* [PATCH net-next v5 0/3] net: phy: mdio: add IPQ40xx MDIO support
@ 2020-04-30 9:07 Robert Marko
2020-04-30 9:07 ` [PATCH net-next v5 1/3] net: phy: mdio: add IPQ4019 MDIO driver Robert Marko
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Robert Marko @ 2020-04-30 9:07 UTC (permalink / raw)
To: andrew, f.fainelli, hkallweit1, linux, linux-kernel, netdev,
agross, bjorn.andersson, robh+dt, mark.rutland, linux-arm-msm,
devicetree
Cc: Robert Marko
This patch series provides support for the IPQ40xx built-in MDIO interface.
Included are driver, devicetree bindings for it and devicetree node.
Robert Marko (3):
net: phy: mdio: add IPQ4019 MDIO driver
dt-bindings: add Qualcomm IPQ4019 MDIO bindings
ARM: dts: qcom: ipq4019: add MDIO node
.../bindings/net/qcom,ipq4019-mdio.yaml | 61 +++++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 +++
drivers/net/phy/Kconfig | 7 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-ipq4019.c | 160 ++++++++++++++++++
5 files changed, 257 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
create mode 100644 drivers/net/phy/mdio-ipq4019.c
--
2.26.2
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH net-next v5 1/3] net: phy: mdio: add IPQ4019 MDIO driver
2020-04-30 9:07 [PATCH net-next v5 0/3] net: phy: mdio: add IPQ40xx MDIO support Robert Marko
@ 2020-04-30 9:07 ` Robert Marko
2020-04-30 9:07 ` [PATCH net-next v5 2/3] dt-bindings: add Qualcomm IPQ4019 MDIO bindings Robert Marko
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Robert Marko @ 2020-04-30 9:07 UTC (permalink / raw)
To: andrew, f.fainelli, hkallweit1, linux, linux-kernel, netdev,
agross, bjorn.andersson, robh+dt, mark.rutland, linux-arm-msm,
devicetree
Cc: Robert Marko, Christian Lamparter, Luka Perkov
This patch adds the driver for the MDIO interface
inside of Qualcomm IPQ40xx series SoC-s.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
---
Changes from v3 to v4:
* Change compatible and references to IPQ4019
per Rob Herrings suggestion
Changes from v2 to v3:
* Rename registers
* Remove unnecessary variable initialisations
* Switch to readl_poll_timeout() instead of custom solution
* Drop unused header
Changes from v1 to v2:
* Remove magic default value
* Remove lockdep_assert_held
* Add C45 check
* Simplify the driver
* Drop device and mii_bus structs from private struct
* Use devm_mdiobus_alloc_size()
drivers/net/phy/Kconfig | 7 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-ipq4019.c | 160 +++++++++++++++++++++++++++++++++
3 files changed, 168 insertions(+)
create mode 100644 drivers/net/phy/mdio-ipq4019.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 3fa33d27eeba..6693df126861 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -157,6 +157,13 @@ config MDIO_I2C
This is library mode.
+config MDIO_IPQ4019
+ tristate "Qualcomm IPQ4019 MDIO interface support"
+ depends on HAS_IOMEM && OF_MDIO
+ help
+ This driver supports the MDIO interface found in Qualcomm
+ IPQ40xx series Soc-s.
+
config MDIO_IPQ8064
tristate "Qualcomm IPQ8064 MDIO interface support"
depends on HAS_IOMEM && OF_MDIO
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 2f5c7093a65b..12e0d0b137b9 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
+obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o
obj-$(CONFIG_MDIO_IPQ8064) += mdio-ipq8064.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
diff --git a/drivers/net/phy/mdio-ipq4019.c b/drivers/net/phy/mdio-ipq4019.c
new file mode 100644
index 000000000000..f1f25489e134
--- /dev/null
+++ b/drivers/net/phy/mdio-ipq4019.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved. */
+/* Copyright (c) 2020 Sartura Ltd. */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define MDIO_ADDR_REG 0x44
+#define MDIO_DATA_WRITE_REG 0x48
+#define MDIO_DATA_READ_REG 0x4c
+#define MDIO_CMD_REG 0x50
+#define MDIO_CMD_ACCESS_BUSY BIT(16)
+#define MDIO_CMD_ACCESS_START BIT(8)
+#define MDIO_CMD_ACCESS_CODE_READ 0
+#define MDIO_CMD_ACCESS_CODE_WRITE 1
+
+#define ipq4019_MDIO_TIMEOUT 10000
+#define ipq4019_MDIO_SLEEP 10
+
+struct ipq4019_mdio_data {
+ void __iomem *membase;
+};
+
+static int ipq4019_mdio_wait_busy(struct mii_bus *bus)
+{
+ struct ipq4019_mdio_data *priv = bus->priv;
+ unsigned int busy;
+
+ return readl_poll_timeout(priv->membase + MDIO_CMD_REG, busy,
+ (busy & MDIO_CMD_ACCESS_BUSY) == 0,
+ ipq4019_MDIO_SLEEP, ipq4019_MDIO_TIMEOUT);
+}
+
+static int ipq4019_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct ipq4019_mdio_data *priv = bus->priv;
+ unsigned int cmd;
+
+ /* Reject clause 45 */
+ if (regnum & MII_ADDR_C45)
+ return -EOPNOTSUPP;
+
+ if (ipq4019_mdio_wait_busy(bus))
+ return -ETIMEDOUT;
+
+ /* issue the phy address and reg */
+ writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG);
+
+ cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_READ;
+
+ /* issue read command */
+ writel(cmd, priv->membase + MDIO_CMD_REG);
+
+ /* Wait read complete */
+ if (ipq4019_mdio_wait_busy(bus))
+ return -ETIMEDOUT;
+
+ /* Read and return data */
+ return readl(priv->membase + MDIO_DATA_READ_REG);
+}
+
+static int ipq4019_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+ u16 value)
+{
+ struct ipq4019_mdio_data *priv = bus->priv;
+ unsigned int cmd;
+
+ /* Reject clause 45 */
+ if (regnum & MII_ADDR_C45)
+ return -EOPNOTSUPP;
+
+ if (ipq4019_mdio_wait_busy(bus))
+ return -ETIMEDOUT;
+
+ /* issue the phy address and reg */
+ writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG);
+
+ /* issue write data */
+ writel(value, priv->membase + MDIO_DATA_WRITE_REG);
+
+ cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_WRITE;
+ /* issue write command */
+ writel(cmd, priv->membase + MDIO_CMD_REG);
+
+ /* Wait write complete */
+ if (ipq4019_mdio_wait_busy(bus))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int ipq4019_mdio_probe(struct platform_device *pdev)
+{
+ struct ipq4019_mdio_data *priv;
+ struct mii_bus *bus;
+ int ret;
+
+ bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv));
+ if (!bus)
+ return -ENOMEM;
+
+ priv = bus->priv;
+
+ priv->membase = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->membase))
+ return PTR_ERR(priv->membase);
+
+ bus->name = "ipq4019_mdio";
+ bus->read = ipq4019_mdio_read;
+ bus->write = ipq4019_mdio_write;
+ bus->parent = &pdev->dev;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id);
+
+ ret = of_mdiobus_register(bus, pdev->dev.of_node);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, bus);
+
+ return 0;
+}
+
+static int ipq4019_mdio_remove(struct platform_device *pdev)
+{
+ struct mii_bus *bus = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(bus);
+
+ return 0;
+}
+
+static const struct of_device_id ipq4019_mdio_dt_ids[] = {
+ { .compatible = "qcom,ipq4019-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ipq4019_mdio_dt_ids);
+
+static struct platform_driver ipq4019_mdio_driver = {
+ .probe = ipq4019_mdio_probe,
+ .remove = ipq4019_mdio_remove,
+ .driver = {
+ .name = "ipq4019-mdio",
+ .of_match_table = ipq4019_mdio_dt_ids,
+ },
+};
+
+module_platform_driver(ipq4019_mdio_driver);
+
+MODULE_DESCRIPTION("ipq4019 MDIO interface driver");
+MODULE_AUTHOR("Qualcomm Atheros");
+MODULE_LICENSE("Dual BSD/GPL");
--
2.26.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH net-next v5 2/3] dt-bindings: add Qualcomm IPQ4019 MDIO bindings
2020-04-30 9:07 [PATCH net-next v5 0/3] net: phy: mdio: add IPQ40xx MDIO support Robert Marko
2020-04-30 9:07 ` [PATCH net-next v5 1/3] net: phy: mdio: add IPQ4019 MDIO driver Robert Marko
@ 2020-04-30 9:07 ` Robert Marko
2020-04-30 9:07 ` [PATCH net-next v5 3/3] ARM: dts: qcom: ipq4019: add MDIO node Robert Marko
2020-04-30 19:11 ` [PATCH net-next v5 0/3] net: phy: mdio: add IPQ40xx MDIO support David Miller
3 siblings, 0 replies; 5+ messages in thread
From: Robert Marko @ 2020-04-30 9:07 UTC (permalink / raw)
To: andrew, f.fainelli, hkallweit1, linux, linux-kernel, netdev,
agross, bjorn.andersson, robh+dt, mark.rutland, linux-arm-msm,
devicetree
Cc: Robert Marko, Luka Perkov
This patch adds the binding document for the IPQ40xx MDIO driver.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
---
Changes from v3 to v4:
* Change compatible to IPQ4019
Changes from v2 to v3:
* Remove status from example
.../bindings/net/qcom,ipq4019-mdio.yaml | 61 +++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
new file mode 100644
index 000000000000..13555a89975f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ipq4019-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ40xx MDIO Controller Device Tree Bindings
+
+maintainers:
+ - Robert Marko <robert.marko@sartura.hr>
+
+allOf:
+ - $ref: "mdio.yaml#"
+
+properties:
+ compatible:
+ const: qcom,ipq4019-mdio
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+examples:
+ - |
+ mdio@90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,ipq4019-mdio";
+ reg = <0x90000 0x64>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
--
2.26.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH net-next v5 3/3] ARM: dts: qcom: ipq4019: add MDIO node
2020-04-30 9:07 [PATCH net-next v5 0/3] net: phy: mdio: add IPQ40xx MDIO support Robert Marko
2020-04-30 9:07 ` [PATCH net-next v5 1/3] net: phy: mdio: add IPQ4019 MDIO driver Robert Marko
2020-04-30 9:07 ` [PATCH net-next v5 2/3] dt-bindings: add Qualcomm IPQ4019 MDIO bindings Robert Marko
@ 2020-04-30 9:07 ` Robert Marko
2020-04-30 19:11 ` [PATCH net-next v5 0/3] net: phy: mdio: add IPQ40xx MDIO support David Miller
3 siblings, 0 replies; 5+ messages in thread
From: Robert Marko @ 2020-04-30 9:07 UTC (permalink / raw)
To: andrew, f.fainelli, hkallweit1, linux, linux-kernel, netdev,
agross, bjorn.andersson, robh+dt, mark.rutland, linux-arm-msm,
devicetree
Cc: Robert Marko, Christian Lamparter, Luka Perkov
This patch adds the necessary MDIO interface node
to the Qualcomm IPQ4019 DTSI.
Built-in QCA8337N switch is managed using it,
and since we have a driver for it lets add it.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
---
Changes from v4 to v5:
* Rebase to apply on net-next
Changes from v3 to v4:
* Change compatible to IPQ4019
Changes from v2 to v3:
* Correct commit title
arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index bfa9ce4c6e69..b9839f86e703 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -576,5 +576,33 @@ wifi1: wifi@a800000 {
"legacy";
status = "disabled";
};
+
+ mdio: mdio@90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,ipq4019-mdio";
+ reg = <0x90000 0x64>;
+ status = "disabled";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ ethphy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
};
};
--
2.26.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH net-next v5 0/3] net: phy: mdio: add IPQ40xx MDIO support
2020-04-30 9:07 [PATCH net-next v5 0/3] net: phy: mdio: add IPQ40xx MDIO support Robert Marko
` (2 preceding siblings ...)
2020-04-30 9:07 ` [PATCH net-next v5 3/3] ARM: dts: qcom: ipq4019: add MDIO node Robert Marko
@ 2020-04-30 19:11 ` David Miller
3 siblings, 0 replies; 5+ messages in thread
From: David Miller @ 2020-04-30 19:11 UTC (permalink / raw)
To: robert.marko
Cc: andrew, f.fainelli, hkallweit1, linux, linux-kernel, netdev,
agross, bjorn.andersson, robh+dt, mark.rutland, linux-arm-msm,
devicetree
From: Robert Marko <robert.marko@sartura.hr>
Date: Thu, 30 Apr 2020 11:07:04 +0200
> This patch series provides support for the IPQ40xx built-in MDIO interface.
> Included are driver, devicetree bindings for it and devicetree node.
Series applied, thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-04-30 19:11 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-30 9:07 [PATCH net-next v5 0/3] net: phy: mdio: add IPQ40xx MDIO support Robert Marko
2020-04-30 9:07 ` [PATCH net-next v5 1/3] net: phy: mdio: add IPQ4019 MDIO driver Robert Marko
2020-04-30 9:07 ` [PATCH net-next v5 2/3] dt-bindings: add Qualcomm IPQ4019 MDIO bindings Robert Marko
2020-04-30 9:07 ` [PATCH net-next v5 3/3] ARM: dts: qcom: ipq4019: add MDIO node Robert Marko
2020-04-30 19:11 ` [PATCH net-next v5 0/3] net: phy: mdio: add IPQ40xx MDIO support David Miller
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.