From mboxrd@z Thu Jan 1 00:00:00 1970 From: Zhiqiang Hou Date: Tue, 5 May 2020 19:38:06 +0800 Subject: [PATCH 05/13] configs: p1_p2_rdb: Add the default address of vsc7385 firmware In-Reply-To: <20200505113814.39047-1-Zhiqiang.Hou@nxp.com> References: <20200505113814.39047-1-Zhiqiang.Hou@nxp.com> Message-ID: <20200505113814.39047-6-Zhiqiang.Hou@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Hou Zhiqiang Add the environment 'vscfw_addr' to assign a default address for vsc7385 firmware uploading. Signed-off-by: Hou Zhiqiang --- include/configs/p1_p2_rdb_pc.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index c42f1a9fce..b2fdf47104 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -460,6 +460,7 @@ /* Vsc7385 switch */ #ifdef CONFIG_VSC7385_ENET +#define __VSCFW_ADDR "vscfw_addr=ef000000" #define CONFIG_SYS_VSC7385_BASE 0xffb00000 #ifdef CONFIG_PHYS_64BIT @@ -813,6 +814,7 @@ i2c mw 18 3 __SW_BOOT_MASK 1; reset "ramdisk_size=120000\0" \ "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \ "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \ +__stringify(__VSCFW_ADDR)"\0" \ __stringify(__NOR_RST_CMD)"\0" \ __stringify(__SPI_RST_CMD)"\0" \ __stringify(__SD_RST_CMD)"\0" \ -- 2.17.1