[PATCH v4 09/11] iio: light: cm32181: Make lux_per_bit and lux_per_bit_base_it runtime settings

[Hans de Goede <hdegoede@redhat.com>]

Make lux_per_bit and lux_per_bit_base_it settings stored in struct
cm32181_chip instead of a hardcoded (defined) values.

This is a preparation patch for reading some ACPI tables which specify
a device specific lux_per_bit value.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/iio/light/cm32181.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
index 59c95e22ad00..a0812e3cba9b 100644
--- a/drivers/iio/light/cm32181.c
+++ b/drivers/iio/light/cm32181.c
@@ -67,6 +67,8 @@ struct cm32181_chip {
 	u16 conf_regs[CM32181_CONF_REG_NUM];
 	unsigned long init_regs_bitmap;
 	int calibscale;
+	int lux_per_bit;
+	int lux_per_bit_base_it;
 };
 
 /* CM3218 Family */
@@ -129,6 +131,8 @@ static int cm32181_reg_init(struct cm32181_chip *cm32181)
 			CM32181_CMD_ALS_IT_DEFAULT | CM32181_CMD_ALS_SM_DEFAULT;
 	cm32181->init_regs_bitmap = BIT(CM32181_REG_ADDR_CMD);
 	cm32181->calibscale = CM32181_CALIBSCALE_DEFAULT;
+	cm32181->lux_per_bit = CM32181_LUX_PER_BIT;
+	cm32181->lux_per_bit_base_it = CM32181_LUX_PER_BIT_BASE_IT;
 
 	/* Initialize registers*/
 	for_each_set_bit(i, &cm32181->init_regs_bitmap, CM32181_CONF_REG_NUM) {
@@ -225,8 +229,8 @@ static int cm32181_get_lux(struct cm32181_chip *cm32181)
 	if (ret < 0)
 		return -EINVAL;
 
-	lux = CM32181_LUX_PER_BIT;
-	lux *= CM32181_LUX_PER_BIT_BASE_IT;
+	lux = cm32181->lux_per_bit;
+	lux *= cm32181->lux_per_bit_base_it;
 	lux = div_u64(lux, als_it);
 
 	ret = i2c_smbus_read_word_data(client, CM32181_REG_ADDR_ALS);
-- 
2.26.0