All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wen Gong <wgong@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, wgong@codeaurora.org
Subject: [PATCH 1/4] ath10k: enable firmware peer stats info for wmi tlv
Date: Thu, 23 Apr 2020 17:18:53 +0800	[thread overview]
Message-ID: <20200423091856.24297-2-wgong@codeaurora.org> (raw)
In-Reply-To: <20200423091856.24297-1-wgong@codeaurora.org>

For wmi tlv type, firmware disable peer stats info by default, after
enable it, firmware will report WMI_TLV_PEER_STATS_INFO_EVENTID if
ath10k send WMI_TLV_REQUEST_PEER_STATS_INFO_CMDID to firmware.

Enable it will only set a flag in firmware, firmware will not report
it without receive request WMI command.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/mac.c     | 5 +++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 1 +
 drivers/net/wireless/ath/ath10k/wmi.h     | 1 +
 4 files changed, 8 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 6791c0035be0..47fd5035f000 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2959,6 +2959,11 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 	arvif->aid = bss_conf->aid;
 	ether_addr_copy(arvif->bssid, bss_conf->bssid);
 
+	ret = ath10k_wmi_pdev_set_param(ar,
+					ar->wmi.pdev_param->peer_stats_info_enable, 1);
+	if (ret)
+		ath10k_warn(ar, "failed to enable peer stats info: %d\n", ret);
+
 	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid);
 	if (ret) {
 		ath10k_warn(ar, "failed to set vdev %d up: %d\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index e1ab900f2662..27aaa48615d2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -4269,6 +4269,7 @@ static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = {
 	.arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED,
 	.rfkill_config = WMI_TLV_PDEV_PARAM_HW_RFKILL_CONFIG,
 	.rfkill_enable = WMI_TLV_PDEV_PARAM_RFKILL_ENABLE,
+	.peer_stats_info_enable = WMI_TLV_PDEV_PARAM_PEER_STATS_INFO_ENABLE,
 };
 
 static struct wmi_peer_param_map wmi_tlv_peer_param_map = {
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 4972dc12991c..cd400b19a64d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -451,6 +451,7 @@ enum wmi_tlv_pdev_param {
 	WMI_TLV_PDEV_PARAM_VDEV_RATE_STATS_UPDATE_PERIOD,
 	WMI_TLV_PDEV_PARAM_TXPOWER_REASON_NONE,
 	WMI_TLV_PDEV_PARAM_TXPOWER_REASON_SAR,
+	WMI_TLV_PDEV_PARAM_PEER_STATS_INFO_ENABLE = 0x8b,
 	WMI_TLV_PDEV_PARAM_TXPOWER_REASON_MAX,
 };
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 209070714d1a..46740e16f3ce 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3798,6 +3798,7 @@ struct wmi_pdev_param_map {
 	u32 enable_btcoex;
 	u32 rfkill_config;
 	u32 rfkill_enable;
+	u32 peer_stats_info_enable;
 };
 
 #define WMI_PDEV_PARAM_UNSUPPORTED 0
-- 
2.23.0

WARNING: multiple messages have this Message-ID (diff)
From: Wen Gong <wgong@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, wgong@codeaurora.org
Subject: [PATCH 1/4] ath10k: enable firmware peer stats info for wmi tlv
Date: Thu, 23 Apr 2020 17:18:53 +0800	[thread overview]
Message-ID: <20200423091856.24297-2-wgong@codeaurora.org> (raw)
In-Reply-To: <20200423091856.24297-1-wgong@codeaurora.org>

For wmi tlv type, firmware disable peer stats info by default, after
enable it, firmware will report WMI_TLV_PEER_STATS_INFO_EVENTID if
ath10k send WMI_TLV_REQUEST_PEER_STATS_INFO_CMDID to firmware.

Enable it will only set a flag in firmware, firmware will not report
it without receive request WMI command.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/mac.c     | 5 +++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 1 +
 drivers/net/wireless/ath/ath10k/wmi.h     | 1 +
 4 files changed, 8 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 6791c0035be0..47fd5035f000 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2959,6 +2959,11 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 	arvif->aid = bss_conf->aid;
 	ether_addr_copy(arvif->bssid, bss_conf->bssid);
 
+	ret = ath10k_wmi_pdev_set_param(ar,
+					ar->wmi.pdev_param->peer_stats_info_enable, 1);
+	if (ret)
+		ath10k_warn(ar, "failed to enable peer stats info: %d\n", ret);
+
 	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid);
 	if (ret) {
 		ath10k_warn(ar, "failed to set vdev %d up: %d\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index e1ab900f2662..27aaa48615d2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -4269,6 +4269,7 @@ static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = {
 	.arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED,
 	.rfkill_config = WMI_TLV_PDEV_PARAM_HW_RFKILL_CONFIG,
 	.rfkill_enable = WMI_TLV_PDEV_PARAM_RFKILL_ENABLE,
+	.peer_stats_info_enable = WMI_TLV_PDEV_PARAM_PEER_STATS_INFO_ENABLE,
 };
 
 static struct wmi_peer_param_map wmi_tlv_peer_param_map = {
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 4972dc12991c..cd400b19a64d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -451,6 +451,7 @@ enum wmi_tlv_pdev_param {
 	WMI_TLV_PDEV_PARAM_VDEV_RATE_STATS_UPDATE_PERIOD,
 	WMI_TLV_PDEV_PARAM_TXPOWER_REASON_NONE,
 	WMI_TLV_PDEV_PARAM_TXPOWER_REASON_SAR,
+	WMI_TLV_PDEV_PARAM_PEER_STATS_INFO_ENABLE = 0x8b,
 	WMI_TLV_PDEV_PARAM_TXPOWER_REASON_MAX,
 };
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 209070714d1a..46740e16f3ce 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3798,6 +3798,7 @@ struct wmi_pdev_param_map {
 	u32 enable_btcoex;
 	u32 rfkill_config;
 	u32 rfkill_enable;
+	u32 peer_stats_info_enable;
 };
 
 #define WMI_PDEV_PARAM_UNSUPPORTED 0
-- 
2.23.0

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  reply	other threads:[~2020-04-23  9:19 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-23  9:18 [PATCH 0/4] ath10k: sdio: add support for rx/tx bitrate reporting Wen Gong
2020-04-23  9:18 ` Wen Gong
2020-04-23  9:18 ` Wen Gong [this message]
2020-04-23  9:18   ` [PATCH 1/4] ath10k: enable firmware peer stats info for wmi tlv Wen Gong
2020-04-27  5:21   ` Kalle Valo
2020-04-27  5:21   ` Kalle Valo
2020-04-23  9:18 ` [PATCH 2/4] ath10k: add rx bitrate report for SDIO Wen Gong
2020-04-23  9:18   ` Wen Gong
2020-04-23  9:18 ` [PATCH 3/4] ath10k: add bitrate parse for peer stats info Wen Gong
2020-04-23  9:18   ` Wen Gong
2020-04-23  9:18 ` [PATCH 4/4] ath10k: correct tx bitrate of iw for SDIO Wen Gong
2020-04-23  9:18   ` Wen Gong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200423091856.24297-2-wgong@codeaurora.org \
    --to=wgong@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.