[PATCH 4.19 000/146] 4.19.116-rc1 review

[PATCH 4.19 000/146] 4.19.116-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.116 release.
There are 146 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 18 Apr 2020 13:11:20 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.116-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.116-rc1

Christian Gmeiner <christian.gmeiner@gmail.com>
    etnaviv: perfmon: fix total and idle HI cyleces readout

Nathan Chancellor <natechancellor@gmail.com>
    misc: echo: Remove unnecessary parentheses and simplify check for zero

Laurentiu Tudor <laurentiu.tudor@nxp.com>
    powerpc/fsl_booke: Avoid creating duplicate tlb1 entry

Masami Hiramatsu <mhiramat@kernel.org>
    ftrace/kprobe: Show the maxactive number on kprobe_events

Chris Wilson <chris@chris-wilson.co.uk>
    drm: Remove PageReserved manipulation from drm_pci_alloc

Lyude Paul <lyude@redhat.com>
    drm/dp_mst: Fix clearing payload state on topology disable

Sasha Levin <sashal@kernel.org>
    Revert "drm/dp_mst: Remove VCPI while disabling topology mgr"

Gilad Ben-Yossef <gilad@benyossef.com>
    crypto: ccree - only try to map auth tag if needed

Gilad Ben-Yossef <gilad@benyossef.com>
    crypto: ccree - dec auth tag size from cryptlen map

Gilad Ben-Yossef <gilad@benyossef.com>
    crypto: ccree - don't mangle the request assoclen

Gilad Ben-Yossef <gilad@benyossef.com>
    crypto: ccree - zero out internal struct before use

Hadar Gat <hadar.gat@arm.com>
    crypto: ccree - improve error handling

Andrei Botila <andrei.botila@nxp.com>
    crypto: caam - update xts sector size for large input length

Bob Liu <bob.liu@oracle.com>
    dm zoned: remove duplicate nr_rnd_zones increase in dmz_init_zone()

Josef Bacik <josef@toxicpanda.com>
    btrfs: use nofs allocations for running delayed items

Clement Courbet <courbet@google.com>
    powerpc: Make setjmp/longjmp signature standard

Segher Boessenkool <segher@kernel.crashing.org>
    powerpc: Add attributes for setjmp/longjmp

Sreekanth Reddy <sreekanth.reddy@broadcom.com>
    scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/kprobes: Ignore traps that happened in real mode

Cédric Le Goater <clg@kaod.org>
    powerpc/xive: Use XIVE_BAD_IRQ instead of zero to catch non configured IPIs

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    powerpc/hash64/devmap: Use H_PAGE_THP_HUGE when setting up huge devmap PTE entries

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/64/tm: Don't let userspace set regs->trap via sigreturn

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/powernv/idle: Restore AMR/UAMOR/AMOR after idle

Juergen Gross <jgross@suse.com>
    xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()

Wen Yang <wenyang@linux.alibaba.com>
    ipmi: fix hung processes in __get_guid()

Kai-Heng Feng <kai.heng.feng@canonical.com>
    libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set

Simon Gander <simon@tuxera.com>
    hfsplus: fix crash and filesystem corruption when deleting files

Oliver O'Halloran <oohall@gmail.com>
    cpufreq: powernv: Fix use-after-free

Eric Biggers <ebiggers@google.com>
    kmod: make request_module() return an error when autoloading is disabled

Paul Cercueil <paul@crapouillou.net>
    clk: ingenic/jz4770: Exit with error if CGU init failed

Hans de Goede <hdegoede@redhat.com>
    Input: i8042 - add Acer Aspire 5738z to nomux list

Michael Mueller <mimu@linux.ibm.com>
    s390/diag: fix display of diagnose call statistics

Sam Lunt <samueljlunt@gmail.com>
    perf tools: Support Python 3.8+ in Makefile

Changwei Ge <chge@linux.alibaba.com>
    ocfs2: no need try to truncate file beyond i_size

Eric Biggers <ebiggers@google.com>
    fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()

Qian Cai <cai@lca.pw>
    ext4: fix a data race at inode->i_blocks

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Fix a page leak in nfs_destroy_unlinked_subrequests()

Libor Pechacek <lpechacek@suse.cz>
    powerpc/pseries: Avoid NULL pointer dereference when drmem is unavailable

Christian Gmeiner <christian.gmeiner@gmail.com>
    drm/etnaviv: rework perfmon query infrastructure

Nathan Chancellor <natechancellor@gmail.com>
    rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGH

Michal Hocko <mhocko@suse.com>
    selftests: vm: drop dependencies on page flags from mlock2 tests

Fredrik Strupe <fredrik@strupe.net>
    arm64: armv8_deprecated: Fix undef_hook mask for thumb setend

Steffen Maier <maier@linux.ibm.com>
    scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-point

Shetty, Harshini X (EXT-Sony Mobile) <Harshini.X.Shetty@sony.com>
    dm verity fec: fix memory leak in verity_fec_dtr

Mikulas Patocka <mpatocka@redhat.com>
    dm writecache: add cond_resched to avoid CPU hangs

Maxime Ripard <maxime@cerno.tech>
    arm64: dts: allwinner: h6: Fix PMU compatible

Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
    net: qualcomm: rmnet: Allow configuration updates to existing devices

Alexander Duyck <alexander.h.duyck@linux.intel.com>
    mm: Use fixed constant in page_frag_alloc instead of size + 1

Anssi Hannula <anssi.hannula@bitwise.fi>
    tools: gpio: Fix out-of-tree build regression

Zhenzhong Duan <zhenzhong.duan@oracle.com>
    x86/speculation: Remove redundant arch_smt_update() invocation

YueHaibing <yuehaibing@huawei.com>
    powerpc/pseries: Drop pointless static qualifier in vpa_debugfs_init()

Gao Xiang <gaoxiang25@huawei.com>
    erofs: correct the remaining shrink objects

Rosioru Dragos <dragos.rosioru@nxp.com>
    crypto: mxs-dcp - fix scatterlist linearization for hash

Robbie Ko <robbieko@synology.com>
    btrfs: fix missing semaphore unlock in btrfs_sync_file

Filipe Manana <fdmanana@suse.com>
    btrfs: fix missing file extent item for hole after ranged fsync

Josef Bacik <josef@toxicpanda.com>
    btrfs: drop block from cache on error in relocation

Josef Bacik <josef@toxicpanda.com>
    btrfs: set update the uuid generation as soon as possible

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix crash during unmount due to race with delayed inode workers

Frieder Schrempf <frieder.schrempf@kontron.de>
    mtd: spinand: Do not erase the block before writing a bad block marker

Frieder Schrempf <frieder.schrempf@kontron.de>
    mtd: spinand: Stop using spinand->oobbuf for buffering bad block markers

Yilu Lin <linyilu@huawei.com>
    CIFS: Fix bug which the return value by asynchronous read is error

Vitaly Kuznetsov <vkuznets@redhat.com>
    KVM: VMX: fix crash cleanup when KVM wasn't used

Sean Christopherson <sean.j.christopherson@intel.com>
    KVM: x86: Gracefully handle __vmalloc() failure during VM allocation

Sean Christopherson <sean.j.christopherson@intel.com>
    KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support

Sean Christopherson <sean.j.christopherson@intel.com>
    KVM: x86: Allocate new rmap and large page tracking when moving memslot

David Hildenbrand <david@redhat.com>
    KVM: s390: vsie: Fix delivery of addressing exceptions

David Hildenbrand <david@redhat.com>
    KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks

Sean Christopherson <sean.j.christopherson@intel.com>
    KVM: nVMX: Properly handle userspace interrupt window request

Thomas Gleixner <tglx@linutronix.de>
    x86/entry/32: Add missing ASM_CLAC to general_protection entry

Eric W. Biederman <ebiederm@xmission.com>
    signal: Extend exec_id to 64bits

Remi Pommarel <repk@triplefau.lt>
    ath9k: Handle txpower changes even when TPC is disabled

Gustavo A. R. Silva <gustavo@embeddedor.com>
    MIPS: OCTEON: irq: Fix potential NULL pointer dereference

Huacai Chen <chenhc@lemote.com>
    MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3

Vasily Averin <vvs@virtuozzo.com>
    pstore: pstore_ftrace_seq_next should increase position index

Sungbo Eo <mans0n@gorani.run>
    irqchip/versatile-fpga: Apply clear-mask earlier

Yang Xu <xuyang2018.jy@cn.fujitsu.com>
    KEYS: reaching the keys quotas correctly

Vasily Averin <vvs@virtuozzo.com>
    tpm: tpm2_bios_measurements_next should increase position index

Vasily Averin <vvs@virtuozzo.com>
    tpm: tpm1_bios_measurements_next should increase position index

Matthew Garrett <matthewgarrett@google.com>
    tpm: Don't make log failures fatal

Kishon Vijay Abraham I <kishon@ti.com>
    PCI: endpoint: Fix for concurrent memory allocation in OB address region

Sean V Kelley <sean.v.kelley@linux.intel.com>
    PCI: Add boot interrupt quirk mechanism for Xeon chipsets

Yicong Yang <yangyicong@hisilicon.com>
    PCI/ASPM: Clear the correct bits when enabling L1 substates

Lukas Wunner <lukas@wunner.de>
    PCI: pciehp: Fix indefinite wait on sysfs requests

James Smart <jsmart2021@gmail.com>
    nvme: Treat discovery subsystems as unique subsystems

James Smart <jsmart2021@gmail.com>
    nvme-fc: Revert "add module to ops template to allow module references"

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n

Jan Engelhardt <jengelh@inai.de>
    acpi/x86: ignore unspecified bit positions in the ACPI global lock field

Benoit Parrot <bparrot@ti.com>
    media: ti-vpe: cal: fix disable_irqs to only the intended target

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek - Add quirk for MSI GL63

Thomas Hebb <tommyhebb@gmail.com>
    ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups

Thomas Hebb <tommyhebb@gmail.com>
    ALSA: hda/realtek - Set principled PC Beep configuration for ALC256

Thomas Hebb <tommyhebb@gmail.com>
    ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: oss: Fix regression by buffer overflow fix

Takashi Iwai <tiwai@suse.de>
    ALSA: ice1724: Fix invalid access for enumerated ctl items

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Fix potential access overflow in beep helper

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Add driver blacklist

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Add mixer workaround for TRX40 and co

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: gadget: composite: Inform controller driver of self-powered

Sriharsha Allenki <sallenki@codeaurora.org>
    usb: gadget: f_fs: Fix use after free issue as part of queue failure

이경택 <gt82.lee@samsung.com>
    ASoC: topology: use name_prefix for new kcontrol

이경택 <gt82.lee@samsung.com>
    ASoC: dpcm: allow start or stop during pause for backend

이경택 <gt82.lee@samsung.com>
    ASoC: dapm: connect virtual mux with default value

이경택 <gt82.lee@samsung.com>
    ASoC: fix regwmask

Kees Cook <keescook@chromium.org>
    slub: improve bit diffusion for freelist ptr obfuscation

Yury Norov <yury.norov@gmail.com>
    uapi: rename ext2_swab() to swab() and share globally in swab.h

Alex Vesker <valex@mellanox.com>
    IB/mlx5: Replace tunnel mpls capability bits for tunnel_offloads

Josef Bacik <josef@toxicpanda.com>
    btrfs: track reloc roots based on their commit root bytenr

Josef Bacik <josef@toxicpanda.com>
    btrfs: remove a BUG_ON() from merge_reloc_roots()

Qu Wenruo <wqu@suse.com>
    btrfs: qgroup: ensure qgroup_rescan_running is only set when the worker is at least queued

Zhiqiang Liu <liuzhiqiang26@huawei.com>
    block, bfq: fix use-after-free in bfq_idle_slice_timer_body

Boqun Feng <boqun.feng@gmail.com>
    locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps()

Junyong Sun <sunjy516@gmail.com>
    firmware: fix a double abort case with fw_load_sysfs_fallback

Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
    md: check arrays is suspended in mddev_detach before call quiesce operations

Marc Zyngier <maz@kernel.org>
    irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependency

Neil Armstrong <narmstrong@baylibre.com>
    usb: dwc3: core: add support for disabling SS instances in park mode

Dongchun Zhu <dongchun.zhu@mediatek.com>
    media: i2c: ov5695: Fix power on and off sequences

Sahitya Tummala <stummala@codeaurora.org>
    block: Fix use-after-free issue accessing struct io_cq

Alexander Sverdlin <alexander.sverdlin@nokia.com>
    genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy()

Ard Biesheuvel <ardb@kernel.org>
    efi/x86: Ignore the memory attributes table on i386

Arvind Sankar <nivedita@alum.mit.edu>
    x86/boot: Use unsigned comparison for addresses

Bob Peterson <rpeterso@redhat.com>
    gfs2: Don't demote a glock until its revokes are written

chenqiwu <chenqiwu@xiaomi.com>
    pstore/platform: fix potential mem leak if pstore_init_fs failed

John Garry <john.garry@huawei.com>
    libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()

Matt Ranostay <matt.ranostay@konsulko.com>
    media: i2c: video-i2c: fix build errors due to 'imply hwmon'

Logan Gunthorpe <logang@deltatee.com>
    PCI/switchtec: Fix init_completion race condition with poll_wait()

Andy Lutomirski <luto@kernel.org>
    selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault

Michael Wang <yun.wang@linux.alibaba.com>
    sched: Avoid scale real weight down to zero

Sungbo Eo <mans0n@gorani.run>
    irqchip/versatile-fpga: Handle chained IRQs properly

Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
    block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices

Thomas Hellstrom <thellstrom@vmware.com>
    x86: Don't let pgprot_modify() change the page encryption bit

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: bail out early if driver can't accress host in resume

Alexey Dobriyan <adobriyan@gmail.com>
    null_blk: fix spurious IO errors after failed past-wp access

Bart Van Assche <bvanassche@acm.org>
    null_blk: Handle null_add_dev() failures properly

Bart Van Assche <bvanassche@acm.org>
    null_blk: Fix the null_add_dev() error path

James Morse <james.morse@arm.com>
    firmware: arm_sdei: fix double-lock on hibernate with shared events

Stephan Gerhold <stephan@gerhold.net>
    media: venus: hfi_parser: Ignore HEVC encoding for V1

Christoph Niedermaier <cniedermaier@dh-electronics.com>
    cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL

Alain Volmat <avolmat@me.com>
    i2c: st: fix missing struct parameter description

Xu Wang <vulab@iscas.ac.cn>
    qlcnic: Fix bad kzalloc null test

Raju Rangoju <rajur@chelsio.com>
    cxgb4/ptp: pass the sign of offset delta in FW CMD

Luo bin <luobin9@huawei.com>
    hinic: fix wrong para of wait_for_completion_timeout

Luo bin <luobin9@huawei.com>
    hinic: fix a bug of waitting for IO stopped

Zheng Wei <wei.zheng@vivo.com>
    net: vxge: fix wrong __VA_ARGS__ usage

David Howells <dhowells@redhat.com>
    rxrpc: Abstract out the calculation of whether there's Tx space

Ondrej Jirman <megous@megous.com>
    bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads

Ondrej Jirman <megous@megous.com>
    ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage


-------------

Diffstat:

 Documentation/sound/hd-audio/index.rst             |   1 +
 Documentation/sound/hd-audio/models.rst            |   2 -
 Documentation/sound/hd-audio/realtek-pc-beep.rst   | 129 ++++++++++++
 Makefile                                           |   4 +-
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts          |   4 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi       |   3 +-
 arch/arm64/kernel/armv8_deprecated.c               |   2 +-
 arch/mips/cavium-octeon/octeon-irq.c               |   3 +
 arch/mips/mm/tlbex.c                               |   5 +-
 arch/powerpc/include/asm/book3s/64/hash-4k.h       |   6 +
 arch/powerpc/include/asm/book3s/64/hash-64k.h      |   8 +-
 arch/powerpc/include/asm/book3s/64/pgtable.h       |   4 +-
 arch/powerpc/include/asm/book3s/64/radix.h         |   5 +
 arch/powerpc/include/asm/drmem.h                   |   4 +-
 arch/powerpc/include/asm/setjmp.h                  |   6 +-
 arch/powerpc/kernel/Makefile                       |   3 -
 arch/powerpc/kernel/idle_book3s.S                  |  27 ++-
 arch/powerpc/kernel/kprobes.c                      |   3 +
 arch/powerpc/kernel/signal_64.c                    |   4 +-
 arch/powerpc/mm/tlb_nohash_low.S                   |  12 +-
 arch/powerpc/platforms/pseries/hotplug-memory.c    |   8 +-
 arch/powerpc/platforms/pseries/lpar.c              |   2 +-
 arch/powerpc/sysdev/xive/common.c                  |  12 +-
 arch/powerpc/sysdev/xive/native.c                  |   4 +-
 arch/powerpc/sysdev/xive/spapr.c                   |   4 +-
 arch/powerpc/sysdev/xive/xive-internal.h           |   7 +
 arch/powerpc/xmon/Makefile                         |   3 -
 arch/s390/kernel/diag.c                            |   2 +-
 arch/s390/kvm/vsie.c                               |   1 +
 arch/s390/mm/gmap.c                                |   6 +-
 arch/x86/boot/compressed/head_32.S                 |   2 +-
 arch/x86/boot/compressed/head_64.S                 |   4 +-
 arch/x86/entry/entry_32.S                          |   1 +
 arch/x86/include/asm/kvm_host.h                    |   2 +-
 arch/x86/include/asm/pgtable.h                     |   7 +-
 arch/x86/include/asm/pgtable_types.h               |   2 +-
 arch/x86/kernel/acpi/boot.c                        |   2 +-
 arch/x86/kvm/svm.c                                 |   4 +
 arch/x86/kvm/vmx.c                                 | 110 ++++------
 arch/x86/kvm/x86.c                                 |  21 +-
 block/bfq-iosched.c                                |  16 +-
 block/blk-ioc.c                                    |   7 +
 block/blk-settings.c                               |   3 +
 drivers/ata/libata-pmp.c                           |   1 +
 drivers/ata/libata-scsi.c                          |   9 +-
 drivers/base/firmware_loader/fallback.c            |   2 +-
 drivers/block/null_blk_main.c                      |  10 +-
 drivers/block/xen-blkfront.c                       |  17 +-
 drivers/bus/sunxi-rsb.c                            |   2 +-
 drivers/char/ipmi/ipmi_msghandler.c                |   4 +-
 drivers/char/tpm/eventlog/common.c                 |  12 +-
 drivers/char/tpm/eventlog/tpm1.c                   |   2 +-
 drivers/char/tpm/eventlog/tpm2.c                   |   2 +-
 drivers/char/tpm/tpm-chip.c                        |   4 +-
 drivers/char/tpm/tpm.h                             |   2 +-
 drivers/clk/ingenic/jz4770-cgu.c                   |   4 +-
 drivers/cpufreq/imx6q-cpufreq.c                    |   3 +
 drivers/cpufreq/powernv-cpufreq.c                  |   6 +
 drivers/crypto/caam/caamalg_desc.c                 |  16 +-
 drivers/crypto/ccree/cc_aead.c                     |  56 +++--
 drivers/crypto/ccree/cc_aead.h                     |   1 +
 drivers/crypto/ccree/cc_buffer_mgr.c               | 108 +++++-----
 drivers/crypto/mxs-dcp.c                           |  58 +++--
 drivers/firmware/arm_sdei.c                        |  32 ++-
 drivers/firmware/efi/efi.c                         |   2 +-
 drivers/gpu/drm/drm_dp_mst_topology.c              |  19 +-
 drivers/gpu/drm/drm_pci.c                          |  25 +--
 drivers/gpu/drm/etnaviv/etnaviv_perfmon.c          | 103 +++++++--
 drivers/i2c/busses/i2c-st.c                        |   1 +
 drivers/infiniband/hw/mlx5/main.c                  |   6 +-
 drivers/input/serio/i8042-x86ia64io.h              |  11 +
 drivers/irqchip/irq-gic-v3-its.c                   |   6 +
 drivers/irqchip/irq-versatile-fpga.c               |  18 +-
 drivers/md/dm-verity-fec.c                         |   1 +
 drivers/md/dm-writecache.c                         |   6 +-
 drivers/md/dm-zoned-metadata.c                     |   1 -
 drivers/md/md.c                                    |   2 +-
 drivers/media/i2c/ov5695.c                         |  49 +++--
 drivers/media/i2c/video-i2c.c                      |   2 +-
 drivers/media/platform/qcom/venus/hfi_parser.c     |   1 +
 drivers/media/platform/ti-vpe/cal.c                |  16 +-
 drivers/misc/echo/echo.c                           |   2 +-
 drivers/mtd/nand/spi/core.c                        |  17 +-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c     |   3 +
 drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c  |   3 +-
 drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c   |  51 +----
 drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c  |   5 +-
 drivers/net/ethernet/neterion/vxge/vxge-config.h   |   2 +-
 drivers/net/ethernet/neterion/vxge/vxge-main.h     |  14 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c  |   2 +-
 drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c |  31 +--
 drivers/net/wireless/ath/ath9k/main.c              |   3 +
 drivers/nvme/host/core.c                           |  11 +
 drivers/nvme/host/fc.c                             |  14 +-
 drivers/nvme/target/fcloop.c                       |   1 -
 drivers/pci/endpoint/pci-epc-mem.c                 |  10 +-
 drivers/pci/hotplug/pciehp_hpc.c                   |  14 +-
 drivers/pci/pcie/aspm.c                            |   4 +-
 drivers/pci/quirks.c                               |  80 ++++++-
 drivers/pci/switch/switchtec.c                     |   2 +-
 drivers/rtc/rtc-omap.c                             |   4 +-
 drivers/s390/scsi/zfcp_erp.c                       |   2 +-
 drivers/scsi/lpfc/lpfc_nvme.c                      |   2 -
 drivers/scsi/mpt3sas/mpt3sas_scsih.c               |   8 +-
 drivers/scsi/qla2xxx/qla_nvme.c                    |   1 -
 drivers/staging/erofs/utils.c                      |   2 +-
 drivers/usb/dwc3/core.c                            |   5 +
 drivers/usb/dwc3/core.h                            |   4 +
 drivers/usb/gadget/composite.c                     |   9 +
 drivers/usb/gadget/function/f_fs.c                 |   1 +
 drivers/usb/host/xhci.c                            |   4 +-
 fs/btrfs/async-thread.c                            |   8 +
 fs/btrfs/async-thread.h                            |   1 +
 fs/btrfs/delayed-inode.c                           |  13 ++
 fs/btrfs/disk-io.c                                 |  27 ++-
 fs/btrfs/file.c                                    |  11 +
 fs/btrfs/qgroup.c                                  |  11 +-
 fs/btrfs/relocation.c                              |  35 ++--
 fs/cifs/file.c                                     |   2 +-
 fs/exec.c                                          |   2 +-
 fs/ext4/inode.c                                    |   2 +-
 fs/filesystems.c                                   |   4 +-
 fs/gfs2/glock.c                                    |   3 +
 fs/hfsplus/attributes.c                            |   4 +
 fs/nfs/write.c                                     |   1 +
 fs/ocfs2/alloc.c                                   |   4 +
 fs/pstore/inode.c                                  |   5 +-
 fs/pstore/platform.c                               |   4 +-
 include/linux/devfreq_cooling.h                    |   2 +-
 include/linux/iocontext.h                          |   1 +
 include/linux/mlx5/mlx5_ifc.h                      |   9 +-
 include/linux/nvme-fc-driver.h                     |   4 -
 include/linux/pci-epc.h                            |   3 +
 include/linux/sched.h                              |   4 +-
 include/linux/swab.h                               |   1 +
 include/uapi/linux/swab.h                          |  10 +
 kernel/cpu.c                                       |   5 +-
 kernel/irq/irqdomain.c                             |  10 +-
 kernel/kmod.c                                      |   4 +-
 kernel/locking/lockdep.c                           |   4 +
 kernel/sched/sched.h                               |   8 +-
 kernel/signal.c                                    |   2 +-
 kernel/trace/trace_kprobe.c                        |   2 +
 lib/find_bit.c                                     |  16 +-
 mm/page_alloc.c                                    |   8 +-
 mm/slub.c                                          |   2 +-
 net/rxrpc/sendmsg.c                                |  27 ++-
 security/keys/key.c                                |   2 +-
 security/keys/keyctl.c                             |   4 +-
 sound/core/oss/pcm_plugin.c                        |  32 ++-
 sound/pci/hda/hda_beep.c                           |   6 +-
 sound/pci/hda/hda_intel.c                          |  16 ++
 sound/pci/hda/patch_realtek.c                      |  50 +----
 sound/pci/ice1712/prodigy_hifi.c                   |   4 +-
 sound/soc/soc-dapm.c                               |   8 +-
 sound/soc/soc-ops.c                                |   4 +-
 sound/soc/soc-pcm.c                                |   6 +-
 sound/soc/soc-topology.c                           |   2 +-
 sound/usb/mixer_maps.c                             |  28 +++
 tools/gpio/Makefile                                |   2 +-
 tools/perf/Makefile.config                         |  11 +-
 tools/testing/selftests/vm/mlock2-tests.c          | 233 ++++-----------------
 tools/testing/selftests/x86/ptrace_syscall.c       |   8 +-
 163 files changed, 1231 insertions(+), 840 deletions(-)

[PATCH 4.19 001/146] ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesnt like such a high voltage

[Greg Kroah-Hartman]

From: Ondrej Jirman <megous@megous.com>

[ Upstream commit a40550952c000667b20082d58077bc647da6c890 ]

Lowering the voltage solves the quick image degradation over time
(minutes), that was probably caused by overheating.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 49547a43cc90a..54cbdaf7ffdcc 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -318,8 +318,8 @@
 };
 
 &reg_dldo3 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
 	regulator-name = "vdd-csi";
 };
 
-- 
2.20.1

[PATCH 4.19 002/146] bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads

[Greg Kroah-Hartman]

From: Ondrej Jirman <megous@megous.com>

[ Upstream commit a43ab30dcd4a1abcdd0d2461bf1cf7c0817f6cd3 ]

When doing a 16-bit read that returns data in the MSB byte, the
RSB_DATA register will keep the MSB byte unchanged when doing
the following 8-bit read. sunxi_rsb_read() will then return
a result that contains high byte from 16-bit read mixed with
the 8-bit result.

The consequence is that after this happens the PMIC's regmap will
look like this: (0x33 is the high byte from the 16-bit read)

% cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers
00: 33
01: 33
02: 33
03: 33
04: 33
05: 33
06: 33
07: 33
08: 33
09: 33
0a: 33
0b: 33
0c: 33
0d: 33
0e: 33
[snip]

Fix this by masking the result of the read with the correct mask
based on the size of the read. There are no 16-bit users in the
mainline kernel, so this doesn't need to get into the stable tree.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/sunxi-rsb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index 1b76d95859027..2ca2cc56bcef6 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -345,7 +345,7 @@ static int sunxi_rsb_read(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr,
 	if (ret)
 		goto unlock;
 
-	*buf = readl(rsb->regs + RSB_DATA);
+	*buf = readl(rsb->regs + RSB_DATA) & GENMASK(len * 8 - 1, 0);
 
 unlock:
 	mutex_unlock(&rsb->lock);
-- 
2.20.1

[PATCH 4.19 003/146] rxrpc: Abstract out the calculation of whether theres Tx space

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 158fe6665389964a1de212818b4a5c52b7f7aff4 ]

Abstract out the calculation of there being sufficient Tx buffer space.
This is reproduced several times in the rxrpc sendmsg code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/sendmsg.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c
index 250d3dae8af4d..7ee72053037a3 100644
--- a/net/rxrpc/sendmsg.c
+++ b/net/rxrpc/sendmsg.c
@@ -21,6 +21,21 @@
 #include <net/af_rxrpc.h>
 #include "ar-internal.h"
 
+/*
+ * Return true if there's sufficient Tx queue space.
+ */
+static bool rxrpc_check_tx_space(struct rxrpc_call *call, rxrpc_seq_t *_tx_win)
+{
+	unsigned int win_size =
+		min_t(unsigned int, call->tx_winsize,
+		      call->cong_cwnd + call->cong_extra);
+	rxrpc_seq_t tx_win = READ_ONCE(call->tx_hard_ack);
+
+	if (_tx_win)
+		*_tx_win = tx_win;
+	return call->tx_top - tx_win < win_size;
+}
+
 /*
  * Wait for space to appear in the Tx queue or a signal to occur.
  */
@@ -30,9 +45,7 @@ static int rxrpc_wait_for_tx_window_intr(struct rxrpc_sock *rx,
 {
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (call->tx_top - call->tx_hard_ack <
-		    min_t(unsigned int, call->tx_winsize,
-			  call->cong_cwnd + call->cong_extra))
+		if (rxrpc_check_tx_space(call, NULL))
 			return 0;
 
 		if (call->state >= RXRPC_CALL_COMPLETE)
@@ -72,9 +85,7 @@ static int rxrpc_wait_for_tx_window_nonintr(struct rxrpc_sock *rx,
 		set_current_state(TASK_UNINTERRUPTIBLE);
 
 		tx_win = READ_ONCE(call->tx_hard_ack);
-		if (call->tx_top - tx_win <
-		    min_t(unsigned int, call->tx_winsize,
-			  call->cong_cwnd + call->cong_extra))
+		if (rxrpc_check_tx_space(call, &tx_win))
 			return 0;
 
 		if (call->state >= RXRPC_CALL_COMPLETE)
@@ -305,9 +316,7 @@ static int rxrpc_send_data(struct rxrpc_sock *rx,
 
 			_debug("alloc");
 
-			if (call->tx_top - call->tx_hard_ack >=
-			    min_t(unsigned int, call->tx_winsize,
-				  call->cong_cwnd + call->cong_extra)) {
+			if (!rxrpc_check_tx_space(call, NULL)) {
 				ret = -EAGAIN;
 				if (msg->msg_flags & MSG_DONTWAIT)
 					goto maybe_error;
-- 
2.20.1

[PATCH 4.19 004/146] net: vxge: fix wrong __VA_ARGS__ usage

[Greg Kroah-Hartman]

From: Zheng Wei <wei.zheng@vivo.com>

[ Upstream commit b317538c47943f9903860d83cc0060409e12d2ff ]

printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix,
it causes a build error when there is no variable
arguments(e.g. only fmt is specified.).

Signed-off-by: Zheng Wei <wei.zheng@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/neterion/vxge/vxge-config.h |  2 +-
 drivers/net/ethernet/neterion/vxge/vxge-main.h   | 14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.h b/drivers/net/ethernet/neterion/vxge/vxge-config.h
index d743a37a3cee8..e5dda2c27f187 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-config.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-config.h
@@ -2065,7 +2065,7 @@ vxge_hw_vpath_strip_fcs_check(struct __vxge_hw_device *hldev, u64 vpath_mask);
 	if ((level >= VXGE_ERR && VXGE_COMPONENT_LL & VXGE_DEBUG_ERR_MASK) ||  \
 	    (level >= VXGE_TRACE && VXGE_COMPONENT_LL & VXGE_DEBUG_TRACE_MASK))\
 		if ((mask & VXGE_DEBUG_MASK) == mask)			       \
-			printk(fmt "\n", __VA_ARGS__);			       \
+			printk(fmt "\n", ##__VA_ARGS__);		       \
 } while (0)
 #else
 #define vxge_debug_ll(level, mask, fmt, ...)
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.h b/drivers/net/ethernet/neterion/vxge/vxge-main.h
index 59a57ff5e96af..9c86f4f9cd424 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.h
@@ -452,49 +452,49 @@ int vxge_fw_upgrade(struct vxgedev *vdev, char *fw_name, int override);
 
 #if (VXGE_DEBUG_LL_CONFIG & VXGE_DEBUG_MASK)
 #define vxge_debug_ll_config(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_LL_CONFIG, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_LL_CONFIG, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_ll_config(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_INIT & VXGE_DEBUG_MASK)
 #define vxge_debug_init(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_INIT, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_INIT, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_init(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_TX & VXGE_DEBUG_MASK)
 #define vxge_debug_tx(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_TX, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_TX, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_tx(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_RX & VXGE_DEBUG_MASK)
 #define vxge_debug_rx(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_RX, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_RX, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_rx(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_MEM & VXGE_DEBUG_MASK)
 #define vxge_debug_mem(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_MEM, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_MEM, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_mem(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)
 #define vxge_debug_entryexit(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_ENTRYEXIT, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_ENTRYEXIT, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_entryexit(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_INTR & VXGE_DEBUG_MASK)
 #define vxge_debug_intr(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_INTR, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_INTR, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_intr(level, fmt, ...)
 #endif
-- 
2.20.1

[PATCH 4.19 005/146] hinic: fix a bug of waitting for IO stopped

[Greg Kroah-Hartman]

From: Luo bin <luobin9@huawei.com>

[ Upstream commit 96758117dc528e6d84bd23d205e8cf7f31eda029 ]

it's unreliable for fw to check whether IO is stopped, so driver
wait for enough time to ensure IO process is done in hw before
freeing resources

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/huawei/hinic/hinic_hw_dev.c  | 51 +------------------
 1 file changed, 2 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
index 9deec13d98e93..4c91c8ceac5f9 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
@@ -370,50 +370,6 @@ static int wait_for_db_state(struct hinic_hwdev *hwdev)
 	return -EFAULT;
 }
 
-static int wait_for_io_stopped(struct hinic_hwdev *hwdev)
-{
-	struct hinic_cmd_io_status cmd_io_status;
-	struct hinic_hwif *hwif = hwdev->hwif;
-	struct pci_dev *pdev = hwif->pdev;
-	struct hinic_pfhwdev *pfhwdev;
-	unsigned long end;
-	u16 out_size;
-	int err;
-
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "Unsupported PCI Function type\n");
-		return -EINVAL;
-	}
-
-	pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
-
-	cmd_io_status.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
-
-	end = jiffies + msecs_to_jiffies(IO_STATUS_TIMEOUT);
-	do {
-		err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM,
-					HINIC_COMM_CMD_IO_STATUS_GET,
-					&cmd_io_status, sizeof(cmd_io_status),
-					&cmd_io_status, &out_size,
-					HINIC_MGMT_MSG_SYNC);
-		if ((err) || (out_size != sizeof(cmd_io_status))) {
-			dev_err(&pdev->dev, "Failed to get IO status, ret = %d\n",
-				err);
-			return err;
-		}
-
-		if (cmd_io_status.status == IO_STOPPED) {
-			dev_info(&pdev->dev, "IO stopped\n");
-			return 0;
-		}
-
-		msleep(20);
-	} while (time_before(jiffies, end));
-
-	dev_err(&pdev->dev, "Wait for IO stopped - Timeout\n");
-	return -ETIMEDOUT;
-}
-
 /**
  * clear_io_resource - set the IO resources as not active in the NIC
  * @hwdev: the NIC HW device
@@ -433,11 +389,8 @@ static int clear_io_resources(struct hinic_hwdev *hwdev)
 		return -EINVAL;
 	}
 
-	err = wait_for_io_stopped(hwdev);
-	if (err) {
-		dev_err(&pdev->dev, "IO has not stopped yet\n");
-		return err;
-	}
+	/* sleep 100ms to wait for firmware stopping I/O */
+	msleep(100);
 
 	cmd_clear_io_res.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
 
-- 
2.20.1

[PATCH 4.19 006/146] hinic: fix wrong para of wait_for_completion_timeout

[Greg Kroah-Hartman]

From: Luo bin <luobin9@huawei.com>

[ Upstream commit 0da7c322f116210ebfdda59c7da663a6fc5e9cc8 ]

the second input parameter of wait_for_completion_timeout should
be jiffies instead of millisecond

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c | 3 ++-
 drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c | 5 +++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
index 4d09ea786b35f..ee715bf785adf 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
@@ -398,7 +398,8 @@ static int cmdq_sync_cmd_direct_resp(struct hinic_cmdq *cmdq,
 
 	spin_unlock_bh(&cmdq->cmdq_lock);
 
-	if (!wait_for_completion_timeout(&done, CMDQ_TIMEOUT)) {
+	if (!wait_for_completion_timeout(&done,
+					 msecs_to_jiffies(CMDQ_TIMEOUT))) {
 		spin_lock_bh(&cmdq->cmdq_lock);
 
 		if (cmdq->errcode[curr_prod_idx] == &errcode)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
index 278dc13f3dae8..9fcf2e5e00039 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
@@ -52,7 +52,7 @@
 
 #define MSG_NOT_RESP                    0xFFFF
 
-#define MGMT_MSG_TIMEOUT                1000
+#define MGMT_MSG_TIMEOUT                5000
 
 #define mgmt_to_pfhwdev(pf_mgmt)        \
 		container_of(pf_mgmt, struct hinic_pfhwdev, pf_to_mgmt)
@@ -276,7 +276,8 @@ static int msg_to_mgmt_sync(struct hinic_pf_to_mgmt *pf_to_mgmt,
 		goto unlock_sync_msg;
 	}
 
-	if (!wait_for_completion_timeout(recv_done, MGMT_MSG_TIMEOUT)) {
+	if (!wait_for_completion_timeout(recv_done,
+					 msecs_to_jiffies(MGMT_MSG_TIMEOUT))) {
 		dev_err(&pdev->dev, "MGMT timeout, MSG id = %d\n", msg_id);
 		err = -ETIMEDOUT;
 		goto unlock_sync_msg;
-- 
2.20.1

[PATCH 4.19 007/146] cxgb4/ptp: pass the sign of offset delta in FW CMD

[Greg Kroah-Hartman]

From: Raju Rangoju <rajur@chelsio.com>

[ Upstream commit 50e0d28d3808146cc19b0d5564ef4ba9e5bf3846 ]

cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta
in FW_PTP_CMD. Fix it by passing correct sign.

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
index 9f9d6cae39d55..758f2b8363282 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
@@ -246,6 +246,9 @@ static int  cxgb4_ptp_fineadjtime(struct adapter *adapter, s64 delta)
 			     FW_PTP_CMD_PORTID_V(0));
 	c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
 	c.u.ts.sc = FW_PTP_SC_ADJ_FTIME;
+	c.u.ts.sign = (delta < 0) ? 1 : 0;
+	if (delta < 0)
+		delta = -delta;
 	c.u.ts.tm = cpu_to_be64(delta);
 
 	err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
-- 
2.20.1

[PATCH 4.19 008/146] qlcnic: Fix bad kzalloc null test

[Greg Kroah-Hartman]

From: Xu Wang <vulab@iscas.ac.cn>

[ Upstream commit bcaeb886ade124331a6f3a5cef34a3f1484c0a03 ]

In qlcnic_83xx_get_reset_instruction_template, the variable
of null test is bad, so correct it.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index 07f9067affc65..cda5b0a9e9489 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -1720,7 +1720,7 @@ static int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *p_d
 
 	ahw->reset.seq_error = 0;
 	ahw->reset.buff = kzalloc(QLC_83XX_RESTART_TEMPLATE_SIZE, GFP_KERNEL);
-	if (p_dev->ahw->reset.buff == NULL)
+	if (ahw->reset.buff == NULL)
 		return -ENOMEM;
 
 	p_buff = p_dev->ahw->reset.buff;
-- 
2.20.1

[PATCH 4.19 009/146] i2c: st: fix missing struct parameter description

[Greg Kroah-Hartman]

From: Alain Volmat <avolmat@me.com>

[ Upstream commit f491c6687332920e296d0209e366fe2ca7eab1c6 ]

Fix a missing struct parameter description to allow
warning free W=1 compilation.

Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-st.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 9e62f893958aa..81158ae8bfe36 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -437,6 +437,7 @@ static void st_i2c_wr_fill_tx_fifo(struct st_i2c_dev *i2c_dev)
 /**
  * st_i2c_rd_fill_tx_fifo() - Fill the Tx FIFO in read mode
  * @i2c_dev: Controller's private data
+ * @max: Maximum amount of data to fill into the Tx FIFO
  *
  * This functions fills the Tx FIFO with fixed pattern when
  * in read mode to trigger clock.
-- 
2.20.1

[PATCH 4.19 010/146] cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL

[Greg Kroah-Hartman]

From: Christoph Niedermaier <cniedermaier@dh-electronics.com>

[ Upstream commit 36eb7dc1bd42fe5f850329c893768ff89b696fba ]

imx6ul_opp_check_speed_grading is called for both i.MX6UL and i.MX6ULL.
Since the i.MX6ULL was introduced to a separate ocotp compatible node
later, it is possible that the i.MX6ULL has also dtbs with
"fsl,imx6ull-ocotp". On a system without nvmem-cell speed grade a
missing check on this node causes a driver fail without considering
the cpu speed grade.

This patch prevents unwanted cpu overclocking on i.MX6ULL with compatible
node "fsl,imx6ull-ocotp" in old dtbs without nvmem-cell speed grade.

Fixes: 2733fb0d0699 ("cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/imx6q-cpufreq.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index d8c3595e90236..a0cbbdfc77359 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -310,6 +310,9 @@ static int imx6ul_opp_check_speed_grading(struct device *dev)
 		void __iomem *base;
 
 		np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp");
+		if (!np)
+			np = of_find_compatible_node(NULL, NULL,
+						     "fsl,imx6ull-ocotp");
 		if (!np)
 			return -ENOENT;
 
-- 
2.20.1

[PATCH 4.19 011/146] media: venus: hfi_parser: Ignore HEVC encoding for V1

[Greg Kroah-Hartman]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit c50cc6dc6c48300af63a6fbc71b647053c15fc80 ]

Some older MSM8916 Venus firmware versions also seem to indicate
support for encoding HEVC, even though they really can't.
This will lead to errors later because hfi_session_init() fails
in this case.

HEVC is already ignored for "dec_codecs", so add the same for
"enc_codecs" to make these old firmware versions work correctly.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/venus/hfi_parser.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/qcom/venus/hfi_parser.c b/drivers/media/platform/qcom/venus/hfi_parser.c
index 2293d936e49ca..7f515a4b9bd12 100644
--- a/drivers/media/platform/qcom/venus/hfi_parser.c
+++ b/drivers/media/platform/qcom/venus/hfi_parser.c
@@ -181,6 +181,7 @@ static void parse_codecs(struct venus_core *core, void *data)
 	if (IS_V1(core)) {
 		core->dec_codecs &= ~HFI_VIDEO_CODEC_HEVC;
 		core->dec_codecs &= ~HFI_VIDEO_CODEC_SPARK;
+		core->enc_codecs &= ~HFI_VIDEO_CODEC_HEVC;
 	}
 }
 
-- 
2.20.1

[PATCH 4.19 012/146] firmware: arm_sdei: fix double-lock on hibernate with shared events

[Greg Kroah-Hartman]

From: James Morse <james.morse@arm.com>

[ Upstream commit 6ded0b61cf638bf9f8efe60ab8ba23db60ea9763 ]

SDEI has private events that must be registered on each CPU. When
CPUs come and go they must re-register and re-enable their private
events. Each event has flags to indicate whether this should happen
to protect against an event being registered on a CPU coming online,
while all the others are unregistering the event.

These flags are protected by the sdei_list_lock spinlock, because
the cpuhp callbacks can't take the mutex.

Hibernate needs to unregister all events, but keep the in-memory
re-register and re-enable as they are. sdei_unregister_shared()
takes the spinlock to walk the list, then calls _sdei_event_unregister()
on each shared event. _sdei_event_unregister() tries to take the
same spinlock to update re-register and re-enable. This doesn't go
so well.

Push the re-register and re-enable updates out to their callers.
sdei_unregister_shared() doesn't want these values updated, so
doesn't need to do anything.

This also fixes shared events getting lost over hibernate as this
path made them look unregistered.

Fixes: da351827240e ("firmware: arm_sdei: Add support for CPU and system power states")
Reported-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_sdei.c | 32 +++++++++++++++-----------------
 1 file changed, 15 insertions(+), 17 deletions(-)

diff --git a/drivers/firmware/arm_sdei.c b/drivers/firmware/arm_sdei.c
index c64c7da738297..05b528c7ed8fd 100644
--- a/drivers/firmware/arm_sdei.c
+++ b/drivers/firmware/arm_sdei.c
@@ -489,11 +489,6 @@ static int _sdei_event_unregister(struct sdei_event *event)
 {
 	lockdep_assert_held(&sdei_events_lock);
 
-	spin_lock(&sdei_list_lock);
-	event->reregister = false;
-	event->reenable = false;
-	spin_unlock(&sdei_list_lock);
-
 	if (event->type == SDEI_EVENT_TYPE_SHARED)
 		return sdei_api_event_unregister(event->event_num);
 
@@ -516,6 +511,11 @@ int sdei_event_unregister(u32 event_num)
 			break;
 		}
 
+		spin_lock(&sdei_list_lock);
+		event->reregister = false;
+		event->reenable = false;
+		spin_unlock(&sdei_list_lock);
+
 		err = _sdei_event_unregister(event);
 		if (err)
 			break;
@@ -583,26 +583,15 @@ static int _sdei_event_register(struct sdei_event *event)
 
 	lockdep_assert_held(&sdei_events_lock);
 
-	spin_lock(&sdei_list_lock);
-	event->reregister = true;
-	spin_unlock(&sdei_list_lock);
-
 	if (event->type == SDEI_EVENT_TYPE_SHARED)
 		return sdei_api_event_register(event->event_num,
 					       sdei_entry_point,
 					       event->registered,
 					       SDEI_EVENT_REGISTER_RM_ANY, 0);
 
-
 	err = sdei_do_cross_call(_local_event_register, event);
-	if (err) {
-		spin_lock(&sdei_list_lock);
-		event->reregister = false;
-		event->reenable = false;
-		spin_unlock(&sdei_list_lock);
-
+	if (err)
 		sdei_do_cross_call(_local_event_unregister, event);
-	}
 
 	return err;
 }
@@ -630,8 +619,17 @@ int sdei_event_register(u32 event_num, sdei_event_callback *cb, void *arg)
 			break;
 		}
 
+		spin_lock(&sdei_list_lock);
+		event->reregister = true;
+		spin_unlock(&sdei_list_lock);
+
 		err = _sdei_event_register(event);
 		if (err) {
+			spin_lock(&sdei_list_lock);
+			event->reregister = false;
+			event->reenable = false;
+			spin_unlock(&sdei_list_lock);
+
 			sdei_event_destroy(event);
 			pr_warn("Failed to register event %u: %d\n", event_num,
 				err);
-- 
2.20.1

[PATCH 4.19 013/146] null_blk: Fix the null_add_dev() error path

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 2004bfdef945fe55196db6b9cdf321fbc75bb0de ]

If null_add_dev() fails, clear dev->nullb.

This patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
Read of size 8 at addr ffff88803280fc30 by task check/8409

Call Trace:
 dump_stack+0xa5/0xe6
 print_address_description.constprop.0+0x26/0x260
 __kasan_report.cold+0x7b/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff370926317
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff2dd2da48 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007ff370926317
RDX: 0000000000000002 RSI: 0000559437ef23f0 RDI: 0000000000000001
RBP: 0000559437ef23f0 R08: 000000000000000a R09: 0000000000000001
R10: 0000559436703471 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ff370a006a0 R14: 00007ff370a014a0 R15: 00007ff370a008a0

Allocated by task 8409:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_kmalloc+0xd/0x10
 kmem_cache_alloc_node_trace+0x129/0x4c0
 null_add_dev+0x24a/0xe90 [null_blk]
 nullb_device_power_store+0x1b6/0x270 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 8409:
 save_stack+0x23/0x90
 __kasan_slab_free+0x112/0x160
 kasan_slab_free+0x12/0x20
 kfree+0xdf/0x250
 null_add_dev+0xaf3/0xe90 [null_blk]
 nullb_device_power_store+0x1b6/0x270 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 2984c8684f96 ("nullb: factor disk parameters")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index c5c0b7c894815..002072429290e 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1844,6 +1844,7 @@ out_cleanup_queues:
 	cleanup_queues(nullb);
 out_free_nullb:
 	kfree(nullb);
+	dev->nullb = NULL;
 out:
 	return rv;
 }
-- 
2.20.1

[PATCH 4.19 014/146] null_blk: Handle null_add_dev() failures properly

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 9b03b713082a31a5b90e0a893c72aa620e255c26 ]

If null_add_dev() fails then null_del_dev() is called with a NULL argument.
Make null_del_dev() handle this scenario correctly. This patch fixes the
following KASAN complaint:

null-ptr-deref in null_del_dev+0x28/0x280 [null_blk]
Read of size 8 at addr 0000000000000000 by task find/1062

Call Trace:
 dump_stack+0xa5/0xe6
 __kasan_report.cold+0x65/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 null_del_dev+0x28/0x280 [null_blk]
 nullb_group_drop_item+0x7e/0xa0 [null_blk]
 client_drop_item+0x53/0x80 [configfs]
 configfs_rmdir+0x395/0x4e0 [configfs]
 vfs_rmdir+0xb6/0x220
 do_rmdir+0x238/0x2c0
 __x64_sys_unlinkat+0x75/0x90
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 002072429290e..78355a0e61db6 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1480,7 +1480,12 @@ static void cleanup_queues(struct nullb *nullb)
 
 static void null_del_dev(struct nullb *nullb)
 {
-	struct nullb_device *dev = nullb->dev;
+	struct nullb_device *dev;
+
+	if (!nullb)
+		return;
+
+	dev = nullb->dev;
 
 	ida_simple_remove(&nullb_indexes, nullb->index);
 
-- 
2.20.1

[PATCH 4.19 015/146] null_blk: fix spurious IO errors after failed past-wp access

[Greg Kroah-Hartman]

From: Alexey Dobriyan <adobriyan@gmail.com>

[ Upstream commit ff77042296d0a54535ddf74412c5ae92cb4ec76a ]

Steps to reproduce:

	BLKRESETZONE zone 0

	// force EIO
	pwrite(fd, buf, 4096, 4096);

	[issue more IO including zone ioctls]

It will start failing randomly including IO to unrelated zones because of
->error "reuse". Trigger can be partition detection as well if test is not
run immediately which is even more entertaining.

The fix is of course to clear ->error where necessary.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 78355a0e61db6..d2d7dc9cd58d2 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -571,6 +571,7 @@ static struct nullb_cmd *__alloc_cmd(struct nullb_queue *nq)
 	if (tag != -1U) {
 		cmd = &nq->cmds[tag];
 		cmd->tag = tag;
+		cmd->error = BLK_STS_OK;
 		cmd->nq = nq;
 		if (nq->dev->irqmode == NULL_IRQ_TIMER) {
 			hrtimer_init(&cmd->timer, CLOCK_MONOTONIC,
@@ -1433,6 +1434,7 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx,
 		cmd->timer.function = null_cmd_timer_expired;
 	}
 	cmd->rq = bd->rq;
+	cmd->error = BLK_STS_OK;
 	cmd->nq = nq;
 
 	blk_mq_start_request(bd->rq);
-- 
2.20.1

[PATCH 4.19 016/146] xhci: bail out early if driver cant accress host in resume

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 72ae194704da212e2ec312ab182a96799d070755 ]

Bail out early if the xHC host needs to be reset at resume
but driver can't access xHC PCI registers.

If xhci driver already fails to reset the controller then there
is no point in attempting to free, re-initialize, re-allocate and
re-start the host. If failure to access the host is detected later,
failing the resume, xhci interrupts will be double freed
when remove is called.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 65cc362717fcb..b4177287d7d0f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1147,8 +1147,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		xhci_dbg(xhci, "Stop HCD\n");
 		xhci_halt(xhci);
 		xhci_zero_64b_regs(xhci);
-		xhci_reset(xhci);
+		retval = xhci_reset(xhci);
 		spin_unlock_irq(&xhci->lock);
+		if (retval)
+			return retval;
 		xhci_cleanup_msix(xhci);
 
 		xhci_dbg(xhci, "// Disabling event ring interrupts\n");
-- 
2.20.1

[PATCH 4.19 017/146] x86: Dont let pgprot_modify() change the page encryption bit

[Greg Kroah-Hartman]

From: Thomas Hellstrom <thellstrom@vmware.com>

[ Upstream commit 6db73f17c5f155dbcfd5e48e621c706270b84df0 ]

When SEV or SME is enabled and active, vm_get_page_prot() typically
returns with the encryption bit set. This means that users of
pgprot_modify(, vm_get_page_prot()) (mprotect_fixup(), do_mmap()) end up
with a value of vma->vm_pg_prot that is not consistent with the intended
protection of the PTEs.

This is also important for fault handlers that rely on the VMA
vm_page_prot to set the page protection. Fix this by not allowing
pgprot_modify() to change the encryption bit, similar to how it's done
for PAT bits.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20200304114527.3636-2-thomas_os@shipmail.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/pgtable.h       | 7 +++++--
 arch/x86/include/asm/pgtable_types.h | 2 +-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 690c0307afed0..2e1ed12c65f82 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -608,12 +608,15 @@ static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 	return __pmd(val);
 }
 
-/* mprotect needs to preserve PAT bits when updating vm_page_prot */
+/*
+ * mprotect needs to preserve PAT and encryption bits when updating
+ * vm_page_prot
+ */
 #define pgprot_modify pgprot_modify
 static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 {
 	pgprotval_t preservebits = pgprot_val(oldprot) & _PAGE_CHG_MASK;
-	pgprotval_t addbits = pgprot_val(newprot);
+	pgprotval_t addbits = pgprot_val(newprot) & ~_PAGE_CHG_MASK;
 	return __pgprot(preservebits | addbits);
 }
 
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 106b7d0e2dae5..71ea49e7db747 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -124,7 +124,7 @@
  */
 #define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
 			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY |	\
-			 _PAGE_SOFT_DIRTY | _PAGE_DEVMAP)
+			 _PAGE_SOFT_DIRTY | _PAGE_DEVMAP | _PAGE_ENC)
 #define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE)
 
 /*
-- 
2.20.1

[PATCH 4.19 018/146] block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices

[Greg Kroah-Hartman]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit e74d93e96d721c4297f2a900ad0191890d2fc2b0 ]

Field bdi->io_pages added in commit 9491ae4aade6 ("mm: don't cap request
size based on read-ahead setting") removes unneeded split of read requests.

Stacked drivers do not call blk_queue_max_hw_sectors(). Instead they set
limits of their devices by blk_set_stacking_limits() + disk_stack_limits().
Field bio->io_pages stays zero until user set max_sectors_kb via sysfs.

This patch updates io_pages after merging limits in disk_stack_limits().

Commit c6d6e9b0f6b4 ("dm: do not allow readahead to limit IO size") fixed
the same problem for device-mapper devices, this one fixes MD RAIDs.

Fixes: 9491ae4aade6 ("mm: don't cap request size based on read-ahead setting")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-settings.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/block/blk-settings.c b/block/blk-settings.c
index be9b39caadbd2..01093b8f3e624 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -717,6 +717,9 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 		printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
 		       top, bottom);
 	}
+
+	t->backing_dev_info->io_pages =
+		t->limits.max_sectors >> (PAGE_SHIFT - 9);
 }
 EXPORT_SYMBOL(disk_stack_limits);
 
-- 
2.20.1

[PATCH 4.19 019/146] irqchip/versatile-fpga: Handle chained IRQs properly

[Greg Kroah-Hartman]

From: Sungbo Eo <mans0n@gorani.run>

[ Upstream commit 486562da598c59e9f835b551d7cf19507de2d681 ]

Enclose the chained handler with chained_irq_{enter,exit}(), so that the
muxed interrupts get properly acked.

This patch also fixes a reboot bug on OX820 SoC, where the jiffies timer
interrupt is never acked. The kernel waits a clock tick forever in
calibrate_delay_converge(), which leads to a boot hang.

Fixes: c41b16f8c9d9 ("ARM: integrator/versatile: consolidate FPGA IRQ handling code")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200319023448.1479701-1-mans0n@gorani.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-versatile-fpga.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c
index 928858dada756..70e2cfff8175f 100644
--- a/drivers/irqchip/irq-versatile-fpga.c
+++ b/drivers/irqchip/irq-versatile-fpga.c
@@ -6,6 +6,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irqchip/versatile-fpga.h>
 #include <linux/irqdomain.h>
 #include <linux/module.h>
@@ -68,12 +69,16 @@ static void fpga_irq_unmask(struct irq_data *d)
 
 static void fpga_irq_handle(struct irq_desc *desc)
 {
+	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct fpga_irq_data *f = irq_desc_get_handler_data(desc);
-	u32 status = readl(f->base + IRQ_STATUS);
+	u32 status;
+
+	chained_irq_enter(chip, desc);
 
+	status = readl(f->base + IRQ_STATUS);
 	if (status == 0) {
 		do_bad_IRQ(desc);
-		return;
+		goto out;
 	}
 
 	do {
@@ -82,6 +87,9 @@ static void fpga_irq_handle(struct irq_desc *desc)
 		status &= ~(1 << irq);
 		generic_handle_irq(irq_find_mapping(f->domain, irq));
 	} while (status);
+
+out:
+	chained_irq_exit(chip, desc);
 }
 
 /*
-- 
2.20.1

[PATCH 4.19 020/146] sched: Avoid scale real weight down to zero

[Greg Kroah-Hartman]

From: Michael Wang <yun.wang@linux.alibaba.com>

[ Upstream commit 26cf52229efc87e2effa9d788f9b33c40fb3358a ]

During our testing, we found a case that shares no longer
working correctly, the cgroup topology is like:

  /sys/fs/cgroup/cpu/A		(shares=102400)
  /sys/fs/cgroup/cpu/A/B	(shares=2)
  /sys/fs/cgroup/cpu/A/B/C	(shares=1024)

  /sys/fs/cgroup/cpu/D		(shares=1024)
  /sys/fs/cgroup/cpu/D/E	(shares=1024)
  /sys/fs/cgroup/cpu/D/E/F	(shares=1024)

The same benchmark is running in group C & F, no other tasks are
running, the benchmark is capable to consumed all the CPUs.

We suppose the group C will win more CPU resources since it could
enjoy all the shares of group A, but it's F who wins much more.

The reason is because we have group B with shares as 2, since
A->cfs_rq.load.weight == B->se.load.weight == B->shares/nr_cpus,
so A->cfs_rq.load.weight become very small.

And in calc_group_shares() we calculate shares as:

  load = max(scale_load_down(cfs_rq->load.weight), cfs_rq->avg.load_avg);
  shares = (tg_shares * load) / tg_weight;

Since the 'cfs_rq->load.weight' is too small, the load become 0
after scale down, although 'tg_shares' is 102400, shares of the se
which stand for group A on root cfs_rq become 2.

While the se of D on root cfs_rq is far more bigger than 2, so it
wins the battle.

Thus when scale_load_down() scale real weight down to 0, it's no
longer telling the real story, the caller will have the wrong
information and the calculation will be buggy.

This patch add check in scale_load_down(), so the real weight will
be >= MIN_SHARES after scale, after applied the group C wins as
expected.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/38e8e212-59a1-64b2-b247-b6d0b52d8dc1@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/sched.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 94bec97bd5e28..5f0eb4565957f 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -123,7 +123,13 @@ static inline void cpu_load_update_active(struct rq *this_rq) { }
 #ifdef CONFIG_64BIT
 # define NICE_0_LOAD_SHIFT	(SCHED_FIXEDPOINT_SHIFT + SCHED_FIXEDPOINT_SHIFT)
 # define scale_load(w)		((w) << SCHED_FIXEDPOINT_SHIFT)
-# define scale_load_down(w)	((w) >> SCHED_FIXEDPOINT_SHIFT)
+# define scale_load_down(w) \
+({ \
+	unsigned long __w = (w); \
+	if (__w) \
+		__w = max(2UL, __w >> SCHED_FIXEDPOINT_SHIFT); \
+	__w; \
+})
 #else
 # define NICE_0_LOAD_SHIFT	(SCHED_FIXEDPOINT_SHIFT)
 # define scale_load(w)		(w)
-- 
2.20.1

[PATCH 4.19 021/146] selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault

[Greg Kroah-Hartman]

From: Andy Lutomirski <luto@kernel.org>

[ Upstream commit 630b99ab60aa972052a4202a1ff96c7e45eb0054 ]

If AT_SYSINFO is not present, don't try to call a NULL pointer.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/faaf688265a7e1a5b944d6f8bc0f6368158306d3.1584052409.git.luto@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/x86/ptrace_syscall.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/x86/ptrace_syscall.c b/tools/testing/selftests/x86/ptrace_syscall.c
index 6f22238f32173..12aaa063196e7 100644
--- a/tools/testing/selftests/x86/ptrace_syscall.c
+++ b/tools/testing/selftests/x86/ptrace_syscall.c
@@ -414,8 +414,12 @@ int main()
 
 #if defined(__i386__) && (!defined(__GLIBC__) || __GLIBC__ > 2 || __GLIBC_MINOR__ >= 16)
 	vsyscall32 = (void *)getauxval(AT_SYSINFO);
-	printf("[RUN]\tCheck AT_SYSINFO return regs\n");
-	test_sys32_regs(do_full_vsyscall32);
+	if (vsyscall32) {
+		printf("[RUN]\tCheck AT_SYSINFO return regs\n");
+		test_sys32_regs(do_full_vsyscall32);
+	} else {
+		printf("[SKIP]\tAT_SYSINFO is not available\n");
+	}
 #endif
 
 	test_ptrace_syscall_restart();
-- 
2.20.1

[PATCH 4.19 022/146] PCI/switchtec: Fix init_completion race condition with poll_wait()

[Greg Kroah-Hartman]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit efbdc769601f4d50018bf7ca50fc9f7c67392ece ]

The call to init_completion() in mrpc_queue_cmd() can theoretically
race with the call to poll_wait() in switchtec_dev_poll().

  poll()			write()
    switchtec_dev_poll()   	  switchtec_dev_write()
      poll_wait(&s->comp.wait);      mrpc_queue_cmd()
			               init_completion(&s->comp)
				         init_waitqueue_head(&s->comp.wait)

To my knowledge, no one has hit this bug.

Fix this by using reinit_completion() instead of init_completion() in
mrpc_queue_cmd().

Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver")

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lkml.kernel.org/r/20200313183608.2646-1-logang@deltatee.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/switch/switchtec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 43431816412c1..291c0074ad6f4 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -147,7 +147,7 @@ static int mrpc_queue_cmd(struct switchtec_user *stuser)
 	kref_get(&stuser->kref);
 	stuser->read_len = sizeof(stuser->data);
 	stuser_set_state(stuser, MRPC_QUEUED);
-	init_completion(&stuser->comp);
+	reinit_completion(&stuser->comp);
 	list_add_tail(&stuser->list, &stdev->mrpc_queue);
 
 	mrpc_cmd_submit(stdev);
-- 
2.20.1

[PATCH 4.19 023/146] media: i2c: video-i2c: fix build errors due to imply hwmon

[Greg Kroah-Hartman]

From: Matt Ranostay <matt.ranostay@konsulko.com>

[ Upstream commit 64d4fc9926f09861a35d8f0f7d81f056e6d5af7b ]

Fix build fault when CONFIG_HWMON is a module, and CONFIG_VIDEO_I2C
as builtin. This is due to 'imply hwmon' in the respective Kconfig.

Issue build log:

ld: drivers/media/i2c/video-i2c.o: in function `amg88xx_hwmon_init':
video-i2c.c:(.text+0x2e1): undefined reference to `devm_hwmon_device_register_with_info

Cc: rdunlap@infradead.org
Fixes: acbea6798955 (media: video-i2c: add hwmon support for amg88xx)
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/video-i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/video-i2c.c b/drivers/media/i2c/video-i2c.c
index f27d294dcbef5..dd50acc085d89 100644
--- a/drivers/media/i2c/video-i2c.c
+++ b/drivers/media/i2c/video-i2c.c
@@ -105,7 +105,7 @@ static int amg88xx_xfer(struct video_i2c_data *data, char *buf)
 	return (ret == 2) ? 0 : -EIO;
 }
 
-#if IS_ENABLED(CONFIG_HWMON)
+#if IS_REACHABLE(CONFIG_HWMON)
 
 static const u32 amg88xx_temp_config[] = {
 	HWMON_T_INPUT,
-- 
2.20.1

[PATCH 4.19 024/146] libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()

[Greg Kroah-Hartman]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 1d72f7aec3595249dbb83291ccac041a2d676c57 ]

If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails,
then we may get use-after-free KASAN warns:

==================================================================
BUG: KASAN: use-after-free in kobject_put+0x24/0x180
Read of size 1 at addr ffff0026b8c80364 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         5.6.0-rc3-00004-g5a71b206ea82-dirty #1765
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020
Call trace:
dump_backtrace+0x0/0x298
show_stack+0x14/0x20
dump_stack+0x118/0x190
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x134/0x23c
kasan_report+0xc/0x18
__asan_load1+0x5c/0x68
kobject_put+0x24/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_devres_release+0x74/0xb0
release_nodes+0x2d0/0x470
devres_release_all+0x50/0x78
really_probe+0x2d4/0x560
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa8/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x220/0x2e0
driver_register+0xbc/0x1d0
__pci_register_driver+0xbc/0xd0
ahci_pci_driver_init+0x20/0x28
do_one_initcall+0xf0/0x608
kernel_init_freeable+0x31c/0x384
kernel_init+0x10/0x118
ret_from_fork+0x10/0x18

Allocated by task 5:
save_stack+0x28/0xc8
__kasan_kmalloc.isra.8+0xbc/0xd8
kasan_kmalloc+0xc/0x18
__kmalloc+0x1a8/0x280
scsi_host_alloc+0x44/0x678
ata_scsi_add_hosts+0x74/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

Freed by task 5:
save_stack+0x28/0xc8
__kasan_slab_free+0x118/0x180
kasan_slab_free+0x10/0x18
slab_free_freelist_hook+0xa4/0x1a0
kfree+0xd4/0x3a0
scsi_host_dev_release+0x100/0x148
device_release+0x7c/0xe0
kobject_put+0xb0/0x180
put_device+0x10/0x20
scsi_host_put+0x10/0x18
ata_scsi_add_hosts+0x210/0x268
ata_host_register+0x228/0x488
ahci_host_activate+0x1c4/0x2a8
ahci_init_one+0xd18/0x1298
local_pci_probe+0x74/0xf0
work_for_cpu_fn+0x2c/0x48
process_one_work+0x488/0xc08
worker_thread+0x330/0x5d0
kthread+0x1c8/0x1d0
ret_from_fork+0x10/0x18

There is also refcount issue, as well:
WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170

The issue is that we make an erroneous extra call to scsi_host_put()
for that host:

So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup
a device release method - ata_devres_release() - which intends to release
the SCSI hosts:

static void ata_devres_release(struct device *gendev, void *res)
{
	...
	for (i = 0; i < host->n_ports; i++) {
		struct ata_port *ap = host->ports[i];

		if (!ap)
			continue;

		if (ap->scsi_host)
			scsi_host_put(ap->scsi_host);

	}
	...
}

However in the ata_scsi_add_hosts() error path, we also call
scsi_host_put() for the SCSI hosts.

Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and
leave this to ata_devres_release().

Fixes: f31871951b38 ("libata: separate out ata_host_alloc() and ata_host_register()")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-scsi.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3a64fa4aaf7e3..0c1572a1cc5ed 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -4570,22 +4570,19 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
 		 */
 		shost->max_host_blocked = 1;
 
-		rc = scsi_add_host_with_dma(ap->scsi_host,
-						&ap->tdev, ap->host->dev);
+		rc = scsi_add_host_with_dma(shost, &ap->tdev, ap->host->dev);
 		if (rc)
-			goto err_add;
+			goto err_alloc;
 	}
 
 	return 0;
 
- err_add:
-	scsi_host_put(host->ports[i]->scsi_host);
  err_alloc:
 	while (--i >= 0) {
 		struct Scsi_Host *shost = host->ports[i]->scsi_host;
 
+		/* scsi_host_put() is in ata_devres_release() */
 		scsi_remove_host(shost);
-		scsi_host_put(shost);
 	}
 	return rc;
 }
-- 
2.20.1

[PATCH 4.19 025/146] pstore/platform: fix potential mem leak if pstore_init_fs failed

[Greg Kroah-Hartman]

From: chenqiwu <chenqiwu@xiaomi.com>

[ Upstream commit 8a57d6d4ddfa41c49014e20493152c41a38fcbf8 ]

There is a potential mem leak when pstore_init_fs failed,
since the pstore compression maybe unlikey to initialized
successfully. We must clean up the allocation once this
unlikey issue happens.

Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Link: https://lore.kernel.org/r/1581068800-13817-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/pstore/platform.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index 4bae3f4fe829d..dcd9c3163587c 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -802,9 +802,9 @@ static int __init pstore_init(void)
 
 	ret = pstore_init_fs();
 	if (ret)
-		return ret;
+		free_buf_for_compression();
 
-	return 0;
+	return ret;
 }
 late_initcall(pstore_init);
 
-- 
2.20.1

[PATCH 4.19 026/146] gfs2: Dont demote a glock until its revokes are written

[Greg Kroah-Hartman]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit df5db5f9ee112e76b5202fbc331f990a0fc316d6 ]

Before this patch, run_queue would demote glocks based on whether
there are any more holders. But if the glock has pending revokes that
haven't been written to the media, giving up the glock might end in
file system corruption if the revokes never get written due to
io errors, node crashes and fences, etc. In that case, another node
will replay the metadata blocks associated with the glock, but
because the revoke was never written, it could replay that block
even though the glock had since been granted to another node who
might have made changes.

This patch changes the logic in run_queue so that it never demotes
a glock until its count of pending revokes reaches zero.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/glock.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index ccdd8c821abd7..f8a5eef3d014b 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -636,6 +636,9 @@ __acquires(&gl->gl_lockref.lock)
 			goto out_unlock;
 		if (nonblock)
 			goto out_sched;
+		smp_mb();
+		if (atomic_read(&gl->gl_revokes) != 0)
+			goto out_sched;
 		set_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags);
 		GLOCK_BUG_ON(gl, gl->gl_demote_state == LM_ST_EXCLUSIVE);
 		gl->gl_target = gl->gl_demote_state;
-- 
2.20.1

[PATCH 4.19 027/146] x86/boot: Use unsigned comparison for addresses

[Greg Kroah-Hartman]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit 81a34892c2c7c809f9c4e22c5ac936ae673fb9a2 ]

The load address is compared with LOAD_PHYSICAL_ADDR using a signed
comparison currently (using jge instruction).

When loading a 64-bit kernel using the new efi32_pe_entry() point added by:

  97aa276579b2 ("efi/x86: Add true mixed mode entry point into .compat section")

using Qemu with -m 3072, the firmware actually loads us above 2Gb,
resulting in a very early crash.

Use the JAE instruction to perform a unsigned comparison instead, as physical
addresses should be considered unsigned.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200301230436.2246909-6-nivedita@alum.mit.edu
Link: https://lore.kernel.org/r/20200308080859.21568-14-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/boot/compressed/head_32.S | 2 +-
 arch/x86/boot/compressed/head_64.S | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 37380c0d59996..01d628ea34024 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -106,7 +106,7 @@ ENTRY(startup_32)
 	notl	%eax
 	andl    %eax, %ebx
 	cmpl	$LOAD_PHYSICAL_ADDR, %ebx
-	jge	1f
+	jae	1f
 #endif
 	movl	$LOAD_PHYSICAL_ADDR, %ebx
 1:
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 4eaa724afce34..9fa644c62839f 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -106,7 +106,7 @@ ENTRY(startup_32)
 	notl	%eax
 	andl	%eax, %ebx
 	cmpl	$LOAD_PHYSICAL_ADDR, %ebx
-	jge	1f
+	jae	1f
 #endif
 	movl	$LOAD_PHYSICAL_ADDR, %ebx
 1:
@@ -297,7 +297,7 @@ ENTRY(startup_64)
 	notq	%rax
 	andq	%rax, %rbp
 	cmpq	$LOAD_PHYSICAL_ADDR, %rbp
-	jge	1f
+	jae	1f
 #endif
 	movq	$LOAD_PHYSICAL_ADDR, %rbp
 1:
-- 
2.20.1

[PATCH 4.19 028/146] efi/x86: Ignore the memory attributes table on i386

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit dd09fad9d2caad2325a39b766ce9e79cfc690184 ]

Commit:

  3a6b6c6fb23667fa ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures")

moved the call to efi_memattr_init() from ARM specific to the generic
EFI init code, in order to be able to apply the restricted permissions
described in that table on x86 as well.

We never enabled this feature fully on i386, and so mapping and
reserving this table is pointless. However, due to the early call to
memblock_reserve(), the memory bookkeeping gets confused to the point
where it produces the splat below when we try to map the memory later
on:

  ------------[ cut here ]------------
  ioremap on RAM at 0x3f251000 - 0x3fa1afff
  WARNING: CPU: 0 PID: 0 at arch/x86/mm/ioremap.c:166 __ioremap_caller ...
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.20.0 #48
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
  EIP: __ioremap_caller.constprop.0+0x249/0x260
  Code: 90 0f b7 05 4e 38 40 de 09 45 e0 e9 09 ff ff ff 90 8d 45 ec c6 05 ...
  EAX: 00000029 EBX: 00000000 ECX: de59c228 EDX: 00000001
  ESI: 3f250fff EDI: 00000000 EBP: de3edf20 ESP: de3edee0
  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00200296
  CR0: 80050033 CR2: ffd17000 CR3: 1e58c000 CR4: 00040690
  Call Trace:
   ioremap_cache+0xd/0x10
   ? old_map_region+0x72/0x9d
   old_map_region+0x72/0x9d
   efi_map_region+0x8/0xa
   efi_enter_virtual_mode+0x260/0x43b
   start_kernel+0x329/0x3aa
   i386_start_kernel+0xa7/0xab
   startup_32_smp+0x164/0x168
  ---[ end trace e15ccf6b9f356833 ]---

Let's work around this by disregarding the memory attributes table
altogether on i386, which does not result in a loss of functionality
or protection, given that we never consumed the contents.

Fixes: 3a6b6c6fb23667fa ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE ... ")
Tested-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200304165917.5893-1-ardb@kernel.org
Link: https://lore.kernel.org/r/20200308080859.21568-21-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/efi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index d54fca902e64f..f1e0a27152691 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -572,7 +572,7 @@ int __init efi_config_parse_tables(void *config_tables, int count, int sz,
 		}
 	}
 
-	if (efi_enabled(EFI_MEMMAP))
+	if (!IS_ENABLED(CONFIG_X86_32) && efi_enabled(EFI_MEMMAP))
 		efi_memattr_init();
 
 	efi_tpm_eventlog_init();
-- 
2.20.1

[PATCH 4.19 029/146] genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy()

[Greg Kroah-Hartman]

From: Alexander Sverdlin <alexander.sverdlin@nokia.com>

[ Upstream commit 87f2d1c662fa1761359fdf558246f97e484d177a ]

irq_domain_alloc_irqs_hierarchy() has 3 call sites in the compilation unit
but only one of them checks for the pointer which is being dereferenced
inside the called function. Move the check into the function. This allows
for catching the error instead of the following crash:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at 0x0
LR is at gpiochip_hierarchy_irq_domain_alloc+0x11f/0x140
...
[<c06c23ff>] (gpiochip_hierarchy_irq_domain_alloc)
[<c0462a89>] (__irq_domain_alloc_irqs)
[<c0462dad>] (irq_create_fwspec_mapping)
[<c06c2251>] (gpiochip_to_irq)
[<c06c1c9b>] (gpiod_to_irq)
[<bf973073>] (gpio_irqs_init [gpio_irqs])
[<bf974048>] (gpio_irqs_exit+0xecc/0xe84 [gpio_irqs])
Code: bad PC value

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200306174720.82604-1-alexander.sverdlin@nokia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/irq/irqdomain.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index e0eda2bd39753..0a76c44eb6b29 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -1255,6 +1255,11 @@ int irq_domain_alloc_irqs_hierarchy(struct irq_domain *domain,
 				    unsigned int irq_base,
 				    unsigned int nr_irqs, void *arg)
 {
+	if (!domain->ops->alloc) {
+		pr_debug("domain->ops->alloc() is NULL\n");
+		return -ENOSYS;
+	}
+
 	return domain->ops->alloc(domain, irq_base, nr_irqs, arg);
 }
 
@@ -1292,11 +1297,6 @@ int __irq_domain_alloc_irqs(struct irq_domain *domain, int irq_base,
 			return -EINVAL;
 	}
 
-	if (!domain->ops->alloc) {
-		pr_debug("domain->ops->alloc() is NULL\n");
-		return -ENOSYS;
-	}
-
 	if (realloc && irq_base >= 0) {
 		virq = irq_base;
 	} else {
-- 
2.20.1

[PATCH 4.19 030/146] block: Fix use-after-free issue accessing struct io_cq

[Greg Kroah-Hartman]

From: Sahitya Tummala <stummala@codeaurora.org>

[ Upstream commit 30a2da7b7e225ef6c87a660419ea04d3cef3f6a7 ]

There is a potential race between ioc_release_fn() and
ioc_clear_queue() as shown below, due to which below kernel
crash is observed. It also can result into use-after-free
issue.

context#1:				context#2:
ioc_release_fn()			__ioc_clear_queue() gets the same icq
->spin_lock(&ioc->lock);		->spin_lock(&ioc->lock);
->ioc_destroy_icq(icq);
  ->list_del_init(&icq->q_node);
  ->call_rcu(&icq->__rcu_head,
  	icq_free_icq_rcu);
->spin_unlock(&ioc->lock);
					->ioc_destroy_icq(icq);
					  ->hlist_del_init(&icq->ioc_node);
					  This results into below crash as this memory
					  is now used by icq->__rcu_head in context#1.
					  There is a chance that icq could be free'd
					  as well.

22150.386550:   <6> Unable to handle kernel write to read-only memory
at virtual address ffffffaa8d31ca50
...
Call trace:
22150.607350:   <2>  ioc_destroy_icq+0x44/0x110
22150.611202:   <2>  ioc_clear_queue+0xac/0x148
22150.615056:   <2>  blk_cleanup_queue+0x11c/0x1a0
22150.619174:   <2>  __scsi_remove_device+0xdc/0x128
22150.623465:   <2>  scsi_forget_host+0x2c/0x78
22150.627315:   <2>  scsi_remove_host+0x7c/0x2a0
22150.631257:   <2>  usb_stor_disconnect+0x74/0xc8
22150.635371:   <2>  usb_unbind_interface+0xc8/0x278
22150.639665:   <2>  device_release_driver_internal+0x198/0x250
22150.644897:   <2>  device_release_driver+0x24/0x30
22150.649176:   <2>  bus_remove_device+0xec/0x140
22150.653204:   <2>  device_del+0x270/0x460
22150.656712:   <2>  usb_disable_device+0x120/0x390
22150.660918:   <2>  usb_disconnect+0xf4/0x2e0
22150.664684:   <2>  hub_event+0xd70/0x17e8
22150.668197:   <2>  process_one_work+0x210/0x480
22150.672222:   <2>  worker_thread+0x32c/0x4c8

Fix this by adding a new ICQ_DESTROYED flag in ioc_destroy_icq() to
indicate this icq is once marked as destroyed. Also, ensure
__ioc_clear_queue() is accessing icq within rcu_read_lock/unlock so
that icq doesn't get free'd up while it is still using it.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Co-developed-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-ioc.c           | 7 +++++++
 include/linux/iocontext.h | 1 +
 2 files changed, 8 insertions(+)

diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index 01580f88fcb39..4c810969c3e2f 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -87,6 +87,7 @@ static void ioc_destroy_icq(struct io_cq *icq)
 	 * making it impossible to determine icq_cache.  Record it in @icq.
 	 */
 	icq->__rcu_icq_cache = et->icq_cache;
+	icq->flags |= ICQ_DESTROYED;
 	call_rcu(&icq->__rcu_head, icq_free_icq_rcu);
 }
 
@@ -230,15 +231,21 @@ static void __ioc_clear_queue(struct list_head *icq_list)
 {
 	unsigned long flags;
 
+	rcu_read_lock();
 	while (!list_empty(icq_list)) {
 		struct io_cq *icq = list_entry(icq_list->next,
 					       struct io_cq, q_node);
 		struct io_context *ioc = icq->ioc;
 
 		spin_lock_irqsave(&ioc->lock, flags);
+		if (icq->flags & ICQ_DESTROYED) {
+			spin_unlock_irqrestore(&ioc->lock, flags);
+			continue;
+		}
 		ioc_destroy_icq(icq);
 		spin_unlock_irqrestore(&ioc->lock, flags);
 	}
+	rcu_read_unlock();
 }
 
 /**
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index dba15ca8e60bc..1dcd9198beb7f 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -8,6 +8,7 @@
 
 enum {
 	ICQ_EXITED		= 1 << 2,
+	ICQ_DESTROYED		= 1 << 3,
 };
 
 /*
-- 
2.20.1

[PATCH 4.19 031/146] media: i2c: ov5695: Fix power on and off sequences

[Greg Kroah-Hartman]

From: Dongchun Zhu <dongchun.zhu@mediatek.com>

[ Upstream commit f1a64f56663e9d03e509439016dcbddd0166b2da ]

>From the measured hardware signal, OV5695 reset pin goes high for a
short period of time during boot-up. From the sensor specification, the
reset pin is active low and the DT binding defines the pin as active
low, which means that the values set by the driver are inverted and thus
the value requested in probe ends up high.

Fix it by changing probe to request the reset GPIO initialized to high,
which makes the initial state of the physical signal low.

In addition, DOVDD rising must occur before DVDD rising from spec., but
regulator_bulk_enable() API enables all the regulators asynchronously.
Use an explicit loops of regulator_enable() instead.

For power off sequence, it is required that DVDD falls first. Given the
bulk API does not give any guarantee about the order of regulators,
change the driver to use regulator_disable() instead.

The sensor also requires a delay between reset high and first I2C
transaction, which was assumed to be 8192 XVCLK cycles, but 1ms is
recommended by the vendor. Fix this as well.

Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov5695.c | 49 ++++++++++++++++++++++++--------------
 1 file changed, 31 insertions(+), 18 deletions(-)

diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c
index 5d107c53364d6..be242bb8fefcd 100644
--- a/drivers/media/i2c/ov5695.c
+++ b/drivers/media/i2c/ov5695.c
@@ -974,16 +974,9 @@ unlock_and_return:
 	return ret;
 }
 
-/* Calculate the delay in us by clock rate and clock cycles */
-static inline u32 ov5695_cal_delay(u32 cycles)
-{
-	return DIV_ROUND_UP(cycles, OV5695_XVCLK_FREQ / 1000 / 1000);
-}
-
 static int __ov5695_power_on(struct ov5695 *ov5695)
 {
-	int ret;
-	u32 delay_us;
+	int i, ret;
 	struct device *dev = &ov5695->client->dev;
 
 	ret = clk_prepare_enable(ov5695->xvclk);
@@ -994,21 +987,28 @@ static int __ov5695_power_on(struct ov5695 *ov5695)
 
 	gpiod_set_value_cansleep(ov5695->reset_gpio, 1);
 
-	ret = regulator_bulk_enable(OV5695_NUM_SUPPLIES, ov5695->supplies);
-	if (ret < 0) {
-		dev_err(dev, "Failed to enable regulators\n");
-		goto disable_clk;
+	/*
+	 * The hardware requires the regulators to be powered on in order,
+	 * so enable them one by one.
+	 */
+	for (i = 0; i < OV5695_NUM_SUPPLIES; i++) {
+		ret = regulator_enable(ov5695->supplies[i].consumer);
+		if (ret) {
+			dev_err(dev, "Failed to enable %s: %d\n",
+				ov5695->supplies[i].supply, ret);
+			goto disable_reg_clk;
+		}
 	}
 
 	gpiod_set_value_cansleep(ov5695->reset_gpio, 0);
 
-	/* 8192 cycles prior to first SCCB transaction */
-	delay_us = ov5695_cal_delay(8192);
-	usleep_range(delay_us, delay_us * 2);
+	usleep_range(1000, 1200);
 
 	return 0;
 
-disable_clk:
+disable_reg_clk:
+	for (--i; i >= 0; i--)
+		regulator_disable(ov5695->supplies[i].consumer);
 	clk_disable_unprepare(ov5695->xvclk);
 
 	return ret;
@@ -1016,9 +1016,22 @@ disable_clk:
 
 static void __ov5695_power_off(struct ov5695 *ov5695)
 {
+	struct device *dev = &ov5695->client->dev;
+	int i, ret;
+
 	clk_disable_unprepare(ov5695->xvclk);
 	gpiod_set_value_cansleep(ov5695->reset_gpio, 1);
-	regulator_bulk_disable(OV5695_NUM_SUPPLIES, ov5695->supplies);
+
+	/*
+	 * The hardware requires the regulators to be powered off in order,
+	 * so disable them one by one.
+	 */
+	for (i = OV5695_NUM_SUPPLIES - 1; i >= 0; i--) {
+		ret = regulator_disable(ov5695->supplies[i].consumer);
+		if (ret)
+			dev_err(dev, "Failed to disable %s: %d\n",
+				ov5695->supplies[i].supply, ret);
+	}
 }
 
 static int __maybe_unused ov5695_runtime_resume(struct device *dev)
@@ -1288,7 +1301,7 @@ static int ov5695_probe(struct i2c_client *client,
 	if (clk_get_rate(ov5695->xvclk) != OV5695_XVCLK_FREQ)
 		dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
 
-	ov5695->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	ov5695->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(ov5695->reset_gpio)) {
 		dev_err(dev, "Failed to get reset-gpios\n");
 		return -EINVAL;
-- 
2.20.1

[PATCH 4.19 032/146] usb: dwc3: core: add support for disabling SS instances in park mode

[Greg Kroah-Hartman]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 7ba6b09fda5e0cb741ee56f3264665e0edc64822 ]

In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
 xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
 xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
 xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
 xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
 hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
 xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
 usb 2-1.1-port1: cannot reset (err = -22)

Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"

Synopsys explains:
The GUCTL1.PARKMODE_DISABLE_SS is only available in
dwc_usb3 controller running in host mode.
This should not be set for other IPs.
This can be disabled by default based on IP, but I recommend to have a
property to enable this feature for devices that need this.

CC: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.c | 5 +++++
 drivers/usb/dwc3/core.h | 4 ++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 6666d2a52bf56..60d08269ad9a0 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -981,6 +981,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		if (dwc->dis_tx_ipgap_linecheck_quirk)
 			reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
 
+		if (dwc->parkmode_disable_ss_quirk)
+			reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
+
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
@@ -1287,6 +1290,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				"snps,dis-del-phy-power-chg-quirk");
 	dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
 				"snps,dis-tx-ipgap-linecheck-quirk");
+	dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
+				"snps,parkmode-disable-ss-quirk");
 
 	dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
 				"snps,tx_de_emphasis_quirk");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 131028501752b..e34308d64619e 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -242,6 +242,7 @@
 #define DWC3_GUCTL_HSTINAUTORETRY	BIT(14)
 
 /* Global User Control 1 Register */
+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS	BIT(17)
 #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)
 #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW	BIT(24)
 
@@ -992,6 +993,8 @@ struct dwc3_scratchpad_array {
  *			change quirk.
  * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
  *			check during HS transmit.
+ * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
+ *			instances in park mode.
  * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
  * @tx_de_emphasis: Tx de-emphasis value
  * 	0	- -6dB de-emphasis
@@ -1163,6 +1166,7 @@ struct dwc3 {
 	unsigned		dis_u2_freeclk_exists_quirk:1;
 	unsigned		dis_del_phy_power_chg_quirk:1;
 	unsigned		dis_tx_ipgap_linecheck_quirk:1;
+	unsigned		parkmode_disable_ss_quirk:1;
 
 	unsigned		tx_de_emphasis_quirk:1;
 	unsigned		tx_de_emphasis:2;
-- 
2.20.1

[PATCH 4.19 033/146] irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependency

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 7809f7011c3bce650e502a98afeb05961470d865 ]

On a very heavily loaded D05 with GICv4, I managed to trigger the
following lockdep splat:

[ 6022.598864] ======================================================
[ 6022.605031] WARNING: possible circular locking dependency detected
[ 6022.611200] 5.6.0-rc4-00026-geee7c7b0f498 #680 Tainted: G            E
[ 6022.618061] ------------------------------------------------------
[ 6022.624227] qemu-system-aar/7569 is trying to acquire lock:
[ 6022.629789] ffff042f97606808 (&p->pi_lock){-.-.}, at: try_to_wake_up+0x54/0x7a0
[ 6022.637102]
[ 6022.637102] but task is already holding lock:
[ 6022.642921] ffff002fae424cf0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x5c/0x98
[ 6022.651350]
[ 6022.651350] which lock already depends on the new lock.
[ 6022.651350]
[ 6022.659512]
[ 6022.659512] the existing dependency chain (in reverse order) is:
[ 6022.666980]
[ 6022.666980] -> #2 (&irq_desc_lock_class){-.-.}:
[ 6022.672983]        _raw_spin_lock_irqsave+0x50/0x78
[ 6022.677848]        __irq_get_desc_lock+0x5c/0x98
[ 6022.682453]        irq_set_vcpu_affinity+0x40/0xc0
[ 6022.687236]        its_make_vpe_non_resident+0x6c/0xb8
[ 6022.692364]        vgic_v4_put+0x54/0x70
[ 6022.696273]        vgic_v3_put+0x20/0xd8
[ 6022.700183]        kvm_vgic_put+0x30/0x48
[ 6022.704182]        kvm_arch_vcpu_put+0x34/0x50
[ 6022.708614]        kvm_sched_out+0x34/0x50
[ 6022.712700]        __schedule+0x4bc/0x7f8
[ 6022.716697]        schedule+0x50/0xd8
[ 6022.720347]        kvm_arch_vcpu_ioctl_run+0x5f0/0x978
[ 6022.725473]        kvm_vcpu_ioctl+0x3d4/0x8f8
[ 6022.729820]        ksys_ioctl+0x90/0xd0
[ 6022.733642]        __arm64_sys_ioctl+0x24/0x30
[ 6022.738074]        el0_svc_common.constprop.3+0xa8/0x1e8
[ 6022.743373]        do_el0_svc+0x28/0x88
[ 6022.747198]        el0_svc+0x14/0x40
[ 6022.750761]        el0_sync_handler+0x124/0x2b8
[ 6022.755278]        el0_sync+0x140/0x180
[ 6022.759100]
[ 6022.759100] -> #1 (&rq->lock){-.-.}:
[ 6022.764143]        _raw_spin_lock+0x38/0x50
[ 6022.768314]        task_fork_fair+0x40/0x128
[ 6022.772572]        sched_fork+0xe0/0x210
[ 6022.776484]        copy_process+0x8c4/0x18d8
[ 6022.780742]        _do_fork+0x88/0x6d8
[ 6022.784478]        kernel_thread+0x64/0x88
[ 6022.788563]        rest_init+0x30/0x270
[ 6022.792390]        arch_call_rest_init+0x14/0x1c
[ 6022.796995]        start_kernel+0x498/0x4c4
[ 6022.801164]
[ 6022.801164] -> #0 (&p->pi_lock){-.-.}:
[ 6022.806382]        __lock_acquire+0xdd8/0x15c8
[ 6022.810813]        lock_acquire+0xd0/0x218
[ 6022.814896]        _raw_spin_lock_irqsave+0x50/0x78
[ 6022.819761]        try_to_wake_up+0x54/0x7a0
[ 6022.824018]        wake_up_process+0x1c/0x28
[ 6022.828276]        wakeup_softirqd+0x38/0x40
[ 6022.832533]        __tasklet_schedule_common+0xc4/0xf0
[ 6022.837658]        __tasklet_schedule+0x24/0x30
[ 6022.842176]        check_irq_resend+0xc8/0x158
[ 6022.846609]        irq_startup+0x74/0x128
[ 6022.850606]        __enable_irq+0x6c/0x78
[ 6022.854602]        enable_irq+0x54/0xa0
[ 6022.858431]        its_make_vpe_non_resident+0xa4/0xb8
[ 6022.863557]        vgic_v4_put+0x54/0x70
[ 6022.867469]        kvm_arch_vcpu_blocking+0x28/0x38
[ 6022.872336]        kvm_vcpu_block+0x48/0x490
[ 6022.876594]        kvm_handle_wfx+0x18c/0x310
[ 6022.880938]        handle_exit+0x138/0x198
[ 6022.885022]        kvm_arch_vcpu_ioctl_run+0x4d4/0x978
[ 6022.890148]        kvm_vcpu_ioctl+0x3d4/0x8f8
[ 6022.894494]        ksys_ioctl+0x90/0xd0
[ 6022.898317]        __arm64_sys_ioctl+0x24/0x30
[ 6022.902748]        el0_svc_common.constprop.3+0xa8/0x1e8
[ 6022.908046]        do_el0_svc+0x28/0x88
[ 6022.911871]        el0_svc+0x14/0x40
[ 6022.915434]        el0_sync_handler+0x124/0x2b8
[ 6022.919951]        el0_sync+0x140/0x180
[ 6022.923773]
[ 6022.923773] other info that might help us debug this:
[ 6022.923773]
[ 6022.931762] Chain exists of:
[ 6022.931762]   &p->pi_lock --> &rq->lock --> &irq_desc_lock_class
[ 6022.931762]
[ 6022.942101]  Possible unsafe locking scenario:
[ 6022.942101]
[ 6022.948007]        CPU0                    CPU1
[ 6022.952523]        ----                    ----
[ 6022.957039]   lock(&irq_desc_lock_class);
[ 6022.961036]                                lock(&rq->lock);
[ 6022.966595]                                lock(&irq_desc_lock_class);
[ 6022.973109]   lock(&p->pi_lock);
[ 6022.976324]
[ 6022.976324]  *** DEADLOCK ***

This is happening because we have a pending doorbell that requires
retrigger. As SW retriggering is done in a tasklet, we trigger the
circular dependency above.

The easy cop-out is to provide a retrigger callback that doesn't
require acquiring any extra lock.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200310184921.23552-5-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index f9b73336a39ee..fe7d63cdfb1d7 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -2858,12 +2858,18 @@ static int its_vpe_set_irqchip_state(struct irq_data *d,
 	return 0;
 }
 
+static int its_vpe_retrigger(struct irq_data *d)
+{
+	return !its_vpe_set_irqchip_state(d, IRQCHIP_STATE_PENDING, true);
+}
+
 static struct irq_chip its_vpe_irq_chip = {
 	.name			= "GICv4-vpe",
 	.irq_mask		= its_vpe_mask_irq,
 	.irq_unmask		= its_vpe_unmask_irq,
 	.irq_eoi		= irq_chip_eoi_parent,
 	.irq_set_affinity	= its_vpe_set_affinity,
+	.irq_retrigger		= its_vpe_retrigger,
 	.irq_set_irqchip_state	= its_vpe_set_irqchip_state,
 	.irq_set_vcpu_affinity	= its_vpe_set_vcpu_affinity,
 };
-- 
2.20.1

[PATCH 4.19 034/146] md: check arrays is suspended in mddev_detach before call quiesce operations

[Greg Kroah-Hartman]

From: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>

[ Upstream commit 6b40bec3b13278d21fa6c1ae7a0bdf2e550eed5f ]

Don't call quiesce(1) and quiesce(0) if array is already suspended,
otherwise in level_store, the array is writable after mddev_detach
in below part though the intention is to make array writable after
resume.

	mddev_suspend(mddev);
	mddev_detach(mddev);
	...
	mddev_resume(mddev);

And it also causes calltrace as follows in [1].

[48005.653834] WARNING: CPU: 1 PID: 45380 at kernel/kthread.c:510 kthread_park+0x77/0x90
[...]
[48005.653976] CPU: 1 PID: 45380 Comm: mdadm Tainted: G           OE     5.4.10-arch1-1 #1
[48005.653979] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4105-ITX, BIOS P1.40 08/06/2018
[48005.653984] RIP: 0010:kthread_park+0x77/0x90
[48005.654015] Call Trace:
[48005.654039]  r5l_quiesce+0x3c/0x70 [raid456]
[48005.654052]  raid5_quiesce+0x228/0x2e0 [raid456]
[48005.654073]  mddev_detach+0x30/0x70 [md_mod]
[48005.654090]  level_store+0x202/0x670 [md_mod]
[48005.654099]  ? security_capable+0x40/0x60
[48005.654114]  md_attr_store+0x7b/0xc0 [md_mod]
[48005.654123]  kernfs_fop_write+0xce/0x1b0
[48005.654132]  vfs_write+0xb6/0x1a0
[48005.654138]  ksys_write+0x67/0xe0
[48005.654146]  do_syscall_64+0x4e/0x140
[48005.654155]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[48005.654161] RIP: 0033:0x7fa0c8737497

[1]: https://bugzilla.kernel.org/show_bug.cgi?id=206161

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 62f214d43e15a..9426976e0860d 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5874,7 +5874,7 @@ EXPORT_SYMBOL_GPL(md_stop_writes);
 static void mddev_detach(struct mddev *mddev)
 {
 	md_bitmap_wait_behind_writes(mddev);
-	if (mddev->pers && mddev->pers->quiesce) {
+	if (mddev->pers && mddev->pers->quiesce && !mddev->suspended) {
 		mddev->pers->quiesce(mddev, 1);
 		mddev->pers->quiesce(mddev, 0);
 	}
-- 
2.20.1

[PATCH 4.19 035/146] firmware: fix a double abort case with fw_load_sysfs_fallback

[Greg Kroah-Hartman]

From: Junyong Sun <sunjy516@gmail.com>

[ Upstream commit bcfbd3523f3c6eea51a74d217a8ebc5463bcb7f4 ]

fw_sysfs_wait_timeout may return err with -ENOENT
at fw_load_sysfs_fallback and firmware is already
in abort status, no need to abort again, so skip it.

This issue is caused by concurrent situation like below:
when thread 1# wait firmware loading, thread 2# may write
-1 to abort loading and wakeup thread 1# before it timeout.
so wait_for_completion_killable_timeout of thread 1# would
return remaining time which is != 0 with fw_st->status
FW_STATUS_ABORTED.And the results would be converted into
err -ENOENT in __fw_state_wait_common and transfered to
fw_load_sysfs_fallback in thread 1#.
The -ENOENT means firmware status is already at ABORTED,
so fw_load_sysfs_fallback no need to get mutex to abort again.
-----------------------------
thread 1#,wait for loading
fw_load_sysfs_fallback
 ->fw_sysfs_wait_timeout
    ->__fw_state_wait_common
       ->wait_for_completion_killable_timeout

in __fw_state_wait_common,
...
93    ret = wait_for_completion_killable_timeout(&fw_st->completion, timeout);
94    if (ret != 0 && fw_st->status == FW_STATUS_ABORTED)
95       return -ENOENT;
96    if (!ret)
97	 return -ETIMEDOUT;
98
99    return ret < 0 ? ret : 0;
-----------------------------
thread 2#, write -1 to abort loading
firmware_loading_store
 ->fw_load_abort
   ->__fw_load_abort
     ->fw_state_aborted
       ->__fw_state_set
         ->complete_all

in __fw_state_set,
...
111    if (status == FW_STATUS_DONE || status == FW_STATUS_ABORTED)
112       complete_all(&fw_st->completion);
-------------------------------------------
BTW,the double abort issue would not cause kernel panic or create an issue,
but slow down it sometimes.The change is just a minor optimization.

Signed-off-by: Junyong Sun <sunjunyong@xiaomi.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/1583202968-28792-1-git-send-email-sunjunyong@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/firmware_loader/fallback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/firmware_loader/fallback.c b/drivers/base/firmware_loader/fallback.c
index 818d8c37d70a9..3b7b748c4d4f2 100644
--- a/drivers/base/firmware_loader/fallback.c
+++ b/drivers/base/firmware_loader/fallback.c
@@ -572,7 +572,7 @@ static int fw_load_sysfs_fallback(struct fw_sysfs *fw_sysfs,
 	}
 
 	retval = fw_sysfs_wait_timeout(fw_priv, timeout);
-	if (retval < 0) {
+	if (retval < 0 && retval != -ENOENT) {
 		mutex_lock(&fw_lock);
 		fw_load_abort(fw_sysfs);
 		mutex_unlock(&fw_lock);
-- 
2.20.1

[PATCH 4.19 036/146] locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps()

[Greg Kroah-Hartman]

From: Boqun Feng <boqun.feng@gmail.com>

[ Upstream commit 25016bd7f4caf5fc983bbab7403d08e64cba3004 ]

Qian Cai reported a bug when PROVE_RCU_LIST=y, and read on /proc/lockdep
triggered a warning:

  [ ] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
  ...
  [ ] Call Trace:
  [ ]  lock_is_held_type+0x5d/0x150
  [ ]  ? rcu_lockdep_current_cpu_online+0x64/0x80
  [ ]  rcu_read_lock_any_held+0xac/0x100
  [ ]  ? rcu_read_lock_held+0xc0/0xc0
  [ ]  ? __slab_free+0x421/0x540
  [ ]  ? kasan_kmalloc+0x9/0x10
  [ ]  ? __kmalloc_node+0x1d7/0x320
  [ ]  ? kvmalloc_node+0x6f/0x80
  [ ]  __bfs+0x28a/0x3c0
  [ ]  ? class_equal+0x30/0x30
  [ ]  lockdep_count_forward_deps+0x11a/0x1a0

The warning got triggered because lockdep_count_forward_deps() call
__bfs() without current->lockdep_recursion being set, as a result
a lockdep internal function (__bfs()) is checked by lockdep, which is
unexpected, and the inconsistency between the irq-off state and the
state traced by lockdep caused the warning.

Apart from this warning, lockdep internal functions like __bfs() should
always be protected by current->lockdep_recursion to avoid potential
deadlocks and data inconsistency, therefore add the
current->lockdep_recursion on-and-off section to protect __bfs() in both
lockdep_count_forward_deps() and lockdep_count_backward_deps()

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200312151258.128036-1-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/lockdep.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 1e272f6a01e73..8a1758b094b70 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -1260,9 +1260,11 @@ unsigned long lockdep_count_forward_deps(struct lock_class *class)
 	this.class = class;
 
 	raw_local_irq_save(flags);
+	current->lockdep_recursion = 1;
 	arch_spin_lock(&lockdep_lock);
 	ret = __lockdep_count_forward_deps(&this);
 	arch_spin_unlock(&lockdep_lock);
+	current->lockdep_recursion = 0;
 	raw_local_irq_restore(flags);
 
 	return ret;
@@ -1287,9 +1289,11 @@ unsigned long lockdep_count_backward_deps(struct lock_class *class)
 	this.class = class;
 
 	raw_local_irq_save(flags);
+	current->lockdep_recursion = 1;
 	arch_spin_lock(&lockdep_lock);
 	ret = __lockdep_count_backward_deps(&this);
 	arch_spin_unlock(&lockdep_lock);
+	current->lockdep_recursion = 0;
 	raw_local_irq_restore(flags);
 
 	return ret;
-- 
2.20.1

[PATCH 4.19 037/146] block, bfq: fix use-after-free in bfq_idle_slice_timer_body

[Greg Kroah-Hartman]

From: Zhiqiang Liu <liuzhiqiang26@huawei.com>

[ Upstream commit 2f95fa5c955d0a9987ffdc3a095e2f4e62c5f2a9 ]

In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is
not in bfqd-lock critical section. The bfqq, which is not
equal to NULL in bfq_idle_slice_timer, may be freed after passing
to bfq_idle_slice_timer_body. So we will access the freed memory.

In addition, considering the bfqq may be in race, we should
firstly check whether bfqq is in service before doing something
on it in bfq_idle_slice_timer_body func. If the bfqq in race is
not in service, it means the bfqq has been expired through
__bfq_bfqq_expire func, and wait_request flags has been cleared in
__bfq_bfqd_reset_in_service func. So we do not need to re-clear the
wait_request of bfqq which is not in service.

KASAN log is given as follows:
[13058.354613] ==================================================================
[13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290
[13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767
[13058.354646]
[13058.354655] CPU: 96 PID: 19767 Comm: fork13
[13058.354661] Call trace:
[13058.354667]  dump_backtrace+0x0/0x310
[13058.354672]  show_stack+0x28/0x38
[13058.354681]  dump_stack+0xd8/0x108
[13058.354687]  print_address_description+0x68/0x2d0
[13058.354690]  kasan_report+0x124/0x2e0
[13058.354697]  __asan_load8+0x88/0xb0
[13058.354702]  bfq_idle_slice_timer+0xac/0x290
[13058.354707]  __hrtimer_run_queues+0x298/0x8b8
[13058.354710]  hrtimer_interrupt+0x1b8/0x678
[13058.354716]  arch_timer_handler_phys+0x4c/0x78
[13058.354722]  handle_percpu_devid_irq+0xf0/0x558
[13058.354731]  generic_handle_irq+0x50/0x70
[13058.354735]  __handle_domain_irq+0x94/0x110
[13058.354739]  gic_handle_irq+0x8c/0x1b0
[13058.354742]  el1_irq+0xb8/0x140
[13058.354748]  do_wp_page+0x260/0xe28
[13058.354752]  __handle_mm_fault+0x8ec/0x9b0
[13058.354756]  handle_mm_fault+0x280/0x460
[13058.354762]  do_page_fault+0x3ec/0x890
[13058.354765]  do_mem_abort+0xc0/0x1b0
[13058.354768]  el0_da+0x24/0x28
[13058.354770]
[13058.354773] Allocated by task 19731:
[13058.354780]  kasan_kmalloc+0xe0/0x190
[13058.354784]  kasan_slab_alloc+0x14/0x20
[13058.354788]  kmem_cache_alloc_node+0x130/0x440
[13058.354793]  bfq_get_queue+0x138/0x858
[13058.354797]  bfq_get_bfqq_handle_split+0xd4/0x328
[13058.354801]  bfq_init_rq+0x1f4/0x1180
[13058.354806]  bfq_insert_requests+0x264/0x1c98
[13058.354811]  blk_mq_sched_insert_requests+0x1c4/0x488
[13058.354818]  blk_mq_flush_plug_list+0x2d4/0x6e0
[13058.354826]  blk_flush_plug_list+0x230/0x548
[13058.354830]  blk_finish_plug+0x60/0x80
[13058.354838]  read_pages+0xec/0x2c0
[13058.354842]  __do_page_cache_readahead+0x374/0x438
[13058.354846]  ondemand_readahead+0x24c/0x6b0
[13058.354851]  page_cache_sync_readahead+0x17c/0x2f8
[13058.354858]  generic_file_buffered_read+0x588/0xc58
[13058.354862]  generic_file_read_iter+0x1b4/0x278
[13058.354965]  ext4_file_read_iter+0xa8/0x1d8 [ext4]
[13058.354972]  __vfs_read+0x238/0x320
[13058.354976]  vfs_read+0xbc/0x1c0
[13058.354980]  ksys_read+0xdc/0x1b8
[13058.354984]  __arm64_sys_read+0x50/0x60
[13058.354990]  el0_svc_common+0xb4/0x1d8
[13058.354994]  el0_svc_handler+0x50/0xa8
[13058.354998]  el0_svc+0x8/0xc
[13058.354999]
[13058.355001] Freed by task 19731:
[13058.355007]  __kasan_slab_free+0x120/0x228
[13058.355010]  kasan_slab_free+0x10/0x18
[13058.355014]  kmem_cache_free+0x288/0x3f0
[13058.355018]  bfq_put_queue+0x134/0x208
[13058.355022]  bfq_exit_icq_bfqq+0x164/0x348
[13058.355026]  bfq_exit_icq+0x28/0x40
[13058.355030]  ioc_exit_icq+0xa0/0x150
[13058.355035]  put_io_context_active+0x250/0x438
[13058.355038]  exit_io_context+0xd0/0x138
[13058.355045]  do_exit+0x734/0xc58
[13058.355050]  do_group_exit+0x78/0x220
[13058.355054]  __wake_up_parent+0x0/0x50
[13058.355058]  el0_svc_common+0xb4/0x1d8
[13058.355062]  el0_svc_handler+0x50/0xa8
[13058.355066]  el0_svc+0x8/0xc
[13058.355067]
[13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464
[13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040)
[13058.355077] The buggy address belongs to the page:
[13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0
[13058.366175] flags: 0x2ffffe0000008100(slab|head)
[13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780
[13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000
[13058.370789] page dumped because: kasan: bad access detected
[13058.370791]
[13058.370792] Memory state around the buggy address:
[13058.370797]  ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb
[13058.370801]  ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370808]                                                                 ^
[13058.370811]  ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370815]  ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[13058.370817] ==================================================================
[13058.370820] Disabling lock debugging due to kernel taint

Here, we directly pass the bfqd to bfq_idle_slice_timer_body func.
--
V2->V3: rewrite the comment as suggested by Paolo Valente
V1->V2: add one comment, and add Fixes and Reported-by tag.

Fixes: aee69d78d ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reported-by: Wang Wang <wangwang2@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Feilong Lin <linfeilong@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bfq-iosched.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 66b1ebc21ce4f..5198ed1b36690 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -5156,20 +5156,28 @@ static struct bfq_queue *bfq_init_rq(struct request *rq)
 	return bfqq;
 }
 
-static void bfq_idle_slice_timer_body(struct bfq_queue *bfqq)
+static void
+bfq_idle_slice_timer_body(struct bfq_data *bfqd, struct bfq_queue *bfqq)
 {
-	struct bfq_data *bfqd = bfqq->bfqd;
 	enum bfqq_expiration reason;
 	unsigned long flags;
 
 	spin_lock_irqsave(&bfqd->lock, flags);
-	bfq_clear_bfqq_wait_request(bfqq);
 
+	/*
+	 * Considering that bfqq may be in race, we should firstly check
+	 * whether bfqq is in service before doing something on it. If
+	 * the bfqq in race is not in service, it has already been expired
+	 * through __bfq_bfqq_expire func and its wait_request flags has
+	 * been cleared in __bfq_bfqd_reset_in_service func.
+	 */
 	if (bfqq != bfqd->in_service_queue) {
 		spin_unlock_irqrestore(&bfqd->lock, flags);
 		return;
 	}
 
+	bfq_clear_bfqq_wait_request(bfqq);
+
 	if (bfq_bfqq_budget_timeout(bfqq))
 		/*
 		 * Also here the queue can be safely expired
@@ -5214,7 +5222,7 @@ static enum hrtimer_restart bfq_idle_slice_timer(struct hrtimer *timer)
 	 * early.
 	 */
 	if (bfqq)
-		bfq_idle_slice_timer_body(bfqq);
+		bfq_idle_slice_timer_body(bfqd, bfqq);
 
 	return HRTIMER_NORESTART;
 }
-- 
2.20.1

[PATCH 4.19 038/146] btrfs: qgroup: ensure qgroup_rescan_running is only set when the worker is at least queued

[Greg Kroah-Hartman]

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit d61acbbf54c612ea9bf67eed609494cda0857b3a ]

[BUG]
There are some reports about btrfs wait forever to unmount itself, with
the following call trace:

  INFO: task umount:4631 blocked for more than 491 seconds.
        Tainted: G               X  5.3.8-2-default #1
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  umount          D    0  4631   3337 0x00000000
  Call Trace:
  ([<00000000174adf7a>] __schedule+0x342/0x748)
   [<00000000174ae3ca>] schedule+0x4a/0xd8
   [<00000000174b1f08>] schedule_timeout+0x218/0x420
   [<00000000174af10c>] wait_for_common+0x104/0x1d8
   [<000003ff804d6994>] btrfs_qgroup_wait_for_completion+0x84/0xb0 [btrfs]
   [<000003ff8044a616>] close_ctree+0x4e/0x380 [btrfs]
   [<0000000016fa3136>] generic_shutdown_super+0x8e/0x158
   [<0000000016fa34d6>] kill_anon_super+0x26/0x40
   [<000003ff8041ba88>] btrfs_kill_super+0x28/0xc8 [btrfs]
   [<0000000016fa39f8>] deactivate_locked_super+0x68/0x98
   [<0000000016fcb198>] cleanup_mnt+0xc0/0x140
   [<0000000016d6a846>] task_work_run+0xc6/0x110
   [<0000000016d04f76>] do_notify_resume+0xae/0xb8
   [<00000000174b30ae>] system_call+0xe2/0x2c8

[CAUSE]
The problem happens when we have called qgroup_rescan_init(), but
not queued the worker. It can be caused mostly by error handling.

	Qgroup ioctl thread		|	Unmount thread
----------------------------------------+-----------------------------------
					|
btrfs_qgroup_rescan()			|
|- qgroup_rescan_init()			|
|  |- qgroup_rescan_running = true;	|
|					|
|- trans = btrfs_join_transaction()	|
|  Some error happened			|
|					|
|- btrfs_qgroup_rescan() returns error	|
   But qgroup_rescan_running == true;	|
					| close_ctree()
					| |- btrfs_qgroup_wait_for_completion()
					|    |- running == true;
					|    |- wait_for_completion();

btrfs_qgroup_rescan_worker is never queued, thus no one is going to wake
up close_ctree() and we get a deadlock.

All involved qgroup_rescan_init() callers are:

- btrfs_qgroup_rescan()
  The example above. It's possible to trigger the deadlock when error
  happened.

- btrfs_quota_enable()
  Not possible. Just after qgroup_rescan_init() we queue the work.

- btrfs_read_qgroup_config()
  It's possible to trigger the deadlock. It only init the work, the
  work queueing happens in btrfs_qgroup_rescan_resume().
  Thus if error happened in between, deadlock is possible.

We shouldn't set fs_info->qgroup_rescan_running just in
qgroup_rescan_init(), as at that stage we haven't yet queued qgroup
rescan worker to run.

[FIX]
Set qgroup_rescan_running before queueing the work, so that we ensure
the rescan work is queued when we wait for it.

Fixes: 8d9eddad1946 ("Btrfs: fix qgroup rescan worker initialization")
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ Change subject and cause analyse, use a smaller fix ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/qgroup.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 0cd043f03081e..cbd40826f5dcf 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1032,6 +1032,7 @@ out_add_root:
 	ret = qgroup_rescan_init(fs_info, 0, 1);
 	if (!ret) {
 	        qgroup_rescan_zero_tracking(fs_info);
+		fs_info->qgroup_rescan_running = true;
 	        btrfs_queue_work(fs_info->qgroup_rescan_workers,
 	                         &fs_info->qgroup_rescan_work);
 	}
@@ -2906,7 +2907,6 @@ qgroup_rescan_init(struct btrfs_fs_info *fs_info, u64 progress_objectid,
 		sizeof(fs_info->qgroup_rescan_progress));
 	fs_info->qgroup_rescan_progress.objectid = progress_objectid;
 	init_completion(&fs_info->qgroup_rescan_completion);
-	fs_info->qgroup_rescan_running = true;
 
 	spin_unlock(&fs_info->qgroup_lock);
 	mutex_unlock(&fs_info->qgroup_rescan_lock);
@@ -2972,8 +2972,11 @@ btrfs_qgroup_rescan(struct btrfs_fs_info *fs_info)
 
 	qgroup_rescan_zero_tracking(fs_info);
 
+	mutex_lock(&fs_info->qgroup_rescan_lock);
+	fs_info->qgroup_rescan_running = true;
 	btrfs_queue_work(fs_info->qgroup_rescan_workers,
 			 &fs_info->qgroup_rescan_work);
+	mutex_unlock(&fs_info->qgroup_rescan_lock);
 
 	return 0;
 }
@@ -3009,9 +3012,13 @@ int btrfs_qgroup_wait_for_completion(struct btrfs_fs_info *fs_info,
 void
 btrfs_qgroup_rescan_resume(struct btrfs_fs_info *fs_info)
 {
-	if (fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_RESCAN)
+	if (fs_info->qgroup_flags & BTRFS_QGROUP_STATUS_FLAG_RESCAN) {
+		mutex_lock(&fs_info->qgroup_rescan_lock);
+		fs_info->qgroup_rescan_running = true;
 		btrfs_queue_work(fs_info->qgroup_rescan_workers,
 				 &fs_info->qgroup_rescan_work);
+		mutex_unlock(&fs_info->qgroup_rescan_lock);
+	}
 }
 
 /*
-- 
2.20.1

[PATCH 4.19 039/146] btrfs: remove a BUG_ON() from merge_reloc_roots()

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 7b7b74315b24dc064bc1c683659061c3d48f8668 ]

This was pretty subtle, we default to reloc roots having 0 root refs, so
if we crash in the middle of the relocation they can just be deleted.
If we successfully complete the relocation operations we'll set our root
refs to 1 in prepare_to_merge() and then go on to merge_reloc_roots().

At prepare_to_merge() time if any of the reloc roots have a 0 reference
still, we will remove that reloc root from our reloc root rb tree, and
then clean it up later.

However this only happens if we successfully start a transaction.  If
we've aborted previously we will skip this step completely, and only
have reloc roots with a reference count of 0, but were never properly
removed from the reloc control's rb tree.

This isn't a problem per-se, our references are held by the list the
reloc roots are on, and by the original root the reloc root belongs to.
If we end up in this situation all the reloc roots will be added to the
dirty_reloc_list, and then properly dropped at that point.  The reloc
control will be free'd and the rb tree is no longer used.

There were two options when fixing this, one was to remove the BUG_ON(),
the other was to make prepare_to_merge() handle the case where we
couldn't start a trans handle.

IMO this is the cleaner solution.  I started with handling the error in
prepare_to_merge(), but it turned out super ugly.  And in the end this
BUG_ON() simply doesn't matter, the cleanup was happening properly, we
were just panicing because this BUG_ON() only matters in the success
case.  So I've opted to just remove it and add a comment where it was.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/relocation.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index f98913061a40c..6f4cb2db3b1a0 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -2434,7 +2434,21 @@ out:
 			free_reloc_roots(&reloc_roots);
 	}
 
-	BUG_ON(!RB_EMPTY_ROOT(&rc->reloc_root_tree.rb_root));
+	/*
+	 * We used to have
+	 *
+	 * BUG_ON(!RB_EMPTY_ROOT(&rc->reloc_root_tree.rb_root));
+	 *
+	 * here, but it's wrong.  If we fail to start the transaction in
+	 * prepare_to_merge() we will have only 0 ref reloc roots, none of which
+	 * have actually been removed from the reloc_root_tree rb tree.  This is
+	 * fine because we're bailing here, and we hold a reference on the root
+	 * for the list that holds it, so these roots will be cleaned up when we
+	 * do the reloc_dirty_list afterwards.  Meanwhile the root->reloc_root
+	 * will be cleaned up on unmount.
+	 *
+	 * The remaining nodes will be cleaned up by free_reloc_control.
+	 */
 }
 
 static void free_block_list(struct rb_root *blocks)
-- 
2.20.1

[PATCH 4.19 040/146] btrfs: track reloc roots based on their commit root bytenr

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit ea287ab157c2816bf12aad4cece41372f9d146b4 ]

We always search the commit root of the extent tree for looking up back
references, however we track the reloc roots based on their current
bytenr.

This is wrong, if we commit the transaction between relocating tree
blocks we could end up in this code in build_backref_tree

  if (key.objectid == key.offset) {
	  /*
	   * Only root blocks of reloc trees use backref
	   * pointing to itself.
	   */
	  root = find_reloc_root(rc, cur->bytenr);
	  ASSERT(root);
	  cur->root = root;
	  break;
  }

find_reloc_root() is looking based on the bytenr we had in the commit
root, but if we've COWed this reloc root we will not find that bytenr,
and we will trip over the ASSERT(root).

Fix this by using the commit_root->start bytenr for indexing the commit
root.  Then we change the __update_reloc_root() caller to be used when
we switch the commit root for the reloc root during commit.

This fixes the panic I was seeing when we started throttling relocation
for delayed refs.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/relocation.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 6f4cb2db3b1a0..a7f9aa5f05aa5 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1253,7 +1253,7 @@ static int __must_check __add_reloc_root(struct btrfs_root *root)
 	if (!node)
 		return -ENOMEM;
 
-	node->bytenr = root->node->start;
+	node->bytenr = root->commit_root->start;
 	node->data = root;
 
 	spin_lock(&rc->reloc_root_tree.lock);
@@ -1284,10 +1284,11 @@ static void __del_reloc_root(struct btrfs_root *root)
 	if (rc && root->node) {
 		spin_lock(&rc->reloc_root_tree.lock);
 		rb_node = tree_search(&rc->reloc_root_tree.rb_root,
-				      root->node->start);
+				      root->commit_root->start);
 		if (rb_node) {
 			node = rb_entry(rb_node, struct mapping_node, rb_node);
 			rb_erase(&node->rb_node, &rc->reloc_root_tree.rb_root);
+			RB_CLEAR_NODE(&node->rb_node);
 		}
 		spin_unlock(&rc->reloc_root_tree.lock);
 		if (!node)
@@ -1305,7 +1306,7 @@ static void __del_reloc_root(struct btrfs_root *root)
  * helper to update the 'address of tree root -> reloc tree'
  * mapping
  */
-static int __update_reloc_root(struct btrfs_root *root, u64 new_bytenr)
+static int __update_reloc_root(struct btrfs_root *root)
 {
 	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct rb_node *rb_node;
@@ -1314,7 +1315,7 @@ static int __update_reloc_root(struct btrfs_root *root, u64 new_bytenr)
 
 	spin_lock(&rc->reloc_root_tree.lock);
 	rb_node = tree_search(&rc->reloc_root_tree.rb_root,
-			      root->node->start);
+			      root->commit_root->start);
 	if (rb_node) {
 		node = rb_entry(rb_node, struct mapping_node, rb_node);
 		rb_erase(&node->rb_node, &rc->reloc_root_tree.rb_root);
@@ -1326,7 +1327,7 @@ static int __update_reloc_root(struct btrfs_root *root, u64 new_bytenr)
 	BUG_ON((struct btrfs_root *)node->data != root);
 
 	spin_lock(&rc->reloc_root_tree.lock);
-	node->bytenr = new_bytenr;
+	node->bytenr = root->node->start;
 	rb_node = tree_insert(&rc->reloc_root_tree.rb_root,
 			      node->bytenr, &node->rb_node);
 	spin_unlock(&rc->reloc_root_tree.lock);
@@ -1471,6 +1472,7 @@ int btrfs_update_reloc_root(struct btrfs_trans_handle *trans,
 	}
 
 	if (reloc_root->commit_root != reloc_root->node) {
+		__update_reloc_root(reloc_root);
 		btrfs_set_root_node(root_item, reloc_root->node);
 		free_extent_buffer(reloc_root->commit_root);
 		reloc_root->commit_root = btrfs_root_node(reloc_root);
@@ -4599,11 +4601,6 @@ int btrfs_reloc_cow_block(struct btrfs_trans_handle *trans,
 	BUG_ON(rc->stage == UPDATE_DATA_PTRS &&
 	       root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID);
 
-	if (root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) {
-		if (buf == root->node)
-			__update_reloc_root(root, cow->start);
-	}
-
 	level = btrfs_header_level(buf);
 	if (btrfs_header_generation(buf) <=
 	    btrfs_root_last_snapshot(&root->root_item))
-- 
2.20.1

[PATCH 4.19 041/146] IB/mlx5: Replace tunnel mpls capability bits for tunnel_offloads

[Greg Kroah-Hartman]

From: Alex Vesker <valex@mellanox.com>

[ Upstream commit 41e684ef3f37ce6e5eac3fb5b9c7c1853f4b0447 ]

Until now the flex parser capability was used in ib_query_device() to
indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp.

Newer devices and firmware will have configurations with the flexparser
but without mpls support.

Testing for the flex parser capability was a mistake, the tunnel_stateless
capability was intended for detecting mpls and was introduced at the same
time as the flex parser capability.

Otherwise userspace will be incorrectly informed that a future device
supports MPLS when it does not.

Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.17
Fixes: e818e255a58d ("IB/mlx5: Expose MPLS related tunneling offloads")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/main.c | 6 ++----
 include/linux/mlx5/mlx5_ifc.h     | 9 ++++++++-
 2 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 2db34f7b5ced1..f41f3ff689c55 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -1070,12 +1070,10 @@ static int mlx5_ib_query_device(struct ib_device *ibdev,
 		if (MLX5_CAP_ETH(mdev, tunnel_stateless_gre))
 			resp.tunnel_offloads_caps |=
 				MLX5_IB_TUNNELED_OFFLOADS_GRE;
-		if (MLX5_CAP_GEN(mdev, flex_parser_protocols) &
-		    MLX5_FLEX_PROTO_CW_MPLS_GRE)
+		if (MLX5_CAP_ETH(mdev, tunnel_stateless_mpls_over_gre))
 			resp.tunnel_offloads_caps |=
 				MLX5_IB_TUNNELED_OFFLOADS_MPLS_GRE;
-		if (MLX5_CAP_GEN(mdev, flex_parser_protocols) &
-		    MLX5_FLEX_PROTO_CW_MPLS_UDP)
+		if (MLX5_CAP_ETH(mdev, tunnel_stateless_mpls_over_udp))
 			resp.tunnel_offloads_caps |=
 				MLX5_IB_TUNNELED_OFFLOADS_MPLS_UDP;
 	}
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 76b76b6aa83d0..b87b1569d15b5 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -672,7 +672,14 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits {
 	u8         swp[0x1];
 	u8         swp_csum[0x1];
 	u8         swp_lso[0x1];
-	u8         reserved_at_23[0xd];
+	u8         cqe_checksum_full[0x1];
+	u8         tunnel_stateless_geneve_tx[0x1];
+	u8         tunnel_stateless_mpls_over_udp[0x1];
+	u8         tunnel_stateless_mpls_over_gre[0x1];
+	u8         tunnel_stateless_vxlan_gpe[0x1];
+	u8         tunnel_stateless_ipv4_over_vxlan[0x1];
+	u8         tunnel_stateless_ip_over_ip[0x1];
+	u8         reserved_at_2a[0x6];
 	u8         max_vxlan_udp_ports[0x8];
 	u8         reserved_at_38[0x6];
 	u8         max_geneve_opt_len[0x1];
-- 
2.20.1

[PATCH 4.19 042/146] uapi: rename ext2_swab() to swab() and share globally in swab.h

[Greg Kroah-Hartman]

From: Yury Norov <yury.norov@gmail.com>

[ Upstream commit d5767057c9a76a29f073dad66b7fa12a90e8c748 ]

ext2_swab() is defined locally in lib/find_bit.c However it is not
specific to ext2, neither to bitmaps.

There are many potential users of it, so rename it to just swab() and
move to include/uapi/linux/swab.h

ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG,
therefore drop unneeded cast.

Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/swab.h      |  1 +
 include/uapi/linux/swab.h | 10 ++++++++++
 lib/find_bit.c            | 16 ++--------------
 3 files changed, 13 insertions(+), 14 deletions(-)

diff --git a/include/linux/swab.h b/include/linux/swab.h
index e466fd159c857..bcff5149861a9 100644
--- a/include/linux/swab.h
+++ b/include/linux/swab.h
@@ -7,6 +7,7 @@
 # define swab16 __swab16
 # define swab32 __swab32
 # define swab64 __swab64
+# define swab __swab
 # define swahw32 __swahw32
 # define swahb32 __swahb32
 # define swab16p __swab16p
diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h
index 23cd84868cc3b..fa7f97da5b768 100644
--- a/include/uapi/linux/swab.h
+++ b/include/uapi/linux/swab.h
@@ -4,6 +4,7 @@
 
 #include <linux/types.h>
 #include <linux/compiler.h>
+#include <asm/bitsperlong.h>
 #include <asm/swab.h>
 
 /*
@@ -132,6 +133,15 @@ static inline __attribute_const__ __u32 __fswahb32(__u32 val)
 	__fswab64(x))
 #endif
 
+static __always_inline unsigned long __swab(const unsigned long y)
+{
+#if BITS_PER_LONG == 64
+	return __swab64(y);
+#else /* BITS_PER_LONG == 32 */
+	return __swab32(y);
+#endif
+}
+
 /**
  * __swahw32 - return a word-swapped 32-bit value
  * @x: value to wordswap
diff --git a/lib/find_bit.c b/lib/find_bit.c
index ee3df93ba69af..8a5492173267d 100644
--- a/lib/find_bit.c
+++ b/lib/find_bit.c
@@ -153,18 +153,6 @@ EXPORT_SYMBOL(find_last_bit);
 
 #ifdef __BIG_ENDIAN
 
-/* include/linux/byteorder does not support "unsigned long" type */
-static inline unsigned long ext2_swab(const unsigned long y)
-{
-#if BITS_PER_LONG == 64
-	return (unsigned long) __swab64((u64) y);
-#elif BITS_PER_LONG == 32
-	return (unsigned long) __swab32((u32) y);
-#else
-#error BITS_PER_LONG not defined
-#endif
-}
-
 #if !defined(find_next_bit_le) || !defined(find_next_zero_bit_le)
 static inline unsigned long _find_next_bit_le(const unsigned long *addr1,
 		const unsigned long *addr2, unsigned long nbits,
@@ -181,7 +169,7 @@ static inline unsigned long _find_next_bit_le(const unsigned long *addr1,
 	tmp ^= invert;
 
 	/* Handle 1st word. */
-	tmp &= ext2_swab(BITMAP_FIRST_WORD_MASK(start));
+	tmp &= swab(BITMAP_FIRST_WORD_MASK(start));
 	start = round_down(start, BITS_PER_LONG);
 
 	while (!tmp) {
@@ -195,7 +183,7 @@ static inline unsigned long _find_next_bit_le(const unsigned long *addr1,
 		tmp ^= invert;
 	}
 
-	return min(start + __ffs(ext2_swab(tmp)), nbits);
+	return min(start + __ffs(swab(tmp)), nbits);
 }
 #endif
 
-- 
2.20.1

[PATCH 4.19 043/146] slub: improve bit diffusion for freelist ptr obfuscation

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 1ad53d9fa3f6168ebcf48a50e08b170432da2257 upstream.

Under CONFIG_SLAB_FREELIST_HARDENED=y, the obfuscation was relatively weak
in that the ptr and ptr address were usually so close that the first XOR
would result in an almost entirely 0-byte value[1], leaving most of the
"secret" number ultimately being stored after the third XOR.  A single
blind memory content exposure of the freelist was generally sufficient to
learn the secret.

Add a swab() call to mix bits a little more.  This is a cheap way (1
cycle) to make attacks need more than a single exposure to learn the
secret (or to know _where_ the exposure is in memory).

kmalloc-32 freelist walk, before:

ptr              ptr_addr            stored value      secret
ffff90c22e019020@ffff90c22e019000 is 86528eb656b3b5bd (86528eb656b3b59d)
ffff90c22e019040@ffff90c22e019020 is 86528eb656b3b5fd (86528eb656b3b59d)
ffff90c22e019060@ffff90c22e019040 is 86528eb656b3b5bd (86528eb656b3b59d)
ffff90c22e019080@ffff90c22e019060 is 86528eb656b3b57d (86528eb656b3b59d)
ffff90c22e0190a0@ffff90c22e019080 is 86528eb656b3b5bd (86528eb656b3b59d)
...

after:

ptr              ptr_addr            stored value      secret
ffff9eed6e019020@ffff9eed6e019000 is 793d1135d52cda42 (86528eb656b3b59d)
ffff9eed6e019040@ffff9eed6e019020 is 593d1135d52cda22 (86528eb656b3b59d)
ffff9eed6e019060@ffff9eed6e019040 is 393d1135d52cda02 (86528eb656b3b59d)
ffff9eed6e019080@ffff9eed6e019060 is 193d1135d52cdae2 (86528eb656b3b59d)
ffff9eed6e0190a0@ffff9eed6e019080 is f93d1135d52cdac2 (86528eb656b3b59d)

[1] https://blog.infosectcbr.com.au/2020/03/weaknesses-in-linux-kernel-heap.html

Fixes: 2482ddec670f ("mm: add SLUB free list pointer obfuscation")
Reported-by: Silvio Cesare <silvio.cesare@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/202003051623.AF4F8CB@keescook
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[kees: Backport to v4.19 which doesn't call kasan_reset_untag()]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/slub.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/slub.c
+++ b/mm/slub.c
@@ -249,7 +249,7 @@ static inline void *freelist_ptr(const s
 				 unsigned long ptr_addr)
 {
 #ifdef CONFIG_SLAB_FREELIST_HARDENED
-	return (void *)((unsigned long)ptr ^ s->random ^ ptr_addr);
+	return (void *)((unsigned long)ptr ^ s->random ^ swab(ptr_addr));
 #else
 	return ptr;
 #endif

[PATCH 4.19 044/146] ASoC: fix regwmask

[Greg Kroah-Hartman]

From: 이경택 <gt82.lee@samsung.com>

commit 0ab070917afdc93670c2d0ea02ab6defb6246a7c upstream.

If regwshift is 32 and the selected architecture compiles '<<' operator
for signed int literal into rotating shift, '1<<regwshift' became 1 and
it makes regwmask to 0x0.
The literal is set to unsigned long to get intended regwmask.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/001001d60665$db7af3e0$9270dba0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/soc-ops.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -832,7 +832,7 @@ int snd_soc_get_xr_sx(struct snd_kcontro
 	unsigned int regbase = mc->regbase;
 	unsigned int regcount = mc->regcount;
 	unsigned int regwshift = component->val_bytes * BITS_PER_BYTE;
-	unsigned int regwmask = (1<<regwshift)-1;
+	unsigned int regwmask = (1UL<<regwshift)-1;
 	unsigned int invert = mc->invert;
 	unsigned long mask = (1UL<<mc->nbits)-1;
 	long min = mc->min;
@@ -881,7 +881,7 @@ int snd_soc_put_xr_sx(struct snd_kcontro
 	unsigned int regbase = mc->regbase;
 	unsigned int regcount = mc->regcount;
 	unsigned int regwshift = component->val_bytes * BITS_PER_BYTE;
-	unsigned int regwmask = (1<<regwshift)-1;
+	unsigned int regwmask = (1UL<<regwshift)-1;
 	unsigned int invert = mc->invert;
 	unsigned long mask = (1UL<<mc->nbits)-1;
 	long max = mc->max;

[PATCH 4.19 045/146] ASoC: dapm: connect virtual mux with default value

[Greg Kroah-Hartman]

From: 이경택 <gt82.lee@samsung.com>

commit 3bbbb7728fc853d71dbce4073fef9f281fbfb4dd upstream.

Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/01a301d60731$b724ea10$256ebe30$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/soc-dapm.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -792,7 +792,13 @@ static void dapm_set_mixer_path_status(s
 			val = max - val;
 		p->connect = !!val;
 	} else {
-		p->connect = 0;
+		/* since a virtual mixer has no backing registers to
+		 * decide which path to connect, it will try to match
+		 * with initial state.  This is to ensure
+		 * that the default mixer choice will be
+		 * correctly powered up during initialization.
+		 */
+		p->connect = invert;
 	}
 }
 

[PATCH 4.19 046/146] ASoC: dpcm: allow start or stop during pause for backend

[Greg Kroah-Hartman]

From: 이경택 <gt82.lee@samsung.com>

commit 21fca8bdbb64df1297e8c65a746c4c9f4a689751 upstream.

soc_compr_trigger_fe() allows start or stop after pause_push.
In dpcm_be_dai_trigger(), however, only pause_release is allowed
command after pause_push.
So, start or stop after pause in compress offload is always
returned as error if the compress offload is used with dpcm.
To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed
for start or stop command.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/soc-pcm.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -2266,7 +2266,8 @@ int dpcm_be_dai_trigger(struct snd_soc_p
 		switch (cmd) {
 		case SNDRV_PCM_TRIGGER_START:
 			if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_PREPARE) &&
-			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP))
+			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP) &&
+			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED))
 				continue;
 
 			ret = dpcm_do_trigger(dpcm, be_substream, cmd);
@@ -2296,7 +2297,8 @@ int dpcm_be_dai_trigger(struct snd_soc_p
 			be->dpcm[stream].state = SND_SOC_DPCM_STATE_START;
 			break;
 		case SNDRV_PCM_TRIGGER_STOP:
-			if (be->dpcm[stream].state != SND_SOC_DPCM_STATE_START)
+			if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_START) &&
+			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED))
 				continue;
 
 			if (!snd_soc_dpcm_can_be_free_stop(fe, be, stream))

[PATCH 4.19 047/146] ASoC: topology: use name_prefix for new kcontrol

[Greg Kroah-Hartman]

From: 이경택 <gt82.lee@samsung.com>

commit abca9e4a04fbe9c6df4d48ca7517e1611812af25 upstream.

Current topology doesn't add prefix of component to new kcontrol.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/009b01d60804$ae25c2d0$0a714870$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/soc-topology.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -364,7 +364,7 @@ static int soc_tplg_add_kcontrol(struct
 	struct snd_soc_component *comp = tplg->comp;
 
 	return soc_tplg_add_dcontrol(comp->card->snd_card,
-				comp->dev, k, NULL, comp, kcontrol);
+				comp->dev, k, comp->name_prefix, comp, kcontrol);
 }
 
 /* remove a mixer kcontrol */

[PATCH 4.19 048/146] usb: gadget: f_fs: Fix use after free issue as part of queue failure

[Greg Kroah-Hartman]

From: Sriharsha Allenki <sallenki@codeaurora.org>

commit f63ec55ff904b2f2e126884fcad93175f16ab4bb upstream.

In AIO case, the request is freed up if ep_queue fails.
However, io_data->req still has the reference to this freed
request. In the case of this failure if there is aio_cancel
call on this io_data it will lead to an invalid dequeue
operation and a potential use after free issue.
Fix this by setting the io_data->req to NULL when the request
is freed as part of queue failure.

Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support")
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
CC: stable <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200326115620.12571-1-sallenki@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_fs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1036,6 +1036,7 @@ static ssize_t ffs_epfile_io(struct file
 
 		ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC);
 		if (unlikely(ret)) {
+			io_data->req = NULL;
 			usb_ep_free_request(ep->ep, req);
 			goto error_lock;
 		}

[PATCH 4.19 049/146] usb: gadget: composite: Inform controller driver of self-powered

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit 5e5caf4fa8d3039140b4548b6ab23dd17fce9b2c upstream.

Different configuration/condition may draw different power. Inform the
controller driver of the change so it can respond properly (e.g.
GET_STATUS request). This fixes an issue with setting MaxPower from
configfs. The composite driver doesn't check this value when setting
self-powered.

Cc: stable@vger.kernel.org
Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/composite.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -847,6 +847,11 @@ static int set_config(struct usb_composi
 	else
 		power = min(power, 900U);
 done:
+	if (power <= USB_SELF_POWER_VBUS_MAX_DRAW)
+		usb_gadget_set_selfpowered(gadget);
+	else
+		usb_gadget_clear_selfpowered(gadget);
+
 	usb_gadget_vbus_draw(gadget, power);
 	if (result >= 0 && cdev->delayed_status)
 		result = USB_GADGET_DELAYED_STATUS;
@@ -2265,6 +2270,7 @@ void composite_suspend(struct usb_gadget
 
 	cdev->suspended = 1;
 
+	usb_gadget_set_selfpowered(gadget);
 	usb_gadget_vbus_draw(gadget, 2);
 }
 
@@ -2293,6 +2299,9 @@ void composite_resume(struct usb_gadget
 		else
 			maxpower = min(maxpower, 900U);
 
+		if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW)
+			usb_gadget_clear_selfpowered(gadget);
+
 		usb_gadget_vbus_draw(gadget, maxpower);
 	}
 

[PATCH 4.19 050/146] ALSA: usb-audio: Add mixer workaround for TRX40 and co

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 2a48218f8e23d47bd3e23cfdfb8aa9066f7dc3e6 upstream.

Some recent boards (supposedly with a new AMD platform) contain the
USB audio class 2 device that is often tied with HD-audio.  The device
exposes an Input Gain Pad control (id=19, control=12) but this node
doesn't behave correctly, returning an error for each inquiry of
GET_MIN and GET_MAX that should have been mandatory.

As a workaround, simply ignore this node by adding a usbmix_name_map
table entry.  The currently known devices are:
* 0414:a002 - Gigabyte TRX40 Aorus Pro WiFi
* 0b05:1916 - ASUS ROG Zenith II
* 0b05:1917 - ASUS ROG Strix
* 0db0:0d64 - MSI TRX40 Creator
* 0db0:543d - MSI TRX40

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer_maps.c |   28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -363,6 +363,14 @@ static const struct usbmix_name_map dell
 	{ 0 }
 };
 
+/* Some mobos shipped with a dummy HD-audio show the invalid GET_MIN/GET_MAX
+ * response for Input Gain Pad (id=19, control=12).  Skip it.
+ */
+static const struct usbmix_name_map asus_rog_map[] = {
+	{ 19, NULL, 12 }, /* FU, Input Gain Pad */
+	{}
+};
+
 /*
  * Control map entries
  */
@@ -482,6 +490,26 @@ static struct usbmix_ctl_map usbmix_ctl_
 		.id = USB_ID(0x05a7, 0x1020),
 		.map = bose_companion5_map,
 	},
+	{	/* Gigabyte TRX40 Aorus Pro WiFi */
+		.id = USB_ID(0x0414, 0xa002),
+		.map = asus_rog_map,
+	},
+	{	/* ASUS ROG Zenith II */
+		.id = USB_ID(0x0b05, 0x1916),
+		.map = asus_rog_map,
+	},
+	{	/* ASUS ROG Strix */
+		.id = USB_ID(0x0b05, 0x1917),
+		.map = asus_rog_map,
+	},
+	{	/* MSI TRX40 Creator */
+		.id = USB_ID(0x0db0, 0x0d64),
+		.map = asus_rog_map,
+	},
+	{	/* MSI TRX40 */
+		.id = USB_ID(0x0db0, 0x543d),
+		.map = asus_rog_map,
+	},
 	{ 0 } /* terminator */
 };
 

[PATCH 4.19 051/146] ALSA: hda: Add driver blacklist

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 3c6fd1f07ed03a04debbb9a9d782205f1ef5e2ab upstream.

The recent AMD platform exposes an HD-audio bus but without any actual
codecs, which is internally tied with a USB-audio device, supposedly.
It results in "no codecs" error of HD-audio bus driver, and it's
nothing but a waste of resources.

This patch introduces a static blacklist table for skipping such a
known bogus PCI SSID entry.  As of writing this patch, the known SSIDs
are:
* 1043:874f - ASUS ROG Zenith II / Strix
* 1462:cb59 - MSI TRX40 Creator
* 1462:cb60 - MSI TRX40

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_intel.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2219,6 +2219,17 @@ static const struct hdac_io_ops pci_hda_
 	.dma_free_pages = dma_free_pages,
 };
 
+/* Blacklist for skipping the whole probe:
+ * some HD-audio PCI entries are exposed without any codecs, and such devices
+ * should be ignored from the beginning.
+ */
+static const struct snd_pci_quirk driver_blacklist[] = {
+	SND_PCI_QUIRK(0x1043, 0x874f, "ASUS ROG Zenith II / Strix", 0),
+	SND_PCI_QUIRK(0x1462, 0xcb59, "MSI TRX40 Creator", 0),
+	SND_PCI_QUIRK(0x1462, 0xcb60, "MSI TRX40", 0),
+	{}
+};
+
 static const struct hda_controller_ops pci_hda_ops = {
 	.disable_msi_reset_irq = disable_msi_reset_irq,
 	.substream_alloc_pages = substream_alloc_pages,
@@ -2238,6 +2249,11 @@ static int azx_probe(struct pci_dev *pci
 	bool schedule_probe;
 	int err;
 
+	if (snd_pci_quirk_lookup(pci, driver_blacklist)) {
+		dev_info(&pci->dev, "Skipping the blacklisted device\n");
+		return -ENODEV;
+	}
+
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
 	if (!enable[dev]) {

[PATCH 4.19 052/146] ALSA: hda: Fix potential access overflow in beep helper

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 0ad3f0b384d58f3bd1f4fb87d0af5b8f6866f41a upstream.

The beep control helper function blindly stores the values in two
stereo channels no matter whether the actual control is mono or
stereo.  This is practically harmless, but it annoys the recently
introduced sanity check, resulting in an error when the checker is
enabled.

This patch corrects the behavior to store only on the defined array
member.

Fixes: 0401e8548eac ("ALSA: hda - Move beep helper functions to hda_beep.c")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_beep.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -297,8 +297,12 @@ int snd_hda_mixer_amp_switch_get_beep(st
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct hda_beep *beep = codec->beep;
+	int chs = get_amp_channels(kcontrol);
+
 	if (beep && (!beep->enabled || !ctl_has_mute(kcontrol))) {
-		ucontrol->value.integer.value[0] =
+		if (chs & 1)
+			ucontrol->value.integer.value[0] = beep->enabled;
+		if (chs & 2)
 			ucontrol->value.integer.value[1] = beep->enabled;
 		return 0;
 	}

[PATCH 4.19 053/146] ALSA: ice1724: Fix invalid access for enumerated ctl items

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit c47914c00be346bc5b48c48de7b0da5c2d1a296c upstream.

The access to Analog Capture Source control value implemented in
prodigy_hifi.c is wrong, as caught by the recently introduced sanity
check; it should be accessing value.enumerated.item[] instead of
value.integer.value[].  This patch corrects the wrong access pattern.

Fixes: 6b8d6e5518e2 ("[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules Fortissimo IV")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/ice1712/prodigy_hifi.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/pci/ice1712/prodigy_hifi.c
+++ b/sound/pci/ice1712/prodigy_hifi.c
@@ -550,7 +550,7 @@ static int wm_adc_mux_enum_get(struct sn
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 
 	mutex_lock(&ice->gpio_mutex);
-	ucontrol->value.integer.value[0] = wm_get(ice, WM_ADC_MUX) & 0x1f;
+	ucontrol->value.enumerated.item[0] = wm_get(ice, WM_ADC_MUX) & 0x1f;
 	mutex_unlock(&ice->gpio_mutex);
 	return 0;
 }
@@ -564,7 +564,7 @@ static int wm_adc_mux_enum_put(struct sn
 
 	mutex_lock(&ice->gpio_mutex);
 	oval = wm_get(ice, WM_ADC_MUX);
-	nval = (oval & 0xe0) | ucontrol->value.integer.value[0];
+	nval = (oval & 0xe0) | ucontrol->value.enumerated.item[0];
 	if (nval != oval) {
 		wm_put(ice, WM_ADC_MUX, nval);
 		change = 1;

[PATCH 4.19 054/146] ALSA: pcm: oss: Fix regression by buffer overflow fix

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit ae769d3556644888c964635179ef192995f40793 upstream.

The recent fix for the OOB access in PCM OSS plugins (commit
f2ecf903ef06: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a
regression on OSS applications.  The patch introduced the size check
in client and slave size calculations to limit to each plugin's buffer
size, but I overlooked that some code paths call those without
allocating the buffer but just for estimation.

This patch fixes the bug by skipping the size check for those code
paths while keeping checking in the actual transfer calls.

Fixes: f2ecf903ef06 ("ALSA: pcm: oss: Avoid plugin buffer overflow")
Tested-and-reported-by: Jari Ruusu <jari.ruusu@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200403072515.25539-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/oss/pcm_plugin.c |   32 ++++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

--- a/sound/core/oss/pcm_plugin.c
+++ b/sound/core/oss/pcm_plugin.c
@@ -196,7 +196,9 @@ int snd_pcm_plugin_free(struct snd_pcm_p
 	return 0;
 }
 
-snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *plug, snd_pcm_uframes_t drv_frames)
+static snd_pcm_sframes_t plug_client_size(struct snd_pcm_substream *plug,
+					  snd_pcm_uframes_t drv_frames,
+					  bool check_size)
 {
 	struct snd_pcm_plugin *plugin, *plugin_prev, *plugin_next;
 	int stream;
@@ -209,7 +211,7 @@ snd_pcm_sframes_t snd_pcm_plug_client_si
 	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		plugin = snd_pcm_plug_last(plug);
 		while (plugin && drv_frames > 0) {
-			if (drv_frames > plugin->buf_frames)
+			if (check_size && drv_frames > plugin->buf_frames)
 				drv_frames = plugin->buf_frames;
 			plugin_prev = plugin->prev;
 			if (plugin->src_frames)
@@ -222,7 +224,7 @@ snd_pcm_sframes_t snd_pcm_plug_client_si
 			plugin_next = plugin->next;
 			if (plugin->dst_frames)
 				drv_frames = plugin->dst_frames(plugin, drv_frames);
-			if (drv_frames > plugin->buf_frames)
+			if (check_size && drv_frames > plugin->buf_frames)
 				drv_frames = plugin->buf_frames;
 			plugin = plugin_next;
 		}
@@ -231,7 +233,9 @@ snd_pcm_sframes_t snd_pcm_plug_client_si
 	return drv_frames;
 }
 
-snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *plug, snd_pcm_uframes_t clt_frames)
+static snd_pcm_sframes_t plug_slave_size(struct snd_pcm_substream *plug,
+					 snd_pcm_uframes_t clt_frames,
+					 bool check_size)
 {
 	struct snd_pcm_plugin *plugin, *plugin_prev, *plugin_next;
 	snd_pcm_sframes_t frames;
@@ -252,14 +256,14 @@ snd_pcm_sframes_t snd_pcm_plug_slave_siz
 				if (frames < 0)
 					return frames;
 			}
-			if (frames > plugin->buf_frames)
+			if (check_size && frames > plugin->buf_frames)
 				frames = plugin->buf_frames;
 			plugin = plugin_next;
 		}
 	} else if (stream == SNDRV_PCM_STREAM_CAPTURE) {
 		plugin = snd_pcm_plug_last(plug);
 		while (plugin) {
-			if (frames > plugin->buf_frames)
+			if (check_size && frames > plugin->buf_frames)
 				frames = plugin->buf_frames;
 			plugin_prev = plugin->prev;
 			if (plugin->src_frames) {
@@ -274,6 +278,18 @@ snd_pcm_sframes_t snd_pcm_plug_slave_siz
 	return frames;
 }
 
+snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *plug,
+					   snd_pcm_uframes_t drv_frames)
+{
+	return plug_client_size(plug, drv_frames, false);
+}
+
+snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *plug,
+					  snd_pcm_uframes_t clt_frames)
+{
+	return plug_slave_size(plug, clt_frames, false);
+}
+
 static int snd_pcm_plug_formats(const struct snd_mask *mask,
 				snd_pcm_format_t format)
 {
@@ -630,7 +646,7 @@ snd_pcm_sframes_t snd_pcm_plug_write_tra
 		src_channels = dst_channels;
 		plugin = next;
 	}
-	return snd_pcm_plug_client_size(plug, frames);
+	return plug_client_size(plug, frames, true);
 }
 
 snd_pcm_sframes_t snd_pcm_plug_read_transfer(struct snd_pcm_substream *plug, struct snd_pcm_plugin_channel *dst_channels_final, snd_pcm_uframes_t size)
@@ -640,7 +656,7 @@ snd_pcm_sframes_t snd_pcm_plug_read_tran
 	snd_pcm_sframes_t frames = size;
 	int err;
 
-	frames = snd_pcm_plug_slave_size(plug, frames);
+	frames = plug_slave_size(plug, frames, true);
 	if (frames < 0)
 		return frames;
 

[PATCH 4.19 055/146] ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256

[Greg Kroah-Hartman]

From: Thomas Hebb <tommyhebb@gmail.com>

commit f128090491c3f5aacef91a863f8c52abf869c436 upstream.

This codec (among others) has a hidden set of audio routes, apparently
designed to allow PC Beep output without a mixer widget on the output
path, which are controlled by an undocumented Realtek vendor register.
The default configuration of these routes means that certain inputs
aren't accessible, necessitating driver control of the register.
However, Realtek has provided no documentation of the register, instead
opting to fix issues by providing magic numbers, most of which have been
at least somewhat erroneous. These magic numbers then get copied by
others into model-specific fixups, leading to a fragmented and buggy set
of configurations.

To get out of this situation, I've reverse engineered the register by
flipping bits and observing how the codec's behavior changes. This
commit documents my findings. It does not change any code.

Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/bd69dfdeaf40ff31c4b7b797c829bb320031739c.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/sound/hd-audio/index.rst           |    1 
 Documentation/sound/hd-audio/realtek-pc-beep.rst |  129 +++++++++++++++++++++++
 2 files changed, 130 insertions(+)

--- a/Documentation/sound/hd-audio/index.rst
+++ b/Documentation/sound/hd-audio/index.rst
@@ -8,3 +8,4 @@ HD-Audio
    models
    controls
    dp-mst
+   realtek-pc-beep
--- /dev/null
+++ b/Documentation/sound/hd-audio/realtek-pc-beep.rst
@@ -0,0 +1,129 @@
+===============================
+Realtek PC Beep Hidden Register
+===============================
+
+This file documents the "PC Beep Hidden Register", which is present in certain
+Realtek HDA codecs and controls a muxer and pair of passthrough mixers that can
+route audio between pins but aren't themselves exposed as HDA widgets. As far
+as I can tell, these hidden routes are designed to allow flexible PC Beep output
+for codecs that don't have mixer widgets in their output paths. Why it's easier
+to hide a mixer behind an undocumented vendor register than to just expose it
+as a widget, I have no idea.
+
+Register Description
+====================
+
+The register is accessed via processing coefficient 0x36 on NID 20h. Bits not
+identified below have no discernible effect on my machine, a Dell XPS 13 9350::
+
+  MSB                           LSB
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  | |h|S|L|         | B |R|       | Known bits
+  +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+  |0|0|1|1|  0x7  |0|0x0|1|  0x7  | Reset value
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+1Ah input select (B): 2 bits
+  When zero, expose the PC Beep line (from the internal beep generator, when
+  enabled with the Set Beep Generation verb on NID 01h, or else from the
+  external PCBEEP pin) on the 1Ah pin node. When nonzero, expose the headphone
+  jack (or possibly Line In on some machines) input instead. If PC Beep is
+  selected, the 1Ah boost control has no effect.
+
+Amplify 1Ah loopback, left (L): 1 bit
+  Amplify the left channel of 1Ah before mixing it into outputs as specified
+  by h and S bits. Does not affect the level of 1Ah exposed to other widgets.
+
+Amplify 1Ah loopback, right (R): 1 bit
+  Amplify the right channel of 1Ah before mixing it into outputs as specified
+  by h and S bits. Does not affect the level of 1Ah exposed to other widgets.
+
+Loopback 1Ah to 21h [active low] (h): 1 bit
+  When zero, mix 1Ah (possibly with amplification, depending on L and R bits)
+  into 21h (headphone jack on my machine). Mixed signal respects the mute
+  setting on 21h.
+
+Loopback 1Ah to 14h (S): 1 bit
+  When one, mix 1Ah (possibly with amplification, depending on L and R bits)
+  into 14h (internal speaker on my machine). Mixed signal **ignores** the mute
+  setting on 14h and is present whenever 14h is configured as an output.
+
+Path diagrams
+=============
+
+1Ah input selection (DIV is the PC Beep divider set on NID 01h)::
+
+  <Beep generator>   <PCBEEP pin>    <Headphone jack>
+          |                |                |
+          +--DIV--+--!DIV--+       {1Ah boost control}
+                  |                         |
+                  +--(b == 0)--+--(b != 0)--+
+                               |
+               >1Ah (Beep/Headphone Mic/Line In)<
+
+Loopback of 1Ah to 21h/14h::
+
+               <1Ah (Beep/Headphone Mic/Line In)>
+                               |
+                        {amplify if L/R}
+                               |
+                  +-----!h-----+-----S-----+
+                  |                        |
+          {21h mute control}               |
+                  |                        |
+          >21h (Headphone)<     >14h (Internal Speaker)<
+
+Background
+==========
+
+All Realtek HDA codecs have a vendor-defined widget with node ID 20h which
+provides access to a bank of registers that control various codec functions.
+Registers are read and written via the standard HDA processing coefficient
+verbs (Set/Get Coefficient Index, Set/Get Processing Coefficient). The node is
+named "Realtek Vendor Registers" in public datasheets' verb listings and,
+apart from that, is entirely undocumented.
+
+This particular register, exposed at coefficient 0x36 and named in commits from
+Realtek, is of note: unlike most registers, which seem to control detailed
+amplifier parameters not in scope of the HDA specification, it controls audio
+routing which could just as easily have been defined using standard HDA mixer
+and selector widgets.
+
+Specifically, it selects between two sources for the input pin widget with Node
+ID (NID) 1Ah: the widget's signal can come either from an audio jack (on my
+laptop, a Dell XPS 13 9350, it's the headphone jack, but comments in Realtek
+commits indicate that it might be a Line In on some machines) or from the PC
+Beep line (which is itself multiplexed between the codec's internal beep
+generator and external PCBEEP pin, depending on if the beep generator is
+enabled via verbs on NID 01h). Additionally, it can mix (with optional
+amplification) that signal onto the 21h and/or 14h output pins.
+
+The register's reset value is 0x3717, corresponding to PC Beep on 1Ah that is
+then amplified and mixed into both the headphones and the speakers. Not only
+does this violate the HDA specification, which says that "[a vendor defined
+beep input pin] connection may be maintained *only* while the Link reset
+(**RST#**) is asserted", it means that we cannot ignore the register if we care
+about the input that 1Ah would otherwise expose or if the PCBEEP trace is
+poorly shielded and picks up chassis noise (both of which are the case on my
+machine).
+
+Unfortunately, there are lots of ways to get this register configuration wrong.
+Linux, it seems, has gone through most of them. For one, the register resets
+after S3 suspend: judging by existing code, this isn't the case for all vendor
+registers, and it's led to some fixes that improve behavior on cold boot but
+don't last after suspend. Other fixes have successfully switched the 1Ah input
+away from PC Beep but have failed to disable both loopback paths. On my
+machine, this means that the headphone input is amplified and looped back to
+the headphone output, which uses the exact same pins! As you might expect, this
+causes terrible headphone noise, the character of which is controlled by the
+1Ah boost control. (If you've seen instructions online to fix XPS 13 headphone
+noise by changing "Headphone Mic Boost" in ALSA, now you know why.)
+
+The information here has been obtained through black-box reverse engineering of
+the ALC256 codec's behavior and is not guaranteed to be correct. It likely
+also applies for the ALC255, ALC257, ALC235, and ALC236, since those codecs
+seem to be close relatives of the ALC256. (They all share one initialization
+function.) Additionally, other codecs like the ALC225 and ALC285 also have this
+register, judging by existing fixups in ``patch_realtek.c``, but specific
+data (e.g. node IDs, bit positions, pin mappings) for those codecs may differ
+from what I've described here.

[PATCH 4.19 056/146] ALSA: hda/realtek - Set principled PC Beep configuration for ALC256

[Greg Kroah-Hartman]

From: Thomas Hebb <tommyhebb@gmail.com>

commit c44737449468a0bdc50e09ec75e530f208391561 upstream.

The Realtek PC Beep Hidden Register[1] is currently set by
patch_realtek.c in two different places:

In alc_fill_eapd_coef(), it's set to the value 0x5757, corresponding to
non-beep input on 1Ah and no 1Ah loopback to either headphones or
speakers. (Although, curiously, the loopback amp is still enabled.) This
write was added fairly recently by commit e3743f431143 ("ALSA:
hda/realtek - Dell headphone has noise on unmute for ALC236") and is a
safe default. However, it happens in the wrong place:
alc_fill_eapd_coef() runs on module load and cold boot but not on S3
resume, meaning the register loses its value after suspend.

Conversely, in alc256_init(), the register is updated to unset bit 13
(disable speaker loopback) and set bit 5 (set non-beep input on 1Ah).
Although this write does run on S3 resume, it's not quite enough to fix
up the register's default value of 0x3717. What's missing is a set of
bit 14 to disable headphone loopback. Without that, we end up with a
feedback loop where the headphone jack is being driven by amplified
samples of itself[2].

This change eliminates the update in alc256_init() and replaces it with
the 0x5757 write from alc_fill_eapd_coef(). Kailang says that 0x5757 is
supposed to be the codec's default value, so using it will make
debugging easier for Realtek.

Affects the ALC255, ALC256, ALC257, ALC235, and ALC236 codecs.

[1] Newly documented in Documentation/sound/hd-audio/realtek-pc-beep.rst

[2] Setting the "Headphone Mic Boost" control from userspace changes
this feedback loop and has been a widely-shared workaround for headphone
noise on laptops like the Dell XPS 13 9350. This commit eliminates the
feedback loop and makes the workaround unnecessary.

Fixes: e1e8c1fdce8b ("ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/bf22b417d1f2474b12011c2a39ed6cf8b06d3bf5.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -379,7 +379,9 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0215:
 	case 0x10ec0233:
 	case 0x10ec0235:
+	case 0x10ec0236:
 	case 0x10ec0255:
+	case 0x10ec0256:
 	case 0x10ec0257:
 	case 0x10ec0282:
 	case 0x10ec0283:
@@ -391,11 +393,6 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0300:
 		alc_update_coef_idx(codec, 0x10, 1<<9, 0);
 		break;
-	case 0x10ec0236:
-	case 0x10ec0256:
-		alc_write_coef_idx(codec, 0x36, 0x5757);
-		alc_update_coef_idx(codec, 0x10, 1<<9, 0);
-		break;
 	case 0x10ec0275:
 		alc_update_coef_idx(codec, 0xe, 0, 1<<0);
 		break;
@@ -3249,7 +3246,13 @@ static void alc256_init(struct hda_codec
 	alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x4); /* Hight power */
 	alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 1 << 15); /* Clear bit */
 	alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 0 << 15);
-	alc_update_coef_idx(codec, 0x36, 1 << 13, 1 << 5); /* Switch pcbeep path to Line in path*/
+	/*
+	 * Expose headphone mic (or possibly Line In on some machines) instead
+	 * of PC Beep on 1Ah, and disable 1Ah loopback for all outputs. See
+	 * Documentation/sound/hd-audio/realtek-pc-beep.rst for details of
+	 * this register.
+	 */
+	alc_write_coef_idx(codec, 0x36, 0x5757);
 }
 
 static void alc256_shutup(struct hda_codec *codec)

[PATCH 4.19 057/146] ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups

[Greg Kroah-Hartman]

From: Thomas Hebb <tommyhebb@gmail.com>

commit f36938aa7440f46a0a365f1cfde5f5985af2bef3 upstream.

patch_realtek.c has historically failed to properly configure the PC
Beep Hidden Register for the ALC256 codec (among others). Depending on
your kernel version, symptoms of this misconfiguration can range from
chassis noise, picked up by a poorly-shielded PCBEEP trace, getting
amplified and played on your internal speaker and/or headphones to loud
feedback, which responds to the "Headphone Mic Boost" ALSA control,
getting played through your headphones. For details of the problem, see
the patch in this series titled "ALSA: hda/realtek - Set principled PC
Beep configuration for ALC256", which fixes the configuration.

These symptoms have been most noticed on the Dell XPS 13 9350 and 9360,
popular laptops that use the ALC256. As a result, several model-specific
fixups have been introduced to try and fix the problem, the most
egregious of which locks the "Headphone Mic Boost" control as a hack to
minimize noise from a feedback loop that shouldn't have been there in
the first place.

Now that the underlying issue has been fixed, remove all these fixups.
Remaining fixups needed by the XPS 13 are all picked up by existing pin
quirks.

This change should, for the XPS 13 9350/9360

 - Significantly increase volume and audio quality on headphones
 - Eliminate headphone popping on suspend/resume
 - Allow "Headphone Mic Boost" to be set again, making the headphone
   jack fully usable as a microphone jack too.

Fixes: 8c69729b4439 ("ALSA: hda - Fix headphone noise after Dell XPS 13 resume back from S3")
Fixes: 423cd785619a ("ALSA: hda - Fix headphone noise on Dell XPS 13 9360")
Fixes: e4c9fd10eb21 ("ALSA: hda - Apply headphone noise quirk for another Dell XPS 13 variant")
Fixes: 1099f48457d0 ("ALSA: hda/realtek: Reduce the Headphone static noise on XPS 9350/9360")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/b649a00edfde150cf6eebbb4390e15e0c2deb39a.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/sound/hd-audio/models.rst |    2 -
 sound/pci/hda/patch_realtek.c           |   34 --------------------------------
 2 files changed, 36 deletions(-)

--- a/Documentation/sound/hd-audio/models.rst
+++ b/Documentation/sound/hd-audio/models.rst
@@ -216,8 +216,6 @@ alc298-dell-aio
     ALC298 fixups on Dell AIO machines
 alc275-dell-xps
     ALC275 fixups on Dell XPS models
-alc256-dell-xps13
-    ALC256 fixups on Dell XPS13
 lenovo-spk-noise
     Workaround for speaker noise on Lenovo machines
 lenovo-hotkey
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5272,17 +5272,6 @@ static void alc271_hp_gate_mic_jack(stru
 	}
 }
 
-static void alc256_fixup_dell_xps_13_headphone_noise2(struct hda_codec *codec,
-						      const struct hda_fixup *fix,
-						      int action)
-{
-	if (action != HDA_FIXUP_ACT_PRE_PROBE)
-		return;
-
-	snd_hda_codec_amp_stereo(codec, 0x1a, HDA_INPUT, 0, HDA_AMP_VOLMASK, 1);
-	snd_hda_override_wcaps(codec, 0x1a, get_wcaps(codec, 0x1a) & ~AC_WCAP_IN_AMP);
-}
-
 static void alc269_fixup_limit_int_mic_boost(struct hda_codec *codec,
 					     const struct hda_fixup *fix,
 					     int action)
@@ -5674,8 +5663,6 @@ enum {
 	ALC298_FIXUP_DELL1_MIC_NO_PRESENCE,
 	ALC298_FIXUP_DELL_AIO_MIC_NO_PRESENCE,
 	ALC275_FIXUP_DELL_XPS,
-	ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE,
-	ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE2,
 	ALC293_FIXUP_LENOVO_SPK_NOISE,
 	ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY,
 	ALC255_FIXUP_DELL_SPK_NOISE,
@@ -6387,23 +6374,6 @@ static const struct hda_fixup alc269_fix
 			{}
 		}
 	},
-	[ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE] = {
-		.type = HDA_FIXUP_VERBS,
-		.v.verbs = (const struct hda_verb[]) {
-			/* Disable pass-through path for FRONT 14h */
-			{0x20, AC_VERB_SET_COEF_INDEX, 0x36},
-			{0x20, AC_VERB_SET_PROC_COEF, 0x1737},
-			{}
-		},
-		.chained = true,
-		.chain_id = ALC255_FIXUP_DELL1_MIC_NO_PRESENCE
-	},
-	[ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE2] = {
-		.type = HDA_FIXUP_FUNC,
-		.v.func = alc256_fixup_dell_xps_13_headphone_noise2,
-		.chained = true,
-		.chain_id = ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE
-	},
 	[ALC293_FIXUP_LENOVO_SPK_NOISE] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc_fixup_disable_aamix,
@@ -6871,17 +6841,14 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1028, 0x06de, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
 	SND_PCI_QUIRK(0x1028, 0x06df, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
 	SND_PCI_QUIRK(0x1028, 0x06e0, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
-	SND_PCI_QUIRK(0x1028, 0x0704, "Dell XPS 13 9350", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE2),
 	SND_PCI_QUIRK(0x1028, 0x0706, "Dell Inspiron 7559", ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER),
 	SND_PCI_QUIRK(0x1028, 0x0725, "Dell Inspiron 3162", ALC255_FIXUP_DELL_SPK_NOISE),
 	SND_PCI_QUIRK(0x1028, 0x0738, "Dell Precision 5820", ALC269_FIXUP_NO_SHUTUP),
-	SND_PCI_QUIRK(0x1028, 0x075b, "Dell XPS 13 9360", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE2),
 	SND_PCI_QUIRK(0x1028, 0x075c, "Dell XPS 27 7760", ALC298_FIXUP_SPK_VOLUME),
 	SND_PCI_QUIRK(0x1028, 0x075d, "Dell AIO", ALC298_FIXUP_SPK_VOLUME),
 	SND_PCI_QUIRK(0x1028, 0x07b0, "Dell Precision 7520", ALC295_FIXUP_DISABLE_DAC3),
 	SND_PCI_QUIRK(0x1028, 0x0798, "Dell Inspiron 17 7000 Gaming", ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER),
 	SND_PCI_QUIRK(0x1028, 0x080c, "Dell WYSE", ALC225_FIXUP_DELL_WYSE_MIC_NO_PRESENCE),
-	SND_PCI_QUIRK(0x1028, 0x082a, "Dell XPS 13 9360", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE2),
 	SND_PCI_QUIRK(0x1028, 0x084b, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB),
 	SND_PCI_QUIRK(0x1028, 0x084e, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB),
 	SND_PCI_QUIRK(0x1028, 0x0871, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC),
@@ -7232,7 +7199,6 @@ static const struct hda_model_fixup alc2
 	{.id = ALC298_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "alc298-dell1"},
 	{.id = ALC298_FIXUP_DELL_AIO_MIC_NO_PRESENCE, .name = "alc298-dell-aio"},
 	{.id = ALC275_FIXUP_DELL_XPS, .name = "alc275-dell-xps"},
-	{.id = ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE, .name = "alc256-dell-xps13"},
 	{.id = ALC293_FIXUP_LENOVO_SPK_NOISE, .name = "lenovo-spk-noise"},
 	{.id = ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY, .name = "lenovo-hotkey"},
 	{.id = ALC255_FIXUP_DELL_SPK_NOISE, .name = "dell-spk-noise"},

[PATCH 4.19 058/146] ALSA: hda/realtek - Add quirk for MSI GL63

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 1d3aa4a5516d2e4933fe3cca11d3349ef63bc547 upstream.

MSI GL63 laptop requires the similar quirk like other MSI models,
ALC1220_FIXUP_CLEVO_P950.  The board BIOS doesn't provide a PCI SSID
for the device, hence we need to take the codec SSID (1462:1275)
instead.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207157
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408135645.21896-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2441,6 +2441,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1458, 0xa0b8, "Gigabyte AZ370-Gaming", ALC1220_FIXUP_GB_DUAL_CODECS),
 	SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1462, 0x1275, "MSI-GL63", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1276, "MSI-GL73", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x1293, "MSI-GP65", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD),

[PATCH 4.19 059/146] media: ti-vpe: cal: fix disable_irqs to only the intended target

[Greg Kroah-Hartman]

From: Benoit Parrot <bparrot@ti.com>

commit 1db56284b9da9056093681f28db48a09a243274b upstream.

disable_irqs() was mistakenly disabling all interrupts when called.
This cause all port stream to stop even if only stopping one of them.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/platform/ti-vpe/cal.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -541,16 +541,16 @@ static void enable_irqs(struct cal_ctx *
 
 static void disable_irqs(struct cal_ctx *ctx)
 {
+	u32 val;
+
 	/* Disable IRQ_WDMA_END 0/1 */
-	reg_write_field(ctx->dev,
-			CAL_HL_IRQENABLE_CLR(2),
-			CAL_HL_IRQ_CLEAR,
-			CAL_HL_IRQ_MASK(ctx->csi2_port));
+	val = 0;
+	set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(2), val);
 	/* Disable IRQ_WDMA_START 0/1 */
-	reg_write_field(ctx->dev,
-			CAL_HL_IRQENABLE_CLR(3),
-			CAL_HL_IRQ_CLEAR,
-			CAL_HL_IRQ_MASK(ctx->csi2_port));
+	val = 0;
+	set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(3), val);
 	/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
 	reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0);
 }

[PATCH 4.19 060/146] acpi/x86: ignore unspecified bit positions in the ACPI global lock field

[Greg Kroah-Hartman]

From: Jan Engelhardt <jengelh@inai.de>

commit ecb9c790999fd6c5af0f44783bd0217f0b89ec2b upstream.

The value in "new" is constructed from "old" such that all bits defined
as reserved by the ACPI spec[1] are left untouched. But if those bits
do not happen to be all zero, "new < 3" will not evaluate to true.

The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with
garbage inside the "FACS" ACPI table. The starting value is
old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off
the reserved bits.

[1] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/acpi/boot.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1752,7 +1752,7 @@ int __acpi_acquire_global_lock(unsigned
 		new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
 		val = cmpxchg(lock, old, new);
 	} while (unlikely (val != old));
-	return (new < 3) ? -1 : 0;
+	return ((new & 0x3) < 3) ? -1 : 0;
 }
 
 int __acpi_release_global_lock(unsigned int *lock)

[PATCH 4.19 061/146] thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n

[Greg Kroah-Hartman]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

commit 3f5b9959041e0db6dacbea80bb833bff5900999f upstream.

When CONFIG_DEVFREQ_THERMAL is disabled all functions except
of_devfreq_cooling_register_power() were already inlined. Also inline
the last function to avoid compile errors when multiple drivers call
of_devfreq_cooling_register_power() when CONFIG_DEVFREQ_THERMAL is not
set. Compilation failed with the following message:
  multiple definition of `of_devfreq_cooling_register_power'
(which then lists all usages of of_devfreq_cooling_register_power())

Thomas Zimmermann reported this problem [0] on a kernel config with
CONFIG_DRM_LIMA={m,y}, CONFIG_DRM_PANFROST={m,y} and
CONFIG_DEVFREQ_THERMAL=n after both, the lima and panfrost drivers
gained devfreq cooling support.

[0] https://www.spinics.net/lists/dri-devel/msg252825.html

Fixes: a76caf55e5b356 ("thermal: Add devfreq cooling")
Cc: stable@vger.kernel.org
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200403205133.1101808-1-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/devfreq_cooling.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/devfreq_cooling.h
+++ b/include/linux/devfreq_cooling.h
@@ -75,7 +75,7 @@ void devfreq_cooling_unregister(struct t
 
 #else /* !CONFIG_DEVFREQ_THERMAL */
 
-struct thermal_cooling_device *
+static inline struct thermal_cooling_device *
 of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
 				  struct devfreq_cooling_power *dfc_power)
 {

[PATCH 4.19 062/146] nvme-fc: Revert "add module to ops template to allow module references"

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

commit 8c5c660529209a0e324c1c1a35ce3f83d67a2aa5 upstream.

The original patch was to resolve the lldd being able to be unloaded
while being used to talk to the boot device of the system. However, the
end result of the original patch is that any driver unload while a nvme
controller is live via the lldd is now being prohibited. Given the module
reference, the module teardown routine can't be called, thus there's no
way, other than manual actions to terminate the controllers.

Fixes: 863fbae929c7 ("nvme_fc: add module to ops template to allow module references")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvme/host/fc.c          |   14 ++------------
 drivers/nvme/target/fcloop.c    |    1 -
 drivers/scsi/lpfc/lpfc_nvme.c   |    2 --
 drivers/scsi/qla2xxx/qla_nvme.c |    1 -
 include/linux/nvme-fc-driver.h  |    4 ----
 5 files changed, 2 insertions(+), 20 deletions(-)

--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -342,8 +342,7 @@ nvme_fc_register_localport(struct nvme_f
 	    !template->ls_req || !template->fcp_io ||
 	    !template->ls_abort || !template->fcp_abort ||
 	    !template->max_hw_queues || !template->max_sgl_segments ||
-	    !template->max_dif_sgl_segments || !template->dma_boundary ||
-	    !template->module) {
+	    !template->max_dif_sgl_segments || !template->dma_boundary) {
 		ret = -EINVAL;
 		goto out_reghost_failed;
 	}
@@ -1987,7 +1986,6 @@ nvme_fc_ctrl_free(struct kref *ref)
 {
 	struct nvme_fc_ctrl *ctrl =
 		container_of(ref, struct nvme_fc_ctrl, ref);
-	struct nvme_fc_lport *lport = ctrl->lport;
 	unsigned long flags;
 
 	if (ctrl->ctrl.tagset) {
@@ -2013,7 +2011,6 @@ nvme_fc_ctrl_free(struct kref *ref)
 	if (ctrl->ctrl.opts)
 		nvmf_free_options(ctrl->ctrl.opts);
 	kfree(ctrl);
-	module_put(lport->ops->module);
 }
 
 static void
@@ -3055,15 +3052,10 @@ nvme_fc_init_ctrl(struct device *dev, st
 		goto out_fail;
 	}
 
-	if (!try_module_get(lport->ops->module)) {
-		ret = -EUNATCH;
-		goto out_free_ctrl;
-	}
-
 	idx = ida_simple_get(&nvme_fc_ctrl_cnt, 0, 0, GFP_KERNEL);
 	if (idx < 0) {
 		ret = -ENOSPC;
-		goto out_mod_put;
+		goto out_free_ctrl;
 	}
 
 	ctrl->ctrl.opts = opts;
@@ -3205,8 +3197,6 @@ out_free_queues:
 out_free_ida:
 	put_device(ctrl->dev);
 	ida_simple_remove(&nvme_fc_ctrl_cnt, ctrl->cnum);
-out_mod_put:
-	module_put(lport->ops->module);
 out_free_ctrl:
 	kfree(ctrl);
 out_fail:
--- a/drivers/nvme/target/fcloop.c
+++ b/drivers/nvme/target/fcloop.c
@@ -825,7 +825,6 @@ fcloop_targetport_delete(struct nvmet_fc
 #define FCLOOP_DMABOUND_4G		0xFFFFFFFF
 
 static struct nvme_fc_port_template fctemplate = {
-	.module			= THIS_MODULE,
 	.localport_delete	= fcloop_localport_delete,
 	.remoteport_delete	= fcloop_remoteport_delete,
 	.create_queue		= fcloop_create_queue,
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -1903,8 +1903,6 @@ lpfc_nvme_fcp_abort(struct nvme_fc_local
 
 /* Declare and initialization an instance of the FC NVME template. */
 static struct nvme_fc_port_template lpfc_nvme_template = {
-	.module	= THIS_MODULE,
-
 	/* initiator-based functions */
 	.localport_delete  = lpfc_nvme_localport_delete,
 	.remoteport_delete = lpfc_nvme_remoteport_delete,
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -560,7 +560,6 @@ static void qla_nvme_remoteport_delete(s
 }
 
 static struct nvme_fc_port_template qla_nvme_fc_transport = {
-	.module	= THIS_MODULE,
 	.localport_delete = qla_nvme_localport_delete,
 	.remoteport_delete = qla_nvme_remoteport_delete,
 	.create_queue   = qla_nvme_alloc_queue,
--- a/include/linux/nvme-fc-driver.h
+++ b/include/linux/nvme-fc-driver.h
@@ -282,8 +282,6 @@ struct nvme_fc_remote_port {
  *
  * Host/Initiator Transport Entrypoints/Parameters:
  *
- * @module:  The LLDD module using the interface
- *
  * @localport_delete:  The LLDD initiates deletion of a localport via
  *       nvme_fc_deregister_localport(). However, the teardown is
  *       asynchronous. This routine is called upon the completion of the
@@ -397,8 +395,6 @@ struct nvme_fc_remote_port {
  *       Value is Mandatory. Allowed to be zero.
  */
 struct nvme_fc_port_template {
-	struct module	*module;
-
 	/* initiator-based functions */
 	void	(*localport_delete)(struct nvme_fc_local_port *);
 	void	(*remoteport_delete)(struct nvme_fc_remote_port *);

[PATCH 4.19 063/146] nvme: Treat discovery subsystems as unique subsystems

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

commit c26aa572027d438de9cc311aaebcbe972f698c24 upstream.

Current code matches subnqn and collapses all controllers to the
same subnqn to a single subsystem structure. This is good for
recognizing multiple controllers for the same subsystem. But with
the well-known discovery subnqn, the subsystems aren't truly the
same subsystem. As such, subsystem specific rules, such as no
overlap of controller id, do not apply. With today's behavior, the
check for overlap of controller id can fail, preventing the new
discovery controller from being created.

When searching for like subsystem nqn, exclude the discovery nqn
from matching. This will result in each discovery controller being
attached to a unique subsystem structure.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvme/host/core.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2200,6 +2200,17 @@ static struct nvme_subsystem *__nvme_fin
 
 	lockdep_assert_held(&nvme_subsystems_lock);
 
+	/*
+	 * Fail matches for discovery subsystems. This results
+	 * in each discovery controller bound to a unique subsystem.
+	 * This avoids issues with validating controller values
+	 * that can only be true when there is a single unique subsystem.
+	 * There may be multiple and completely independent entities
+	 * that provide discovery controllers.
+	 */
+	if (!strcmp(subsysnqn, NVME_DISC_SUBSYS_NAME))
+		return NULL;
+
 	list_for_each_entry(subsys, &nvme_subsystems, entry) {
 		if (strcmp(subsys->subnqn, subsysnqn))
 			continue;

[PATCH 4.19 064/146] PCI: pciehp: Fix indefinite wait on sysfs requests

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit 3e487d2e4aa466decd226353755c9d423e8fbacc upstream.

David Hoyer reports that powering pciehp slots up or down via sysfs may
hang:  The call to wait_event() in pciehp_sysfs_enable_slot() and
_disable_slot() does not return because ctrl->ist_running remains true.

This flag, which was introduced by commit 157c1062fcd8 ("PCI: pciehp: Avoid
returning prematurely from sysfs requests"), signifies that the IRQ thread
pciehp_ist() is running.  It is set to true at the top of pciehp_ist() and
reset to false at the end.  However there are two additional return
statements in pciehp_ist() before which the commit neglected to reset the
flag to false and wake up waiters for the flag.

That omission opens up the following race when powering up the slot:

* pciehp_ist() runs because a PCI_EXP_SLTSTA_PDC event was requested
  by pciehp_sysfs_enable_slot()

* pciehp_ist() turns on slot power via the following call stack:
  pciehp_handle_presence_or_link_change() -> pciehp_enable_slot() ->
  __pciehp_enable_slot() -> board_added() -> pciehp_power_on_slot()

* after slot power is turned on, the link comes up, resulting in a
  PCI_EXP_SLTSTA_DLLSC event

* the IRQ handler pciehp_isr() stores the event in ctrl->pending_events
  and returns IRQ_WAKE_THREAD

* the IRQ thread is already woken (it's bringing up the slot), but the
  genirq code remembers to re-run the IRQ thread after it has finished
  (such that it can deal with the new event) by setting IRQTF_RUNTHREAD
  via __handle_irq_event_percpu() -> __irq_wake_thread()

* the IRQ thread removes PCI_EXP_SLTSTA_DLLSC from ctrl->pending_events
  via board_added() -> pciehp_check_link_status() in order to deal with
  presence and link flaps per commit 6c35a1ac3da6 ("PCI: pciehp:
  Tolerate initially unstable link")

* after pciehp_ist() has successfully brought up the slot, it resets
  ctrl->ist_running to false and wakes up the sysfs requester

* the genirq code re-runs pciehp_ist(), which sets ctrl->ist_running
  to true but then returns with IRQ_NONE because ctrl->pending_events
  is empty

* pciehp_sysfs_enable_slot() is finally woken but notices that
  ctrl->ist_running is true, hence continues waiting

The only way to get the hung task going again is to trigger a hotplug
event which brings down the slot, e.g. by yanking out the card.

The same race exists when powering down the slot because remove_board()
likewise clears link or presence changes in ctrl->pending_events per commit
3943af9d01e9 ("PCI: pciehp: Ignore Link State Changes after powering off a
slot") and thereby may cause a re-run of pciehp_ist() which returns with
IRQ_NONE without resetting ctrl->ist_running to false.

Fix by adding a goto label before the teardown steps at the end of
pciehp_ist() and jumping to that label from the two return statements which
currently neglect to reset the ctrl->ist_running flag.

Fixes: 157c1062fcd8 ("PCI: pciehp: Avoid returning prematurely from sysfs requests")
Link: https://lore.kernel.org/r/cca1effa488065cb055120aa01b65719094bdcb5.1584530321.git.lukas@wunner.de
Reported-by: David Hoyer <David.Hoyer@netapp.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Cc: stable@vger.kernel.org	# v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/hotplug/pciehp_hpc.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -627,17 +627,15 @@ static irqreturn_t pciehp_ist(int irq, v
 	if (atomic_fetch_and(~RERUN_ISR, &ctrl->pending_events) & RERUN_ISR) {
 		ret = pciehp_isr(irq, dev_id);
 		enable_irq(irq);
-		if (ret != IRQ_WAKE_THREAD) {
-			pci_config_pm_runtime_put(pdev);
-			return ret;
-		}
+		if (ret != IRQ_WAKE_THREAD)
+			goto out;
 	}
 
 	synchronize_hardirq(irq);
 	events = atomic_xchg(&ctrl->pending_events, 0);
 	if (!events) {
-		pci_config_pm_runtime_put(pdev);
-		return IRQ_NONE;
+		ret = IRQ_NONE;
+		goto out;
 	}
 
 	/* Check Attention Button Pressed */
@@ -666,10 +664,12 @@ static irqreturn_t pciehp_ist(int irq, v
 		pciehp_handle_presence_or_link_change(slot, events);
 	up_read(&ctrl->reset_lock);
 
+	ret = IRQ_HANDLED;
+out:
 	pci_config_pm_runtime_put(pdev);
 	ctrl->ist_running = false;
 	wake_up(&ctrl->requester);
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static int pciehp_poll(void *data)

[PATCH 4.19 065/146] PCI/ASPM: Clear the correct bits when enabling L1 substates

[Greg Kroah-Hartman]

From: Yicong Yang <yangyicong@hisilicon.com>

commit 58a3862a10a317a81097ab0c78aecebabb1704f5 upstream.

In pcie_config_aspm_l1ss(), we cleared the wrong bits when enabling ASPM L1
Substates.  Instead of the L1.x enable bits (PCI_L1SS_CTL1_L1SS_MASK, 0xf), we
cleared the Link Activation Interrupt Enable bit (PCI_L1SS_CAP_L1_PM_SS,
0x10).

Clear the L1.x enable bits before writing the new L1.x configuration.

[bhelgaas: changelog]
Fixes: aeda9adebab8 ("PCI/ASPM: Configure L1 substate settings")
Link: https://lore.kernel.org/r/1584093227-1292-1-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v4.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pcie/aspm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -747,9 +747,9 @@ static void pcie_config_aspm_l1ss(struct
 
 	/* Enable what we need to enable */
 	pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
-				PCI_L1SS_CAP_L1_PM_SS, val);
+				PCI_L1SS_CTL1_L1SS_MASK, val);
 	pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
-				PCI_L1SS_CAP_L1_PM_SS, val);
+				PCI_L1SS_CTL1_L1SS_MASK, val);
 }
 
 static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)

[PATCH 4.19 066/146] PCI: Add boot interrupt quirk mechanism for Xeon chipsets

[Greg Kroah-Hartman]

From: Sean V Kelley <sean.v.kelley@linux.intel.com>

commit b88bf6c3b6ff77948c153cac4e564642b0b90632 upstream.

The following was observed by Kar Hin Ong with RT patchset:

  Backtrace:
  irq 19: nobody cared (try booting with the "irqpoll" option)
  CPU: 0 PID: 3329 Comm: irq/34-nipalk Tainted:4.14.87-rt49 #1
  Hardware name: National Instruments NI PXIe-8880/NI PXIe-8880,
           BIOS 2.1.5f1 01/09/2020
  Call Trace:
  <IRQ>
    ? dump_stack+0x46/0x5e
    ? __report_bad_irq+0x2e/0xb0
    ? note_interrupt+0x242/0x290
    ? nNIKAL100_memoryRead16+0x8/0x10 [nikal]
    ? handle_irq_event_percpu+0x55/0x70
    ? handle_irq_event+0x4f/0x80
    ? handle_fasteoi_irq+0x81/0x180
    ? handle_irq+0x1c/0x30
    ? do_IRQ+0x41/0xd0
    ? common_interrupt+0x84/0x84
  </IRQ>
  ...
  handlers:
  [<ffffffffb3297200>] irq_default_primary_handler threaded
  [<ffffffffb3669180>] usb_hcd_irq
  Disabling IRQ #19

The problem being that this device is triggering boot interrupts
due to threaded interrupt handling and masking of the IO-APIC. These
boot interrupts are then forwarded on to the legacy PCH's PIRQ lines
where there is no handler present for the device.

Whenever a PCI device fires interrupt (INTx) to Pin 20 of IOAPIC 2
(GSI 44), the kernel receives two interrupts:

   1. Interrupt from Pin 20 of IOAPIC 2  -> Expected
   2. Interrupt from Pin 19 of IOAPIC 1  -> UNEXPECTED

Quirks for disabling boot interrupts (preferred) or rerouting the
handler exist but do not address these Xeon chipsets' mechanism:
https://lore.kernel.org/lkml/12131949181903-git-send-email-sassmann@suse.de/

Add a new mechanism via PCI CFG for those chipsets supporting CIPINTRC
register's dis_intx_rout2ich bit.

Link: https://lore.kernel.org/r/20200220192930.64820-2-sean.v.kelley@linux.intel.com
Reported-by: Kar Hin Ong <kar.hin.ong@ni.com>
Tested-by: Kar Hin Ong <kar.hin.ong@ni.com>
Signed-off-by: Sean V Kelley <sean.v.kelley@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/quirks.c |   80 ++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 73 insertions(+), 7 deletions(-)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1947,26 +1947,92 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_I
 /*
  * IO-APIC1 on 6300ESB generates boot interrupts, see Intel order no
  * 300641-004US, section 5.7.3.
+ *
+ * Core IO on Xeon E5 1600/2600/4600, see Intel order no 326509-003.
+ * Core IO on Xeon E5 v2, see Intel order no 329188-003.
+ * Core IO on Xeon E7 v2, see Intel order no 329595-002.
+ * Core IO on Xeon E5 v3, see Intel order no 330784-003.
+ * Core IO on Xeon E7 v3, see Intel order no 332315-001US.
+ * Core IO on Xeon E5 v4, see Intel order no 333810-002US.
+ * Core IO on Xeon E7 v4, see Intel order no 332315-001US.
+ * Core IO on Xeon D-1500, see Intel order no 332051-001.
+ * Core IO on Xeon Scalable, see Intel order no 610950.
  */
-#define INTEL_6300_IOAPIC_ABAR		0x40
+#define INTEL_6300_IOAPIC_ABAR		0x40	/* Bus 0, Dev 29, Func 5 */
 #define INTEL_6300_DISABLE_BOOT_IRQ	(1<<14)
 
+#define INTEL_CIPINTRC_CFG_OFFSET	0x14C	/* Bus 0, Dev 5, Func 0 */
+#define INTEL_CIPINTRC_DIS_INTX_ICH	(1<<25)
+
 static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev)
 {
 	u16 pci_config_word;
+	u32 pci_config_dword;
 
 	if (noioapicquirk)
 		return;
 
-	pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word);
-	pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ;
-	pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word);
-
+	switch (dev->device) {
+	case PCI_DEVICE_ID_INTEL_ESB_10:
+		pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR,
+				     &pci_config_word);
+		pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ;
+		pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR,
+				      pci_config_word);
+		break;
+	case 0x3c28:	/* Xeon E5 1600/2600/4600	*/
+	case 0x0e28:	/* Xeon E5/E7 V2		*/
+	case 0x2f28:	/* Xeon E5/E7 V3,V4		*/
+	case 0x6f28:	/* Xeon D-1500			*/
+	case 0x2034:	/* Xeon Scalable Family		*/
+		pci_read_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET,
+				      &pci_config_dword);
+		pci_config_dword |= INTEL_CIPINTRC_DIS_INTX_ICH;
+		pci_write_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET,
+				       pci_config_dword);
+		break;
+	default:
+		return;
+	}
 	pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n",
 		 dev->vendor, dev->device);
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_ESB_10,	quirk_disable_intel_boot_interrupt);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,   PCI_DEVICE_ID_INTEL_ESB_10,	quirk_disable_intel_boot_interrupt);
+/*
+ * Device 29 Func 5 Device IDs of IO-APIC
+ * containing ABAR—APIC1 Alternate Base Address Register
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ESB_10,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ESB_10,
+		quirk_disable_intel_boot_interrupt);
+
+/*
+ * Device 5 Func 0 Device IDs of Core IO modules/hubs
+ * containing Coherent Interface Protocol Interrupt Control
+ *
+ * Device IDs obtained from volume 2 datasheets of commented
+ * families above.
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x3c28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x0e28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2f28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x6f28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	0x2034,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	0x3c28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	0x0e28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	0x2f28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	0x6f28,
+		quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL,	0x2034,
+		quirk_disable_intel_boot_interrupt);
 
 /* Disable boot interrupts on HT-1000 */
 #define BC_HT1000_FEATURE_REG		0x64

[PATCH 4.19 067/146] PCI: endpoint: Fix for concurrent memory allocation in OB address region

[Greg Kroah-Hartman]

From: Kishon Vijay Abraham I <kishon@ti.com>

commit 04e046ca57ebed3943422dee10eec9e73aec081e upstream.

pci-epc-mem uses a bitmap to manage the Endpoint outbound (OB) address
region. This address region will be shared by multiple endpoint
functions (in the case of multi function endpoint) and it has to be
protected from concurrent access to avoid updating an inconsistent state.

Use a mutex to protect bitmap updates to prevent the memory
allocation API from returning incorrect addresses.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/endpoint/pci-epc-mem.c |   10 ++++++++--
 include/linux/pci-epc.h            |    3 +++
 2 files changed, 11 insertions(+), 2 deletions(-)

--- a/drivers/pci/endpoint/pci-epc-mem.c
+++ b/drivers/pci/endpoint/pci-epc-mem.c
@@ -79,6 +79,7 @@ int __pci_epc_mem_init(struct pci_epc *e
 	mem->page_size = page_size;
 	mem->pages = pages;
 	mem->size = size;
+	mutex_init(&mem->lock);
 
 	epc->mem = mem;
 
@@ -122,7 +123,7 @@ void __iomem *pci_epc_mem_alloc_addr(str
 				     phys_addr_t *phys_addr, size_t size)
 {
 	int pageno;
-	void __iomem *virt_addr;
+	void __iomem *virt_addr = NULL;
 	struct pci_epc_mem *mem = epc->mem;
 	unsigned int page_shift = ilog2(mem->page_size);
 	int order;
@@ -130,15 +131,18 @@ void __iomem *pci_epc_mem_alloc_addr(str
 	size = ALIGN(size, mem->page_size);
 	order = pci_epc_mem_get_order(mem, size);
 
+	mutex_lock(&mem->lock);
 	pageno = bitmap_find_free_region(mem->bitmap, mem->pages, order);
 	if (pageno < 0)
-		return NULL;
+		goto ret;
 
 	*phys_addr = mem->phys_base + (pageno << page_shift);
 	virt_addr = ioremap(*phys_addr, size);
 	if (!virt_addr)
 		bitmap_release_region(mem->bitmap, pageno, order);
 
+ret:
+	mutex_unlock(&mem->lock);
 	return virt_addr;
 }
 EXPORT_SYMBOL_GPL(pci_epc_mem_alloc_addr);
@@ -164,7 +168,9 @@ void pci_epc_mem_free_addr(struct pci_ep
 	pageno = (phys_addr - mem->phys_base) >> page_shift;
 	size = ALIGN(size, mem->page_size);
 	order = pci_epc_mem_get_order(mem, size);
+	mutex_lock(&mem->lock);
 	bitmap_release_region(mem->bitmap, pageno, order);
+	mutex_unlock(&mem->lock);
 }
 EXPORT_SYMBOL_GPL(pci_epc_mem_free_addr);
 
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -69,6 +69,7 @@ struct pci_epc_ops {
  * @bitmap: bitmap to manage the PCI address space
  * @pages: number of bits representing the address region
  * @page_size: size of each page
+ * @lock: mutex to protect bitmap
  */
 struct pci_epc_mem {
 	phys_addr_t	phys_base;
@@ -76,6 +77,8 @@ struct pci_epc_mem {
 	unsigned long	*bitmap;
 	size_t		page_size;
 	int		pages;
+	/* mutex to protect against concurrent access for memory allocation*/
+	struct mutex	lock;
 };
 
 /**

[PATCH 4.19 068/146] tpm: Dont make log failures fatal

[Greg Kroah-Hartman]

From: Matthew Garrett <matthewgarrett@google.com>

commit 805fa88e0780b7ce1cc9b649dd91a0a7164c6eb4 upstream.

If a TPM is in disabled state, it's reasonable for it to have an empty
log. Bailing out of probe in this case means that the PPI interface
isn't available, so there's no way to then enable the TPM from the OS.
In general it seems reasonable to ignore log errors - they shouldn't
interfere with any other TPM functionality.

Signed-off-by: Matthew Garrett <matthewgarrett@google.com>
Cc: stable@vger.kernel.org # 4.19.x
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/eventlog/common.c |   12 ++++--------
 drivers/char/tpm/tpm-chip.c        |    4 +---
 drivers/char/tpm/tpm.h             |    2 +-
 3 files changed, 6 insertions(+), 12 deletions(-)

--- a/drivers/char/tpm/eventlog/common.c
+++ b/drivers/char/tpm/eventlog/common.c
@@ -104,11 +104,8 @@ static int tpm_read_log(struct tpm_chip
  *
  * If an event log is found then the securityfs files are setup to
  * export it to userspace, otherwise nothing is done.
- *
- * Returns -ENODEV if the firmware has no event log or securityfs is not
- * supported.
  */
-int tpm_bios_log_setup(struct tpm_chip *chip)
+void tpm_bios_log_setup(struct tpm_chip *chip)
 {
 	const char *name = dev_name(&chip->dev);
 	unsigned int cnt;
@@ -117,7 +114,7 @@ int tpm_bios_log_setup(struct tpm_chip *
 
 	rc = tpm_read_log(chip);
 	if (rc < 0)
-		return rc;
+		return;
 	log_version = rc;
 
 	cnt = 0;
@@ -163,13 +160,12 @@ int tpm_bios_log_setup(struct tpm_chip *
 		cnt++;
 	}
 
-	return 0;
+	return;
 
 err:
-	rc = PTR_ERR(chip->bios_dir[cnt]);
 	chip->bios_dir[cnt] = NULL;
 	tpm_bios_log_teardown(chip);
-	return rc;
+	return;
 }
 
 void tpm_bios_log_teardown(struct tpm_chip *chip)
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -463,9 +463,7 @@ int tpm_chip_register(struct tpm_chip *c
 
 	tpm_sysfs_add_device(chip);
 
-	rc = tpm_bios_log_setup(chip);
-	if (rc != 0 && rc != -ENODEV)
-		return rc;
+	tpm_bios_log_setup(chip);
 
 	tpm_add_ppi(chip);
 
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -602,6 +602,6 @@ int tpm2_prepare_space(struct tpm_chip *
 int tpm2_commit_space(struct tpm_chip *chip, struct tpm_space *space,
 		      u32 cc, u8 *buf, size_t *bufsiz);
 
-int tpm_bios_log_setup(struct tpm_chip *chip);
+void tpm_bios_log_setup(struct tpm_chip *chip);
 void tpm_bios_log_teardown(struct tpm_chip *chip);
 #endif

[PATCH 4.19 069/146] tpm: tpm1_bios_measurements_next should increase position index

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

commit d7a47b96ed1102551eb7325f97937e276fb91045 upstream.

If .next function does not change position index,
following .show function will repeat output related
to current position index.

In case of /sys/kernel/security/tpm0/ascii_bios_measurements
and binary_bios_measurements:
1) read after lseek beyound end of file generates whole last line.
2) read after lseek to middle of last line generates
expected end of last line and unexpected whole last line once again.

Cc: stable@vger.kernel.org # 4.19.x
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/eventlog/tpm1.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/tpm/eventlog/tpm1.c
+++ b/drivers/char/tpm/eventlog/tpm1.c
@@ -129,6 +129,7 @@ static void *tpm1_bios_measurements_next
 	u32 converted_event_size;
 	u32 converted_event_type;
 
+	(*pos)++;
 	converted_event_size = do_endian_conversion(event->event_size);
 
 	v += sizeof(struct tcpa_event) + converted_event_size;
@@ -146,7 +147,6 @@ static void *tpm1_bios_measurements_next
 	    ((v + sizeof(struct tcpa_event) + converted_event_size) >= limit))
 		return NULL;
 
-	(*pos)++;
 	return v;
 }
 

[PATCH 4.19 070/146] tpm: tpm2_bios_measurements_next should increase position index

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

commit f9bf8adb55cd5a357b247a16aafddf8c97b276e0 upstream.

If .next function does not change position index,
following .show function will repeat output related
to current position index.

For /sys/kernel/security/tpm0/binary_bios_measurements:
1) read after lseek beyound end of file generates whole last line.
2) read after lseek to middle of last line generates
expected end of last line and unexpected whole last line once again.

Cc: stable@vger.kernel.org # 4.19.x
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/eventlog/tpm2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/tpm/eventlog/tpm2.c
+++ b/drivers/char/tpm/eventlog/tpm2.c
@@ -143,6 +143,7 @@ static void *tpm2_bios_measurements_next
 	size_t event_size;
 	void *marker;
 
+	(*pos)++;
 	event_header = log->bios_event_log;
 
 	if (v == SEQ_START_TOKEN) {
@@ -167,7 +168,6 @@ static void *tpm2_bios_measurements_next
 	if (((v + event_size) >= limit) || (event_size == 0))
 		return NULL;
 
-	(*pos)++;
 	return v;
 }
 

[PATCH 4.19 071/146] KEYS: reaching the keys quotas correctly

[Greg Kroah-Hartman]

From: Yang Xu <xuyang2018.jy@cn.fujitsu.com>

commit 2e356101e72ab1361821b3af024d64877d9a798d upstream.

Currently, when we add a new user key, the calltrace as below:

add_key()
  key_create_or_update()
    key_alloc()
    __key_instantiate_and_link
      generic_key_instantiate
        key_payload_reserve
          ......

Since commit a08bf91ce28e ("KEYS: allow reaching the keys quotas exactly"),
we can reach max bytes/keys in key_alloc, but we forget to remove this
limit when we reserver space for payload in key_payload_reserve. So we
can only reach max keys but not max bytes when having delta between plen
and type->def_datalen. Remove this limit when instantiating the key, so we
can keep consistent with key_alloc.

Also, fix the similar problem in keyctl_chown_key().

Fixes: 0b77f5bfb45c ("keys: make the keyring quotas controllable through /proc/sys")
Fixes: a08bf91ce28e ("KEYS: allow reaching the keys quotas exactly")
Cc: stable@vger.kernel.org # 5.0.x
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/keys/key.c    |    2 +-
 security/keys/keyctl.c |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/security/keys/key.c
+++ b/security/keys/key.c
@@ -383,7 +383,7 @@ int key_payload_reserve(struct key *key,
 		spin_lock(&key->user->lock);
 
 		if (delta > 0 &&
-		    (key->user->qnbytes + delta >= maxbytes ||
+		    (key->user->qnbytes + delta > maxbytes ||
 		     key->user->qnbytes + delta < key->user->qnbytes)) {
 			ret = -EDQUOT;
 		}
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -882,8 +882,8 @@ long keyctl_chown_key(key_serial_t id, u
 				key_quota_root_maxbytes : key_quota_maxbytes;
 
 			spin_lock(&newowner->lock);
-			if (newowner->qnkeys + 1 >= maxkeys ||
-			    newowner->qnbytes + key->quotalen >= maxbytes ||
+			if (newowner->qnkeys + 1 > maxkeys ||
+			    newowner->qnbytes + key->quotalen > maxbytes ||
 			    newowner->qnbytes + key->quotalen <
 			    newowner->qnbytes)
 				goto quota_overrun;

[PATCH 4.19 072/146] irqchip/versatile-fpga: Apply clear-mask earlier

[Greg Kroah-Hartman]

From: Sungbo Eo <mans0n@gorani.run>

commit 6a214a28132f19ace3d835a6d8f6422ec80ad200 upstream.

Clear its own IRQs before the parent IRQ get enabled, so that the
remaining IRQs do not accidentally interrupt the parent IRQ controller.

This patch also fixes a reboot bug on OX820 SoC, where the remaining
rps-timer IRQ raises a GIC interrupt that is left pending. After that,
the rps-timer IRQ is cleared during driver initialization, and there's
no IRQ left in rps-irq when local_irq_enable() is called, which evokes
an error message "unexpected IRQ trap".

Fixes: bdd272cbb97a ("irqchip: versatile FPGA: support cascaded interrupts from DT")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200321133842.2408823-1-mans0n@gorani.run
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/irqchip/irq-versatile-fpga.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/irqchip/irq-versatile-fpga.c
+++ b/drivers/irqchip/irq-versatile-fpga.c
@@ -212,6 +212,9 @@ int __init fpga_irq_of_init(struct devic
 	if (of_property_read_u32(node, "valid-mask", &valid_mask))
 		valid_mask = 0;
 
+	writel(clear_mask, base + IRQ_ENABLE_CLEAR);
+	writel(clear_mask, base + FIQ_ENABLE_CLEAR);
+
 	/* Some chips are cascaded from a parent IRQ */
 	parent_irq = irq_of_parse_and_map(node, 0);
 	if (!parent_irq) {
@@ -221,9 +224,6 @@ int __init fpga_irq_of_init(struct devic
 
 	fpga_irq_init(base, node->name, 0, parent_irq, valid_mask, node);
 
-	writel(clear_mask, base + IRQ_ENABLE_CLEAR);
-	writel(clear_mask, base + FIQ_ENABLE_CLEAR);
-
 	/*
 	 * On Versatile AB/PB, some secondary interrupts have a direct
 	 * pass-thru to the primary controller for IRQs 20 and 22-31 which need

[PATCH 4.19 073/146] pstore: pstore_ftrace_seq_next should increase position index

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

commit 6c871b7314dde9ab64f20de8f5aa3d01be4518e8 upstream.

In Aug 2018 NeilBrown noticed
commit 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface")
"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed.
A simple demonstration is

 dd if=/proc/swaps bs=1000 skip=1

Choose any block size larger than the size of /proc/swaps. This will
always show the whole last line of /proc/swaps"

/proc/swaps output was fixed recently, however there are lot of other
affected files, and one of them is related to pstore subsystem.

If .next function does not change position index, following .show function
will repeat output related to current position index.

There are at least 2 related problems:
- read after lseek beyond end of file, described above by NeilBrown
  "dd if=<AFFECTED_FILE> bs=1000 skip=1" will generate whole last list
- read after lseek on in middle of last line will output expected rest of
  last line but then repeat whole last line once again.

If .show() function generates multy-line output (like
pstore_ftrace_seq_show() does ?) following bash script cycles endlessly

 $ q=;while read -r r;do echo "$((++q)) $r";done < AFFECTED_FILE

Unfortunately I'm not familiar enough to pstore subsystem and was unable
to find affected pstore-related file on my test node.

If .next function does not change position index, following .show function
will repeat output related to current position index.

Cc: stable@vger.kernel.org
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: https://lore.kernel.org/r/4e49830d-4c88-0171-ee24-1ee540028dad@virtuozzo.com
[kees: with robustness tweak from Joel Fernandes <joelaf@google.com>]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pstore/inode.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/fs/pstore/inode.c
+++ b/fs/pstore/inode.c
@@ -99,11 +99,11 @@ static void *pstore_ftrace_seq_next(stru
 	struct pstore_private *ps = s->private;
 	struct pstore_ftrace_seq_data *data = v;
 
+	(*pos)++;
 	data->off += REC_SIZE;
 	if (data->off + REC_SIZE > ps->total_size)
 		return NULL;
 
-	(*pos)++;
 	return data;
 }
 
@@ -113,6 +113,9 @@ static int pstore_ftrace_seq_show(struct
 	struct pstore_ftrace_seq_data *data = v;
 	struct pstore_ftrace_record *rec;
 
+	if (!data)
+		return 0;
+
 	rec = (struct pstore_ftrace_record *)(ps->record->buf + data->off);
 
 	seq_printf(s, "CPU:%d ts:%llu %08lx  %08lx  %pf <- %pF\n",

[PATCH 4.19 074/146] MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3

[Greg Kroah-Hartman]

From: Huacai Chen <chenhc@lemote.com>

commit d191aaffe3687d1e73e644c185f5f0550ec242b5 upstream.

LDDIR/LDPTE is Loongson-3's acceleration for Page Table Walking. If BD
(Base Directory, the 4th page directory) is not enabled, then GDOffset
is biased by BadVAddr[63:62]. So, if GDOffset (aka. BadVAddr[47:36] for
Loongson-3) is big enough, "0b11(BadVAddr[63:62])|BadVAddr[47:36]|...."
can far beyond pg_swapper_dir. This means the pg_swapper_dir may NOT be
accessed by LDDIR correctly, so fix it by set PWDirExt in CP0_PWCtl.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pei Huang <huangpei@loongson.cn>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/tlbex.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1479,6 +1479,7 @@ static void build_r4000_tlb_refill_handl
 
 static void setup_pw(void)
 {
+	unsigned int pwctl;
 	unsigned long pgd_i, pgd_w;
 #ifndef __PAGETABLE_PMD_FOLDED
 	unsigned long pmd_i, pmd_w;
@@ -1505,6 +1506,7 @@ static void setup_pw(void)
 
 	pte_i = ilog2(_PAGE_GLOBAL);
 	pte_w = 0;
+	pwctl = 1 << 30; /* Set PWDirExt */
 
 #ifndef __PAGETABLE_PMD_FOLDED
 	write_c0_pwfield(pgd_i << 24 | pmd_i << 12 | pt_i << 6 | pte_i);
@@ -1515,8 +1517,9 @@ static void setup_pw(void)
 #endif
 
 #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-	write_c0_pwctl(1 << 6 | psn);
+	pwctl |= (1 << 6 | psn);
 #endif
+	write_c0_pwctl(pwctl);
 	write_c0_kpgd((long)swapper_pg_dir);
 	kscratch_used_mask |= (1 << 7); /* KScratch6 is used for KPGD */
 }

[PATCH 4.19 075/146] MIPS: OCTEON: irq: Fix potential NULL pointer dereference

[Greg Kroah-Hartman]

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 792a402c2840054533ef56279c212ef6da87d811 upstream.

There is a potential NULL pointer dereference in case kzalloc()
fails and returns NULL.

Fix this by adding a NULL check on *cd*

This bug was detected with the help of Coccinelle.

Fixes: 64b139f97c01 ("MIPS: OCTEON: irq: add CIB and other fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/cavium-octeon/octeon-irq.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -2199,6 +2199,9 @@ static int octeon_irq_cib_map(struct irq
 	}
 
 	cd = kzalloc(sizeof(*cd), GFP_KERNEL);
+	if (!cd)
+		return -ENOMEM;
+
 	cd->host_data = host_data;
 	cd->bit = hw;
 

[PATCH 4.19 076/146] ath9k: Handle txpower changes even when TPC is disabled

[Greg Kroah-Hartman]

From: Remi Pommarel <repk@triplefau.lt>

commit 968ae2caad0782db5dbbabb560d3cdefd2945d38 upstream.

When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to
reconfigure HW's maximum txpower.

This fixes 0dBm txpower setting when user attaches to an interface for
the first time with the following scenario:

ieee80211_do_open()
    ath9k_add_interface()
        ath9k_set_txpower() /* Set TX power with not yet initialized
                               sc->hw->conf.power_level */

    ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and
                             raise IEEE80211_CONF_CHANGE_POWER */

    ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */

This issue can be reproduced with the following:

  $ modprobe -r ath9k
  $ modprobe ath9k
  $ wpa_supplicant -i wlan0 -c /tmp/wpa.conf &
  $ iw dev /* Here TX power is either 0 or 3 depending on RF chain */
  $ killall wpa_supplicant
  $ iw dev /* TX power goes back to calibrated value and subsequent
              calls will be fine */

Fixes: 283dd11994cde ("ath9k: add per-vif TX power capability")
Cc: stable@vger.kernel.org
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/main.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1457,6 +1457,9 @@ static int ath9k_config(struct ieee80211
 		ath_chanctx_set_channel(sc, ctx, &hw->conf.chandef);
 	}
 
+	if (changed & IEEE80211_CONF_CHANGE_POWER)
+		ath9k_set_txpower(sc, NULL);
+
 	mutex_unlock(&sc->mutex);
 	ath9k_ps_restore(sc);
 

[PATCH 4.19 077/146] signal: Extend exec_id to 64bits

[Greg Kroah-Hartman]

From: Eric W. Biederman <ebiederm@xmission.com>

commit d1e7fd6462ca9fc76650fbe6ca800e35b24267da upstream.

Replace the 32bit exec_id with a 64bit exec_id to make it impossible
to wrap the exec_id counter.  With care an attacker can cause exec_id
wrap and send arbitrary signals to a newly exec'd parent.  This
bypasses the signal sending checks if the parent changes their
credentials during exec.

The severity of this problem can been seen that in my limited testing
of a 32bit exec_id it can take as little as 19s to exec 65536 times.
Which means that it can take as little as 14 days to wrap a 32bit
exec_id.  Adam Zabrocki has succeeded wrapping the self_exe_id in 7
days.  Even my slower timing is in the uptime of a typical server.
Which means self_exec_id is simply a speed bump today, and if exec
gets noticably faster self_exec_id won't even be a speed bump.

Extending self_exec_id to 64bits introduces a problem on 32bit
architectures where reading self_exec_id is no longer atomic and can
take two read instructions.  Which means that is is possible to hit
a window where the read value of exec_id does not match the written
value.  So with very lucky timing after this change this still
remains expoiltable.

I have updated the update of exec_id on exec to use WRITE_ONCE
and the read of exec_id in do_notify_parent to use READ_ONCE
to make it clear that there is no locking between these two
locations.

Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl
Fixes: 2.3.23pre2
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exec.c             |    2 +-
 include/linux/sched.h |    4 ++--
 kernel/signal.c       |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1378,7 +1378,7 @@ void setup_new_exec(struct linux_binprm
 
 	/* An exec changes our domain. We are no longer part of the thread
 	   group */
-	current->self_exec_id++;
+	WRITE_ONCE(current->self_exec_id, current->self_exec_id + 1);
 	flush_signal_handlers(current, 0);
 }
 EXPORT_SYMBOL(setup_new_exec);
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -887,8 +887,8 @@ struct task_struct {
 	struct seccomp			seccomp;
 
 	/* Thread group tracking: */
-	u32				parent_exec_id;
-	u32				self_exec_id;
+	u64				parent_exec_id;
+	u64				self_exec_id;
 
 	/* Protection against (de-)allocation: mm, files, fs, tty, keyrings, mems_allowed, mempolicy: */
 	spinlock_t			alloc_lock;
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1837,7 +1837,7 @@ bool do_notify_parent(struct task_struct
 		 * This is only possible if parent == real_parent.
 		 * Check if it has changed security domain.
 		 */
-		if (tsk->parent_exec_id != tsk->parent->self_exec_id)
+		if (tsk->parent_exec_id != READ_ONCE(tsk->parent->self_exec_id))
 			sig = SIGCHLD;
 	}
 

[PATCH 4.19 078/146] x86/entry/32: Add missing ASM_CLAC to general_protection entry

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

commit 3d51507f29f2153a658df4a0674ec5b592b62085 upstream.

All exception entry points must have ASM_CLAC right at the
beginning. The general_protection entry is missing one.

Fixes: e59d1b0a2419 ("x86-32, smap: Add STAC/CLAC instructions to 32-bit kernel entry")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200225220216.219537887@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/entry/entry_32.S |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1489,6 +1489,7 @@ ENTRY(int3)
 END(int3)
 
 ENTRY(general_protection)
+	ASM_CLAC
 	pushl	$do_general_protection
 	jmp	common_exception
 END(general_protection)

[PATCH 4.19 079/146] KVM: nVMX: Properly handle userspace interrupt window request

[Greg Kroah-Hartman]

From: Sean Christopherson <sean.j.christopherson@intel.com>

commit a1c77abb8d93381e25a8d2df3a917388244ba776 upstream.

Return true for vmx_interrupt_allowed() if the vCPU is in L2 and L1 has
external interrupt exiting enabled.  IRQs are never blocked in hardware
if the CPU is in the guest (L2 from L1's perspective) when IRQs trigger
VM-Exit.

The new check percolates up to kvm_vcpu_ready_for_interrupt_injection()
and thus vcpu_run(), and so KVM will exit to userspace if userspace has
requested an interrupt window (to inject an IRQ into L1).

Remove the @external_intr param from vmx_check_nested_events(), which is
actually an indicator that userspace wants an interrupt window, e.g.
it's named @req_int_win further up the stack.  Injecting a VM-Exit into
L1 to try and bounce out to L0 userspace is all kinds of broken and is
no longer necessary.

Remove the hack in nested_vmx_vmexit() that attempted to workaround the
breakage in vmx_check_nested_events() by only filling interrupt info if
there's an actual interrupt pending.  The hack actually made things
worse because it caused KVM to _never_ fill interrupt info when the
LAPIC resides in userspace (kvm_cpu_has_interrupt() queries
interrupt.injected, which is always cleared by prepare_vmcs12() before
reaching the hack in nested_vmx_vmexit()).

Fixes: 6550c4df7e50 ("KVM: nVMX: Fix interrupt window request with "Acknowledge interrupt on exit"")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/kvm_host.h |    2 +-
 arch/x86/kvm/vmx.c              |   27 +++++++++++----------------
 arch/x86/kvm/x86.c              |   10 +++++-----
 3 files changed, 17 insertions(+), 22 deletions(-)

--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1070,7 +1070,7 @@ struct kvm_x86_ops {
 	bool (*xsaves_supported)(void);
 	bool (*umip_emulated)(void);
 
-	int (*check_nested_events)(struct kvm_vcpu *vcpu, bool external_intr);
+	int (*check_nested_events)(struct kvm_vcpu *vcpu);
 	void (*request_immediate_exit)(struct kvm_vcpu *vcpu);
 
 	void (*sched_in)(struct kvm_vcpu *kvm, int cpu);
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6954,8 +6954,13 @@ static int vmx_nmi_allowed(struct kvm_vc
 
 static int vmx_interrupt_allowed(struct kvm_vcpu *vcpu)
 {
-	return (!to_vmx(vcpu)->nested.nested_run_pending &&
-		vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
+	if (to_vmx(vcpu)->nested.nested_run_pending)
+		return false;
+
+	if (is_guest_mode(vcpu) && nested_exit_on_intr(vcpu))
+		return true;
+
+	return (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
 		!(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
 			(GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS));
 }
@@ -12990,7 +12995,7 @@ static void vmcs12_save_pending_event(st
 	}
 }
 
-static int vmx_check_nested_events(struct kvm_vcpu *vcpu, bool external_intr)
+static int vmx_check_nested_events(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	unsigned long exit_qual;
@@ -13028,8 +13033,7 @@ static int vmx_check_nested_events(struc
 		return 0;
 	}
 
-	if ((kvm_cpu_has_interrupt(vcpu) || external_intr) &&
-	    nested_exit_on_intr(vcpu)) {
+	if (kvm_cpu_has_interrupt(vcpu) && nested_exit_on_intr(vcpu)) {
 		if (block_nested_events)
 			return -EBUSY;
 		nested_vmx_vmexit(vcpu, EXIT_REASON_EXTERNAL_INTERRUPT, 0, 0);
@@ -13607,17 +13611,8 @@ static void nested_vmx_vmexit(struct kvm
 	vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 
 	if (likely(!vmx->fail)) {
-		/*
-		 * TODO: SDM says that with acknowledge interrupt on
-		 * exit, bit 31 of the VM-exit interrupt information
-		 * (valid interrupt) is always set to 1 on
-		 * EXIT_REASON_EXTERNAL_INTERRUPT, so we shouldn't
-		 * need kvm_cpu_has_interrupt().  See the commit
-		 * message for details.
-		 */
-		if (nested_exit_intr_ack_set(vcpu) &&
-		    exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT &&
-		    kvm_cpu_has_interrupt(vcpu)) {
+		if (exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT &&
+		    nested_exit_intr_ack_set(vcpu)) {
 			int irq = kvm_cpu_get_interrupt(vcpu);
 			WARN_ON(irq < 0);
 			vmcs12->vm_exit_intr_info = irq |
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7124,7 +7124,7 @@ static void update_cr8_intercept(struct
 	kvm_x86_ops->update_cr8_intercept(vcpu, tpr, max_irr);
 }
 
-static int inject_pending_event(struct kvm_vcpu *vcpu, bool req_int_win)
+static int inject_pending_event(struct kvm_vcpu *vcpu)
 {
 	int r;
 
@@ -7160,7 +7160,7 @@ static int inject_pending_event(struct k
 	 * from L2 to L1.
 	 */
 	if (is_guest_mode(vcpu) && kvm_x86_ops->check_nested_events) {
-		r = kvm_x86_ops->check_nested_events(vcpu, req_int_win);
+		r = kvm_x86_ops->check_nested_events(vcpu);
 		if (r != 0)
 			return r;
 	}
@@ -7210,7 +7210,7 @@ static int inject_pending_event(struct k
 		 * KVM_REQ_EVENT only on certain events and not unconditionally?
 		 */
 		if (is_guest_mode(vcpu) && kvm_x86_ops->check_nested_events) {
-			r = kvm_x86_ops->check_nested_events(vcpu, req_int_win);
+			r = kvm_x86_ops->check_nested_events(vcpu);
 			if (r != 0)
 				return r;
 		}
@@ -7683,7 +7683,7 @@ static int vcpu_enter_guest(struct kvm_v
 			goto out;
 		}
 
-		if (inject_pending_event(vcpu, req_int_win) != 0)
+		if (inject_pending_event(vcpu) != 0)
 			req_immediate_exit = true;
 		else {
 			/* Enable SMI/NMI/IRQ window open exits if needed.
@@ -7894,7 +7894,7 @@ static inline int vcpu_block(struct kvm
 static inline bool kvm_vcpu_running(struct kvm_vcpu *vcpu)
 {
 	if (is_guest_mode(vcpu) && kvm_x86_ops->check_nested_events)
-		kvm_x86_ops->check_nested_events(vcpu, false);
+		kvm_x86_ops->check_nested_events(vcpu);
 
 	return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE &&
 		!vcpu->arch.apf.halted);

[PATCH 4.19 080/146] KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks

[Greg Kroah-Hartman]

From: David Hildenbrand <david@redhat.com>

commit a1d032a49522cb5368e5dfb945a85899b4c74f65 upstream.

In case we have a region 1 the following calculation
(31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11)
results in 64. As shifts beyond the size are undefined the compiler is
free to use instructions like sllg. sllg will only use 6 bits of the
shift value (here 64) resulting in no shift at all. That means that ALL
addresses will be rejected.

The can result in endless loops, e.g. when prefix cannot get mapped.

Fixes: 4be130a08420 ("s390/mm: add shadow gmap support")
Tested-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-2-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description, remove WARN_ON_ONCE]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/mm/gmap.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -787,14 +787,18 @@ static void gmap_call_notifier(struct gm
 static inline unsigned long *gmap_table_walk(struct gmap *gmap,
 					     unsigned long gaddr, int level)
 {
+	const int asce_type = gmap->asce & _ASCE_TYPE_MASK;
 	unsigned long *table;
 
 	if ((gmap->asce & _ASCE_TYPE_MASK) + 4 < (level * 4))
 		return NULL;
 	if (gmap_is_shadow(gmap) && gmap->removed)
 		return NULL;
-	if (gaddr & (-1UL << (31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11)))
+
+	if (asce_type != _ASCE_TYPE_REGION1 &&
+	    gaddr & (-1UL << (31 + (asce_type >> 2) * 11)))
 		return NULL;
+
 	table = gmap->table;
 	switch (gmap->asce & _ASCE_TYPE_MASK) {
 	case _ASCE_TYPE_REGION1:

[PATCH 4.19 081/146] KVM: s390: vsie: Fix delivery of addressing exceptions

[Greg Kroah-Hartman]

From: David Hildenbrand <david@redhat.com>

commit 4d4cee96fb7a3cc53702a9be8299bf525be4ee98 upstream.

Whenever we get an -EFAULT, we failed to read in guest 2 physical
address space. Such addressing exceptions are reported via a program
intercept to the nested hypervisor.

We faked the intercept, we have to return to guest 2. Instead, right
now we would be returning -EFAULT from the intercept handler, eventually
crashing the VM.
the correct thing to do is to return 1 as rc == 1 is the internal
representation of "we have to go back into g2".

Addressing exceptions can only happen if the g2->g3 page tables
reference invalid g2 addresses (say, either a table or the final page is
not accessible - so something that basically never happens in sane
environments.

Identified by manual code inspection.

Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kvm/vsie.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -1024,6 +1024,7 @@ static int vsie_run(struct kvm_vcpu *vcp
 		scb_s->iprcc = PGM_ADDRESSING;
 		scb_s->pgmilc = 4;
 		scb_s->gpsw.addr = __rewind_psw(scb_s->gpsw, 4);
+		rc = 1;
 	}
 	return rc;
 }

[PATCH 4.19 082/146] KVM: x86: Allocate new rmap and large page tracking when moving memslot

[Greg Kroah-Hartman]

From: Sean Christopherson <sean.j.christopherson@intel.com>

commit edd4fa37baa6ee8e44dc65523b27bd6fe44c94de upstream.

Reallocate a rmap array and recalcuate large page compatibility when
moving an existing memslot to correctly handle the alignment properties
of the new memslot.  The number of rmap entries required at each level
is dependent on the alignment of the memslot's base gfn with respect to
that level, e.g. moving a large-page aligned memslot so that it becomes
unaligned will increase the number of rmap entries needed at the now
unaligned level.

Not updating the rmap array is the most obvious bug, as KVM accesses
garbage data beyond the end of the rmap.  KVM interprets the bad data as
pointers, leading to non-canonical #GPs, unexpected #PFs, etc...

  general protection fault: 0000 [#1] SMP
  CPU: 0 PID: 1909 Comm: move_memory_reg Not tainted 5.4.0-rc7+ #139
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:rmap_get_first+0x37/0x50 [kvm]
  Code: <48> 8b 3b 48 85 ff 74 ec e8 6c f4 ff ff 85 c0 74 e3 48 89 d8 5b c3
  RSP: 0018:ffffc9000021bbc8 EFLAGS: 00010246
  RAX: ffff00617461642e RBX: ffff00617461642e RCX: 0000000000000012
  RDX: ffff88827400f568 RSI: ffffc9000021bbe0 RDI: ffff88827400f570
  RBP: 0010000000000000 R08: ffffc9000021bd00 R09: ffffc9000021bda8
  R10: ffffc9000021bc48 R11: 0000000000000000 R12: 0030000000000000
  R13: 0000000000000000 R14: ffff88827427d700 R15: ffffc9000021bce8
  FS:  00007f7eda014700(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f7ed9216ff8 CR3: 0000000274391003 CR4: 0000000000162eb0
  Call Trace:
   kvm_mmu_slot_set_dirty+0xa1/0x150 [kvm]
   __kvm_set_memory_region.part.64+0x559/0x960 [kvm]
   kvm_set_memory_region+0x45/0x60 [kvm]
   kvm_vm_ioctl+0x30f/0x920 [kvm]
   do_vfs_ioctl+0xa1/0x620
   ksys_ioctl+0x66/0x70
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4c/0x170
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f7ed9911f47
  Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffc00937498 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 0000000001ab0010 RCX: 00007f7ed9911f47
  RDX: 0000000001ab1350 RSI: 000000004020ae46 RDI: 0000000000000004
  RBP: 000000000000000a R08: 0000000000000000 R09: 00007f7ed9214700
  R10: 00007f7ed92149d0 R11: 0000000000000246 R12: 00000000bffff000
  R13: 0000000000000003 R14: 00007f7ed9215000 R15: 0000000000000000
  Modules linked in: kvm_intel kvm irqbypass
  ---[ end trace 0c5f570b3358ca89 ]---

The disallow_lpage tracking is more subtle.  Failure to update results
in KVM creating large pages when it shouldn't, either due to stale data
or again due to indexing beyond the end of the metadata arrays, which
can lead to memory corruption and/or leaking data to guest/userspace.

Note, the arrays for the old memslot are freed by the unconditional call
to kvm_free_memslot() in __kvm_set_memory_region().

Fixes: 05da45583de9b ("KVM: MMU: large page support")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9229,6 +9229,13 @@ int kvm_arch_create_memslot(struct kvm *
 {
 	int i;
 
+	/*
+	 * Clear out the previous array pointers for the KVM_MR_MOVE case.  The
+	 * old arrays will be freed by __kvm_set_memory_region() if installing
+	 * the new memslot is successful.
+	 */
+	memset(&slot->arch, 0, sizeof(slot->arch));
+
 	for (i = 0; i < KVM_NR_PAGE_SIZES; ++i) {
 		struct kvm_lpage_info *linfo;
 		unsigned long ugfn;
@@ -9303,6 +9310,10 @@ int kvm_arch_prepare_memory_region(struc
 				const struct kvm_userspace_memory_region *mem,
 				enum kvm_mr_change change)
 {
+	if (change == KVM_MR_MOVE)
+		return kvm_arch_create_memslot(kvm, memslot,
+					       mem->memory_size >> PAGE_SHIFT);
+
 	return 0;
 }
 

[PATCH 4.19 083/146] KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support

[Greg Kroah-Hartman]

From: Sean Christopherson <sean.j.christopherson@intel.com>

commit 31603d4fc2bb4f0815245d496cb970b27b4f636a upstream.

VMCLEAR all in-use VMCSes during a crash, even if kdump's NMI shootdown
interrupted a KVM update of the percpu in-use VMCS list.

Because NMIs are not blocked by disabling IRQs, it's possible that
crash_vmclear_local_loaded_vmcss() could be called while the percpu list
of VMCSes is being modified, e.g. in the middle of list_add() in
vmx_vcpu_load_vmcs().  This potential corner case was called out in the
original commit[*], but the analysis of its impact was wrong.

Skipping the VMCLEARs is wrong because it all but guarantees that a
loaded, and therefore cached, VMCS will live across kexec and corrupt
memory in the new kernel.  Corruption will occur because the CPU's VMCS
cache is non-coherent, i.e. not snooped, and so the writeback of VMCS
memory on its eviction will overwrite random memory in the new kernel.
The VMCS will live because the NMI shootdown also disables VMX, i.e. the
in-progress VMCLEAR will #UD, and existing Intel CPUs do not flush the
VMCS cache on VMXOFF.

Furthermore, interrupting list_add() and list_del() is safe due to
crash_vmclear_local_loaded_vmcss() using forward iteration.  list_add()
ensures the new entry is not visible to forward iteration unless the
entire add completes, via WRITE_ONCE(prev->next, new).  A bad "prev"
pointer could be observed if the NMI shootdown interrupted list_del() or
list_add(), but list_for_each_entry() does not consume ->prev.

In addition to removing the temporary disabling of VMCLEAR, open code
loaded_vmcs_init() in __loaded_vmcs_clear() and reorder VMCLEAR so that
the VMCS is deleted from the list only after it's been VMCLEAR'd.
Deleting the VMCS before VMCLEAR would allow a race where the NMI
shootdown could arrive between list_del() and vmcs_clear() and thus
neither flow would execute a successful VMCLEAR.  Alternatively, more
code could be moved into loaded_vmcs_init(), but that gets rather silly
as the only other user, alloc_loaded_vmcs(), doesn't need the smp_wmb()
and would need to work around the list_del().

Update the smp_*() comments related to the list manipulation, and
opportunistically reword them to improve clarity.

[*] https://patchwork.kernel.org/patch/1675731/#3720461

Fixes: 8f536b7697a0 ("KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/vmx.c |   67 ++++++++++++-----------------------------------------
 1 file changed, 16 insertions(+), 51 deletions(-)

--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2156,43 +2156,15 @@ static void vmcs_load(struct vmcs *vmcs)
 }
 
 #ifdef CONFIG_KEXEC_CORE
-/*
- * This bitmap is used to indicate whether the vmclear
- * operation is enabled on all cpus. All disabled by
- * default.
- */
-static cpumask_t crash_vmclear_enabled_bitmap = CPU_MASK_NONE;
-
-static inline void crash_enable_local_vmclear(int cpu)
-{
-	cpumask_set_cpu(cpu, &crash_vmclear_enabled_bitmap);
-}
-
-static inline void crash_disable_local_vmclear(int cpu)
-{
-	cpumask_clear_cpu(cpu, &crash_vmclear_enabled_bitmap);
-}
-
-static inline int crash_local_vmclear_enabled(int cpu)
-{
-	return cpumask_test_cpu(cpu, &crash_vmclear_enabled_bitmap);
-}
-
 static void crash_vmclear_local_loaded_vmcss(void)
 {
 	int cpu = raw_smp_processor_id();
 	struct loaded_vmcs *v;
 
-	if (!crash_local_vmclear_enabled(cpu))
-		return;
-
 	list_for_each_entry(v, &per_cpu(loaded_vmcss_on_cpu, cpu),
 			    loaded_vmcss_on_cpu_link)
 		vmcs_clear(v->vmcs);
 }
-#else
-static inline void crash_enable_local_vmclear(int cpu) { }
-static inline void crash_disable_local_vmclear(int cpu) { }
 #endif /* CONFIG_KEXEC_CORE */
 
 static void __loaded_vmcs_clear(void *arg)
@@ -2204,19 +2176,24 @@ static void __loaded_vmcs_clear(void *ar
 		return; /* vcpu migration can race with cpu offline */
 	if (per_cpu(current_vmcs, cpu) == loaded_vmcs->vmcs)
 		per_cpu(current_vmcs, cpu) = NULL;
-	crash_disable_local_vmclear(cpu);
+
+	vmcs_clear(loaded_vmcs->vmcs);
+	if (loaded_vmcs->shadow_vmcs && loaded_vmcs->launched)
+		vmcs_clear(loaded_vmcs->shadow_vmcs);
+
 	list_del(&loaded_vmcs->loaded_vmcss_on_cpu_link);
 
 	/*
-	 * we should ensure updating loaded_vmcs->loaded_vmcss_on_cpu_link
-	 * is before setting loaded_vmcs->vcpu to -1 which is done in
-	 * loaded_vmcs_init. Otherwise, other cpu can see vcpu = -1 fist
-	 * then adds the vmcs into percpu list before it is deleted.
+	 * Ensure all writes to loaded_vmcs, including deleting it from its
+	 * current percpu list, complete before setting loaded_vmcs->vcpu to
+	 * -1, otherwise a different cpu can see vcpu == -1 first and add
+	 * loaded_vmcs to its percpu list before it's deleted from this cpu's
+	 * list. Pairs with the smp_rmb() in vmx_vcpu_load_vmcs().
 	 */
 	smp_wmb();
 
-	loaded_vmcs_init(loaded_vmcs);
-	crash_enable_local_vmclear(cpu);
+	loaded_vmcs->cpu = -1;
+	loaded_vmcs->launched = 0;
 }
 
 static void loaded_vmcs_clear(struct loaded_vmcs *loaded_vmcs)
@@ -3067,18 +3044,17 @@ static void vmx_vcpu_load(struct kvm_vcp
 	if (!already_loaded) {
 		loaded_vmcs_clear(vmx->loaded_vmcs);
 		local_irq_disable();
-		crash_disable_local_vmclear(cpu);
 
 		/*
-		 * Read loaded_vmcs->cpu should be before fetching
-		 * loaded_vmcs->loaded_vmcss_on_cpu_link.
-		 * See the comments in __loaded_vmcs_clear().
+		 * Ensure loaded_vmcs->cpu is read before adding loaded_vmcs to
+		 * this cpu's percpu list, otherwise it may not yet be deleted
+		 * from its previous cpu's percpu list.  Pairs with the
+		 * smb_wmb() in __loaded_vmcs_clear().
 		 */
 		smp_rmb();
 
 		list_add(&vmx->loaded_vmcs->loaded_vmcss_on_cpu_link,
 			 &per_cpu(loaded_vmcss_on_cpu, cpu));
-		crash_enable_local_vmclear(cpu);
 		local_irq_enable();
 	}
 
@@ -4426,17 +4402,6 @@ static int hardware_enable(void)
 	INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu));
 	spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
 
-	/*
-	 * Now we can enable the vmclear operation in kdump
-	 * since the loaded_vmcss_on_cpu list on this cpu
-	 * has been initialized.
-	 *
-	 * Though the cpu is not in VMX operation now, there
-	 * is no problem to enable the vmclear operation
-	 * for the loaded_vmcss_on_cpu list is empty!
-	 */
-	crash_enable_local_vmclear(cpu);
-
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
 
 	test_bits = FEATURE_CONTROL_LOCKED;

[PATCH 4.19 084/146] KVM: x86: Gracefully handle __vmalloc() failure during VM allocation

[Greg Kroah-Hartman]

From: Sean Christopherson <sean.j.christopherson@intel.com>

commit d18b2f43b9147c8005ae0844fb445d8cc6a87e31 upstream.

Check the result of __vmalloc() to avoid dereferencing a NULL pointer in
the event that allocation failres.

Fixes: d1e5b0e98ea27 ("kvm: Make VM ioctl do valloc for some archs")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/svm.c |    4 ++++
 arch/x86/kvm/vmx.c |    4 ++++
 2 files changed, 8 insertions(+)

--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1917,6 +1917,10 @@ static void __unregister_enc_region_lock
 static struct kvm *svm_vm_alloc(void)
 {
 	struct kvm_svm *kvm_svm = vzalloc(sizeof(struct kvm_svm));
+
+	if (!kvm_svm)
+		return NULL;
+
 	return &kvm_svm->kvm;
 }
 
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -10986,6 +10986,10 @@ STACK_FRAME_NON_STANDARD(vmx_vcpu_run);
 static struct kvm *vmx_vm_alloc(void)
 {
 	struct kvm_vmx *kvm_vmx = vzalloc(sizeof(struct kvm_vmx));
+
+	if (!kvm_vmx)
+		return NULL;
+
 	return &kvm_vmx->kvm;
 }
 

[PATCH 4.19 085/146] KVM: VMX: fix crash cleanup when KVM wasnt used

[Greg Kroah-Hartman]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

commit dbef2808af6c594922fe32833b30f55f35e9da6d upstream.

If KVM wasn't used at all before we crash the cleanup procedure fails with
 BUG: unable to handle page fault for address: ffffffffffffffc8
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 23215067 P4D 23215067 PUD 23217067 PMD 0
 Oops: 0000 [#8] SMP PTI
 CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G      D           5.6.0-rc2+ #823
 RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel]

The root cause is that loaded_vmcss_on_cpu list is not yet initialized,
we initialize it in hardware_enable() but this only happens when we start
a VM.

Previously, we used to have a bitmap with enabled CPUs and that was
preventing [masking] the issue.

Initialized loaded_vmcss_on_cpu list earlier, right before we assign
crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and
blocked_vcpu_on_cpu_lock are moved altogether for consistency.

Fixes: 31603d4fc2bb ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200401081348.1345307-1-vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/vmx.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -4398,10 +4398,6 @@ static int hardware_enable(void)
 	    !hv_get_vp_assist_page(cpu))
 		return -EFAULT;
 
-	INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu));
-	INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu));
-	spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
-
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
 
 	test_bits = FEATURE_CONTROL_LOCKED;
@@ -14554,7 +14550,7 @@ module_exit(vmx_exit);
 
 static int __init vmx_init(void)
 {
-	int r;
+	int r, cpu;
 
 #if IS_ENABLED(CONFIG_HYPERV)
 	/*
@@ -14605,6 +14601,12 @@ static int __init vmx_init(void)
 		}
 	}
 
+	for_each_possible_cpu(cpu) {
+		INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu));
+		INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu));
+		spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
+	}
+
 #ifdef CONFIG_KEXEC_CORE
 	rcu_assign_pointer(crash_vmclear_loaded_vmcss,
 			   crash_vmclear_local_loaded_vmcss);

[PATCH 4.19 086/146] CIFS: Fix bug which the return value by asynchronous read is error

[Greg Kroah-Hartman]

From: Yilu Lin <linyilu@huawei.com>

commit 97adda8b3ab703de8e4c8d27646ddd54fe22879c upstream.

This patch is used to fix the bug in collect_uncached_read_data()
that rc is automatically converted from a signed number to an
unsigned number when the CIFS asynchronous read fails.
It will cause ctx->rc is error.

Example:
Share a directory and create a file on the Windows OS.
Mount the directory to the Linux OS using CIFS.
On the CIFS client of the Linux OS, invoke the pread interface to
deliver the read request.

The size of the read length plus offset of the read request is greater
than the maximum file size.

In this case, the CIFS server on the Windows OS returns a failure
message (for example, the return value of
smb2.nt_status is STATUS_INVALID_PARAMETER).

After receiving the response message, the CIFS client parses
smb2.nt_status to STATUS_INVALID_PARAMETER
and converts it to the Linux error code (rdata->result=-22).

Then the CIFS client invokes the collect_uncached_read_data function to
assign the value of rdata->result to rc, that is, rc=rdata->result=-22.

The type of the ctx->total_len variable is unsigned integer,
the type of the rc variable is integer, and the type of
the ctx->rc variable is ssize_t.

Therefore, during the ternary operation, the value of rc is
automatically converted to an unsigned number. The final result is
ctx->rc=4294967274. However, the expected result is ctx->rc=-22.

Signed-off-by: Yilu Lin <linyilu@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -3339,7 +3339,7 @@ again:
 	if (rc == -ENODATA)
 		rc = 0;
 
-	ctx->rc = (rc == 0) ? ctx->total_len : rc;
+	ctx->rc = (rc == 0) ? (ssize_t)ctx->total_len : rc;
 
 	mutex_unlock(&ctx->aio_mutex);
 

[PATCH 4.19 087/146] mtd: spinand: Stop using spinand->oobbuf for buffering bad block markers

[Greg Kroah-Hartman]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

commit 2148937501ee3d663e0010e519a553fea67ad103 upstream.

For reading and writing the bad block markers, spinand->oobbuf is
currently used as a buffer for the marker bytes. During the
underlying read and write operations to actually get/set the content
of the OOB area, the content of spinand->oobbuf is reused and changed
by accessing it through spinand->oobbuf and/or spinand->databuf.

This is a flaw in the original design of the SPI NAND core and at the
latest from 13c15e07eedf ("mtd: spinand: Handle the case where
PROGRAM LOAD does not reset the cache") on, it results in not having
the bad block marker written at all, as the spinand->oobbuf is
cleared to 0xff after setting the marker bytes to zero.

To fix it, we now just store the two bytes for the marker on the
stack and let the read/write operations copy it from/to the page
buffer later.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-2-frieder.schrempf@kontron.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/spi/core.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -629,18 +629,18 @@ static int spinand_mtd_write(struct mtd_
 static bool spinand_isbad(struct nand_device *nand, const struct nand_pos *pos)
 {
 	struct spinand_device *spinand = nand_to_spinand(nand);
+	u8 marker[2] = { };
 	struct nand_page_io_req req = {
 		.pos = *pos,
-		.ooblen = 2,
+		.ooblen = sizeof(marker),
 		.ooboffs = 0,
-		.oobbuf.in = spinand->oobbuf,
+		.oobbuf.in = marker,
 		.mode = MTD_OPS_RAW,
 	};
 
-	memset(spinand->oobbuf, 0, 2);
 	spinand_select_target(spinand, pos->target);
 	spinand_read_page(spinand, &req, false);
-	if (spinand->oobbuf[0] != 0xff || spinand->oobbuf[1] != 0xff)
+	if (marker[0] != 0xff || marker[1] != 0xff)
 		return true;
 
 	return false;
@@ -664,11 +664,12 @@ static int spinand_mtd_block_isbad(struc
 static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos)
 {
 	struct spinand_device *spinand = nand_to_spinand(nand);
+	u8 marker[2] = { };
 	struct nand_page_io_req req = {
 		.pos = *pos,
 		.ooboffs = 0,
-		.ooblen = 2,
-		.oobbuf.out = spinand->oobbuf,
+		.ooblen = sizeof(marker),
+		.oobbuf.out = marker,
 	};
 	int ret;
 
@@ -683,7 +684,6 @@ static int spinand_markbad(struct nand_d
 
 	spinand_erase_op(spinand, pos);
 
-	memset(spinand->oobbuf, 0, 2);
 	return spinand_write_page(spinand, &req);
 }
 

[PATCH 4.19 088/146] mtd: spinand: Do not erase the block before writing a bad block marker

[Greg Kroah-Hartman]

From: Frieder Schrempf <frieder.schrempf@kontron.de>

commit b645ad39d56846618704e463b24bb994c9585c7f upstream.

Currently when marking a block, we use spinand_erase_op() to erase
the block before writing the marker to the OOB area. Doing so without
waiting for the operation to finish can lead to the marking failing
silently and no bad block marker being written to the flash.

In fact we don't need to do an erase at all before writing the BBM.
The ECC is disabled for raw accesses to the OOB data and we don't
need to work around any issues with chips reporting ECC errors as it
is known to be the case for raw NAND.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-4-frieder.schrempf@kontron.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/spi/core.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -673,7 +673,6 @@ static int spinand_markbad(struct nand_d
 	};
 	int ret;
 
-	/* Erase block before marking it bad. */
 	ret = spinand_select_target(spinand, pos->target);
 	if (ret)
 		return ret;
@@ -682,8 +681,6 @@ static int spinand_markbad(struct nand_d
 	if (ret)
 		return ret;
 
-	spinand_erase_op(spinand, pos);
-
 	return spinand_write_page(spinand, &req);
 }
 

[PATCH 4.19 089/146] Btrfs: fix crash during unmount due to race with delayed inode workers

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit f0cc2cd70164efe8f75c5d99560f0f69969c72e4 upstream.

During unmount we can have a job from the delayed inode items work queue
still running, that can lead to at least two bad things:

1) A crash, because the worker can try to create a transaction just
   after the fs roots were freed;

2) A transaction leak, because the worker can create a transaction
   before the fs roots are freed and just after we committed the last
   transaction and after we stopped the transaction kthread.

A stack trace example of the crash:

 [79011.691214] kernel BUG at lib/radix-tree.c:982!
 [79011.692056] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
 [79011.693180] CPU: 3 PID: 1394 Comm: kworker/u8:2 Tainted: G        W         5.6.0-rc2-btrfs-next-54 #2
 (...)
 [79011.696789] Workqueue: btrfs-delayed-meta btrfs_work_helper [btrfs]
 [79011.697904] RIP: 0010:radix_tree_tag_set+0xe7/0x170
 (...)
 [79011.702014] RSP: 0018:ffffb3c84a317ca0 EFLAGS: 00010293
 [79011.702949] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
 [79011.704202] RDX: ffffb3c84a317cb0 RSI: ffffb3c84a317ca8 RDI: ffff8db3931340a0
 [79011.705463] RBP: 0000000000000005 R08: 0000000000000005 R09: ffffffff974629d0
 [79011.706756] R10: ffffb3c84a317bc0 R11: 0000000000000001 R12: ffff8db393134000
 [79011.708010] R13: ffff8db3931340a0 R14: ffff8db393134068 R15: 0000000000000001
 [79011.709270] FS:  0000000000000000(0000) GS:ffff8db3b6a00000(0000) knlGS:0000000000000000
 [79011.710699] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [79011.711710] CR2: 00007f22c2a0a000 CR3: 0000000232ad4005 CR4: 00000000003606e0
 [79011.712958] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [79011.714205] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [79011.715448] Call Trace:
 [79011.715925]  record_root_in_trans+0x72/0xf0 [btrfs]
 [79011.716819]  btrfs_record_root_in_trans+0x4b/0x70 [btrfs]
 [79011.717925]  start_transaction+0xdd/0x5c0 [btrfs]
 [79011.718829]  btrfs_async_run_delayed_root+0x17e/0x2b0 [btrfs]
 [79011.719915]  btrfs_work_helper+0xaa/0x720 [btrfs]
 [79011.720773]  process_one_work+0x26d/0x6a0
 [79011.721497]  worker_thread+0x4f/0x3e0
 [79011.722153]  ? process_one_work+0x6a0/0x6a0
 [79011.722901]  kthread+0x103/0x140
 [79011.723481]  ? kthread_create_worker_on_cpu+0x70/0x70
 [79011.724379]  ret_from_fork+0x3a/0x50
 (...)

The following diagram shows a sequence of steps that lead to the crash
during ummount of the filesystem:

        CPU 1                                             CPU 2                                CPU 3

 btrfs_punch_hole()
   btrfs_btree_balance_dirty()
     btrfs_balance_delayed_items()
       --> sees
           fs_info->delayed_root->items
           with value 200, which is greater
           than
           BTRFS_DELAYED_BACKGROUND (128)
           and smaller than
           BTRFS_DELAYED_WRITEBACK (512)
       btrfs_wq_run_delayed_node()
         --> queues a job for
             fs_info->delayed_workers to run
             btrfs_async_run_delayed_root()

                                                                                            btrfs_async_run_delayed_root()
                                                                                              --> job queued by CPU 1

                                                                                              --> starts picking and running
                                                                                                  delayed nodes from the
                                                                                                  prepare_list list

                                                 close_ctree()

                                                   btrfs_delete_unused_bgs()

                                                   btrfs_commit_super()

                                                     btrfs_join_transaction()
                                                       --> gets transaction N

                                                     btrfs_commit_transaction(N)
                                                       --> set transaction state
                                                        to TRANTS_STATE_COMMIT_START

                                                                                             btrfs_first_prepared_delayed_node()
                                                                                               --> picks delayed node X through
                                                                                                   the prepared_list list

                                                       btrfs_run_delayed_items()

                                                         btrfs_first_delayed_node()
                                                           --> also picks delayed node X
                                                               but through the node_list
                                                               list

                                                         __btrfs_commit_inode_delayed_items()
                                                            --> runs all delayed items from
                                                                this node and drops the
                                                                node's item count to 0
                                                                through call to
                                                                btrfs_release_delayed_inode()

                                                         --> finishes running any remaining
                                                             delayed nodes

                                                       --> finishes transaction commit

                                                   --> stops cleaner and transaction threads

                                                   btrfs_free_fs_roots()
                                                     --> frees all roots and removes them
                                                         from the radix tree
                                                         fs_info->fs_roots_radix

                                                                                             btrfs_join_transaction()
                                                                                               start_transaction()
                                                                                                 btrfs_record_root_in_trans()
                                                                                                   record_root_in_trans()
                                                                                                     radix_tree_tag_set()
                                                                                                       --> crashes because
                                                                                                           the root is not in
                                                                                                           the radix tree
                                                                                                           anymore

If the worker is able to call btrfs_join_transaction() before the unmount
task frees the fs roots, we end up leaking a transaction and all its
resources, since after the call to btrfs_commit_super() and stopping the
transaction kthread, we don't expect to have any transaction open anymore.

When this situation happens the worker has a delayed node that has no
more items to run, since the task calling btrfs_run_delayed_items(),
which is doing a transaction commit, picks the same node and runs all
its items first.

We can not wait for the worker to complete when running delayed items
through btrfs_run_delayed_items(), because we call that function in
several phases of a transaction commit, and that could cause a deadlock
because the worker calls btrfs_join_transaction() and the task doing the
transaction commit may have already set the transaction state to
TRANS_STATE_COMMIT_DOING.

Also it's not possible to get into a situation where only some of the
items of a delayed node are added to the fs/subvolume tree in the current
transaction and the remaining ones in the next transaction, because when
running the items of a delayed inode we lock its mutex, effectively
waiting for the worker if the worker is running the items of the delayed
node already.

Since this can only cause issues when unmounting a filesystem, fix it in
a simple way by waiting for any jobs on the delayed workers queue before
calling btrfs_commit_supper() at close_ctree(). This works because at this
point no one can call btrfs_btree_balance_dirty() or
btrfs_balance_delayed_items(), and if we end up waiting for any worker to
complete, btrfs_commit_super() will commit the transaction created by the
worker.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/async-thread.c |    8 ++++++++
 fs/btrfs/async-thread.h |    1 +
 fs/btrfs/disk-io.c      |   13 +++++++++++++
 3 files changed, 22 insertions(+)

--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -434,3 +434,11 @@ void btrfs_set_work_high_priority(struct
 {
 	set_bit(WORK_HIGH_PRIO_BIT, &work->flags);
 }
+
+void btrfs_flush_workqueue(struct btrfs_workqueue *wq)
+{
+	if (wq->high)
+		flush_workqueue(wq->high->normal_wq);
+
+	flush_workqueue(wq->normal->normal_wq);
+}
--- a/fs/btrfs/async-thread.h
+++ b/fs/btrfs/async-thread.h
@@ -73,5 +73,6 @@ void btrfs_set_work_high_priority(struct
 struct btrfs_fs_info *btrfs_work_owner(const struct btrfs_work *work);
 struct btrfs_fs_info *btrfs_workqueue_owner(const struct __btrfs_workqueue *wq);
 bool btrfs_workqueue_normal_congested(const struct btrfs_workqueue *wq);
+void btrfs_flush_workqueue(struct btrfs_workqueue *wq);
 
 #endif
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -3949,6 +3949,19 @@ void close_ctree(struct btrfs_fs_info *f
 		 */
 		btrfs_delete_unused_bgs(fs_info);
 
+		/*
+		 * There might be existing delayed inode workers still running
+		 * and holding an empty delayed inode item. We must wait for
+		 * them to complete first because they can create a transaction.
+		 * This happens when someone calls btrfs_balance_delayed_items()
+		 * and then a transaction commit runs the same delayed nodes
+		 * before any delayed worker has done something with the nodes.
+		 * We must wait for any worker here and not at transaction
+		 * commit time since that could cause a deadlock.
+		 * This is a very rare case.
+		 */
+		btrfs_flush_workqueue(fs_info->delayed_workers);
+
 		ret = btrfs_commit_super(fs_info);
 		if (ret)
 			btrfs_err(fs_info, "commit super ret %d", ret);

[PATCH 4.19 090/146] btrfs: set update the uuid generation as soon as possible

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit 75ec1db8717a8f0a9d9c8d033e542fdaa7b73898 upstream.

In my EIO stress testing I noticed I was getting forced to rescan the
uuid tree pretty often, which was weird.  This is because my error
injection stuff would sometimes inject an error after log replay but
before we loaded the UUID tree.  If log replay committed the transaction
it wouldn't have updated the uuid tree generation, but the tree was
valid and didn't change, so there's no reason to not update the
generation here.

Fix this by setting the BTRFS_FS_UPDATE_UUID_TREE_GEN bit immediately
after reading all the fs roots if the uuid tree generation matches the
fs generation.  Then any transaction commits that happen during mount
won't screw up our uuid tree state, forcing us to do needless uuid
rescans.

Fixes: 70f801754728 ("Btrfs: check UUID tree during mount if required")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/disk-io.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -3007,6 +3007,18 @@ retry_root_backup:
 	fs_info->generation = generation;
 	fs_info->last_trans_committed = generation;
 
+	/*
+	 * If we have a uuid root and we're not being told to rescan we need to
+	 * check the generation here so we can set the
+	 * BTRFS_FS_UPDATE_UUID_TREE_GEN bit.  Otherwise we could commit the
+	 * transaction during a balance or the log replay without updating the
+	 * uuid generation, and then if we crash we would rescan the uuid tree,
+	 * even though it was perfectly fine.
+	 */
+	if (fs_info->uuid_root && !btrfs_test_opt(fs_info, RESCAN_UUID_TREE) &&
+	    fs_info->generation == btrfs_super_uuid_tree_generation(disk_super))
+		set_bit(BTRFS_FS_UPDATE_UUID_TREE_GEN, &fs_info->flags);
+
 	ret = btrfs_verify_dev_extents(fs_info);
 	if (ret) {
 		btrfs_err(fs_info,
@@ -3237,8 +3249,6 @@ retry_root_backup:
 			close_ctree(fs_info);
 			return ret;
 		}
-	} else {
-		set_bit(BTRFS_FS_UPDATE_UUID_TREE_GEN, &fs_info->flags);
 	}
 	set_bit(BTRFS_FS_OPEN, &fs_info->flags);
 

[PATCH 4.19 091/146] btrfs: drop block from cache on error in relocation

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit 8e19c9732ad1d127b5575a10f4fbcacf740500ff upstream.

If we have an error while building the backref tree in relocation we'll
process all the pending edges and then free the node.  However if we
integrated some edges into the cache we'll lose our link to those edges
by simply freeing this node, which means we'll leak memory and
references to any roots that we've found.

Instead we need to use remove_backref_node(), which walks through all of
the edges that are still linked to this node and free's them up and
drops any root references we may be holding.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/relocation.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1141,7 +1141,7 @@ out:
 			free_backref_node(cache, lower);
 		}
 
-		free_backref_node(cache, node);
+		remove_backref_node(cache, node);
 		return ERR_PTR(err);
 	}
 	ASSERT(!node || !node->detached);

[PATCH 4.19 092/146] btrfs: fix missing file extent item for hole after ranged fsync

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 95418ed1d10774cd9a49af6f39e216c1256f1eeb upstream.

When doing a fast fsync for a range that starts at an offset greater than
zero, we can end up with a log that when replayed causes the respective
inode miss a file extent item representing a hole if we are not using the
NO_HOLES feature. This is because for fast fsyncs we don't log any extents
that cover a range different from the one requested in the fsync.

Example scenario to trigger it:

  $ mkfs.btrfs -O ^no-holes -f /dev/sdd
  $ mount /dev/sdd /mnt

  # Create a file with a single 256K and fsync it to clear to full sync
  # bit in the inode - we want the msync below to trigger a fast fsync.
  $ xfs_io -f -c "pwrite -S 0xab 0 256K" -c "fsync" /mnt/foo

  # Force a transaction commit and wipe out the log tree.
  $ sync

  # Dirty 768K of data, increasing the file size to 1Mb, and flush only
  # the range from 256K to 512K without updating the log tree
  # (sync_file_range() does not trigger fsync, it only starts writeback
  # and waits for it to finish).

  $ xfs_io -c "pwrite -S 0xcd 256K 768K" /mnt/foo
  $ xfs_io -c "sync_range -abw 256K 256K" /mnt/foo

  # Now dirty the range from 768K to 1M again and sync that range.
  $ xfs_io -c "mmap -w 768K 256K"        \
           -c "mwrite -S 0xef 768K 256K" \
           -c "msync -s 768K 256K"       \
           -c "munmap"                   \
           /mnt/foo

  <power fail>

  # Mount to replay the log.
  $ mount /dev/sdd /mnt
  $ umount /mnt

  $ btrfs check /dev/sdd
  Opening filesystem to check...
  Checking filesystem on /dev/sdd
  UUID: 482fb574-b288-478e-a190-a9c44a78fca6
  [1/7] checking root items
  [2/7] checking extents
  [3/7] checking free space cache
  [4/7] checking fs roots
  root 5 inode 257 errors 100, file extent discount
  Found file extent holes:
       start: 262144, len: 524288
  ERROR: errors found in fs roots
  found 720896 bytes used, error(s) found
  total csum bytes: 512
  total tree bytes: 131072
  total fs tree bytes: 32768
  total extent tree bytes: 16384
  btree space waste bytes: 123514
  file data blocks allocated: 589824
    referenced 589824

Fix this issue by setting the range to full (0 to LLONG_MAX) when the
NO_HOLES feature is not enabled. This results in extra work being done
but it gives the guarantee we don't end up with missing holes after
replaying the log.

CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/file.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2074,6 +2074,16 @@ int btrfs_sync_file(struct file *file, l
 	btrfs_init_log_ctx(&ctx, inode);
 
 	/*
+	 * Set the range to full if the NO_HOLES feature is not enabled.
+	 * This is to avoid missing file extent items representing holes after
+	 * replaying the log.
+	 */
+	if (!btrfs_fs_incompat(fs_info, NO_HOLES)) {
+		start = 0;
+		end = LLONG_MAX;
+	}
+
+	/*
 	 * We write the dirty pages in the range and wait until they complete
 	 * out of the ->i_mutex. If so, we can flush the dirty pages by
 	 * multi-task, and make the performance up.  See

[PATCH 4.19 093/146] btrfs: fix missing semaphore unlock in btrfs_sync_file

[Greg Kroah-Hartman]

From: Robbie Ko <robbieko@synology.com>

commit 6ff06729c22ec0b7498d900d79cc88cfb8aceaeb upstream.

Ordered ops are started twice in sync file, once outside of inode mutex
and once inside, taking the dio semaphore. There was one error path
missing the semaphore unlock.

Fixes: aab15e8ec2576 ("Btrfs: fix rare chances for data loss when doing a fast fsync")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ add changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/file.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2137,6 +2137,7 @@ int btrfs_sync_file(struct file *file, l
 	 */
 	ret = start_ordered_ops(inode, start, end);
 	if (ret) {
+		up_write(&BTRFS_I(inode)->dio_sem);
 		inode_unlock(inode);
 		goto out;
 	}

[PATCH 4.19 094/146] crypto: mxs-dcp - fix scatterlist linearization for hash

[Greg Kroah-Hartman]

From: Rosioru Dragos <dragos.rosioru@nxp.com>

commit fa03481b6e2e82355c46644147b614f18c7a8161 upstream.

The incorrect traversal of the scatterlist, during the linearization phase
lead to computing the hash value of the wrong input buffer.
New implementation uses scatterwalk_map_and_copy()
to address this issue.

Cc: <stable@vger.kernel.org>
Fixes: 15b59e7c3733 ("crypto: mxs - Add Freescale MXS DCP driver")
Signed-off-by: Rosioru Dragos <dragos.rosioru@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/mxs-dcp.c |   54 ++++++++++++++++++++++-------------------------
 1 file changed, 26 insertions(+), 28 deletions(-)

--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -25,6 +25,7 @@
 #include <crypto/sha.h>
 #include <crypto/internal/hash.h>
 #include <crypto/internal/skcipher.h>
+#include <crypto/scatterwalk.h>
 
 #define DCP_MAX_CHANS	4
 #define DCP_BUF_SZ	PAGE_SIZE
@@ -621,49 +622,46 @@ static int dcp_sha_req_to_buf(struct cry
 	struct dcp_async_ctx *actx = crypto_ahash_ctx(tfm);
 	struct dcp_sha_req_ctx *rctx = ahash_request_ctx(req);
 	struct hash_alg_common *halg = crypto_hash_alg_common(tfm);
-	const int nents = sg_nents(req->src);
 
 	uint8_t *in_buf = sdcp->coh->sha_in_buf;
 	uint8_t *out_buf = sdcp->coh->sha_out_buf;
 
-	uint8_t *src_buf;
-
 	struct scatterlist *src;
 
-	unsigned int i, len, clen;
+	unsigned int i, len, clen, oft = 0;
 	int ret;
 
 	int fin = rctx->fini;
 	if (fin)
 		rctx->fini = 0;
 
-	for_each_sg(req->src, src, nents, i) {
-		src_buf = sg_virt(src);
-		len = sg_dma_len(src);
+	src = req->src;
+	len = req->nbytes;
 
-		do {
-			if (actx->fill + len > DCP_BUF_SZ)
-				clen = DCP_BUF_SZ - actx->fill;
-			else
-				clen = len;
+	while (len) {
+		if (actx->fill + len > DCP_BUF_SZ)
+			clen = DCP_BUF_SZ - actx->fill;
+		else
+			clen = len;
 
-			memcpy(in_buf + actx->fill, src_buf, clen);
-			len -= clen;
-			src_buf += clen;
-			actx->fill += clen;
+		scatterwalk_map_and_copy(in_buf + actx->fill, src, oft, clen,
+					 0);
 
-			/*
-			 * If we filled the buffer and still have some
-			 * more data, submit the buffer.
-			 */
-			if (len && actx->fill == DCP_BUF_SZ) {
-				ret = mxs_dcp_run_sha(req);
-				if (ret)
-					return ret;
-				actx->fill = 0;
-				rctx->init = 0;
-			}
-		} while (len);
+		len -= clen;
+		oft += clen;
+		actx->fill += clen;
+
+		/*
+		 * If we filled the buffer and still have some
+		 * more data, submit the buffer.
+		 */
+		if (len && actx->fill == DCP_BUF_SZ) {
+			ret = mxs_dcp_run_sha(req);
+			if (ret)
+				return ret;
+			actx->fill = 0;
+			rctx->init = 0;
+		}
 	}
 
 	if (fin) {

[PATCH 4.19 095/146] erofs: correct the remaining shrink objects

[Greg Kroah-Hartman]

From: Gao Xiang <gaoxiang25@huawei.com>

commit 9d5a09c6f3b5fb85af20e3a34827b5d27d152b34 upstream.

The remaining count should not include successful
shrink attempts.

Fixes: e7e9a307be9d ("staging: erofs: introduce workstation for decompression")
Cc: <stable@vger.kernel.org> # 4.19+
Link: https://lore.kernel.org/r/20200226081008.86348-1-gaoxiang25@huawei.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/staging/erofs/utils.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/erofs/utils.c
+++ b/drivers/staging/erofs/utils.c
@@ -309,7 +309,7 @@ unsigned long erofs_shrink_scan(struct s
 		sbi->shrinker_run_no = run_no;
 
 #ifdef CONFIG_EROFS_FS_ZIP
-		freed += erofs_shrink_workstation(sbi, nr, false);
+		freed += erofs_shrink_workstation(sbi, nr - freed, false);
 #endif
 
 		spin_lock(&erofs_sb_list_lock);

[PATCH 4.19 096/146] powerpc/pseries: Drop pointless static qualifier in vpa_debugfs_init()

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

commit 11dd34f3eae5a468013bb161a1dcf1fecd2ca321 upstream.

There is no need to have the 'struct dentry *vpa_dir' variable static
since new value always be assigned before use it.

Fixes: c6c26fb55e8e ("powerpc/pseries: Export raw per-CPU VPA data via debugfs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190218125644.87448-1-yuehaibing@huawei.com
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/pseries/lpar.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -1056,7 +1056,7 @@ static int __init vpa_debugfs_init(void)
 {
 	char name[16];
 	long i;
-	static struct dentry *vpa_dir;
+	struct dentry *vpa_dir;
 
 	if (!firmware_has_feature(FW_FEATURE_SPLPAR))
 		return 0;

[PATCH 4.19 097/146] x86/speculation: Remove redundant arch_smt_update() invocation

[Greg Kroah-Hartman]

From: Zhenzhong Duan <zhenzhong.duan@oracle.com>

commit 34d66caf251df91ff27b24a3a786810d29989eca upstream.

With commit a74cfffb03b7 ("x86/speculation: Rework SMT state change"),
arch_smt_update() is invoked from each individual CPU hotplug function.

Therefore the extra arch_smt_update() call in the sysfs SMT control is
redundant.

Fixes: a74cfffb03b7 ("x86/speculation: Rework SMT state change")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <konrad.wilk@oracle.com>
Cc: <dwmw@amazon.co.uk>
Cc: <bp@suse.de>
Cc: <srinivas.eeda@oracle.com>
Cc: <peterz@infradead.org>
Cc: <hpa@zytor.com>
Link: https://lkml.kernel.org/r/e2e064f2-e8ef-42ca-bf4f-76b612964752@default
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/cpu.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -2070,10 +2070,8 @@ int cpuhp_smt_disable(enum cpuhp_smt_con
 		 */
 		cpuhp_offline_cpu_device(cpu);
 	}
-	if (!ret) {
+	if (!ret)
 		cpu_smt_control = ctrlval;
-		arch_smt_update();
-	}
 	cpu_maps_update_done();
 	return ret;
 }
@@ -2084,7 +2082,6 @@ int cpuhp_smt_enable(void)
 
 	cpu_maps_update_begin();
 	cpu_smt_control = CPU_SMT_ENABLED;
-	arch_smt_update();
 	for_each_present_cpu(cpu) {
 		/* Skip online CPUs and CPUs on offline nodes */
 		if (cpu_online(cpu) || !node_online(cpu_to_node(cpu)))

[PATCH 4.19 098/146] tools: gpio: Fix out-of-tree build regression

[Greg Kroah-Hartman]

From: Anssi Hannula <anssi.hannula@bitwise.fi>

commit 82f04bfe2aff428b063eefd234679b2d693228ed upstream.

Commit 0161a94e2d1c7 ("tools: gpio: Correctly add make dependencies for
gpio_utils") added a make rule for gpio-utils-in.o but used $(output)
instead of the correct $(OUTPUT) for the output directory, breaking
out-of-tree build (O=xx) with the following error:

  No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'.  Stop.

Fix that.

Fixes: 0161a94e2d1c ("tools: gpio: Correctly add make dependencies for gpio_utils")
Cc: <stable@vger.kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/gpio/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/gpio/Makefile
+++ b/tools/gpio/Makefile
@@ -35,7 +35,7 @@ $(OUTPUT)include/linux/gpio.h: ../../inc
 
 prepare: $(OUTPUT)include/linux/gpio.h
 
-GPIO_UTILS_IN := $(output)gpio-utils-in.o
+GPIO_UTILS_IN := $(OUTPUT)gpio-utils-in.o
 $(GPIO_UTILS_IN): prepare FORCE
 	$(Q)$(MAKE) $(build)=gpio-utils
 

[PATCH 4.19 099/146] mm: Use fixed constant in page_frag_alloc instead of size + 1

[Greg Kroah-Hartman]

From: Alexander Duyck <alexander.h.duyck@linux.intel.com>

commit 8644772637deb121f7ac2df690cbf83fa63d3b70 upstream.

This patch replaces the size + 1 value introduced with the recent fix for 1
byte allocs with a constant value.

The idea here is to reduce code overhead as the previous logic would have
to read size into a register, then increment it, and write it back to
whatever field was being used. By using a constant we can avoid those
memory reads and arithmetic operations in favor of just encoding the
maximum value into the operation itself.

Fixes: 2c2ade81741c ("mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_alloc.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4537,11 +4537,11 @@ refill:
 		/* Even if we own the page, we do not use atomic_set().
 		 * This would break get_page_unless_zero() users.
 		 */
-		page_ref_add(page, size);
+		page_ref_add(page, PAGE_FRAG_CACHE_MAX_SIZE);
 
 		/* reset page count bias and offset to start of new frag */
 		nc->pfmemalloc = page_is_pfmemalloc(page);
-		nc->pagecnt_bias = size + 1;
+		nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1;
 		nc->offset = size;
 	}
 
@@ -4557,10 +4557,10 @@ refill:
 		size = nc->size;
 #endif
 		/* OK, page count is 0, we can safely set it */
-		set_page_count(page, size + 1);
+		set_page_count(page, PAGE_FRAG_CACHE_MAX_SIZE + 1);
 
 		/* reset page count bias and offset to start of new frag */
-		nc->pagecnt_bias = size + 1;
+		nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1;
 		offset = size - fragsz;
 	}
 

[PATCH 4.19 100/146] net: qualcomm: rmnet: Allow configuration updates to existing devices

[Greg Kroah-Hartman]

From: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>

commit 2abb5792387eb188b12051337d5dcd2cba615cb0 upstream.

This allows the changelink operation to succeed if the mux_id was
specified as an argument. Note that the mux_id must match the
existing mux_id of the rmnet device or should be an unused mux_id.

Fixes: 1dc49e9d164c ("net: rmnet: do not allow to change mux id if mux id is duplicated")
Reported-and-tested-by: Alex Elder <elder@linaro.org>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c |   31 ++++++++++++---------
 1 file changed, 19 insertions(+), 12 deletions(-)

--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -288,7 +288,6 @@ static int rmnet_changelink(struct net_d
 {
 	struct rmnet_priv *priv = netdev_priv(dev);
 	struct net_device *real_dev;
-	struct rmnet_endpoint *ep;
 	struct rmnet_port *port;
 	u16 mux_id;
 
@@ -303,19 +302,27 @@ static int rmnet_changelink(struct net_d
 
 	if (data[IFLA_RMNET_MUX_ID]) {
 		mux_id = nla_get_u16(data[IFLA_RMNET_MUX_ID]);
-		if (rmnet_get_endpoint(port, mux_id)) {
-			NL_SET_ERR_MSG_MOD(extack, "MUX ID already exists");
-			return -EINVAL;
-		}
-		ep = rmnet_get_endpoint(port, priv->mux_id);
-		if (!ep)
-			return -ENODEV;
 
-		hlist_del_init_rcu(&ep->hlnode);
-		hlist_add_head_rcu(&ep->hlnode, &port->muxed_ep[mux_id]);
+		if (mux_id != priv->mux_id) {
+			struct rmnet_endpoint *ep;
+
+			ep = rmnet_get_endpoint(port, priv->mux_id);
+			if (!ep)
+				return -ENODEV;
+
+			if (rmnet_get_endpoint(port, mux_id)) {
+				NL_SET_ERR_MSG_MOD(extack,
+						   "MUX ID already exists");
+				return -EINVAL;
+			}
+
+			hlist_del_init_rcu(&ep->hlnode);
+			hlist_add_head_rcu(&ep->hlnode,
+					   &port->muxed_ep[mux_id]);
 
-		ep->mux_id = mux_id;
-		priv->mux_id = mux_id;
+			ep->mux_id = mux_id;
+			priv->mux_id = mux_id;
+		}
 	}
 
 	if (data[IFLA_RMNET_FLAGS]) {

[PATCH 4.19 101/146] arm64: dts: allwinner: h6: Fix PMU compatible

[Greg Kroah-Hartman]

From: Maxime Ripard <maxime@cerno.tech>

commit 4c7eeb9af3e41ae7d840977119c58f3bbb3f4f59 upstream.

The commit 7aa9b9eb7d6a ("arm64: dts: allwinner: H6: Add PMU mode")
introduced support for the PMU found on the Allwinner H6. However, the
binding only allows for a single compatible, while the patch was adding
two.

Make sure we follow the binding.

Fixes: 7aa9b9eb7d6a ("arm64: dts: allwinner: H6: Add PMU mode")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -70,8 +70,7 @@
 	};
 
 	pmu {
-		compatible = "arm,cortex-a53-pmu",
-			     "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,

[PATCH 4.19 102/146] dm writecache: add cond_resched to avoid CPU hangs

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 1edaa447d958bec24c6a79685a5790d98976fd16 upstream.

Initializing a dm-writecache device can take a long time when the
persistent memory device is large.  Add cond_resched() to a few loops
to avoid warnings that the CPU is stuck.

Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-writecache.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/md/dm-writecache.c
+++ b/drivers/md/dm-writecache.c
@@ -878,6 +878,7 @@ static int writecache_alloc_entries(stru
 		struct wc_entry *e = &wc->entries[b];
 		e->index = b;
 		e->write_in_progress = false;
+		cond_resched();
 	}
 
 	return 0;
@@ -932,6 +933,7 @@ static void writecache_resume(struct dm_
 			e->original_sector = le64_to_cpu(wme.original_sector);
 			e->seq_count = le64_to_cpu(wme.seq_count);
 		}
+		cond_resched();
 	}
 #endif
 	for (b = 0; b < wc->n_blocks; b++) {
@@ -1764,8 +1766,10 @@ static int init_memory(struct dm_writeca
 	pmem_assign(sb(wc)->n_blocks, cpu_to_le64(wc->n_blocks));
 	pmem_assign(sb(wc)->seq_count, cpu_to_le64(0));
 
-	for (b = 0; b < wc->n_blocks; b++)
+	for (b = 0; b < wc->n_blocks; b++) {
 		write_original_sector_seq_count(wc, &wc->entries[b], -1, -1);
+		cond_resched();
+	}
 
 	writecache_flush_all_metadata(wc);
 	writecache_commit_flushed(wc, false);

[PATCH 4.19 103/146] dm verity fec: fix memory leak in verity_fec_dtr

[Greg Kroah-Hartman]

From: Shetty, Harshini X (EXT-Sony Mobile) <Harshini.X.Shetty@sony.com>

commit 75fa601934fda23d2f15bf44b09c2401942d8e15 upstream.

Fix below kmemleak detected in verity_fec_ctr. output_pool is
allocated for each dm-verity-fec device. But it is not freed when
dm-table for the verity target is removed. Hence free the output
mempool in destructor function verity_fec_dtr.

unreferenced object 0xffffffffa574d000 (size 4096):
  comm "init", pid 1667, jiffies 4294894890 (age 307.168s)
  hex dump (first 32 bytes):
    8e 36 00 98 66 a8 0b 9b 00 00 00 00 00 00 00 00  .6..f...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000060e82407>] __kmalloc+0x2b4/0x340
    [<00000000dd99488f>] mempool_kmalloc+0x18/0x20
    [<000000002560172b>] mempool_init_node+0x98/0x118
    [<000000006c3574d2>] mempool_init+0x14/0x20
    [<0000000008cb266e>] verity_fec_ctr+0x388/0x3b0
    [<000000000887261b>] verity_ctr+0x87c/0x8d0
    [<000000002b1e1c62>] dm_table_add_target+0x174/0x348
    [<000000002ad89eda>] table_load+0xe4/0x328
    [<000000001f06f5e9>] dm_ctl_ioctl+0x3b4/0x5a0
    [<00000000bee5fbb7>] do_vfs_ioctl+0x5dc/0x928
    [<00000000b475b8f5>] __arm64_sys_ioctl+0x70/0x98
    [<000000005361e2e8>] el0_svc_common+0xa0/0x158
    [<000000001374818f>] el0_svc_handler+0x6c/0x88
    [<000000003364e9f4>] el0_svc+0x8/0xc
    [<000000009d84cec9>] 0xffffffffffffffff

Fixes: a739ff3f543af ("dm verity: add support for forward error correction")
Depends-on: 6f1c819c219f7 ("dm: convert to bioset_init()/mempool_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Harshini Shetty <harshini.x.shetty@sony.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-verity-fec.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/md/dm-verity-fec.c
+++ b/drivers/md/dm-verity-fec.c
@@ -552,6 +552,7 @@ void verity_fec_dtr(struct dm_verity *v)
 	mempool_exit(&f->rs_pool);
 	mempool_exit(&f->prealloc_pool);
 	mempool_exit(&f->extra_pool);
+	mempool_exit(&f->output_pool);
 	kmem_cache_destroy(f->cache);
 
 	if (f->data_bufio)

[PATCH 4.19 104/146] scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-point

[Greg Kroah-Hartman]

From: Steffen Maier <maier@linux.ibm.com>

commit 819732be9fea728623e1ed84eba28def7384ad1f upstream.

v2.6.27 commit cc8c282963bd ("[SCSI] zfcp: Automatically attach remote
ports") introduced zfcp automatic port scan.

Before that, the user had to use the sysfs attribute "port_add" of an FCP
device (adapter) to add and open remote (target) ports, even for the remote
peer port in point-to-point topology. That code path did a proper port open
recovery trigger taking the erp_lock.

Since above commit, a new helper function zfcp_erp_open_ptp_port()
performed an UNlocked port open recovery trigger. This can race with other
parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt
e.g. adapter->erp_total_count or adapter->erp_ready_head.

As already found for fabric topology in v4.17 commit fa89adba1941 ("scsi:
zfcp: fix infinite iteration on ERP ready list"), there was an endless loop
during tracing of rport (un)block.  A subsequent v4.18 commit 9e156c54ace3
("scsi: zfcp: assert that the ERP lock is held when tracing a recovery
trigger") introduced a lockdep assertion for that case.

As a side effect, that lockdep assertion now uncovered the unlocked code
path for PtP. It is from within an adapter ERP action:

zfcp_erp_strategy[1479]  intentionally DROPs erp lock around
                         zfcp_erp_strategy_do_action()
zfcp_erp_strategy_do_action[1441]      NO erp lock
zfcp_erp_adapter_strategy[876]         NO erp lock
zfcp_erp_adapter_strategy_open[855]    NO erp lock
zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock
zfcp_erp_adapter_strat_fsf_xconf[772]  erp lock only around
                                       zfcp_erp_action_to_running(),
                                       BUT *_not_* around
                                       zfcp_erp_enqueue_ptp_port()
zfcp_erp_enqueue_ptp_port[728]         BUG: *_not_* taking erp lock
_zfcp_erp_port_reopen[432]             assumes to be called with erp lock
zfcp_erp_action_enqueue[314]           assumes to be called with erp lock
zfcp_dbf_rec_trig[288]                 _checks_ to be called with erp lock:
	lockdep_assert_held(&adapter->erp_lock);

It causes the following lockdep warning:

WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288
                            zfcp_dbf_rec_trig+0x16a/0x188
no locks held by zfcperp0.0.17c0/775.

Fix this by using the proper locked recovery trigger helper function.

Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com
Fixes: cc8c282963bd ("[SCSI] zfcp: Automatically attach remote ports")
Cc: <stable@vger.kernel.org> #v2.6.27+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/scsi/zfcp_erp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -738,7 +738,7 @@ static void zfcp_erp_enqueue_ptp_port(st
 				 adapter->peer_d_id);
 	if (IS_ERR(port)) /* error or port already attached */
 		return;
-	_zfcp_erp_port_reopen(port, 0, "ereptp1");
+	zfcp_erp_port_reopen(port, 0, "ereptp1");
 }
 
 static int zfcp_erp_adapter_strat_fsf_xconf(struct zfcp_erp_action *erp_action)

[PATCH 4.19 105/146] arm64: armv8_deprecated: Fix undef_hook mask for thumb setend

[Greg Kroah-Hartman]

From: Fredrik Strupe <fredrik@strupe.net>

commit fc2266011accd5aeb8ebc335c381991f20e26e33 upstream.

For thumb instructions, call_undef_hook() in traps.c first reads a u16,
and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second
u16 is read, which then makes up the the lower half-word of a T32
instruction. For T16 instructions, the second u16 is not read,
which makes the resulting u32 opcode always have the upper half set to
0.

However, having the upper half of instr_mask in the undef_hook set to 0
masks out the upper half of all thumb instructions - both T16 and T32.
This results in trapped T32 instructions with the lower half-word equal
to the T16 encoding of setend (b650) being matched, even though the upper
half-word is not 0000 and thus indicates a T32 opcode.

An example of such a T32 instruction is eaa0b650, which should raise a
SIGILL since T32 instructions with an eaa prefix are unallocated as per
Arm ARM, but instead works as a SETEND because the second half-word is set
to b650.

This patch fixes the issue by extending instr_mask to include the
upper u32 half, which will still match T16 instructions where the upper
half is 0, but not T32 instructions.

Fixes: 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")
Cc: <stable@vger.kernel.org> # 4.0.x-
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kernel/armv8_deprecated.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -604,7 +604,7 @@ static struct undef_hook setend_hooks[]
 	},
 	{
 		/* Thumb mode */
-		.instr_mask	= 0x0000fff7,
+		.instr_mask	= 0xfffffff7,
 		.instr_val	= 0x0000b650,
 		.pstate_mask	= (PSR_AA32_T_BIT | PSR_AA32_MODE_MASK),
 		.pstate_val	= (PSR_AA32_T_BIT | PSR_AA32_MODE_USR),

[PATCH 4.19 106/146] selftests: vm: drop dependencies on page flags from mlock2 tests

[Greg Kroah-Hartman]

From: Michal Hocko <mhocko@suse.com>

commit eea274d64e6ea8aff2224d33d0851133a84cc7b5 upstream.

It was noticed that mlock2 tests are failing after 9c4e6b1a7027f ("mm,
mlock, vmscan: no more skipping pagevecs") because the patch has changed
the timing on when the page is added to the unevictable LRU list and thus
gains the unevictable page flag.

The test was just too dependent on the implementation details which were
true at the time when it was introduced.  Page flags and the timing when
they are set is something no userspace should ever depend on.  The test
should be testing only for the user observable contract of the tested
syscalls.  Those are defined pretty well for the mlock and there are other
means for testing them.  In fact this is already done and testing for page
flags can be safely dropped to achieve the aimed purpose.  Present bits
can be checked by /proc/<pid>/smaps RSS field and the locking state by
VmFlags although I would argue that Locked: field would be more
appropriate.

Drop all the page flag machinery and considerably simplify the test.  This
should be more robust for future kernel changes while checking the
promised contract is still valid.

Fixes: 9c4e6b1a7027f ("mm, mlock, vmscan: no more skipping pagevecs")
Reported-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200324154218.GS19542@dhcp22.suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/vm/mlock2-tests.c |  233 ++++--------------------------
 1 file changed, 37 insertions(+), 196 deletions(-)

--- a/tools/testing/selftests/vm/mlock2-tests.c
+++ b/tools/testing/selftests/vm/mlock2-tests.c
@@ -67,59 +67,6 @@ out:
 	return ret;
 }
 
-static uint64_t get_pageflags(unsigned long addr)
-{
-	FILE *file;
-	uint64_t pfn;
-	unsigned long offset;
-
-	file = fopen("/proc/self/pagemap", "r");
-	if (!file) {
-		perror("fopen pagemap");
-		_exit(1);
-	}
-
-	offset = addr / getpagesize() * sizeof(pfn);
-
-	if (fseek(file, offset, SEEK_SET)) {
-		perror("fseek pagemap");
-		_exit(1);
-	}
-
-	if (fread(&pfn, sizeof(pfn), 1, file) != 1) {
-		perror("fread pagemap");
-		_exit(1);
-	}
-
-	fclose(file);
-	return pfn;
-}
-
-static uint64_t get_kpageflags(unsigned long pfn)
-{
-	uint64_t flags;
-	FILE *file;
-
-	file = fopen("/proc/kpageflags", "r");
-	if (!file) {
-		perror("fopen kpageflags");
-		_exit(1);
-	}
-
-	if (fseek(file, pfn * sizeof(flags), SEEK_SET)) {
-		perror("fseek kpageflags");
-		_exit(1);
-	}
-
-	if (fread(&flags, sizeof(flags), 1, file) != 1) {
-		perror("fread kpageflags");
-		_exit(1);
-	}
-
-	fclose(file);
-	return flags;
-}
-
 #define VMFLAGS "VmFlags:"
 
 static bool is_vmflag_set(unsigned long addr, const char *vmflag)
@@ -159,19 +106,13 @@ out:
 #define RSS  "Rss:"
 #define LOCKED "lo"
 
-static bool is_vma_lock_on_fault(unsigned long addr)
+static unsigned long get_value_for_name(unsigned long addr, const char *name)
 {
-	bool ret = false;
-	bool locked;
-	FILE *smaps = NULL;
-	unsigned long vma_size, vma_rss;
 	char *line = NULL;
-	char *value;
 	size_t size = 0;
-
-	locked = is_vmflag_set(addr, LOCKED);
-	if (!locked)
-		goto out;
+	char *value_ptr;
+	FILE *smaps = NULL;
+	unsigned long value = -1UL;
 
 	smaps = seek_to_smaps_entry(addr);
 	if (!smaps) {
@@ -180,112 +121,70 @@ static bool is_vma_lock_on_fault(unsigne
 	}
 
 	while (getline(&line, &size, smaps) > 0) {
-		if (!strstr(line, SIZE)) {
+		if (!strstr(line, name)) {
 			free(line);
 			line = NULL;
 			size = 0;
 			continue;
 		}
 
-		value = line + strlen(SIZE);
-		if (sscanf(value, "%lu kB", &vma_size) < 1) {
+		value_ptr = line + strlen(name);
+		if (sscanf(value_ptr, "%lu kB", &value) < 1) {
 			printf("Unable to parse smaps entry for Size\n");
 			goto out;
 		}
 		break;
 	}
 
-	while (getline(&line, &size, smaps) > 0) {
-		if (!strstr(line, RSS)) {
-			free(line);
-			line = NULL;
-			size = 0;
-			continue;
-		}
-
-		value = line + strlen(RSS);
-		if (sscanf(value, "%lu kB", &vma_rss) < 1) {
-			printf("Unable to parse smaps entry for Rss\n");
-			goto out;
-		}
-		break;
-	}
-
-	ret = locked && (vma_rss < vma_size);
 out:
-	free(line);
 	if (smaps)
 		fclose(smaps);
-	return ret;
+	free(line);
+	return value;
 }
 
-#define PRESENT_BIT     0x8000000000000000ULL
-#define PFN_MASK        0x007FFFFFFFFFFFFFULL
-#define UNEVICTABLE_BIT (1UL << 18)
-
-static int lock_check(char *map)
+static bool is_vma_lock_on_fault(unsigned long addr)
 {
-	unsigned long page_size = getpagesize();
-	uint64_t page1_flags, page2_flags;
+	bool locked;
+	unsigned long vma_size, vma_rss;
+
+	locked = is_vmflag_set(addr, LOCKED);
+	if (!locked)
+		return false;
 
-	page1_flags = get_pageflags((unsigned long)map);
-	page2_flags = get_pageflags((unsigned long)map + page_size);
+	vma_size = get_value_for_name(addr, SIZE);
+	vma_rss = get_value_for_name(addr, RSS);
 
-	/* Both pages should be present */
-	if (((page1_flags & PRESENT_BIT) == 0) ||
-	    ((page2_flags & PRESENT_BIT) == 0)) {
-		printf("Failed to make both pages present\n");
-		return 1;
-	}
+	/* only one page is faulted in */
+	return (vma_rss < vma_size);
+}
 
-	page1_flags = get_kpageflags(page1_flags & PFN_MASK);
-	page2_flags = get_kpageflags(page2_flags & PFN_MASK);
+#define PRESENT_BIT     0x8000000000000000ULL
+#define PFN_MASK        0x007FFFFFFFFFFFFFULL
+#define UNEVICTABLE_BIT (1UL << 18)
 
-	/* Both pages should be unevictable */
-	if (((page1_flags & UNEVICTABLE_BIT) == 0) ||
-	    ((page2_flags & UNEVICTABLE_BIT) == 0)) {
-		printf("Failed to make both pages unevictable\n");
-		return 1;
-	}
+static int lock_check(unsigned long addr)
+{
+	bool locked;
+	unsigned long vma_size, vma_rss;
 
-	if (!is_vmflag_set((unsigned long)map, LOCKED)) {
-		printf("VMA flag %s is missing on page 1\n", LOCKED);
-		return 1;
-	}
+	locked = is_vmflag_set(addr, LOCKED);
+	if (!locked)
+		return false;
 
-	if (!is_vmflag_set((unsigned long)map + page_size, LOCKED)) {
-		printf("VMA flag %s is missing on page 2\n", LOCKED);
-		return 1;
-	}
+	vma_size = get_value_for_name(addr, SIZE);
+	vma_rss = get_value_for_name(addr, RSS);
 
-	return 0;
+	return (vma_rss == vma_size);
 }
 
 static int unlock_lock_check(char *map)
 {
-	unsigned long page_size = getpagesize();
-	uint64_t page1_flags, page2_flags;
-
-	page1_flags = get_pageflags((unsigned long)map);
-	page2_flags = get_pageflags((unsigned long)map + page_size);
-	page1_flags = get_kpageflags(page1_flags & PFN_MASK);
-	page2_flags = get_kpageflags(page2_flags & PFN_MASK);
-
-	if ((page1_flags & UNEVICTABLE_BIT) || (page2_flags & UNEVICTABLE_BIT)) {
-		printf("A page is still marked unevictable after unlock\n");
-		return 1;
-	}
-
 	if (is_vmflag_set((unsigned long)map, LOCKED)) {
 		printf("VMA flag %s is present on page 1 after unlock\n", LOCKED);
 		return 1;
 	}
 
-	if (is_vmflag_set((unsigned long)map + page_size, LOCKED)) {
-		printf("VMA flag %s is present on page 2 after unlock\n", LOCKED);
-		return 1;
-	}
-
 	return 0;
 }
 
@@ -311,7 +210,7 @@ static int test_mlock_lock()
 		goto unmap;
 	}
 
-	if (lock_check(map))
+	if (!lock_check((unsigned long)map))
 		goto unmap;
 
 	/* Now unlock and recheck attributes */
@@ -330,64 +229,18 @@ out:
 
 static int onfault_check(char *map)
 {
-	unsigned long page_size = getpagesize();
-	uint64_t page1_flags, page2_flags;
-
-	page1_flags = get_pageflags((unsigned long)map);
-	page2_flags = get_pageflags((unsigned long)map + page_size);
-
-	/* Neither page should be present */
-	if ((page1_flags & PRESENT_BIT) || (page2_flags & PRESENT_BIT)) {
-		printf("Pages were made present by MLOCK_ONFAULT\n");
-		return 1;
-	}
-
 	*map = 'a';
-	page1_flags = get_pageflags((unsigned long)map);
-	page2_flags = get_pageflags((unsigned long)map + page_size);
-
-	/* Only page 1 should be present */
-	if ((page1_flags & PRESENT_BIT) == 0) {
-		printf("Page 1 is not present after fault\n");
-		return 1;
-	} else if (page2_flags & PRESENT_BIT) {
-		printf("Page 2 was made present\n");
-		return 1;
-	}
-
-	page1_flags = get_kpageflags(page1_flags & PFN_MASK);
-
-	/* Page 1 should be unevictable */
-	if ((page1_flags & UNEVICTABLE_BIT) == 0) {
-		printf("Failed to make faulted page unevictable\n");
-		return 1;
-	}
-
 	if (!is_vma_lock_on_fault((unsigned long)map)) {
 		printf("VMA is not marked for lock on fault\n");
 		return 1;
 	}
 
-	if (!is_vma_lock_on_fault((unsigned long)map + page_size)) {
-		printf("VMA is not marked for lock on fault\n");
-		return 1;
-	}
-
 	return 0;
 }
 
 static int unlock_onfault_check(char *map)
 {
 	unsigned long page_size = getpagesize();
-	uint64_t page1_flags;
-
-	page1_flags = get_pageflags((unsigned long)map);
-	page1_flags = get_kpageflags(page1_flags & PFN_MASK);
-
-	if (page1_flags & UNEVICTABLE_BIT) {
-		printf("Page 1 is still marked unevictable after unlock\n");
-		return 1;
-	}
 
 	if (is_vma_lock_on_fault((unsigned long)map) ||
 	    is_vma_lock_on_fault((unsigned long)map + page_size)) {
@@ -445,7 +298,6 @@ static int test_lock_onfault_of_present(
 	char *map;
 	int ret = 1;
 	unsigned long page_size = getpagesize();
-	uint64_t page1_flags, page2_flags;
 
 	map = mmap(NULL, 2 * page_size, PROT_READ | PROT_WRITE,
 		   MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
@@ -465,17 +317,6 @@ static int test_lock_onfault_of_present(
 		goto unmap;
 	}
 
-	page1_flags = get_pageflags((unsigned long)map);
-	page2_flags = get_pageflags((unsigned long)map + page_size);
-	page1_flags = get_kpageflags(page1_flags & PFN_MASK);
-	page2_flags = get_kpageflags(page2_flags & PFN_MASK);
-
-	/* Page 1 should be unevictable */
-	if ((page1_flags & UNEVICTABLE_BIT) == 0) {
-		printf("Failed to make present page unevictable\n");
-		goto unmap;
-	}
-
 	if (!is_vma_lock_on_fault((unsigned long)map) ||
 	    !is_vma_lock_on_fault((unsigned long)map + page_size)) {
 		printf("VMA with present pages is not marked lock on fault\n");
@@ -507,7 +348,7 @@ static int test_munlockall()
 		goto out;
 	}
 
-	if (lock_check(map))
+	if (!lock_check((unsigned long)map))
 		goto unmap;
 
 	if (munlockall()) {
@@ -549,7 +390,7 @@ static int test_munlockall()
 		goto out;
 	}
 
-	if (lock_check(map))
+	if (!lock_check((unsigned long)map))
 		goto unmap;
 
 	if (munlockall()) {

[PATCH 4.19 107/146] rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGH

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

commit c50156526a2f7176b50134e3e5fb108ba09791b2 upstream.

Clang warns when one enumerated type is implicitly converted to another:

drivers/rtc/rtc-omap.c:574:21: warning: implicit conversion from
enumeration type 'enum rtc_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        {"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0},
        ~                  ^~~~~~~~~~~~~~~~~~~~~~
drivers/rtc/rtc-omap.c:579:12: warning: implicit conversion from
enumeration type 'enum rtc_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false),
        ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
        .param = a, .display = b, .format = c, .has_arg = d     \
                 ^
2 warnings generated.

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/144
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-omap.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -561,9 +561,7 @@ static const struct pinctrl_ops rtc_pinc
 	.dt_free_map = pinconf_generic_dt_free_map,
 };
 
-enum rtc_pin_config_param {
-	PIN_CONFIG_ACTIVE_HIGH = PIN_CONFIG_END + 1,
-};
+#define PIN_CONFIG_ACTIVE_HIGH		(PIN_CONFIG_END + 1)
 
 static const struct pinconf_generic_params rtc_params[] = {
 	{"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0},

[PATCH 4.19 108/146] drm/etnaviv: rework perfmon query infrastructure

[Greg Kroah-Hartman]

From: Christian Gmeiner <christian.gmeiner@gmail.com>

commit ed1dd899baa32d47d9a93d98336472da50564346 upstream.

Report the correct perfmon domains and signals depending
on the supported feature flags.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 9e2c2e273012 ("drm/etnaviv: add infrastructure to query perf counter")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/etnaviv/etnaviv_perfmon.c |   60 ++++++++++++++++++++++++++----
 1 file changed, 53 insertions(+), 7 deletions(-)

--- a/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c
@@ -4,6 +4,7 @@
  * Copyright (C) 2017 Zodiac Inflight Innovations
  */
 
+#include "common.xml.h"
 #include "etnaviv_gpu.h"
 #include "etnaviv_perfmon.h"
 #include "state_hi.xml.h"
@@ -31,6 +32,7 @@ struct etnaviv_pm_domain {
 };
 
 struct etnaviv_pm_domain_meta {
+	unsigned int feature;
 	const struct etnaviv_pm_domain *domains;
 	u32 nr_domains;
 };
@@ -388,36 +390,78 @@ static const struct etnaviv_pm_domain do
 
 static const struct etnaviv_pm_domain_meta doms_meta[] = {
 	{
+		.feature = chipFeatures_PIPE_3D,
 		.nr_domains = ARRAY_SIZE(doms_3d),
 		.domains = &doms_3d[0]
 	},
 	{
+		.feature = chipFeatures_PIPE_2D,
 		.nr_domains = ARRAY_SIZE(doms_2d),
 		.domains = &doms_2d[0]
 	},
 	{
+		.feature = chipFeatures_PIPE_VG,
 		.nr_domains = ARRAY_SIZE(doms_vg),
 		.domains = &doms_vg[0]
 	}
 };
 
+static unsigned int num_pm_domains(const struct etnaviv_gpu *gpu)
+{
+	unsigned int num = 0, i;
+
+	for (i = 0; i < ARRAY_SIZE(doms_meta); i++) {
+		const struct etnaviv_pm_domain_meta *meta = &doms_meta[i];
+
+		if (gpu->identity.features & meta->feature)
+			num += meta->nr_domains;
+	}
+
+	return num;
+}
+
+static const struct etnaviv_pm_domain *pm_domain(const struct etnaviv_gpu *gpu,
+	unsigned int index)
+{
+	const struct etnaviv_pm_domain *domain = NULL;
+	unsigned int offset = 0, i;
+
+	for (i = 0; i < ARRAY_SIZE(doms_meta); i++) {
+		const struct etnaviv_pm_domain_meta *meta = &doms_meta[i];
+
+		if (!(gpu->identity.features & meta->feature))
+			continue;
+
+		if (meta->nr_domains < (index - offset)) {
+			offset += meta->nr_domains;
+			continue;
+		}
+
+		domain = meta->domains + (index - offset);
+	}
+
+	return domain;
+}
+
 int etnaviv_pm_query_dom(struct etnaviv_gpu *gpu,
 	struct drm_etnaviv_pm_domain *domain)
 {
-	const struct etnaviv_pm_domain_meta *meta = &doms_meta[domain->pipe];
+	const unsigned int nr_domains = num_pm_domains(gpu);
 	const struct etnaviv_pm_domain *dom;
 
-	if (domain->iter >= meta->nr_domains)
+	if (domain->iter >= nr_domains)
 		return -EINVAL;
 
-	dom = meta->domains + domain->iter;
+	dom = pm_domain(gpu, domain->iter);
+	if (!dom)
+		return -EINVAL;
 
 	domain->id = domain->iter;
 	domain->nr_signals = dom->nr_signals;
 	strncpy(domain->name, dom->name, sizeof(domain->name));
 
 	domain->iter++;
-	if (domain->iter == meta->nr_domains)
+	if (domain->iter == nr_domains)
 		domain->iter = 0xff;
 
 	return 0;
@@ -426,14 +470,16 @@ int etnaviv_pm_query_dom(struct etnaviv_
 int etnaviv_pm_query_sig(struct etnaviv_gpu *gpu,
 	struct drm_etnaviv_pm_signal *signal)
 {
-	const struct etnaviv_pm_domain_meta *meta = &doms_meta[signal->pipe];
+	const unsigned int nr_domains = num_pm_domains(gpu);
 	const struct etnaviv_pm_domain *dom;
 	const struct etnaviv_pm_signal *sig;
 
-	if (signal->domain >= meta->nr_domains)
+	if (signal->domain >= nr_domains)
 		return -EINVAL;
 
-	dom = meta->domains + signal->domain;
+	dom = pm_domain(gpu, signal->domain);
+	if (!dom)
+		return -EINVAL;
 
 	if (signal->iter >= dom->nr_signals)
 		return -EINVAL;

[PATCH 4.19 109/146] powerpc/pseries: Avoid NULL pointer dereference when drmem is unavailable

[Greg Kroah-Hartman]

From: Libor Pechacek <lpechacek@suse.cz>

commit a83836dbc53e96f13fec248ecc201d18e1e3111d upstream.

In guests without hotplugagble memory drmem structure is only zero
initialized. Trying to manipulate DLPAR parameters results in a crash.

  $ echo "memory add count 1" > /sys/kernel/dlpar
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  ...
  NIP:  c0000000000ff294 LR: c0000000000ff248 CTR: 0000000000000000
  REGS: c0000000fb9d3880 TRAP: 0300   Tainted: G            E      (5.5.0-rc6-2-default)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 28242428  XER: 20000000
  CFAR: c0000000009a6c10 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0
  ...
  NIP dlpar_memory+0x6e4/0xd00
  LR  dlpar_memory+0x698/0xd00
  Call Trace:
    dlpar_memory+0x698/0xd00 (unreliable)
    handle_dlpar_errorlog+0xc0/0x190
    dlpar_store+0x198/0x4a0
    kobj_attr_store+0x30/0x50
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    __vfs_write+0x3c/0x70
    vfs_write+0xd0/0x260
    ksys_write+0xdc/0x130
    system_call+0x5c/0x68

Taking closer look at the code, I can see that for_each_drmem_lmb is a
macro expanding into `for (lmb = &drmem_info->lmbs[0]; lmb <=
&drmem_info->lmbs[drmem_info->n_lmbs - 1]; lmb++)`. When drmem_info->lmbs
is NULL, the loop would iterate through the whole address range if it
weren't stopped by the NULL pointer dereference on the next line.

This patch aligns for_each_drmem_lmb and for_each_drmem_lmb_in_range
macro behavior with the common C semantics, where the end marker does
not belong to the scanned range, and alters get_lmb_range() semantics.
As a side effect, the wraparound observed in the crash is prevented.

Fixes: 6c6ea53725b3 ("powerpc/mm: Separate ibm, dynamic-memory data from DT format")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200131132829.10281-1-msuchanek@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/drmem.h                |    4 ++--
 arch/powerpc/platforms/pseries/hotplug-memory.c |    8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

--- a/arch/powerpc/include/asm/drmem.h
+++ b/arch/powerpc/include/asm/drmem.h
@@ -28,12 +28,12 @@ struct drmem_lmb_info {
 extern struct drmem_lmb_info *drmem_info;
 
 #define for_each_drmem_lmb_in_range(lmb, start, end)		\
-	for ((lmb) = (start); (lmb) <= (end); (lmb)++)
+	for ((lmb) = (start); (lmb) < (end); (lmb)++)
 
 #define for_each_drmem_lmb(lmb)					\
 	for_each_drmem_lmb_in_range((lmb),			\
 		&drmem_info->lmbs[0],				\
-		&drmem_info->lmbs[drmem_info->n_lmbs - 1])
+		&drmem_info->lmbs[drmem_info->n_lmbs])
 
 /*
  * The of_drconf_cell_v1 struct defines the layout of the LMB data
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -227,7 +227,7 @@ static int get_lmb_range(u32 drc_index,
 			 struct drmem_lmb **end_lmb)
 {
 	struct drmem_lmb *lmb, *start, *end;
-	struct drmem_lmb *last_lmb;
+	struct drmem_lmb *limit;
 
 	start = NULL;
 	for_each_drmem_lmb(lmb) {
@@ -240,10 +240,10 @@ static int get_lmb_range(u32 drc_index,
 	if (!start)
 		return -EINVAL;
 
-	end = &start[n_lmbs - 1];
+	end = &start[n_lmbs];
 
-	last_lmb = &drmem_info->lmbs[drmem_info->n_lmbs - 1];
-	if (end > last_lmb)
+	limit = &drmem_info->lmbs[drmem_info->n_lmbs];
+	if (end > limit)
 		return -EINVAL;
 
 	*start_lmb = start;

[PATCH 4.19 110/146] NFS: Fix a page leak in nfs_destroy_unlinked_subrequests()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit add42de31721fa29ed77a7ce388674d69f9d31a4 upstream.

When we detach a subrequest from the list, we must also release the
reference it holds to the parent.

Fixes: 5b2b5187fa85 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/write.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -432,6 +432,7 @@ nfs_destroy_unlinked_subrequests(struct
 		}
 
 		subreq->wb_head = subreq;
+		nfs_release_request(old_head);
 
 		if (test_and_clear_bit(PG_INODE_REF, &subreq->wb_flags)) {
 			nfs_release_request(subreq);

[PATCH 4.19 111/146] ext4: fix a data race at inode->i_blocks

[Greg Kroah-Hartman]

From: Qian Cai <cai@lca.pw>

commit 28936b62e71e41600bab319f262ea9f9b1027629 upstream.

inode->i_blocks could be accessed concurrently as noticed by KCSAN,

 BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes

 write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118:
  inode_add_bytes+0x65/0xf0
  __inode_add_bytes at fs/stat.c:689
  (inlined by) inode_add_bytes at fs/stat.c:702
  ext4_mb_new_blocks+0x418/0xca0 [ext4]
  ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4]
  ext4_map_blocks+0x1a9/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block_unwritten+0x33/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  ext4_da_write_begin+0x35f/0x8f0 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65:
  ext4_do_update_inode+0x4a0/0xf60 [ext4]
  ext4_inode_blocks_set at fs/ext4/inode.c:4815
  ext4_mark_iloc_dirty+0xaf/0x160 [ext4]
  ext4_mark_inode_dirty+0x129/0x3e0 [ext4]
  ext4_convert_unwritten_extents+0x253/0x2d0 [ext4]
  ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4]
  ext4_end_io_rsv_work+0x22c/0x350 [ext4]
  process_one_work+0x54f/0xb90
  worker_thread+0x80/0x5f0
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 4 locks held by kworker/u256:0/8:
  #0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90
  #1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90
  #2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4]
 irq event stamp: 3009267
 hardirqs last  enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ #7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4]

The plain read is outside of inode->i_lock critical section which
results in a data race. Fix it by adding READ_ONCE() there.

Link: https://lore.kernel.org/r/20200222043258.2279-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/inode.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5140,7 +5140,7 @@ static int ext4_inode_blocks_set(handle_
 				struct ext4_inode_info *ei)
 {
 	struct inode *inode = &(ei->vfs_inode);
-	u64 i_blocks = inode->i_blocks;
+	u64 i_blocks = READ_ONCE(inode->i_blocks);
 	struct super_block *sb = inode->i_sb;
 
 	if (i_blocks <= ~0U) {

[PATCH 4.19 112/146] fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 26c5d78c976ca298e59a56f6101a97b618ba3539 upstream.

After request_module(), nothing is stopping the module from being
unloaded until someone takes a reference to it via try_get_module().

The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace
running 'rmmod' concurrently.

Since WARN_ONCE() is for kernel bugs only, not for user-reachable
situations, downgrade this warning to pr_warn_once().

Keep it printed once only, since the intent of this warning is to detect
a bug in modprobe at boot time.  Printing the warning more than once
wouldn't really provide any useful extra information.

Fixes: 41124db869b7 ("fs: warn in case userspace lied about modprobe return")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org>		[4.13+]
Link: http://lkml.kernel.org/r/20200312202552.241885-3-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/filesystems.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -267,7 +267,9 @@ struct file_system_type *get_fs_type(con
 	fs = __get_fs_type(name, len);
 	if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
 		fs = __get_fs_type(name, len);
-		WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
+		if (!fs)
+			pr_warn_once("request_module fs-%.*s succeeded, but still no fs?\n",
+				     len, name);
 	}
 
 	if (dot && fs && !(fs->fs_flags & FS_HAS_SUBTYPE)) {

[PATCH 4.19 113/146] ocfs2: no need try to truncate file beyond i_size

[Greg Kroah-Hartman]

From: Changwei Ge <chge@linux.alibaba.com>

commit 783fda856e1034dee90a873f7654c418212d12d7 upstream.

Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can
exceed the inode size.  Ocfs2 now doesn't allow that offset beyond inode
size.  This restriction is not necessary and violates fallocate(2)
semantics.

If fallocate(2) offset is beyond inode size, just return success and do
nothing further.

Otherwise, ocfs2 will crash the kernel.

  kernel BUG at fs/ocfs2//alloc.c:7264!
   ocfs2_truncate_inline+0x20f/0x360 [ocfs2]
   ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2]
   __ocfs2_change_file_space+0x4a5/0x650 [ocfs2]
   ocfs2_fallocate+0x83/0xa0 [ocfs2]
   vfs_fallocate+0x148/0x230
   SyS_fallocate+0x48/0x80
   do_syscall_64+0x79/0x170

Signed-off-by: Changwei Ge <chge@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ocfs2/alloc.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -7403,6 +7403,10 @@ int ocfs2_truncate_inline(struct inode *
 	struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
 	struct ocfs2_inline_data *idata = &di->id2.i_data;
 
+	/* No need to punch hole beyond i_size. */
+	if (start >= i_size_read(inode))
+		return 0;
+
 	if (end > i_size_read(inode))
 		end = i_size_read(inode);
 

[PATCH 4.19 114/146] perf tools: Support Python 3.8+ in Makefile

[Greg Kroah-Hartman]

From: Sam Lunt <samueljlunt@gmail.com>

commit b9c9ce4e598e012ca7c1813fae2f4d02395807de upstream.

Python 3.8 changed the output of 'python-config --ldflags' to no longer
include the '-lpythonX.Y' flag (this apparently fixed an issue loading
modules with a statically linked Python executable).  The libpython
feature check in linux/build/feature fails if the Python library is not
included in FEATURE_CHECK_LDFLAGS-libpython variable.

This adds a check in the Makefile to determine if PYTHON_CONFIG accepts
the '--embed' flag and passes that flag alongside '--ldflags' if so.

tools/perf is the only place the libpython feature check is used.

Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com>
Tested-by: He Zhe <zhe.he@windriver.com>
Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/Makefile.config |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -205,8 +205,17 @@ strip-libs  = $(filter-out -l%,$(1))
 
 PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
 
+# Python 3.8 changed the output of `python-config --ldflags` to not include the
+# '-lpythonX.Y' flag unless '--embed' is also passed. The feature check for
+# libpython fails if that flag is not included in LDFLAGS
+ifeq ($(shell $(PYTHON_CONFIG_SQ) --ldflags --embed 2>&1 1>/dev/null; echo $$?), 0)
+  PYTHON_CONFIG_LDFLAGS := --ldflags --embed
+else
+  PYTHON_CONFIG_LDFLAGS := --ldflags
+endif
+
 ifdef PYTHON_CONFIG
-  PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
+  PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) $(PYTHON_CONFIG_LDFLAGS) 2>/dev/null)
   PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
   PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil
   PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --includes 2>/dev/null)

[PATCH 4.19 115/146] s390/diag: fix display of diagnose call statistics

[Greg Kroah-Hartman]

From: Michael Mueller <mimu@linux.ibm.com>

commit 6c7c851f1b666a8a455678a0b480b9162de86052 upstream.

Show the full diag statistic table and not just parts of it.

The issue surfaced in a KVM guest with a number of vcpus
defined smaller than NR_DIAG_STAT.

Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kernel/diag.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/s390/kernel/diag.c
+++ b/arch/s390/kernel/diag.c
@@ -79,7 +79,7 @@ static int show_diag_stat(struct seq_fil
 
 static void *show_diag_stat_start(struct seq_file *m, loff_t *pos)
 {
-	return *pos <= nr_cpu_ids ? (void *)((unsigned long) *pos + 1) : NULL;
+	return *pos <= NR_DIAG_STAT ? (void *)((unsigned long) *pos + 1) : NULL;
 }
 
 static void *show_diag_stat_next(struct seq_file *m, void *v, loff_t *pos)

[PATCH 4.19 116/146] Input: i8042 - add Acer Aspire 5738z to nomux list

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit ebc68cedec4aead47d8d11623d013cca9bf8e825 upstream.

The Acer Aspire 5738z has a button to disable (and re-enable) the
touchpad next to the touchpad.

When this button is pressed a LED underneath indicates that the touchpad
is disabled (and an event is send to userspace and GNOME shows its
touchpad enabled / disable OSD thingie).

So far so good, but after re-enabling the touchpad it no longer works.

The laptop does not have an external ps2 port, so mux mode is not needed
and disabling mux mode fixes the touchpad no longer working after toggling
it off and back on again, so lets add this laptop model to the nomux list.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/serio/i8042-x86ia64io.h |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -534,6 +534,17 @@ static const struct dmi_system_id __init
 			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"),
 		},
 	},
+	{
+		/*
+		 * Acer Aspire 5738z
+		 * Touchpad stops working in mux mode when dis- + re-enabled
+		 * with the touchpad enable/disable toggle hotkey
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
+		},
+	},
 	{ }
 };
 

[PATCH 4.19 117/146] clk: ingenic/jz4770: Exit with error if CGU init failed

[Greg Kroah-Hartman]

From: Paul Cercueil <paul@crapouillou.net>

commit c067b46d731a764fc46ecc466c2967088c97089e upstream.

Exit jz4770_cgu_init() if the 'cgu' pointer we get is NULL, since the
pointer is passed as argument to functions later on.

Fixes: 7a01c19007ad ("clk: Add Ingenic jz4770 CGU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lkml.kernel.org/r/20200213161952.37460-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/ingenic/jz4770-cgu.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -436,8 +436,10 @@ static void __init jz4770_cgu_init(struc
 
 	cgu = ingenic_cgu_new(jz4770_cgu_clocks,
 			      ARRAY_SIZE(jz4770_cgu_clocks), np);
-	if (!cgu)
+	if (!cgu) {
 		pr_err("%s: failed to initialise CGU\n", __func__);
+		return;
+	}
 
 	retval = ingenic_cgu_register_clocks(cgu);
 	if (retval)

[PATCH 4.19 118/146] kmod: make request_module() return an error when autoloading is disabled

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit d7d27cfc5cf0766a26a8f56868c5ad5434735126 upstream.

Patch series "module autoloading fixes and cleanups", v5.

This series fixes a bug where request_module() was reporting success to
kernel code when module autoloading had been completely disabled via
'echo > /proc/sys/kernel/modprobe'.

It also addresses the issues raised on the original thread
(https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u)
bydocumenting the modprobe sysctl, adding a self-test for the empty path
case, and downgrading a user-reachable WARN_ONCE().

This patch (of 4):

It's long been possible to disable kernel module autoloading completely
(while still allowing manual module insertion) by setting
/proc/sys/kernel/modprobe to the empty string.

This can be preferable to setting it to a nonexistent file since it
avoids the overhead of an attempted execve(), avoids potential
deadlocks, and avoids the call to security_kernel_module_request() and
thus on SELinux-based systems eliminates the need to write SELinux rules
to dontaudit module_request.

However, when module autoloading is disabled in this way,
request_module() returns 0.  This is broken because callers expect 0 to
mean that the module was successfully loaded.

Apparently this was never noticed because this method of disabling
module autoloading isn't used much, and also most callers don't use the
return value of request_module() since it's always necessary to check
whether the module registered its functionality or not anyway.

But improperly returning 0 can indeed confuse a few callers, for example
get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit:

	if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
		fs = __get_fs_type(name, len);
		WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
	}

This is easily reproduced with:

	echo > /proc/sys/kernel/modprobe
	mount -t NONEXISTENT none /

It causes:

	request_module fs-NONEXISTENT succeeded, but still no fs?
	WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0
	[...]

This should actually use pr_warn_once() rather than WARN_ONCE(), since
it's also user-reachable if userspace immediately unloads the module.
Regardless, request_module() should correctly return an error when it
fails.  So let's make it return -ENOENT, which matches the error when
the modprobe binary doesn't exist.

I've also sent patches to document and test this case.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Ben Hutchings <benh@debian.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org
Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/kmod.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -120,7 +120,7 @@ out:
  * invoke it.
  *
  * If module auto-loading support is disabled then this function
- * becomes a no-operation.
+ * simply returns -ENOENT.
  */
 int __request_module(bool wait, const char *fmt, ...)
 {
@@ -137,7 +137,7 @@ int __request_module(bool wait, const ch
 	WARN_ON_ONCE(wait && current_is_async());
 
 	if (!modprobe_path[0])
-		return 0;
+		return -ENOENT;
 
 	va_start(args, fmt);
 	ret = vsnprintf(module_name, MODULE_NAME_LEN, fmt, args);

[PATCH 4.19 119/146] cpufreq: powernv: Fix use-after-free

[Greg Kroah-Hartman]

From: Oliver O'Halloran <oohall@gmail.com>

commit d0a72efac89d1c35ac55197895201b7b94c5e6ef upstream.

The cpufreq driver has a use-after-free that we can hit if:

a) There's an OCC message pending when the notifier is registered, and
b) The cpufreq driver fails to register with the core.

When a) occurs the notifier schedules a workqueue item to handle the
message. The backing work_struct is located on chips[].throttle and
when b) happens we clean up by freeing the array. Once we get to
the (now free) queued item and the kernel crashes.

Fixes: c5e29ea7ac14 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200206062622.28235-1-oohall@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/powernv-cpufreq.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -1081,6 +1081,12 @@ free_and_return:
 
 static inline void clean_chip_info(void)
 {
+	int i;
+
+	/* flush any pending work items */
+	if (chips)
+		for (i = 0; i < nr_chips; i++)
+			cancel_work_sync(&chips[i].throttle);
 	kfree(chips);
 }
 

[PATCH 4.19 120/146] hfsplus: fix crash and filesystem corruption when deleting files

[Greg Kroah-Hartman]

From: Simon Gander <simon@tuxera.com>

commit 25efb2ffdf991177e740b2f63e92b4ec7d310a92 upstream.

When removing files containing extended attributes, the hfsplus driver may
remove the wrong entries from the attributes b-tree, causing major
filesystem damage and in some cases even kernel crashes.

To remove a file, all its extended attributes have to be removed as well.
The driver does this by looking up all keys in the attributes b-tree with
the cnid of the file.  Each of these entries then gets deleted using the
key used for searching, which doesn't contain the attribute's name when it
should.  Since the key doesn't contain the name, the deletion routine will
not find the correct entry and instead remove the one in front of it.  If
parent nodes have to be modified, these become corrupt as well.  This
causes invalid links and unsorted entries that not even macOS's fsck_hfs
is able to fix.

To fix this, modify the search key before an entry is deleted from the
attributes b-tree by copying the found entry's key into the search key,
therefore ensuring that the correct entry gets removed from the tree.

Signed-off-by: Simon Gander <simon@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/hfsplus/attributes.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/hfsplus/attributes.c
+++ b/fs/hfsplus/attributes.c
@@ -292,6 +292,10 @@ static int __hfsplus_delete_attr(struct
 		return -ENOENT;
 	}
 
+	/* Avoid btree corruption */
+	hfs_bnode_read(fd->bnode, fd->search_key,
+			fd->keyoffset, fd->keylength);
+
 	err = hfs_brec_remove(fd);
 	if (err)
 		return err;

[PATCH 4.19 121/146] libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit 8305f72f952cff21ce8109dc1ea4b321c8efc5af upstream.

During system resume from suspend, this can be observed on ASM1062 PMP
controller:

ata10.01: SATA link down (SStatus 0 SControl 330)
ata10.02: hard resetting link
ata10.02: SATA link down (SStatus 0 SControl 330)
ata10.00: configured for UDMA/133
Kernel panic - not syncing: stack-protector: Kernel
 in: sata_pmp_eh_recover+0xa2b/0xa40

CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE
#49-Ubuntu
Hardware name: System manufacturer System Product
 1001 12/10/2017
Call Trace:
dump_stack+0x63/0x8b
panic+0xe4/0x244
? sata_pmp_eh_recover+0xa2b/0xa40
__stack_chk_fail+0x19/0x20
sata_pmp_eh_recover+0xa2b/0xa40
? ahci_do_softreset+0x260/0x260 [libahci]
? ahci_do_hardreset+0x140/0x140 [libahci]
? ata_phys_link_offline+0x60/0x60
? ahci_stop_engine+0xc0/0xc0 [libahci]
sata_pmp_error_handler+0x22/0x30
ahci_error_handler+0x45/0x80 [libahci]
ata_scsi_port_error_handler+0x29b/0x770
? ata_scsi_cmd_error_handler+0x101/0x140
ata_scsi_error+0x95/0xd0
? scsi_try_target_reset+0x90/0x90
scsi_error_handler+0xd0/0x5b0
kthread+0x121/0x140
? scsi_eh_get_sense+0x200/0x200
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x40
Kernel Offset: 0xcc00000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is
set, sata_pmp_eh_recover() continues to run. During retry it triggers
the stack protector.

Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover()
jump to pmp_fail directly.

BugLink: https://bugs.launchpad.net/bugs/1821434
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-pmp.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -764,6 +764,7 @@ static int sata_pmp_eh_recover_pmp(struc
 
 	if (dev->flags & ATA_DFLAG_DETACH) {
 		detach = 1;
+		rc = -ENODEV;
 		goto fail;
 	}
 

[PATCH 4.19 122/146] ipmi: fix hung processes in __get_guid()

[Greg Kroah-Hartman]

From: Wen Yang <wenyang@linux.alibaba.com>

commit 32830a0534700f86366f371b150b17f0f0d140d7 upstream.

The wait_event() function is used to detect command completion.
When send_guid_cmd() returns an error, smi_send() has not been
called to send data. Therefore, wait_event() should not be used
on the error path, otherwise it will cause the following warning:

[ 1361.588808] systemd-udevd   D    0  1501   1436 0x00000004
[ 1361.588813]  ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40
[ 1361.677952]  ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010
[ 1361.767077]  00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000
[ 1361.856199] Call Trace:
[ 1361.885578]  [<ffffffff8173ca3b>] ? __schedule+0x23b/0x780
[ 1361.951406]  [<ffffffff8173cfb6>] schedule+0x36/0x80
[ 1362.010979]  [<ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler]
[ 1362.091281]  [<ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100
[ 1362.168533]  [<ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler]
[ 1362.258337]  [<ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si]
[ 1362.334521]  [<ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si]
[ 1362.411701]  [<ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si]
[ 1362.487917]  [<ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si]
[ 1362.568219]  [<ffffffff810021a0>] do_one_initcall+0x50/0x180
[ 1362.636109]  [<ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190
[ 1362.714330]  [<ffffffff811b2ae1>] do_init_module+0x5f/0x200
[ 1362.781208]  [<ffffffff81123ca8>] load_module+0x1898/0x1de0
[ 1362.848069]  [<ffffffff811202e0>] ? __symbol_put+0x60/0x60
[ 1362.913886]  [<ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80
[ 1362.998514]  [<ffffffff81124465>] SYSC_finit_module+0xe5/0x120
[ 1363.068463]  [<ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120
[ 1363.140513]  [<ffffffff811244be>] SyS_finit_module+0xe/0x10
[ 1363.207364]  [<ffffffff81003c04>] do_syscall_64+0x74/0x180

Fixes: 50c812b2b951 ("[PATCH] ipmi: add full sysfs support")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 2.6.17-
Message-Id: <20200403090408.58745-1-wenyang@linux.alibaba.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/ipmi/ipmi_msghandler.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -3134,8 +3134,8 @@ static void __get_guid(struct ipmi_smi *
 	if (rv)
 		/* Send failed, no GUID available. */
 		bmc->dyn_guid_set = 0;
-
-	wait_event(intf->waitq, bmc->dyn_guid_set != 2);
+	else
+		wait_event(intf->waitq, bmc->dyn_guid_set != 2);
 
 	/* dyn_guid_set makes the guid data available. */
 	smp_rmb();

[PATCH 4.19 123/146] xen/blkfront: fix memory allocation flags in blkfront_setup_indirect()

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit 3a169c0be75b59dd85d159493634870cdec6d3c4 upstream.

Commit 1d5c76e664333 ("xen-blkfront: switch kcalloc to kvcalloc for
large array allocation") didn't fix the issue it was meant to, as the
flags for allocating the memory are GFP_NOIO, which will lead the
memory allocation falling back to kmalloc().

So instead of GFP_NOIO use GFP_KERNEL and do all the memory allocation
in blkfront_setup_indirect() in a memalloc_noio_{save,restore} section.

Fixes: 1d5c76e664333 ("xen-blkfront: switch kcalloc to kvcalloc for large array allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20200403090034.8753-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/xen-blkfront.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -47,6 +47,7 @@
 #include <linux/bitmap.h>
 #include <linux/list.h>
 #include <linux/workqueue.h>
+#include <linux/sched/mm.h>
 
 #include <xen/xen.h>
 #include <xen/xenbus.h>
@@ -2188,10 +2189,12 @@ static void blkfront_setup_discard(struc
 
 static int blkfront_setup_indirect(struct blkfront_ring_info *rinfo)
 {
-	unsigned int psegs, grants;
+	unsigned int psegs, grants, memflags;
 	int err, i;
 	struct blkfront_info *info = rinfo->dev_info;
 
+	memflags = memalloc_noio_save();
+
 	if (info->max_indirect_segments == 0) {
 		if (!HAS_EXTRA_REQ)
 			grants = BLKIF_MAX_SEGMENTS_PER_REQUEST;
@@ -2223,7 +2226,7 @@ static int blkfront_setup_indirect(struc
 
 		BUG_ON(!list_empty(&rinfo->indirect_pages));
 		for (i = 0; i < num; i++) {
-			struct page *indirect_page = alloc_page(GFP_NOIO);
+			struct page *indirect_page = alloc_page(GFP_KERNEL);
 			if (!indirect_page)
 				goto out_of_memory;
 			list_add(&indirect_page->lru, &rinfo->indirect_pages);
@@ -2234,15 +2237,15 @@ static int blkfront_setup_indirect(struc
 		rinfo->shadow[i].grants_used =
 			kvcalloc(grants,
 				 sizeof(rinfo->shadow[i].grants_used[0]),
-				 GFP_NOIO);
+				 GFP_KERNEL);
 		rinfo->shadow[i].sg = kvcalloc(psegs,
 					       sizeof(rinfo->shadow[i].sg[0]),
-					       GFP_NOIO);
+					       GFP_KERNEL);
 		if (info->max_indirect_segments)
 			rinfo->shadow[i].indirect_grants =
 				kvcalloc(INDIRECT_GREFS(grants),
 					 sizeof(rinfo->shadow[i].indirect_grants[0]),
-					 GFP_NOIO);
+					 GFP_KERNEL);
 		if ((rinfo->shadow[i].grants_used == NULL) ||
 			(rinfo->shadow[i].sg == NULL) ||
 		     (info->max_indirect_segments &&
@@ -2251,6 +2254,7 @@ static int blkfront_setup_indirect(struc
 		sg_init_table(rinfo->shadow[i].sg, psegs);
 	}
 
+	memalloc_noio_restore(memflags);
 
 	return 0;
 
@@ -2270,6 +2274,9 @@ out_of_memory:
 			__free_page(indirect_page);
 		}
 	}
+
+	memalloc_noio_restore(memflags);
+
 	return -ENOMEM;
 }
 

[PATCH 4.19 124/146] powerpc/powernv/idle: Restore AMR/UAMOR/AMOR after idle

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit 53a712bae5dd919521a58d7bad773b949358add0 upstream.

In order to implement KUAP (Kernel Userspace Access Protection) on
Power9 we will be using the AMR, and therefore indirectly the
UAMOR/AMOR.

So save/restore these regs in the idle code.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[ajd: Backport to 4.19 tree, CVE-2020-11669]
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/idle_book3s.S |   27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)

--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -170,8 +170,11 @@ core_idle_lock_held:
 	bne-	core_idle_lock_held
 	blr
 
-/* Reuse an unused pt_regs slot for IAMR */
+/* Reuse some unused pt_regs slots for AMR/IAMR/UAMOR/UAMOR */
+#define PNV_POWERSAVE_AMR	_TRAP
 #define PNV_POWERSAVE_IAMR	_DAR
+#define PNV_POWERSAVE_UAMOR	_DSISR
+#define PNV_POWERSAVE_AMOR	RESULT
 
 /*
  * Pass requested state in r3:
@@ -205,8 +208,16 @@ pnv_powersave_common:
 	SAVE_NVGPRS(r1)
 
 BEGIN_FTR_SECTION
+	mfspr	r4, SPRN_AMR
 	mfspr	r5, SPRN_IAMR
+	mfspr	r6, SPRN_UAMOR
+	std	r4, PNV_POWERSAVE_AMR(r1)
 	std	r5, PNV_POWERSAVE_IAMR(r1)
+	std	r6, PNV_POWERSAVE_UAMOR(r1)
+BEGIN_FTR_SECTION_NESTED(42)
+	mfspr	r7, SPRN_AMOR
+	std	r7, PNV_POWERSAVE_AMOR(r1)
+END_FTR_SECTION_NESTED_IFSET(CPU_FTR_HVMODE, 42)
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 
 	mfcr	r5
@@ -935,12 +946,20 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	REST_GPR(2, r1)
 
 BEGIN_FTR_SECTION
-	/* IAMR was saved in pnv_powersave_common() */
+	/* These regs were saved in pnv_powersave_common() */
+	ld	r4, PNV_POWERSAVE_AMR(r1)
 	ld	r5, PNV_POWERSAVE_IAMR(r1)
+	ld	r6, PNV_POWERSAVE_UAMOR(r1)
+	mtspr	SPRN_AMR, r4
 	mtspr	SPRN_IAMR, r5
+	mtspr	SPRN_UAMOR, r6
+BEGIN_FTR_SECTION_NESTED(42)
+	ld	r7, PNV_POWERSAVE_AMOR(r1)
+	mtspr	SPRN_AMOR, r7
+END_FTR_SECTION_NESTED_IFSET(CPU_FTR_HVMODE, 42)
 	/*
-	 * We don't need an isync here because the upcoming mtmsrd is
-	 * execution synchronizing.
+	 * We don't need an isync here after restoring IAMR because the upcoming
+	 * mtmsrd is execution synchronizing.
 	 */
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 

[PATCH 4.19 125/146] powerpc/64/tm: Dont let userspace set regs->trap via sigreturn

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit c7def7fbdeaa25feaa19caf4a27c5d10bd8789e4 upstream.

In restore_tm_sigcontexts() we take the trap value directly from the
user sigcontext with no checking:

	err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);

This means we can be in the kernel with an arbitrary regs->trap value.

Although that's not immediately problematic, there is a risk we could
trigger one of the uses of CHECK_FULL_REGS():

	#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)

It can also cause us to unnecessarily save non-volatile GPRs again in
save_nvgprs(), which shouldn't be problematic but is still wrong.

It's also possible it could trick the syscall restart machinery, which
relies on regs->trap not being == 0xc00 (see 9a81c16b5275 ("powerpc:
fix double syscall restarts")), though I haven't been able to make
that happen.

Finally it doesn't match the behaviour of the non-TM case, in
restore_sigcontext() which zeroes regs->trap.

So change restore_tm_sigcontexts() to zero regs->trap.

This was discovered while testing Nick's upcoming rewrite of the
syscall entry path. In that series the call to save_nvgprs() prior to
signal handling (do_notify_resume()) is removed, which leaves the
low-bit of regs->trap uncleared which can then trigger the FULL_REGS()
WARNs in setup_tm_sigcontexts().

Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200401023836.3286664-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/signal_64.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -477,8 +477,10 @@ static long restore_tm_sigcontexts(struc
 	err |= __get_user(tsk->thread.ckpt_regs.ccr,
 			  &sc->gp_regs[PT_CCR]);
 
+	/* Don't allow userspace to set the trap value */
+	regs->trap = 0;
+
 	/* These regs are not checkpointed; they can go in 'regs'. */
-	err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);
 	err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]);
 	err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]);
 	err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);

[PATCH 4.19 126/146] powerpc/hash64/devmap: Use H_PAGE_THP_HUGE when setting up huge devmap PTE entries

[Greg Kroah-Hartman]

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

commit 36b78402d97a3b9aeab136feb9b00d8647ec2c20 upstream.

H_PAGE_THP_HUGE is used to differentiate between a THP hugepage and
hugetlb hugepage entries. The difference is WRT how we handle hash
fault on these address. THP address enables MPSS in segments. We want
to manage devmap hugepage entries similar to THP pt entries. Hence use
H_PAGE_THP_HUGE for devmap huge PTE entries.

With current code while handling hash PTE fault, we do set is_thp =
true when finding devmap PTE huge PTE entries.

Current code also does the below sequence we setting up huge devmap
entries.

	entry = pmd_mkhuge(pfn_t_pmd(pfn, prot));
	if (pfn_t_devmap(pfn))
		entry = pmd_mkdevmap(entry);

In that case we would find both H_PAGE_THP_HUGE and PAGE_DEVMAP set
for huge devmap PTE entries. This results in false positive error like
below.

  kernel BUG at /home/kvaneesh/src/linux/mm/memory.c:4321!
  Oops: Exception in kernel mode, sig: 5 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 56 PID: 67996 Comm: t_mmap_dio Not tainted 5.6.0-rc4-59640-g371c804dedbc #128
  ....
  NIP [c00000000044c9e4] __follow_pte_pmd+0x264/0x900
  LR [c0000000005d45f8] dax_writeback_one+0x1a8/0x740
  Call Trace:
    str_spec.74809+0x22ffb4/0x2d116c (unreliable)
    dax_writeback_one+0x1a8/0x740
    dax_writeback_mapping_range+0x26c/0x700
    ext4_dax_writepages+0x150/0x5a0
    do_writepages+0x68/0x180
    __filemap_fdatawrite_range+0x138/0x180
    file_write_and_wait_range+0xa4/0x110
    ext4_sync_file+0x370/0x6e0
    vfs_fsync_range+0x70/0xf0
    sys_msync+0x220/0x2e0
    system_call+0x5c/0x68

This is because our pmd_trans_huge check doesn't exclude _PAGE_DEVMAP.

To make this all consistent, update pmd_mkdevmap to set
H_PAGE_THP_HUGE and pmd_trans_huge check now excludes _PAGE_DEVMAP
correctly.

Fixes: ebd31197931d ("powerpc/mm: Add devmap support for ppc64")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200313094842.351830-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/book3s/64/hash-4k.h  |    6 ++++++
 arch/powerpc/include/asm/book3s/64/hash-64k.h |    8 +++++++-
 arch/powerpc/include/asm/book3s/64/pgtable.h  |    4 +++-
 arch/powerpc/include/asm/book3s/64/radix.h    |    5 +++++
 4 files changed, 21 insertions(+), 2 deletions(-)

--- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@@ -145,6 +145,12 @@ extern pmd_t hash__pmdp_huge_get_and_cle
 extern int hash__has_transparent_hugepage(void);
 #endif
 
+static inline pmd_t hash__pmd_mkdevmap(pmd_t pmd)
+{
+	BUG();
+	return pmd;
+}
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_BOOK3S_64_HASH_4K_H */
--- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -233,7 +233,7 @@ static inline void mark_hpte_slot_valid(
  */
 static inline int hash__pmd_trans_huge(pmd_t pmd)
 {
-	return !!((pmd_val(pmd) & (_PAGE_PTE | H_PAGE_THP_HUGE)) ==
+	return !!((pmd_val(pmd) & (_PAGE_PTE | H_PAGE_THP_HUGE | _PAGE_DEVMAP)) ==
 		  (_PAGE_PTE | H_PAGE_THP_HUGE));
 }
 
@@ -259,6 +259,12 @@ extern pmd_t hash__pmdp_huge_get_and_cle
 				       unsigned long addr, pmd_t *pmdp);
 extern int hash__has_transparent_hugepage(void);
 #endif /*  CONFIG_TRANSPARENT_HUGEPAGE */
+
+static inline pmd_t hash__pmd_mkdevmap(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) | (_PAGE_PTE | H_PAGE_THP_HUGE | _PAGE_DEVMAP));
+}
+
 #endif	/* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_BOOK3S_64_HASH_64K_H */
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -1253,7 +1253,9 @@ extern void serialize_against_pte_lookup
 
 static inline pmd_t pmd_mkdevmap(pmd_t pmd)
 {
-	return __pmd(pmd_val(pmd) | (_PAGE_PTE | _PAGE_DEVMAP));
+	if (radix_enabled())
+		return radix__pmd_mkdevmap(pmd);
+	return hash__pmd_mkdevmap(pmd);
 }
 
 static inline int pmd_devmap(pmd_t pmd)
--- a/arch/powerpc/include/asm/book3s/64/radix.h
+++ b/arch/powerpc/include/asm/book3s/64/radix.h
@@ -255,6 +255,11 @@ extern pmd_t radix__pmdp_huge_get_and_cl
 extern int radix__has_transparent_hugepage(void);
 #endif
 
+static inline pmd_t radix__pmd_mkdevmap(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) | (_PAGE_PTE | _PAGE_DEVMAP));
+}
+
 extern int __meminit radix__vmemmap_create_mapping(unsigned long start,
 					     unsigned long page_size,
 					     unsigned long phys);

[PATCH 4.19 127/146] powerpc/xive: Use XIVE_BAD_IRQ instead of zero to catch non configured IPIs

[Greg Kroah-Hartman]

From: Cédric Le Goater <clg@kaod.org>

commit b1a504a6500df50e83b701b7946b34fce27ad8a3 upstream.

When a CPU is brought up, an IPI number is allocated and recorded
under the XIVE CPU structure. Invalid IPI numbers are tracked with
interrupt number 0x0.

On the PowerNV platform, the interrupt number space starts at 0x10 and
this works fine. However, on the sPAPR platform, it is possible to
allocate the interrupt number 0x0 and this raises an issue when CPU 0
is unplugged. The XIVE spapr driver tracks allocated interrupt numbers
in a bitmask and it is not correctly updated when interrupt number 0x0
is freed. It stays allocated and it is then impossible to reallocate.

Fix by using the XIVE_BAD_IRQ value instead of zero on both platforms.

Reported-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306150143.5551-2-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/sysdev/xive/common.c        |   12 +++---------
 arch/powerpc/sysdev/xive/native.c        |    4 ++--
 arch/powerpc/sysdev/xive/spapr.c         |    4 ++--
 arch/powerpc/sysdev/xive/xive-internal.h |    7 +++++++
 4 files changed, 14 insertions(+), 13 deletions(-)

--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -72,13 +72,6 @@ static u32 xive_ipi_irq;
 /* Xive state for each CPU */
 static DEFINE_PER_CPU(struct xive_cpu *, xive_cpu);
 
-/*
- * A "disabled" interrupt should never fire, to catch problems
- * we set its logical number to this
- */
-#define XIVE_BAD_IRQ		0x7fffffff
-#define XIVE_MAX_IRQ		(XIVE_BAD_IRQ - 1)
-
 /* An invalid CPU target */
 #define XIVE_INVALID_TARGET	(-1)
 
@@ -1074,7 +1067,7 @@ static int xive_setup_cpu_ipi(unsigned i
 	xc = per_cpu(xive_cpu, cpu);
 
 	/* Check if we are already setup */
-	if (xc->hw_ipi != 0)
+	if (xc->hw_ipi != XIVE_BAD_IRQ)
 		return 0;
 
 	/* Grab an IPI from the backend, this will populate xc->hw_ipi */
@@ -1111,7 +1104,7 @@ static void xive_cleanup_cpu_ipi(unsigne
 	/* Disable the IPI and free the IRQ data */
 
 	/* Already cleaned up ? */
-	if (xc->hw_ipi == 0)
+	if (xc->hw_ipi == XIVE_BAD_IRQ)
 		return;
 
 	/* Mask the IPI */
@@ -1267,6 +1260,7 @@ static int xive_prepare_cpu(unsigned int
 		if (np)
 			xc->chip_id = of_get_ibm_chip_id(np);
 		of_node_put(np);
+		xc->hw_ipi = XIVE_BAD_IRQ;
 
 		per_cpu(xive_cpu, cpu) = xc;
 	}
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -311,7 +311,7 @@ static void xive_native_put_ipi(unsigned
 	s64 rc;
 
 	/* Free the IPI */
-	if (!xc->hw_ipi)
+	if (xc->hw_ipi == XIVE_BAD_IRQ)
 		return;
 	for (;;) {
 		rc = opal_xive_free_irq(xc->hw_ipi);
@@ -319,7 +319,7 @@ static void xive_native_put_ipi(unsigned
 			msleep(OPAL_BUSY_DELAY_MS);
 			continue;
 		}
-		xc->hw_ipi = 0;
+		xc->hw_ipi = XIVE_BAD_IRQ;
 		break;
 	}
 }
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -509,11 +509,11 @@ static int xive_spapr_get_ipi(unsigned i
 
 static void xive_spapr_put_ipi(unsigned int cpu, struct xive_cpu *xc)
 {
-	if (!xc->hw_ipi)
+	if (xc->hw_ipi == XIVE_BAD_IRQ)
 		return;
 
 	xive_irq_bitmap_free(xc->hw_ipi);
-	xc->hw_ipi = 0;
+	xc->hw_ipi = XIVE_BAD_IRQ;
 }
 #endif /* CONFIG_SMP */
 
--- a/arch/powerpc/sysdev/xive/xive-internal.h
+++ b/arch/powerpc/sysdev/xive/xive-internal.h
@@ -9,6 +9,13 @@
 #ifndef __XIVE_INTERNAL_H
 #define __XIVE_INTERNAL_H
 
+/*
+ * A "disabled" interrupt should never fire, to catch problems
+ * we set its logical number to this
+ */
+#define XIVE_BAD_IRQ		0x7fffffff
+#define XIVE_MAX_IRQ		(XIVE_BAD_IRQ - 1)
+
 /* Each CPU carry one of these with various per-CPU state */
 struct xive_cpu {
 #ifdef CONFIG_SMP

[PATCH 4.19 128/146] powerpc/kprobes: Ignore traps that happened in real mode

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 21f8b2fa3ca5b01f7a2b51b89ce97a3705a15aa0 upstream.

When a program check exception happens while MMU translation is
disabled, following Oops happens in kprobe_handler() in the following
code:

	} else if (*addr != BREAKPOINT_INSTRUCTION) {

  BUG: Unable to handle kernel data access on read at 0x0000e268
  Faulting instruction address: 0xc000ec34
  Oops: Kernel access of bad area, sig: 11 [#1]
  BE PAGE_SIZE=16K PREEMPT CMPC885
  Modules linked in:
  CPU: 0 PID: 429 Comm: cat Not tainted 5.6.0-rc1-s3k-dev-00824-g84195dc6c58a #3267
  NIP:  c000ec34 LR: c000ecd8 CTR: c019cab8
  REGS: ca4d3b58 TRAP: 0300   Not tainted  (5.6.0-rc1-s3k-dev-00824-g84195dc6c58a)
  MSR:  00001032 <ME,IR,DR,RI>  CR: 2a4d3c52  XER: 00000000
  DAR: 0000e268 DSISR: c0000000
  GPR00: c000b09c ca4d3c10 c66d0620 00000000 ca4d3c60 00000000 00009032 00000000
  GPR08: 00020000 00000000 c087de44 c000afe0 c66d0ad0 100d3dd6 fffffff3 00000000
  GPR16: 00000000 00000041 00000000 ca4d3d70 00000000 00000000 0000416d 00000000
  GPR24: 00000004 c53b6128 00000000 0000e268 00000000 c07c0000 c07bb6fc ca4d3c60
  NIP [c000ec34] kprobe_handler+0x128/0x290
  LR [c000ecd8] kprobe_handler+0x1cc/0x290
  Call Trace:
  [ca4d3c30] [c000b09c] program_check_exception+0xbc/0x6fc
  [ca4d3c50] [c000e43c] ret_from_except_full+0x0/0x4
  --- interrupt: 700 at 0xe268
  Instruction dump:
  913e0008 81220000 38600001 3929ffff 91220000 80010024 bb410008 7c0803a6
  38210020 4e800020 38600000 4e800020 <813b0000> 6d2a7fe0 2f8a0008 419e0154
  ---[ end trace 5b9152d4cdadd06d ]---

kprobe is not prepared to handle events in real mode and functions
running in real mode should have been blacklisted, so kprobe_handler()
can safely bail out telling 'this trap is not mine' for any trap that
happened while in real-mode.

If the trap happened with MSR_IR or MSR_DR cleared, return 0
immediately.

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Fixes: 6cc89bad60a6 ("powerpc/kprobes: Invoke handlers directly")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/424331e2006e7291a1bfe40e7f3fa58825f565e1.1582054578.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/kprobes.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -277,6 +277,9 @@ int kprobe_handler(struct pt_regs *regs)
 	if (user_mode(regs))
 		return 0;
 
+	if (!(regs->msr & MSR_IR) || !(regs->msr & MSR_DR))
+		return 0;
+
 	/*
 	 * We don't want to be preempted for the entire
 	 * duration of kprobe processing

[PATCH 4.19 129/146] scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug

[Greg Kroah-Hartman]

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>

commit cc41f11a21a51d6869d71e525a7264c748d7c0d7 upstream.

Generic protection fault type kernel panic is observed when user performs
soft (ordered) HBA unplug operation while IOs are running on drives
connected to HBA.

When user performs ordered HBA removal operation, the kernel calls PCI
device's .remove() call back function where driver is flushing out all the
outstanding SCSI IO commands with DID_NO_CONNECT host byte and also unmaps
sg buffers allocated for these IO commands.

However, in the ordered HBA removal case (unlike of real HBA hot removal),
HBA device is still alive and hence HBA hardware is performing the DMA
operations to those buffers on the system memory which are already unmapped
while flushing out the outstanding SCSI IO commands and this leads to
kernel panic.

Don't flush out the outstanding IOs from .remove() path in case of ordered
removal since HBA will be still alive in this case and it can complete the
outstanding IOs. Flush out the outstanding IOs only in case of 'physical
HBA hot unplug' where there won't be any communication with the HBA.

During shutdown also it is possible that HBA hardware can perform DMA
operations on those outstanding IO buffers which are completed with
DID_NO_CONNECT by the driver from .shutdown(). So same above fix is applied
in shutdown path as well.

It is safe to drop the outstanding commands when HBA is inaccessible such
as when permanent PCI failure happens, when HBA is in non-operational
state, or when someone does a real HBA hot unplug operation. Since driver
knows that HBA is inaccessible during these cases, it is safe to drop the
outstanding commands instead of waiting for SCSI error recovery to kick in
and clear these outstanding commands.

Link: https://lore.kernel.org/r/1585302763-23007-1-git-send-email-sreekanth.reddy@broadcom.com
Fixes: c666d3be99c0 ("scsi: mpt3sas: wait for and flush running commands on shutdown/unload")
Cc: stable@vger.kernel.org #v4.14.174+
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -9841,8 +9841,8 @@ static void scsih_remove(struct pci_dev
 
 	ioc->remove_host = 1;
 
-	mpt3sas_wait_for_commands_to_complete(ioc);
-	_scsih_flush_running_cmds(ioc);
+	if (!pci_device_is_present(pdev))
+		_scsih_flush_running_cmds(ioc);
 
 	_scsih_fw_event_cleanup_queue(ioc);
 
@@ -9919,8 +9919,8 @@ scsih_shutdown(struct pci_dev *pdev)
 
 	ioc->remove_host = 1;
 
-	mpt3sas_wait_for_commands_to_complete(ioc);
-	_scsih_flush_running_cmds(ioc);
+	if (!pci_device_is_present(pdev))
+		_scsih_flush_running_cmds(ioc);
 
 	_scsih_fw_event_cleanup_queue(ioc);
 

[PATCH 4.19 130/146] powerpc: Add attributes for setjmp/longjmp

[Greg Kroah-Hartman]

From: Segher Boessenkool <segher@kernel.crashing.org>

commit aa497d4352414aad22e792b35d0aaaa12bbc37c5 upstream.

The setjmp function should be declared as "returns_twice", or bad
things can happen[1]. This does not actually change generated code in
my testing.

The longjmp function should be declared as "noreturn", so that the
compiler can optimise calls to it better. This makes the generated
code a little shorter.

1: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-returns_005ftwice-function-attribute

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c02ce4a573f3bac907e2c70957a2d1275f910013.1567605586.git.segher@kernel.crashing.org
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/setjmp.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/powerpc/include/asm/setjmp.h
+++ b/arch/powerpc/include/asm/setjmp.h
@@ -12,7 +12,7 @@
 
 #define JMP_BUF_LEN    23
 
-extern long setjmp(long *);
-extern void longjmp(long *, long);
+extern long setjmp(long *) __attribute__((returns_twice));
+extern void longjmp(long *, long) __attribute__((noreturn));
 
 #endif /* _ASM_POWERPC_SETJMP_H */

[PATCH 4.19 131/146] powerpc: Make setjmp/longjmp signature standard

[Greg Kroah-Hartman]

From: Clement Courbet <courbet@google.com>

commit c17eb4dca5a353a9dbbb8ad6934fe57af7165e91 upstream.

Declaring setjmp()/longjmp() as taking longs makes the signature
non-standard, and makes clang complain. In the past, this has been
worked around by adding -ffreestanding to the compile flags.

The implementation looks like it only ever propagates the value
(in longjmp) or sets it to 1 (in setjmp), and we only call longjmp
with integer parameters.

This allows removing -ffreestanding from the compilation flags.

Fixes: c9029ef9c957 ("powerpc: Avoid clang warnings around setjmp and longjmp")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Clement Courbet <courbet@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200330080400.124803-1-courbet@google.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/setjmp.h |    6 ++++--
 arch/powerpc/kernel/Makefile      |    3 ---
 arch/powerpc/xmon/Makefile        |    3 ---
 3 files changed, 4 insertions(+), 8 deletions(-)

--- a/arch/powerpc/include/asm/setjmp.h
+++ b/arch/powerpc/include/asm/setjmp.h
@@ -12,7 +12,9 @@
 
 #define JMP_BUF_LEN    23
 
-extern long setjmp(long *) __attribute__((returns_twice));
-extern void longjmp(long *, long) __attribute__((noreturn));
+typedef long jmp_buf[JMP_BUF_LEN];
+
+extern int setjmp(jmp_buf env) __attribute__((returns_twice));
+extern void longjmp(jmp_buf env, int val) __attribute__((noreturn));
 
 #endif /* _ASM_POWERPC_SETJMP_H */
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -5,9 +5,6 @@
 
 CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
 
-# Avoid clang warnings around longjmp/setjmp declarations
-CFLAGS_crash.o += -ffreestanding
-
 subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
 
 ifdef CONFIG_PPC64
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -1,9 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for xmon
 
-# Avoid clang warnings around longjmp/setjmp declarations
-subdir-ccflags-y := -ffreestanding
-
 subdir-ccflags-$(CONFIG_PPC_WERROR) += -Werror
 
 GCOV_PROFILE := n

[PATCH 4.19 132/146] btrfs: use nofs allocations for running delayed items

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 351cbf6e4410e7ece05e35d0a07320538f2418b4 ]

Zygo reported the following lockdep splat while testing the balance
patches

======================================================
WARNING: possible circular locking dependency detected
5.6.0-c6f0579d496a+ #53 Not tainted
------------------------------------------------------
kswapd0/1133 is trying to acquire lock:
ffff888092f622c0 (&delayed_node->mutex){+.+.}, at: __btrfs_release_delayed_node+0x7c/0x5b0

but task is already holding lock:
ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (fs_reclaim){+.+.}:
       fs_reclaim_acquire.part.91+0x29/0x30
       fs_reclaim_acquire+0x19/0x20
       kmem_cache_alloc_trace+0x32/0x740
       add_block_entry+0x45/0x260
       btrfs_ref_tree_mod+0x6e2/0x8b0
       btrfs_alloc_tree_block+0x789/0x880
       alloc_tree_block_no_bg_flush+0xc6/0xf0
       __btrfs_cow_block+0x270/0x940
       btrfs_cow_block+0x1ba/0x3a0
       btrfs_search_slot+0x999/0x1030
       btrfs_insert_empty_items+0x81/0xe0
       btrfs_insert_delayed_items+0x128/0x7d0
       __btrfs_run_delayed_items+0xf4/0x2a0
       btrfs_run_delayed_items+0x13/0x20
       btrfs_commit_transaction+0x5cc/0x1390
       insert_balance_item.isra.39+0x6b2/0x6e0
       btrfs_balance+0x72d/0x18d0
       btrfs_ioctl_balance+0x3de/0x4c0
       btrfs_ioctl+0x30ab/0x44a0
       ksys_ioctl+0xa1/0xe0
       __x64_sys_ioctl+0x43/0x50
       do_syscall_64+0x77/0x2c0
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #0 (&delayed_node->mutex){+.+.}:
       __lock_acquire+0x197e/0x2550
       lock_acquire+0x103/0x220
       __mutex_lock+0x13d/0xce0
       mutex_lock_nested+0x1b/0x20
       __btrfs_release_delayed_node+0x7c/0x5b0
       btrfs_remove_delayed_node+0x49/0x50
       btrfs_evict_inode+0x6fc/0x900
       evict+0x19a/0x2c0
       dispose_list+0xa0/0xe0
       prune_icache_sb+0xbd/0xf0
       super_cache_scan+0x1b5/0x250
       do_shrink_slab+0x1f6/0x530
       shrink_slab+0x32e/0x410
       shrink_node+0x2a5/0xba0
       balance_pgdat+0x4bd/0x8a0
       kswapd+0x35a/0x800
       kthread+0x1e9/0x210
       ret_from_fork+0x3a/0x50

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(fs_reclaim);
                               lock(&delayed_node->mutex);
                               lock(fs_reclaim);
  lock(&delayed_node->mutex);

 *** DEADLOCK ***

3 locks held by kswapd0/1133:
 #0: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30
 #1: ffffffff8fc380d8 (shrinker_rwsem){++++}, at: shrink_slab+0x1e8/0x410
 #2: ffff8881e0e6c0e8 (&type->s_umount_key#42){++++}, at: trylock_super+0x1b/0x70

stack backtrace:
CPU: 2 PID: 1133 Comm: kswapd0 Not tainted 5.6.0-c6f0579d496a+ #53
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
 dump_stack+0xc1/0x11a
 print_circular_bug.isra.38.cold.57+0x145/0x14a
 check_noncircular+0x2a9/0x2f0
 ? print_circular_bug.isra.38+0x130/0x130
 ? stack_trace_consume_entry+0x90/0x90
 ? save_trace+0x3cc/0x420
 __lock_acquire+0x197e/0x2550
 ? btrfs_inode_clear_file_extent_range+0x9b/0xb0
 ? register_lock_class+0x960/0x960
 lock_acquire+0x103/0x220
 ? __btrfs_release_delayed_node+0x7c/0x5b0
 __mutex_lock+0x13d/0xce0
 ? __btrfs_release_delayed_node+0x7c/0x5b0
 ? __asan_loadN+0xf/0x20
 ? pvclock_clocksource_read+0xeb/0x190
 ? __btrfs_release_delayed_node+0x7c/0x5b0
 ? mutex_lock_io_nested+0xc20/0xc20
 ? __kasan_check_read+0x11/0x20
 ? check_chain_key+0x1e6/0x2e0
 mutex_lock_nested+0x1b/0x20
 ? mutex_lock_nested+0x1b/0x20
 __btrfs_release_delayed_node+0x7c/0x5b0
 btrfs_remove_delayed_node+0x49/0x50
 btrfs_evict_inode+0x6fc/0x900
 ? btrfs_setattr+0x840/0x840
 ? do_raw_spin_unlock+0xa8/0x140
 evict+0x19a/0x2c0
 dispose_list+0xa0/0xe0
 prune_icache_sb+0xbd/0xf0
 ? invalidate_inodes+0x310/0x310
 super_cache_scan+0x1b5/0x250
 do_shrink_slab+0x1f6/0x530
 shrink_slab+0x32e/0x410
 ? do_shrink_slab+0x530/0x530
 ? do_shrink_slab+0x530/0x530
 ? __kasan_check_read+0x11/0x20
 ? mem_cgroup_protected+0x13d/0x260
 shrink_node+0x2a5/0xba0
 balance_pgdat+0x4bd/0x8a0
 ? mem_cgroup_shrink_node+0x490/0x490
 ? _raw_spin_unlock_irq+0x27/0x40
 ? finish_task_switch+0xce/0x390
 ? rcu_read_lock_bh_held+0xb0/0xb0
 kswapd+0x35a/0x800
 ? _raw_spin_unlock_irqrestore+0x4c/0x60
 ? balance_pgdat+0x8a0/0x8a0
 ? finish_wait+0x110/0x110
 ? __kasan_check_read+0x11/0x20
 ? __kthread_parkme+0xc6/0xe0
 ? balance_pgdat+0x8a0/0x8a0
 kthread+0x1e9/0x210
 ? kthread_create_worker_on_cpu+0xc0/0xc0
 ret_from_fork+0x3a/0x50

This is because we hold that delayed node's mutex while doing tree
operations.  Fix this by just wrapping the searches in nofs.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/delayed-inode.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index e9522f2f25ccb..7374fb23381ca 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -6,6 +6,7 @@
 
 #include <linux/slab.h>
 #include <linux/iversion.h>
+#include <linux/sched/mm.h>
 #include "delayed-inode.h"
 #include "disk-io.h"
 #include "transaction.h"
@@ -801,11 +802,14 @@ static int btrfs_insert_delayed_item(struct btrfs_trans_handle *trans,
 				     struct btrfs_delayed_item *delayed_item)
 {
 	struct extent_buffer *leaf;
+	unsigned int nofs_flag;
 	char *ptr;
 	int ret;
 
+	nofs_flag = memalloc_nofs_save();
 	ret = btrfs_insert_empty_item(trans, root, path, &delayed_item->key,
 				      delayed_item->data_len);
+	memalloc_nofs_restore(nofs_flag);
 	if (ret < 0 && ret != -EEXIST)
 		return ret;
 
@@ -933,6 +937,7 @@ static int btrfs_delete_delayed_items(struct btrfs_trans_handle *trans,
 				      struct btrfs_delayed_node *node)
 {
 	struct btrfs_delayed_item *curr, *prev;
+	unsigned int nofs_flag;
 	int ret = 0;
 
 do_again:
@@ -941,7 +946,9 @@ static int btrfs_delete_delayed_items(struct btrfs_trans_handle *trans,
 	if (!curr)
 		goto delete_fail;
 
+	nofs_flag = memalloc_nofs_save();
 	ret = btrfs_search_slot(trans, root, &curr->key, path, -1, 1);
+	memalloc_nofs_restore(nofs_flag);
 	if (ret < 0)
 		goto delete_fail;
 	else if (ret > 0) {
@@ -1008,6 +1015,7 @@ static int __btrfs_update_delayed_inode(struct btrfs_trans_handle *trans,
 	struct btrfs_key key;
 	struct btrfs_inode_item *inode_item;
 	struct extent_buffer *leaf;
+	unsigned int nofs_flag;
 	int mod;
 	int ret;
 
@@ -1020,7 +1028,9 @@ static int __btrfs_update_delayed_inode(struct btrfs_trans_handle *trans,
 	else
 		mod = 1;
 
+	nofs_flag = memalloc_nofs_save();
 	ret = btrfs_lookup_inode(trans, root, path, &key, mod);
+	memalloc_nofs_restore(nofs_flag);
 	if (ret > 0) {
 		btrfs_release_path(path);
 		return -ENOENT;
@@ -1071,7 +1081,10 @@ static int __btrfs_update_delayed_inode(struct btrfs_trans_handle *trans,
 
 	key.type = BTRFS_INODE_EXTREF_KEY;
 	key.offset = -1;
+
+	nofs_flag = memalloc_nofs_save();
 	ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
+	memalloc_nofs_restore(nofs_flag);
 	if (ret < 0)
 		goto err_out;
 	ASSERT(ret);
-- 
2.20.1

[PATCH 4.19 133/146] dm zoned: remove duplicate nr_rnd_zones increase in dmz_init_zone()

[Greg Kroah-Hartman]

From: Bob Liu <bob.liu@oracle.com>

[ Upstream commit b8fdd090376a7a46d17db316638fe54b965c2fb0 ]

zmd->nr_rnd_zones was increased twice by mistake. The other place it
is increased in dmz_init_zone() is the only one needed:

1131                 zmd->nr_useable_zones++;
1132                 if (dmz_is_rnd(zone)) {
1133                         zmd->nr_rnd_zones++;
					^^^
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-zoned-metadata.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/md/dm-zoned-metadata.c b/drivers/md/dm-zoned-metadata.c
index 086a870087cff..53eb21343b11f 100644
--- a/drivers/md/dm-zoned-metadata.c
+++ b/drivers/md/dm-zoned-metadata.c
@@ -1105,7 +1105,6 @@ static int dmz_init_zone(struct dmz_metadata *zmd, struct dm_zone *zone,
 
 	if (blkz->type == BLK_ZONE_TYPE_CONVENTIONAL) {
 		set_bit(DMZ_RND, &zone->flags);
-		zmd->nr_rnd_zones++;
 	} else if (blkz->type == BLK_ZONE_TYPE_SEQWRITE_REQ ||
 		   blkz->type == BLK_ZONE_TYPE_SEQWRITE_PREF) {
 		set_bit(DMZ_SEQ, &zone->flags);
-- 
2.20.1

[PATCH 4.19 134/146] crypto: caam - update xts sector size for large input length

[Greg Kroah-Hartman]

From: Andrei Botila <andrei.botila@nxp.com>

[ Upstream commit 3f142b6a7b573bde6cff926f246da05652c61eb4 ]

Since in the software implementation of XTS-AES there is
no notion of sector every input length is processed the same way.
CAAM implementation has the notion of sector which causes different
results between the software implementation and the one in CAAM
for input lengths bigger than 512 bytes.
Increase sector size to maximum value on 16 bits.

Fixes: c6415a6016bf ("crypto: caam - add support for acipher xts(aes)")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/caam/caamalg_desc.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/caam/caamalg_desc.c b/drivers/crypto/caam/caamalg_desc.c
index edacf9b39b638..ceb033930535f 100644
--- a/drivers/crypto/caam/caamalg_desc.c
+++ b/drivers/crypto/caam/caamalg_desc.c
@@ -1457,7 +1457,13 @@ EXPORT_SYMBOL(cnstr_shdsc_ablkcipher_givencap);
  */
 void cnstr_shdsc_xts_ablkcipher_encap(u32 * const desc, struct alginfo *cdata)
 {
-	__be64 sector_size = cpu_to_be64(512);
+	/*
+	 * Set sector size to a big value, practically disabling
+	 * sector size segmentation in xts implementation. We cannot
+	 * take full advantage of this HW feature with existing
+	 * crypto API / dm-crypt SW architecture.
+	 */
+	__be64 sector_size = cpu_to_be64(BIT(15));
 	u32 *key_jump_cmd;
 
 	init_sh_desc(desc, HDR_SHARE_SERIAL | HDR_SAVECTX);
@@ -1509,7 +1515,13 @@ EXPORT_SYMBOL(cnstr_shdsc_xts_ablkcipher_encap);
  */
 void cnstr_shdsc_xts_ablkcipher_decap(u32 * const desc, struct alginfo *cdata)
 {
-	__be64 sector_size = cpu_to_be64(512);
+	/*
+	 * Set sector size to a big value, practically disabling
+	 * sector size segmentation in xts implementation. We cannot
+	 * take full advantage of this HW feature with existing
+	 * crypto API / dm-crypt SW architecture.
+	 */
+	__be64 sector_size = cpu_to_be64(BIT(15));
 	u32 *key_jump_cmd;
 
 	init_sh_desc(desc, HDR_SHARE_SERIAL | HDR_SAVECTX);
-- 
2.20.1

[PATCH 4.19 135/146] crypto: ccree - improve error handling

[Greg Kroah-Hartman]

From: Hadar Gat <hadar.gat@arm.com>

[ Upstream commit ccba2f1112d4871982ae3f09d1984c0443c89a97 ]

pass the returned error code to the higher level functions

Signed-off-by: Hadar Gat <hadar.gat@arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ccree/cc_buffer_mgr.c | 74 +++++++++++++---------------
 1 file changed, 35 insertions(+), 39 deletions(-)

diff --git a/drivers/crypto/ccree/cc_buffer_mgr.c b/drivers/crypto/ccree/cc_buffer_mgr.c
index 90b4870078fb7..7489887cc7802 100644
--- a/drivers/crypto/ccree/cc_buffer_mgr.c
+++ b/drivers/crypto/ccree/cc_buffer_mgr.c
@@ -460,10 +460,8 @@ int cc_map_cipher_request(struct cc_drvdata *drvdata, void *ctx,
 	/* Map the src SGL */
 	rc = cc_map_sg(dev, src, nbytes, DMA_BIDIRECTIONAL, &req_ctx->in_nents,
 		       LLI_MAX_NUM_OF_DATA_ENTRIES, &dummy, &mapped_nents);
-	if (rc) {
-		rc = -ENOMEM;
+	if (rc)
 		goto cipher_exit;
-	}
 	if (mapped_nents > 1)
 		req_ctx->dma_buf_type = CC_DMA_BUF_MLLI;
 
@@ -477,12 +475,11 @@ int cc_map_cipher_request(struct cc_drvdata *drvdata, void *ctx,
 		}
 	} else {
 		/* Map the dst sg */
-		if (cc_map_sg(dev, dst, nbytes, DMA_BIDIRECTIONAL,
-			      &req_ctx->out_nents, LLI_MAX_NUM_OF_DATA_ENTRIES,
-			      &dummy, &mapped_nents)) {
-			rc = -ENOMEM;
+		rc = cc_map_sg(dev, dst, nbytes, DMA_BIDIRECTIONAL,
+			       &req_ctx->out_nents, LLI_MAX_NUM_OF_DATA_ENTRIES,
+			       &dummy, &mapped_nents);
+		if (rc)
 			goto cipher_exit;
-		}
 		if (mapped_nents > 1)
 			req_ctx->dma_buf_type = CC_DMA_BUF_MLLI;
 
@@ -1033,10 +1030,8 @@ static int cc_aead_chain_data(struct cc_drvdata *drvdata,
 			       &areq_ctx->dst.nents,
 			       LLI_MAX_NUM_OF_DATA_ENTRIES, &dst_last_bytes,
 			       &dst_mapped_nents);
-		if (rc) {
-			rc = -ENOMEM;
+		if (rc)
 			goto chain_data_exit;
-		}
 	}
 
 	dst_mapped_nents = cc_get_sgl_nents(dev, req->dst, size_for_map,
@@ -1190,11 +1185,10 @@ int cc_map_aead_request(struct cc_drvdata *drvdata, struct aead_request *req)
 		}
 		areq_ctx->ccm_iv0_dma_addr = dma_addr;
 
-		if (cc_set_aead_conf_buf(dev, areq_ctx, areq_ctx->ccm_config,
-					 &sg_data, req->assoclen)) {
-			rc = -ENOMEM;
+		rc = cc_set_aead_conf_buf(dev, areq_ctx, areq_ctx->ccm_config,
+					  &sg_data, req->assoclen);
+		if (rc)
 			goto aead_map_failure;
-		}
 	}
 
 	if (areq_ctx->cipher_mode == DRV_CIPHER_GCTR) {
@@ -1254,10 +1248,8 @@ int cc_map_aead_request(struct cc_drvdata *drvdata, struct aead_request *req)
 		       (LLI_MAX_NUM_OF_ASSOC_DATA_ENTRIES +
 			LLI_MAX_NUM_OF_DATA_ENTRIES),
 		       &dummy, &mapped_nents);
-	if (rc) {
-		rc = -ENOMEM;
+	if (rc)
 		goto aead_map_failure;
-	}
 
 	if (areq_ctx->is_single_pass) {
 		/*
@@ -1341,6 +1333,7 @@ int cc_map_hash_request_final(struct cc_drvdata *drvdata, void *ctx,
 	struct mlli_params *mlli_params = &areq_ctx->mlli_params;
 	struct buffer_array sg_data;
 	struct buff_mgr_handle *buff_mgr = drvdata->buff_mgr_handle;
+	int rc = 0;
 	u32 dummy = 0;
 	u32 mapped_nents = 0;
 
@@ -1360,18 +1353,18 @@ int cc_map_hash_request_final(struct cc_drvdata *drvdata, void *ctx,
 	/*TODO: copy data in case that buffer is enough for operation */
 	/* map the previous buffer */
 	if (*curr_buff_cnt) {
-		if (cc_set_hash_buf(dev, areq_ctx, curr_buff, *curr_buff_cnt,
-				    &sg_data)) {
-			return -ENOMEM;
-		}
+		rc = cc_set_hash_buf(dev, areq_ctx, curr_buff, *curr_buff_cnt,
+				     &sg_data);
+		if (rc)
+			return rc;
 	}
 
 	if (src && nbytes > 0 && do_update) {
-		if (cc_map_sg(dev, src, nbytes, DMA_TO_DEVICE,
-			      &areq_ctx->in_nents, LLI_MAX_NUM_OF_DATA_ENTRIES,
-			      &dummy, &mapped_nents)) {
+		rc = cc_map_sg(dev, src, nbytes, DMA_TO_DEVICE,
+			       &areq_ctx->in_nents, LLI_MAX_NUM_OF_DATA_ENTRIES,
+			       &dummy, &mapped_nents);
+		if (rc)
 			goto unmap_curr_buff;
-		}
 		if (src && mapped_nents == 1 &&
 		    areq_ctx->data_dma_buf_type == CC_DMA_BUF_NULL) {
 			memcpy(areq_ctx->buff_sg, src,
@@ -1390,7 +1383,8 @@ int cc_map_hash_request_final(struct cc_drvdata *drvdata, void *ctx,
 		/* add the src data to the sg_data */
 		cc_add_sg_entry(dev, &sg_data, areq_ctx->in_nents, src, nbytes,
 				0, true, &areq_ctx->mlli_nents);
-		if (cc_generate_mlli(dev, &sg_data, mlli_params, flags))
+		rc = cc_generate_mlli(dev, &sg_data, mlli_params, flags);
+		if (rc)
 			goto fail_unmap_din;
 	}
 	/* change the buffer index for the unmap function */
@@ -1406,7 +1400,7 @@ int cc_map_hash_request_final(struct cc_drvdata *drvdata, void *ctx,
 	if (*curr_buff_cnt)
 		dma_unmap_sg(dev, areq_ctx->buff_sg, 1, DMA_TO_DEVICE);
 
-	return -ENOMEM;
+	return rc;
 }
 
 int cc_map_hash_request_update(struct cc_drvdata *drvdata, void *ctx,
@@ -1425,6 +1419,7 @@ int cc_map_hash_request_update(struct cc_drvdata *drvdata, void *ctx,
 	struct buffer_array sg_data;
 	struct buff_mgr_handle *buff_mgr = drvdata->buff_mgr_handle;
 	unsigned int swap_index = 0;
+	int rc = 0;
 	u32 dummy = 0;
 	u32 mapped_nents = 0;
 
@@ -1469,21 +1464,21 @@ int cc_map_hash_request_update(struct cc_drvdata *drvdata, void *ctx,
 	}
 
 	if (*curr_buff_cnt) {
-		if (cc_set_hash_buf(dev, areq_ctx, curr_buff, *curr_buff_cnt,
-				    &sg_data)) {
-			return -ENOMEM;
-		}
+		rc = cc_set_hash_buf(dev, areq_ctx, curr_buff, *curr_buff_cnt,
+				     &sg_data);
+		if (rc)
+			return rc;
 		/* change the buffer index for next operation */
 		swap_index = 1;
 	}
 
 	if (update_data_len > *curr_buff_cnt) {
-		if (cc_map_sg(dev, src, (update_data_len - *curr_buff_cnt),
-			      DMA_TO_DEVICE, &areq_ctx->in_nents,
-			      LLI_MAX_NUM_OF_DATA_ENTRIES, &dummy,
-			      &mapped_nents)) {
+		rc = cc_map_sg(dev, src, (update_data_len - *curr_buff_cnt),
+			       DMA_TO_DEVICE, &areq_ctx->in_nents,
+			       LLI_MAX_NUM_OF_DATA_ENTRIES, &dummy,
+			       &mapped_nents);
+		if (rc)
 			goto unmap_curr_buff;
-		}
 		if (mapped_nents == 1 &&
 		    areq_ctx->data_dma_buf_type == CC_DMA_BUF_NULL) {
 			/* only one entry in the SG and no previous data */
@@ -1503,7 +1498,8 @@ int cc_map_hash_request_update(struct cc_drvdata *drvdata, void *ctx,
 		cc_add_sg_entry(dev, &sg_data, areq_ctx->in_nents, src,
 				(update_data_len - *curr_buff_cnt), 0, true,
 				&areq_ctx->mlli_nents);
-		if (cc_generate_mlli(dev, &sg_data, mlli_params, flags))
+		rc = cc_generate_mlli(dev, &sg_data, mlli_params, flags);
+		if (rc)
 			goto fail_unmap_din;
 	}
 	areq_ctx->buff_index = (areq_ctx->buff_index ^ swap_index);
@@ -1517,7 +1513,7 @@ int cc_map_hash_request_update(struct cc_drvdata *drvdata, void *ctx,
 	if (*curr_buff_cnt)
 		dma_unmap_sg(dev, areq_ctx->buff_sg, 1, DMA_TO_DEVICE);
 
-	return -ENOMEM;
+	return rc;
 }
 
 void cc_unmap_hash_request(struct device *dev, void *ctx,
-- 
2.20.1

[PATCH 4.19 136/146] crypto: ccree - zero out internal struct before use

[Greg Kroah-Hartman]

From: Gilad Ben-Yossef <gilad@benyossef.com>

[ Upstream commit 9f31eb6e08cc1b0eb3926eebf4c51467479a7722 ]

We did not zero out the internal struct before use causing problem
in some rare error code paths.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ccree/cc_aead.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/crypto/ccree/cc_aead.c b/drivers/crypto/ccree/cc_aead.c
index aa6b45bc13b98..c9233420fe421 100644
--- a/drivers/crypto/ccree/cc_aead.c
+++ b/drivers/crypto/ccree/cc_aead.c
@@ -2058,6 +2058,8 @@ static int cc_aead_encrypt(struct aead_request *req)
 	struct aead_req_ctx *areq_ctx = aead_request_ctx(req);
 	int rc;
 
+	memset(areq_ctx, 0, sizeof(*areq_ctx));
+
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
 	areq_ctx->backup_giv = NULL;
@@ -2087,6 +2089,8 @@ static int cc_rfc4309_ccm_encrypt(struct aead_request *req)
 		goto out;
 	}
 
+	memset(areq_ctx, 0, sizeof(*areq_ctx));
+
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
 	areq_ctx->backup_giv = NULL;
@@ -2106,6 +2110,8 @@ static int cc_aead_decrypt(struct aead_request *req)
 	struct aead_req_ctx *areq_ctx = aead_request_ctx(req);
 	int rc;
 
+	memset(areq_ctx, 0, sizeof(*areq_ctx));
+
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
 	areq_ctx->backup_giv = NULL;
@@ -2133,6 +2139,8 @@ static int cc_rfc4309_ccm_decrypt(struct aead_request *req)
 		goto out;
 	}
 
+	memset(areq_ctx, 0, sizeof(*areq_ctx));
+
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
 	areq_ctx->backup_giv = NULL;
@@ -2250,6 +2258,8 @@ static int cc_rfc4106_gcm_encrypt(struct aead_request *req)
 		goto out;
 	}
 
+	memset(areq_ctx, 0, sizeof(*areq_ctx));
+
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
 	areq_ctx->backup_giv = NULL;
@@ -2273,6 +2283,8 @@ static int cc_rfc4543_gcm_encrypt(struct aead_request *req)
 	struct aead_req_ctx *areq_ctx = aead_request_ctx(req);
 	int rc;
 
+	memset(areq_ctx, 0, sizeof(*areq_ctx));
+
 	//plaintext is not encryped with rfc4543
 	areq_ctx->plaintext_authenticate_only = true;
 
@@ -2305,6 +2317,8 @@ static int cc_rfc4106_gcm_decrypt(struct aead_request *req)
 		goto out;
 	}
 
+	memset(areq_ctx, 0, sizeof(*areq_ctx));
+
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
 	areq_ctx->backup_giv = NULL;
@@ -2328,6 +2342,8 @@ static int cc_rfc4543_gcm_decrypt(struct aead_request *req)
 	struct aead_req_ctx *areq_ctx = aead_request_ctx(req);
 	int rc;
 
+	memset(areq_ctx, 0, sizeof(*areq_ctx));
+
 	//plaintext is not decryped with rfc4543
 	areq_ctx->plaintext_authenticate_only = true;
 
-- 
2.20.1

[PATCH 4.19 137/146] crypto: ccree - dont mangle the request assoclen

[Greg Kroah-Hartman]

From: Gilad Ben-Yossef <gilad@benyossef.com>

[ Upstream commit da3cf67f1bcf25b069a54ff70fd108860242c8f7 ]

We were mangling the request struct assoclen field.
Fix it by keeping an internal version and working on it.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ccree/cc_aead.c       | 40 +++++++++++++++++-----------
 drivers/crypto/ccree/cc_aead.h       |  1 +
 drivers/crypto/ccree/cc_buffer_mgr.c | 22 +++++++--------
 3 files changed, 37 insertions(+), 26 deletions(-)

diff --git a/drivers/crypto/ccree/cc_aead.c b/drivers/crypto/ccree/cc_aead.c
index c9233420fe421..57aac15a335f5 100644
--- a/drivers/crypto/ccree/cc_aead.c
+++ b/drivers/crypto/ccree/cc_aead.c
@@ -731,7 +731,7 @@ static void cc_set_assoc_desc(struct aead_request *areq, unsigned int flow_mode,
 		dev_dbg(dev, "ASSOC buffer type DLLI\n");
 		hw_desc_init(&desc[idx]);
 		set_din_type(&desc[idx], DMA_DLLI, sg_dma_address(areq->src),
-			     areq->assoclen, NS_BIT);
+			     areq_ctx->assoclen, NS_BIT);
 		set_flow_mode(&desc[idx], flow_mode);
 		if (ctx->auth_mode == DRV_HASH_XCBC_MAC &&
 		    areq_ctx->cryptlen > 0)
@@ -1080,9 +1080,11 @@ static void cc_proc_header_desc(struct aead_request *req,
 				struct cc_hw_desc desc[],
 				unsigned int *seq_size)
 {
+	struct aead_req_ctx *areq_ctx = aead_request_ctx(req);
 	unsigned int idx = *seq_size;
+
 	/* Hash associated data */
-	if (req->assoclen > 0)
+	if (areq_ctx->assoclen > 0)
 		cc_set_assoc_desc(req, DIN_HASH, desc, &idx);
 
 	/* Hash IV */
@@ -1310,7 +1312,7 @@ static int validate_data_size(struct cc_aead_ctx *ctx,
 {
 	struct aead_req_ctx *areq_ctx = aead_request_ctx(req);
 	struct device *dev = drvdata_to_dev(ctx->drvdata);
-	unsigned int assoclen = req->assoclen;
+	unsigned int assoclen = areq_ctx->assoclen;
 	unsigned int cipherlen = (direct == DRV_CRYPTO_DIRECTION_DECRYPT) ?
 			(req->cryptlen - ctx->authsize) : req->cryptlen;
 
@@ -1469,7 +1471,7 @@ static int cc_ccm(struct aead_request *req, struct cc_hw_desc desc[],
 	idx++;
 
 	/* process assoc data */
-	if (req->assoclen > 0) {
+	if (req_ctx->assoclen > 0) {
 		cc_set_assoc_desc(req, DIN_HASH, desc, &idx);
 	} else {
 		hw_desc_init(&desc[idx]);
@@ -1561,7 +1563,7 @@ static int config_ccm_adata(struct aead_request *req)
 	 * NIST Special Publication 800-38C
 	 */
 	*b0 |= (8 * ((m - 2) / 2));
-	if (req->assoclen > 0)
+	if (req_ctx->assoclen > 0)
 		*b0 |= 64;  /* Enable bit 6 if Adata exists. */
 
 	rc = set_msg_len(b0 + 16 - l, cryptlen, l);  /* Write L'. */
@@ -1572,7 +1574,7 @@ static int config_ccm_adata(struct aead_request *req)
 	 /* END of "taken from crypto/ccm.c" */
 
 	/* l(a) - size of associated data. */
-	req_ctx->ccm_hdr_size = format_ccm_a0(a0, req->assoclen);
+	req_ctx->ccm_hdr_size = format_ccm_a0(a0, req_ctx->assoclen);
 
 	memset(req->iv + 15 - req->iv[0], 0, req->iv[0] + 1);
 	req->iv[15] = 1;
@@ -1604,7 +1606,7 @@ static void cc_proc_rfc4309_ccm(struct aead_request *req)
 	memcpy(areq_ctx->ctr_iv + CCM_BLOCK_IV_OFFSET, req->iv,
 	       CCM_BLOCK_IV_SIZE);
 	req->iv = areq_ctx->ctr_iv;
-	req->assoclen -= CCM_BLOCK_IV_SIZE;
+	areq_ctx->assoclen -= CCM_BLOCK_IV_SIZE;
 }
 
 static void cc_set_ghash_desc(struct aead_request *req,
@@ -1812,7 +1814,7 @@ static int cc_gcm(struct aead_request *req, struct cc_hw_desc desc[],
 	// for gcm and rfc4106.
 	cc_set_ghash_desc(req, desc, seq_size);
 	/* process(ghash) assoc data */
-	if (req->assoclen > 0)
+	if (req_ctx->assoclen > 0)
 		cc_set_assoc_desc(req, DIN_HASH, desc, seq_size);
 	cc_set_gctr_desc(req, desc, seq_size);
 	/* process(gctr+ghash) */
@@ -1836,8 +1838,8 @@ static int config_gcm_context(struct aead_request *req)
 				(req->cryptlen - ctx->authsize);
 	__be32 counter = cpu_to_be32(2);
 
-	dev_dbg(dev, "%s() cryptlen = %d, req->assoclen = %d ctx->authsize = %d\n",
-		__func__, cryptlen, req->assoclen, ctx->authsize);
+	dev_dbg(dev, "%s() cryptlen = %d, req_ctx->assoclen = %d ctx->authsize = %d\n",
+		__func__, cryptlen, req_ctx->assoclen, ctx->authsize);
 
 	memset(req_ctx->hkey, 0, AES_BLOCK_SIZE);
 
@@ -1853,7 +1855,7 @@ static int config_gcm_context(struct aead_request *req)
 	if (!req_ctx->plaintext_authenticate_only) {
 		__be64 temp64;
 
-		temp64 = cpu_to_be64(req->assoclen * 8);
+		temp64 = cpu_to_be64(req_ctx->assoclen * 8);
 		memcpy(&req_ctx->gcm_len_block.len_a, &temp64, sizeof(temp64));
 		temp64 = cpu_to_be64(cryptlen * 8);
 		memcpy(&req_ctx->gcm_len_block.len_c, &temp64, 8);
@@ -1863,8 +1865,8 @@ static int config_gcm_context(struct aead_request *req)
 		 */
 		__be64 temp64;
 
-		temp64 = cpu_to_be64((req->assoclen + GCM_BLOCK_RFC4_IV_SIZE +
-				      cryptlen) * 8);
+		temp64 = cpu_to_be64((req_ctx->assoclen +
+				      GCM_BLOCK_RFC4_IV_SIZE + cryptlen) * 8);
 		memcpy(&req_ctx->gcm_len_block.len_a, &temp64, sizeof(temp64));
 		temp64 = 0;
 		memcpy(&req_ctx->gcm_len_block.len_c, &temp64, 8);
@@ -1884,7 +1886,7 @@ static void cc_proc_rfc4_gcm(struct aead_request *req)
 	memcpy(areq_ctx->ctr_iv + GCM_BLOCK_RFC4_IV_OFFSET, req->iv,
 	       GCM_BLOCK_RFC4_IV_SIZE);
 	req->iv = areq_ctx->ctr_iv;
-	req->assoclen -= GCM_BLOCK_RFC4_IV_SIZE;
+	areq_ctx->assoclen -= GCM_BLOCK_RFC4_IV_SIZE;
 }
 
 static int cc_proc_aead(struct aead_request *req,
@@ -1909,7 +1911,7 @@ static int cc_proc_aead(struct aead_request *req,
 	/* Check data length according to mode */
 	if (validate_data_size(ctx, direct, req)) {
 		dev_err(dev, "Unsupported crypt/assoc len %d/%d.\n",
-			req->cryptlen, req->assoclen);
+			req->cryptlen, areq_ctx->assoclen);
 		crypto_aead_set_flags(tfm, CRYPTO_TFM_RES_BAD_BLOCK_LEN);
 		return -EINVAL;
 	}
@@ -2062,6 +2064,7 @@ static int cc_aead_encrypt(struct aead_request *req)
 
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
+	areq_ctx->assoclen = req->assoclen;
 	areq_ctx->backup_giv = NULL;
 	areq_ctx->is_gcm4543 = false;
 
@@ -2093,6 +2096,7 @@ static int cc_rfc4309_ccm_encrypt(struct aead_request *req)
 
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
+	areq_ctx->assoclen = req->assoclen;
 	areq_ctx->backup_giv = NULL;
 	areq_ctx->is_gcm4543 = true;
 
@@ -2114,6 +2118,7 @@ static int cc_aead_decrypt(struct aead_request *req)
 
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
+	areq_ctx->assoclen = req->assoclen;
 	areq_ctx->backup_giv = NULL;
 	areq_ctx->is_gcm4543 = false;
 
@@ -2143,6 +2148,7 @@ static int cc_rfc4309_ccm_decrypt(struct aead_request *req)
 
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
+	areq_ctx->assoclen = req->assoclen;
 	areq_ctx->backup_giv = NULL;
 
 	areq_ctx->is_gcm4543 = true;
@@ -2262,6 +2268,7 @@ static int cc_rfc4106_gcm_encrypt(struct aead_request *req)
 
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
+	areq_ctx->assoclen = req->assoclen;
 	areq_ctx->backup_giv = NULL;
 
 	areq_ctx->plaintext_authenticate_only = false;
@@ -2290,6 +2297,7 @@ static int cc_rfc4543_gcm_encrypt(struct aead_request *req)
 
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
+	areq_ctx->assoclen = req->assoclen;
 	areq_ctx->backup_giv = NULL;
 
 	cc_proc_rfc4_gcm(req);
@@ -2321,6 +2329,7 @@ static int cc_rfc4106_gcm_decrypt(struct aead_request *req)
 
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
+	areq_ctx->assoclen = req->assoclen;
 	areq_ctx->backup_giv = NULL;
 
 	areq_ctx->plaintext_authenticate_only = false;
@@ -2349,6 +2358,7 @@ static int cc_rfc4543_gcm_decrypt(struct aead_request *req)
 
 	/* No generated IV required */
 	areq_ctx->backup_iv = req->iv;
+	areq_ctx->assoclen = req->assoclen;
 	areq_ctx->backup_giv = NULL;
 
 	cc_proc_rfc4_gcm(req);
diff --git a/drivers/crypto/ccree/cc_aead.h b/drivers/crypto/ccree/cc_aead.h
index 5edf3b351fa44..74bc99067f180 100644
--- a/drivers/crypto/ccree/cc_aead.h
+++ b/drivers/crypto/ccree/cc_aead.h
@@ -67,6 +67,7 @@ struct aead_req_ctx {
 	u8 backup_mac[MAX_MAC_SIZE];
 	u8 *backup_iv; /*store iv for generated IV flow*/
 	u8 *backup_giv; /*store iv for rfc3686(ctr) flow*/
+	u32 assoclen; /* internal assoclen */
 	dma_addr_t mac_buf_dma_addr; /* internal ICV DMA buffer */
 	/* buffer for internal ccm configurations */
 	dma_addr_t ccm_iv0_dma_addr;
diff --git a/drivers/crypto/ccree/cc_buffer_mgr.c b/drivers/crypto/ccree/cc_buffer_mgr.c
index 7489887cc7802..6681d113c0d67 100644
--- a/drivers/crypto/ccree/cc_buffer_mgr.c
+++ b/drivers/crypto/ccree/cc_buffer_mgr.c
@@ -65,7 +65,7 @@ static void cc_copy_mac(struct device *dev, struct aead_request *req,
 {
 	struct aead_req_ctx *areq_ctx = aead_request_ctx(req);
 	struct crypto_aead *tfm = crypto_aead_reqtfm(req);
-	u32 skip = req->assoclen + req->cryptlen;
+	u32 skip = areq_ctx->assoclen + req->cryptlen;
 
 	if (areq_ctx->is_gcm4543)
 		skip += crypto_aead_ivsize(tfm);
@@ -574,8 +574,8 @@ void cc_unmap_aead_request(struct device *dev, struct aead_request *req)
 
 	dev_dbg(dev, "Unmapping src sgl: req->src=%pK areq_ctx->src.nents=%u areq_ctx->assoc.nents=%u assoclen:%u cryptlen=%u\n",
 		sg_virt(req->src), areq_ctx->src.nents, areq_ctx->assoc.nents,
-		req->assoclen, req->cryptlen);
-	size_to_unmap = req->assoclen + req->cryptlen;
+		areq_ctx->assoclen, req->cryptlen);
+	size_to_unmap = areq_ctx->assoclen + req->cryptlen;
 	if (areq_ctx->gen_ctx.op_type == DRV_CRYPTO_DIRECTION_ENCRYPT)
 		size_to_unmap += areq_ctx->req_authsize;
 	if (areq_ctx->is_gcm4543)
@@ -717,7 +717,7 @@ static int cc_aead_chain_assoc(struct cc_drvdata *drvdata,
 	struct scatterlist *current_sg = req->src;
 	struct crypto_aead *tfm = crypto_aead_reqtfm(req);
 	unsigned int sg_index = 0;
-	u32 size_of_assoc = req->assoclen;
+	u32 size_of_assoc = areq_ctx->assoclen;
 	struct device *dev = drvdata_to_dev(drvdata);
 
 	if (areq_ctx->is_gcm4543)
@@ -728,7 +728,7 @@ static int cc_aead_chain_assoc(struct cc_drvdata *drvdata,
 		goto chain_assoc_exit;
 	}
 
-	if (req->assoclen == 0) {
+	if (areq_ctx->assoclen == 0) {
 		areq_ctx->assoc_buff_type = CC_DMA_BUF_NULL;
 		areq_ctx->assoc.nents = 0;
 		areq_ctx->assoc.mlli_nents = 0;
@@ -788,7 +788,7 @@ static int cc_aead_chain_assoc(struct cc_drvdata *drvdata,
 			cc_dma_buf_type(areq_ctx->assoc_buff_type),
 			areq_ctx->assoc.nents);
 		cc_add_sg_entry(dev, sg_data, areq_ctx->assoc.nents, req->src,
-				req->assoclen, 0, is_last,
+				areq_ctx->assoclen, 0, is_last,
 				&areq_ctx->assoc.mlli_nents);
 		areq_ctx->assoc_buff_type = CC_DMA_BUF_MLLI;
 	}
@@ -972,11 +972,11 @@ static int cc_aead_chain_data(struct cc_drvdata *drvdata,
 	u32 src_mapped_nents = 0, dst_mapped_nents = 0;
 	u32 offset = 0;
 	/* non-inplace mode */
-	unsigned int size_for_map = req->assoclen + req->cryptlen;
+	unsigned int size_for_map = areq_ctx->assoclen + req->cryptlen;
 	struct crypto_aead *tfm = crypto_aead_reqtfm(req);
 	u32 sg_index = 0;
 	bool is_gcm4543 = areq_ctx->is_gcm4543;
-	u32 size_to_skip = req->assoclen;
+	u32 size_to_skip = areq_ctx->assoclen;
 
 	if (is_gcm4543)
 		size_to_skip += crypto_aead_ivsize(tfm);
@@ -1020,7 +1020,7 @@ static int cc_aead_chain_data(struct cc_drvdata *drvdata,
 	areq_ctx->src_offset = offset;
 
 	if (req->src != req->dst) {
-		size_for_map = req->assoclen + req->cryptlen;
+		size_for_map = areq_ctx->assoclen + req->cryptlen;
 		size_for_map += (direct == DRV_CRYPTO_DIRECTION_ENCRYPT) ?
 				authsize : 0;
 		if (is_gcm4543)
@@ -1186,7 +1186,7 @@ int cc_map_aead_request(struct cc_drvdata *drvdata, struct aead_request *req)
 		areq_ctx->ccm_iv0_dma_addr = dma_addr;
 
 		rc = cc_set_aead_conf_buf(dev, areq_ctx, areq_ctx->ccm_config,
-					  &sg_data, req->assoclen);
+					  &sg_data, areq_ctx->assoclen);
 		if (rc)
 			goto aead_map_failure;
 	}
@@ -1237,7 +1237,7 @@ int cc_map_aead_request(struct cc_drvdata *drvdata, struct aead_request *req)
 		areq_ctx->gcm_iv_inc2_dma_addr = dma_addr;
 	}
 
-	size_to_map = req->cryptlen + req->assoclen;
+	size_to_map = req->cryptlen + areq_ctx->assoclen;
 	if (areq_ctx->gen_ctx.op_type == DRV_CRYPTO_DIRECTION_ENCRYPT)
 		size_to_map += authsize;
 
-- 
2.20.1

[PATCH 4.19 138/146] crypto: ccree - dec auth tag size from cryptlen map

[Greg Kroah-Hartman]

From: Gilad Ben-Yossef <gilad@benyossef.com>

[ Upstream commit 8962c6d2c2b8ca51b0f188109015b15fc5f4da44 ]

Remove the auth tag size from cryptlen before mapping the destination
in out-of-place AEAD decryption thus resolving a crash with
extended testmgr tests.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org # v4.19+
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ccree/cc_buffer_mgr.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/ccree/cc_buffer_mgr.c b/drivers/crypto/ccree/cc_buffer_mgr.c
index 6681d113c0d67..77e31191e408a 100644
--- a/drivers/crypto/ccree/cc_buffer_mgr.c
+++ b/drivers/crypto/ccree/cc_buffer_mgr.c
@@ -1021,8 +1021,12 @@ static int cc_aead_chain_data(struct cc_drvdata *drvdata,
 
 	if (req->src != req->dst) {
 		size_for_map = areq_ctx->assoclen + req->cryptlen;
-		size_for_map += (direct == DRV_CRYPTO_DIRECTION_ENCRYPT) ?
-				authsize : 0;
+
+		if (direct == DRV_CRYPTO_DIRECTION_ENCRYPT)
+			size_for_map += authsize;
+		else
+			size_for_map -= authsize;
+
 		if (is_gcm4543)
 			size_for_map += crypto_aead_ivsize(tfm);
 
-- 
2.20.1

[PATCH 4.19 139/146] crypto: ccree - only try to map auth tag if needed

[Greg Kroah-Hartman]

From: Gilad Ben-Yossef <gilad@benyossef.com>

[ Upstream commit 504e84abec7a635b861afd8d7f92ecd13eaa2b09 ]

Make sure to only add the size of the auth tag to the source mapping
for encryption if it is an in-place operation. Failing to do this
previously caused us to try and map auth size len bytes from a NULL
mapping and crashing if both the cryptlen and assoclen are zero.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ccree/cc_buffer_mgr.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/ccree/cc_buffer_mgr.c b/drivers/crypto/ccree/cc_buffer_mgr.c
index 77e31191e408a..630020255941a 100644
--- a/drivers/crypto/ccree/cc_buffer_mgr.c
+++ b/drivers/crypto/ccree/cc_buffer_mgr.c
@@ -1242,9 +1242,11 @@ int cc_map_aead_request(struct cc_drvdata *drvdata, struct aead_request *req)
 	}
 
 	size_to_map = req->cryptlen + areq_ctx->assoclen;
-	if (areq_ctx->gen_ctx.op_type == DRV_CRYPTO_DIRECTION_ENCRYPT)
+	/* If we do in-place encryption, we also need the auth tag */
+	if ((areq_ctx->gen_ctx.op_type == DRV_CRYPTO_DIRECTION_ENCRYPT) &&
+	   (req->src == req->dst)) {
 		size_to_map += authsize;
-
+	}
 	if (is_gcm4543)
 		size_to_map += crypto_aead_ivsize(tfm);
 	rc = cc_map_sg(dev, req->src, size_to_map, DMA_BIDIRECTIONAL,
-- 
2.20.1

[PATCH 4.19 140/146] Revert "drm/dp_mst: Remove VCPI while disabling topology mgr"

[Greg Kroah-Hartman]

[ Upstream commit a86675968e2300fb567994459da3dbc4cd1b322a ]

This reverts commit 64e62bdf04ab8529f45ed0a85122c703035dec3a.

This commit ends up causing some lockdep splats due to trying to grab the
payload lock while holding the mgr's lock:

[   54.010099]
[   54.011765] ======================================================
[   54.018670] WARNING: possible circular locking dependency detected
[   54.025577] 5.5.0-rc6-02274-g77381c23ee63 #47 Not tainted
[   54.031610] ------------------------------------------------------
[   54.038516] kworker/1:6/1040 is trying to acquire lock:
[   54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.054957]
[   54.054957] but task is already holding lock:
[   54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4
[   54.071193]
[   54.071193] which lock already depends on the new lock.
[   54.071193]
[   54.080334]
[   54.080334] the existing dependency chain (in reverse order) is:
[   54.088697]
[   54.088697] -> #1 (&mgr->lock){+.+.}:
[   54.094440]        __mutex_lock+0xc3/0x498
[   54.099015]        drm_dp_mst_topology_get_port_validated+0x25/0x80
[   54.106018]        drm_dp_update_payload_part1+0xa2/0x2e2
[   54.112051]        intel_mst_pre_enable_dp+0x144/0x18f
[   54.117791]        intel_encoders_pre_enable+0x63/0x70
[   54.123532]        hsw_crtc_enable+0xa1/0x722
[   54.128396]        intel_update_crtc+0x50/0x194
[   54.133455]        skl_commit_modeset_enables+0x40c/0x540
[   54.139485]        intel_atomic_commit_tail+0x5f7/0x130d
[   54.145418]        intel_atomic_commit+0x2c8/0x2d8
[   54.150770]        drm_atomic_helper_set_config+0x5a/0x70
[   54.156801]        drm_mode_setcrtc+0x2ab/0x833
[   54.161862]        drm_ioctl+0x2e5/0x424
[   54.166242]        vfs_ioctl+0x21/0x2f
[   54.170426]        do_vfs_ioctl+0x5fb/0x61e
[   54.175096]        ksys_ioctl+0x55/0x75
[   54.179377]        __x64_sys_ioctl+0x1a/0x1e
[   54.184146]        do_syscall_64+0x5c/0x6d
[   54.188721]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   54.194946]
[   54.194946] -> #0 (&mgr->payload_lock){+.+.}:
[   54.201463]
[   54.201463] other info that might help us debug this:
[   54.201463]
[   54.210410]  Possible unsafe locking scenario:
[   54.210410]
[   54.217025]        CPU0                    CPU1
[   54.222082]        ----                    ----
[   54.227138]   lock(&mgr->lock);
[   54.230643]                                lock(&mgr->payload_lock);
[   54.237742]                                lock(&mgr->lock);
[   54.244062]   lock(&mgr->payload_lock);
[   54.248346]
[   54.248346]  *** DEADLOCK ***
[   54.248346]
[   54.254959] 7 locks held by kworker/1:6/1040:
[   54.259822]  #0: ffff888275c4f528 ((wq_completion)events){+.+.},
at: worker_thread+0x455/0x6e2
[   54.269451]  #1: ffffc9000119beb0
((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.},
at: worker_thread+0x455/0x6e2
[   54.282768]  #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.},
at: i915_hotplug_work_func+0x4b/0x2be
[   54.293368]  #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+},
at: i915_hotplug_work_func+0x17e/0x2be
[   54.304061]  #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.},
at: drm_helper_probe_detect_ctx+0x40/0xfd
[   54.314855]  #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at:
drm_modeset_lock+0x74/0xe2
[   54.324385]  #6: ffff888272af3060 (&mgr->lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4
[   54.334597]
[   54.334597] stack backtrace:
[   54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted
5.5.0-rc6-02274-g77381c23ee63 #47
[   54.348893] Hardware name: Google Fizz/Fizz, BIOS
Google_Fizz.10139.39.0 01/04/2018
[   54.357451] Workqueue: events i915_hotplug_work_func
[   54.362995] Call Trace:
[   54.365724]  dump_stack+0x71/0x9c
[   54.369427]  check_noncircular+0x91/0xbc
[   54.373809]  ? __lock_acquire+0xc9e/0xf66
[   54.378286]  ? __lock_acquire+0xc9e/0xf66
[   54.382763]  ? lock_acquire+0x175/0x1ac
[   54.387048]  ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.393177]  ? __mutex_lock+0xc3/0x498
[   54.397362]  ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.403492]  ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.409620]  ? drm_dp_dpcd_access+0xd9/0x101
[   54.414390]  ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.420517]  ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.426645]  ? intel_digital_port_connected+0x34d/0x35c
[   54.432482]  ? intel_dp_detect+0x227/0x44e
[   54.437056]  ? ww_mutex_lock+0x49/0x9a
[   54.441242]  ? drm_helper_probe_detect_ctx+0x75/0xfd
[   54.446789]  ? intel_encoder_hotplug+0x4b/0x97
[   54.451752]  ? intel_ddi_hotplug+0x61/0x2e0
[   54.456423]  ? mark_held_locks+0x53/0x68
[   54.460803]  ? _raw_spin_unlock_irqrestore+0x3a/0x51
[   54.466347]  ? lockdep_hardirqs_on+0x187/0x1a4
[   54.471310]  ? drm_connector_list_iter_next+0x89/0x9a
[   54.476953]  ? i915_hotplug_work_func+0x206/0x2be
[   54.482208]  ? worker_thread+0x4d5/0x6e2
[   54.486587]  ? worker_thread+0x455/0x6e2
[   54.490966]  ? queue_work_on+0x64/0x64
[   54.495151]  ? kthread+0x1e9/0x1f1
[   54.498946]  ? queue_work_on+0x64/0x64
[   54.503130]  ? kthread_unpark+0x5e/0x5e
[   54.507413]  ? ret_from_fork+0x3a/0x50

The proper fix for this is probably cleanup the VCPI allocations when we're
enabling the topology, or on the first payload allocation. For now though,
let's just revert.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology mgr")
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117205149.97262-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 7c3c323773d3d..b4fd20062bb80 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2115,7 +2115,6 @@ static bool drm_dp_get_vc_payload_bw(int dp_link_bw,
 int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool mst_state)
 {
 	int ret = 0;
-	int i = 0;
 	struct drm_dp_mst_branch *mstb = NULL;
 
 	mutex_lock(&mgr->lock);
@@ -2176,21 +2175,10 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
 		/* this can fail if the device is gone */
 		drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, 0);
 		ret = 0;
-		mutex_lock(&mgr->payload_lock);
 		memset(mgr->payloads, 0, mgr->max_payloads * sizeof(struct drm_dp_payload));
 		mgr->payload_mask = 0;
 		set_bit(0, &mgr->payload_mask);
-		for (i = 0; i < mgr->max_payloads; i++) {
-			struct drm_dp_vcpi *vcpi = mgr->proposed_vcpis[i];
-
-			if (vcpi) {
-				vcpi->vcpi = 0;
-				vcpi->num_slots = 0;
-			}
-			mgr->proposed_vcpis[i] = NULL;
-		}
 		mgr->vcpi_mask = 0;
-		mutex_unlock(&mgr->payload_lock);
 	}
 
 out_unlock:
-- 
2.20.1

[PATCH 4.19 141/146] drm/dp_mst: Fix clearing payload state on topology disable

[Greg Kroah-Hartman]

From: Lyude Paul <lyude@redhat.com>

[ Upstream commit 8732fe46b20c951493bfc4dba0ad08efdf41de81 ]

The issues caused by:

commit 64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology
mgr")

Prompted me to take a closer look at how we clear the payload state in
general when disabling the topology, and it turns out there's actually
two subtle issues here.

The first is that we're not grabbing &mgr.payload_lock when clearing the
payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical
lock order is &mgr.payload_lock -> &mgr.lock (because we always want
&mgr.lock to be the inner-most lock so topology validation always
works), this makes perfect sense. It also means that -technically- there
could be racing between someone calling
drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a
modeset occurring that's modifying the payload state at the same time.

The second is the more obvious issue that Wayne Lin discovered, that
we're not clearing proposed_payloads when disabling the topology.

I actually can't see any obvious places where the racing caused by the
first issue would break something, and it could be that some of our
higher-level locks already prevent this by happenstance, but better safe
then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst()
first grabs &mgr.payload_lock followed by &mgr.lock so that we never
race when modifying the payload state. Then, we also clear
proposed_payloads to fix the original issue of enabling a new topology
with a dirty payload state. This doesn't clear any of the drm_dp_vcpi
structures, but those are getting destroyed along with the ports anyway.

Changes since v1:
* Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead -
  vsyrjala

Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index b4fd20062bb80..5f508ec321fef 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2117,6 +2117,7 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
 	int ret = 0;
 	struct drm_dp_mst_branch *mstb = NULL;
 
+	mutex_lock(&mgr->payload_lock);
 	mutex_lock(&mgr->lock);
 	if (mst_state == mgr->mst_state)
 		goto out_unlock;
@@ -2175,7 +2176,10 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
 		/* this can fail if the device is gone */
 		drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, 0);
 		ret = 0;
-		memset(mgr->payloads, 0, mgr->max_payloads * sizeof(struct drm_dp_payload));
+		memset(mgr->payloads, 0,
+		       mgr->max_payloads * sizeof(mgr->payloads[0]));
+		memset(mgr->proposed_vcpis, 0,
+		       mgr->max_payloads * sizeof(mgr->proposed_vcpis[0]));
 		mgr->payload_mask = 0;
 		set_bit(0, &mgr->payload_mask);
 		mgr->vcpi_mask = 0;
@@ -2183,6 +2187,7 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
 
 out_unlock:
 	mutex_unlock(&mgr->lock);
+	mutex_unlock(&mgr->payload_lock);
 	if (mstb)
 		drm_dp_put_mst_branch_device(mstb);
 	return ret;
-- 
2.20.1

[PATCH 4.19 142/146] drm: Remove PageReserved manipulation from drm_pci_alloc

[Greg Kroah-Hartman]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit ea36ec8623f56791c6ff6738d0509b7920f85220 ]

drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma
facilities, and we have no special reason within the drm layer to behave
differently. In particular, since

commit de09d31dd38a50fdce106c15abd68432eebbd014
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date:   Fri Jan 15 16:51:42 2016 -0800

    page-flags: define PG_reserved behavior on compound pages

    As far as I can see there's no users of PG_reserved on compound pages.
    Let's use PF_NO_COMPOUND here.

it has been illegal to combine GFP_COMP with SetPageReserved, so lets
stop doing both and leave the dma layer to its own devices.

Reported-by: Taketo Kabe
Bug: https://gitlab.freedesktop.org/drm/intel/issues/1027
Fixes: de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_pci.c | 25 ++-----------------------
 1 file changed, 2 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
index 896e42a34895d..d89a992829beb 100644
--- a/drivers/gpu/drm/drm_pci.c
+++ b/drivers/gpu/drm/drm_pci.c
@@ -46,8 +46,6 @@
 drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align)
 {
 	drm_dma_handle_t *dmah;
-	unsigned long addr;
-	size_t sz;
 
 	/* pci_alloc_consistent only guarantees alignment to the smallest
 	 * PAGE_SIZE order which is greater than or equal to the requested size.
@@ -61,22 +59,13 @@ drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t ali
 		return NULL;
 
 	dmah->size = size;
-	dmah->vaddr = dma_alloc_coherent(&dev->pdev->dev, size, &dmah->busaddr, GFP_KERNEL | __GFP_COMP);
+	dmah->vaddr = dma_alloc_coherent(&dev->pdev->dev, size, &dmah->busaddr, GFP_KERNEL);
 
 	if (dmah->vaddr == NULL) {
 		kfree(dmah);
 		return NULL;
 	}
 
-	memset(dmah->vaddr, 0, size);
-
-	/* XXX - Is virt_to_page() legal for consistent mem? */
-	/* Reserve */
-	for (addr = (unsigned long)dmah->vaddr, sz = size;
-	     sz > 0; addr += PAGE_SIZE, sz -= PAGE_SIZE) {
-		SetPageReserved(virt_to_page((void *)addr));
-	}
-
 	return dmah;
 }
 
@@ -89,19 +78,9 @@ EXPORT_SYMBOL(drm_pci_alloc);
  */
 void __drm_legacy_pci_free(struct drm_device * dev, drm_dma_handle_t * dmah)
 {
-	unsigned long addr;
-	size_t sz;
-
-	if (dmah->vaddr) {
-		/* XXX - Is virt_to_page() legal for consistent mem? */
-		/* Unreserve */
-		for (addr = (unsigned long)dmah->vaddr, sz = dmah->size;
-		     sz > 0; addr += PAGE_SIZE, sz -= PAGE_SIZE) {
-			ClearPageReserved(virt_to_page((void *)addr));
-		}
+	if (dmah->vaddr)
 		dma_free_coherent(&dev->pdev->dev, dmah->size, dmah->vaddr,
 				  dmah->busaddr);
-	}
 }
 
 /**
-- 
2.20.1

[PATCH 4.19 143/146] ftrace/kprobe: Show the maxactive number on kprobe_events

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 6a13a0d7b4d1171ef9b80ad69abc37e1daa941b3 ]

Show maxactive parameter on kprobe_events.
This allows user to save the current configuration and
restore it without losing maxactive parameter.

Link: http://lkml.kernel.org/r/4762764a-6df7-bc93-ed60-e336146dce1f@gmail.com
Link: http://lkml.kernel.org/r/158503528846.22706.5549974121212526020.stgit@devnote2

Cc: stable@vger.kernel.org
Fixes: 696ced4fb1d76 ("tracing/kprobes: expose maxactive for kretprobe in kprobe_events")
Reported-by: Taeung Song <treeze.taeung@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_kprobe.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index c61b2b0a99e9c..65b4e28ff425f 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -975,6 +975,8 @@ static int probes_seq_show(struct seq_file *m, void *v)
 	int i;
 
 	seq_putc(m, trace_kprobe_is_return(tk) ? 'r' : 'p');
+	if (trace_kprobe_is_return(tk) && tk->rp.maxactive)
+		seq_printf(m, "%d", tk->rp.maxactive);
 	seq_printf(m, ":%s/%s", tk->tp.call.class->system,
 			trace_event_name(&tk->tp.call));
 
-- 
2.20.1

[PATCH 4.19 144/146] powerpc/fsl_booke: Avoid creating duplicate tlb1 entry

[Greg Kroah-Hartman]

From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

[ Upstream commit aa4113340ae6c2811e046f08c2bc21011d20a072 ]

In the current implementation, the call to loadcam_multi() is wrapped
between switch_to_as1() and restore_to_as0() calls so, when it tries
to create its own temporary AS=1 TLB1 entry, it ends up duplicating
the existing one created by switch_to_as1(). Add a check to skip
creating the temporary entry if already running in AS=1.

Fixes: d9e1831a4202 ("powerpc/85xx: Load all early TLB entries at once")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200123111914.2565-1-laurentiu.tudor@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/tlb_nohash_low.S | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index e066a658acac6..56f58a362ea56 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -402,7 +402,7 @@ _GLOBAL(set_context)
  * extern void loadcam_entry(unsigned int index)
  *
  * Load TLBCAM[index] entry in to the L2 CAM MMU
- * Must preserve r7, r8, r9, and r10
+ * Must preserve r7, r8, r9, r10 and r11
  */
 _GLOBAL(loadcam_entry)
 	mflr	r5
@@ -438,6 +438,10 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
  */
 _GLOBAL(loadcam_multi)
 	mflr	r8
+	/* Don't switch to AS=1 if already there */
+	mfmsr	r11
+	andi.	r11,r11,MSR_IS
+	bne	10f
 
 	/*
 	 * Set up temporary TLB entry that is the same as what we're
@@ -463,6 +467,7 @@ _GLOBAL(loadcam_multi)
 	mtmsr	r6
 	isync
 
+10:
 	mr	r9,r3
 	add	r10,r3,r4
 2:	bl	loadcam_entry
@@ -471,6 +476,10 @@ _GLOBAL(loadcam_multi)
 	mr	r3,r9
 	blt	2b
 
+	/* Don't return to AS=0 if we were in AS=1 at function start */
+	andi.	r11,r11,MSR_IS
+	bne	3f
+
 	/* Return to AS=0 and clear the temporary entry */
 	mfmsr	r6
 	rlwinm.	r6,r6,0,~(MSR_IS|MSR_DS)
@@ -486,6 +495,7 @@ _GLOBAL(loadcam_multi)
 	tlbwe
 	isync
 
+3:
 	mtlr	r8
 	blr
 #endif
-- 
2.20.1

[PATCH 4.19 145/146] misc: echo: Remove unnecessary parentheses and simplify check for zero

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 85dc2c65e6c975baaf36ea30f2ccc0a36a8c8add ]

Clang warns when multiple pairs of parentheses are used for a single
conditional statement.

drivers/misc/echo/echo.c:384:27: warning: equality comparison with
extraneous parentheses [-Wparentheses-equality]
        if ((ec->nonupdate_dwell == 0)) {
             ~~~~~~~~~~~~~~~~~~~~^~~~
drivers/misc/echo/echo.c:384:27: note: remove extraneous parentheses
around the comparison to silence this warning
        if ((ec->nonupdate_dwell == 0)) {
            ~                    ^   ~
drivers/misc/echo/echo.c:384:27: note: use '=' to turn this equality
comparison into an assignment
        if ((ec->nonupdate_dwell == 0)) {
                                 ^~
                                 =
1 warning generated.

Remove them and while we're at it, simplify the zero check as '!var' is
used more than 'var == 0'.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/echo/echo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/echo/echo.c b/drivers/misc/echo/echo.c
index 8a5adc0d2e887..3ebe5d75ad6a2 100644
--- a/drivers/misc/echo/echo.c
+++ b/drivers/misc/echo/echo.c
@@ -381,7 +381,7 @@ int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx)
 	 */
 	ec->factor = 0;
 	ec->shift = 0;
-	if ((ec->nonupdate_dwell == 0)) {
+	if (!ec->nonupdate_dwell) {
 		int p, logp, shift;
 
 		/* Determine:
-- 
2.20.1

[PATCH 4.19 146/146] etnaviv: perfmon: fix total and idle HI cyleces readout

[Greg Kroah-Hartman]

From: Christian Gmeiner <christian.gmeiner@gmail.com>

[ Upstream commit 15ff4a7b584163b12b118a2c381529f05ff3a94d ]

As seen at CodeAurora's linux-imx git repo in imx_4.19.35_1.0.0 branch.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/etnaviv/etnaviv_perfmon.c | 43 +++++++++++++++++------
 1 file changed, 32 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c b/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c
index f86cb66a84b9c..3ce77cbad4ae3 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_perfmon.c
@@ -37,13 +37,6 @@ struct etnaviv_pm_domain_meta {
 	u32 nr_domains;
 };
 
-static u32 simple_reg_read(struct etnaviv_gpu *gpu,
-	const struct etnaviv_pm_domain *domain,
-	const struct etnaviv_pm_signal *signal)
-{
-	return gpu_read(gpu, signal->data);
-}
-
 static u32 perf_reg_read(struct etnaviv_gpu *gpu,
 	const struct etnaviv_pm_domain *domain,
 	const struct etnaviv_pm_signal *signal)
@@ -77,6 +70,34 @@ static u32 pipe_reg_read(struct etnaviv_gpu *gpu,
 	return value;
 }
 
+static u32 hi_total_cycle_read(struct etnaviv_gpu *gpu,
+	const struct etnaviv_pm_domain *domain,
+	const struct etnaviv_pm_signal *signal)
+{
+	u32 reg = VIVS_HI_PROFILE_TOTAL_CYCLES;
+
+	if (gpu->identity.model == chipModel_GC880 ||
+		gpu->identity.model == chipModel_GC2000 ||
+		gpu->identity.model == chipModel_GC2100)
+		reg = VIVS_MC_PROFILE_CYCLE_COUNTER;
+
+	return gpu_read(gpu, reg);
+}
+
+static u32 hi_total_idle_cycle_read(struct etnaviv_gpu *gpu,
+	const struct etnaviv_pm_domain *domain,
+	const struct etnaviv_pm_signal *signal)
+{
+	u32 reg = VIVS_HI_PROFILE_IDLE_CYCLES;
+
+	if (gpu->identity.model == chipModel_GC880 ||
+		gpu->identity.model == chipModel_GC2000 ||
+		gpu->identity.model == chipModel_GC2100)
+		reg = VIVS_HI_PROFILE_TOTAL_CYCLES;
+
+	return gpu_read(gpu, reg);
+}
+
 static const struct etnaviv_pm_domain doms_3d[] = {
 	{
 		.name = "HI",
@@ -86,13 +107,13 @@ static const struct etnaviv_pm_domain doms_3d[] = {
 		.signal = (const struct etnaviv_pm_signal[]) {
 			{
 				"TOTAL_CYCLES",
-				VIVS_HI_PROFILE_TOTAL_CYCLES,
-				&simple_reg_read
+				0,
+				&hi_total_cycle_read
 			},
 			{
 				"IDLE_CYCLES",
-				VIVS_HI_PROFILE_IDLE_CYCLES,
-				&simple_reg_read
+				0,
+				&hi_total_idle_cycle_read
 			},
 			{
 				"AXI_CYCLES_READ_REQUEST_STALLED",
-- 
2.20.1

Re: [PATCH 4.19 003/146] rxrpc: Abstract out the calculation of whether theres Tx space

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1503 bytes --]

Hi!

> Abstract out the calculation of there being sufficient Tx buffer space.
> This is reproduced several times in the rxrpc sendmsg code.

I don't think this is suitable for stable. It does not fix anything.

> +/*
> + * Return true if there's sufficient Tx queue space.
> + */
> +static bool rxrpc_check_tx_space(struct rxrpc_call *call, rxrpc_seq_t *_tx_win)
> +{
> +	unsigned int win_size =
> +		min_t(unsigned int, call->tx_winsize,
> +		      call->cong_cwnd + call->cong_extra);
> +	rxrpc_seq_t tx_win = READ_ONCE(call->tx_hard_ack);
> +
> +	if (_tx_win)
> +		*_tx_win = tx_win;

Plus, this is very very strange. Most callers pass NULL here, so we
do READ_ONCE(call->tx_hard_ack) and it can't be optimized out, and
then we drop the result.

> @@ -72,9 +85,7 @@ static int rxrpc_wait_for_tx_window_nonintr(struct rxrpc_sock *rx,
>  		set_current_state(TASK_UNINTERRUPTIBLE);
>  
>  		tx_win = READ_ONCE(call->tx_hard_ack);
> -		if (call->tx_top - tx_win <
> -		    min_t(unsigned int, call->tx_winsize,
> -			  call->cong_cwnd + call->cong_extra))
> +		if (rxrpc_check_tx_space(call, &tx_win))
>  			return 0;
>  
>  		if (call->state >= RXRPC_CALL_COMPLETE)

And the remaining caller already has right value in tx_win, and it is
discarded and READ again.

This does not make sense.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 003/146] rxrpc: Abstract out the calculation of whether theres Tx space

[Sasha Levin]

On Thu, Apr 16, 2020 at 07:05:15PM +0200, Pavel Machek wrote:
>Hi!
>
>> Abstract out the calculation of there being sufficient Tx buffer space.
>> This is reproduced several times in the rxrpc sendmsg code.
>
>I don't think this is suitable for stable. It does not fix anything.

You're right - I've grabbed it so that I could also take e138aa7d3271
("rxrpc: Fix call interruptibility handling").

-- 
Thanks,
Sasha

Re: [PATCH 4.19 000/146] 4.19.116-rc1 review

[Guenter Roeck]

On 4/16/20 6:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.116 release.
> There are 146 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 18 Apr 2020 13:11:20 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 418 pass: 418 fail: 0

Guenter

Re: [PATCH 4.19 000/146] 4.19.116-rc1 review

[shuah]

On 4/16/20 7:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.116 release.
> There are 146 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 18 Apr 2020 13:11:20 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.116-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.
This one is clean and reboot and poweroff worked just fine.

thanks,
-- Shuah

Re: [PATCH 4.19 000/146] 4.19.116-rc1 review

[Naresh Kamboju]

On Thu, 16 Apr 2020 at 18:56, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.116 release.
> There are 146 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 18 Apr 2020 13:11:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.116-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.19.116-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 287f80e07bbc28d3a2a25d2b53674c912d515376
git describe: v4.19.115-147-g287f80e07bbc
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.115-147-g287f80e07bbc


No regressions (compared to build v4.19.114-55-g3b903e5affcf)

No fixes (compared to build v4.19.114-55-g3b903e5affcf)

Ran 31564 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* linux-log-parser
* ltp-cve-tests
* ltp-dio-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-mm-tests
* ltp-sched-tests
* ltp-syscalls-tests
* perf
* kselftest
* kvm-unit-tests
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* network-basic-tests
* ltp-fs-tests
* ltp-open-posix-tests
* v4l2-compliance
* spectre-meltdown-checker-test
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 000/146] 4.19.116-rc1 review

[Jon Hunter]

On 16/04/2020 14:22, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.116 release.
> There are 146 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 18 Apr 2020 13:11:20 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.116-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h


All tests are passing for Tegra ...

Test results for stable-v4.19:
    11 builds:	11 pass, 0 fail
    22 boots:	22 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.19.116-rc1-g287f80e07bbc
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.19 000/146] 4.19.116-rc1 review

[Jon Hunter]

On 16/04/2020 14:22, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.116 release.
> There are 146 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 18 Apr 2020 13:11:20 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.116-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h


All tests are passing for Tegra ...

Test results for stable-v4.19:
    11 builds:	11 pass, 0 fail
    22 boots:	22 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version:	4.19.116-rc1-g287f80e07bbc
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.19 000/146] 4.19.116-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1188 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.116 release.
> There are 146 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 18 Apr 2020 13:11:20 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.116-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.

CIP project ran tests on this one, and we have de0-nano failure:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/136707029

Detailed results should be at:

https://lava.ciplatform.org/scheduler/job/14716
https://lava.ciplatform.org/scheduler/job/14717

..but those results do not load for me (?).

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 000/146] 4.19.116-rc1 review

[Daniel Díaz]

Hello!

On Fri, 17 Apr 2020 at 07:35, Pavel Machek <pavel@denx.de> wrote:
>
> Hi!
>
> > This is the start of the stable review cycle for the 4.19.116 release.
> > There are 146 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat, 18 Apr 2020 13:11:20 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >       https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.116-rc1.gz
> > or in the git tree and branch at:
> >       git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > and the diffstat can be found below.
>
> CIP project ran tests on this one, and we have de0-nano failure:
>
> https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/136707029
>
> Detailed results should be at:
>
> https://lava.ciplatform.org/scheduler/job/14716
> https://lava.ciplatform.org/scheduler/job/14717
>
> ..but those results do not load for me (?).

Looks like the device failed its health job and went into bad state.
Jobs submitted for that device are still queued, hence the time out.

Greetings!

Daniel Díaz
daniel.diaz@linaro.org

RE: [PATCH 4.19 000/146] 4.19.116-rc1 review

[Chris Paterson]

Hello Pavel,

> From: Daniel Díaz <daniel.diaz@linaro.org>
> Sent: 17 April 2020 14:38
> 
> Hello!
> 
> On Fri, 17 Apr 2020 at 07:35, Pavel Machek <pavel@denx.de> wrote:
> >
> > Hi!
> >
> > > This is the start of the stable review cycle for the 4.19.116 release.
> > > There are 146 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Sat, 18 Apr 2020 13:11:20 +0000.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > >       https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-
> 4.19.116-rc1.gz
> > > or in the git tree and branch at:
> > >       git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> linux-4.19.y
> > > and the diffstat can be found below.
> >
> > CIP project ran tests on this one, and we have de0-nano failure:
> >
> > https://gitlab.com/cip-project/cip-testing/linux-stable-rc-
> ci/pipelines/136707029
> >
> > Detailed results should be at:
> >
> > https://lava.ciplatform.org/scheduler/job/14716
> > https://lava.ciplatform.org/scheduler/job/14717
> >
> > ..but those results do not load for me (?).
> 
> Looks like the device failed its health job and went into bad state.
> Jobs submitted for that device are still queued, hence the time out.

Exactly that (thanks Daniel).

The board is now back online and the submitted jobs have passed.

Kind regards, Chris

> 
> Greetings!
> 
> Daniel Díaz
> daniel.diaz@linaro.org