[PATCH] drm/amd/display: Remove aconnector condition check for dpcd read

[Zhan Liu <zhan.liu@amd.com>]

[Why]
Aconnector is not necessary to be NULL in order to read dpcd
successfully.

Actually if we rely on checking aconnector here, we won't be able
to turn off all displays before doing display detection. That will
cause some MST hubs not able to light up.

[How]
Remove aconnector check when turning off all displays at
hardware initialization stage.

Signed-off-by: Zhan Liu <zhan.liu@amd.com>
---
 .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 36 ++++++++-----------
 1 file changed, 14 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 9f41efddc9bc..6f33f3f0d023 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -1332,31 +1332,23 @@ void dcn10_init_hw(struct dc *dc)
 			if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT)
 				continue;
 
-			/*
-			 * core_link_read_dpcd() will invoke dm_helpers_dp_read_dpcd(),
-			 * which needs to read dpcd info with the help of aconnector.
-			 * If aconnector (dc->links[i]->prev) is NULL, then dpcd status
-			 * cannot be read.
-			 */
-			if (dc->links[i]->priv) {
-				/* if any of the displays are lit up turn them off */
-				status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
-								&dpcd_power_state, sizeof(dpcd_power_state));
-				if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
-					/* blank dp stream before power off receiver*/
-					if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
-						unsigned int fe = dc->links[i]->link_enc->funcs->get_dig_frontend(dc->links[i]->link_enc);
-
-						for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
-							if (fe == dc->res_pool->stream_enc[j]->id) {
-								dc->res_pool->stream_enc[j]->funcs->dp_blank(
-											dc->res_pool->stream_enc[j]);
-								break;
-							}
+			/* if any of the displays are lit up turn them off */
+			status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+							&dpcd_power_state, sizeof(dpcd_power_state));
+			if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
+				/* blank dp stream before power off receiver*/
+				if (dc->links[i]->link_enc->funcs->get_dig_frontend) {
+					unsigned int fe = dc->links[i]->link_enc->funcs->get_dig_frontend(dc->links[i]->link_enc);
+
+					for (j = 0; j < dc->res_pool->stream_enc_count; j++) {
+						if (fe == dc->res_pool->stream_enc[j]->id) {
+							dc->res_pool->stream_enc[j]->funcs->dp_blank(
+										dc->res_pool->stream_enc[j]);
+							break;
 						}
 					}
-					dp_receiver_power_ctrl(dc->links[i], false);
 				}
+				dp_receiver_power_ctrl(dc->links[i], false);
 			}
 		}
 	}
-- 
2.17.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx