All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: lee.jones@linaro.org, broonie@kernel.org,
	mturquette@baylibre.com, sboyd@kernel.org, jdelvare@suse.com,
	linux@roeck-us.net, linus.walleij@linaro.org,
	lgirdwood@gmail.com, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, patches@opensource.cirrus.com
Subject: Re: [PATCH 5/6] clk: lochnagar: Move binding over to dtschema
Date: Fri, 1 May 2020 16:03:14 -0500	[thread overview]
Message-ID: <20200501210314.GC24163@bogus> (raw)
In-Reply-To: <20200427102812.23251-5-ckeepax@opensource.cirrus.com>

On Mon, Apr 27, 2020 at 11:28:11AM +0100, Charles Keepax wrote:
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> ---
>  .../devicetree/bindings/clock/cirrus,lochnagar.txt |  94 ---------
>  .../bindings/clock/cirrus,lochnagar.yaml           | 220 +++++++++++++++++++++
>  2 files changed, 220 insertions(+), 94 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml


> diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
> new file mode 100644
> index 0000000000000..55d27e4475333
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
> @@ -0,0 +1,220 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cirrus Logic Lochnagar Audio Development Board
> +
> +maintainers:
> +  - patches@opensource.cirrus.com
> +
> +description: |
> +  Lochnagar is an evaluation and development board for Cirrus Logic
> +  Smart CODEC and Amp devices. It allows the connection of most Cirrus
> +  Logic devices on mini-cards, as well as allowing connection of various
> +  application processor systems to provide a full evaluation platform.
> +  Audio system topology, clocking and power can all be controlled through
> +  the Lochnagar, allowing the device under test to be used in a variety of
> +  possible use cases.
> +
> +  This binding document describes the binding for the clock portion of the
> +  driver.
> +
> +  Also see these documents for generic binding information:
> +    [1] Clock : ../clock/clock-bindings.txt
> +
> +  And these for relevant defines:
> +    [2] include/dt-bindings/clock/lochnagar.h
> +
> +  This binding must be part of the Lochnagar MFD binding:
> +    [3] ../mfd/cirrus,lochnagar.yaml
> +
> +properties:
> +  lochnagar-clk:
> +    type: object
> +
> +    properties:
> +      compatible:
> +        contains:

Drop contains.

> +          enum:
> +            - cirrus,lochnagar1-clk
> +            - cirrus,lochnagar2-clk
> +
> +      '#clock-cells':
> +        description:
> +          Must be 1. The first cell indicates the clock number, see [2] for
> +          available clocks and [1].
> +        const: 1
> +      clock-names:
> +        description: |
> +          May contain entries for each of the following clocks:
> +           - ln-cdc-clkout : Output clock from CODEC card.
> +           - ln-dsp-clkout : Output clock from DSP card.
> +           - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
> +             input audio clocks from host system.
> +           - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
> +             external connector.
> +           - ln-spdif-mclk : Optional input audio clock from SPDIF.
> +           - ln-spdif-clkout : Optional input audio clock from SPDIF.
> +           - ln-adat-mclk : Optional input audio clock from ADAT.
> +           - ln-pmic-32k : On board fixed clock.
> +           - ln-clk-12m : On board fixed clock.
> +           - ln-clk-11m : On board fixed clock.
> +           - ln-clk-24m : On board fixed clock.
> +           - ln-clk-22m : On board fixed clock.
> +           - ln-clk-8m : On board fixed clock.
> +           - ln-usb-clk-24m : On board fixed clock.
> +           - ln-usb-clk-12m : On board fixed clock.

Don't define the list twice. Make the description a comment above or 
after each item below.

> +        items:
> +          enum:
> +            - ln-cdc-clkout
> +            - ln-dsp-clkout
> +            - ln-gf-mclk1
> +            - ln-gf-mclk2
> +            - ln-gf-mclk3
> +            - ln-gf-mclk4
> +            - ln-psia1-mclk
> +            - ln-psia2-mclk
> +            - ln-spdif-mclk
> +            - ln-spdif-clkout
> +            - ln-adat-mclk
> +            - ln-pmic-32k
> +            - ln-clk-12m
> +            - ln-clk-11m
> +            - ln-clk-24m
> +            - ln-clk-22m
> +            - ln-clk-8m
> +            - ln-usb-clk-24m
> +            - ln-usb-clk-12m
> +        minItems: 1
> +        maxItems: 19
> +      clocks: true
> +      assigned-clocks: true
> +      assigned-clock-parents: true
> +
> +    additionalProperties: false
> +
> +    required:
> +      - compatible
> +      - '#clock-cells'
> +
> +  lochnagar-pmic32k:
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - fixed-clock
> +      '#clock-cells':
> +        const: 0
> +      clock-frequency:
> +        const: 32768
> +    required:
> +      - compatible
> +      - '#clock-cells'
> +      - clock-frequency

The fixed-clock.yaml schema will be applied to this. So all you need 
here are addtional constraints:

clock-frequency:
  const: 32768

> +
> +  lochnagar-clk12m:
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - fixed-clock
> +      '#clock-cells':
> +        const: 0
> +      clock-frequency:
> +        const: 12288000
> +    required:
> +      - compatible
> +      - '#clock-cells'
> +      - clock-frequency
> +
> +  lochnagar-clk11m:
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - fixed-clock
> +      '#clock-cells':
> +        const: 0
> +      clock-frequency:
> +        const: 11298600
> +    required:
> +      - compatible
> +      - '#clock-cells'
> +      - clock-frequency
> +
> +  lochnagar-clk24m:
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - fixed-clock
> +      '#clock-cells':
> +        const: 0
> +      clock-frequency:
> +        const: 24576000
> +    required:
> +      - compatible
> +      - '#clock-cells'
> +      - clock-frequency
> +
> +  lochnagar-clk22m:
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - fixed-clock
> +      '#clock-cells':
> +        const: 0
> +      clock-frequency:
> +        const: 22579200
> +    required:
> +      - compatible
> +      - '#clock-cells'
> +      - clock-frequency
> +
> +  lochnagar-clk8m:
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - fixed-clock
> +      '#clock-cells':
> +        const: 0
> +      clock-frequency:
> +        const: 8192000
> +    required:
> +      - compatible
> +      - '#clock-cells'
> +      - clock-frequency
> +
> +  lochnagar-usb24m:
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - fixed-clock
> +      '#clock-cells':
> +        const: 0
> +      clock-frequency:
> +        const: 24576000
> +    required:
> +      - compatible
> +      - '#clock-cells'
> +      - clock-frequency
> +
> +  lochnagar-usb12m:
> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - fixed-clock
> +      '#clock-cells':
> +        const: 0
> +      clock-frequency:
> +        const: 12288000
> +    required:
> +      - compatible
> +      - '#clock-cells'
> +      - clock-frequency
> -- 
> 2.11.0
> 

  reply	other threads:[~2020-05-01 21:03 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-27 10:28 [PATCH 1/6] hwmon: lochnagar: Move binding over to dtschema Charles Keepax
2020-04-27 10:28 ` [PATCH 2/6] ASoC: " Charles Keepax
2020-05-01 21:06   ` Rob Herring
2020-04-27 10:28 ` [PATCH 3/6] pinctrl: " Charles Keepax
2020-05-12 11:40   ` Linus Walleij
2020-04-27 10:28 ` [PATCH 4/6] regulator: " Charles Keepax
2020-04-27 10:28 ` [PATCH 5/6] clk: " Charles Keepax
2020-05-01 21:03   ` Rob Herring [this message]
2020-04-27 10:28 ` [PATCH 6/6] mfd: " Charles Keepax
2020-04-27 10:36   ` Charles Keepax
2020-05-01 20:47     ` Rob Herring
2020-05-04  9:55       ` Charles Keepax
2020-05-01 20:55   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200501210314.GC24163@bogus \
    --to=robh@kernel.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mturquette@baylibre.com \
    --cc=patches@opensource.cirrus.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.