From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rayagonda Kokatanur Date: Mon, 27 Apr 2020 16:17:46 +0530 Subject: [PATCH v1 00/49] add support for broadcom NS3 soc Message-ID: <20200427104835.5258-1-rayagonda.kokatanur@broadcom.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patch series adds support for Broadcom Northstar 3 SoC. NS3 is a octo-core 64-bit ARMv8 Cortex-A72 processors targeting a broad range of networking applications. Abhishek Shah (1): board: ns3: add api to save boot parameters passed from BL31 Bharat Gooty (2): include/configs: ns3: add env variables for Linux boot include/configs: ns3: add support for flashing images Bharat Kumar Reddy Gooty (3): board: ns3: program GIC LPI tables board: ns3: limit U-boot relocation within 16MB memory cmd: bcm: add command for chimp hand shake Corneliu Doban (1): cmd: gpt: add eMMC and GPT support Pramod Kumar (4): arm: dts: ns3: add emmc node arm: dts: ns3: add sp805 watchdog node board: ns3: add FIT image its file board: ns3: add development keys used in FIT Rajesh Ravi (1): board: ns3: default reset type to L3 Ray Jui (1): board: ns3: define ddr memory layout Rayagonda Kokatanur (27): board: ns3: add support for Broadcom Northstar 3 arm: cpu: armv8: add L3 memory flush support configs: ns3: enable clock subsystem arm: dts: ns3: add clock dt node configs: ns3: enable pinctrl driver dt-bindings: pinctrl: add ns3 pads definition arm: dts: ns3: add pinctrl node arm: dts: ns3: add gpio node gpio: do not include on TARGET_BCMNS3 configs: ns3: enable BCM IPROC mmc driver configs: ns3: enable mmc commands arm: dts: ns3: add qspi node dt-bindings: memory: ns3: add memory definitions arm: dts: ns3: add i2c node configs: ns3: enable gpt commands configs: ns3: enable EXT4 and FAT fs support configs: ns3: enable sp805 watchdog driver board: ns3: start sp805 watchdog service dt-bindings: memory: ns3: update GIC LPI address configs: ns3: enable GIC ITS LPI table programing dt-bindings: memory: ns3: add ddr memory definition configs: ns3: enable FIT config configs: ns3: enable PXE boot command configs: ns3: enable RPMB configs: ns3: enable tee and optee driver configs: ns3: env in mmc board: ns3: check chimp handshake status Sheetal Tigadoli (1): common: ns3: add error logging support Srinath Mannam (1): arm: dts: ns3: add PAXB PCIe host and phy node Trac Hoang (2): board: ns3: add generic MCU IPC command send API cmd: bcm: add nitro boot command Vikas Gupta (3): board: ns3: add optee based bnxt fw load driver arm: dts: ns3: add optee node cmd: bcm: add nitro image load commands Vladimir Olovyannikov (2): board: ns3: kconfig: extend board kconfig with specific commands cmd: bcm: add broadcom error log setup command arch/arm/Kconfig | 10 + arch/arm/cpu/armv8/Makefile | 1 + arch/arm/cpu/armv8/bcmns3/Makefile | 5 + arch/arm/cpu/armv8/bcmns3/lowlevel.S | 99 ++ arch/arm/dts/Makefile | 2 + arch/arm/dts/ns3-board.dts | 105 ++ arch/arm/dts/ns3-clock.dtsi | 34 + arch/arm/dts/ns3-pinctrl.dtsi | 321 +++++++ arch/arm/dts/ns3.dtsi | 265 ++++++ arch/arm/include/asm/arch-bcmns3/bl33_info.h | 26 + arch/arm/include/asm/gpio.h | 2 +- board/broadcom/bcmns3/Kconfig | 25 + board/broadcom/bcmns3/Makefile | 7 + board/broadcom/bcmns3/chimp_optee.c | 154 +++ board/broadcom/bcmns3/fit/keys/dev.crt | 21 + board/broadcom/bcmns3/fit/keys/dev.key | 28 + board/broadcom/bcmns3/fit/multi.its | 59 ++ board/broadcom/bcmns3/mcu_cmd.c | 49 + board/broadcom/bcmns3/mcu_cmd.h | 13 + board/broadcom/bcmns3/ns3.c | 263 +++++ cmd/Kconfig | 2 + cmd/Makefile | 2 + cmd/bcm/Kconfig | 12 + cmd/bcm/Makefile | 7 + cmd/bcm/chimp_boot.c | 36 + cmd/bcm/chimp_handshake.c | 32 + cmd/bcm/elog.h | 64 ++ cmd/bcm/logsetup.c | 432 +++++++++ cmd/bcm/nitro_image_load.c | 99 ++ cmd/gpt.c | 95 ++ common/Kconfig | 8 + common/Makefile | 1 + common/bcm_elog.c | 49 + common/console.c | 22 + configs/bcm_ns3_defconfig | 57 ++ include/bcm_elog.h | 37 + include/brcm/chimp.h | 48 + include/configs/bcm_ns3.h | 901 ++++++++++++++++++ include/dt-bindings/memory/bcm-ns3-mc.h | 65 ++ .../dt-bindings/pinctrl/brcm,pinctrl-ns3.h | 41 + 40 files changed, 3498 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv8/bcmns3/Makefile create mode 100644 arch/arm/cpu/armv8/bcmns3/lowlevel.S create mode 100644 arch/arm/dts/ns3-board.dts create mode 100644 arch/arm/dts/ns3-clock.dtsi create mode 100644 arch/arm/dts/ns3-pinctrl.dtsi create mode 100644 arch/arm/dts/ns3.dtsi create mode 100644 arch/arm/include/asm/arch-bcmns3/bl33_info.h create mode 100644 board/broadcom/bcmns3/Kconfig create mode 100644 board/broadcom/bcmns3/Makefile create mode 100644 board/broadcom/bcmns3/chimp_optee.c create mode 100644 board/broadcom/bcmns3/fit/keys/dev.crt create mode 100644 board/broadcom/bcmns3/fit/keys/dev.key create mode 100644 board/broadcom/bcmns3/fit/multi.its create mode 100644 board/broadcom/bcmns3/mcu_cmd.c create mode 100644 board/broadcom/bcmns3/mcu_cmd.h create mode 100644 board/broadcom/bcmns3/ns3.c create mode 100644 cmd/bcm/Kconfig create mode 100644 cmd/bcm/Makefile create mode 100644 cmd/bcm/chimp_boot.c create mode 100644 cmd/bcm/chimp_handshake.c create mode 100644 cmd/bcm/elog.h create mode 100644 cmd/bcm/logsetup.c create mode 100644 cmd/bcm/nitro_image_load.c create mode 100644 common/bcm_elog.c create mode 100644 configs/bcm_ns3_defconfig create mode 100644 include/bcm_elog.h create mode 100644 include/brcm/chimp.h create mode 100644 include/configs/bcm_ns3.h create mode 100644 include/dt-bindings/memory/bcm-ns3-mc.h create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h -- 2.17.1