All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alim Akhtar <alim.akhtar@samsung.com>
To: robh@kernel.org
Cc: devicetree@vger.kernel.org, linux-scsi@vger.kernel.org,
	krzk@kernel.org, avri.altman@wdc.com, martin.petersen@oracle.com,
	kwmad.kim@samsung.com, stanley.chu@mediatek.com,
	cang@codeaurora.org, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Kishon Vijay Abraham I <kishon@ti.com>
Subject: [PATCH v7 07/10] phy: samsung-ufs: add UFS PHY driver for samsung SoC
Date: Sun, 26 Apr 2020 23:00:21 +0530	[thread overview]
Message-ID: <20200426173024.63069-8-alim.akhtar@samsung.com> (raw)
In-Reply-To: <20200426173024.63069-1-alim.akhtar@samsung.com>

This patch introduces Samsung UFS PHY driver. This driver
supports to deal with phy calibration and power control
according to UFS host driver's behavior.

Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Seungwon Jeon <essuuj@gmail.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
 drivers/phy/samsung/Kconfig           |   9 +
 drivers/phy/samsung/Makefile          |   1 +
 drivers/phy/samsung/phy-exynos7-ufs.h |  85 ++++++
 drivers/phy/samsung/phy-samsung-ufs.c | 369 ++++++++++++++++++++++++++
 drivers/phy/samsung/phy-samsung-ufs.h | 142 ++++++++++
 5 files changed, 606 insertions(+)
 create mode 100644 drivers/phy/samsung/phy-exynos7-ufs.h
 create mode 100644 drivers/phy/samsung/phy-samsung-ufs.c
 create mode 100644 drivers/phy/samsung/phy-samsung-ufs.h

diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index 9e483d1fdaf2..fc1e3c17f842 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -29,6 +29,15 @@ config PHY_EXYNOS_PCIE
 	  Enable PCIe PHY support for Exynos SoC series.
 	  This driver provides PHY interface for Exynos PCIe controller.
 
+config PHY_SAMSUNG_UFS
+	tristate "SAMSUNG SoC series UFS PHY driver"
+	depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Enable this to support the Samsung UFS PHY driver for
+	  Samsung SoCs. This driver provides the interface for UFS
+	  host controller to do PHY related programming.
+
 config PHY_SAMSUNG_USB2
 	tristate "Samsung USB 2.0 PHY driver"
 	depends on HAS_IOMEM
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
index db9b1aa0de6e..3959100fe8a2 100644
--- a/drivers/phy/samsung/Makefile
+++ b/drivers/phy/samsung/Makefile
@@ -2,6 +2,7 @@
 obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
 obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
 obj-$(CONFIG_PHY_EXYNOS_PCIE)		+= phy-exynos-pcie.o
+obj-$(CONFIG_PHY_SAMSUNG_UFS)		+= phy-samsung-ufs.o
 obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
 phy-exynos-usb2-y			+= phy-samsung-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2)	+= phy-exynos4210-usb2.o
diff --git a/drivers/phy/samsung/phy-exynos7-ufs.h b/drivers/phy/samsung/phy-exynos7-ufs.h
new file mode 100644
index 000000000000..da981c1ac040
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos7-ufs.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS PHY driver data for Samsung EXYNOS7 SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ */
+#ifndef _PHY_EXYNOS7_UFS_H_
+#define _PHY_EXYNOS7_UFS_H_
+
+#include "phy-samsung-ufs.h"
+
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL	0x720
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK	0x1
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN	BIT(0)
+
+/* Calibration for phy initialization */
+static const struct samsung_ufs_phy_cfg exynos7_pre_init_cfg[] = {
+	PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY),
+	PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY),
+	PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY),
+	PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY),
+	END_UFS_PHY_CFG
+};
+
+static const struct samsung_ufs_phy_cfg exynos7_post_init_cfg[] = {
+	END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B */
+static const struct samsung_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = {
+	PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY),
+	PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY),
+	PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY),
+	/* Setting order: 1st(0x16, 2nd(0x15) */
+	PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY),
+	PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY),
+	PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A),
+	PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B),
+	PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A),
+	PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B),
+	PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A),
+	PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B),
+	END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B atfer PMC */
+static const struct samsung_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = {
+	PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY),
+	END_UFS_PHY_CFG
+};
+
+static const struct samsung_ufs_phy_cfg *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = {
+	[CFG_PRE_INIT]		= exynos7_pre_init_cfg,
+	[CFG_POST_INIT]		= exynos7_post_init_cfg,
+	[CFG_PRE_PWR_HS]	= exynos7_pre_pwr_hs_cfg,
+	[CFG_POST_PWR_HS]	= exynos7_post_pwr_hs_cfg,
+};
+
+static struct samsung_ufs_phy_drvdata exynos7_ufs_phy = {
+	.cfg = exynos7_ufs_phy_cfgs,
+	.isol = {
+		.offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL,
+		.mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK,
+		.en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN,
+	},
+};
+
+#endif /* _PHY_EXYNOS7_UFS_H_ */
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
new file mode 100644
index 000000000000..4c8334bba3e9
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver for Samsung SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@gmail.com>
+ * Author: Alim Akhtar <alim.akhtar@samsung.com>
+ *
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "phy-samsung-ufs.h"
+
+#define for_each_phy_lane(phy, i) \
+	for (i = 0; i < (phy)->lane_cnt; i++)
+#define for_each_phy_cfg(cfg) \
+	for (; (cfg)->id; (cfg)++)
+
+#define PHY_DEF_LANE_CNT	1
+
+static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy,
+			const struct samsung_ufs_phy_cfg *cfg, u8 lane)
+{
+	enum {LANE_0, LANE_1}; /* lane index */
+
+	switch (lane) {
+	case LANE_0:
+		writel(cfg->val, (phy)->reg_pma + cfg->off_0);
+		break;
+	case LANE_1:
+		if (cfg->id == PHY_TRSV_BLK)
+			writel(cfg->val, (phy)->reg_pma + cfg->off_1);
+		break;
+	}
+}
+
+int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy)
+{
+	struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+	const unsigned int timeout_us = 100000;
+	const unsigned int sleep_us = 10;
+	u32 val;
+	int err;
+
+	err = readl_poll_timeout(
+			ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
+			val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
+	if (err) {
+		dev_err(ufs_phy->dev,
+			"failed to get phy pll lock acquisition %d\n", err);
+		goto out;
+	}
+
+	err = readl_poll_timeout(
+			ufs_phy->reg_pma + PHY_APB_ADDR(PHY_CDR_LOCK_STATUS),
+			val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
+	if (err) {
+		dev_err(ufs_phy->dev,
+			"failed to get phy cdr lock acquisition %d\n", err);
+		goto out;
+	}
+
+out:
+	return err;
+}
+
+int samsung_ufs_phy_calibrate(struct phy *phy)
+{
+	struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+	struct samsung_ufs_phy_cfg **cfgs = ufs_phy->cfg;
+	const struct samsung_ufs_phy_cfg *cfg;
+	int i;
+	int err = 0;
+
+	if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT ||
+		     ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) {
+		dev_err(ufs_phy->dev, "invalid phy config index %d\n",
+							ufs_phy->ufs_phy_state);
+		return -EINVAL;
+	}
+
+	if (ufs_phy->is_pre_init)
+		ufs_phy->is_pre_init = false;
+	if (ufs_phy->is_post_init) {
+		ufs_phy->is_post_init = false;
+		ufs_phy->ufs_phy_state = CFG_POST_INIT;
+	}
+	if (ufs_phy->is_pre_pmc) {
+		ufs_phy->is_pre_pmc = false;
+		ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS;
+	}
+	if (ufs_phy->is_post_pmc) {
+		ufs_phy->is_post_pmc = false;
+		ufs_phy->ufs_phy_state = CFG_POST_PWR_HS;
+	}
+
+	switch (ufs_phy->ufs_phy_state) {
+	case CFG_PRE_INIT:
+		ufs_phy->is_post_init = true;
+		break;
+	case CFG_POST_INIT:
+		ufs_phy->is_pre_pmc = true;
+		break;
+	case CFG_PRE_PWR_HS:
+		ufs_phy->is_post_pmc = true;
+		break;
+	case CFG_POST_PWR_HS:
+		break;
+	default:
+		dev_err(ufs_phy->dev, "wrong state for phy calibration\n");
+	}
+
+	cfg = cfgs[ufs_phy->ufs_phy_state];
+	if (!cfg)
+		goto out;
+
+	for_each_phy_cfg(cfg) {
+		for_each_phy_lane(ufs_phy, i) {
+			samsung_ufs_phy_config(ufs_phy, cfg, i);
+		}
+	}
+
+	if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS)
+		err = samsung_ufs_phy_wait_for_lock_acq(phy);
+out:
+	return err;
+}
+
+static int samsung_ufs_phy_symbol_clk_init(struct samsung_ufs_phy *phy)
+{
+	struct clk *clk;
+	int ret = 0;
+
+	clk = devm_clk_get(phy->dev, "tx0_symbol_clk");
+	if (IS_ERR(clk)) {
+		dev_err(phy->dev, "failed to get tx0_symbol_clk clock\n");
+		goto out;
+	} else {
+		phy->tx0_symbol_clk = clk;
+	}
+
+	clk = devm_clk_get(phy->dev, "rx0_symbol_clk");
+	if (IS_ERR(clk)) {
+		dev_err(phy->dev, "failed to get rx0_symbol_clk clock\n");
+		goto out;
+	} else {
+		phy->rx0_symbol_clk = clk;
+	}
+
+	clk = devm_clk_get(phy->dev, "rx1_symbol_clk");
+	if (IS_ERR(clk)) {
+		dev_err(phy->dev, "failed to get rx1_symbol_clk clock\n");
+		goto out;
+	} else {
+		phy->rx1_symbol_clk = clk;
+	}
+
+	ret = clk_prepare_enable(phy->tx0_symbol_clk);
+	if (ret) {
+		dev_err(phy->dev, "%s: tx0_symbol_clk enable failed %d\n",
+				__func__, ret);
+		goto out;
+	}
+	ret = clk_prepare_enable(phy->rx0_symbol_clk);
+	if (ret) {
+		dev_err(phy->dev, "%s: rx0_symbol_clk enable failed %d\n",
+				__func__, ret);
+		goto out;
+	}
+	ret = clk_prepare_enable(phy->rx1_symbol_clk);
+	if (ret) {
+		dev_err(phy->dev, "%s: rx1_symbol_clk enable failed %d\n",
+				__func__, ret);
+		goto out;
+	}
+out:
+	return ret;
+}
+
+static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy)
+{
+	struct clk *phy_ref_clk;
+	int ret;
+
+	phy_ref_clk = devm_clk_get(phy->dev, "ref_clk");
+	if (IS_ERR(phy_ref_clk))
+		dev_err(phy->dev, "failed to get ref_clk clock\n");
+	else
+		phy->ref_clk = phy_ref_clk;
+
+	ret = clk_prepare_enable(phy->ref_clk);
+	if (ret) {
+		dev_err(phy->dev, "%s: ref_clk enable failed %d\n",
+				__func__, ret);
+		return ret;
+	}
+
+	dev_info(phy->dev, "UFS MPHY ref_clk_rate = %ld\n", clk_get_rate(phy_ref_clk));
+
+	return 0;
+}
+
+static int samsung_ufs_phy_init(struct phy *phy)
+{
+	struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(phy);
+	int ret;
+
+	_phy->lane_cnt = phy->attrs.bus_width;
+	_phy->ufs_phy_state = CFG_PRE_INIT;
+
+	_phy->is_pre_init = true;
+	_phy->is_post_init = false;
+	_phy->is_pre_pmc = false;
+	_phy->is_post_pmc = false;
+
+
+	if (of_device_is_compatible(_phy->dev->of_node,
+				"samsung,exynos7-ufs-phy")) {
+		ret = samsung_ufs_phy_symbol_clk_init(_phy);
+		if (ret)
+			dev_err(_phy->dev,
+				"failed to set ufs phy symbol clocks\n");
+	}
+
+	ret = samsung_ufs_phy_clks_init(_phy);
+	if (ret)
+		dev_err(_phy->dev, "failed to set ufs phy  clocks\n");
+
+	samsung_ufs_phy_calibrate(phy);
+
+	return 0;
+}
+
+static int samsung_ufs_phy_power_on(struct phy *phy)
+{
+	struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(phy);
+
+	samsung_ufs_phy_ctrl_isol(_phy, false);
+	return 0;
+}
+
+static int samsung_ufs_phy_power_off(struct phy *phy)
+{
+	struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(phy);
+
+	samsung_ufs_phy_ctrl_isol(_phy, true);
+	clk_disable_unprepare(_phy->ref_clk);
+	return 0;
+}
+
+static int samsung_ufs_phy_set_mode(struct phy *generic_phy,
+					enum phy_mode mode, int submode)
+{
+	struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(generic_phy);
+
+	_phy->mode = PHY_MODE_INVALID;
+
+	if (mode > 0)
+		_phy->mode = mode;
+
+	return 0;
+}
+
+static struct phy_ops samsung_ufs_phy_ops = {
+	.init		= samsung_ufs_phy_init,
+	.power_on	= samsung_ufs_phy_power_on,
+	.power_off	= samsung_ufs_phy_power_off,
+	.calibrate	= samsung_ufs_phy_calibrate,
+	.set_mode	= samsung_ufs_phy_set_mode,
+}
+;
+static const struct of_device_id samsung_ufs_phy_match[];
+
+static int samsung_ufs_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	const struct of_device_id *match;
+	struct samsung_ufs_phy *phy;
+	struct phy *gen_phy;
+	struct phy_provider *phy_provider;
+	const struct samsung_ufs_phy_drvdata *drvdata;
+	int err = 0;
+
+	match = of_match_node(samsung_ufs_phy_match, dev->of_node);
+	if (!match) {
+		err = -EINVAL;
+		dev_err(dev, "failed to get match_node\n");
+		goto out;
+	}
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy-pma");
+	phy->reg_pma = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->reg_pma)) {
+		err = PTR_ERR(phy->reg_pma);
+		goto out;
+	}
+
+	phy->reg_pmu = syscon_regmap_lookup_by_phandle(
+				dev->of_node, "samsung,pmu-syscon");
+	if (IS_ERR(phy->reg_pmu)) {
+		err = PTR_ERR(phy->reg_pmu);
+		dev_err(dev, "failed syscon remap for pmu\n");
+		goto out;
+	}
+
+	gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops);
+	if (IS_ERR(gen_phy)) {
+		err = PTR_ERR(gen_phy);
+		dev_err(dev, "failed to create PHY for ufs-phy\n");
+		goto out;
+	}
+
+	drvdata = match->data;
+	phy->dev = dev;
+	phy->drvdata = drvdata;
+	phy->cfg = (struct samsung_ufs_phy_cfg **)drvdata->cfg;
+	phy->isol = &drvdata->isol;
+	phy->lane_cnt = PHY_DEF_LANE_CNT;
+
+	phy_set_drvdata(gen_phy, phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		err = PTR_ERR(phy_provider);
+		dev_err(dev, "failed to register phy-provider\n");
+		goto out;
+	}
+out:
+	return err;
+}
+
+static const struct of_device_id samsung_ufs_phy_match[] = {
+	{
+		.compatible = "samsung,exynos7-ufs-phy",
+		.data = &exynos7_ufs_phy,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match);
+
+static struct platform_driver samsung_ufs_phy_driver = {
+	.probe  = samsung_ufs_phy_probe,
+	.driver = {
+		.name = "samsung-ufs-phy",
+		.of_match_table = samsung_ufs_phy_match,
+	},
+};
+module_platform_driver(samsung_ufs_phy_driver);
+MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver");
+MODULE_AUTHOR("Seungwon Jeon <essuuj@gmail.com>");
+MODULE_AUTHOR("Alim Akhtar <alim.akhtar@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
new file mode 100644
index 000000000000..27dc1b573469
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-ufs.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS PHY driver for Samsung EXYNOS SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@gmail.com>
+ * Author: Alim Akhtar <alim.akhtar@samsung.com>
+ *
+ */
+#ifndef _PHY_SAMSUNG_UFS_
+#define _PHY_SAMSUNG_UFS_
+
+#define PHY_COMN_BLK	1
+#define PHY_TRSV_BLK	2
+#define END_UFS_PHY_CFG { 0 }
+#define PHY_TRSV_CH_OFFSET	0x30
+#define PHY_APB_ADDR(off)	((off) << 2)
+
+#define PHY_COMN_REG_CFG(o, v, d) {	\
+	.off_0 = PHY_APB_ADDR((o)),	\
+	.off_1 = 0,		\
+	.val = (v),		\
+	.desc = (d),		\
+	.id = PHY_COMN_BLK,	\
+}
+
+#define PHY_TRSV_REG_CFG(o, v, d) {	\
+	.off_0 = PHY_APB_ADDR((o)),	\
+	.off_1 = PHY_APB_ADDR((o) + PHY_TRSV_CH_OFFSET),	\
+	.val = (v),		\
+	.desc = (d),		\
+	.id = PHY_TRSV_BLK,	\
+}
+
+/* UFS PHY registers */
+#define PHY_PLL_LOCK_STATUS	0x1e
+#define PHY_CDR_LOCK_STATUS	0x5e
+
+#define PHY_PLL_LOCK_BIT	BIT(5)
+#define PHY_CDR_LOCK_BIT	BIT(4)
+
+/* description for PHY calibration */
+enum {
+	/* applicable to any */
+	PWR_DESC_ANY	= 0,
+	/* mode */
+	PWR_DESC_PWM	= 1,
+	PWR_DESC_HS	= 2,
+	/* series */
+	PWR_DESC_SER_A	= 1,
+	PWR_DESC_SER_B	= 2,
+	/* gear */
+	PWR_DESC_G1	= 1,
+	PWR_DESC_G2	= 2,
+	PWR_DESC_G3	= 3,
+	/* field mask */
+	MD_MASK		= 0x3,
+	SR_MASK		= 0x3,
+	GR_MASK		= 0x7,
+};
+
+#define PWR_MODE_HS_G1_ANY	PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_ANY)
+#define PWR_MODE_HS_G1_SER_A	PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G1_SER_B	PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G2_ANY	PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_ANY)
+#define PWR_MODE_HS_G2_SER_A	PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G2_SER_B	PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G3_ANY	PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_ANY)
+#define PWR_MODE_HS_G3_SER_A	PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G3_SER_B	PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_B)
+#define PWR_MODE(g, s, m)	((((g) & GR_MASK) << 4) |\
+				 (((s) & SR_MASK) << 2) | ((m) & MD_MASK))
+#define PWR_MODE_PWM_ANY	PWR_MODE(PWR_DESC_ANY,\
+					 PWR_DESC_ANY, PWR_DESC_PWM)
+#define PWR_MODE_HS(g, s)	((((g) & GR_MASK) << 4) |\
+				 (((s) & SR_MASK) << 2) | PWR_DESC_HS)
+#define PWR_MODE_HS_ANY		PWR_MODE(PWR_DESC_ANY,\
+					 PWR_DESC_ANY, PWR_DESC_HS)
+#define PWR_MODE_ANY		PWR_MODE(PWR_DESC_ANY,\
+					 PWR_DESC_ANY, PWR_DESC_ANY)
+/* PHY calibration point/state */
+enum {
+	CFG_PRE_INIT,
+	CFG_POST_INIT,
+	CFG_PRE_PWR_HS,
+	CFG_POST_PWR_HS,
+	CFG_TAG_MAX,
+};
+
+struct samsung_ufs_phy_cfg {
+	u32 off_0;
+	u32 off_1;
+	u32 val;
+	u8 desc;
+	u8 id;
+};
+
+struct samsung_ufs_phy_drvdata {
+	const struct samsung_ufs_phy_cfg **cfg;
+	struct pmu_isol {
+		u32 offset;
+		u32 mask;
+		u32 en;
+	} isol;
+};
+
+struct samsung_ufs_phy {
+	struct device *dev;
+	void __iomem *reg_pma;
+	struct regmap *reg_pmu;
+	struct clk *ref_clk;
+	struct clk *ref_clk_parent;
+	struct clk *tx0_symbol_clk;
+	struct clk *rx0_symbol_clk;
+	struct clk *rx1_symbol_clk;
+	const struct samsung_ufs_phy_drvdata *drvdata;
+	struct samsung_ufs_phy_cfg **cfg;
+	const struct pmu_isol *isol;
+	u8 lane_cnt;
+	int ufs_phy_state;
+	enum phy_mode mode;
+	bool is_pre_init;
+	bool is_post_init;
+	bool is_pre_pmc;
+	bool is_post_pmc;
+};
+
+static inline struct samsung_ufs_phy *get_samsung_ufs_phy(struct phy *phy)
+{
+	return (struct samsung_ufs_phy *)phy_get_drvdata(phy);
+}
+
+static inline void samsung_ufs_phy_ctrl_isol(
+		struct samsung_ufs_phy *phy, u32 isol)
+{
+	regmap_update_bits(phy->reg_pmu, phy->isol->offset,
+			phy->isol->mask, isol ? 0 : phy->isol->en);
+}
+
+#include "phy-exynos7-ufs.h"
+
+#endif /* _PHY_SAMSUNG_UFS_ */
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Alim Akhtar <alim.akhtar@samsung.com>
To: robh@kernel.org
Cc: devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	linux-scsi@vger.kernel.org, martin.petersen@oracle.com,
	Kishon Vijay Abraham I <kishon@ti.com>,
	linux-kernel@vger.kernel.org, krzk@kernel.org,
	kwmad.kim@samsung.com, avri.altman@wdc.com, cang@codeaurora.org,
	Alim Akhtar <alim.akhtar@samsung.com>,
	stanley.chu@mediatek.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 07/10] phy: samsung-ufs: add UFS PHY driver for samsung SoC
Date: Sun, 26 Apr 2020 23:00:21 +0530	[thread overview]
Message-ID: <20200426173024.63069-8-alim.akhtar@samsung.com> (raw)
In-Reply-To: <20200426173024.63069-1-alim.akhtar@samsung.com>

This patch introduces Samsung UFS PHY driver. This driver
supports to deal with phy calibration and power control
according to UFS host driver's behavior.

Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Seungwon Jeon <essuuj@gmail.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
 drivers/phy/samsung/Kconfig           |   9 +
 drivers/phy/samsung/Makefile          |   1 +
 drivers/phy/samsung/phy-exynos7-ufs.h |  85 ++++++
 drivers/phy/samsung/phy-samsung-ufs.c | 369 ++++++++++++++++++++++++++
 drivers/phy/samsung/phy-samsung-ufs.h | 142 ++++++++++
 5 files changed, 606 insertions(+)
 create mode 100644 drivers/phy/samsung/phy-exynos7-ufs.h
 create mode 100644 drivers/phy/samsung/phy-samsung-ufs.c
 create mode 100644 drivers/phy/samsung/phy-samsung-ufs.h

diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index 9e483d1fdaf2..fc1e3c17f842 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -29,6 +29,15 @@ config PHY_EXYNOS_PCIE
 	  Enable PCIe PHY support for Exynos SoC series.
 	  This driver provides PHY interface for Exynos PCIe controller.
 
+config PHY_SAMSUNG_UFS
+	tristate "SAMSUNG SoC series UFS PHY driver"
+	depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Enable this to support the Samsung UFS PHY driver for
+	  Samsung SoCs. This driver provides the interface for UFS
+	  host controller to do PHY related programming.
+
 config PHY_SAMSUNG_USB2
 	tristate "Samsung USB 2.0 PHY driver"
 	depends on HAS_IOMEM
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
index db9b1aa0de6e..3959100fe8a2 100644
--- a/drivers/phy/samsung/Makefile
+++ b/drivers/phy/samsung/Makefile
@@ -2,6 +2,7 @@
 obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
 obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
 obj-$(CONFIG_PHY_EXYNOS_PCIE)		+= phy-exynos-pcie.o
+obj-$(CONFIG_PHY_SAMSUNG_UFS)		+= phy-samsung-ufs.o
 obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
 phy-exynos-usb2-y			+= phy-samsung-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2)	+= phy-exynos4210-usb2.o
diff --git a/drivers/phy/samsung/phy-exynos7-ufs.h b/drivers/phy/samsung/phy-exynos7-ufs.h
new file mode 100644
index 000000000000..da981c1ac040
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos7-ufs.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS PHY driver data for Samsung EXYNOS7 SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ */
+#ifndef _PHY_EXYNOS7_UFS_H_
+#define _PHY_EXYNOS7_UFS_H_
+
+#include "phy-samsung-ufs.h"
+
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL	0x720
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK	0x1
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN	BIT(0)
+
+/* Calibration for phy initialization */
+static const struct samsung_ufs_phy_cfg exynos7_pre_init_cfg[] = {
+	PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY),
+	PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY),
+	PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY),
+	PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY),
+	END_UFS_PHY_CFG
+};
+
+static const struct samsung_ufs_phy_cfg exynos7_post_init_cfg[] = {
+	END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B */
+static const struct samsung_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = {
+	PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY),
+	PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY),
+	PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY),
+	/* Setting order: 1st(0x16, 2nd(0x15) */
+	PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY),
+	PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY),
+	PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A),
+	PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B),
+	PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A),
+	PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B),
+	PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A),
+	PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B),
+	END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B atfer PMC */
+static const struct samsung_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = {
+	PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY),
+	PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY),
+	END_UFS_PHY_CFG
+};
+
+static const struct samsung_ufs_phy_cfg *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = {
+	[CFG_PRE_INIT]		= exynos7_pre_init_cfg,
+	[CFG_POST_INIT]		= exynos7_post_init_cfg,
+	[CFG_PRE_PWR_HS]	= exynos7_pre_pwr_hs_cfg,
+	[CFG_POST_PWR_HS]	= exynos7_post_pwr_hs_cfg,
+};
+
+static struct samsung_ufs_phy_drvdata exynos7_ufs_phy = {
+	.cfg = exynos7_ufs_phy_cfgs,
+	.isol = {
+		.offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL,
+		.mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK,
+		.en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN,
+	},
+};
+
+#endif /* _PHY_EXYNOS7_UFS_H_ */
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
new file mode 100644
index 000000000000..4c8334bba3e9
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver for Samsung SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@gmail.com>
+ * Author: Alim Akhtar <alim.akhtar@samsung.com>
+ *
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "phy-samsung-ufs.h"
+
+#define for_each_phy_lane(phy, i) \
+	for (i = 0; i < (phy)->lane_cnt; i++)
+#define for_each_phy_cfg(cfg) \
+	for (; (cfg)->id; (cfg)++)
+
+#define PHY_DEF_LANE_CNT	1
+
+static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy,
+			const struct samsung_ufs_phy_cfg *cfg, u8 lane)
+{
+	enum {LANE_0, LANE_1}; /* lane index */
+
+	switch (lane) {
+	case LANE_0:
+		writel(cfg->val, (phy)->reg_pma + cfg->off_0);
+		break;
+	case LANE_1:
+		if (cfg->id == PHY_TRSV_BLK)
+			writel(cfg->val, (phy)->reg_pma + cfg->off_1);
+		break;
+	}
+}
+
+int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy)
+{
+	struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+	const unsigned int timeout_us = 100000;
+	const unsigned int sleep_us = 10;
+	u32 val;
+	int err;
+
+	err = readl_poll_timeout(
+			ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
+			val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
+	if (err) {
+		dev_err(ufs_phy->dev,
+			"failed to get phy pll lock acquisition %d\n", err);
+		goto out;
+	}
+
+	err = readl_poll_timeout(
+			ufs_phy->reg_pma + PHY_APB_ADDR(PHY_CDR_LOCK_STATUS),
+			val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
+	if (err) {
+		dev_err(ufs_phy->dev,
+			"failed to get phy cdr lock acquisition %d\n", err);
+		goto out;
+	}
+
+out:
+	return err;
+}
+
+int samsung_ufs_phy_calibrate(struct phy *phy)
+{
+	struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+	struct samsung_ufs_phy_cfg **cfgs = ufs_phy->cfg;
+	const struct samsung_ufs_phy_cfg *cfg;
+	int i;
+	int err = 0;
+
+	if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT ||
+		     ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) {
+		dev_err(ufs_phy->dev, "invalid phy config index %d\n",
+							ufs_phy->ufs_phy_state);
+		return -EINVAL;
+	}
+
+	if (ufs_phy->is_pre_init)
+		ufs_phy->is_pre_init = false;
+	if (ufs_phy->is_post_init) {
+		ufs_phy->is_post_init = false;
+		ufs_phy->ufs_phy_state = CFG_POST_INIT;
+	}
+	if (ufs_phy->is_pre_pmc) {
+		ufs_phy->is_pre_pmc = false;
+		ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS;
+	}
+	if (ufs_phy->is_post_pmc) {
+		ufs_phy->is_post_pmc = false;
+		ufs_phy->ufs_phy_state = CFG_POST_PWR_HS;
+	}
+
+	switch (ufs_phy->ufs_phy_state) {
+	case CFG_PRE_INIT:
+		ufs_phy->is_post_init = true;
+		break;
+	case CFG_POST_INIT:
+		ufs_phy->is_pre_pmc = true;
+		break;
+	case CFG_PRE_PWR_HS:
+		ufs_phy->is_post_pmc = true;
+		break;
+	case CFG_POST_PWR_HS:
+		break;
+	default:
+		dev_err(ufs_phy->dev, "wrong state for phy calibration\n");
+	}
+
+	cfg = cfgs[ufs_phy->ufs_phy_state];
+	if (!cfg)
+		goto out;
+
+	for_each_phy_cfg(cfg) {
+		for_each_phy_lane(ufs_phy, i) {
+			samsung_ufs_phy_config(ufs_phy, cfg, i);
+		}
+	}
+
+	if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS)
+		err = samsung_ufs_phy_wait_for_lock_acq(phy);
+out:
+	return err;
+}
+
+static int samsung_ufs_phy_symbol_clk_init(struct samsung_ufs_phy *phy)
+{
+	struct clk *clk;
+	int ret = 0;
+
+	clk = devm_clk_get(phy->dev, "tx0_symbol_clk");
+	if (IS_ERR(clk)) {
+		dev_err(phy->dev, "failed to get tx0_symbol_clk clock\n");
+		goto out;
+	} else {
+		phy->tx0_symbol_clk = clk;
+	}
+
+	clk = devm_clk_get(phy->dev, "rx0_symbol_clk");
+	if (IS_ERR(clk)) {
+		dev_err(phy->dev, "failed to get rx0_symbol_clk clock\n");
+		goto out;
+	} else {
+		phy->rx0_symbol_clk = clk;
+	}
+
+	clk = devm_clk_get(phy->dev, "rx1_symbol_clk");
+	if (IS_ERR(clk)) {
+		dev_err(phy->dev, "failed to get rx1_symbol_clk clock\n");
+		goto out;
+	} else {
+		phy->rx1_symbol_clk = clk;
+	}
+
+	ret = clk_prepare_enable(phy->tx0_symbol_clk);
+	if (ret) {
+		dev_err(phy->dev, "%s: tx0_symbol_clk enable failed %d\n",
+				__func__, ret);
+		goto out;
+	}
+	ret = clk_prepare_enable(phy->rx0_symbol_clk);
+	if (ret) {
+		dev_err(phy->dev, "%s: rx0_symbol_clk enable failed %d\n",
+				__func__, ret);
+		goto out;
+	}
+	ret = clk_prepare_enable(phy->rx1_symbol_clk);
+	if (ret) {
+		dev_err(phy->dev, "%s: rx1_symbol_clk enable failed %d\n",
+				__func__, ret);
+		goto out;
+	}
+out:
+	return ret;
+}
+
+static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy)
+{
+	struct clk *phy_ref_clk;
+	int ret;
+
+	phy_ref_clk = devm_clk_get(phy->dev, "ref_clk");
+	if (IS_ERR(phy_ref_clk))
+		dev_err(phy->dev, "failed to get ref_clk clock\n");
+	else
+		phy->ref_clk = phy_ref_clk;
+
+	ret = clk_prepare_enable(phy->ref_clk);
+	if (ret) {
+		dev_err(phy->dev, "%s: ref_clk enable failed %d\n",
+				__func__, ret);
+		return ret;
+	}
+
+	dev_info(phy->dev, "UFS MPHY ref_clk_rate = %ld\n", clk_get_rate(phy_ref_clk));
+
+	return 0;
+}
+
+static int samsung_ufs_phy_init(struct phy *phy)
+{
+	struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(phy);
+	int ret;
+
+	_phy->lane_cnt = phy->attrs.bus_width;
+	_phy->ufs_phy_state = CFG_PRE_INIT;
+
+	_phy->is_pre_init = true;
+	_phy->is_post_init = false;
+	_phy->is_pre_pmc = false;
+	_phy->is_post_pmc = false;
+
+
+	if (of_device_is_compatible(_phy->dev->of_node,
+				"samsung,exynos7-ufs-phy")) {
+		ret = samsung_ufs_phy_symbol_clk_init(_phy);
+		if (ret)
+			dev_err(_phy->dev,
+				"failed to set ufs phy symbol clocks\n");
+	}
+
+	ret = samsung_ufs_phy_clks_init(_phy);
+	if (ret)
+		dev_err(_phy->dev, "failed to set ufs phy  clocks\n");
+
+	samsung_ufs_phy_calibrate(phy);
+
+	return 0;
+}
+
+static int samsung_ufs_phy_power_on(struct phy *phy)
+{
+	struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(phy);
+
+	samsung_ufs_phy_ctrl_isol(_phy, false);
+	return 0;
+}
+
+static int samsung_ufs_phy_power_off(struct phy *phy)
+{
+	struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(phy);
+
+	samsung_ufs_phy_ctrl_isol(_phy, true);
+	clk_disable_unprepare(_phy->ref_clk);
+	return 0;
+}
+
+static int samsung_ufs_phy_set_mode(struct phy *generic_phy,
+					enum phy_mode mode, int submode)
+{
+	struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(generic_phy);
+
+	_phy->mode = PHY_MODE_INVALID;
+
+	if (mode > 0)
+		_phy->mode = mode;
+
+	return 0;
+}
+
+static struct phy_ops samsung_ufs_phy_ops = {
+	.init		= samsung_ufs_phy_init,
+	.power_on	= samsung_ufs_phy_power_on,
+	.power_off	= samsung_ufs_phy_power_off,
+	.calibrate	= samsung_ufs_phy_calibrate,
+	.set_mode	= samsung_ufs_phy_set_mode,
+}
+;
+static const struct of_device_id samsung_ufs_phy_match[];
+
+static int samsung_ufs_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	const struct of_device_id *match;
+	struct samsung_ufs_phy *phy;
+	struct phy *gen_phy;
+	struct phy_provider *phy_provider;
+	const struct samsung_ufs_phy_drvdata *drvdata;
+	int err = 0;
+
+	match = of_match_node(samsung_ufs_phy_match, dev->of_node);
+	if (!match) {
+		err = -EINVAL;
+		dev_err(dev, "failed to get match_node\n");
+		goto out;
+	}
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy-pma");
+	phy->reg_pma = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->reg_pma)) {
+		err = PTR_ERR(phy->reg_pma);
+		goto out;
+	}
+
+	phy->reg_pmu = syscon_regmap_lookup_by_phandle(
+				dev->of_node, "samsung,pmu-syscon");
+	if (IS_ERR(phy->reg_pmu)) {
+		err = PTR_ERR(phy->reg_pmu);
+		dev_err(dev, "failed syscon remap for pmu\n");
+		goto out;
+	}
+
+	gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops);
+	if (IS_ERR(gen_phy)) {
+		err = PTR_ERR(gen_phy);
+		dev_err(dev, "failed to create PHY for ufs-phy\n");
+		goto out;
+	}
+
+	drvdata = match->data;
+	phy->dev = dev;
+	phy->drvdata = drvdata;
+	phy->cfg = (struct samsung_ufs_phy_cfg **)drvdata->cfg;
+	phy->isol = &drvdata->isol;
+	phy->lane_cnt = PHY_DEF_LANE_CNT;
+
+	phy_set_drvdata(gen_phy, phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		err = PTR_ERR(phy_provider);
+		dev_err(dev, "failed to register phy-provider\n");
+		goto out;
+	}
+out:
+	return err;
+}
+
+static const struct of_device_id samsung_ufs_phy_match[] = {
+	{
+		.compatible = "samsung,exynos7-ufs-phy",
+		.data = &exynos7_ufs_phy,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match);
+
+static struct platform_driver samsung_ufs_phy_driver = {
+	.probe  = samsung_ufs_phy_probe,
+	.driver = {
+		.name = "samsung-ufs-phy",
+		.of_match_table = samsung_ufs_phy_match,
+	},
+};
+module_platform_driver(samsung_ufs_phy_driver);
+MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver");
+MODULE_AUTHOR("Seungwon Jeon <essuuj@gmail.com>");
+MODULE_AUTHOR("Alim Akhtar <alim.akhtar@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
new file mode 100644
index 000000000000..27dc1b573469
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-ufs.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS PHY driver for Samsung EXYNOS SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@gmail.com>
+ * Author: Alim Akhtar <alim.akhtar@samsung.com>
+ *
+ */
+#ifndef _PHY_SAMSUNG_UFS_
+#define _PHY_SAMSUNG_UFS_
+
+#define PHY_COMN_BLK	1
+#define PHY_TRSV_BLK	2
+#define END_UFS_PHY_CFG { 0 }
+#define PHY_TRSV_CH_OFFSET	0x30
+#define PHY_APB_ADDR(off)	((off) << 2)
+
+#define PHY_COMN_REG_CFG(o, v, d) {	\
+	.off_0 = PHY_APB_ADDR((o)),	\
+	.off_1 = 0,		\
+	.val = (v),		\
+	.desc = (d),		\
+	.id = PHY_COMN_BLK,	\
+}
+
+#define PHY_TRSV_REG_CFG(o, v, d) {	\
+	.off_0 = PHY_APB_ADDR((o)),	\
+	.off_1 = PHY_APB_ADDR((o) + PHY_TRSV_CH_OFFSET),	\
+	.val = (v),		\
+	.desc = (d),		\
+	.id = PHY_TRSV_BLK,	\
+}
+
+/* UFS PHY registers */
+#define PHY_PLL_LOCK_STATUS	0x1e
+#define PHY_CDR_LOCK_STATUS	0x5e
+
+#define PHY_PLL_LOCK_BIT	BIT(5)
+#define PHY_CDR_LOCK_BIT	BIT(4)
+
+/* description for PHY calibration */
+enum {
+	/* applicable to any */
+	PWR_DESC_ANY	= 0,
+	/* mode */
+	PWR_DESC_PWM	= 1,
+	PWR_DESC_HS	= 2,
+	/* series */
+	PWR_DESC_SER_A	= 1,
+	PWR_DESC_SER_B	= 2,
+	/* gear */
+	PWR_DESC_G1	= 1,
+	PWR_DESC_G2	= 2,
+	PWR_DESC_G3	= 3,
+	/* field mask */
+	MD_MASK		= 0x3,
+	SR_MASK		= 0x3,
+	GR_MASK		= 0x7,
+};
+
+#define PWR_MODE_HS_G1_ANY	PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_ANY)
+#define PWR_MODE_HS_G1_SER_A	PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G1_SER_B	PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G2_ANY	PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_ANY)
+#define PWR_MODE_HS_G2_SER_A	PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G2_SER_B	PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G3_ANY	PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_ANY)
+#define PWR_MODE_HS_G3_SER_A	PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G3_SER_B	PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_B)
+#define PWR_MODE(g, s, m)	((((g) & GR_MASK) << 4) |\
+				 (((s) & SR_MASK) << 2) | ((m) & MD_MASK))
+#define PWR_MODE_PWM_ANY	PWR_MODE(PWR_DESC_ANY,\
+					 PWR_DESC_ANY, PWR_DESC_PWM)
+#define PWR_MODE_HS(g, s)	((((g) & GR_MASK) << 4) |\
+				 (((s) & SR_MASK) << 2) | PWR_DESC_HS)
+#define PWR_MODE_HS_ANY		PWR_MODE(PWR_DESC_ANY,\
+					 PWR_DESC_ANY, PWR_DESC_HS)
+#define PWR_MODE_ANY		PWR_MODE(PWR_DESC_ANY,\
+					 PWR_DESC_ANY, PWR_DESC_ANY)
+/* PHY calibration point/state */
+enum {
+	CFG_PRE_INIT,
+	CFG_POST_INIT,
+	CFG_PRE_PWR_HS,
+	CFG_POST_PWR_HS,
+	CFG_TAG_MAX,
+};
+
+struct samsung_ufs_phy_cfg {
+	u32 off_0;
+	u32 off_1;
+	u32 val;
+	u8 desc;
+	u8 id;
+};
+
+struct samsung_ufs_phy_drvdata {
+	const struct samsung_ufs_phy_cfg **cfg;
+	struct pmu_isol {
+		u32 offset;
+		u32 mask;
+		u32 en;
+	} isol;
+};
+
+struct samsung_ufs_phy {
+	struct device *dev;
+	void __iomem *reg_pma;
+	struct regmap *reg_pmu;
+	struct clk *ref_clk;
+	struct clk *ref_clk_parent;
+	struct clk *tx0_symbol_clk;
+	struct clk *rx0_symbol_clk;
+	struct clk *rx1_symbol_clk;
+	const struct samsung_ufs_phy_drvdata *drvdata;
+	struct samsung_ufs_phy_cfg **cfg;
+	const struct pmu_isol *isol;
+	u8 lane_cnt;
+	int ufs_phy_state;
+	enum phy_mode mode;
+	bool is_pre_init;
+	bool is_post_init;
+	bool is_pre_pmc;
+	bool is_post_pmc;
+};
+
+static inline struct samsung_ufs_phy *get_samsung_ufs_phy(struct phy *phy)
+{
+	return (struct samsung_ufs_phy *)phy_get_drvdata(phy);
+}
+
+static inline void samsung_ufs_phy_ctrl_isol(
+		struct samsung_ufs_phy *phy, u32 isol)
+{
+	regmap_update_bits(phy->reg_pmu, phy->isol->offset,
+			phy->isol->mask, isol ? 0 : phy->isol->en);
+}
+
+#include "phy-exynos7-ufs.h"
+
+#endif /* _PHY_SAMSUNG_UFS_ */
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-04-26 17:42 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20200426174202epcas5p30e4ebe79a1de0138562219ecd7ea2e18@epcas5p3.samsung.com>
2020-04-26 17:30 ` [PATCH v7 00/10] exynos-ufs: Add support for UFS HCI Alim Akhtar
2020-04-26 17:30   ` Alim Akhtar
     [not found]   ` <CGME20200426174204epcas5p24796abe49298815cff344fba2e067169@epcas5p2.samsung.com>
2020-04-26 17:30     ` [PATCH v7 01/10] scsi: ufs: add quirk to fix mishandling utrlclr/utmrlclr Alim Akhtar
2020-04-26 17:30       ` Alim Akhtar
     [not found]   ` <CGME20200426174206epcas5p3a948de27f9eaa9256e4c3de5294ce234@epcas5p3.samsung.com>
2020-04-26 17:30     ` [PATCH v7 02/10] scsi: ufs: add quirk to disallow reset of interrupt aggregation Alim Akhtar
2020-04-26 17:30       ` Alim Akhtar
     [not found]   ` <CGME20200426174209epcas5p2fc312fae0c619674bfd784d8659d3b97@epcas5p2.samsung.com>
2020-04-26 17:30     ` [PATCH v7 03/10] scsi: ufs: add quirk to enable host controller without hce Alim Akhtar
2020-04-26 17:30       ` Alim Akhtar
     [not found]   ` <CGME20200426174211epcas5p39d7a1ca820bacb5638b5ba63c1585a53@epcas5p3.samsung.com>
2020-04-26 17:30     ` [PATCH v7 04/10] scsi: ufs: introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk Alim Akhtar
2020-04-26 17:30       ` Alim Akhtar
     [not found]   ` <CGME20200426174213epcas5p3f5b403eafe77d98cbe0b92ccb3fd56b2@epcas5p3.samsung.com>
2020-04-26 17:30     ` [PATCH v7 05/10] scsi: ufs: add quirk to fix abnormal ocs fatal error Alim Akhtar
2020-04-26 17:30       ` Alim Akhtar
2020-04-27  7:54       ` Avri Altman
2020-04-27  7:54         ` Avri Altman
     [not found]   ` <CGME20200426174215epcas5p3e87abccf47976f6318eb470efef9db39@epcas5p3.samsung.com>
2020-04-26 17:30     ` [PATCH v7 06/10] dt-bindings: phy: Document Samsung UFS PHY bindings Alim Akhtar
2020-04-26 17:30       ` Alim Akhtar
2020-05-05 15:56       ` Rob Herring
2020-05-05 15:56         ` Rob Herring
2020-05-09  0:36         ` Alim Akhtar
2020-05-09  0:36           ` Alim Akhtar
     [not found]   ` <CGME20200426174217epcas5p2c7d1606b641b73f67a169b8d22f0637d@epcas5p2.samsung.com>
2020-04-26 17:30     ` Alim Akhtar [this message]
2020-04-26 17:30       ` [PATCH v7 07/10] phy: samsung-ufs: add UFS PHY driver for samsung SoC Alim Akhtar
2020-05-07  5:19       ` Kishon Vijay Abraham I
2020-05-07  5:19         ` Kishon Vijay Abraham I
2020-05-09  0:32         ` Alim Akhtar
2020-05-09  0:32           ` Alim Akhtar
     [not found]   ` <CGME20200426174219epcas5p460c8637629afd930313ae0fa936593cd@epcas5p4.samsung.com>
2020-04-26 17:30     ` [PATCH v7 08/10] dt-bindings: ufs: Add DT binding documentation for ufs Alim Akhtar
2020-04-26 17:30       ` Alim Akhtar
2020-05-05 15:58       ` Rob Herring
2020-05-05 15:58         ` Rob Herring
2020-05-09  0:38         ` Alim Akhtar
2020-05-09  0:38           ` Alim Akhtar
     [not found]   ` <CGME20200426174222epcas5p4c03e929a5cb86bb5fccbcc6e5e98ee80@epcas5p4.samsung.com>
2020-04-26 17:30     ` [PATCH v7 09/10] scsi: ufs-exynos: add UFS host support for Exynos SoCs Alim Akhtar
2020-04-26 17:30       ` Alim Akhtar
     [not found]   ` <CGME20200426174224epcas5p43a1223a63bb414a5060fa9044681f933@epcas5p4.samsung.com>
2020-04-26 17:30     ` [PATCH v7 10/10] arm64: dts: Add node for ufs exynos7 Alim Akhtar
2020-04-26 17:30       ` Alim Akhtar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200426173024.63069-8-alim.akhtar@samsung.com \
    --to=alim.akhtar@samsung.com \
    --cc=avri.altman@wdc.com \
    --cc=cang@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=krzk@kernel.org \
    --cc=kwmad.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=robh@kernel.org \
    --cc=stanley.chu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.