All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Wang <frank.wang@rock-chips.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 6/9] driver: usb: drop legacy rockchip xhci driver
Date: Thu, 30 Apr 2020 10:17:56 +0800	[thread overview]
Message-ID: <20200430021756.25904-1-frank.wang@rock-chips.com> (raw)
In-Reply-To: <20200430021620.25772-1-frank.wang@rock-chips.com>

We have changed to use dwc3 generic driver for usb3.0 host, so the
legacy Rockchip's xHCI driver is not needed, and drop it.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
---
 drivers/usb/host/Kconfig         |   9 --
 drivers/usb/host/Makefile        |   1 -
 drivers/usb/host/xhci-rockchip.c | 196 -------------------------------
 3 files changed, 206 deletions(-)
 delete mode 100644 drivers/usb/host/xhci-rockchip.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 94ac969058..94232358a0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -47,15 +47,6 @@ config USB_XHCI_PCI
 	help
 	  Enables support for the PCI-based xHCI controller.
 
-config USB_XHCI_ROCKCHIP
-	bool "Support for Rockchip on-chip xHCI USB controller"
-	depends on ARCH_ROCKCHIP
-	depends on DM_REGULATOR
-	depends on DM_USB
-	default y
-	help
-	  Enables support for the on-chip xHCI controller on Rockchip SoCs.
-
 config USB_XHCI_RCAR
 	bool "Renesas RCar USB 3.0 support"
 	default y
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index b62f346094..1754714673 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -48,7 +48,6 @@ obj-$(CONFIG_USB_XHCI_BRCM) += xhci-brcm.o
 obj-$(CONFIG_USB_XHCI_HCD) += xhci.o xhci-mem.o xhci-ring.o
 obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o
 obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
-obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
 obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
 obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o
 obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
diff --git a/drivers/usb/host/xhci-rockchip.c b/drivers/usb/host/xhci-rockchip.c
deleted file mode 100644
index b67722fe45..0000000000
--- a/drivers/usb/host/xhci-rockchip.c
+++ /dev/null
@@ -1,196 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2016 Rockchip, Inc.
- * Authors: Daniel Meng <daniel.meng@rock-chips.com>
- */
-#include <common.h>
-#include <dm.h>
-#include <malloc.h>
-#include <usb.h>
-#include <watchdog.h>
-#include <linux/errno.h>
-#include <linux/compat.h>
-#include <linux/usb/dwc3.h>
-#include <power/regulator.h>
-
-#include <usb/xhci.h>
-
-struct rockchip_xhci_platdata {
-	fdt_addr_t hcd_base;
-	struct udevice *vbus_supply;
-};
-
-/*
- * Contains pointers to register base addresses
- * for the usb controller.
- */
-struct rockchip_xhci {
-	struct usb_platdata usb_plat;
-	struct xhci_ctrl ctrl;
-	struct xhci_hccr *hcd;
-	struct dwc3 *dwc3_reg;
-};
-
-static int xhci_usb_ofdata_to_platdata(struct udevice *dev)
-{
-	struct rockchip_xhci_platdata *plat = dev_get_platdata(dev);
-	int ret = 0;
-
-	/*
-	 * Get the base address for XHCI controller from the device node
-	 */
-	plat->hcd_base = dev_read_addr(dev);
-	if (plat->hcd_base == FDT_ADDR_T_NONE) {
-		pr_err("Can't get the XHCI register base address\n");
-		return -ENXIO;
-	}
-
-	/* Vbus regulator */
-	ret = device_get_supply_regulator(dev, "vbus-supply",
-					  &plat->vbus_supply);
-	if (ret)
-		debug("Can't get VBus regulator!\n");
-
-	return 0;
-}
-
-/*
- * rockchip_dwc3_phy_setup() - Configure USB PHY Interface of DWC3 Core
- * @dwc: Pointer to our controller context structure
- * @dev: Pointer to ulcass device
- */
-static void rockchip_dwc3_phy_setup(struct dwc3 *dwc3_reg,
-				    struct udevice *dev)
-{
-	u32 reg;
-	u32 utmi_bits;
-
-	/* Set dwc3 usb2 phy config */
-	reg = readl(&dwc3_reg->g_usb2phycfg[0]);
-
-	if (dev_read_bool(dev, "snps,dis-enblslpm-quirk"))
-		reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
-
-	utmi_bits = dev_read_u32_default(dev, "snps,phyif-utmi-bits", -1);
-	if (utmi_bits == 16) {
-		reg |= DWC3_GUSB2PHYCFG_PHYIF;
-		reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
-		reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT;
-	} else if (utmi_bits == 8) {
-		reg &= ~DWC3_GUSB2PHYCFG_PHYIF;
-		reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
-		reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT;
-	}
-
-	if (dev_read_bool(dev, "snps,dis-u2-freeclk-exists-quirk"))
-		reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
-
-	if (dev_read_bool(dev, "snps,dis-u2-susphy-quirk"))
-		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
-
-	writel(reg, &dwc3_reg->g_usb2phycfg[0]);
-}
-
-static int rockchip_xhci_core_init(struct rockchip_xhci *rkxhci,
-				   struct udevice *dev)
-{
-	int ret;
-
-	ret = dwc3_core_init(rkxhci->dwc3_reg);
-	if (ret) {
-		pr_err("failed to initialize core\n");
-		return ret;
-	}
-
-	rockchip_dwc3_phy_setup(rkxhci->dwc3_reg, dev);
-
-	/* We are hard-coding DWC3 core to Host Mode */
-	dwc3_set_mode(rkxhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
-
-	return 0;
-}
-
-static int rockchip_xhci_core_exit(struct rockchip_xhci *rkxhci)
-{
-	return 0;
-}
-
-static int xhci_usb_probe(struct udevice *dev)
-{
-	struct rockchip_xhci_platdata *plat = dev_get_platdata(dev);
-	struct rockchip_xhci *ctx = dev_get_priv(dev);
-	struct xhci_hcor *hcor;
-	int ret;
-
-	ctx->hcd = (struct xhci_hccr *)plat->hcd_base;
-	ctx->dwc3_reg = (struct dwc3 *)((char *)(ctx->hcd) + DWC3_REG_OFFSET);
-	hcor = (struct xhci_hcor *)((uint64_t)ctx->hcd +
-			HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase)));
-
-	if (plat->vbus_supply) {
-		ret = regulator_set_enable(plat->vbus_supply, true);
-		if (ret) {
-			pr_err("XHCI: failed to set VBus supply\n");
-			return ret;
-		}
-	}
-
-	ret = rockchip_xhci_core_init(ctx, dev);
-	if (ret) {
-		pr_err("XHCI: failed to initialize controller\n");
-		return ret;
-	}
-
-	return xhci_register(dev, ctx->hcd, hcor);
-}
-
-static int xhci_usb_remove(struct udevice *dev)
-{
-	struct rockchip_xhci_platdata *plat = dev_get_platdata(dev);
-	struct rockchip_xhci *ctx = dev_get_priv(dev);
-	int ret;
-
-	ret = xhci_deregister(dev);
-	if (ret)
-		return ret;
-	ret = rockchip_xhci_core_exit(ctx);
-	if (ret)
-		return ret;
-
-	if (plat->vbus_supply) {
-		ret = regulator_set_enable(plat->vbus_supply, false);
-		if (ret)
-			pr_err("XHCI: failed to set VBus supply\n");
-	}
-
-	return ret;
-}
-
-static const struct udevice_id xhci_usb_ids[] = {
-	{ .compatible = "rockchip,rk3328-xhci" },
-	{ }
-};
-
-U_BOOT_DRIVER(usb_xhci) = {
-	.name	= "xhci_rockchip",
-	.id	= UCLASS_USB,
-	.of_match = xhci_usb_ids,
-	.ofdata_to_platdata = xhci_usb_ofdata_to_platdata,
-	.probe = xhci_usb_probe,
-	.remove = xhci_usb_remove,
-	.ops	= &xhci_usb_ops,
-	.bind	= dm_scan_fdt_dev,
-	.platdata_auto_alloc_size = sizeof(struct rockchip_xhci_platdata),
-	.priv_auto_alloc_size = sizeof(struct rockchip_xhci),
-	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
-};
-
-static const struct udevice_id usb_phy_ids[] = {
-	{ .compatible = "rockchip,rk3328-usb3-phy" },
-	{ }
-};
-
-U_BOOT_DRIVER(usb_phy) = {
-	.name = "usb_phy_rockchip",
-	.of_match = usb_phy_ids,
-};
-- 
2.17.1

  parent reply	other threads:[~2020-04-30  2:17 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-30  2:16 [PATCH v2 0/9] Add Rockchip RK3399 USB3.0 Host support Frank Wang
2020-04-30  2:16 ` [PATCH v2 1/9] usb: dwc3: add dis_enblslpm_quirk Frank Wang
2020-05-01  6:53   ` Jagan Teki
2020-05-06  2:15     ` Frank Wang
2020-04-30  2:16 ` [PATCH v2 2/9] usb: dwc3: add dis_u2_freeclk_exists_quirk Frank Wang
2020-04-30  2:16 ` [PATCH v2 3/9] usb: dwc3: amend UTMI/UTMIW phy interface setup Frank Wang
2020-04-30  2:16 ` [PATCH v2 4/9] usb: dwc3: add make compatible for rockchip platform Frank Wang
2020-04-30  2:17 ` [PATCH v2 5/9] phy: rockchip: add a new driver for type-c phy Frank Wang
2020-05-01  7:17   ` Jagan Teki
2020-05-06  3:09     ` Frank Wang
2020-04-30  2:17 ` Frank Wang [this message]
2020-04-30  2:18 ` [PATCH v2 7/9] ARM: dts: rk3399: amend dwc3 related nodes Frank Wang
2020-05-01  7:23   ` Jagan Teki
2020-04-30  2:18 ` [PATCH v2 8/9] configs: evb-rk3399: slect type-c phy support Frank Wang
2020-04-30  2:18 ` [PATCH v2 9/9] configs: evb-rk3399: update support usb3.0 host Frank Wang
2020-05-01  7:13   ` Jagan Teki
2020-05-01  7:30 ` [PATCH v2 0/9] Add Rockchip RK3399 USB3.0 Host support Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200430021756.25904-1-frank.wang@rock-chips.com \
    --to=frank.wang@rock-chips.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.