From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nicolas Saenz Julienne Date: Tue, 28 Apr 2020 19:44:50 +0200 Subject: [PATCH 1/2] arm: rpi: Add function to trigger VL805's firmware load In-Reply-To: <20200428174449.27953-1-nsaenzjulienne@suse.de> References: <20200428174449.27953-1-nsaenzjulienne@suse.de> Message-ID: <20200428174449.27953-2-nsaenzjulienne@suse.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On the Raspberry Pi 4, after a PCI reset, VL805's (a xHCI chip) firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's VideCore (the SoC's co-processor). Introduce the function that informs VideCore that VL805 may need its firmware loaded. Signed-off-by: Nicolas Saenz Julienne --- arch/arm/mach-bcm283x/include/mach/mbox.h | 13 +++++++ arch/arm/mach-bcm283x/include/mach/msg.h | 7 ++++ arch/arm/mach-bcm283x/msg.c | 41 +++++++++++++++++++++++ 3 files changed, 61 insertions(+) diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h index 60e226ce1d..2ae2d3d97c 100644 --- a/arch/arm/mach-bcm283x/include/mach/mbox.h +++ b/arch/arm/mach-bcm283x/include/mach/mbox.h @@ -491,6 +491,19 @@ struct bcm2835_mbox_tag_set_palette { } body; }; +#define BCM2835_MBOX_TAG_NOTIFY_XHCI_RESET 0x00030058 + +struct bcm2835_mbox_tag_pci_dev_addr { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + u32 dev_addr; + } req; + struct { + } resp; + } body; +}; + /* * Pass a raw u32 message to the VC, and receive a raw u32 back. * diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h index 4afb08631b..c63fa4f6ee 100644 --- a/arch/arm/mach-bcm283x/include/mach/msg.h +++ b/arch/arm/mach-bcm283x/include/mach/msg.h @@ -48,4 +48,11 @@ int bcm2835_set_video_params(int *widthp, int *heightp, int depth_bpp, int pixel_order, int alpha_mode, ulong *fb_basep, ulong *fb_sizep, int *pitchp); +/** + * bcm2711_load_vl805_firmware() - get vl805's firmware loaded + * + * @return 0 if OK, -ve on error + */ +int bcm2711_load_vl805_firmware(void); + #endif diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c index 94b75283f8..861438899f 100644 --- a/arch/arm/mach-bcm283x/msg.c +++ b/arch/arm/mach-bcm283x/msg.c @@ -40,6 +40,12 @@ struct msg_setup { u32 end_tag; }; +struct msg_load_vl805_fw { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_pci_dev_addr dev_addr; + u32 end_tag; +}; + int bcm2835_power_on_module(u32 module) { ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1); @@ -151,3 +157,38 @@ int bcm2835_set_video_params(int *widthp, int *heightp, int depth_bpp, return 0; } + +/* + * On the Raspberry Pi 4, after a PCI reset, VL805's (the xHCI chip) firmware + * may either be loaded directly from an EEPROM or, if not present, by the + * SoC's VideCore. This informs VideoCore that VL805 needs its firmware loaded. + */ +int bcm2711_load_vl805_firmware(void) +{ + ALLOC_CACHE_ALIGN_BUFFER(struct msg_load_vl805_fw, + msg_load_vl805_fw, 1); + int ret; + + BCM2835_MBOX_INIT_HDR(msg_load_vl805_fw); + BCM2835_MBOX_INIT_TAG(&msg_load_vl805_fw->dev_addr, NOTIFY_XHCI_RESET); + + /* + * The pci device address is expected like this: + * + * PCI_BUS << 20 | PCI_SLOT << 15 | PCI_FUNC << 12 + * + * But since RPi4's PCIe setup is hardwired, we know the address in + * advance. + */ + msg_load_vl805_fw->dev_addr.body.req.dev_addr = 0x100000; + + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, + &msg_load_vl805_fw->hdr); + if (ret) { + printf("bcm2711: Faild to load vl805's firmware, %d\n", ret); + return -EIO; + } + + return 0; +} + -- 2.26.2