On Mon, Apr 06, 2020 at 08:03:34PM +0200, Clément Péron wrote:
> > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > @@ -253,6 +253,10 @@
> > >                       #address-cells = <1>;
> > >                       #size-cells = <1>;
> > >
> > > +                     speedbin_efuse: speed@1c {
> > > +                             reg = <0x1c 0x4>;
> > > +                     };
> > > +
> >
> > You should order this by address, so after the THS calibration. Also,
> > using a less generic node name than "speed" would be great. What about
> > soc-bin ?
>
> Indeed it's too generic.
> I will keep coherency with i.MX8 and use "cpu_speed_grade"

It works for me, but remember that you can't use underscores :)

Maxime