From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Fan Date: Sun, 3 May 2020 22:19:55 +0800 Subject: [PATCH 11/13] imx8mp: Set default SNSR25C for TMU probe1 In-Reply-To: <20200503141957.14635-1-peng.fan@nxp.com> References: <20200503141957.14635-1-peng.fan@nxp.com> Message-ID: <20200503141957.14635-12-peng.fan@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Ye Li So far u-boot only load SNSR25C for TMU main probe (probe 0). However, kernel enables two probes. So it also needs to set default SNSR25C of TCALIV1 for blank samples. Reviewed-by: Peng Fan Signed-off-by: Ye Li Signed-off-by: Peng Fan --- arch/arm/mach-imx/imx8m/soc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index adb444b240..c1e0f01f90 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -443,7 +443,9 @@ void imx_tmu_arch_init(void *reg_base) !fuse->ana_trim4 && !fuse2->ana_trim5) { /* Use a default 25C binary codes */ tca25[0] = 1596; + tca25[1] = 1596; writel(tca25[0], (ulong)reg_base + 0x30); + writel(tca25[1], (ulong)reg_base + 0x34); return; } -- 2.16.4