* [PATCH v2] generic: test per-type quota softlimit enforcement timeout
@ 2020-04-26 14:51 Zorro Lang
2020-04-27 18:50 ` Darrick J. Wong
0 siblings, 1 reply; 3+ messages in thread
From: Zorro Lang @ 2020-04-26 14:51 UTC (permalink / raw)
To: fstests; +Cc: linux-xfs
Set different block & inode grace timers for user, group and project
quotas, then test softlimit enforcement timeout, make sure different
grace timers as expected.
Signed-off-by: Zorro Lang <zlang@redhat.com>
---
Hi,
After generic/594 got merge, I'd like to re-send this case again. It still
fails on XFS, but pass on ext4.
V2 add _require_setquota_project
Thanks,
Zorro
common/quota | 4 +
tests/generic/597 | 180 ++++++++++++++++++++++++++++++++++++++++++
tests/generic/597.out | 41 ++++++++++
tests/generic/group | 1 +
4 files changed, 226 insertions(+)
create mode 100755 tests/generic/597
create mode 100644 tests/generic/597.out
diff --git a/common/quota b/common/quota
index 240e0bbc..1437d5f7 100644
--- a/common/quota
+++ b/common/quota
@@ -217,6 +217,10 @@ _qmount()
if [ "$FSTYP" != "xfs" ]; then
quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1
quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1
+ # try to turn on project quota if it's supported
+ if quotaon --help 2>&1 | grep -q '\-\-project'; then
+ quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1
+ fi
fi
chmod ugo+rwx $SCRATCH_MNT
}
diff --git a/tests/generic/597 b/tests/generic/597
new file mode 100755
index 00000000..52138b80
--- /dev/null
+++ b/tests/generic/597
@@ -0,0 +1,180 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved.
+#
+# FS QA Test No. 597
+#
+# Test per-type(user, group and project) filesystem quota timers, make sure
+# enforcement
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ restore_project
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+require_project()
+{
+ rm -f $tmp.projects $tmp.projid
+ if [ -f /etc/projects ];then
+ cat /etc/projects > $tmp.projects
+ fi
+ if [ -f /etc/projid ];then
+ cat /etc/projid > $tmp.projid
+ fi
+
+ cat >/etc/projects <<EOF
+100:$SCRATCH_MNT/t
+EOF
+ cat >/etc/projid <<EOF
+$qa_user:100
+EOF
+ PROJECT_CHANGED=1
+}
+
+restore_project()
+{
+ if [ "$PROJECT_CHANGED" = "1" ];then
+ rm -f /etc/projects /etc/projid
+ if [ -f $tmp.projects ];then
+ cat $tmp.projects > /etc/projects
+ fi
+ if [ -f $tmp.projid ];then
+ cat $tmp.projid > /etc/projid
+ fi
+ fi
+}
+
+init_files()
+{
+ local dir=$1
+
+ echo "### Initialize files, and their mode and ownership"
+ touch $dir/file{1,2} 2>/dev/null
+ chown $qa_user $dir/file{1,2} 2>/dev/null
+ chgrp $qa_user $dir/file{1,2} 2>/dev/null
+ chmod 777 $dir 2>/dev/null
+}
+
+cleanup_files()
+{
+ echo "### Remove all files"
+ rm -f ${1}/file{1,2,3,4,5,6}
+}
+
+test_grace()
+{
+ local type=$1
+ local dir=$2
+ local bgrace=$3
+ local igrace=$4
+
+ init_files $dir
+ echo "--- Test block quota ---"
+ # Firstly fit below block soft limit
+ echo "Write 225 blocks..."
+ su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \
+ -c fsync $dir/file1" 2>&1 >>$seqres.full | \
+ _filter_xfs_io_error | tee -a $seqres.full
+ repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ # Secondly overcome block soft limit
+ echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..."
+ su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \
+ -c fsync $dir/file1" 2>&1 >>$seqres.full | \
+ _filter_xfs_io_error | tee -a $seqres.full
+ repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ # Reset grace time here, make below grace time test more accurate
+ setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null
+ # Now sleep enough grace time and check that softlimit got enforced
+ sleep $((bgrace + 1))
+ echo "Try to write 1 one more block after grace..."
+ su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \
+ $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \
+ tee -a $seqres.full
+ repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ echo "--- Test inode quota ---"
+ # And now the softlimit test for inodes
+ # First reset space limits so that we don't have problems with
+ # space reservations on XFS
+ setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT
+ echo "Create 2 more files, over the inode softlimit..."
+ su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \
+ _filter_scratch | tee -a $seqres.full
+ repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ # Reset grace time here, make below grace time test more accurate
+ setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null
+ # Wait and check grace time enforcement
+ sleep $((igrace+1))
+ echo "Try to create one more inode after grace..."
+ su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full |
+ _filter_scratch | tee -a $seqres.full
+ repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
+ cleanup_files $dir
+}
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_setquota_project
+_require_quota
+_require_user
+_require_group
+
+_scratch_mkfs >$seqres.full 2>&1
+_scratch_enable_pquota
+_qmount_option "usrquota,grpquota,prjquota"
+_qmount
+_require_prjquota $SCRATCH_DEV
+BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT)
+rm -rf $SCRATCH_MNT/t
+mkdir $SCRATCH_MNT/t
+$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t
+require_project
+
+echo "### Set up different grace timers to each type of quota"
+UBGRACE=12
+UIGRACE=10
+GBGRACE=4
+GIGRACE=2
+PBGRACE=8
+PIGRACE=6
+
+setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \
+ $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
+setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT
+setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \
+ $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
+setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT
+setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \
+ $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
+setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT
+
+echo; echo "### Test user quota softlimit and grace time"
+test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE
+echo; echo "### Test group quota softlimit and grace time"
+test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE
+echo; echo "### Test project quota softlimit and grace time"
+test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/597.out b/tests/generic/597.out
new file mode 100644
index 00000000..57a68ee1
--- /dev/null
+++ b/tests/generic/597.out
@@ -0,0 +1,41 @@
+QA output created by 597
+### Set up different grace timers to each type of quota
+
+### Test user quota softlimit and grace time
+### Initialize files, and their mode and ownership
+--- Test block quota ---
+Write 225 blocks...
+Rewrite 250 blocks plus 1 byte, over the block softlimit...
+Try to write 1 one more block after grace...
+pwrite: Disk quota exceeded
+--- Test inode quota ---
+Create 2 more files, over the inode softlimit...
+Try to create one more inode after grace...
+touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
+### Remove all files
+
+### Test group quota softlimit and grace time
+### Initialize files, and their mode and ownership
+--- Test block quota ---
+Write 225 blocks...
+Rewrite 250 blocks plus 1 byte, over the block softlimit...
+Try to write 1 one more block after grace...
+pwrite: Disk quota exceeded
+--- Test inode quota ---
+Create 2 more files, over the inode softlimit...
+Try to create one more inode after grace...
+touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
+### Remove all files
+
+### Test project quota softlimit and grace time
+### Initialize files, and their mode and ownership
+--- Test block quota ---
+Write 225 blocks...
+Rewrite 250 blocks plus 1 byte, over the block softlimit...
+Try to write 1 one more block after grace...
+pwrite: Disk quota exceeded
+--- Test inode quota ---
+Create 2 more files, over the inode softlimit...
+Try to create one more inode after grace...
+touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded
+### Remove all files
diff --git a/tests/generic/group b/tests/generic/group
index 718575ba..10af4c41 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -598,3 +598,4 @@
594 auto quick quota
595 auto quick encrypt
596 auto quick
+597 auto quick quota
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] generic: test per-type quota softlimit enforcement timeout
2020-04-26 14:51 [PATCH v2] generic: test per-type quota softlimit enforcement timeout Zorro Lang
@ 2020-04-27 18:50 ` Darrick J. Wong
2020-04-28 16:23 ` Zorro Lang
0 siblings, 1 reply; 3+ messages in thread
From: Darrick J. Wong @ 2020-04-27 18:50 UTC (permalink / raw)
To: Zorro Lang; +Cc: fstests, linux-xfs
On Sun, Apr 26, 2020 at 10:51:41PM +0800, Zorro Lang wrote:
> Set different block & inode grace timers for user, group and project
> quotas, then test softlimit enforcement timeout, make sure different
> grace timers as expected.
>
> Signed-off-by: Zorro Lang <zlang@redhat.com>
> ---
>
> Hi,
>
> After generic/594 got merge, I'd like to re-send this case again. It still
> fails on XFS, but pass on ext4.
Can we get the XFS patch (re)sent upstream, please?
--D
> V2 add _require_setquota_project
>
> Thanks,
> Zorro
>
> common/quota | 4 +
> tests/generic/597 | 180 ++++++++++++++++++++++++++++++++++++++++++
> tests/generic/597.out | 41 ++++++++++
> tests/generic/group | 1 +
> 4 files changed, 226 insertions(+)
> create mode 100755 tests/generic/597
> create mode 100644 tests/generic/597.out
>
> diff --git a/common/quota b/common/quota
> index 240e0bbc..1437d5f7 100644
> --- a/common/quota
> +++ b/common/quota
> @@ -217,6 +217,10 @@ _qmount()
> if [ "$FSTYP" != "xfs" ]; then
> quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1
> quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1
> + # try to turn on project quota if it's supported
> + if quotaon --help 2>&1 | grep -q '\-\-project'; then
> + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1
> + fi
> fi
> chmod ugo+rwx $SCRATCH_MNT
> }
> diff --git a/tests/generic/597 b/tests/generic/597
> new file mode 100755
> index 00000000..52138b80
> --- /dev/null
> +++ b/tests/generic/597
> @@ -0,0 +1,180 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved.
> +#
> +# FS QA Test No. 597
> +#
> +# Test per-type(user, group and project) filesystem quota timers, make sure
> +# enforcement
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + restore_project
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/quota
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +require_project()
> +{
> + rm -f $tmp.projects $tmp.projid
> + if [ -f /etc/projects ];then
> + cat /etc/projects > $tmp.projects
> + fi
> + if [ -f /etc/projid ];then
> + cat /etc/projid > $tmp.projid
> + fi
> +
> + cat >/etc/projects <<EOF
> +100:$SCRATCH_MNT/t
> +EOF
> + cat >/etc/projid <<EOF
> +$qa_user:100
> +EOF
> + PROJECT_CHANGED=1
> +}
> +
> +restore_project()
> +{
> + if [ "$PROJECT_CHANGED" = "1" ];then
> + rm -f /etc/projects /etc/projid
> + if [ -f $tmp.projects ];then
> + cat $tmp.projects > /etc/projects
> + fi
> + if [ -f $tmp.projid ];then
> + cat $tmp.projid > /etc/projid
> + fi
> + fi
> +}
> +
> +init_files()
> +{
> + local dir=$1
> +
> + echo "### Initialize files, and their mode and ownership"
> + touch $dir/file{1,2} 2>/dev/null
> + chown $qa_user $dir/file{1,2} 2>/dev/null
> + chgrp $qa_user $dir/file{1,2} 2>/dev/null
> + chmod 777 $dir 2>/dev/null
> +}
> +
> +cleanup_files()
> +{
> + echo "### Remove all files"
> + rm -f ${1}/file{1,2,3,4,5,6}
> +}
> +
> +test_grace()
> +{
> + local type=$1
> + local dir=$2
> + local bgrace=$3
> + local igrace=$4
> +
> + init_files $dir
> + echo "--- Test block quota ---"
> + # Firstly fit below block soft limit
> + echo "Write 225 blocks..."
> + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \
> + -c fsync $dir/file1" 2>&1 >>$seqres.full | \
> + _filter_xfs_io_error | tee -a $seqres.full
> + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
> + # Secondly overcome block soft limit
> + echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..."
> + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \
> + -c fsync $dir/file1" 2>&1 >>$seqres.full | \
> + _filter_xfs_io_error | tee -a $seqres.full
> + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
> + # Reset grace time here, make below grace time test more accurate
> + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null
> + # Now sleep enough grace time and check that softlimit got enforced
> + sleep $((bgrace + 1))
> + echo "Try to write 1 one more block after grace..."
> + su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \
> + $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \
> + tee -a $seqres.full
> + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
> + echo "--- Test inode quota ---"
> + # And now the softlimit test for inodes
> + # First reset space limits so that we don't have problems with
> + # space reservations on XFS
> + setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT
> + echo "Create 2 more files, over the inode softlimit..."
> + su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \
> + _filter_scratch | tee -a $seqres.full
> + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
> + # Reset grace time here, make below grace time test more accurate
> + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null
> + # Wait and check grace time enforcement
> + sleep $((igrace+1))
> + echo "Try to create one more inode after grace..."
> + su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full |
> + _filter_scratch | tee -a $seqres.full
> + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
> + cleanup_files $dir
> +}
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +_require_scratch
> +_require_setquota_project
> +_require_quota
> +_require_user
> +_require_group
> +
> +_scratch_mkfs >$seqres.full 2>&1
> +_scratch_enable_pquota
> +_qmount_option "usrquota,grpquota,prjquota"
> +_qmount
> +_require_prjquota $SCRATCH_DEV
> +BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT)
> +rm -rf $SCRATCH_MNT/t
> +mkdir $SCRATCH_MNT/t
> +$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t
> +require_project
> +
> +echo "### Set up different grace timers to each type of quota"
> +UBGRACE=12
> +UIGRACE=10
> +GBGRACE=4
> +GIGRACE=2
> +PBGRACE=8
> +PIGRACE=6
> +
> +setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \
> + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
> +setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT
> +setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \
> + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
> +setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT
> +setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \
> + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
> +setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT
> +
> +echo; echo "### Test user quota softlimit and grace time"
> +test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE
> +echo; echo "### Test group quota softlimit and grace time"
> +test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE
> +echo; echo "### Test project quota softlimit and grace time"
> +test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/generic/597.out b/tests/generic/597.out
> new file mode 100644
> index 00000000..57a68ee1
> --- /dev/null
> +++ b/tests/generic/597.out
> @@ -0,0 +1,41 @@
> +QA output created by 597
> +### Set up different grace timers to each type of quota
> +
> +### Test user quota softlimit and grace time
> +### Initialize files, and their mode and ownership
> +--- Test block quota ---
> +Write 225 blocks...
> +Rewrite 250 blocks plus 1 byte, over the block softlimit...
> +Try to write 1 one more block after grace...
> +pwrite: Disk quota exceeded
> +--- Test inode quota ---
> +Create 2 more files, over the inode softlimit...
> +Try to create one more inode after grace...
> +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
> +### Remove all files
> +
> +### Test group quota softlimit and grace time
> +### Initialize files, and their mode and ownership
> +--- Test block quota ---
> +Write 225 blocks...
> +Rewrite 250 blocks plus 1 byte, over the block softlimit...
> +Try to write 1 one more block after grace...
> +pwrite: Disk quota exceeded
> +--- Test inode quota ---
> +Create 2 more files, over the inode softlimit...
> +Try to create one more inode after grace...
> +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
> +### Remove all files
> +
> +### Test project quota softlimit and grace time
> +### Initialize files, and their mode and ownership
> +--- Test block quota ---
> +Write 225 blocks...
> +Rewrite 250 blocks plus 1 byte, over the block softlimit...
> +Try to write 1 one more block after grace...
> +pwrite: Disk quota exceeded
> +--- Test inode quota ---
> +Create 2 more files, over the inode softlimit...
> +Try to create one more inode after grace...
> +touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded
> +### Remove all files
> diff --git a/tests/generic/group b/tests/generic/group
> index 718575ba..10af4c41 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -598,3 +598,4 @@
> 594 auto quick quota
> 595 auto quick encrypt
> 596 auto quick
> +597 auto quick quota
> --
> 2.20.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] generic: test per-type quota softlimit enforcement timeout
2020-04-27 18:50 ` Darrick J. Wong
@ 2020-04-28 16:23 ` Zorro Lang
0 siblings, 0 replies; 3+ messages in thread
From: Zorro Lang @ 2020-04-28 16:23 UTC (permalink / raw)
To: Darrick J. Wong; +Cc: fstests, linux-xfs, sandeen
On Mon, Apr 27, 2020 at 11:50:26AM -0700, Darrick J. Wong wrote:
> On Sun, Apr 26, 2020 at 10:51:41PM +0800, Zorro Lang wrote:
> > Set different block & inode grace timers for user, group and project
> > quotas, then test softlimit enforcement timeout, make sure different
> > grace timers as expected.
> >
> > Signed-off-by: Zorro Lang <zlang@redhat.com>
> > ---
> >
> > Hi,
> >
> > After generic/594 got merge, I'd like to re-send this case again. It still
> > fails on XFS, but pass on ext4.
>
> Can we get the XFS patch (re)sent upstream, please?
Hi Darrick,
After talking with Eric, I'll take this half-finished job. I'll fix some bugs
and change something and re-send patches(From Eric) again. I'll take a few time,
due to there're still some problems.
Thanks,
Zorro
>
> --D
>
> > V2 add _require_setquota_project
> >
> > Thanks,
> > Zorro
> >
> > common/quota | 4 +
> > tests/generic/597 | 180 ++++++++++++++++++++++++++++++++++++++++++
> > tests/generic/597.out | 41 ++++++++++
> > tests/generic/group | 1 +
> > 4 files changed, 226 insertions(+)
> > create mode 100755 tests/generic/597
> > create mode 100644 tests/generic/597.out
> >
> > diff --git a/common/quota b/common/quota
> > index 240e0bbc..1437d5f7 100644
> > --- a/common/quota
> > +++ b/common/quota
> > @@ -217,6 +217,10 @@ _qmount()
> > if [ "$FSTYP" != "xfs" ]; then
> > quotacheck -ug $SCRATCH_MNT >>$seqres.full 2>&1
> > quotaon -ug $SCRATCH_MNT >>$seqres.full 2>&1
> > + # try to turn on project quota if it's supported
> > + if quotaon --help 2>&1 | grep -q '\-\-project'; then
> > + quotaon --project $SCRATCH_MNT >>$seqres.full 2>&1
> > + fi
> > fi
> > chmod ugo+rwx $SCRATCH_MNT
> > }
> > diff --git a/tests/generic/597 b/tests/generic/597
> > new file mode 100755
> > index 00000000..52138b80
> > --- /dev/null
> > +++ b/tests/generic/597
> > @@ -0,0 +1,180 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved.
> > +#
> > +# FS QA Test No. 597
> > +#
> > +# Test per-type(user, group and project) filesystem quota timers, make sure
> > +# enforcement
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + restore_project
> > + cd /
> > + rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +. ./common/quota
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +require_project()
> > +{
> > + rm -f $tmp.projects $tmp.projid
> > + if [ -f /etc/projects ];then
> > + cat /etc/projects > $tmp.projects
> > + fi
> > + if [ -f /etc/projid ];then
> > + cat /etc/projid > $tmp.projid
> > + fi
> > +
> > + cat >/etc/projects <<EOF
> > +100:$SCRATCH_MNT/t
> > +EOF
> > + cat >/etc/projid <<EOF
> > +$qa_user:100
> > +EOF
> > + PROJECT_CHANGED=1
> > +}
> > +
> > +restore_project()
> > +{
> > + if [ "$PROJECT_CHANGED" = "1" ];then
> > + rm -f /etc/projects /etc/projid
> > + if [ -f $tmp.projects ];then
> > + cat $tmp.projects > /etc/projects
> > + fi
> > + if [ -f $tmp.projid ];then
> > + cat $tmp.projid > /etc/projid
> > + fi
> > + fi
> > +}
> > +
> > +init_files()
> > +{
> > + local dir=$1
> > +
> > + echo "### Initialize files, and their mode and ownership"
> > + touch $dir/file{1,2} 2>/dev/null
> > + chown $qa_user $dir/file{1,2} 2>/dev/null
> > + chgrp $qa_user $dir/file{1,2} 2>/dev/null
> > + chmod 777 $dir 2>/dev/null
> > +}
> > +
> > +cleanup_files()
> > +{
> > + echo "### Remove all files"
> > + rm -f ${1}/file{1,2,3,4,5,6}
> > +}
> > +
> > +test_grace()
> > +{
> > + local type=$1
> > + local dir=$2
> > + local bgrace=$3
> > + local igrace=$4
> > +
> > + init_files $dir
> > + echo "--- Test block quota ---"
> > + # Firstly fit below block soft limit
> > + echo "Write 225 blocks..."
> > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((225 * $BLOCK_SIZE))' \
> > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \
> > + _filter_xfs_io_error | tee -a $seqres.full
> > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
> > + # Secondly overcome block soft limit
> > + echo "Rewrite 250 blocks plus 1 byte, over the block softlimit..."
> > + su $qa_user -c "$XFS_IO_PROG -c 'pwrite 0 $((250 * $BLOCK_SIZE + 1))' \
> > + -c fsync $dir/file1" 2>&1 >>$seqres.full | \
> > + _filter_xfs_io_error | tee -a $seqres.full
> > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
> > + # Reset grace time here, make below grace time test more accurate
> > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null
> > + # Now sleep enough grace time and check that softlimit got enforced
> > + sleep $((bgrace + 1))
> > + echo "Try to write 1 one more block after grace..."
> > + su $qa_user -c "$XFS_IO_PROG -c 'truncate 0' -c 'pwrite 0 $BLOCK_SIZE' \
> > + $dir/file2" 2>&1 >>$seqres.full | _filter_xfs_io_error | \
> > + tee -a $seqres.full
> > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
> > + echo "--- Test inode quota ---"
> > + # And now the softlimit test for inodes
> > + # First reset space limits so that we don't have problems with
> > + # space reservations on XFS
> > + setquota -$type $qa_user 0 0 3 100 $SCRATCH_MNT
> > + echo "Create 2 more files, over the inode softlimit..."
> > + su $qa_user -c "touch $dir/file3 $dir/file4" 2>&1 >>$seqres.full | \
> > + _filter_scratch | tee -a $seqres.full
> > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
> > + # Reset grace time here, make below grace time test more accurate
> > + setquota -$type $qa_user -T $bgrace $igrace $SCRATCH_MNT 2>/dev/null
> > + # Wait and check grace time enforcement
> > + sleep $((igrace+1))
> > + echo "Try to create one more inode after grace..."
> > + su $qa_user -c "touch $dir/file5" 2>&1 >>$seqres.full |
> > + _filter_scratch | tee -a $seqres.full
> > + repquota -v -$type $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1
> > + cleanup_files $dir
> > +}
> > +
> > +# real QA test starts here
> > +_supported_fs generic
> > +_supported_os Linux
> > +_require_scratch
> > +_require_setquota_project
> > +_require_quota
> > +_require_user
> > +_require_group
> > +
> > +_scratch_mkfs >$seqres.full 2>&1
> > +_scratch_enable_pquota
> > +_qmount_option "usrquota,grpquota,prjquota"
> > +_qmount
> > +_require_prjquota $SCRATCH_DEV
> > +BLOCK_SIZE=$(_get_file_block_size $SCRATCH_MNT)
> > +rm -rf $SCRATCH_MNT/t
> > +mkdir $SCRATCH_MNT/t
> > +$XFS_IO_PROG -r -c "chproj 100" -c "chattr +P" $SCRATCH_MNT/t
> > +require_project
> > +
> > +echo "### Set up different grace timers to each type of quota"
> > +UBGRACE=12
> > +UIGRACE=10
> > +GBGRACE=4
> > +GIGRACE=2
> > +PBGRACE=8
> > +PIGRACE=6
> > +
> > +setquota -u $qa_user $((250 * $BLOCK_SIZE / 1024)) \
> > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
> > +setquota -u -t $UBGRACE $UIGRACE $SCRATCH_MNT
> > +setquota -g $qa_user $((250 * $BLOCK_SIZE / 1024)) \
> > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
> > +setquota -g -t $GBGRACE $GIGRACE $SCRATCH_MNT
> > +setquota -P $qa_user $((250 * $BLOCK_SIZE / 1024)) \
> > + $((1000 * $BLOCK_SIZE / 1024)) 3 100 $SCRATCH_MNT
> > +setquota -P -t $PBGRACE $PIGRACE $SCRATCH_MNT
> > +
> > +echo; echo "### Test user quota softlimit and grace time"
> > +test_grace u $SCRATCH_MNT $UBGRACE $UIGRACE
> > +echo; echo "### Test group quota softlimit and grace time"
> > +test_grace g $SCRATCH_MNT $GBGRACE $GIGRACE
> > +echo; echo "### Test project quota softlimit and grace time"
> > +test_grace P $SCRATCH_MNT/t $PBGRACE $PIGRACE
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/generic/597.out b/tests/generic/597.out
> > new file mode 100644
> > index 00000000..57a68ee1
> > --- /dev/null
> > +++ b/tests/generic/597.out
> > @@ -0,0 +1,41 @@
> > +QA output created by 597
> > +### Set up different grace timers to each type of quota
> > +
> > +### Test user quota softlimit and grace time
> > +### Initialize files, and their mode and ownership
> > +--- Test block quota ---
> > +Write 225 blocks...
> > +Rewrite 250 blocks plus 1 byte, over the block softlimit...
> > +Try to write 1 one more block after grace...
> > +pwrite: Disk quota exceeded
> > +--- Test inode quota ---
> > +Create 2 more files, over the inode softlimit...
> > +Try to create one more inode after grace...
> > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
> > +### Remove all files
> > +
> > +### Test group quota softlimit and grace time
> > +### Initialize files, and their mode and ownership
> > +--- Test block quota ---
> > +Write 225 blocks...
> > +Rewrite 250 blocks plus 1 byte, over the block softlimit...
> > +Try to write 1 one more block after grace...
> > +pwrite: Disk quota exceeded
> > +--- Test inode quota ---
> > +Create 2 more files, over the inode softlimit...
> > +Try to create one more inode after grace...
> > +touch: cannot touch 'SCRATCH_MNT/file5': Disk quota exceeded
> > +### Remove all files
> > +
> > +### Test project quota softlimit and grace time
> > +### Initialize files, and their mode and ownership
> > +--- Test block quota ---
> > +Write 225 blocks...
> > +Rewrite 250 blocks plus 1 byte, over the block softlimit...
> > +Try to write 1 one more block after grace...
> > +pwrite: Disk quota exceeded
> > +--- Test inode quota ---
> > +Create 2 more files, over the inode softlimit...
> > +Try to create one more inode after grace...
> > +touch: cannot touch 'SCRATCH_MNT/t/file5': Disk quota exceeded
> > +### Remove all files
> > diff --git a/tests/generic/group b/tests/generic/group
> > index 718575ba..10af4c41 100644
> > --- a/tests/generic/group
> > +++ b/tests/generic/group
> > @@ -598,3 +598,4 @@
> > 594 auto quick quota
> > 595 auto quick encrypt
> > 596 auto quick
> > +597 auto quick quota
> > --
> > 2.20.1
> >
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-04-28 16:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-26 14:51 [PATCH v2] generic: test per-type quota softlimit enforcement timeout Zorro Lang
2020-04-27 18:50 ` Darrick J. Wong
2020-04-28 16:23 ` Zorro Lang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.