* [PATCH v4 0/4] Config mipi tx current and impedance
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: linux-mediatek, devicetree, linux-arm-kernel, srv_heupstream,
yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu,
stonea168, huijuan.xie, Jitao Shi
Changes since v3:
- refine drive-strength-microamp as from 3000 to 6000.
Changes since v2:
- fix the title of commit message.
- rename mipitx-current-drive to drive-strength-microamp
Changes since v1:
- fix coding style.
- change mtk_mipi_tx_config_calibration_data() to void
Jitao Shi (4):
dt-bindings: display: mediatek: add property to control mipi tx drive
current
dt-bindings: display: mediatek: get mipitx calibration data from nvmem
drm/mediatek: add the mipitx driving control
drm/mediatek: config mipitx impedance with calibration data
.../display/mediatek/mediatek,dsi.txt | 10 +++
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 64 +++++++++++++++++++
4 files changed, 89 insertions(+)
--
2.21.0
^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v4 0/4] Config mipi tx current and impedance
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen,
eddie.huang, linux-arm-kernel
Changes since v3:
- refine drive-strength-microamp as from 3000 to 6000.
Changes since v2:
- fix the title of commit message.
- rename mipitx-current-drive to drive-strength-microamp
Changes since v1:
- fix coding style.
- change mtk_mipi_tx_config_calibration_data() to void
Jitao Shi (4):
dt-bindings: display: mediatek: add property to control mipi tx drive
current
dt-bindings: display: mediatek: get mipitx calibration data from nvmem
drm/mediatek: add the mipitx driving control
drm/mediatek: config mipitx impedance with calibration data
.../display/mediatek/mediatek,dsi.txt | 10 +++
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 64 +++++++++++++++++++
4 files changed, 89 insertions(+)
--
2.21.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v4 0/4] Config mipi tx current and impedance
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen,
eddie.huang, linux-arm-kernel
Changes since v3:
- refine drive-strength-microamp as from 3000 to 6000.
Changes since v2:
- fix the title of commit message.
- rename mipitx-current-drive to drive-strength-microamp
Changes since v1:
- fix coding style.
- change mtk_mipi_tx_config_calibration_data() to void
Jitao Shi (4):
dt-bindings: display: mediatek: add property to control mipi tx drive
current
dt-bindings: display: mediatek: get mipitx calibration data from nvmem
drm/mediatek: add the mipitx driving control
drm/mediatek: config mipitx impedance with calibration data
.../display/mediatek/mediatek,dsi.txt | 10 +++
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 64 +++++++++++++++++++
4 files changed, 89 insertions(+)
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v4 0/4] Config mipi tx current and impedance
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang,
linux-arm-kernel
Changes since v3:
- refine drive-strength-microamp as from 3000 to 6000.
Changes since v2:
- fix the title of commit message.
- rename mipitx-current-drive to drive-strength-microamp
Changes since v1:
- fix coding style.
- change mtk_mipi_tx_config_calibration_data() to void
Jitao Shi (4):
dt-bindings: display: mediatek: add property to control mipi tx drive
current
dt-bindings: display: mediatek: get mipitx calibration data from nvmem
drm/mediatek: add the mipitx driving control
drm/mediatek: config mipitx impedance with calibration data
.../display/mediatek/mediatek,dsi.txt | 10 +++
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 64 +++++++++++++++++++
4 files changed, 89 insertions(+)
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v4 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current
2020-03-31 8:27 ` Jitao Shi
(?)
(?)
@ 2020-03-31 8:27 ` Jitao Shi
-1 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: linux-mediatek, devicetree, linux-arm-kernel, srv_heupstream,
yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu,
stonea168, huijuan.xie, Jitao Shi
Add a property to control mipi tx drive current:
"drive-strength-microamp"
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index a19a6cc375ed..d78b6d6d8fab 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -33,6 +33,10 @@ Required properties:
- #clock-cells: must be <0>;
- #phy-cells: must be <0>.
+Optional properties:
+- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
+ the step is 200.
+
Example:
mipi_tx0: mipi-dphy@10215000 {
@@ -42,6 +46,7 @@ mipi_tx0: mipi-dphy@10215000 {
clock-output-names = "mipi_tx0_pll";
#clock-cells = <0>;
#phy-cells = <0>;
+ drive-strength-microamp = <4600>;
};
dsi0: dsi@1401b000 {
--
2.21.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen,
eddie.huang, linux-arm-kernel
Add a property to control mipi tx drive current:
"drive-strength-microamp"
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index a19a6cc375ed..d78b6d6d8fab 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -33,6 +33,10 @@ Required properties:
- #clock-cells: must be <0>;
- #phy-cells: must be <0>.
+Optional properties:
+- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
+ the step is 200.
+
Example:
mipi_tx0: mipi-dphy@10215000 {
@@ -42,6 +46,7 @@ mipi_tx0: mipi-dphy@10215000 {
clock-output-names = "mipi_tx0_pll";
#clock-cells = <0>;
#phy-cells = <0>;
+ drive-strength-microamp = <4600>;
};
dsi0: dsi@1401b000 {
--
2.21.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen,
eddie.huang, linux-arm-kernel
Add a property to control mipi tx drive current:
"drive-strength-microamp"
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index a19a6cc375ed..d78b6d6d8fab 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -33,6 +33,10 @@ Required properties:
- #clock-cells: must be <0>;
- #phy-cells: must be <0>.
+Optional properties:
+- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
+ the step is 200.
+
Example:
mipi_tx0: mipi-dphy@10215000 {
@@ -42,6 +46,7 @@ mipi_tx0: mipi-dphy@10215000 {
clock-output-names = "mipi_tx0_pll";
#clock-cells = <0>;
#phy-cells = <0>;
+ drive-strength-microamp = <4600>;
};
dsi0: dsi@1401b000 {
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang,
linux-arm-kernel
Add a property to control mipi tx drive current:
"drive-strength-microamp"
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index a19a6cc375ed..d78b6d6d8fab 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -33,6 +33,10 @@ Required properties:
- #clock-cells: must be <0>;
- #phy-cells: must be <0>.
+Optional properties:
+- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
+ the step is 200.
+
Example:
mipi_tx0: mipi-dphy@10215000 {
@@ -42,6 +46,7 @@ mipi_tx0: mipi-dphy@10215000 {
clock-output-names = "mipi_tx0_pll";
#clock-cells = <0>;
#phy-cells = <0>;
+ drive-strength-microamp = <4600>;
};
dsi0: dsi@1401b000 {
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem
2020-03-31 8:27 ` Jitao Shi
(?)
(?)
@ 2020-03-31 8:27 ` Jitao Shi
-1 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: linux-mediatek, devicetree, linux-arm-kernel, srv_heupstream,
yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu,
stonea168, huijuan.xie, Jitao Shi, Rob Herring
Add properties to get get mipitx calibration data.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index d78b6d6d8fab..8e4729de8c85 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -36,6 +36,9 @@ Required properties:
Optional properties:
- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
the step is 200.
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+ unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
Example:
@@ -47,6 +50,8 @@ mipi_tx0: mipi-dphy@10215000 {
#clock-cells = <0>;
#phy-cells = <0>;
drive-strength-microamp = <4600>;
+ nvmem-cells= <&mipi_tx_calibration>;
+ nvmem-cell-names = "calibration-data";
};
dsi0: dsi@1401b000 {
--
2.21.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, Rob Herring, huijuan.xie,
stonea168, cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu,
yingjoe.chen, eddie.huang, linux-arm-kernel
Add properties to get get mipitx calibration data.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index d78b6d6d8fab..8e4729de8c85 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -36,6 +36,9 @@ Required properties:
Optional properties:
- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
the step is 200.
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+ unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
Example:
@@ -47,6 +50,8 @@ mipi_tx0: mipi-dphy@10215000 {
#clock-cells = <0>;
#phy-cells = <0>;
drive-strength-microamp = <4600>;
+ nvmem-cells= <&mipi_tx_calibration>;
+ nvmem-cell-names = "calibration-data";
};
dsi0: dsi@1401b000 {
--
2.21.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, Rob Herring, huijuan.xie,
stonea168, cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu,
yingjoe.chen, eddie.huang, linux-arm-kernel
Add properties to get get mipitx calibration data.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index d78b6d6d8fab..8e4729de8c85 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -36,6 +36,9 @@ Required properties:
Optional properties:
- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
the step is 200.
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+ unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
Example:
@@ -47,6 +50,8 @@ mipi_tx0: mipi-dphy@10215000 {
#clock-cells = <0>;
#phy-cells = <0>;
drive-strength-microamp = <4600>;
+ nvmem-cells= <&mipi_tx_calibration>;
+ nvmem-cell-names = "calibration-data";
};
dsi0: dsi@1401b000 {
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang,
linux-arm-kernel
Add properties to get get mipitx calibration data.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
.../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index d78b6d6d8fab..8e4729de8c85 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -36,6 +36,9 @@ Required properties:
Optional properties:
- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
the step is 200.
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+ unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
Example:
@@ -47,6 +50,8 @@ mipi_tx0: mipi-dphy@10215000 {
#clock-cells = <0>;
#phy-cells = <0>;
drive-strength-microamp = <4600>;
+ nvmem-cells= <&mipi_tx_calibration>;
+ nvmem-cell-names = "calibration-data";
};
dsi0: dsi@1401b000 {
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 3/4] drm/mediatek: add the mipitx driving control
2020-03-31 8:27 ` Jitao Shi
(?)
(?)
@ 2020-03-31 8:27 ` Jitao Shi
-1 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: linux-mediatek, devicetree, linux-arm-kernel, srv_heupstream,
yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu,
stonea168, huijuan.xie, Jitao Shi
Add a property in device tree to control the driving by different
board.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++++++++++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++
3 files changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index e4d34484ecc8..e301af64809e 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -125,6 +125,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return ret;
}
+ ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
+ &mipi_tx->mipitx_drive);
+ /* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */
+ if (ret < 0)
+ mipi_tx->mipitx_drive = 4600;
+
+ /* check the mipitx_drive valid */
+ if (mipi_tx->mipitx_drive > 6000 || mipi_tx->mipitx_drive < 3000) {
+ dev_warn(dev, "drive-strength-microamp is invalid %d, not in 3000 ~ 6000\n",
+ mipi_tx->mipitx_drive);
+ mipi_tx->mipitx_drive = clamp_val(mipi_tx->mipitx_drive, 3000,
+ 6000);
+ }
+
ref_clk_name = __clk_get_name(ref_clk);
ret = of_property_read_string(dev->of_node, "clock-output-names",
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
index 413f35d86219..eea44327fe9f 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
@@ -27,6 +27,7 @@ struct mtk_mipi_tx {
struct device *dev;
void __iomem *regs;
u32 data_rate;
+ u32 mipitx_drive;
const struct mtk_mipitx_data *driver_data;
struct clk_hw pll_hw;
struct clk *pll;
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
index 91f08a351fd0..e4cc967750cb 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
@@ -17,6 +17,9 @@
#define RG_DSI_BG_CORE_EN BIT(7)
#define RG_DSI_PAD_TIEL_SEL BIT(8)
+#define MIPITX_VOLTAGE_SEL 0x0010
+#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6)
+
#define MIPITX_PLL_PWR 0x0028
#define MIPITX_PLL_CON0 0x002c
#define MIPITX_PLL_CON1 0x0030
@@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL,
+ RG_DSI_HSTX_LDO_REF_SEL,
+ (mipi_tx->mipitx_drive - 3000) / 200 << 6);
+
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
--
2.21.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 3/4] drm/mediatek: add the mipitx driving control
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen,
eddie.huang, linux-arm-kernel
Add a property in device tree to control the driving by different
board.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++++++++++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++
3 files changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index e4d34484ecc8..e301af64809e 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -125,6 +125,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return ret;
}
+ ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
+ &mipi_tx->mipitx_drive);
+ /* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */
+ if (ret < 0)
+ mipi_tx->mipitx_drive = 4600;
+
+ /* check the mipitx_drive valid */
+ if (mipi_tx->mipitx_drive > 6000 || mipi_tx->mipitx_drive < 3000) {
+ dev_warn(dev, "drive-strength-microamp is invalid %d, not in 3000 ~ 6000\n",
+ mipi_tx->mipitx_drive);
+ mipi_tx->mipitx_drive = clamp_val(mipi_tx->mipitx_drive, 3000,
+ 6000);
+ }
+
ref_clk_name = __clk_get_name(ref_clk);
ret = of_property_read_string(dev->of_node, "clock-output-names",
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
index 413f35d86219..eea44327fe9f 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
@@ -27,6 +27,7 @@ struct mtk_mipi_tx {
struct device *dev;
void __iomem *regs;
u32 data_rate;
+ u32 mipitx_drive;
const struct mtk_mipitx_data *driver_data;
struct clk_hw pll_hw;
struct clk *pll;
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
index 91f08a351fd0..e4cc967750cb 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
@@ -17,6 +17,9 @@
#define RG_DSI_BG_CORE_EN BIT(7)
#define RG_DSI_PAD_TIEL_SEL BIT(8)
+#define MIPITX_VOLTAGE_SEL 0x0010
+#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6)
+
#define MIPITX_PLL_PWR 0x0028
#define MIPITX_PLL_CON0 0x002c
#define MIPITX_PLL_CON1 0x0030
@@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL,
+ RG_DSI_HSTX_LDO_REF_SEL,
+ (mipi_tx->mipitx_drive - 3000) / 200 << 6);
+
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
--
2.21.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 3/4] drm/mediatek: add the mipitx driving control
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen,
eddie.huang, linux-arm-kernel
Add a property in device tree to control the driving by different
board.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++++++++++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++
3 files changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index e4d34484ecc8..e301af64809e 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -125,6 +125,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return ret;
}
+ ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
+ &mipi_tx->mipitx_drive);
+ /* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */
+ if (ret < 0)
+ mipi_tx->mipitx_drive = 4600;
+
+ /* check the mipitx_drive valid */
+ if (mipi_tx->mipitx_drive > 6000 || mipi_tx->mipitx_drive < 3000) {
+ dev_warn(dev, "drive-strength-microamp is invalid %d, not in 3000 ~ 6000\n",
+ mipi_tx->mipitx_drive);
+ mipi_tx->mipitx_drive = clamp_val(mipi_tx->mipitx_drive, 3000,
+ 6000);
+ }
+
ref_clk_name = __clk_get_name(ref_clk);
ret = of_property_read_string(dev->of_node, "clock-output-names",
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
index 413f35d86219..eea44327fe9f 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
@@ -27,6 +27,7 @@ struct mtk_mipi_tx {
struct device *dev;
void __iomem *regs;
u32 data_rate;
+ u32 mipitx_drive;
const struct mtk_mipitx_data *driver_data;
struct clk_hw pll_hw;
struct clk *pll;
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
index 91f08a351fd0..e4cc967750cb 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
@@ -17,6 +17,9 @@
#define RG_DSI_BG_CORE_EN BIT(7)
#define RG_DSI_PAD_TIEL_SEL BIT(8)
+#define MIPITX_VOLTAGE_SEL 0x0010
+#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6)
+
#define MIPITX_PLL_PWR 0x0028
#define MIPITX_PLL_CON0 0x002c
#define MIPITX_PLL_CON1 0x0030
@@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL,
+ RG_DSI_HSTX_LDO_REF_SEL,
+ (mipi_tx->mipitx_drive - 3000) / 200 << 6);
+
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 3/4] drm/mediatek: add the mipitx driving control
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang,
linux-arm-kernel
Add a property in device tree to control the driving by different
board.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++++++++++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++
3 files changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index e4d34484ecc8..e301af64809e 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -125,6 +125,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return ret;
}
+ ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
+ &mipi_tx->mipitx_drive);
+ /* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */
+ if (ret < 0)
+ mipi_tx->mipitx_drive = 4600;
+
+ /* check the mipitx_drive valid */
+ if (mipi_tx->mipitx_drive > 6000 || mipi_tx->mipitx_drive < 3000) {
+ dev_warn(dev, "drive-strength-microamp is invalid %d, not in 3000 ~ 6000\n",
+ mipi_tx->mipitx_drive);
+ mipi_tx->mipitx_drive = clamp_val(mipi_tx->mipitx_drive, 3000,
+ 6000);
+ }
+
ref_clk_name = __clk_get_name(ref_clk);
ret = of_property_read_string(dev->of_node, "clock-output-names",
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
index 413f35d86219..eea44327fe9f 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
@@ -27,6 +27,7 @@ struct mtk_mipi_tx {
struct device *dev;
void __iomem *regs;
u32 data_rate;
+ u32 mipitx_drive;
const struct mtk_mipitx_data *driver_data;
struct clk_hw pll_hw;
struct clk *pll;
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
index 91f08a351fd0..e4cc967750cb 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
@@ -17,6 +17,9 @@
#define RG_DSI_BG_CORE_EN BIT(7)
#define RG_DSI_PAD_TIEL_SEL BIT(8)
+#define MIPITX_VOLTAGE_SEL 0x0010
+#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6)
+
#define MIPITX_PLL_PWR 0x0028
#define MIPITX_PLL_CON0 0x002c
#define MIPITX_PLL_CON1 0x0030
@@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL,
+ RG_DSI_HSTX_LDO_REF_SEL,
+ (mipi_tx->mipitx_drive - 3000) / 200 << 6);
+
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
2020-03-31 8:27 ` Jitao Shi
(?)
(?)
@ 2020-03-31 8:27 ` Jitao Shi
-1 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: linux-mediatek, devicetree, linux-arm-kernel, srv_heupstream,
yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu,
stonea168, huijuan.xie, Jitao Shi
Read calibration data from nvmem, and config mipitx impedance with
calibration data to make sure their impedance are 100ohm.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
index e4cc967750cb..0f87cd3d1d7d 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
@@ -5,6 +5,8 @@
*/
#include "mtk_mipi_tx.h"
+#include <linux/nvmem-consumer.h>
+#include <linux/slab.h>
#define MIPITX_LANE_CON 0x000c
#define RG_DSI_CPHY_T1DRV_EN BIT(0)
@@ -28,6 +30,7 @@
#define MIPITX_PLL_CON4 0x003c
#define RG_DSI_PLL_IBIAS (3 << 10)
+#define MIPITX_D2P_RTCODE 0x0100
#define MIPITX_D2_SW_CTL_EN 0x0144
#define MIPITX_D0_SW_CTL_EN 0x0244
#define MIPITX_CK_CKMODE_EN 0x0328
@@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
.recalc_rate = mtk_mipi_tx_pll_recalc_rate,
};
+static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
+{
+ u32 *buf;
+ u32 rt_code[5];
+ int i, j;
+ struct nvmem_cell *cell;
+ struct device *dev = mipi_tx->dev;
+ size_t len;
+
+ cell = nvmem_cell_get(dev, "calibration-data");
+ if (IS_ERR(cell)) {
+ dev_info(dev, "nvmem_cell_get fail\n");
+ return;
+ }
+
+ buf = (u32 *)nvmem_cell_read(cell, &len);
+
+ nvmem_cell_put(cell);
+
+ if (IS_ERR(buf)) {
+ dev_info(dev, "can't get data\n");
+ return;
+ }
+
+ if (len < 3 * sizeof(u32)) {
+ dev_info(dev, "invalid calibration data\n");
+ kfree(buf);
+ return;
+ }
+
+ rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
+ rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
+ rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
+ rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
+ rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
+
+ for (i = 0; i < 5; i++) {
+ if ((rt_code[i] & 0x1f) == 0)
+ rt_code[i] |= 0x10;
+
+ if ((rt_code[i] >> 5 & 0x1f) == 0)
+ rt_code[i] |= 0x10 << 5;
+
+ for (j = 0; j < 10; j++)
+ mtk_mipi_tx_update_bits(mipi_tx,
+ MIPITX_D2P_RTCODE * (i + 1) + j * 4,
+ 1, rt_code[i] >> j & 1);
+ }
+
+ kfree(buf);
+}
+
static void mtk_mipi_tx_power_on_signal(struct phy *phy)
{
struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
@@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
RG_DSI_HSTX_LDO_REF_SEL,
(mipi_tx->mipitx_drive - 3000) / 200 << 6);
+ mtk_mipi_tx_config_calibration_data(mipi_tx);
+
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
--
2.21.0
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen,
eddie.huang, linux-arm-kernel
Read calibration data from nvmem, and config mipitx impedance with
calibration data to make sure their impedance are 100ohm.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
index e4cc967750cb..0f87cd3d1d7d 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
@@ -5,6 +5,8 @@
*/
#include "mtk_mipi_tx.h"
+#include <linux/nvmem-consumer.h>
+#include <linux/slab.h>
#define MIPITX_LANE_CON 0x000c
#define RG_DSI_CPHY_T1DRV_EN BIT(0)
@@ -28,6 +30,7 @@
#define MIPITX_PLL_CON4 0x003c
#define RG_DSI_PLL_IBIAS (3 << 10)
+#define MIPITX_D2P_RTCODE 0x0100
#define MIPITX_D2_SW_CTL_EN 0x0144
#define MIPITX_D0_SW_CTL_EN 0x0244
#define MIPITX_CK_CKMODE_EN 0x0328
@@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
.recalc_rate = mtk_mipi_tx_pll_recalc_rate,
};
+static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
+{
+ u32 *buf;
+ u32 rt_code[5];
+ int i, j;
+ struct nvmem_cell *cell;
+ struct device *dev = mipi_tx->dev;
+ size_t len;
+
+ cell = nvmem_cell_get(dev, "calibration-data");
+ if (IS_ERR(cell)) {
+ dev_info(dev, "nvmem_cell_get fail\n");
+ return;
+ }
+
+ buf = (u32 *)nvmem_cell_read(cell, &len);
+
+ nvmem_cell_put(cell);
+
+ if (IS_ERR(buf)) {
+ dev_info(dev, "can't get data\n");
+ return;
+ }
+
+ if (len < 3 * sizeof(u32)) {
+ dev_info(dev, "invalid calibration data\n");
+ kfree(buf);
+ return;
+ }
+
+ rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
+ rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
+ rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
+ rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
+ rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
+
+ for (i = 0; i < 5; i++) {
+ if ((rt_code[i] & 0x1f) == 0)
+ rt_code[i] |= 0x10;
+
+ if ((rt_code[i] >> 5 & 0x1f) == 0)
+ rt_code[i] |= 0x10 << 5;
+
+ for (j = 0; j < 10; j++)
+ mtk_mipi_tx_update_bits(mipi_tx,
+ MIPITX_D2P_RTCODE * (i + 1) + j * 4,
+ 1, rt_code[i] >> j & 1);
+ }
+
+ kfree(buf);
+}
+
static void mtk_mipi_tx_power_on_signal(struct phy *phy)
{
struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
@@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
RG_DSI_HSTX_LDO_REF_SEL,
(mipi_tx->mipitx_drive - 3000) / 200 << 6);
+ mtk_mipi_tx_config_calibration_data(mipi_tx);
+
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
--
2.21.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen,
eddie.huang, linux-arm-kernel
Read calibration data from nvmem, and config mipitx impedance with
calibration data to make sure their impedance are 100ohm.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
index e4cc967750cb..0f87cd3d1d7d 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
@@ -5,6 +5,8 @@
*/
#include "mtk_mipi_tx.h"
+#include <linux/nvmem-consumer.h>
+#include <linux/slab.h>
#define MIPITX_LANE_CON 0x000c
#define RG_DSI_CPHY_T1DRV_EN BIT(0)
@@ -28,6 +30,7 @@
#define MIPITX_PLL_CON4 0x003c
#define RG_DSI_PLL_IBIAS (3 << 10)
+#define MIPITX_D2P_RTCODE 0x0100
#define MIPITX_D2_SW_CTL_EN 0x0144
#define MIPITX_D0_SW_CTL_EN 0x0244
#define MIPITX_CK_CKMODE_EN 0x0328
@@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
.recalc_rate = mtk_mipi_tx_pll_recalc_rate,
};
+static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
+{
+ u32 *buf;
+ u32 rt_code[5];
+ int i, j;
+ struct nvmem_cell *cell;
+ struct device *dev = mipi_tx->dev;
+ size_t len;
+
+ cell = nvmem_cell_get(dev, "calibration-data");
+ if (IS_ERR(cell)) {
+ dev_info(dev, "nvmem_cell_get fail\n");
+ return;
+ }
+
+ buf = (u32 *)nvmem_cell_read(cell, &len);
+
+ nvmem_cell_put(cell);
+
+ if (IS_ERR(buf)) {
+ dev_info(dev, "can't get data\n");
+ return;
+ }
+
+ if (len < 3 * sizeof(u32)) {
+ dev_info(dev, "invalid calibration data\n");
+ kfree(buf);
+ return;
+ }
+
+ rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
+ rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
+ rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
+ rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
+ rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
+
+ for (i = 0; i < 5; i++) {
+ if ((rt_code[i] & 0x1f) == 0)
+ rt_code[i] |= 0x10;
+
+ if ((rt_code[i] >> 5 & 0x1f) == 0)
+ rt_code[i] |= 0x10 << 5;
+
+ for (j = 0; j < 10; j++)
+ mtk_mipi_tx_update_bits(mipi_tx,
+ MIPITX_D2P_RTCODE * (i + 1) + j * 4,
+ 1, rt_code[i] >> j & 1);
+ }
+
+ kfree(buf);
+}
+
static void mtk_mipi_tx_power_on_signal(struct phy *phy)
{
struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
@@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
RG_DSI_HSTX_LDO_REF_SEL,
(mipi_tx->mipitx_drive - 3000) / 200 << 6);
+ mtk_mipi_tx_config_calibration_data(mipi_tx);
+
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-03-31 8:27 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-03-31 8:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, dri-devel, linux-kernel
Cc: devicetree, Jitao Shi, srv_heupstream, huijuan.xie, stonea168,
cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang,
linux-arm-kernel
Read calibration data from nvmem, and config mipitx impedance with
calibration data to make sure their impedance are 100ohm.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
index e4cc967750cb..0f87cd3d1d7d 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
@@ -5,6 +5,8 @@
*/
#include "mtk_mipi_tx.h"
+#include <linux/nvmem-consumer.h>
+#include <linux/slab.h>
#define MIPITX_LANE_CON 0x000c
#define RG_DSI_CPHY_T1DRV_EN BIT(0)
@@ -28,6 +30,7 @@
#define MIPITX_PLL_CON4 0x003c
#define RG_DSI_PLL_IBIAS (3 << 10)
+#define MIPITX_D2P_RTCODE 0x0100
#define MIPITX_D2_SW_CTL_EN 0x0144
#define MIPITX_D0_SW_CTL_EN 0x0244
#define MIPITX_CK_CKMODE_EN 0x0328
@@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
.recalc_rate = mtk_mipi_tx_pll_recalc_rate,
};
+static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
+{
+ u32 *buf;
+ u32 rt_code[5];
+ int i, j;
+ struct nvmem_cell *cell;
+ struct device *dev = mipi_tx->dev;
+ size_t len;
+
+ cell = nvmem_cell_get(dev, "calibration-data");
+ if (IS_ERR(cell)) {
+ dev_info(dev, "nvmem_cell_get fail\n");
+ return;
+ }
+
+ buf = (u32 *)nvmem_cell_read(cell, &len);
+
+ nvmem_cell_put(cell);
+
+ if (IS_ERR(buf)) {
+ dev_info(dev, "can't get data\n");
+ return;
+ }
+
+ if (len < 3 * sizeof(u32)) {
+ dev_info(dev, "invalid calibration data\n");
+ kfree(buf);
+ return;
+ }
+
+ rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
+ rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
+ rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
+ rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
+ rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
+
+ for (i = 0; i < 5; i++) {
+ if ((rt_code[i] & 0x1f) == 0)
+ rt_code[i] |= 0x10;
+
+ if ((rt_code[i] >> 5 & 0x1f) == 0)
+ rt_code[i] |= 0x10 << 5;
+
+ for (j = 0; j < 10; j++)
+ mtk_mipi_tx_update_bits(mipi_tx,
+ MIPITX_D2P_RTCODE * (i + 1) + j * 4,
+ 1, rt_code[i] >> j & 1);
+ }
+
+ kfree(buf);
+}
+
static void mtk_mipi_tx_power_on_signal(struct phy *phy)
{
struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
@@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
RG_DSI_HSTX_LDO_REF_SEL,
(mipi_tx->mipitx_drive - 3000) / 200 << 6);
+ mtk_mipi_tx_config_calibration_data(mipi_tx);
+
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
}
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: [PATCH v4 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem
2020-03-31 8:27 ` Jitao Shi
(?)
(?)
@ 2020-04-04 14:19 ` Chun-Kuang Hu
-1 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 14:19 UTC (permalink / raw)
To: Jitao Shi
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, DRI Development, linux-kernel, devicetree,
srv_heupstream, huijuan.xie, stonea168, cawa.cheng,
linux-mediatek, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add properties to get get mipitx calibration data.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index d78b6d6d8fab..8e4729de8c85 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -36,6 +36,9 @@ Required properties:
> Optional properties:
> - drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> the step is 200.
> +- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
> + unspecified default values shall be used.
> +- nvmem-cell-names: Should be "calibration-data"
>
> Example:
>
> @@ -47,6 +50,8 @@ mipi_tx0: mipi-dphy@10215000 {
> #clock-cells = <0>;
> #phy-cells = <0>;
> drive-strength-microamp = <4600>;
> + nvmem-cells= <&mipi_tx_calibration>;
> + nvmem-cell-names = "calibration-data";
> };
>
> dsi0: dsi@1401b000 {
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem
@ 2020-04-04 14:19 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 14:19 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Daniel Vetter,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add properties to get get mipitx calibration data.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index d78b6d6d8fab..8e4729de8c85 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -36,6 +36,9 @@ Required properties:
> Optional properties:
> - drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> the step is 200.
> +- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
> + unspecified default values shall be used.
> +- nvmem-cell-names: Should be "calibration-data"
>
> Example:
>
> @@ -47,6 +50,8 @@ mipi_tx0: mipi-dphy@10215000 {
> #clock-cells = <0>;
> #phy-cells = <0>;
> drive-strength-microamp = <4600>;
> + nvmem-cells= <&mipi_tx_calibration>;
> + nvmem-cell-names = "calibration-data";
> };
>
> dsi0: dsi@1401b000 {
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem
@ 2020-04-04 14:19 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 14:19 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Daniel Vetter,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add properties to get get mipitx calibration data.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index d78b6d6d8fab..8e4729de8c85 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -36,6 +36,9 @@ Required properties:
> Optional properties:
> - drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> the step is 200.
> +- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
> + unspecified default values shall be used.
> +- nvmem-cell-names: Should be "calibration-data"
>
> Example:
>
> @@ -47,6 +50,8 @@ mipi_tx0: mipi-dphy@10215000 {
> #clock-cells = <0>;
> #phy-cells = <0>;
> drive-strength-microamp = <4600>;
> + nvmem-cells= <&mipi_tx_calibration>;
> + nvmem-cell-names = "calibration-data";
> };
>
> dsi0: dsi@1401b000 {
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem
@ 2020-04-04 14:19 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 14:19 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Matthias Brugger,
yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add properties to get get mipitx calibration data.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index d78b6d6d8fab..8e4729de8c85 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -36,6 +36,9 @@ Required properties:
> Optional properties:
> - drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> the step is 200.
> +- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
> + unspecified default values shall be used.
> +- nvmem-cell-names: Should be "calibration-data"
>
> Example:
>
> @@ -47,6 +50,8 @@ mipi_tx0: mipi-dphy@10215000 {
> #clock-cells = <0>;
> #phy-cells = <0>;
> drive-strength-microamp = <4600>;
> + nvmem-cells= <&mipi_tx_calibration>;
> + nvmem-cell-names = "calibration-data";
> };
>
> dsi0: dsi@1401b000 {
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
2020-03-31 8:27 ` Jitao Shi
(?)
(?)
@ 2020-04-04 14:26 ` Chun-Kuang Hu
-1 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 14:26 UTC (permalink / raw)
To: Jitao Shi
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, DRI Development, linux-kernel, devicetree,
srv_heupstream, huijuan.xie, stonea168, cawa.cheng,
linux-mediatek, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Read calibration data from nvmem, and config mipitx impedance with
> calibration data to make sure their impedance are 100ohm.
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> 1 file changed, 57 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> index e4cc967750cb..0f87cd3d1d7d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> @@ -5,6 +5,8 @@
> */
>
> #include "mtk_mipi_tx.h"
> +#include <linux/nvmem-consumer.h>
> +#include <linux/slab.h>
>
> #define MIPITX_LANE_CON 0x000c
> #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> @@ -28,6 +30,7 @@
> #define MIPITX_PLL_CON4 0x003c
> #define RG_DSI_PLL_IBIAS (3 << 10)
>
> +#define MIPITX_D2P_RTCODE 0x0100
> #define MIPITX_D2_SW_CTL_EN 0x0144
> #define MIPITX_D0_SW_CTL_EN 0x0244
> #define MIPITX_CK_CKMODE_EN 0x0328
> @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> };
>
> +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> +{
> + u32 *buf;
> + u32 rt_code[5];
> + int i, j;
> + struct nvmem_cell *cell;
> + struct device *dev = mipi_tx->dev;
> + size_t len;
> +
> + cell = nvmem_cell_get(dev, "calibration-data");
> + if (IS_ERR(cell)) {
> + dev_info(dev, "nvmem_cell_get fail\n");
> + return;
> + }
> +
> + buf = (u32 *)nvmem_cell_read(cell, &len);
> +
> + nvmem_cell_put(cell);
> +
> + if (IS_ERR(buf)) {
> + dev_info(dev, "can't get data\n");
> + return;
> + }
> +
> + if (len < 3 * sizeof(u32)) {
> + dev_info(dev, "invalid calibration data\n");
> + kfree(buf);
> + return;
> + }
> +
> + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
Why not just save rt_code in nvmem and you don't need to translate here?
If you need to do so, please add description for this.
Regards,
Chun-Kuang.
> +
> + for (i = 0; i < 5; i++) {
> + if ((rt_code[i] & 0x1f) == 0)
> + rt_code[i] |= 0x10;
> +
> + if ((rt_code[i] >> 5 & 0x1f) == 0)
> + rt_code[i] |= 0x10 << 5;
> +
> + for (j = 0; j < 10; j++)
> + mtk_mipi_tx_update_bits(mipi_tx,
> + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> + 1, rt_code[i] >> j & 1);
> + }
> +
> + kfree(buf);
> +}
> +
> static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> {
> struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> RG_DSI_HSTX_LDO_REF_SEL,
> (mipi_tx->mipitx_drive - 3000) / 200 << 6);
>
> + mtk_mipi_tx_config_calibration_data(mipi_tx);
> +
> mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> }
>
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-04-04 14:26 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 14:26 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Daniel Vetter,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Read calibration data from nvmem, and config mipitx impedance with
> calibration data to make sure their impedance are 100ohm.
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> 1 file changed, 57 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> index e4cc967750cb..0f87cd3d1d7d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> @@ -5,6 +5,8 @@
> */
>
> #include "mtk_mipi_tx.h"
> +#include <linux/nvmem-consumer.h>
> +#include <linux/slab.h>
>
> #define MIPITX_LANE_CON 0x000c
> #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> @@ -28,6 +30,7 @@
> #define MIPITX_PLL_CON4 0x003c
> #define RG_DSI_PLL_IBIAS (3 << 10)
>
> +#define MIPITX_D2P_RTCODE 0x0100
> #define MIPITX_D2_SW_CTL_EN 0x0144
> #define MIPITX_D0_SW_CTL_EN 0x0244
> #define MIPITX_CK_CKMODE_EN 0x0328
> @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> };
>
> +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> +{
> + u32 *buf;
> + u32 rt_code[5];
> + int i, j;
> + struct nvmem_cell *cell;
> + struct device *dev = mipi_tx->dev;
> + size_t len;
> +
> + cell = nvmem_cell_get(dev, "calibration-data");
> + if (IS_ERR(cell)) {
> + dev_info(dev, "nvmem_cell_get fail\n");
> + return;
> + }
> +
> + buf = (u32 *)nvmem_cell_read(cell, &len);
> +
> + nvmem_cell_put(cell);
> +
> + if (IS_ERR(buf)) {
> + dev_info(dev, "can't get data\n");
> + return;
> + }
> +
> + if (len < 3 * sizeof(u32)) {
> + dev_info(dev, "invalid calibration data\n");
> + kfree(buf);
> + return;
> + }
> +
> + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
Why not just save rt_code in nvmem and you don't need to translate here?
If you need to do so, please add description for this.
Regards,
Chun-Kuang.
> +
> + for (i = 0; i < 5; i++) {
> + if ((rt_code[i] & 0x1f) == 0)
> + rt_code[i] |= 0x10;
> +
> + if ((rt_code[i] >> 5 & 0x1f) == 0)
> + rt_code[i] |= 0x10 << 5;
> +
> + for (j = 0; j < 10; j++)
> + mtk_mipi_tx_update_bits(mipi_tx,
> + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> + 1, rt_code[i] >> j & 1);
> + }
> +
> + kfree(buf);
> +}
> +
> static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> {
> struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> RG_DSI_HSTX_LDO_REF_SEL,
> (mipi_tx->mipitx_drive - 3000) / 200 << 6);
>
> + mtk_mipi_tx_config_calibration_data(mipi_tx);
> +
> mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> }
>
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-04-04 14:26 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 14:26 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Daniel Vetter,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Read calibration data from nvmem, and config mipitx impedance with
> calibration data to make sure their impedance are 100ohm.
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> 1 file changed, 57 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> index e4cc967750cb..0f87cd3d1d7d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> @@ -5,6 +5,8 @@
> */
>
> #include "mtk_mipi_tx.h"
> +#include <linux/nvmem-consumer.h>
> +#include <linux/slab.h>
>
> #define MIPITX_LANE_CON 0x000c
> #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> @@ -28,6 +30,7 @@
> #define MIPITX_PLL_CON4 0x003c
> #define RG_DSI_PLL_IBIAS (3 << 10)
>
> +#define MIPITX_D2P_RTCODE 0x0100
> #define MIPITX_D2_SW_CTL_EN 0x0144
> #define MIPITX_D0_SW_CTL_EN 0x0244
> #define MIPITX_CK_CKMODE_EN 0x0328
> @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> };
>
> +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> +{
> + u32 *buf;
> + u32 rt_code[5];
> + int i, j;
> + struct nvmem_cell *cell;
> + struct device *dev = mipi_tx->dev;
> + size_t len;
> +
> + cell = nvmem_cell_get(dev, "calibration-data");
> + if (IS_ERR(cell)) {
> + dev_info(dev, "nvmem_cell_get fail\n");
> + return;
> + }
> +
> + buf = (u32 *)nvmem_cell_read(cell, &len);
> +
> + nvmem_cell_put(cell);
> +
> + if (IS_ERR(buf)) {
> + dev_info(dev, "can't get data\n");
> + return;
> + }
> +
> + if (len < 3 * sizeof(u32)) {
> + dev_info(dev, "invalid calibration data\n");
> + kfree(buf);
> + return;
> + }
> +
> + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
Why not just save rt_code in nvmem and you don't need to translate here?
If you need to do so, please add description for this.
Regards,
Chun-Kuang.
> +
> + for (i = 0; i < 5; i++) {
> + if ((rt_code[i] & 0x1f) == 0)
> + rt_code[i] |= 0x10;
> +
> + if ((rt_code[i] >> 5 & 0x1f) == 0)
> + rt_code[i] |= 0x10 << 5;
> +
> + for (j = 0; j < 10; j++)
> + mtk_mipi_tx_update_bits(mipi_tx,
> + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> + 1, rt_code[i] >> j & 1);
> + }
> +
> + kfree(buf);
> +}
> +
> static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> {
> struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> RG_DSI_HSTX_LDO_REF_SEL,
> (mipi_tx->mipitx_drive - 3000) / 200 << 6);
>
> + mtk_mipi_tx_config_calibration_data(mipi_tx);
> +
> mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> }
>
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-04-04 14:26 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 14:26 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Matthias Brugger,
yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Read calibration data from nvmem, and config mipitx impedance with
> calibration data to make sure their impedance are 100ohm.
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> 1 file changed, 57 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> index e4cc967750cb..0f87cd3d1d7d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> @@ -5,6 +5,8 @@
> */
>
> #include "mtk_mipi_tx.h"
> +#include <linux/nvmem-consumer.h>
> +#include <linux/slab.h>
>
> #define MIPITX_LANE_CON 0x000c
> #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> @@ -28,6 +30,7 @@
> #define MIPITX_PLL_CON4 0x003c
> #define RG_DSI_PLL_IBIAS (3 << 10)
>
> +#define MIPITX_D2P_RTCODE 0x0100
> #define MIPITX_D2_SW_CTL_EN 0x0144
> #define MIPITX_D0_SW_CTL_EN 0x0244
> #define MIPITX_CK_CKMODE_EN 0x0328
> @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> };
>
> +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> +{
> + u32 *buf;
> + u32 rt_code[5];
> + int i, j;
> + struct nvmem_cell *cell;
> + struct device *dev = mipi_tx->dev;
> + size_t len;
> +
> + cell = nvmem_cell_get(dev, "calibration-data");
> + if (IS_ERR(cell)) {
> + dev_info(dev, "nvmem_cell_get fail\n");
> + return;
> + }
> +
> + buf = (u32 *)nvmem_cell_read(cell, &len);
> +
> + nvmem_cell_put(cell);
> +
> + if (IS_ERR(buf)) {
> + dev_info(dev, "can't get data\n");
> + return;
> + }
> +
> + if (len < 3 * sizeof(u32)) {
> + dev_info(dev, "invalid calibration data\n");
> + kfree(buf);
> + return;
> + }
> +
> + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
Why not just save rt_code in nvmem and you don't need to translate here?
If you need to do so, please add description for this.
Regards,
Chun-Kuang.
> +
> + for (i = 0; i < 5; i++) {
> + if ((rt_code[i] & 0x1f) == 0)
> + rt_code[i] |= 0x10;
> +
> + if ((rt_code[i] >> 5 & 0x1f) == 0)
> + rt_code[i] |= 0x10 << 5;
> +
> + for (j = 0; j < 10; j++)
> + mtk_mipi_tx_update_bits(mipi_tx,
> + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> + 1, rt_code[i] >> j & 1);
> + }
> +
> + kfree(buf);
> +}
> +
> static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> {
> struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> RG_DSI_HSTX_LDO_REF_SEL,
> (mipi_tx->mipitx_drive - 3000) / 200 << 6);
>
> + mtk_mipi_tx_config_calibration_data(mipi_tx);
> +
> mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> }
>
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current
2020-03-31 8:27 ` Jitao Shi
(?)
(?)
@ 2020-04-04 15:45 ` Chun-Kuang Hu
-1 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 15:45 UTC (permalink / raw)
To: Jitao Shi
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, DRI Development, linux-kernel, devicetree,
srv_heupstream, huijuan.xie, stonea168, cawa.cheng,
linux-mediatek, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add a property to control mipi tx drive current:
> "drive-strength-microamp"
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index a19a6cc375ed..d78b6d6d8fab 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -33,6 +33,10 @@ Required properties:
> - #clock-cells: must be <0>;
> - #phy-cells: must be <0>.
>
> +Optional properties:
> +- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> + the step is 200.
> +
> Example:
>
> mipi_tx0: mipi-dphy@10215000 {
> @@ -42,6 +46,7 @@ mipi_tx0: mipi-dphy@10215000 {
> clock-output-names = "mipi_tx0_pll";
> #clock-cells = <0>;
> #phy-cells = <0>;
> + drive-strength-microamp = <4600>;
> };
>
> dsi0: dsi@1401b000 {
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current
@ 2020-04-04 15:45 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 15:45 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Daniel Vetter,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add a property to control mipi tx drive current:
> "drive-strength-microamp"
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index a19a6cc375ed..d78b6d6d8fab 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -33,6 +33,10 @@ Required properties:
> - #clock-cells: must be <0>;
> - #phy-cells: must be <0>.
>
> +Optional properties:
> +- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> + the step is 200.
> +
> Example:
>
> mipi_tx0: mipi-dphy@10215000 {
> @@ -42,6 +46,7 @@ mipi_tx0: mipi-dphy@10215000 {
> clock-output-names = "mipi_tx0_pll";
> #clock-cells = <0>;
> #phy-cells = <0>;
> + drive-strength-microamp = <4600>;
> };
>
> dsi0: dsi@1401b000 {
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current
@ 2020-04-04 15:45 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 15:45 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Daniel Vetter,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add a property to control mipi tx drive current:
> "drive-strength-microamp"
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index a19a6cc375ed..d78b6d6d8fab 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -33,6 +33,10 @@ Required properties:
> - #clock-cells: must be <0>;
> - #phy-cells: must be <0>.
>
> +Optional properties:
> +- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> + the step is 200.
> +
> Example:
>
> mipi_tx0: mipi-dphy@10215000 {
> @@ -42,6 +46,7 @@ mipi_tx0: mipi-dphy@10215000 {
> clock-output-names = "mipi_tx0_pll";
> #clock-cells = <0>;
> #phy-cells = <0>;
> + drive-strength-microamp = <4600>;
> };
>
> dsi0: dsi@1401b000 {
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current
@ 2020-04-04 15:45 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 15:45 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Matthias Brugger,
yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add a property to control mipi tx drive current:
> "drive-strength-microamp"
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index a19a6cc375ed..d78b6d6d8fab 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -33,6 +33,10 @@ Required properties:
> - #clock-cells: must be <0>;
> - #phy-cells: must be <0>.
>
> +Optional properties:
> +- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And
> + the step is 200.
> +
> Example:
>
> mipi_tx0: mipi-dphy@10215000 {
> @@ -42,6 +46,7 @@ mipi_tx0: mipi-dphy@10215000 {
> clock-output-names = "mipi_tx0_pll";
> #clock-cells = <0>;
> #phy-cells = <0>;
> + drive-strength-microamp = <4600>;
> };
>
> dsi0: dsi@1401b000 {
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 3/4] drm/mediatek: add the mipitx driving control
2020-03-31 8:27 ` Jitao Shi
(?)
(?)
@ 2020-04-04 15:46 ` Chun-Kuang Hu
-1 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 15:46 UTC (permalink / raw)
To: Jitao Shi
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, DRI Development, linux-kernel, devicetree,
srv_heupstream, huijuan.xie, stonea168, cawa.cheng,
linux-mediatek, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add a property in device tree to control the driving by different
> board.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++++++++++++
> drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
> drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++
> 3 files changed, 22 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> index e4d34484ecc8..e301af64809e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> @@ -125,6 +125,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
> + &mipi_tx->mipitx_drive);
> + /* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */
> + if (ret < 0)
> + mipi_tx->mipitx_drive = 4600;
> +
> + /* check the mipitx_drive valid */
> + if (mipi_tx->mipitx_drive > 6000 || mipi_tx->mipitx_drive < 3000) {
> + dev_warn(dev, "drive-strength-microamp is invalid %d, not in 3000 ~ 6000\n",
> + mipi_tx->mipitx_drive);
> + mipi_tx->mipitx_drive = clamp_val(mipi_tx->mipitx_drive, 3000,
> + 6000);
> + }
> +
> ref_clk_name = __clk_get_name(ref_clk);
>
> ret = of_property_read_string(dev->of_node, "clock-output-names",
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> index 413f35d86219..eea44327fe9f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> @@ -27,6 +27,7 @@ struct mtk_mipi_tx {
> struct device *dev;
> void __iomem *regs;
> u32 data_rate;
> + u32 mipitx_drive;
> const struct mtk_mipitx_data *driver_data;
> struct clk_hw pll_hw;
> struct clk *pll;
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> index 91f08a351fd0..e4cc967750cb 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> @@ -17,6 +17,9 @@
> #define RG_DSI_BG_CORE_EN BIT(7)
> #define RG_DSI_PAD_TIEL_SEL BIT(8)
>
> +#define MIPITX_VOLTAGE_SEL 0x0010
> +#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6)
> +
> #define MIPITX_PLL_PWR 0x0028
> #define MIPITX_PLL_CON0 0x002c
> #define MIPITX_PLL_CON1 0x0030
> @@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
> mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
>
> + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL,
> + RG_DSI_HSTX_LDO_REF_SEL,
> + (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> +
> mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> }
>
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 3/4] drm/mediatek: add the mipitx driving control
@ 2020-04-04 15:46 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 15:46 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Daniel Vetter,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add a property in device tree to control the driving by different
> board.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++++++++++++
> drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
> drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++
> 3 files changed, 22 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> index e4d34484ecc8..e301af64809e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> @@ -125,6 +125,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
> + &mipi_tx->mipitx_drive);
> + /* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */
> + if (ret < 0)
> + mipi_tx->mipitx_drive = 4600;
> +
> + /* check the mipitx_drive valid */
> + if (mipi_tx->mipitx_drive > 6000 || mipi_tx->mipitx_drive < 3000) {
> + dev_warn(dev, "drive-strength-microamp is invalid %d, not in 3000 ~ 6000\n",
> + mipi_tx->mipitx_drive);
> + mipi_tx->mipitx_drive = clamp_val(mipi_tx->mipitx_drive, 3000,
> + 6000);
> + }
> +
> ref_clk_name = __clk_get_name(ref_clk);
>
> ret = of_property_read_string(dev->of_node, "clock-output-names",
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> index 413f35d86219..eea44327fe9f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> @@ -27,6 +27,7 @@ struct mtk_mipi_tx {
> struct device *dev;
> void __iomem *regs;
> u32 data_rate;
> + u32 mipitx_drive;
> const struct mtk_mipitx_data *driver_data;
> struct clk_hw pll_hw;
> struct clk *pll;
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> index 91f08a351fd0..e4cc967750cb 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> @@ -17,6 +17,9 @@
> #define RG_DSI_BG_CORE_EN BIT(7)
> #define RG_DSI_PAD_TIEL_SEL BIT(8)
>
> +#define MIPITX_VOLTAGE_SEL 0x0010
> +#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6)
> +
> #define MIPITX_PLL_PWR 0x0028
> #define MIPITX_PLL_CON0 0x002c
> #define MIPITX_PLL_CON1 0x0030
> @@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
> mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
>
> + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL,
> + RG_DSI_HSTX_LDO_REF_SEL,
> + (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> +
> mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> }
>
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 3/4] drm/mediatek: add the mipitx driving control
@ 2020-04-04 15:46 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 15:46 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Daniel Vetter,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add a property in device tree to control the driving by different
> board.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++++++++++++
> drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
> drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++
> 3 files changed, 22 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> index e4d34484ecc8..e301af64809e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> @@ -125,6 +125,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
> + &mipi_tx->mipitx_drive);
> + /* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */
> + if (ret < 0)
> + mipi_tx->mipitx_drive = 4600;
> +
> + /* check the mipitx_drive valid */
> + if (mipi_tx->mipitx_drive > 6000 || mipi_tx->mipitx_drive < 3000) {
> + dev_warn(dev, "drive-strength-microamp is invalid %d, not in 3000 ~ 6000\n",
> + mipi_tx->mipitx_drive);
> + mipi_tx->mipitx_drive = clamp_val(mipi_tx->mipitx_drive, 3000,
> + 6000);
> + }
> +
> ref_clk_name = __clk_get_name(ref_clk);
>
> ret = of_property_read_string(dev->of_node, "clock-output-names",
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> index 413f35d86219..eea44327fe9f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> @@ -27,6 +27,7 @@ struct mtk_mipi_tx {
> struct device *dev;
> void __iomem *regs;
> u32 data_rate;
> + u32 mipitx_drive;
> const struct mtk_mipitx_data *driver_data;
> struct clk_hw pll_hw;
> struct clk *pll;
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> index 91f08a351fd0..e4cc967750cb 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> @@ -17,6 +17,9 @@
> #define RG_DSI_BG_CORE_EN BIT(7)
> #define RG_DSI_PAD_TIEL_SEL BIT(8)
>
> +#define MIPITX_VOLTAGE_SEL 0x0010
> +#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6)
> +
> #define MIPITX_PLL_PWR 0x0028
> #define MIPITX_PLL_CON0 0x002c
> #define MIPITX_PLL_CON1 0x0030
> @@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
> mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
>
> + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL,
> + RG_DSI_HSTX_LDO_REF_SEL,
> + (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> +
> mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> }
>
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 3/4] drm/mediatek: add the mipitx driving control
@ 2020-04-04 15:46 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-04 15:46 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Matthias Brugger,
yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
>
> Add a property in device tree to control the driving by different
> board.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 14 ++++++++++++++
> drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
> drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 7 +++++++
> 3 files changed, 22 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> index e4d34484ecc8..e301af64809e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> @@ -125,6 +125,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
> + &mipi_tx->mipitx_drive);
> + /* If can't get the "mipi_tx->mipitx_drive", set it default 0x8 */
> + if (ret < 0)
> + mipi_tx->mipitx_drive = 4600;
> +
> + /* check the mipitx_drive valid */
> + if (mipi_tx->mipitx_drive > 6000 || mipi_tx->mipitx_drive < 3000) {
> + dev_warn(dev, "drive-strength-microamp is invalid %d, not in 3000 ~ 6000\n",
> + mipi_tx->mipitx_drive);
> + mipi_tx->mipitx_drive = clamp_val(mipi_tx->mipitx_drive, 3000,
> + 6000);
> + }
> +
> ref_clk_name = __clk_get_name(ref_clk);
>
> ret = of_property_read_string(dev->of_node, "clock-output-names",
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> index 413f35d86219..eea44327fe9f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> @@ -27,6 +27,7 @@ struct mtk_mipi_tx {
> struct device *dev;
> void __iomem *regs;
> u32 data_rate;
> + u32 mipitx_drive;
> const struct mtk_mipitx_data *driver_data;
> struct clk_hw pll_hw;
> struct clk *pll;
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> index 91f08a351fd0..e4cc967750cb 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> @@ -17,6 +17,9 @@
> #define RG_DSI_BG_CORE_EN BIT(7)
> #define RG_DSI_PAD_TIEL_SEL BIT(8)
>
> +#define MIPITX_VOLTAGE_SEL 0x0010
> +#define RG_DSI_HSTX_LDO_REF_SEL (0xf << 6)
> +
> #define MIPITX_PLL_PWR 0x0028
> #define MIPITX_PLL_CON0 0x002c
> #define MIPITX_PLL_CON1 0x0030
> @@ -123,6 +126,10 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
> mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
>
> + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_VOLTAGE_SEL,
> + RG_DSI_HSTX_LDO_REF_SEL,
> + (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> +
> mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> }
>
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
2020-04-04 14:26 ` Chun-Kuang Hu
(?)
(?)
@ 2020-04-05 13:39 ` Jitao Shi
-1 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-04-05 13:39 UTC (permalink / raw)
To: Chun-Kuang Hu
Cc: Rob Herring, Mark Rutland, Matthias Brugger, Daniel Vetter,
David Airlie, DRI Development, linux-kernel, devicetree,
srv_heupstream, huijuan.xie, stonea168, cawa.cheng,
linux-mediatek, yingjoe.chen, eddie.huang, linux-arm-kernel
On Sat, 2020-04-04 at 22:26 +0800, Chun-Kuang Hu wrote:
> Hi, Jitao:
>
> Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
> >
> > Read calibration data from nvmem, and config mipitx impedance with
> > calibration data to make sure their impedance are 100ohm.
> >
> > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> > 1 file changed, 57 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > index e4cc967750cb..0f87cd3d1d7d 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > @@ -5,6 +5,8 @@
> > */
> >
> > #include "mtk_mipi_tx.h"
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/slab.h>
> >
> > #define MIPITX_LANE_CON 0x000c
> > #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> > @@ -28,6 +30,7 @@
> > #define MIPITX_PLL_CON4 0x003c
> > #define RG_DSI_PLL_IBIAS (3 << 10)
> >
> > +#define MIPITX_D2P_RTCODE 0x0100
> > #define MIPITX_D2_SW_CTL_EN 0x0144
> > #define MIPITX_D0_SW_CTL_EN 0x0244
> > #define MIPITX_CK_CKMODE_EN 0x0328
> > @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> > .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> > };
> >
> > +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> > +{
> > + u32 *buf;
> > + u32 rt_code[5];
> > + int i, j;
> > + struct nvmem_cell *cell;
> > + struct device *dev = mipi_tx->dev;
> > + size_t len;
> > +
> > + cell = nvmem_cell_get(dev, "calibration-data");
> > + if (IS_ERR(cell)) {
> > + dev_info(dev, "nvmem_cell_get fail\n");
> > + return;
> > + }
> > +
> > + buf = (u32 *)nvmem_cell_read(cell, &len);
> > +
> > + nvmem_cell_put(cell);
> > +
> > + if (IS_ERR(buf)) {
> > + dev_info(dev, "can't get data\n");
> > + return;
> > + }
> > +
> > + if (len < 3 * sizeof(u32)) {
> > + dev_info(dev, "invalid calibration data\n");
> > + kfree(buf);
> > + return;
> > + }
> > +
> > + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> > + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> > + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> > + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> > + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
>
> Why not just save rt_code in nvmem and you don't need to translate here?
> If you need to do so, please add description for this.
>
> Regards,
> Chun-Kuang.
>
Hi Chun-Kuang,
The calibration data is flashed in rom when the IC FT test
And the data struct can't be stored again
Best Regards
JItao
>
> > +
> > + for (i = 0; i < 5; i++) {
> > + if ((rt_code[i] & 0x1f) == 0)
> > + rt_code[i] |= 0x10;
> > +
> > + if ((rt_code[i] >> 5 & 0x1f) == 0)
> > + rt_code[i] |= 0x10 << 5;
> > +
> > + for (j = 0; j < 10; j++)
> > + mtk_mipi_tx_update_bits(mipi_tx,
> > + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> > + 1, rt_code[i] >> j & 1);
> > + }
> > +
> > + kfree(buf);
> > +}
> > +
> > static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > {
> > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> > @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > RG_DSI_HSTX_LDO_REF_SEL,
> > (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> >
> > + mtk_mipi_tx_config_calibration_data(mipi_tx);
> > +
> > mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> > }
> >
> > --
> > 2.21.0
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-04-05 13:39 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-04-05 13:39 UTC (permalink / raw)
To: Chun-Kuang Hu
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Daniel Vetter,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
On Sat, 2020-04-04 at 22:26 +0800, Chun-Kuang Hu wrote:
> Hi, Jitao:
>
> Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
> >
> > Read calibration data from nvmem, and config mipitx impedance with
> > calibration data to make sure their impedance are 100ohm.
> >
> > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> > 1 file changed, 57 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > index e4cc967750cb..0f87cd3d1d7d 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > @@ -5,6 +5,8 @@
> > */
> >
> > #include "mtk_mipi_tx.h"
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/slab.h>
> >
> > #define MIPITX_LANE_CON 0x000c
> > #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> > @@ -28,6 +30,7 @@
> > #define MIPITX_PLL_CON4 0x003c
> > #define RG_DSI_PLL_IBIAS (3 << 10)
> >
> > +#define MIPITX_D2P_RTCODE 0x0100
> > #define MIPITX_D2_SW_CTL_EN 0x0144
> > #define MIPITX_D0_SW_CTL_EN 0x0244
> > #define MIPITX_CK_CKMODE_EN 0x0328
> > @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> > .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> > };
> >
> > +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> > +{
> > + u32 *buf;
> > + u32 rt_code[5];
> > + int i, j;
> > + struct nvmem_cell *cell;
> > + struct device *dev = mipi_tx->dev;
> > + size_t len;
> > +
> > + cell = nvmem_cell_get(dev, "calibration-data");
> > + if (IS_ERR(cell)) {
> > + dev_info(dev, "nvmem_cell_get fail\n");
> > + return;
> > + }
> > +
> > + buf = (u32 *)nvmem_cell_read(cell, &len);
> > +
> > + nvmem_cell_put(cell);
> > +
> > + if (IS_ERR(buf)) {
> > + dev_info(dev, "can't get data\n");
> > + return;
> > + }
> > +
> > + if (len < 3 * sizeof(u32)) {
> > + dev_info(dev, "invalid calibration data\n");
> > + kfree(buf);
> > + return;
> > + }
> > +
> > + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> > + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> > + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> > + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> > + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
>
> Why not just save rt_code in nvmem and you don't need to translate here?
> If you need to do so, please add description for this.
>
> Regards,
> Chun-Kuang.
>
Hi Chun-Kuang,
The calibration data is flashed in rom when the IC FT test
And the data struct can't be stored again
Best Regards
JItao
>
> > +
> > + for (i = 0; i < 5; i++) {
> > + if ((rt_code[i] & 0x1f) == 0)
> > + rt_code[i] |= 0x10;
> > +
> > + if ((rt_code[i] >> 5 & 0x1f) == 0)
> > + rt_code[i] |= 0x10 << 5;
> > +
> > + for (j = 0; j < 10; j++)
> > + mtk_mipi_tx_update_bits(mipi_tx,
> > + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> > + 1, rt_code[i] >> j & 1);
> > + }
> > +
> > + kfree(buf);
> > +}
> > +
> > static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > {
> > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> > @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > RG_DSI_HSTX_LDO_REF_SEL,
> > (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> >
> > + mtk_mipi_tx_config_calibration_data(mipi_tx);
> > +
> > mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> > }
> >
> > --
> > 2.21.0
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-04-05 13:39 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-04-05 13:39 UTC (permalink / raw)
To: Chun-Kuang Hu
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Daniel Vetter,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
On Sat, 2020-04-04 at 22:26 +0800, Chun-Kuang Hu wrote:
> Hi, Jitao:
>
> Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
> >
> > Read calibration data from nvmem, and config mipitx impedance with
> > calibration data to make sure their impedance are 100ohm.
> >
> > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> > 1 file changed, 57 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > index e4cc967750cb..0f87cd3d1d7d 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > @@ -5,6 +5,8 @@
> > */
> >
> > #include "mtk_mipi_tx.h"
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/slab.h>
> >
> > #define MIPITX_LANE_CON 0x000c
> > #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> > @@ -28,6 +30,7 @@
> > #define MIPITX_PLL_CON4 0x003c
> > #define RG_DSI_PLL_IBIAS (3 << 10)
> >
> > +#define MIPITX_D2P_RTCODE 0x0100
> > #define MIPITX_D2_SW_CTL_EN 0x0144
> > #define MIPITX_D0_SW_CTL_EN 0x0244
> > #define MIPITX_CK_CKMODE_EN 0x0328
> > @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> > .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> > };
> >
> > +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> > +{
> > + u32 *buf;
> > + u32 rt_code[5];
> > + int i, j;
> > + struct nvmem_cell *cell;
> > + struct device *dev = mipi_tx->dev;
> > + size_t len;
> > +
> > + cell = nvmem_cell_get(dev, "calibration-data");
> > + if (IS_ERR(cell)) {
> > + dev_info(dev, "nvmem_cell_get fail\n");
> > + return;
> > + }
> > +
> > + buf = (u32 *)nvmem_cell_read(cell, &len);
> > +
> > + nvmem_cell_put(cell);
> > +
> > + if (IS_ERR(buf)) {
> > + dev_info(dev, "can't get data\n");
> > + return;
> > + }
> > +
> > + if (len < 3 * sizeof(u32)) {
> > + dev_info(dev, "invalid calibration data\n");
> > + kfree(buf);
> > + return;
> > + }
> > +
> > + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> > + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> > + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> > + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> > + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
>
> Why not just save rt_code in nvmem and you don't need to translate here?
> If you need to do so, please add description for this.
>
> Regards,
> Chun-Kuang.
>
Hi Chun-Kuang,
The calibration data is flashed in rom when the IC FT test
And the data struct can't be stored again
Best Regards
JItao
>
> > +
> > + for (i = 0; i < 5; i++) {
> > + if ((rt_code[i] & 0x1f) == 0)
> > + rt_code[i] |= 0x10;
> > +
> > + if ((rt_code[i] >> 5 & 0x1f) == 0)
> > + rt_code[i] |= 0x10 << 5;
> > +
> > + for (j = 0; j < 10; j++)
> > + mtk_mipi_tx_update_bits(mipi_tx,
> > + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> > + 1, rt_code[i] >> j & 1);
> > + }
> > +
> > + kfree(buf);
> > +}
> > +
> > static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > {
> > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> > @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > RG_DSI_HSTX_LDO_REF_SEL,
> > (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> >
> > + mtk_mipi_tx_config_calibration_data(mipi_tx);
> > +
> > mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> > }
> >
> > --
> > 2.21.0
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-04-05 13:39 ` Jitao Shi
0 siblings, 0 replies; 44+ messages in thread
From: Jitao Shi @ 2020-04-05 13:39 UTC (permalink / raw)
To: Chun-Kuang Hu
Cc: Mark Rutland, devicetree, srv_heupstream, David Airlie,
huijuan.xie, stonea168, linux-kernel, DRI Development,
cawa.cheng, Rob Herring, linux-mediatek, Matthias Brugger,
yingjoe.chen, eddie.huang, linux-arm-kernel
On Sat, 2020-04-04 at 22:26 +0800, Chun-Kuang Hu wrote:
> Hi, Jitao:
>
> Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
> >
> > Read calibration data from nvmem, and config mipitx impedance with
> > calibration data to make sure their impedance are 100ohm.
> >
> > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> > 1 file changed, 57 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > index e4cc967750cb..0f87cd3d1d7d 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > @@ -5,6 +5,8 @@
> > */
> >
> > #include "mtk_mipi_tx.h"
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/slab.h>
> >
> > #define MIPITX_LANE_CON 0x000c
> > #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> > @@ -28,6 +30,7 @@
> > #define MIPITX_PLL_CON4 0x003c
> > #define RG_DSI_PLL_IBIAS (3 << 10)
> >
> > +#define MIPITX_D2P_RTCODE 0x0100
> > #define MIPITX_D2_SW_CTL_EN 0x0144
> > #define MIPITX_D0_SW_CTL_EN 0x0244
> > #define MIPITX_CK_CKMODE_EN 0x0328
> > @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> > .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> > };
> >
> > +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> > +{
> > + u32 *buf;
> > + u32 rt_code[5];
> > + int i, j;
> > + struct nvmem_cell *cell;
> > + struct device *dev = mipi_tx->dev;
> > + size_t len;
> > +
> > + cell = nvmem_cell_get(dev, "calibration-data");
> > + if (IS_ERR(cell)) {
> > + dev_info(dev, "nvmem_cell_get fail\n");
> > + return;
> > + }
> > +
> > + buf = (u32 *)nvmem_cell_read(cell, &len);
> > +
> > + nvmem_cell_put(cell);
> > +
> > + if (IS_ERR(buf)) {
> > + dev_info(dev, "can't get data\n");
> > + return;
> > + }
> > +
> > + if (len < 3 * sizeof(u32)) {
> > + dev_info(dev, "invalid calibration data\n");
> > + kfree(buf);
> > + return;
> > + }
> > +
> > + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> > + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> > + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> > + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> > + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
>
> Why not just save rt_code in nvmem and you don't need to translate here?
> If you need to do so, please add description for this.
>
> Regards,
> Chun-Kuang.
>
Hi Chun-Kuang,
The calibration data is flashed in rom when the IC FT test
And the data struct can't be stored again
Best Regards
JItao
>
> > +
> > + for (i = 0; i < 5; i++) {
> > + if ((rt_code[i] & 0x1f) == 0)
> > + rt_code[i] |= 0x10;
> > +
> > + if ((rt_code[i] >> 5 & 0x1f) == 0)
> > + rt_code[i] |= 0x10 << 5;
> > +
> > + for (j = 0; j < 10; j++)
> > + mtk_mipi_tx_update_bits(mipi_tx,
> > + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> > + 1, rt_code[i] >> j & 1);
> > + }
> > +
> > + kfree(buf);
> > +}
> > +
> > static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > {
> > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> > @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > RG_DSI_HSTX_LDO_REF_SEL,
> > (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> >
> > + mtk_mipi_tx_config_calibration_data(mipi_tx);
> > +
> > mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> > }
> >
> > --
> > 2.21.0
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
2020-04-05 13:39 ` Jitao Shi
(?)
(?)
@ 2020-04-05 16:27 ` Chun-Kuang Hu
-1 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-05 16:27 UTC (permalink / raw)
To: Jitao Shi
Cc: Chun-Kuang Hu, Rob Herring, Mark Rutland, Matthias Brugger,
Daniel Vetter, David Airlie, DRI Development, linux-kernel,
devicetree, srv_heupstream, huijuan.xie, stonea168, cawa.cheng,
linux-mediatek, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年4月5日 週日 下午9:39寫道：
>
>
> On Sat, 2020-04-04 at 22:26 +0800, Chun-Kuang Hu wrote:
> > Hi, Jitao:
> >
> > Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
> > >
> > > Read calibration data from nvmem, and config mipitx impedance with
> > > calibration data to make sure their impedance are 100ohm.
> > >
> > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> > > 1 file changed, 57 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > index e4cc967750cb..0f87cd3d1d7d 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > @@ -5,6 +5,8 @@
> > > */
> > >
> > > #include "mtk_mipi_tx.h"
> > > +#include <linux/nvmem-consumer.h>
> > > +#include <linux/slab.h>
> > >
> > > #define MIPITX_LANE_CON 0x000c
> > > #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> > > @@ -28,6 +30,7 @@
> > > #define MIPITX_PLL_CON4 0x003c
> > > #define RG_DSI_PLL_IBIAS (3 << 10)
> > >
> > > +#define MIPITX_D2P_RTCODE 0x0100
> > > #define MIPITX_D2_SW_CTL_EN 0x0144
> > > #define MIPITX_D0_SW_CTL_EN 0x0244
> > > #define MIPITX_CK_CKMODE_EN 0x0328
> > > @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> > > .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> > > };
> > >
> > > +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> > > +{
> > > + u32 *buf;
> > > + u32 rt_code[5];
> > > + int i, j;
> > > + struct nvmem_cell *cell;
> > > + struct device *dev = mipi_tx->dev;
> > > + size_t len;
> > > +
> > > + cell = nvmem_cell_get(dev, "calibration-data");
> > > + if (IS_ERR(cell)) {
> > > + dev_info(dev, "nvmem_cell_get fail\n");
> > > + return;
> > > + }
> > > +
> > > + buf = (u32 *)nvmem_cell_read(cell, &len);
> > > +
> > > + nvmem_cell_put(cell);
> > > +
> > > + if (IS_ERR(buf)) {
> > > + dev_info(dev, "can't get data\n");
> > > + return;
> > > + }
> > > +
> > > + if (len < 3 * sizeof(u32)) {
> > > + dev_info(dev, "invalid calibration data\n");
> > > + kfree(buf);
> > > + return;
> > > + }
> > > +
> > > + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> > > + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> > > + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> > > + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> > > + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
> >
> > Why not just save rt_code in nvmem and you don't need to translate here?
> > If you need to do so, please add description for this.
> >
> > Regards,
> > Chun-Kuang.
> >
>
> Hi Chun-Kuang,
>
> The calibration data is flashed in rom when the IC FT test
> And the data struct can't be stored again
OK, it looks like this transtation is necessary.
If it's fixed, I would like to get the rt_code when probe or somewhere
initialization.
Regards,
Chun-Kuang.
>
> Best Regards
> JItao
> >
> > > +
> > > + for (i = 0; i < 5; i++) {
> > > + if ((rt_code[i] & 0x1f) == 0)
> > > + rt_code[i] |= 0x10;
> > > +
> > > + if ((rt_code[i] >> 5 & 0x1f) == 0)
> > > + rt_code[i] |= 0x10 << 5;
> > > +
> > > + for (j = 0; j < 10; j++)
> > > + mtk_mipi_tx_update_bits(mipi_tx,
> > > + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> > > + 1, rt_code[i] >> j & 1);
> > > + }
> > > +
> > > + kfree(buf);
> > > +}
> > > +
> > > static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > > {
> > > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> > > @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > > RG_DSI_HSTX_LDO_REF_SEL,
> > > (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> > >
> > > + mtk_mipi_tx_config_calibration_data(mipi_tx);
> > > +
> > > mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> > > }
> > >
> > > --
> > > 2.21.0
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-04-05 16:27 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-05 16:27 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, Chun-Kuang Hu, srv_heupstream, devicetree,
David Airlie, huijuan.xie, stonea168, linux-kernel,
DRI Development, cawa.cheng, Rob Herring, linux-mediatek,
Daniel Vetter, Matthias Brugger, yingjoe.chen, eddie.huang,
linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年4月5日 週日 下午9:39寫道：
>
>
> On Sat, 2020-04-04 at 22:26 +0800, Chun-Kuang Hu wrote:
> > Hi, Jitao:
> >
> > Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
> > >
> > > Read calibration data from nvmem, and config mipitx impedance with
> > > calibration data to make sure their impedance are 100ohm.
> > >
> > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> > > 1 file changed, 57 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > index e4cc967750cb..0f87cd3d1d7d 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > @@ -5,6 +5,8 @@
> > > */
> > >
> > > #include "mtk_mipi_tx.h"
> > > +#include <linux/nvmem-consumer.h>
> > > +#include <linux/slab.h>
> > >
> > > #define MIPITX_LANE_CON 0x000c
> > > #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> > > @@ -28,6 +30,7 @@
> > > #define MIPITX_PLL_CON4 0x003c
> > > #define RG_DSI_PLL_IBIAS (3 << 10)
> > >
> > > +#define MIPITX_D2P_RTCODE 0x0100
> > > #define MIPITX_D2_SW_CTL_EN 0x0144
> > > #define MIPITX_D0_SW_CTL_EN 0x0244
> > > #define MIPITX_CK_CKMODE_EN 0x0328
> > > @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> > > .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> > > };
> > >
> > > +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> > > +{
> > > + u32 *buf;
> > > + u32 rt_code[5];
> > > + int i, j;
> > > + struct nvmem_cell *cell;
> > > + struct device *dev = mipi_tx->dev;
> > > + size_t len;
> > > +
> > > + cell = nvmem_cell_get(dev, "calibration-data");
> > > + if (IS_ERR(cell)) {
> > > + dev_info(dev, "nvmem_cell_get fail\n");
> > > + return;
> > > + }
> > > +
> > > + buf = (u32 *)nvmem_cell_read(cell, &len);
> > > +
> > > + nvmem_cell_put(cell);
> > > +
> > > + if (IS_ERR(buf)) {
> > > + dev_info(dev, "can't get data\n");
> > > + return;
> > > + }
> > > +
> > > + if (len < 3 * sizeof(u32)) {
> > > + dev_info(dev, "invalid calibration data\n");
> > > + kfree(buf);
> > > + return;
> > > + }
> > > +
> > > + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> > > + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> > > + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> > > + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> > > + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
> >
> > Why not just save rt_code in nvmem and you don't need to translate here?
> > If you need to do so, please add description for this.
> >
> > Regards,
> > Chun-Kuang.
> >
>
> Hi Chun-Kuang,
>
> The calibration data is flashed in rom when the IC FT test
> And the data struct can't be stored again
OK, it looks like this transtation is necessary.
If it's fixed, I would like to get the rt_code when probe or somewhere
initialization.
Regards,
Chun-Kuang.
>
> Best Regards
> JItao
> >
> > > +
> > > + for (i = 0; i < 5; i++) {
> > > + if ((rt_code[i] & 0x1f) == 0)
> > > + rt_code[i] |= 0x10;
> > > +
> > > + if ((rt_code[i] >> 5 & 0x1f) == 0)
> > > + rt_code[i] |= 0x10 << 5;
> > > +
> > > + for (j = 0; j < 10; j++)
> > > + mtk_mipi_tx_update_bits(mipi_tx,
> > > + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> > > + 1, rt_code[i] >> j & 1);
> > > + }
> > > +
> > > + kfree(buf);
> > > +}
> > > +
> > > static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > > {
> > > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> > > @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > > RG_DSI_HSTX_LDO_REF_SEL,
> > > (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> > >
> > > + mtk_mipi_tx_config_calibration_data(mipi_tx);
> > > +
> > > mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> > > }
> > >
> > > --
> > > 2.21.0
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-04-05 16:27 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-05 16:27 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, Chun-Kuang Hu, srv_heupstream, devicetree,
David Airlie, huijuan.xie, stonea168, linux-kernel,
DRI Development, cawa.cheng, Rob Herring, linux-mediatek,
Daniel Vetter, Matthias Brugger, yingjoe.chen, eddie.huang,
linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年4月5日 週日 下午9:39寫道：
>
>
> On Sat, 2020-04-04 at 22:26 +0800, Chun-Kuang Hu wrote:
> > Hi, Jitao:
> >
> > Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
> > >
> > > Read calibration data from nvmem, and config mipitx impedance with
> > > calibration data to make sure their impedance are 100ohm.
> > >
> > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> > > 1 file changed, 57 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > index e4cc967750cb..0f87cd3d1d7d 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > @@ -5,6 +5,8 @@
> > > */
> > >
> > > #include "mtk_mipi_tx.h"
> > > +#include <linux/nvmem-consumer.h>
> > > +#include <linux/slab.h>
> > >
> > > #define MIPITX_LANE_CON 0x000c
> > > #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> > > @@ -28,6 +30,7 @@
> > > #define MIPITX_PLL_CON4 0x003c
> > > #define RG_DSI_PLL_IBIAS (3 << 10)
> > >
> > > +#define MIPITX_D2P_RTCODE 0x0100
> > > #define MIPITX_D2_SW_CTL_EN 0x0144
> > > #define MIPITX_D0_SW_CTL_EN 0x0244
> > > #define MIPITX_CK_CKMODE_EN 0x0328
> > > @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> > > .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> > > };
> > >
> > > +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> > > +{
> > > + u32 *buf;
> > > + u32 rt_code[5];
> > > + int i, j;
> > > + struct nvmem_cell *cell;
> > > + struct device *dev = mipi_tx->dev;
> > > + size_t len;
> > > +
> > > + cell = nvmem_cell_get(dev, "calibration-data");
> > > + if (IS_ERR(cell)) {
> > > + dev_info(dev, "nvmem_cell_get fail\n");
> > > + return;
> > > + }
> > > +
> > > + buf = (u32 *)nvmem_cell_read(cell, &len);
> > > +
> > > + nvmem_cell_put(cell);
> > > +
> > > + if (IS_ERR(buf)) {
> > > + dev_info(dev, "can't get data\n");
> > > + return;
> > > + }
> > > +
> > > + if (len < 3 * sizeof(u32)) {
> > > + dev_info(dev, "invalid calibration data\n");
> > > + kfree(buf);
> > > + return;
> > > + }
> > > +
> > > + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> > > + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> > > + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> > > + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> > > + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
> >
> > Why not just save rt_code in nvmem and you don't need to translate here?
> > If you need to do so, please add description for this.
> >
> > Regards,
> > Chun-Kuang.
> >
>
> Hi Chun-Kuang,
>
> The calibration data is flashed in rom when the IC FT test
> And the data struct can't be stored again
OK, it looks like this transtation is necessary.
If it's fixed, I would like to get the rt_code when probe or somewhere
initialization.
Regards,
Chun-Kuang.
>
> Best Regards
> JItao
> >
> > > +
> > > + for (i = 0; i < 5; i++) {
> > > + if ((rt_code[i] & 0x1f) == 0)
> > > + rt_code[i] |= 0x10;
> > > +
> > > + if ((rt_code[i] >> 5 & 0x1f) == 0)
> > > + rt_code[i] |= 0x10 << 5;
> > > +
> > > + for (j = 0; j < 10; j++)
> > > + mtk_mipi_tx_update_bits(mipi_tx,
> > > + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> > > + 1, rt_code[i] >> j & 1);
> > > + }
> > > +
> > > + kfree(buf);
> > > +}
> > > +
> > > static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > > {
> > > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> > > @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > > RG_DSI_HSTX_LDO_REF_SEL,
> > > (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> > >
> > > + mtk_mipi_tx_config_calibration_data(mipi_tx);
> > > +
> > > mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> > > }
> > >
> > > --
> > > 2.21.0
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data
@ 2020-04-05 16:27 ` Chun-Kuang Hu
0 siblings, 0 replies; 44+ messages in thread
From: Chun-Kuang Hu @ 2020-04-05 16:27 UTC (permalink / raw)
To: Jitao Shi
Cc: Mark Rutland, Chun-Kuang Hu, srv_heupstream, devicetree,
David Airlie, huijuan.xie, stonea168, linux-kernel,
DRI Development, cawa.cheng, Rob Herring, linux-mediatek,
Matthias Brugger, yingjoe.chen, eddie.huang, linux-arm-kernel
Hi, Jitao:
Jitao Shi <jitao.shi@mediatek.com> 於 2020年4月5日 週日 下午9:39寫道：
>
>
> On Sat, 2020-04-04 at 22:26 +0800, Chun-Kuang Hu wrote:
> > Hi, Jitao:
> >
> > Jitao Shi <jitao.shi@mediatek.com> 於 2020年3月31日 週二 下午4:28寫道：
> > >
> > > Read calibration data from nvmem, and config mipitx impedance with
> > > calibration data to make sure their impedance are 100ohm.
> > >
> > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
> > > 1 file changed, 57 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > index e4cc967750cb..0f87cd3d1d7d 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> > > @@ -5,6 +5,8 @@
> > > */
> > >
> > > #include "mtk_mipi_tx.h"
> > > +#include <linux/nvmem-consumer.h>
> > > +#include <linux/slab.h>
> > >
> > > #define MIPITX_LANE_CON 0x000c
> > > #define RG_DSI_CPHY_T1DRV_EN BIT(0)
> > > @@ -28,6 +30,7 @@
> > > #define MIPITX_PLL_CON4 0x003c
> > > #define RG_DSI_PLL_IBIAS (3 << 10)
> > >
> > > +#define MIPITX_D2P_RTCODE 0x0100
> > > #define MIPITX_D2_SW_CTL_EN 0x0144
> > > #define MIPITX_D0_SW_CTL_EN 0x0244
> > > #define MIPITX_CK_CKMODE_EN 0x0328
> > > @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
> > > .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> > > };
> > >
> > > +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> > > +{
> > > + u32 *buf;
> > > + u32 rt_code[5];
> > > + int i, j;
> > > + struct nvmem_cell *cell;
> > > + struct device *dev = mipi_tx->dev;
> > > + size_t len;
> > > +
> > > + cell = nvmem_cell_get(dev, "calibration-data");
> > > + if (IS_ERR(cell)) {
> > > + dev_info(dev, "nvmem_cell_get fail\n");
> > > + return;
> > > + }
> > > +
> > > + buf = (u32 *)nvmem_cell_read(cell, &len);
> > > +
> > > + nvmem_cell_put(cell);
> > > +
> > > + if (IS_ERR(buf)) {
> > > + dev_info(dev, "can't get data\n");
> > > + return;
> > > + }
> > > +
> > > + if (len < 3 * sizeof(u32)) {
> > > + dev_info(dev, "invalid calibration data\n");
> > > + kfree(buf);
> > > + return;
> > > + }
> > > +
> > > + rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> > > + rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> > > + rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> > > + rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> > > + rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);
> >
> > Why not just save rt_code in nvmem and you don't need to translate here?
> > If you need to do so, please add description for this.
> >
> > Regards,
> > Chun-Kuang.
> >
>
> Hi Chun-Kuang,
>
> The calibration data is flashed in rom when the IC FT test
> And the data struct can't be stored again
OK, it looks like this transtation is necessary.
If it's fixed, I would like to get the rt_code when probe or somewhere
initialization.
Regards,
Chun-Kuang.
>
> Best Regards
> JItao
> >
> > > +
> > > + for (i = 0; i < 5; i++) {
> > > + if ((rt_code[i] & 0x1f) == 0)
> > > + rt_code[i] |= 0x10;
> > > +
> > > + if ((rt_code[i] >> 5 & 0x1f) == 0)
> > > + rt_code[i] |= 0x10 << 5;
> > > +
> > > + for (j = 0; j < 10; j++)
> > > + mtk_mipi_tx_update_bits(mipi_tx,
> > > + MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> > > + 1, rt_code[i] >> j & 1);
> > > + }
> > > +
> > > + kfree(buf);
> > > +}
> > > +
> > > static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > > {
> > > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> > > @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> > > RG_DSI_HSTX_LDO_REF_SEL,
> > > (mipi_tx->mipitx_drive - 3000) / 200 << 6);
> > >
> > > + mtk_mipi_tx_config_calibration_data(mipi_tx);
> > > +
> > > mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> > > }
> > >
> > > --
> > > 2.21.0
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 44+ messages in thread
end of thread, other threads:[~2020-04-05 16:28 UTC | newest]
Thread overview: 44+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-31 8:27 [PATCH v4 0/4] Config mipi tx current and impedance Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` [PATCH v4 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-04-04 15:45 ` Chun-Kuang Hu
2020-04-04 15:45 ` Chun-Kuang Hu
2020-04-04 15:45 ` Chun-Kuang Hu
2020-04-04 15:45 ` Chun-Kuang Hu
2020-03-31 8:27 ` [PATCH v4 2/4] dt-bindings: display: mediatek: get mipitx calibration data from nvmem Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-04-04 14:19 ` Chun-Kuang Hu
2020-04-04 14:19 ` Chun-Kuang Hu
2020-04-04 14:19 ` Chun-Kuang Hu
2020-04-04 14:19 ` Chun-Kuang Hu
2020-03-31 8:27 ` [PATCH v4 3/4] drm/mediatek: add the mipitx driving control Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-04-04 15:46 ` Chun-Kuang Hu
2020-04-04 15:46 ` Chun-Kuang Hu
2020-04-04 15:46 ` Chun-Kuang Hu
2020-04-04 15:46 ` Chun-Kuang Hu
2020-03-31 8:27 ` [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-03-31 8:27 ` Jitao Shi
2020-04-04 14:26 ` Chun-Kuang Hu
2020-04-04 14:26 ` Chun-Kuang Hu
2020-04-04 14:26 ` Chun-Kuang Hu
2020-04-04 14:26 ` Chun-Kuang Hu
2020-04-05 13:39 ` Jitao Shi
2020-04-05 13:39 ` Jitao Shi
2020-04-05 13:39 ` Jitao Shi
2020-04-05 13:39 ` Jitao Shi
2020-04-05 16:27 ` Chun-Kuang Hu
2020-04-05 16:27 ` Chun-Kuang Hu
2020-04-05 16:27 ` Chun-Kuang Hu
2020-04-05 16:27 ` Chun-Kuang Hu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.