All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Robinson <pbrobinson@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH 5/5] Add initial support for the Pinebook Pro laptop from Pine64.
Date: Mon, 20 Apr 2020 20:27:36 +0100	[thread overview]
Message-ID: <20200420192736.962307-6-pbrobinson@gmail.com> (raw)
In-Reply-To: <20200420192736.962307-1-pbrobinson@gmail.com>

Specification:
- Rockchip RK3399
- 4GB Dual-Channel LPDDR4
- eMMC socket
- mSD card slot
- 128Mbit (16Mb) SPI Flash
- AP6256 for 11AC WiFi + BT5
- 14 inch 1920*1080 eDP MiPi display
- Camera
- USB 3.0, 2.0 ports
- Type-C port with alt-mode display (DP 1.2) and 15W charge
- DC 5V/3A
- optional PCIe slot for NVMe SSD drive

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi  | 43 ++++++++++
 arch/arm/mach-rockchip/rk3399/Kconfig         |  8 ++
 board/pine64/pinebook-pro-rk3399/Kconfig      | 15 ++++
 board/pine64/pinebook-pro-rk3399/MAINTAINERS  |  8 ++
 board/pine64/pinebook-pro-rk3399/Makefile     |  1 +
 .../pinebook-pro-rk3399/pinebook-pro-rk3399.c | 76 +++++++++++++++++
 configs/pinebook-pro-rk3399_defconfig         | 84 +++++++++++++++++++
 include/configs/pinebook-pro-rk3399.h         | 29 +++++++
 8 files changed, 264 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
 create mode 100644 board/pine64/pinebook-pro-rk3399/Kconfig
 create mode 100644 board/pine64/pinebook-pro-rk3399/MAINTAINERS
 create mode 100644 board/pine64/pinebook-pro-rk3399/Makefile
 create mode 100644 board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
 create mode 100644 configs/pinebook-pro-rk3399_defconfig
 create mode 100644 include/configs/pinebook-pro-rk3399.h

diff --git a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
new file mode 100644
index 0000000000..1a2e24d3ef
--- /dev/null
+++ b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Peter Robinson <pbrobinson@gmail.com>
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+
+/ {
+	aliases {
+		spi0 = &spi1;
+	};
+
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
+
+&rk808 {
+	u-boot,dm-pre-reloc;
+};
+
+&sdhci {
+	max-frequency = <25000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&sdmmc {
+	max-frequency = <20000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&spiflash {
+	u-boot,dm-pre-reloc;
+};
+
+&vdd_log {
+	regulator-init-microvolt = <950000>;
+};
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
index 927bb62a9f..254b9c5b4d 100644
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -19,6 +19,13 @@ config TARGET_EVB_RK3399
 	  with full function and physical connectors support like Type-C ports,
 	  USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial...
 
+config TARGET_PINEBOOK_PRO_RK3399
+	bool "Pinebook Pro"
+	help
+	  Pinebook Pro is a laptop based on the Rockchip rk3399 SoC
+	  with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
+	  1920*1080 screen and all the usual laptop features.
+
 config TARGET_PUMA_RK3399
 	bool "Theobroma Systems RK3399-Q7 (Puma)"
 	help
@@ -144,6 +151,7 @@ endif # BOOTCOUNT_LIMIT
 
 source "board/firefly/roc-pc-rk3399/Kconfig"
 source "board/google/gru/Kconfig"
+source "board/pine64/pinebook-pro-rk3399/Kconfig"
 source "board/pine64/rockpro64_rk3399/Kconfig"
 source "board/rockchip/evb_rk3399/Kconfig"
 source "board/theobroma-systems/puma_rk3399/Kconfig"
diff --git a/board/pine64/pinebook-pro-rk3399/Kconfig b/board/pine64/pinebook-pro-rk3399/Kconfig
new file mode 100644
index 0000000000..3bb7ca448e
--- /dev/null
+++ b/board/pine64/pinebook-pro-rk3399/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_PINEBOOK_PRO_RK3399
+
+config SYS_BOARD
+	default "pinebook-pro-rk3399"
+
+config SYS_VENDOR
+	default "pine64"
+
+config SYS_CONFIG_NAME
+	default "pinebook-pro-rk3399"
+
+config BOARD_SPECIFIC_OPTIONS
+	def_bool y
+
+endif
diff --git a/board/pine64/pinebook-pro-rk3399/MAINTAINERS b/board/pine64/pinebook-pro-rk3399/MAINTAINERS
new file mode 100644
index 0000000000..7153eaf2e0
--- /dev/null
+++ b/board/pine64/pinebook-pro-rk3399/MAINTAINERS
@@ -0,0 +1,8 @@
+PINEBOOK_PRO
+M:	Peter Robinson <pbrobinson@gmail.com>
+S:	Maintained
+F:	board/pine64/rk3399-pinebook-pro/
+F:	include/configs/rk3399-pinebook-pro.h
+F:	arch/arm/dts/rk3399-pinebook-pro.dts
+F:	arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
+F:	configs/pinebook-pro-rk3399_defconfig
diff --git a/board/pine64/pinebook-pro-rk3399/Makefile b/board/pine64/pinebook-pro-rk3399/Makefile
new file mode 100644
index 0000000000..2f692a12a6
--- /dev/null
+++ b/board/pine64/pinebook-pro-rk3399/Makefile
@@ -0,0 +1 @@
+obj-y	+= pinebook-pro-rk3399.o
diff --git a/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c b/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
new file mode 100644
index 0000000000..01421cbac2
--- /dev/null
+++ b/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2020 Peter Robinson <pbrobinson@gmail.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/misc.h>
+#include <power/regulator.h>
+
+#define GRF_IO_VSEL_BT565_SHIFT 0
+#define PMUGRF_CON0_VSEL_SHIFT 8
+
+#ifndef CONFIG_SPL_BUILD
+int board_early_init_f(void)
+{
+	struct udevice *regulator;
+	int ret;
+
+	ret = regulator_get_by_platname("vcc5v0_usb", &regulator);
+	if (ret) {
+		debug("%s vcc5v0_usb init fail! ret %d\n", __func__, ret);
+		goto out;
+	}
+
+	ret = regulator_set_enable(regulator, true);
+	if (ret)
+		debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__, ret);
+
+out:
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+static void setup_iodomain(void)
+{
+	struct rk3399_grf_regs *grf =
+	   syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	struct rk3399_pmugrf_regs *pmugrf =
+	   syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
+
+	/* BT565 is in 1.8v domain */
+	rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
+
+	/* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
+	rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
+}
+
+int misc_init_r(void)
+{
+	const u32 cpuid_offset = 0x7;
+	const u32 cpuid_length = 0x10;
+	u8 cpuid[cpuid_length];
+	int ret;
+
+	setup_iodomain();
+
+	ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
+	if (ret)
+		return ret;
+
+	ret = rockchip_cpuid_set(cpuid, cpuid_length);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+#endif
diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
new file mode 100644
index 0000000000..0e9f0ec250
--- /dev/null
+++ b/configs/pinebook-pro-rk3399_defconfig
@@ -0,0 +1,84 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_TARGET_PINEBOOK_PRO_RK3399=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb"
+CONFIG_MISC_INIT_R=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_TPL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_USB=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_BOOTDELAY=3
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_EFUSE=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_DM_PMIC_FAN53555=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+# CONFIG_USB_XHCI_ROCKCHIP is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_ROCKCHIP_USB2_PHY=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_EDP=y
diff --git a/include/configs/pinebook-pro-rk3399.h b/include/configs/pinebook-pro-rk3399.h
new file mode 100644
index 0000000000..423d742a79
--- /dev/null
+++ b/include/configs/pinebook-pro-rk3399.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
+ * Copyright (C) 2020 Peter Robinson <pbrobinson@gmail.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __PINEBOOK_PRO_RK3399_H
+#define __PINEBOOK_PRO_RK3399_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+		"stdin=serial,usbkbd\0" \
+		"stdout=serial,vidconsole\0" \
+		"stderr=serial,vidconsole\0"
+
+#include <configs/rk3399_common.h>
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
+#endif
+
+#undef CONFIG_SYS_SPI_U_BOOT_OFFS
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	1024 * 512
+
+#define SDRAM_BANK_SIZE			(2UL << 30)
+
+#endif
-- 
2.26.1

  parent reply	other threads:[~2020-04-20 19:27 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-20 19:27 Support for Pinebook Pro v2 Peter Robinson
2020-04-20 19:27 ` [PATCH 1/5] video: simple_panel: add boe,nv140fhmn49 display Peter Robinson
2020-04-21  1:10   ` Vagrant Cascadian
2020-04-21 16:34     ` Arnaud Patard
2020-04-26 21:11   ` Anatolij Gustschin
2020-04-20 19:27 ` [PATCH 2/5] dt-bindings: input: adopt Linux gpio-keys binding constants Peter Robinson
2020-04-20 19:27 ` [PATCH 3/5] dt-bindings: leds: adopt Linux leds common " Peter Robinson
2020-04-21 17:37   ` Simon Glass
2020-04-22 13:42   ` Arnaud Patard
2020-04-20 19:27 ` [PATCH 4/5] arm: dts: rockchip: Add initial DT for Pinebook Pro Peter Robinson
2020-04-28 14:02   ` Kever Yang
2020-04-20 19:27 ` Peter Robinson [this message]
2020-04-21  1:06   ` [PATCH 5/5] Add initial support for the Pinebook Pro laptop from Pine64 Vagrant Cascadian
2020-04-22 13:49   ` Arnaud Patard
2020-04-28  9:51   ` Kever Yang
2020-04-20 22:49 ` Support for Pinebook Pro v2 Vagrant Cascadian
2020-04-20 23:01   ` Peter Robinson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200420192736.962307-6-pbrobinson@gmail.com \
    --to=pbrobinson@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.