_link_resume(struct ata_link *link,
+				   const unsigned long *params,
+				   unsigned long deadline)
+{
+	return -EOPNOTSUPP;
+}
 #endif
+extern int sata_link_debounce(struct ata_link *link,
+			const unsigned long *params, unsigned long deadline);
 extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 			     bool spm_wakeup);
 extern int ata_slave_link_init(struct ata_port *ap);
-- 
2.24.1

[PATCH v5 20/27] ata: move sata_link_hardreset() to libata-sata.c

[Bartlomiej Zolnierkiewicz]

* move sata_link_hardreset() to libata-sata.c

* add static inline for CONFIG_SATA_HOST=n case

* make sata_set_spd_needed() static

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32724     572      40   33336    8238 drivers/ata/libata-core.o
after:
  32559     572      40   33171    8193 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 113 -------------------------------------
 drivers/ata/libata-sata.c | 115 +++++++++++++++++++++++++++++++++++++-
 drivers/ata/libata.h      |   7 ---
 include/linux/libata.h    |  16 +++++-
 4 files changed, 127 insertions(+), 124 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4ca81ef7c8bd..19624d056d92 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3531,119 +3531,6 @@ int ata_std_prereset(struct ata_link *link, unsigned long deadline)
 }
 EXPORT_SYMBOL_GPL(ata_std_prereset);
 
-/**
- *	sata_link_hardreset - reset link via SATA phy reset
- *	@link: link to reset
- *	@timing: timing parameters { interval, duration, timeout } in msec
- *	@deadline: deadline jiffies for the operation
- *	@online: optional out parameter indicating link onlineness
- *	@check_ready: optional callback to check link readiness
- *
- *	SATA phy-reset @link using DET bits of SControl register.
- *	After hardreset, link readiness is waited upon using
- *	ata_wait_ready() if @check_ready is specified.  LLDs are
- *	allowed to not specify @check_ready and wait itself after this
- *	function returns.  Device classification is LLD's
- *	responsibility.
- *
- *	*@online is set to one iff reset succeeded and @link is online
- *	after reset.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
-			unsigned long deadline,
-			bool *online, int (*check_ready)(struct ata_link *))
-{
-	u32 scontrol;
-	int rc;
-
-	DPRINTK("ENTER\n");
-
-	if (online)
-		*online = false;
-
-	if (sata_set_spd_needed(link)) {
-		/* SATA spec says nothing about how to reconfigure
-		 * spd.  To be on the safe side, turn off phy during
-		 * reconfiguration.  This works for at least ICH7 AHCI
-		 * and Sil3124.
-		 */
-		if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
-			goto out;
-
-		scontrol = (scontrol & 0x0f0) | 0x304;
-
-		if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
-			goto out;
-
-		sata_set_spd(link);
-	}
-
-	/* issue phy wake/reset */
-	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
-		goto out;
-
-	scontrol = (scontrol & 0x0f0) | 0x301;
-
-	if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol)))
-		goto out;
-
-	/* Couldn't find anything in SATA I/II specs, but AHCI-1.1
-	 * 10.4.2 says at least 1 ms.
-	 */
-	ata_msleep(link->ap, 1);
-
-	/* bring link back */
-	rc = sata_link_resume(link, timing, deadline);
-	if (rc)
-		goto out;
-	/* if link is offline nothing more to do */
-	if (ata_phys_link_offline(link))
-		goto out;
-
-	/* Link is online.  From this point, -ENODEV too is an error. */
-	if (online)
-		*online = true;
-
-	if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
-		/* If PMP is supported, we have to do follow-up SRST.
-		 * Some PMPs don't send D2H Reg FIS after hardreset if
-		 * the first port is empty.  Wait only for
-		 * ATA_TMOUT_PMP_SRST_WAIT.
-		 */
-		if (check_ready) {
-			unsigned long pmp_deadline;
-
-			pmp_deadline = ata_deadline(jiffies,
-						    ATA_TMOUT_PMP_SRST_WAIT);
-			if (time_after(pmp_deadline, deadline))
-				pmp_deadline = deadline;
-			ata_wait_ready(link, pmp_deadline, check_ready);
-		}
-		rc = -EAGAIN;
-		goto out;
-	}
-
-	rc = 0;
-	if (check_ready)
-		rc = ata_wait_ready(link, deadline, check_ready);
- out:
-	if (rc && rc != -EAGAIN) {
-		/* online is set iff link is online && reset succeeded */
-		if (online)
-			*online = false;
-		ata_link_err(link, "COMRESET failed (errno=%d)\n", rc);
-	}
-	DPRINTK("EXIT, rc=%d\n", rc);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(sata_link_hardreset);
-
 /**
  *	sata_std_hardreset - COMRESET w/o waiting or classification
  *	@link: link to reset
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 34852fced999..05a1872ba329 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -449,7 +449,7 @@ static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
  *	RETURNS:
  *	1 if SATA spd configuration is needed, 0 otherwise.
  */
-int sata_set_spd_needed(struct ata_link *link)
+static int sata_set_spd_needed(struct ata_link *link)
 {
 	u32 scontrol;
 
@@ -490,6 +490,119 @@ int sata_set_spd(struct ata_link *link)
 }
 EXPORT_SYMBOL_GPL(sata_set_spd);
 
+/**
+ *	sata_link_hardreset - reset link via SATA phy reset
+ *	@link: link to reset
+ *	@timing: timing parameters { interval, duration, timeout } in msec
+ *	@deadline: deadline jiffies for the operation
+ *	@online: optional out parameter indicating link onlineness
+ *	@check_ready: optional callback to check link readiness
+ *
+ *	SATA phy-reset @link using DET bits of SControl register.
+ *	After hardreset, link readiness is waited upon using
+ *	ata_wait_ready() if @check_ready is specified.  LLDs are
+ *	allowed to not specify @check_ready and wait itself after this
+ *	function returns.  Device classification is LLD's
+ *	responsibility.
+ *
+ *	*@online is set to one iff reset succeeded and @link is online
+ *	after reset.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
+			unsigned long deadline,
+			bool *online, int (*check_ready)(struct ata_link *))
+{
+	u32 scontrol;
+	int rc;
+
+	DPRINTK("ENTER\n");
+
+	if (online)
+		*online = false;
+
+	if (sata_set_spd_needed(link)) {
+		/* SATA spec says nothing about how to reconfigure
+		 * spd.  To be on the safe side, turn off phy during
+		 * reconfiguration.  This works for at least ICH7 AHCI
+		 * and Sil3124.
+		 */
+		if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+			goto out;
+
+		scontrol = (scontrol & 0x0f0) | 0x304;
+
+		if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+			goto out;
+
+		sata_set_spd(link);
+	}
+
+	/* issue phy wake/reset */
+	if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+		goto out;
+
+	scontrol = (scontrol & 0x0f0) | 0x301;
+
+	if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol)))
+		goto out;
+
+	/* Couldn't find anything in SATA I/II specs, but AHCI-1.1
+	 * 10.4.2 says at least 1 ms.
+	 */
+	ata_msleep(link->ap, 1);
+
+	/* bring link back */
+	rc = sata_link_resume(link, timing, deadline);
+	if (rc)
+		goto out;
+	/* if link is offline nothing more to do */
+	if (ata_phys_link_offline(link))
+		goto out;
+
+	/* Link is online.  From this point, -ENODEV too is an error. */
+	if (online)
+		*online = true;
+
+	if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
+		/* If PMP is supported, we have to do follow-up SRST.
+		 * Some PMPs don't send D2H Reg FIS after hardreset if
+		 * the first port is empty.  Wait only for
+		 * ATA_TMOUT_PMP_SRST_WAIT.
+		 */
+		if (check_ready) {
+			unsigned long pmp_deadline;
+
+			pmp_deadline = ata_deadline(jiffies,
+						    ATA_TMOUT_PMP_SRST_WAIT);
+			if (time_after(pmp_deadline, deadline))
+				pmp_deadline = deadline;
+			ata_wait_ready(link, pmp_deadline, check_ready);
+		}
+		rc = -EAGAIN;
+		goto out;
+	}
+
+	rc = 0;
+	if (check_ready)
+		rc = ata_wait_ready(link, deadline, check_ready);
+ out:
+	if (rc && rc != -EAGAIN) {
+		/* online is set iff link is online && reset succeeded */
+		if (online)
+			*online = false;
+		ata_link_err(link, "COMRESET failed (errno=%d)\n", rc);
+	}
+	DPRINTK("EXIT, rc=%d\n", rc);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(sata_link_hardreset);
+
 /**
  *	ata_slave_link_init - initialize slave link
  *	@ap: port to initialize slave link for
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 53b45ebe3d55..cd8090ad43e5 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -87,13 +87,6 @@ extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
 
 #define to_ata_port(d) container_of(d, struct ata_port, tdev)
 
-/* libata-sata.c */
-#ifdef CONFIG_SATA_HOST
-int sata_set_spd_needed(struct ata_link *link);
-#else
-static inline int sata_set_spd_needed(struct ata_link *link) { return 1; }
-#endif
-
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
 extern unsigned int ata_acpi_gtf_filter;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b05538d06919..981f73c02509 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1077,9 +1077,6 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
 extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
 extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
 				int (*check_ready)(struct ata_link *link));
-extern int sata_link_hardreset(struct ata_link *link,
-			const unsigned long *timing, unsigned long deadline,
-			bool *online, int (*check_ready)(struct ata_link *));
 extern int sata_std_hardreset(struct ata_link *link, unsigned int *class,
 			      unsigned long deadline);
 extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);
@@ -1190,6 +1187,9 @@ extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
 extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
 extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
 extern int sata_set_spd(struct ata_link *link);
+extern int sata_link_hardreset(struct ata_link *link,
+			const unsigned long *timing, unsigned long deadline,
+			bool *online, int (*check_ready)(struct ata_link *));
 extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
 			    unsigned long deadline);
 #else
@@ -1207,6 +1207,16 @@ static inline int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
 	return -EOPNOTSUPP;
 }
 static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; }
+static inline int sata_link_hardreset(struct ata_link *link,
+				      const unsigned long *timing,
+				      unsigned long deadline,
+				      bool *online,
+				      int (*check_ready)(struct ata_link *))
+{
+	if (online)
+		*online = false;
+	return -EOPNOTSUPP;
+}
 static inline int sata_link_resume(struct ata_link *link,
 				   const unsigned long *params,
 				   unsigned long deadline)
-- 
2.24.1

[PATCH v5 21/27] ata: move ata_qc_complete_multiple() to libata-sata.c

[Bartlomiej Zolnierkiewicz]

* move ata_qc_complete_multiple() to libata-sata.c

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32559     572      40   33171    8193 drivers/ata/libata-core.o
after:
  32162     572      40   32774    8006 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c | 59 ---------------------------------------
 drivers/ata/libata-sata.c | 59 +++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h    |  2 +-
 3 files changed, 60 insertions(+), 60 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 19624d056d92..2ef0960b2154 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4749,65 +4749,6 @@ u64 ata_qc_get_active(struct ata_port *ap)
 }
 EXPORT_SYMBOL_GPL(ata_qc_get_active);
 
-/**
- *	ata_qc_complete_multiple - Complete multiple qcs successfully
- *	@ap: port in question
- *	@qc_active: new qc_active mask
- *
- *	Complete in-flight commands.  This functions is meant to be
- *	called from low-level driver's interrupt routine to complete
- *	requests normally.  ap->qc_active and @qc_active is compared
- *	and commands are completed accordingly.
- *
- *	Always use this function when completing multiple NCQ commands
- *	from IRQ handlers instead of calling ata_qc_complete()
- *	multiple times to keep IRQ expect status properly in sync.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	Number of completed commands on success, -errno otherwise.
- */
-int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active)
-{
-	u64 done_mask, ap_qc_active = ap->qc_active;
-	int nr_done = 0;
-
-	/*
-	 * If the internal tag is set on ap->qc_active, then we care about
-	 * bit0 on the passed in qc_active mask. Move that bit up to match
-	 * the internal tag.
-	 */
-	if (ap_qc_active & (1ULL << ATA_TAG_INTERNAL)) {
-		qc_active |= (qc_active & 0x01) << ATA_TAG_INTERNAL;
-		qc_active ^= qc_active & 0x01;
-	}
-
-	done_mask = ap_qc_active ^ qc_active;
-
-	if (unlikely(done_mask & qc_active)) {
-		ata_port_err(ap, "illegal qc_active transition (%08llx->%08llx)\n",
-			     ap->qc_active, qc_active);
-		return -EINVAL;
-	}
-
-	while (done_mask) {
-		struct ata_queued_cmd *qc;
-		unsigned int tag = __ffs64(done_mask);
-
-		qc = ata_qc_from_tag(ap, tag);
-		if (qc) {
-			ata_qc_complete(qc);
-			nr_done++;
-		}
-		done_mask &= ~(1ULL << tag);
-	}
-
-	return nr_done;
-}
-EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
-
 /**
  *	ata_qc_issue - issue taskfile to device
  *	@qc: command to issue to device
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 05a1872ba329..849582e0d653 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -603,6 +603,65 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 }
 EXPORT_SYMBOL_GPL(sata_link_hardreset);
 
+/**
+ *	ata_qc_complete_multiple - Complete multiple qcs successfully
+ *	@ap: port in question
+ *	@qc_active: new qc_active mask
+ *
+ *	Complete in-flight commands.  This functions is meant to be
+ *	called from low-level driver's interrupt routine to complete
+ *	requests normally.  ap->qc_active and @qc_active is compared
+ *	and commands are completed accordingly.
+ *
+ *	Always use this function when completing multiple NCQ commands
+ *	from IRQ handlers instead of calling ata_qc_complete()
+ *	multiple times to keep IRQ expect status properly in sync.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	Number of completed commands on success, -errno otherwise.
+ */
+int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active)
+{
+	u64 done_mask, ap_qc_active = ap->qc_active;
+	int nr_done = 0;
+
+	/*
+	 * If the internal tag is set on ap->qc_active, then we care about
+	 * bit0 on the passed in qc_active mask. Move that bit up to match
+	 * the internal tag.
+	 */
+	if (ap_qc_active & (1ULL << ATA_TAG_INTERNAL)) {
+		qc_active |= (qc_active & 0x01) << ATA_TAG_INTERNAL;
+		qc_active ^= qc_active & 0x01;
+	}
+
+	done_mask = ap_qc_active ^ qc_active;
+
+	if (unlikely(done_mask & qc_active)) {
+		ata_port_err(ap, "illegal qc_active transition (%08llx->%08llx)\n",
+			     ap->qc_active, qc_active);
+		return -EINVAL;
+	}
+
+	while (done_mask) {
+		struct ata_queued_cmd *qc;
+		unsigned int tag = __ffs64(done_mask);
+
+		qc = ata_qc_from_tag(ap, tag);
+		if (qc) {
+			ata_qc_complete(qc);
+			nr_done++;
+		}
+		done_mask &= ~(1ULL << tag);
+	}
+
+	return nr_done;
+}
+EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
+
 /**
  *	ata_slave_link_init - initialize slave link
  *	@ap: port to initialize slave link for
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 981f73c02509..08fec96a6a1e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1160,7 +1160,6 @@ extern void ata_id_c_string(const u16 *id, unsigned char *s,
 extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
 					struct ata_taskfile *tf, u16 *id);
 extern void ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active);
 extern u64 ata_qc_get_active(struct ata_port *ap);
 extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd);
 extern int ata_std_bios_param(struct scsi_device *sdev,
@@ -1232,6 +1231,7 @@ extern int ata_slave_link_init(struct ata_port *ap);
 extern void ata_tf_to_fis(const struct ata_taskfile *tf,
 			  u8 pmp, int is_cmd, u8 *fis);
 extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
+extern int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active);
 extern bool sata_lpm_ignore_phy_events(struct ata_link *link);
 
 extern int ata_cable_40wire(struct ata_port *ap);
-- 
2.24.1

[PATCH v5 22/27] ata: move sata_deb_timing_*() to libata-sata.c

[Bartlomiej Zolnierkiewicz]

* move sata_deb_timing_*() to libata-sata.c

* add static inline for sata_ehc_deb_timing() for
  CONFIG_SATA_HOST=n case

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32158     572      40   32770    8002 drivers/ata/libata-core.o
after:
  32015     572      40   32627    7f73 drivers/ata/libata-core.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-core.c |  8 --------
 drivers/ata/libata-sata.c |  8 ++++++++
 include/linux/libata.h    | 31 ++++++++++++++++++-------------
 3 files changed, 26 insertions(+), 21 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2ef0960b2154..20c22dbc1f24 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -65,14 +65,6 @@
 #include "libata.h"
 #include "libata-transport.h"
 
-/* debounce timing parameters in msecs { interval, duration, timeout } */
-const unsigned long sata_deb_timing_normal[]		= {   5,  100, 2000 };
-EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
-const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
-EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
-const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
-EXPORT_SYMBOL_GPL(sata_deb_timing_long);
-
 const struct ata_port_operations ata_base_port_ops = {
 	.prereset		= ata_std_prereset,
 	.postreset		= ata_std_postreset,
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 849582e0d653..f3ad4aca5d09 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -12,6 +12,14 @@
 
 #include "libata.h"
 
+/* debounce timing parameters in msecs { interval, duration, timeout } */
+const unsigned long sata_deb_timing_normal[]		= {   5,  100, 2000 };
+EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
+const unsigned long sata_deb_timing_hotplug[]		= {  25,  500, 2000 };
+EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
+const unsigned long sata_deb_timing_long[]		= { 100, 2000, 5000 };
+EXPORT_SYMBOL_GPL(sata_deb_timing_long);
+
 /**
  *	sata_scr_valid - test whether SCRs are accessible
  *	@link: ATA link to test SCR accessibility for
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 08fec96a6a1e..90c929b5df3d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1019,10 +1019,6 @@ struct ata_timing {
 /*
  * Core layer - drivers/ata/libata-core.c
  */
-extern const unsigned long sata_deb_timing_normal[];
-extern const unsigned long sata_deb_timing_hotplug[];
-extern const unsigned long sata_deb_timing_long[];
-
 extern struct ata_port_operations ata_dummy_port_ops;
 extern const struct ata_port_info ata_dummy_port_info;
 
@@ -1060,15 +1056,6 @@ static inline int is_multi_taskfile(struct ata_taskfile *tf)
 	       (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
 }
 
-static inline const unsigned long *
-sata_ehc_deb_timing(struct ata_eh_context *ehc)
-{
-	if (ehc->i.flags & ATA_EHI_HOTPLUGGED)
-		return sata_deb_timing_hotplug;
-	else
-		return sata_deb_timing_normal;
-}
-
 static inline int ata_port_is_dummy(struct ata_port *ap)
 {
 	return ap->ops == &ata_dummy_port_ops;
@@ -1181,6 +1168,19 @@ extern void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *
  * SATA specific code - drivers/ata/libata-sata.c
  */
 #ifdef CONFIG_SATA_HOST
+extern const unsigned long sata_deb_timing_normal[];
+extern const unsigned long sata_deb_timing_hotplug[];
+extern const unsigned long sata_deb_timing_long[];
+
+static inline const unsigned long *
+sata_ehc_deb_timing(struct ata_eh_context *ehc)
+{
+	if (ehc->i.flags & ATA_EHI_HOTPLUGGED)
+		return sata_deb_timing_hotplug;
+	else
+		return sata_deb_timing_normal;
+}
+
 extern int sata_scr_valid(struct ata_link *link);
 extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
 extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
@@ -1192,6 +1192,11 @@ extern int sata_link_hardreset(struct ata_link *link,
 extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
 			    unsigned long deadline);
 #else
+static inline const unsigned long *
+sata_ehc_deb_timing(struct ata_eh_context *ehc)
+{
+	return NULL;
+}
 static inline int sata_scr_valid(struct ata_link *link) { return 0; }
 static inline int sata_scr_read(struct ata_link *link, int reg, u32 *val)
 {
-- 
2.24.1

[PATCH v5 23/27] ata: start separating SATA specific code from libata-scsi.c

[Bartlomiej Zolnierkiewicz]

Start separating SATA specific code from libata-scsi.c:

* un-static ata_scsi_find_dev()

* move following code to libata-sata.c:
  - SATA only sysfs device attributes handling
  - __ata_change_queue_depth()
  - ata_scsi_change_queue_depth()

* cover with CONFIG_SATA_HOST ifdef SATA only sysfs device
  attributes handling code and ATA_SHT_NCQ() macro in
  <linux/libata.h>

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  20702     105     576   21383    5387 drivers/ata/libata-scsi.o
after:
  19137      23     576   19736    4d18 drivers/ata/libata-scsi.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-sata.c | 298 +++++++++++++++++++++++++++++++++++++
 drivers/ata/libata-scsi.c | 301 +-------------------------------------
 drivers/ata/libata.h      |   2 +
 include/linux/libata.h    |   9 +-
 4 files changed, 308 insertions(+), 302 deletions(-)

diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index f3ad4aca5d09..341699f5af20 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -8,6 +8,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <scsi/scsi_device.h>
 #include <linux/libata.h>
 
 #include "libata.h"
@@ -764,3 +765,300 @@ bool sata_lpm_ignore_phy_events(struct ata_link *link)
 	return false;
 }
 EXPORT_SYMBOL_GPL(sata_lpm_ignore_phy_events);
+
+static const char *ata_lpm_policy_names[] = {
+	[ATA_LPM_UNKNOWN]		= "max_performance",
+	[ATA_LPM_MAX_POWER]		= "max_performance",
+	[ATA_LPM_MED_POWER]		= "medium_power",
+	[ATA_LPM_MED_POWER_WITH_DIPM]	= "med_power_with_dipm",
+	[ATA_LPM_MIN_POWER_WITH_PARTIAL] = "min_power_with_partial",
+	[ATA_LPM_MIN_POWER]		= "min_power",
+};
+
+static ssize_t ata_scsi_lpm_store(struct device *device,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(device);
+	struct ata_port *ap = ata_shost_to_port(shost);
+	struct ata_link *link;
+	struct ata_device *dev;
+	enum ata_lpm_policy policy;
+	unsigned long flags;
+
+	/* UNKNOWN is internal state, iterate from MAX_POWER */
+	for (policy = ATA_LPM_MAX_POWER;
+	     policy < ARRAY_SIZE(ata_lpm_policy_names); policy++) {
+		const char *name = ata_lpm_policy_names[policy];
+
+		if (strncmp(name, buf, strlen(name)) == 0)
+			break;
+	}
+	if (policy == ARRAY_SIZE(ata_lpm_policy_names))
+		return -EINVAL;
+
+	spin_lock_irqsave(ap->lock, flags);
+
+	ata_for_each_link(link, ap, EDGE) {
+		ata_for_each_dev(dev, &ap->link, ENABLED) {
+			if (dev->horkage & ATA_HORKAGE_NOLPM) {
+				count = -EOPNOTSUPP;
+				goto out_unlock;
+			}
+		}
+	}
+
+	ap->target_lpm_policy = policy;
+	ata_port_schedule_eh(ap);
+out_unlock:
+	spin_unlock_irqrestore(ap->lock, flags);
+	return count;
+}
+
+static ssize_t ata_scsi_lpm_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+
+	if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names))
+		return -EINVAL;
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			ata_lpm_policy_names[ap->target_lpm_policy]);
+}
+DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
+	    ata_scsi_lpm_show, ata_scsi_lpm_store);
+EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
+
+static ssize_t ata_ncq_prio_enable_show(struct device *device,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap;
+	struct ata_device *dev;
+	bool ncq_prio_enable;
+	int rc = 0;
+
+	ap = ata_shost_to_port(sdev->host);
+
+	spin_lock_irq(ap->lock);
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev) {
+		rc = -ENODEV;
+		goto unlock;
+	}
+
+	ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE;
+
+unlock:
+	spin_unlock_irq(ap->lock);
+
+	return rc ? rc : snprintf(buf, 20, "%u\n", ncq_prio_enable);
+}
+
+static ssize_t ata_ncq_prio_enable_store(struct device *device,
+					 struct device_attribute *attr,
+					 const char *buf, size_t len)
+{
+	struct scsi_device *sdev = to_scsi_device(device);
+	struct ata_port *ap;
+	struct ata_device *dev;
+	long int input;
+	int rc;
+
+	rc = kstrtol(buf, 10, &input);
+	if (rc)
+		return rc;
+	if ((input < 0) || (input > 1))
+		return -EINVAL;
+
+	ap = ata_shost_to_port(sdev->host);
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (unlikely(!dev))
+		return  -ENODEV;
+
+	spin_lock_irq(ap->lock);
+	if (input)
+		dev->flags |= ATA_DFLAG_NCQ_PRIO_ENABLE;
+	else
+		dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
+
+	dev->link->eh_info.action |= ATA_EH_REVALIDATE;
+	dev->link->eh_info.flags |= ATA_EHI_QUIET;
+	ata_port_schedule_eh(ap);
+	spin_unlock_irq(ap->lock);
+
+	ata_port_wait_eh(ap);
+
+	if (input) {
+		spin_lock_irq(ap->lock);
+		if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
+			dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
+			rc = -EIO;
+		}
+		spin_unlock_irq(ap->lock);
+	}
+
+	return rc ? rc : len;
+}
+
+DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR,
+	    ata_ncq_prio_enable_show, ata_ncq_prio_enable_store);
+EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_enable);
+
+struct device_attribute *ata_ncq_sdev_attrs[] = {
+	&dev_attr_unload_heads,
+	&dev_attr_ncq_prio_enable,
+	NULL
+};
+EXPORT_SYMBOL_GPL(ata_ncq_sdev_attrs);
+
+static ssize_t
+ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+	if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM))
+		return ap->ops->em_store(ap, buf, count);
+	return -EINVAL;
+}
+
+static ssize_t
+ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+
+	if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM))
+		return ap->ops->em_show(ap, buf);
+	return -EINVAL;
+}
+DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR,
+		ata_scsi_em_message_show, ata_scsi_em_message_store);
+EXPORT_SYMBOL_GPL(dev_attr_em_message);
+
+static ssize_t
+ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+
+	return snprintf(buf, 23, "%d\n", ap->em_message_type);
+}
+DEVICE_ATTR(em_message_type, S_IRUGO,
+		  ata_scsi_em_message_type_show, NULL);
+EXPORT_SYMBOL_GPL(dev_attr_em_message_type);
+
+static ssize_t
+ata_scsi_activity_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
+
+	if (atadev && ap->ops->sw_activity_show &&
+	    (ap->flags & ATA_FLAG_SW_ACTIVITY))
+		return ap->ops->sw_activity_show(atadev, buf);
+	return -EINVAL;
+}
+
+static ssize_t
+ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
+	const char *buf, size_t count)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
+	enum sw_activity val;
+	int rc;
+
+	if (atadev && ap->ops->sw_activity_store &&
+	    (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
+		val = simple_strtoul(buf, NULL, 0);
+		switch (val) {
+		case OFF: case BLINK_ON: case BLINK_OFF:
+			rc = ap->ops->sw_activity_store(atadev, val);
+			if (!rc)
+				return count;
+			else
+				return rc;
+		}
+	}
+	return -EINVAL;
+}
+DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show,
+			ata_scsi_activity_store);
+EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
+
+/**
+ *	__ata_change_queue_depth - helper for ata_scsi_change_queue_depth
+ *	@ap: ATA port to which the device change the queue depth
+ *	@sdev: SCSI device to configure queue depth for
+ *	@queue_depth: new queue depth
+ *
+ *	libsas and libata have different approaches for associating a sdev to
+ *	its ata_port.
+ *
+ */
+int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+			     int queue_depth)
+{
+	struct ata_device *dev;
+	unsigned long flags;
+
+	if (queue_depth < 1 || queue_depth == sdev->queue_depth)
+		return sdev->queue_depth;
+
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev || !ata_dev_enabled(dev))
+		return sdev->queue_depth;
+
+	/* NCQ enabled? */
+	spin_lock_irqsave(ap->lock, flags);
+	dev->flags &= ~ATA_DFLAG_NCQ_OFF;
+	if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
+		dev->flags |= ATA_DFLAG_NCQ_OFF;
+		queue_depth = 1;
+	}
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	/* limit and apply queue depth */
+	queue_depth = min(queue_depth, sdev->host->can_queue);
+	queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
+	queue_depth = min(queue_depth, ATA_MAX_QUEUE);
+
+	if (sdev->queue_depth == queue_depth)
+		return -EINVAL;
+
+	return scsi_change_queue_depth(sdev, queue_depth);
+}
+EXPORT_SYMBOL_GPL(__ata_change_queue_depth);
+
+/**
+ *	ata_scsi_change_queue_depth - SCSI callback for queue depth config
+ *	@sdev: SCSI device to configure queue depth for
+ *	@queue_depth: new queue depth
+ *
+ *	This is libata standard hostt->change_queue_depth callback.
+ *	SCSI will call into this callback when user tries to set queue
+ *	depth via sysfs.
+ *
+ *	LOCKING:
+ *	SCSI layer (we don't care)
+ *
+ *	RETURNS:
+ *	Newly configured queue depth.
+ */
+int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
+{
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+
+	return __ata_change_queue_depth(ap, sdev, queue_depth);
+}
+EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index ae63ef7adcb9..a5dfcd9e09a1 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -46,8 +46,6 @@ typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc);
 
 static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
 					const struct scsi_device *scsidev);
-static struct ata_device *ata_scsi_find_dev(struct ata_port *ap,
-					    const struct scsi_device *scsidev);
 
 #define RW_RECOVERY_MPAGE 0x1
 #define RW_RECOVERY_MPAGE_LEN 12
@@ -87,71 +85,6 @@ static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
 	0, 30	/* extended self test time, see 05-359r1 */
 };
 
-static const char *ata_lpm_policy_names[] = {
-	[ATA_LPM_UNKNOWN]		= "max_performance",
-	[ATA_LPM_MAX_POWER]		= "max_performance",
-	[ATA_LPM_MED_POWER]		= "medium_power",
-	[ATA_LPM_MED_POWER_WITH_DIPM]	= "med_power_with_dipm",
-	[ATA_LPM_MIN_POWER_WITH_PARTIAL] = "min_power_with_partial",
-	[ATA_LPM_MIN_POWER]		= "min_power",
-};
-
-static ssize_t ata_scsi_lpm_store(struct device *device,
-				  struct device_attribute *attr,
-				  const char *buf, size_t count)
-{
-	struct Scsi_Host *shost = class_to_shost(device);
-	struct ata_port *ap = ata_shost_to_port(shost);
-	struct ata_link *link;
-	struct ata_device *dev;
-	enum ata_lpm_policy policy;
-	unsigned long flags;
-
-	/* UNKNOWN is internal state, iterate from MAX_POWER */
-	for (policy = ATA_LPM_MAX_POWER;
-	     policy < ARRAY_SIZE(ata_lpm_policy_names); policy++) {
-		const char *name = ata_lpm_policy_names[policy];
-
-		if (strncmp(name, buf, strlen(name)) == 0)
-			break;
-	}
-	if (policy == ARRAY_SIZE(ata_lpm_policy_names))
-		return -EINVAL;
-
-	spin_lock_irqsave(ap->lock, flags);
-
-	ata_for_each_link(link, ap, EDGE) {
-		ata_for_each_dev(dev, &ap->link, ENABLED) {
-			if (dev->horkage & ATA_HORKAGE_NOLPM) {
-				count = -EOPNOTSUPP;
-				goto out_unlock;
-			}
-		}
-	}
-
-	ap->target_lpm_policy = policy;
-	ata_port_schedule_eh(ap);
-out_unlock:
-	spin_unlock_irqrestore(ap->lock, flags);
-	return count;
-}
-
-static ssize_t ata_scsi_lpm_show(struct device *dev,
-				 struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ata_port *ap = ata_shost_to_port(shost);
-
-	if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names))
-		return -EINVAL;
-
-	return snprintf(buf, PAGE_SIZE, "%s\n",
-			ata_lpm_policy_names[ap->target_lpm_policy]);
-}
-DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
-	    ata_scsi_lpm_show, ata_scsi_lpm_store);
-EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);
-
 static ssize_t ata_scsi_park_show(struct device *device,
 				  struct device_attribute *attr, char *buf)
 {
@@ -255,83 +188,6 @@ DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR,
 	    ata_scsi_park_show, ata_scsi_park_store);
 EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
 
-static ssize_t ata_ncq_prio_enable_show(struct device *device,
-					struct device_attribute *attr,
-					char *buf)
-{
-	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap;
-	struct ata_device *dev;
-	bool ncq_prio_enable;
-	int rc = 0;
-
-	ap = ata_shost_to_port(sdev->host);
-
-	spin_lock_irq(ap->lock);
-	dev = ata_scsi_find_dev(ap, sdev);
-	if (!dev) {
-		rc = -ENODEV;
-		goto unlock;
-	}
-
-	ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE;
-
-unlock:
-	spin_unlock_irq(ap->lock);
-
-	return rc ? rc : snprintf(buf, 20, "%u\n", ncq_prio_enable);
-}
-
-static ssize_t ata_ncq_prio_enable_store(struct device *device,
-					 struct device_attribute *attr,
-					 const char *buf, size_t len)
-{
-	struct scsi_device *sdev = to_scsi_device(device);
-	struct ata_port *ap;
-	struct ata_device *dev;
-	long int input;
-	int rc;
-
-	rc = kstrtol(buf, 10, &input);
-	if (rc)
-		return rc;
-	if ((input < 0) || (input > 1))
-		return -EINVAL;
-
-	ap = ata_shost_to_port(sdev->host);
-	dev = ata_scsi_find_dev(ap, sdev);
-	if (unlikely(!dev))
-		return  -ENODEV;
-
-	spin_lock_irq(ap->lock);
-	if (input)
-		dev->flags |= ATA_DFLAG_NCQ_PRIO_ENABLE;
-	else
-		dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
-
-	dev->link->eh_info.action |= ATA_EH_REVALIDATE;
-	dev->link->eh_info.flags |= ATA_EHI_QUIET;
-	ata_port_schedule_eh(ap);
-	spin_unlock_irq(ap->lock);
-
-	ata_port_wait_eh(ap);
-
-	if (input) {
-		spin_lock_irq(ap->lock);
-		if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
-			dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
-			rc = -EIO;
-		}
-		spin_unlock_irq(ap->lock);
-	}
-
-	return rc ? rc : len;
-}
-
-DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR,
-	    ata_ncq_prio_enable_show, ata_ncq_prio_enable_store);
-EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_enable);
-
 void ata_scsi_set_sense(struct ata_device *dev, struct scsi_cmnd *cmd,
 			u8 sk, u8 asc, u8 ascq)
 {
@@ -380,100 +236,12 @@ static void ata_scsi_set_invalid_parameter(struct ata_device *dev,
 				     field, 0xff, 0);
 }
 
-static ssize_t
-ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
-			  const char *buf, size_t count)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ata_port *ap = ata_shost_to_port(shost);
-	if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM))
-		return ap->ops->em_store(ap, buf, count);
-	return -EINVAL;
-}
-
-static ssize_t
-ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr,
-			 char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ata_port *ap = ata_shost_to_port(shost);
-
-	if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM))
-		return ap->ops->em_show(ap, buf);
-	return -EINVAL;
-}
-DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR,
-		ata_scsi_em_message_show, ata_scsi_em_message_store);
-EXPORT_SYMBOL_GPL(dev_attr_em_message);
-
-static ssize_t
-ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr,
-			      char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ata_port *ap = ata_shost_to_port(shost);
-
-	return snprintf(buf, 23, "%d\n", ap->em_message_type);
-}
-DEVICE_ATTR(em_message_type, S_IRUGO,
-		  ata_scsi_em_message_type_show, NULL);
-EXPORT_SYMBOL_GPL(dev_attr_em_message_type);
-
-static ssize_t
-ata_scsi_activity_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct scsi_device *sdev = to_scsi_device(dev);
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
-	struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
-
-	if (atadev && ap->ops->sw_activity_show &&
-	    (ap->flags & ATA_FLAG_SW_ACTIVITY))
-		return ap->ops->sw_activity_show(atadev, buf);
-	return -EINVAL;
-}
-
-static ssize_t
-ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
-	const char *buf, size_t count)
-{
-	struct scsi_device *sdev = to_scsi_device(dev);
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
-	struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
-	enum sw_activity val;
-	int rc;
-
-	if (atadev && ap->ops->sw_activity_store &&
-	    (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
-		val = simple_strtoul(buf, NULL, 0);
-		switch (val) {
-		case OFF: case BLINK_ON: case BLINK_OFF:
-			rc = ap->ops->sw_activity_store(atadev, val);
-			if (!rc)
-				return count;
-			else
-				return rc;
-		}
-	}
-	return -EINVAL;
-}
-DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show,
-			ata_scsi_activity_store);
-EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
-
 struct device_attribute *ata_common_sdev_attrs[] = {
 	&dev_attr_unload_heads,
 	NULL
 };
 EXPORT_SYMBOL_GPL(ata_common_sdev_attrs);
 
-struct device_attribute *ata_ncq_sdev_attrs[] = {
-	&dev_attr_unload_heads,
-	&dev_attr_ncq_prio_enable,
-	NULL
-};
-EXPORT_SYMBOL_GPL(ata_ncq_sdev_attrs);
-
 /**
  *	ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
  *	@sdev: SCSI device for which BIOS geometry is to be determined
@@ -1391,73 +1159,6 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev)
 }
 EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
 
-/**
- *	__ata_change_queue_depth - helper for ata_scsi_change_queue_depth
- *	@ap: ATA port to which the device change the queue depth
- *	@sdev: SCSI device to configure queue depth for
- *	@queue_depth: new queue depth
- *
- *	libsas and libata have different approaches for associating a sdev to
- *	its ata_port.
- *
- */
-int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
-			     int queue_depth)
-{
-	struct ata_device *dev;
-	unsigned long flags;
-
-	if (queue_depth < 1 || queue_depth == sdev->queue_depth)
-		return sdev->queue_depth;
-
-	dev = ata_scsi_find_dev(ap, sdev);
-	if (!dev || !ata_dev_enabled(dev))
-		return sdev->queue_depth;
-
-	/* NCQ enabled? */
-	spin_lock_irqsave(ap->lock, flags);
-	dev->flags &= ~ATA_DFLAG_NCQ_OFF;
-	if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
-		dev->flags |= ATA_DFLAG_NCQ_OFF;
-		queue_depth = 1;
-	}
-	spin_unlock_irqrestore(ap->lock, flags);
-
-	/* limit and apply queue depth */
-	queue_depth = min(queue_depth, sdev->host->can_queue);
-	queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
-	queue_depth = min(queue_depth, ATA_MAX_QUEUE);
-
-	if (sdev->queue_depth == queue_depth)
-		return -EINVAL;
-
-	return scsi_change_queue_depth(sdev, queue_depth);
-}
-EXPORT_SYMBOL_GPL(__ata_change_queue_depth);
-
-/**
- *	ata_scsi_change_queue_depth - SCSI callback for queue depth config
- *	@sdev: SCSI device to configure queue depth for
- *	@queue_depth: new queue depth
- *
- *	This is libata standard hostt->change_queue_depth callback.
- *	SCSI will call into this callback when user tries to set queue
- *	depth via sysfs.
- *
- *	LOCKING:
- *	SCSI layer (we don't care)
- *
- *	RETURNS:
- *	Newly configured queue depth.
- */
-int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
-{
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
-
-	return __ata_change_queue_depth(ap, sdev, queue_depth);
-}
-EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
-
 /**
  *	ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
  *	@qc: Storage for translated ATA taskfile
@@ -3094,7 +2795,7 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
  *	RETURNS:
  *	Associated ATA device, or %NULL if not found.
  */
-static struct ata_device *
+struct ata_device *
 ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
 {
 	struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index cd8090ad43e5..ce3f3c039572 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -112,6 +112,8 @@ static inline void ata_acpi_bind_dev(struct ata_device *dev) {}
 #endif
 
 /* libata-scsi.c */
+extern struct ata_device *ata_scsi_find_dev(struct ata_port *ap,
+					    const struct scsi_device *scsidev);
 extern int ata_scsi_add_hosts(struct ata_host *host,
 			      struct scsi_host_template *sht);
 extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 90c929b5df3d..ae74fd048a32 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -530,12 +530,14 @@ typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes,
 			      unsigned long deadline);
 typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes);
 
-extern struct device_attribute dev_attr_link_power_management_policy;
 extern struct device_attribute dev_attr_unload_heads;
+#ifdef CONFIG_SATA_HOST
+extern struct device_attribute dev_attr_link_power_management_policy;
 extern struct device_attribute dev_attr_ncq_prio_enable;
 extern struct device_attribute dev_attr_em_message_type;
 extern struct device_attribute dev_attr_em_message;
 extern struct device_attribute dev_attr_sw_activity;
+#endif
 
 enum sw_activity {
 	OFF,
@@ -1371,7 +1373,6 @@ extern int ata_link_nr_enabled(struct ata_link *link);
 extern const struct ata_port_operations ata_base_port_ops;
 extern const struct ata_port_operations sata_port_ops;
 extern struct device_attribute *ata_common_sdev_attrs[];
-extern struct device_attribute *ata_ncq_sdev_attrs[];
 
 /*
  * All sht initializers (BASE, PIO, BMDMA, NCQ) must be instantiated
@@ -1399,10 +1400,14 @@ extern struct device_attribute *ata_ncq_sdev_attrs[];
 	__ATA_BASE_SHT(drv_name),				\
 	.sdev_attrs		= ata_common_sdev_attrs
 
+#ifdef CONFIG_SATA_HOST
+extern struct device_attribute *ata_ncq_sdev_attrs[];
+
 #define ATA_NCQ_SHT(drv_name)					\
 	__ATA_BASE_SHT(drv_name),				\
 	.sdev_attrs		= ata_ncq_sdev_attrs,		\
 	.change_queue_depth	= ata_scsi_change_queue_depth
+#endif
 
 /*
  * PMP helpers
-- 
2.24.1

[PATCH v5 24/27] ata: move ata_sas_*() to libata-sata.c

[Bartlomiej Zolnierkiewicz]

* un-inline:
  - ata_scsi_dump_cdb()
  - __ata_scsi_queuecmd()

* un-static:
  - ata_scsi_sdev_config()
  - ata_scsi_dev_config()
  - ata_scsi_dump_cdb()
  - __ata_scsi_queuecmd()

* move ata_sas_*() to libata-sata.c:

* add static inlines for CONFIG_SATA_HOST=n case for
  ata_sas_{allocate,free}_tag()

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  19137      23     576   19736    4d18 drivers/ata/libata-scsi.o
after:
  18330      23     576   18929    49f1 drivers/ata/libata-scsi.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-sata.c | 213 ++++++++++++++++++++++++++++++++++++
 drivers/ata/libata-scsi.c | 222 +-------------------------------------
 drivers/ata/libata.h      |  19 +++-
 include/linux/libata.h    |  24 ++---
 4 files changed, 245 insertions(+), 233 deletions(-)

diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 341699f5af20..2d934ccfc930 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -8,10 +8,12 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <linux/libata.h>
 
 #include "libata.h"
+#include "libata-transport.h"
 
 /* debounce timing parameters in msecs { interval, duration, timeout } */
 const unsigned long sata_deb_timing_normal[]		= {   5,  100, 2000 };
@@ -1062,3 +1064,214 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
 	return __ata_change_queue_depth(ap, sdev, queue_depth);
 }
 EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
+
+/**
+ *	port_alloc - Allocate port for a SAS attached SATA device
+ *	@host: ATA host container for all SAS ports
+ *	@port_info: Information from low-level host driver
+ *	@shost: SCSI host that the scsi device is attached to
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *
+ *	RETURNS:
+ *	ata_port pointer on success / NULL on failure.
+ */
+
+struct ata_port *ata_sas_port_alloc(struct ata_host *host,
+				    struct ata_port_info *port_info,
+				    struct Scsi_Host *shost)
+{
+	struct ata_port *ap;
+
+	ap = ata_port_alloc(host);
+	if (!ap)
+		return NULL;
+
+	ap->port_no = 0;
+	ap->lock = &host->lock;
+	ap->pio_mask = port_info->pio_mask;
+	ap->mwdma_mask = port_info->mwdma_mask;
+	ap->udma_mask = port_info->udma_mask;
+	ap->flags |= port_info->flags;
+	ap->ops = port_info->port_ops;
+	ap->cbl = ATA_CBL_SATA;
+
+	return ap;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
+
+/**
+ *	ata_sas_port_start - Set port up for dma.
+ *	@ap: Port to initialize
+ *
+ *	Called just after data structures for each port are
+ *	initialized.
+ *
+ *	May be used as the port_start() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+int ata_sas_port_start(struct ata_port *ap)
+{
+	/*
+	 * the port is marked as frozen at allocation time, but if we don't
+	 * have new eh, we won't thaw it
+	 */
+	if (!ap->ops->error_handler)
+		ap->pflags &= ~ATA_PFLAG_FROZEN;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_start);
+
+/**
+ *	ata_port_stop - Undo ata_sas_port_start()
+ *	@ap: Port to shut down
+ *
+ *	May be used as the port_stop() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
+void ata_sas_port_stop(struct ata_port *ap)
+{
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_stop);
+
+/**
+ * ata_sas_async_probe - simply schedule probing and return
+ * @ap: Port to probe
+ *
+ * For batch scheduling of probe for sas attached ata devices, assumes
+ * the port has already been through ata_sas_port_init()
+ */
+void ata_sas_async_probe(struct ata_port *ap)
+{
+	__ata_port_probe(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_async_probe);
+
+int ata_sas_sync_probe(struct ata_port *ap)
+{
+	return ata_port_probe(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_sync_probe);
+
+
+/**
+ *	ata_sas_port_init - Initialize a SATA device
+ *	@ap: SATA port to initialize
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *
+ *	RETURNS:
+ *	Zero on success, non-zero on error.
+ */
+
+int ata_sas_port_init(struct ata_port *ap)
+{
+	int rc = ap->ops->port_start(ap);
+
+	if (rc)
+		return rc;
+	ap->print_id = atomic_inc_return(&ata_print_id);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_init);
+
+int ata_sas_tport_add(struct device *parent, struct ata_port *ap)
+{
+	return ata_tport_add(parent, ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_tport_add);
+
+void ata_sas_tport_delete(struct ata_port *ap)
+{
+	ata_tport_delete(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_tport_delete);
+
+/**
+ *	ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
+ *	@ap: SATA port to destroy
+ *
+ */
+
+void ata_sas_port_destroy(struct ata_port *ap)
+{
+	if (ap->ops->port_stop)
+		ap->ops->port_stop(ap);
+	kfree(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_destroy);
+
+/**
+ *	ata_sas_slave_configure - Default slave_config routine for libata devices
+ *	@sdev: SCSI device to configure
+ *	@ap: ATA port to which SCSI device is attached
+ *
+ *	RETURNS:
+ *	Zero.
+ */
+
+int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
+{
+	ata_scsi_sdev_config(sdev);
+	ata_scsi_dev_config(sdev, ap->link.device);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
+
+/**
+ *	ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
+ *	@cmd: SCSI command to be sent
+ *	@ap:	ATA port to which the command is being sent
+ *
+ *	RETURNS:
+ *	Return value from __ata_scsi_queuecmd() if @cmd can be queued,
+ *	0 otherwise.
+ */
+
+int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap)
+{
+	int rc = 0;
+
+	ata_scsi_dump_cdb(ap, cmd);
+
+	if (likely(ata_dev_enabled(ap->link.device)))
+		rc = __ata_scsi_queuecmd(cmd, ap->link.device);
+	else {
+		cmd->result = (DID_BAD_TARGET << 16);
+		cmd->scsi_done(cmd);
+	}
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_sas_queuecmd);
+
+int ata_sas_allocate_tag(struct ata_port *ap)
+{
+	unsigned int max_queue = ap->host->n_tags;
+	unsigned int i, tag;
+
+	for (i = 0, tag = ap->sas_last_tag + 1; i < max_queue; i++, tag++) {
+		tag = tag < max_queue ? tag : 0;
+
+		/* the last tag is reserved for internal command. */
+		if (ata_tag_internal(tag))
+			continue;
+
+		if (!test_and_set_bit(tag, &ap->sas_tag_allocated)) {
+			ap->sas_last_tag = tag;
+			return tag;
+		}
+	}
+	return -1;
+}
+
+void ata_sas_free_tag(unsigned int tag, struct ata_port *ap)
+{
+	clear_bit(tag, &ap->sas_tag_allocated);
+}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a5dfcd9e09a1..36e588d88b95 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -988,7 +988,7 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
 	scsi_set_sense_information(sb, SCSI_SENSE_BUFFERSIZE, block);
 }
 
-static void ata_scsi_sdev_config(struct scsi_device *sdev)
+void ata_scsi_sdev_config(struct scsi_device *sdev)
 {
 	sdev->use_10_for_rw = 1;
 	sdev->use_10_for_ms = 1;
@@ -1028,8 +1028,7 @@ static int atapi_drain_needed(struct request *rq)
 	return atapi_cmd_type(scsi_req(rq)->cmd[0]) == ATAPI_MISC;
 }
 
-static int ata_scsi_dev_config(struct scsi_device *sdev,
-			       struct ata_device *dev)
+int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 {
 	struct request_queue *q = sdev->request_queue;
 
@@ -4005,8 +4004,7 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
  *	Prints the contents of a SCSI command via printk().
  */
 
-static inline void ata_scsi_dump_cdb(struct ata_port *ap,
-				     struct scsi_cmnd *cmd)
+void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd)
 {
 #ifdef ATA_VERBOSE_DEBUG
 	struct scsi_device *scsidev = cmd->device;
@@ -4018,8 +4016,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap,
 #endif
 }
 
-static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
-				      struct ata_device *dev)
+int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev)
 {
 	u8 scsi_op = scmd->cmnd[0];
 	ata_xlat_func_t xlat_func;
@@ -4662,214 +4659,3 @@ void ata_scsi_dev_rescan(struct work_struct *work)
 	spin_unlock_irqrestore(ap->lock, flags);
 	mutex_unlock(&ap->scsi_scan_mutex);
 }
-
-/**
- *	ata_sas_port_alloc - Allocate port for a SAS attached SATA device
- *	@host: ATA host container for all SAS ports
- *	@port_info: Information from low-level host driver
- *	@shost: SCSI host that the scsi device is attached to
- *
- *	LOCKING:
- *	PCI/etc. bus probe sem.
- *
- *	RETURNS:
- *	ata_port pointer on success / NULL on failure.
- */
-
-struct ata_port *ata_sas_port_alloc(struct ata_host *host,
-				    struct ata_port_info *port_info,
-				    struct Scsi_Host *shost)
-{
-	struct ata_port *ap;
-
-	ap = ata_port_alloc(host);
-	if (!ap)
-		return NULL;
-
-	ap->port_no = 0;
-	ap->lock = &host->lock;
-	ap->pio_mask = port_info->pio_mask;
-	ap->mwdma_mask = port_info->mwdma_mask;
-	ap->udma_mask = port_info->udma_mask;
-	ap->flags |= port_info->flags;
-	ap->ops = port_info->port_ops;
-	ap->cbl = ATA_CBL_SATA;
-
-	return ap;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
-
-/**
- *	ata_sas_port_start - Set port up for dma.
- *	@ap: Port to initialize
- *
- *	Called just after data structures for each port are
- *	initialized.
- *
- *	May be used as the port_start() entry in ata_port_operations.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-int ata_sas_port_start(struct ata_port *ap)
-{
-	/*
-	 * the port is marked as frozen at allocation time, but if we don't
-	 * have new eh, we won't thaw it
-	 */
-	if (!ap->ops->error_handler)
-		ap->pflags &= ~ATA_PFLAG_FROZEN;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_start);
-
-/**
- *	ata_port_stop - Undo ata_sas_port_start()
- *	@ap: Port to shut down
- *
- *	May be used as the port_stop() entry in ata_port_operations.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-
-void ata_sas_port_stop(struct ata_port *ap)
-{
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_stop);
-
-/**
- * ata_sas_async_probe - simply schedule probing and return
- * @ap: Port to probe
- *
- * For batch scheduling of probe for sas attached ata devices, assumes
- * the port has already been through ata_sas_port_init()
- */
-void ata_sas_async_probe(struct ata_port *ap)
-{
-	__ata_port_probe(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_async_probe);
-
-int ata_sas_sync_probe(struct ata_port *ap)
-{
-	return ata_port_probe(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_sync_probe);
-
-
-/**
- *	ata_sas_port_init - Initialize a SATA device
- *	@ap: SATA port to initialize
- *
- *	LOCKING:
- *	PCI/etc. bus probe sem.
- *
- *	RETURNS:
- *	Zero on success, non-zero on error.
- */
-
-int ata_sas_port_init(struct ata_port *ap)
-{
-	int rc = ap->ops->port_start(ap);
-
-	if (rc)
-		return rc;
-	ap->print_id = atomic_inc_return(&ata_print_id);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_init);
-
-int ata_sas_tport_add(struct device *parent, struct ata_port *ap)
-{
-	return ata_tport_add(parent, ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_tport_add);
-
-void ata_sas_tport_delete(struct ata_port *ap)
-{
-	ata_tport_delete(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_tport_delete);
-
-/**
- *	ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
- *	@ap: SATA port to destroy
- *
- */
-
-void ata_sas_port_destroy(struct ata_port *ap)
-{
-	if (ap->ops->port_stop)
-		ap->ops->port_stop(ap);
-	kfree(ap);
-}
-EXPORT_SYMBOL_GPL(ata_sas_port_destroy);
-
-/**
- *	ata_sas_slave_configure - Default slave_config routine for libata devices
- *	@sdev: SCSI device to configure
- *	@ap: ATA port to which SCSI device is attached
- *
- *	RETURNS:
- *	Zero.
- */
-
-int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
-{
-	ata_scsi_sdev_config(sdev);
-	ata_scsi_dev_config(sdev, ap->link.device);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
-
-/**
- *	ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
- *	@cmd: SCSI command to be sent
- *	@ap:	ATA port to which the command is being sent
- *
- *	RETURNS:
- *	Return value from __ata_scsi_queuecmd() if @cmd can be queued,
- *	0 otherwise.
- */
-
-int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap)
-{
-	int rc = 0;
-
-	ata_scsi_dump_cdb(ap, cmd);
-
-	if (likely(ata_dev_enabled(ap->link.device)))
-		rc = __ata_scsi_queuecmd(cmd, ap->link.device);
-	else {
-		cmd->result = (DID_BAD_TARGET << 16);
-		cmd->scsi_done(cmd);
-	}
-	return rc;
-}
-EXPORT_SYMBOL_GPL(ata_sas_queuecmd);
-
-int ata_sas_allocate_tag(struct ata_port *ap)
-{
-	unsigned int max_queue = ap->host->n_tags;
-	unsigned int i, tag;
-
-	for (i = 0, tag = ap->sas_last_tag + 1; i < max_queue; i++, tag++) {
-		tag = tag < max_queue ? tag : 0;
-
-		/* the last tag is reserved for internal command. */
-		if (ata_tag_internal(tag))
-			continue;
-
-		if (!test_and_set_bit(tag, &ap->sas_tag_allocated)) {
-			ap->sas_last_tag = tag;
-			return tag;
-		}
-	}
-	return -1;
-}
-
-void ata_sas_free_tag(unsigned int tag, struct ata_port *ap)
-{
-	clear_bit(tag, &ap->sas_tag_allocated);
-}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index ce3f3c039572..6c808cf39135 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -87,6 +87,18 @@ extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
 
 #define to_ata_port(d) container_of(d, struct ata_port, tdev)
 
+/* libata-sata.c */
+#ifdef CONFIG_SATA_HOST
+int ata_sas_allocate_tag(struct ata_port *ap);
+void ata_sas_free_tag(unsigned int tag, struct ata_port *ap);
+#else
+static inline int ata_sas_allocate_tag(struct ata_port *ap)
+{
+	return -EOPNOTSUPP;
+}
+static inline void ata_sas_free_tag(unsigned int tag, struct ata_port *ap) { }
+#endif
+
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
 extern unsigned int ata_acpi_gtf_filter;
@@ -130,9 +142,10 @@ extern void ata_scsi_dev_rescan(struct work_struct *work);
 extern int ata_bus_probe(struct ata_port *ap);
 extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
 			      unsigned int id, u64 lun);
-int ata_sas_allocate_tag(struct ata_port *ap);
-void ata_sas_free_tag(unsigned int tag, struct ata_port *ap);
-
+void ata_scsi_sdev_config(struct scsi_device *sdev);
+int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev);
+void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd);
+int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev);
 
 /* libata-eh.c */
 extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ae74fd048a32..da899f18a3e9 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1094,18 +1094,6 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd,
 extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
 			    unsigned int cmd, void __user *arg);
-extern void ata_sas_port_destroy(struct ata_port *);
-extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
-					   struct ata_port_info *, struct Scsi_Host *);
-extern void ata_sas_async_probe(struct ata_port *ap);
-extern int ata_sas_sync_probe(struct ata_port *ap);
-extern int ata_sas_port_init(struct ata_port *);
-extern int ata_sas_port_start(struct ata_port *ap);
-extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap);
-extern void ata_sas_tport_delete(struct ata_port *ap);
-extern void ata_sas_port_stop(struct ata_port *ap);
-extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
-extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
 extern bool ata_link_online(struct ata_link *link);
 extern bool ata_link_offline(struct ata_link *link);
 #ifdef CONFIG_PM
@@ -1235,6 +1223,18 @@ extern int sata_link_debounce(struct ata_link *link,
 extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 			     bool spm_wakeup);
 extern int ata_slave_link_init(struct ata_port *ap);
+extern void ata_sas_port_destroy(struct ata_port *);
+extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
+					   struct ata_port_info *, struct Scsi_Host *);
+extern void ata_sas_async_probe(struct ata_port *ap);
+extern int ata_sas_sync_probe(struct ata_port *ap);
+extern int ata_sas_port_init(struct ata_port *);
+extern int ata_sas_port_start(struct ata_port *ap);
+extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap);
+extern void ata_sas_tport_delete(struct ata_port *ap);
+extern void ata_sas_port_stop(struct ata_port *ap);
+extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
+extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
 extern void ata_tf_to_fis(const struct ata_taskfile *tf,
 			  u8 pmp, int is_cmd, u8 *fis);
 extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
-- 
2.24.1

[PATCH v5 25/27] ata: start separating SATA specific code from libata-eh.c

[Bartlomiej Zolnierkiewicz]

Start separating SATA specific code from libata-eh.c:

* move sata_async_notification() to libata-sata.c:

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  16243      18       0   16261    3f85 drivers/ata/libata-eh.o
after:
  16164      18       0   16182    3f36 drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-eh.c   | 74 --------------------------------------
 drivers/ata/libata-sata.c | 75 +++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h    |  2 +-
 3 files changed, 76 insertions(+), 75 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8dc33b6832f0..ef4d606cd8c6 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1092,80 +1092,6 @@ int ata_port_freeze(struct ata_port *ap)
 }
 EXPORT_SYMBOL_GPL(ata_port_freeze);
 
-/**
- *	sata_async_notification - SATA async notification handler
- *	@ap: ATA port where async notification is received
- *
- *	Handler to be called when async notification via SDB FIS is
- *	received.  This function schedules EH if necessary.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	1 if EH is scheduled, 0 otherwise.
- */
-int sata_async_notification(struct ata_port *ap)
-{
-	u32 sntf;
-	int rc;
-
-	if (!(ap->flags & ATA_FLAG_AN))
-		return 0;
-
-	rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf);
-	if (rc == 0)
-		sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf);
-
-	if (!sata_pmp_attached(ap) || rc) {
-		/* PMP is not attached or SNTF is not available */
-		if (!sata_pmp_attached(ap)) {
-			/* PMP is not attached.  Check whether ATAPI
-			 * AN is configured.  If so, notify media
-			 * change.
-			 */
-			struct ata_device *dev = ap->link.device;
-
-			if ((dev->class == ATA_DEV_ATAPI) &&
-			    (dev->flags & ATA_DFLAG_AN))
-				ata_scsi_media_change_notify(dev);
-			return 0;
-		} else {
-			/* PMP is attached but SNTF is not available.
-			 * ATAPI async media change notification is
-			 * not used.  The PMP must be reporting PHY
-			 * status change, schedule EH.
-			 */
-			ata_port_schedule_eh(ap);
-			return 1;
-		}
-	} else {
-		/* PMP is attached and SNTF is available */
-		struct ata_link *link;
-
-		/* check and notify ATAPI AN */
-		ata_for_each_link(link, ap, EDGE) {
-			if (!(sntf & (1 << link->pmp)))
-				continue;
-
-			if ((link->device->class == ATA_DEV_ATAPI) &&
-			    (link->device->flags & ATA_DFLAG_AN))
-				ata_scsi_media_change_notify(link->device);
-		}
-
-		/* If PMP is reporting that PHY status of some
-		 * downstream ports has changed, schedule EH.
-		 */
-		if (sntf & (1 << SATA_PMP_CTRL_PORT)) {
-			ata_port_schedule_eh(ap);
-			return 1;
-		}
-
-		return 0;
-	}
-}
-EXPORT_SYMBOL_GPL(sata_async_notification);
-
 /**
  *	ata_eh_freeze_port - EH helper to freeze port
  *	@ap: ATA port to freeze
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 2d934ccfc930..008468e516cd 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -4,6 +4,7 @@
  *
  *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
  *  Copyright 2003-2004 Jeff Garzik
+ *  Copyright 2006 Tejun Heo <htejun@gmail.com>
  */
 
 #include <linux/kernel.h>
@@ -1275,3 +1276,77 @@ void ata_sas_free_tag(unsigned int tag, struct ata_port *ap)
 {
 	clear_bit(tag, &ap->sas_tag_allocated);
 }
+
+/**
+ *	sata_async_notification - SATA async notification handler
+ *	@ap: ATA port where async notification is received
+ *
+ *	Handler to be called when async notification via SDB FIS is
+ *	received.  This function schedules EH if necessary.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	1 if EH is scheduled, 0 otherwise.
+ */
+int sata_async_notification(struct ata_port *ap)
+{
+	u32 sntf;
+	int rc;
+
+	if (!(ap->flags & ATA_FLAG_AN))
+		return 0;
+
+	rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf);
+	if (rc == 0)
+		sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf);
+
+	if (!sata_pmp_attached(ap) || rc) {
+		/* PMP is not attached or SNTF is not available */
+		if (!sata_pmp_attached(ap)) {
+			/* PMP is not attached.  Check whether ATAPI
+			 * AN is configured.  If so, notify media
+			 * change.
+			 */
+			struct ata_device *dev = ap->link.device;
+
+			if ((dev->class == ATA_DEV_ATAPI) &&
+			    (dev->flags & ATA_DFLAG_AN))
+				ata_scsi_media_change_notify(dev);
+			return 0;
+		} else {
+			/* PMP is attached but SNTF is not available.
+			 * ATAPI async media change notification is
+			 * not used.  The PMP must be reporting PHY
+			 * status change, schedule EH.
+			 */
+			ata_port_schedule_eh(ap);
+			return 1;
+		}
+	} else {
+		/* PMP is attached and SNTF is available */
+		struct ata_link *link;
+
+		/* check and notify ATAPI AN */
+		ata_for_each_link(link, ap, EDGE) {
+			if (!(sntf & (1 << link->pmp)))
+				continue;
+
+			if ((link->device->class == ATA_DEV_ATAPI) &&
+			    (link->device->flags & ATA_DFLAG_AN))
+				ata_scsi_media_change_notify(link->device);
+		}
+
+		/* If PMP is reporting that PHY status of some
+		 * downstream ports has changed, schedule EH.
+		 */
+		if (sntf & (1 << SATA_PMP_CTRL_PORT)) {
+			ata_port_schedule_eh(ap);
+			return 1;
+		}
+
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(sata_async_notification);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index da899f18a3e9..9c7ca659dc94 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1240,6 +1240,7 @@ extern void ata_tf_to_fis(const struct ata_taskfile *tf,
 extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
 extern int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active);
 extern bool sata_lpm_ignore_phy_events(struct ata_link *link);
+extern int sata_async_notification(struct ata_port *ap);
 
 extern int ata_cable_40wire(struct ata_port *ap);
 extern int ata_cable_80wire(struct ata_port *ap);
@@ -1332,7 +1333,6 @@ extern void ata_port_wait_eh(struct ata_port *ap);
 extern int ata_link_abort(struct ata_link *link);
 extern int ata_port_abort(struct ata_port *ap);
 extern int ata_port_freeze(struct ata_port *ap);
-extern int sata_async_notification(struct ata_port *ap);
 
 extern void ata_eh_freeze_port(struct ata_port *ap);
 extern void ata_eh_thaw_port(struct ata_port *ap);
-- 
2.24.1

[PATCH v5 26/27] ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c

[Bartlomiej Zolnierkiewicz]

* move ata_eh_analyze_ncq_error() and ata_eh_read_log_10h() to
  libata-sata.c

* add static inline for ata_eh_analyze_ncq_error() for
  CONFIG_SATA_HOST=n case (link->sactive is non-zero only if
  NCQ commands are actually queued so empty function body is
  sufficient)

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  16164      18       0   16182    3f36 drivers/ata/libata-eh.o
after:
  15446      18       0   15464    3c68 drivers/ata/libata-eh.o

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/libata-eh.c   | 131 --------------------------------------
 drivers/ata/libata-sata.c | 131 ++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h    |   3 +-
 3 files changed, 133 insertions(+), 132 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ef4d606cd8c6..474c6c34fe02 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1351,62 +1351,6 @@ static const char *ata_err_string(unsigned int err_mask)
 	return "unknown error";
 }
 
-/**
- *	ata_eh_read_log_10h - Read log page 10h for NCQ error details
- *	@dev: Device to read log page 10h from
- *	@tag: Resulting tag of the failed command
- *	@tf: Resulting taskfile registers of the failed command
- *
- *	Read log page 10h to obtain NCQ error details and clear error
- *	condition.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-static int ata_eh_read_log_10h(struct ata_device *dev,
-			       int *tag, struct ata_taskfile *tf)
-{
-	u8 *buf = dev->link->ap->sector_buf;
-	unsigned int err_mask;
-	u8 csum;
-	int i;
-
-	err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, 0, buf, 1);
-	if (err_mask)
-		return -EIO;
-
-	csum = 0;
-	for (i = 0; i < ATA_SECT_SIZE; i++)
-		csum += buf[i];
-	if (csum)
-		ata_dev_warn(dev, "invalid checksum 0x%x on log page 10h\n",
-			     csum);
-
-	if (buf[0] & 0x80)
-		return -ENOENT;
-
-	*tag = buf[0] & 0x1f;
-
-	tf->command = buf[2];
-	tf->feature = buf[3];
-	tf->lbal = buf[4];
-	tf->lbam = buf[5];
-	tf->lbah = buf[6];
-	tf->device = buf[7];
-	tf->hob_lbal = buf[8];
-	tf->hob_lbam = buf[9];
-	tf->hob_lbah = buf[10];
-	tf->nsect = buf[12];
-	tf->hob_nsect = buf[13];
-	if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id))
-		tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
-
-	return 0;
-}
-
 /**
  *	atapi_eh_tur - perform ATAPI TEST_UNIT_READY
  *	@dev: target ATAPI device
@@ -1590,81 +1534,6 @@ static void ata_eh_analyze_serror(struct ata_link *link)
 	ehc->i.action |= action;
 }
 
-/**
- *	ata_eh_analyze_ncq_error - analyze NCQ error
- *	@link: ATA link to analyze NCQ error for
- *
- *	Read log page 10h, determine the offending qc and acquire
- *	error status TF.  For NCQ device errors, all LLDDs have to do
- *	is setting AC_ERR_DEV in ehi->err_mask.  This function takes
- *	care of the rest.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- */
-void ata_eh_analyze_ncq_error(struct ata_link *link)
-{
-	struct ata_port *ap = link->ap;
-	struct ata_eh_context *ehc = &link->eh_context;
-	struct ata_device *dev = link->device;
-	struct ata_queued_cmd *qc;
-	struct ata_taskfile tf;
-	int tag, rc;
-
-	/* if frozen, we can't do much */
-	if (ap->pflags & ATA_PFLAG_FROZEN)
-		return;
-
-	/* is it NCQ device error? */
-	if (!link->sactive || !(ehc->i.err_mask & AC_ERR_DEV))
-		return;
-
-	/* has LLDD analyzed already? */
-	ata_qc_for_each_raw(ap, qc, tag) {
-		if (!(qc->flags & ATA_QCFLAG_FAILED))
-			continue;
-
-		if (qc->err_mask)
-			return;
-	}
-
-	/* okay, this error is ours */
-	memset(&tf, 0, sizeof(tf));
-	rc = ata_eh_read_log_10h(dev, &tag, &tf);
-	if (rc) {
-		ata_link_err(link, "failed to read log page 10h (errno=%d)\n",
-			     rc);
-		return;
-	}
-
-	if (!(link->sactive & (1 << tag))) {
-		ata_link_err(link, "log page 10h reported inactive tag %d\n",
-			     tag);
-		return;
-	}
-
-	/* we've got the perpetrator, condemn it */
-	qc = __ata_qc_from_tag(ap, tag);
-	memcpy(&qc->result_tf, &tf, sizeof(tf));
-	qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
-	qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
-	if (dev->class == ATA_DEV_ZAC &&
-	    ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary)) {
-		char sense_key, asc, ascq;
-
-		sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
-		asc = (qc->result_tf.auxiliary >> 8) & 0xff;
-		ascq = qc->result_tf.auxiliary & 0xff;
-		ata_scsi_set_sense(dev, qc->scsicmd, sense_key, asc, ascq);
-		ata_scsi_set_sense_information(dev, qc->scsicmd,
-					       &qc->result_tf);
-		qc->flags |= ATA_QCFLAG_SENSE_VALID;
-	}
-
-	ehc->i.err_mask &= ~AC_ERR_DEV;
-}
-EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
-
 /**
  *	ata_eh_analyze_tf - analyze taskfile of a failed qc
  *	@qc: qc to analyze
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 008468e516cd..c16423e44525 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1350,3 +1350,134 @@ int sata_async_notification(struct ata_port *ap)
 	}
 }
 EXPORT_SYMBOL_GPL(sata_async_notification);
+
+/**
+ *	ata_eh_read_log_10h - Read log page 10h for NCQ error details
+ *	@dev: Device to read log page 10h from
+ *	@tag: Resulting tag of the failed command
+ *	@tf: Resulting taskfile registers of the failed command
+ *
+ *	Read log page 10h to obtain NCQ error details and clear error
+ *	condition.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+static int ata_eh_read_log_10h(struct ata_device *dev,
+			       int *tag, struct ata_taskfile *tf)
+{
+	u8 *buf = dev->link->ap->sector_buf;
+	unsigned int err_mask;
+	u8 csum;
+	int i;
+
+	err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, 0, buf, 1);
+	if (err_mask)
+		return -EIO;
+
+	csum = 0;
+	for (i = 0; i < ATA_SECT_SIZE; i++)
+		csum += buf[i];
+	if (csum)
+		ata_dev_warn(dev, "invalid checksum 0x%x on log page 10h\n",
+			     csum);
+
+	if (buf[0] & 0x80)
+		return -ENOENT;
+
+	*tag = buf[0] & 0x1f;
+
+	tf->command = buf[2];
+	tf->feature = buf[3];
+	tf->lbal = buf[4];
+	tf->lbam = buf[5];
+	tf->lbah = buf[6];
+	tf->device = buf[7];
+	tf->hob_lbal = buf[8];
+	tf->hob_lbam = buf[9];
+	tf->hob_lbah = buf[10];
+	tf->nsect = buf[12];
+	tf->hob_nsect = buf[13];
+	if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id))
+		tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
+
+	return 0;
+}
+
+/**
+ *	ata_eh_analyze_ncq_error - analyze NCQ error
+ *	@link: ATA link to analyze NCQ error for
+ *
+ *	Read log page 10h, determine the offending qc and acquire
+ *	error status TF.  For NCQ device errors, all LLDDs have to do
+ *	is setting AC_ERR_DEV in ehi->err_mask.  This function takes
+ *	care of the rest.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ */
+void ata_eh_analyze_ncq_error(struct ata_link *link)
+{
+	struct ata_port *ap = link->ap;
+	struct ata_eh_context *ehc = &link->eh_context;
+	struct ata_device *dev = link->device;
+	struct ata_queued_cmd *qc;
+	struct ata_taskfile tf;
+	int tag, rc;
+
+	/* if frozen, we can't do much */
+	if (ap->pflags & ATA_PFLAG_FROZEN)
+		return;
+
+	/* is it NCQ device error? */
+	if (!link->sactive || !(ehc->i.err_mask & AC_ERR_DEV))
+		return;
+
+	/* has LLDD analyzed already? */
+	ata_qc_for_each_raw(ap, qc, tag) {
+		if (!(qc->flags & ATA_QCFLAG_FAILED))
+			continue;
+
+		if (qc->err_mask)
+			return;
+	}
+
+	/* okay, this error is ours */
+	memset(&tf, 0, sizeof(tf));
+	rc = ata_eh_read_log_10h(dev, &tag, &tf);
+	if (rc) {
+		ata_link_err(link, "failed to read log page 10h (errno=%d)\n",
+			     rc);
+		return;
+	}
+
+	if (!(link->sactive & (1 << tag))) {
+		ata_link_err(link, "log page 10h reported inactive tag %d\n",
+			     tag);
+		return;
+	}
+
+	/* we've got the perpetrator, condemn it */
+	qc = __ata_qc_from_tag(ap, tag);
+	memcpy(&qc->result_tf, &tf, sizeof(tf));
+	qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
+	qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
+	if (dev->class == ATA_DEV_ZAC &&
+	    ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary)) {
+		char sense_key, asc, ascq;
+
+		sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
+		asc = (qc->result_tf.auxiliary >> 8) & 0xff;
+		ascq = qc->result_tf.auxiliary & 0xff;
+		ata_scsi_set_sense(dev, qc->scsicmd, sense_key, asc, ascq);
+		ata_scsi_set_sense_information(dev, qc->scsicmd,
+					       &qc->result_tf);
+		qc->flags |= ATA_QCFLAG_SENSE_VALID;
+	}
+
+	ehc->i.err_mask &= ~AC_ERR_DEV;
+}
+EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 9c7ca659dc94..cffa4714bfa8 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1181,6 +1181,7 @@ extern int sata_link_hardreset(struct ata_link *link,
 			bool *online, int (*check_ready)(struct ata_link *));
 extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
 			    unsigned long deadline);
+extern void ata_eh_analyze_ncq_error(struct ata_link *link);
 #else
 static inline const unsigned long *
 sata_ehc_deb_timing(struct ata_eh_context *ehc)
@@ -1217,6 +1218,7 @@ static inline int sata_link_resume(struct ata_link *link,
 {
 	return -EOPNOTSUPP;
 }
+static inline void ata_eh_analyze_ncq_error(struct ata_link *link) { }
 #endif
 extern int sata_link_debounce(struct ata_link *link,
 			const unsigned long *params, unsigned long deadline);
@@ -1339,7 +1341,6 @@ extern void ata_eh_thaw_port(struct ata_port *ap);
 
 extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
 extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
-extern void ata_eh_analyze_ncq_error(struct ata_link *link);
 
 extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
 		      ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
-- 
2.24.1

[PATCH v5 27/27] ata: make "libata.force" kernel parameter optional

[Bartlomiej Zolnierkiewicz]

Add ATA_FORCE config option (visible only if EXPERT config
option is enabled) and make "libata.force" kernel parameter
optional.

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
w/ CONFIG_ATA_FORCE=y:
  31983     572      40   32595    7f53 drivers/ata/libata-core.o
w/ CONFIG_ATA_FROCE=n:
  28958     316      32   29306    727a drivers/ata/libata-core.o

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/Kconfig       | 16 ++++++++++++++++
 drivers/ata/libata-core.c | 22 ++++++++++++++++++++--
 drivers/ata/libata.h      |  4 ++++
 3 files changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5b55ebf56b5a..05ecdce1b702 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -51,6 +51,22 @@ config ATA_VERBOSE_ERROR
 
 	  If unsure, say Y.
 
+config ATA_FORCE
+	bool "\"libata.force=\" kernel parameter support" if EXPERT
+	default y
+	help
+	  This option adds support for "libata.force=" kernel parameter for
+	  forcing configuration settings.
+
+	  For further information, please read
+	  <file:Documentation/admin-guide/kernel-parameters.txt>.
+
+	  This option will enlarge the kernel by approx. 3KB. Disable it if
+	  kernel size is more important than ability to override the default
+	  configuration settings.
+
+	  If unsure, say Y.
+
 config ATA_ACPI
 	bool "ATA ACPI Support"
 	depends on ACPI
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 20c22dbc1f24..beca5f91bb4c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -89,6 +89,7 @@ static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
 
 atomic_t ata_print_id = ATOMIC_INIT(0);
 
+#ifdef CONFIG_ATA_FORCE
 struct ata_force_param {
 	const char	*name;
 	u8		cbl;
@@ -112,6 +113,7 @@ static char ata_force_param_buf[COMMAND_LINE_SIZE] __initdata;
 /* param_buf is thrown away after initialization, disallow read */
 module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
 MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/admin-guide/kernel-parameters.rst for details)");
+#endif
 
 static int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
@@ -303,6 +305,7 @@ struct ata_link *ata_dev_phys_link(struct ata_device *dev)
 	return ap->slave_link;
 }
 
+#ifdef CONFIG_ATA_FORCE
 /**
  *	ata_force_cbl - force cable type according to libata.force
  *	@ap: ATA port of interest
@@ -483,6 +486,11 @@ static void ata_force_horkage(struct ata_device *dev)
 			       fe->param.name);
 	}
 }
+#else
+static inline void ata_force_link_limits(struct ata_link *link) { }
+static inline void ata_force_xfermask(struct ata_device *dev) { }
+static inline void ata_force_horkage(struct ata_device *dev) { }
+#endif
 
 /**
  *	atapi_cmd_type - Determine ATAPI command type from SCSI opcode
@@ -6080,6 +6088,7 @@ int ata_platform_remove_one(struct platform_device *pdev)
 }
 EXPORT_SYMBOL_GPL(ata_platform_remove_one);
 
+#ifdef CONFIG_ATA_FORCE
 static int __init ata_parse_force_one(char **cur,
 				      struct ata_force_ent *force_ent,
 				      const char **reason)
@@ -6259,6 +6268,15 @@ static void __init ata_parse_force_param(void)
 	ata_force_tbl_size = idx;
 }
 
+static void ata_free_force_param(void)
+{
+	kfree(ata_force_tbl);
+}
+#else
+static inline void ata_parse_force_param(void) { }
+static inline void ata_free_force_param(void) { }
+#endif
+
 static int __init ata_init(void)
 {
 	int rc;
@@ -6267,7 +6285,7 @@ static int __init ata_init(void)
 
 	rc = ata_sff_init();
 	if (rc) {
-		kfree(ata_force_tbl);
+		ata_free_force_param();
 		return rc;
 	}
 
@@ -6291,7 +6309,7 @@ static void __exit ata_exit(void)
 	ata_release_transport(ata_scsi_transport_template);
 	libata_transport_exit();
 	ata_sff_exit();
-	kfree(ata_force_tbl);
+	ata_free_force_param();
 }
 
 subsys_initcall(ata_init);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 6c808cf39135..68cdd81d747c 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -37,7 +37,11 @@ extern int libata_noacpi;
 extern int libata_allow_tpm;
 extern const struct device_type ata_port_type;
 extern struct ata_link *ata_dev_phys_link(struct ata_device *dev);
+#ifdef CONFIG_ATA_FORCE
 extern void ata_force_cbl(struct ata_port *ap);
+#else
+static inline void ata_force_cbl(struct ata_port *ap) { }
+#endif
 extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
 extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
 extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
-- 
2.24.1

Re: [PATCH v5 00/27] ata: optimize core code size on PATA only setups

[Jens Axboe]

On 3/26/20 9:57 AM, Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> There have been reports in the past of libata core code size
> being a problem in migration from deprecated IDE subsystem on
> legacy PATA only systems, i.e.:
> 
> https://lore.kernel.org/linux-ide/db2838b7-4862-785b-3a1d-3bf09811340a@gmail.com/
> 
> This patchset re-organizes libata core code to exclude SATA
> specific code from being built for PATA only setups.
> 
> The end result is up to 24% (by 23949 bytes, from 101769 bytes to
> 77820 bytes) smaller libata core code size (as measured for m68k
> arch using modified atari_defconfig) on affected setups.
> 
> I've tested this patchset using pata_falcon driver under ARAnyM
> emulator.

Thanks, applied.

-- 
Jens Axboe