Hi,

On Sat, Apr 25, 2020 at 03:01:01AM +0200, Daniel González Cabanelas wrote:
> Add Linkstation poweroff bindings documentation. 
> 
> Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
> ---

Thanks for the patch.

DT bindings need to be CC'd to devicetree@vger.kernel.org and to
Rob Herring. Also please Cc me (sre@kernel.org). I will not merge
this without an explicit Acked-by from Rob.

-- Sebastian

>  .../power/reset/linkstation-poweroff.yaml     | 42 +++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/linkstation-poweroff.yaml
> 
> diff --git a/Documentation/devicetree/bindings/power/reset/linkstation-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/linkstation-poweroff.yaml
> new file mode 100644
> index 0000000000..b647baecf3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/linkstation-poweroff.yaml
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/reset/linkstation-poweroff.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Buffalo Linkstation poweroff driver
> +
> +maintainers:
> +  - Daniel González Cabanelas <dgcbueu@gmail.com>
> +
> +description: |
> +  This driver is used to add the power off function to some Buffalo 
> +  LinkStations (ARM MVEBU boards). They use a LED output pin at the 
> +  ethernet PHY to inform the board if the power off operation must be
> +  performed after restarting.
> +
> +  When the power-off handler is called, the ethernet PHY LED2 ouptut is
> +  set to OFF. If the restart command is executed then the PHY LED2 output
> +  is asserted to ON.
> +
> +properties:
> +  compatible:
> +    const: linkstation,power-off
> +
> +  phy-handle,led:
> +    description: Phandle to a node of the ethernet PHY used for the power 
> +      function. If this optional property is not specified, then the first
> +      PHY found in the MDIO bus will be used.
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    poweroff {
> +        compatible = "linkstation,power-off";
> +        phy-handle,led = <&ethphy0>;
> +    };
> -- 
> 2.26.2
> 
> 
> 
>