[dpdk-dev] [PATCH v3 3/5] app/test-flow-perf: add deletion rate calculation

[Wisam Jaddo <wisamm@mellanox.com>]

Add the ability to test deletion rate for flow performance
application.

This feature is disabled by default, and can be enabled by
add "--deletion-rate" in the application command line options.

Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
---
 app/test-flow-perf/main.c      | 86 ++++++++++++++++++++++++++++++++++
 doc/guides/tools/flow-perf.rst |  4 ++
 2 files changed, 90 insertions(+)

diff --git a/app/test-flow-perf/main.c b/app/test-flow-perf/main.c
index 115af4f302..7c11c0b577 100644
--- a/app/test-flow-perf/main.c
+++ b/app/test-flow-perf/main.c
@@ -62,6 +62,7 @@ static uint16_t flow_actions;
 static uint8_t flow_attrs;
 static volatile bool force_quit;
 static volatile bool dump_iterations;
+static volatile bool delete_flag;
 static struct rte_mempool *mbuf_mp;
 static uint32_t nb_lcores;
 static uint32_t flows_count;
@@ -75,6 +76,8 @@ static void usage(char *progname)
 		" flows to insert, default is 4,000,000\n");
 	printf("  --dump-iterations: To print rates for each"
 		" iteration\n");
+	printf("  --deletion-rate: Enable deletion rate"
+		" calculations\n");
 
 	printf("To set flow attributes:\n");
 	printf("  --ingress: set ingress attribute in flows\n");
@@ -123,6 +126,7 @@ args_parse(int argc, char **argv)
 		{ "help",                       0, 0, 0 },
 		{ "flows-count",                1, 0, 0 },
 		{ "dump-iterations",            0, 0, 0 },
+		{ "deletion-rate",              0, 0, 0 },
 		/* Attributes */
 		{ "ingress",                    0, 0, 0 },
 		{ "egress",                     0, 0, 0 },
@@ -304,6 +308,8 @@ args_parse(int argc, char **argv)
 			}
 			if (!strcmp(lgopts[opt_idx].name, "dump-iterations"))
 				dump_iterations = true;
+			if (!strcmp(lgopts[opt_idx].name, "deletion-rate"))
+				delete_flag = true;
 			break;
 		default:
 			usage(argv[0]);
@@ -323,9 +329,75 @@ print_flow_error(struct rte_flow_error error)
 		error.message ? error.message : "(no stated reason)");
 }
 
+static inline void
+destroy_flows(int port_id, struct rte_flow **flow_list)
+{
+	struct rte_flow_error error;
+	clock_t start_iter, end_iter;
+	double cpu_time_used = 0;
+	double flows_rate;
+	double cpu_time_per_iter[MAX_ITERATIONS];
+	double delta;
+	uint32_t i;
+	int iter_id;
+
+	for (i = 0; i < MAX_ITERATIONS; i++)
+		cpu_time_per_iter[i] = -1;
+
+	if (iterations_number > flows_count)
+		iterations_number = flows_count;
+
+	/* Deletion Rate */
+	printf("Flows Deletion on port = %d\n", port_id);
+	start_iter = clock();
+	for (i = 0; i < flows_count; i++) {
+		if (!flow_list[i])
+			break;
+
+		memset(&error, 0x33, sizeof(error));
+		if (rte_flow_destroy(port_id, flow_list[i], &error)) {
+			print_flow_error(error);
+			rte_exit(EXIT_FAILURE, "Error in deleting flow");
+		}
+
+		if (i && !((i + 1) % iterations_number)) {
+			/* Save the deletion rate of each iter */
+			end_iter = clock();
+			delta = (double) (end_iter - start_iter);
+			iter_id = ((i + 1) / iterations_number) - 1;
+			cpu_time_per_iter[iter_id] =
+				delta / CLOCKS_PER_SEC;
+			cpu_time_used += cpu_time_per_iter[iter_id];
+			start_iter = clock();
+		}
+	}
+
+	/* Deletion rate per iteration */
+	if (dump_iterations)
+		for (i = 0; i < MAX_ITERATIONS; i++) {
+			if (cpu_time_per_iter[i] == -1)
+				continue;
+			delta = (double)(iterations_number /
+				cpu_time_per_iter[i]);
+			flows_rate = delta / 1000;
+			printf(":: Iteration #%d: %d flows "
+				"in %f sec[ Rate = %f K/Sec ]\n",
+				i, iterations_number,
+				cpu_time_per_iter[i], flows_rate);
+		}
+
+	/* Deletion rate for all flows */
+	flows_rate = ((double) (flows_count / cpu_time_used) / 1000);
+	printf("\n:: Total flow deletion rate -> %f K/Sec\n",
+		flows_rate);
+	printf(":: The time for deleting %d in flows %f seconds\n",
+		flows_count, cpu_time_used);
+}
+
 static inline void
 flows_handler(void)
 {
+	struct rte_flow **flow_list;
 	struct rte_flow_error error;
 	clock_t start_iter, end_iter;
 	double cpu_time_used;
@@ -337,6 +409,7 @@ flows_handler(void)
 	int port_id;
 	int iter_id;
 	uint32_t eagain_counter = 0;
+	uint32_t flow_index;
 
 	nr_ports = rte_eth_dev_count_avail();
 
@@ -348,8 +421,14 @@ flows_handler(void)
 
 	printf(":: Flows Count per port: %d\n", flows_count);
 
+	flow_list = rte_zmalloc("flow_list",
+		(sizeof(struct rte_flow *) * flows_count) + 1, 0);
+	if (flow_list == NULL)
+		rte_exit(EXIT_FAILURE, "No Memory available!");
+
 	for (port_id = 0; port_id < nr_ports; port_id++) {
 		cpu_time_used = 0;
+		flow_index = 0;
 		if (flow_group > 0) {
 			/*
 			 * Create global rule to jumo into flow_group
@@ -366,6 +445,7 @@ flows_handler(void)
 				print_flow_error(error);
 				rte_exit(EXIT_FAILURE, "error in creating flow");
 			}
+			flow_list[flow_index++] = flow;
 		}
 
 		/* Insertion Rate */
@@ -389,6 +469,8 @@ flows_handler(void)
 				rte_exit(EXIT_FAILURE, "error in creating flow");
 			}
 
+			flow_list[flow_index++] = flow;
+
 			if (i && !((i + 1) % iterations_number)) {
 				/* Save the insertion rate of each iter */
 				end_iter = clock();
@@ -422,6 +504,9 @@ flows_handler(void)
 		printf(":: The time for creating %d in flows %f seconds\n",
 						flows_count, cpu_time_used);
 		printf(":: EAGAIN counter = %d\n", eagain_counter);
+
+		if (delete_flag)
+			destroy_flows(port_id, flow_list);
 	}
 }
 
@@ -580,6 +665,7 @@ main(int argc, char **argv)
 
 	force_quit = false;
 	dump_iterations = false;
+	delete_flag = false;
 	flows_count = 4000000;
 	iterations_number = 100000;
 	flow_group = 0;
diff --git a/doc/guides/tools/flow-perf.rst b/doc/guides/tools/flow-perf.rst
index 62e038c430..e07e659df5 100644
--- a/doc/guides/tools/flow-perf.rst
+++ b/doc/guides/tools/flow-perf.rst
@@ -18,6 +18,8 @@ give different flow each time, and all other items will have open masks.
 The current design have single core insertion rate. In the future we may
 have a multi core insertion rate measurement support in the app.
 
+The application also provide the ability to measure rte flow deletion rate.
+
 
 Compiling the Application
 =========================
@@ -89,6 +91,8 @@ The command line options are:
 	Print rates for each iteration of flows.
 	Default iteration is 1,00,000.
 
+*	``--deletion-rate``
+	Enable deletion rate calculations.
 
 Attributes:
 
-- 
2.17.1