From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6A418C2BA1A for ; Sun, 5 Apr 2020 10:28:36 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 479432072A for ; Sun, 5 Apr 2020 10:28:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726512AbgDEK2f (ORCPT ); Sun, 5 Apr 2020 06:28:35 -0400 Received: from mail.baikalelectronics.com ([87.245.175.226]:39346 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726417AbgDEK2f (ORCPT ); Sun, 5 Apr 2020 06:28:35 -0400 Received: from localhost (unknown [127.0.0.1]) by mail.baikalelectronics.ru (Postfix) with ESMTP id 143448001469; Sun, 5 Apr 2020 10:28:32 +0000 (UTC) X-Virus-Scanned: amavisd-new at baikalelectronics.ru Received: from mail.baikalelectronics.ru ([127.0.0.1]) by localhost (mail.baikalelectronics.ru [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id yvBCia97BFRy; Sun, 5 Apr 2020 13:28:30 +0300 (MSK) Date: Sun, 5 Apr 2020 13:28:51 +0300 From: Sergey Semin To: Rob Herring CC: Michael Turquette , Stephen Boyd , Mark Rutland , Philipp Zabel , Alexey Malahov , Thomas Bogendoerfer , Paul Burton , Ralf Baechle , , , Subject: Re: [PATCH 2/5] dt-bindings: clk: Add Baikal-T1 AXI-bus CCU bindings Message-ID: <20200405102851.36gmlma522gx6j5o@ubsrv2.baikal.int> References: <20200306130048.8868-1-Sergey.Semin@baikalelectronics.ru> <20200306130055.7F70E8030793@mail.baikalelectronics.ru> <20200312205011.GA10607@bogus> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: <20200312205011.GA10607@bogus> X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Mar 12, 2020 at 03:50:11PM -0500, Rob Herring wrote: > On Fri, Mar 06, 2020 at 04:00:45PM +0300, Sergey.Semin@baikalelectronics.ru wrote: > > From: Serge Semin > > > > After being gained by the CCU PLLs the signals must be transformed to > > be suitable for the clock-consumers. This is done by a set of dividers > > embedded into the CCU. A first block of dividers is used to create > > reference clocks for AXI-bus of high-speed peripheral IP-cores of the > > chip. So the AXI-bus CCU dts-node is an ordinary clock-provider with > > standard set of properties supported. But in addition to that each > > AXI-bus clock divider provide a way to reset the corresponding clock > > domain. This makes the AXI-bus CCU dts-node to be also a reset-provider. > > > > Signed-off-by: Serge Semin > > Signed-off-by: Alexey Malahov > > Cc: Thomas Bogendoerfer > > Cc: Paul Burton > > Cc: Ralf Baechle > > --- > > .../bindings/clock/be,bt1-ccu-axi.yaml | 151 ++++++++++++++++++ > > include/dt-bindings/clock/bt1-ccu.h | 13 ++ > > include/dt-bindings/reset/bt1-ccu.h | 23 +++ > > 3 files changed, 187 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/clock/be,bt1-ccu-axi.yaml > > create mode 100644 include/dt-bindings/reset/bt1-ccu.h > > > > diff --git a/Documentation/devicetree/bindings/clock/be,bt1-ccu-axi.yaml b/Documentation/devicetree/bindings/clock/be,bt1-ccu-axi.yaml > > new file mode 100644 > > index 000000000000..6b1eefdead27 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/be,bt1-ccu-axi.yaml > > @@ -0,0 +1,151 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > Dual license new bindings: > > (GPL-2.0-only OR BSD-2-Clause) Ok. > > > +# > > +# Copyright (C) 2019 - 2020 BAIKAL ELECTRONICS, JSC > > +# > > +# Baikal-T1 AXI-bus Clocks Control Unit Device Tree Bindings. > > As Stephen said, drop this. You can keep the copyright, just make it > line 2. Ok. > > > +# > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/clock/be,bt1-ccu-axi.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Baikal-T1 AXI-bus Clock Control Unit > > + > > +maintainers: > > + - Serge Semin > > + > > +description: | > > + Clocks Control Unit is the core of Baikal-T1 SoC responsible for the chip > > + subsystems clocking and resetting. The CCU is connected with an external > > + fixed rate oscillator, which signal is transformed into clocks of various > > + frequencies and then propagated to either individual IP-blocks or to groups > > + of blocks (clock domains). The transformation is done by means of an embedded > > + into CCU PLLs and gateable/non-gateable dividers. Each clock domain can be > > + also individually reset by using the domain clocks divider configuration > > + registers. Baikal-T1 CCU is logically divided into the next components: > > + 1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but > > + in general can provide any frequency supported by the CCU PLLs). > > + 2) PLLs clocks generators (PLLs). > > + 3) AXI-bus clock dividers (AXI) - described in this bindings file. > > + 4) System devices reference clock dividers (SYS). > > + which are connected with each other as shown on the next figure: > > + +---------------+ > > + | Baikal-T1 CCU | > > + | +----+------|- MIPS P5600 cores > > + | +-|PLLs|------|- DDR controller > > + | | +----+ | > > + +----+ | | | | | > > + |XTAL|--|-+ | | +---+-| > > + +----+ | | | +-|AXI|-|- AXI-bus > > + | | | +---+-| > > + | | | | > > + | | +----+---+-|- APB-bus > > + | +-------|SYS|-|- Low-speed Devices > > + | +---+-|- High-speed Devices > > + +---------------+ > > + Each sub-block is represented as a separate dts-node and has an individual > > + driver to be bound with. > > + > > + In order to create signals of wide range frequencies the external oscillator > > + output is primarily connected to a set of CCU PLLs. Some of PLLs CLKOUT are > > + then passed over CCU dividers to create signals required for the target clock > > + domain (like AXI-bus consumers). The dividers have the following structure: > > + +--------------+ > > + CLKIN --|->+----+ 1|\ | > > + SETCLK--|--|/DIV|->| | | > > + CLKDIV--|--| | | |-|->CLKLOUT > > + LOCK----|--+----+ | | | > > + | |/ | > > + | | | > > + EN------|-----------+ | > > + RST-----|--------------|->RSTOUT > > + +--------------+ > > + where CLKIN is the reference clock coming either from a CCU PLL, SETCLK - a > > + command to update the output clock in accordance with a set divider, > > + CLKDIV - clocks divider, LOCK - a signal of the output clock stabilization, > > + EN - enable/disable the divider block, RST/RSTOUT - reset clocks domain > > + signal. Depending on the consumer IP-core peculiarities the dividers may lack > > + of some functionality depicted on the figure above (like EN, > > + CLKDIV/LOCK/SETCLK). In this case the corresponding clock provider just > > + doesn't expose either switching functions, or the rate configuration, or > > + both of them. > > + > > + The CCU AXI dts-node uses the common clock bindings [1] with no custom > > + properties. The list of exported clocks and reset signals can be found in > > + the files: 'dt-bindings/clock/bt1-ccu.h' and 'dt-bindings/reset/bt1-ccu.h'. > > + > > + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt > > + > > +allOf: > > + - $ref: /schemas/clock/clock.yaml# > > Drop this, not needed (clock.yaml is applied to every node). Ok. > > > + > > +properties: > > + compatible: > > + const: be,bt1-ccu-axi > > + > > + reg: > > + description: AXI-bus CCU dividers sub-block base address. > > Don't really need this. Ok, but as I said multiple times in others patchsets reply messages, most likely this property will be removed from the bindings in accordance with an alternative design of the Baikal-T1 System Controller DT node. See the next RFC for details: https://lkml.org/lkml/2020/3/22/393 > > > + maxItems: 1 > > + > > + "#clock-cells": > > + description: | > > + Clocks are referenced by the node phandle and an unique identifier > > + from 'dt-bindings/clock/bt1-ccu.h'. > > + const: 1 > > + > > + "#reset-cells": > > + description: | > > + AXI-bus CCU sub-block provides a reset signal for each clock domain, > > + which unique identifiers are in 'dt-bindings/reset/bt1-ccu.h'. > > + const: 1 > > + > > + clocks: > > + items: > > + - description: CCU SATA PLL output clock. > > + - description: CCU PCIe PLL output clock. > > + - description: CCU Ethernet PLL output clock. > > + > > + clock-names: > > + items: > > + - const: sata_clk > > + - const: pcie_clk > > + - const: eth_clk > > + > > + clock-output-names: true > > + > > + assigned-clocks: true > > + > > + assigned-clock-rates: true > > + > > +additionalProperties: false > > + > > +required: > > + - compatible > > + - reg > > + - "#clock-cells" > > + - clocks > > + - clock-names > > + > > +examples: > > + - | > > + #include > > + > > + ccu_axi: ccu_axi@1F04D030 { > > clock-controller@1f04d030 Ok. > > > + compatible = "be,bt1-ccu-axi"; > > + reg = <0x1F04D030 0x030>; > > + #clock-cells = <1>; > > + #reset-cells = <1>; > > + > > + clocks = <&ccu_pll CCU_SATA_PLL>, > > + <&ccu_pll CCU_PCIE_PLL>, > > + <&ccu_pll CCU_ETH_PLL>; > > + clock-names = "sata_clk", "pcie_clk", "eth_clk"; > > + > > + clock-output-names = "axi_main_clk", "axi_ddr_clk", > > + "axi_sata_clk", "axi_gmac0_clk", > > + "axi_gmac1_clk", "axi_xgmac_clk", > > + "axi_pcie_m_clk", "axi_pcie_s_clk", > > + "axi_usb_clk", "axi_hwa_clk", > > + "axi_sram_clk"; > > + }; > > +... > > diff --git a/include/dt-bindings/clock/bt1-ccu.h b/include/dt-bindings/clock/bt1-ccu.h > > index 86e63162ade0..ebe723c6e0a8 100644 > > --- a/include/dt-bindings/clock/bt1-ccu.h > > +++ b/include/dt-bindings/clock/bt1-ccu.h > > @@ -14,4 +14,17 @@ > > #define CCU_PCIE_PLL 3 > > #define CCU_ETH_PLL 4 > > > > +/* Baikal-T1 AXI-bus CCU Clocks indeces. */ > > +#define CCU_AXI_MAIN_CLK 0 > > +#define CCU_AXI_DDR_CLK 1 > > +#define CCU_AXI_SATA_CLK 2 > > +#define CCU_AXI_GMAC0_CLK 3 > > +#define CCU_AXI_GMAC1_CLK 4 > > +#define CCU_AXI_XGMAC_CLK 5 > > +#define CCU_AXI_PCIE_M_CLK 6 > > +#define CCU_AXI_PCIE_S_CLK 7 > > +#define CCU_AXI_USB_CLK 8 > > +#define CCU_AXI_HWA_CLK 9 > > +#define CCU_AXI_SRAM_CLK 10 > > + > > #endif /* __DT_BINDINGS_CLOCK_BT1_CCU_H */ > > diff --git a/include/dt-bindings/reset/bt1-ccu.h b/include/dt-bindings/reset/bt1-ccu.h > > new file mode 100644 > > index 000000000000..4de5b6bcd433 > > --- /dev/null > > +++ b/include/dt-bindings/reset/bt1-ccu.h > > @@ -0,0 +1,23 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Copyright (C) 2019 BAIKAL ELECTRONICS, JSC > > + * > > + * Baikal-T1 CCU reset indeces. > > + */ > > +#ifndef __DT_BINDINGS_RESET_BT1_CCU_H > > +#define __DT_BINDINGS_RESET_BT1_CCU_H > > + > > +/* Baikal-T1 AXI-bus CCU Reset indeces. */ > > +#define CCU_AXI_MAIN_RST 0 > > +#define CCU_AXI_DDR_RST 1 > > +#define CCU_AXI_SATA_RST 2 > > +#define CCU_AXI_GMAC0_RST 3 > > +#define CCU_AXI_GMAC1_RST 4 > > +#define CCU_AXI_XGMAC_RST 5 > > +#define CCU_AXI_PCIE_M_RST 6 > > +#define CCU_AXI_PCIE_S_RST 7 > > +#define CCU_AXI_USB_RST 8 > > +#define CCU_AXI_HWA_RST 9 > > +#define CCU_AXI_SRAM_RST 10 > > + > > +#endif /* __DT_BINDINGS_RESET_BT1_CCU_H */ > > -- > > 2.25.1 > >