From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Wed, 22 Apr 2020 13:18:11 +0200 Subject: [PATCH V3 3/6] ARM: stm32: Implement board coding on AV96 In-Reply-To: <20200422111814.121060-1-marex@denx.de> References: <20200422111814.121060-1-marex@denx.de> Message-ID: <20200422111814.121060-3-marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The AV96 board does exist in multiple variants. To cater for all of them, implement board code handling. There are two GPIOs which code the type of the board, read them out and use the value to pick the correct device tree from an fitImage. Reviewed-by: Patrick Delaunay Signed-off-by: Marek Vasut Cc: Manivannan Sadhasivam Cc: Patrick Delaunay Cc: Patrice Chotard --- V2: No change V3: Drop dm-pre-reloc and gpio-cells from config node --- arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 1 + .../stm32mp15xx-dhcor-avenger96-u-boot.dtsi | 1 + arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi | 7 +++ board/dhelectronics/dh_stm32mp1/Kconfig | 2 +- board/dhelectronics/dh_stm32mp1/board.c | 61 +++++++++++++++++++ .../dh_stm32mp1/u-boot-dhcom.its | 39 ++++++++++++ .../dh_stm32mp1/u-boot-dhcor.its | 39 ++++++++++++ configs/stm32mp15_dhcom_basic_defconfig | 3 + configs/stm32mp15_dhcor_basic_defconfig | 3 + include/configs/dh_stm32mp1.h | 15 +++++ 10 files changed, 170 insertions(+), 1 deletion(-) create mode 100644 board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its create mode 100644 board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its create mode 100644 include/configs/dh_stm32mp1.h diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 26bd6418c1..fa747f7974 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -23,6 +23,7 @@ u-boot,error-led = "error"; st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>; }; led { diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi index 4207a96618..7ccec95f15 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi @@ -15,6 +15,7 @@ config { u-boot,boot-led = "led1"; u-boot,error-led = "led4"; + dh,board-coding-gpios = <&gpiog 13 0>, <&gpiod 9 0>; }; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi index 298239986f..915c3a8ae7 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi @@ -11,6 +11,13 @@ #include "stm32mp15-u-boot.dtsi" #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" +/ { + u-boot,dm-pre-reloc; + config { + dh,som-coding-gpios = <&gpioz 7 0>, <&gpiof 3 0>; + }; +}; + &i2c4 { u-boot,dm-pre-reloc; }; diff --git a/board/dhelectronics/dh_stm32mp1/Kconfig b/board/dhelectronics/dh_stm32mp1/Kconfig index 8eab986640..0a839f2546 100644 --- a/board/dhelectronics/dh_stm32mp1/Kconfig +++ b/board/dhelectronics/dh_stm32mp1/Kconfig @@ -7,7 +7,7 @@ config SYS_VENDOR default "dhelectronics" config SYS_CONFIG_NAME - default "stm32mp1" + default "dh_stm32mp1" config ENV_SECT_SIZE default 0x10000 if ENV_IS_IN_SPI_FLASH diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c index 322558157e..5193868d7c 100644 --- a/board/dhelectronics/dh_stm32mp1/board.c +++ b/board/dhelectronics/dh_stm32mp1/board.c @@ -133,6 +133,62 @@ int checkboard(void) return 0; } +#ifdef CONFIG_BOARD_EARLY_INIT_F +static u8 brdcode __section("data"); +static u8 somcode __section("data"); + +static void board_get_coding_straps(void) +{ + struct gpio_desc gpio[4]; + ofnode node; + int i, ret; + + node = ofnode_path("/config"); + if (!ofnode_valid(node)) { + printf("%s: no /config node?\n", __func__); + return; + } + + brdcode = 0; + somcode = 0; + + ret = gpio_request_list_by_name_nodev(node, "dh,som-coding-gpios", + gpio, ARRAY_SIZE(gpio), + GPIOD_IS_IN); + for (i = 0; i < ret; i++) + somcode |= !!dm_gpio_get_value(&(gpio[i])) << i; + + ret = gpio_request_list_by_name_nodev(node, "dh,board-coding-gpios", + gpio, ARRAY_SIZE(gpio), + GPIOD_IS_IN); + for (i = 0; i < ret; i++) + brdcode |= !!dm_gpio_get_value(&(gpio[i])) << i; + + printf("Code: SoM:rev=%d Board:rev=%d\n", somcode, brdcode); +} + +int board_early_init_f(void) +{ + board_get_coding_straps(); + + return 0; +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + char test[20]; + + snprintf(test, sizeof(test), "somrev%d_boardrev%d", somcode, brdcode); + + if (!strcmp(name, test)) + return 0; + + return -EINVAL; +} +#endif +#endif + static void board_key_check(void) { #if defined(CONFIG_FASTBOOT) || defined(CONFIG_CMD_STM32PROG) @@ -478,6 +534,11 @@ int board_late_init(void) if (!strcmp(boot_device, "serial") || !strcmp(boot_device, "usb")) env_set("bootdelay", "0"); +#ifdef CONFIG_BOARD_EARLY_INIT_F + env_set_ulong("dh_som_rev", somcode); + env_set_ulong("dh_board_rev", brdcode); +#endif + return 0; } diff --git a/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its b/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its new file mode 100644 index 0000000000..a4574ea135 --- /dev/null +++ b/board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its @@ -0,0 +1,39 @@ +/dts-v1/; + +/ { + description = "U-Boot mainline"; + #address-cells = <1>; + + images { + uboot { + description = "U-Boot (32-bit)"; + data = /incbin/("../../../u-boot-nodtb.bin"); + type = "standalone"; + os = "U-Boot"; + arch = "arm"; + compression = "none"; + load = <0xc0100000>; + entry = <0xc0100000>; + }; + + fdt-1 { + description = ".dtb"; + data = /incbin/("../../../arch/arm/dts/stm32mp15xx-dhcom-pdk2.dtb"); + type = "flat_dt"; + arch = "arm"; + compression = "none"; + }; + }; + + configurations { + default = "config-1"; + + config-1 { + description = "somrev0_boardrev0"; /* SoM+board model */ + loadables = "uboot"; + fdt = "fdt-1"; + }; + + /* Add 587-100..587-400 with fdt-2..fdt-4 here */ + }; +}; diff --git a/board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its b/board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its new file mode 100644 index 0000000000..0a8b6ac857 --- /dev/null +++ b/board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its @@ -0,0 +1,39 @@ +/dts-v1/; + +/ { + description = "U-Boot mainline"; + #address-cells = <1>; + + images { + uboot { + description = "U-Boot (32-bit)"; + data = /incbin/("../../../u-boot-nodtb.bin"); + type = "standalone"; + os = "U-Boot"; + arch = "arm"; + compression = "none"; + load = <0xc0100000>; + entry = <0xc0100000>; + }; + + fdt-1 { + description = ".dtb"; + data = /incbin/("../../../arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtb"); + type = "flat_dt"; + arch = "arm"; + compression = "none"; + }; + }; + + configurations { + default = "config-1"; + + config-1 { + description = "somrev0_boardrev1"; /* SoM+board model */ + loadables = "uboot"; + fdt = "fdt-1"; + }; + + /* Add 586-200..586-400 with fdt-2..fdt-4 here */ + }; +}; diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 40afef2ece..58c15fb582 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -11,7 +11,10 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_TEXT_BASE=0x2FFC2500 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its" CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_I2C_SUPPORT=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 4a968609fe..e75ed1a932 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -11,7 +11,10 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_TEXT_BASE=0x2FFC2500 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its" CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_I2C_SUPPORT=y diff --git a/include/configs/dh_stm32mp1.h b/include/configs/dh_stm32mp1.h new file mode 100644 index 0000000000..89d317ba2b --- /dev/null +++ b/include/configs/dh_stm32mp1.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ +/* + * Copyright (C) 2020 Marek Vasut + * + * Configuration settings for the DH STM32MP15x SoMs + */ + +#ifndef __CONFIG_DH_STM32MP1_H__ +#define __CONFIG_DH_STM32MP1_H__ + +#include + +#define CONFIG_SPL_TARGET "u-boot.itb" + +#endif -- 2.25.1