[PATCH v9 1/3] serial: samsung: Replace rd_regb/wr_regb with rd_reg/wr_reg

[PATCH v9 1/3] serial: samsung: Replace rd_regb/wr_regb with rd_reg/wr_reg

[Hyunki Koo]

This patch change the name of macro for general usage.

Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
---
 drivers/tty/serial/samsung_tty.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 73f951d65b93..326b0164609c 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -154,10 +154,10 @@ struct s3c24xx_uart_port {
 #define portaddrl(port, reg) \
 	((unsigned long *)(unsigned long)((port)->membase + (reg)))
 
-#define rd_regb(port, reg) (readb_relaxed(portaddr(port, reg)))
+#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg)))
 #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
 
-#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
+#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
 #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
 
 /* Byte-order aware bit setting/clearing functions. */
@@ -714,7 +714,7 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
 		fifocnt--;
 
 		uerstat = rd_regl(port, S3C2410_UERSTAT);
-		ch = rd_regb(port, S3C2410_URXH);
+		ch = rd_reg(port, S3C2410_URXH);
 
 		if (port->flags & UPF_CONS_FLOW) {
 			int txe = s3c24xx_serial_txempty_nofifo(port);
@@ -826,7 +826,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 	}
 
 	if (port->x_char) {
-		wr_regb(port, S3C2410_UTXH, port->x_char);
+		wr_reg(port, S3C2410_UTXH, port->x_char);
 		port->icount.tx++;
 		port->x_char = 0;
 		goto out;
@@ -852,7 +852,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 		if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
 			break;
 
-		wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
+		wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
 		count--;
@@ -916,7 +916,7 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
 /* no modem control lines */
 static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
 {
-	unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
+	unsigned int umstat = rd_reg(port, S3C2410_UMSTAT);
 
 	if (umstat & S3C2410_UMSTAT_CTS)
 		return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
@@ -2185,7 +2185,7 @@ static int s3c24xx_serial_get_poll_char(struct uart_port *port)
 	if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
 		return NO_POLL_CHAR;
 
-	return rd_regb(port, S3C2410_URXH);
+	return rd_reg(port, S3C2410_URXH);
 }
 
 static void s3c24xx_serial_put_poll_char(struct uart_port *port,
@@ -2200,7 +2200,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
 
 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
 		cpu_relax();
-	wr_regb(port, S3C2410_UTXH, c);
+	wr_reg(port, S3C2410_UTXH, c);
 }
 
 #endif /* CONFIG_CONSOLE_POLL */
@@ -2212,7 +2212,7 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
 
 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
 		cpu_relax();
-	wr_regb(port, S3C2410_UTXH, ch);
+	wr_reg(port, S3C2410_UTXH, ch);
 }
 
 static void
-- 
2.15.0.rc1

[PATCH v9 1/3] serial: samsung: Replace rd_regb/wr_regb with rd_reg/wr_reg

[Hyunki Koo]

This patch change the name of macro for general usage.

Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
---
 drivers/tty/serial/samsung_tty.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 73f951d65b93..326b0164609c 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -154,10 +154,10 @@ struct s3c24xx_uart_port {
 #define portaddrl(port, reg) \
 	((unsigned long *)(unsigned long)((port)->membase + (reg)))
 
-#define rd_regb(port, reg) (readb_relaxed(portaddr(port, reg)))
+#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg)))
 #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
 
-#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
+#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
 #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
 
 /* Byte-order aware bit setting/clearing functions. */
@@ -714,7 +714,7 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
 		fifocnt--;
 
 		uerstat = rd_regl(port, S3C2410_UERSTAT);
-		ch = rd_regb(port, S3C2410_URXH);
+		ch = rd_reg(port, S3C2410_URXH);
 
 		if (port->flags & UPF_CONS_FLOW) {
 			int txe = s3c24xx_serial_txempty_nofifo(port);
@@ -826,7 +826,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 	}
 
 	if (port->x_char) {
-		wr_regb(port, S3C2410_UTXH, port->x_char);
+		wr_reg(port, S3C2410_UTXH, port->x_char);
 		port->icount.tx++;
 		port->x_char = 0;
 		goto out;
@@ -852,7 +852,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 		if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
 			break;
 
-		wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
+		wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
 		count--;
@@ -916,7 +916,7 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
 /* no modem control lines */
 static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
 {
-	unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
+	unsigned int umstat = rd_reg(port, S3C2410_UMSTAT);
 
 	if (umstat & S3C2410_UMSTAT_CTS)
 		return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
@@ -2185,7 +2185,7 @@ static int s3c24xx_serial_get_poll_char(struct uart_port *port)
 	if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
 		return NO_POLL_CHAR;
 
-	return rd_regb(port, S3C2410_URXH);
+	return rd_reg(port, S3C2410_URXH);
 }
 
 static void s3c24xx_serial_put_poll_char(struct uart_port *port,
@@ -2200,7 +2200,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
 
 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
 		cpu_relax();
-	wr_regb(port, S3C2410_UTXH, c);
+	wr_reg(port, S3C2410_UTXH, c);
 }
 
 #endif /* CONFIG_CONSOLE_POLL */
@@ -2212,7 +2212,7 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
 
 	while (!s3c24xx_serial_console_txrdy(port, ufcon))
 		cpu_relax();
-	wr_regb(port, S3C2410_UTXH, ch);
+	wr_reg(port, S3C2410_UTXH, ch);
 }
 
 static void
-- 
2.15.0.rc1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v9 2/3] dt-bindings: serial: Add reg-io-width compatible

[Hyunki Koo]

Add a description for reg-io-width options for the samsung serial
UART peripheral.

Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
---
 Documentation/devicetree/bindings/serial/samsung_uart.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index 9d2ce347875b..a57b1233c691 100644
--- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -29,6 +29,14 @@ properties:
   reg:
     maxItems: 1
 
+  reg-io-width:
+    description: |
+      The size (in bytes) of the IO accesses that should be performed
+      on the device.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 1, 4 ]
+
   clocks:
     minItems: 2
     maxItems: 5
-- 
2.15.0.rc1

[PATCH v9 3/3] tty: samsung_tty: 32-bit access for TX/RX hold registers

[Hyunki Koo]

Support 32-bit access for the TX/RX hold registers UTXH and URXH.

This is required for some newer SoCs.

Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
---
 drivers/tty/serial/samsung_tty.c | 62 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 57 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 326b0164609c..6ef614d8648c 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -154,10 +154,33 @@ struct s3c24xx_uart_port {
 #define portaddrl(port, reg) \
 	((unsigned long *)(unsigned long)((port)->membase + (reg)))
 
-#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg)))
+static u32 rd_reg(struct uart_port *port, u32 reg)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		return readb_relaxed(portaddr(port, reg));
+	case UPIO_MEM32:
+		return readl_relaxed(portaddr(port, reg));
+	default:
+		return 0;
+	}
+	return 0;
+}
+
 #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
 
-#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
+static void wr_reg(struct uart_port *port, u32 reg, u32 val)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		writeb_relaxed(val, portaddr(port, reg));
+		break;
+	case UPIO_MEM32:
+		writel_relaxed(val, portaddr(port, reg));
+		break;
+	}
+}
+
 #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
 
 /* Byte-order aware bit setting/clearing functions. */
@@ -1974,7 +1997,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct s3c24xx_uart_port *ourport;
 	int index = probe_index;
-	int ret;
+	int ret, prop = 0;
 
 	if (np) {
 		ret = of_alias_get_id(np, "serial");
@@ -2000,10 +2023,27 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 			dev_get_platdata(&pdev->dev) :
 			ourport->drv_data->def_cfg;
 
-	if (np)
+	if (np) {
 		of_property_read_u32(np,
 			"samsung,uart-fifosize", &ourport->port.fifosize);
 
+		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+			switch (prop) {
+			case 1:
+				ourport->port.iotype = UPIO_MEM;
+				break;
+			case 4:
+				ourport->port.iotype = UPIO_MEM32;
+				break;
+			default:
+				dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
+						prop);
+				ret = -EINVAL;
+				break;
+			}
+		}
+	}
+
 	if (ourport->drv_data->fifosize[index])
 		ourport->port.fifosize = ourport->drv_data->fifosize[index];
 	else if (ourport->info->fifosize)
@@ -2587,6 +2627,18 @@ module_platform_driver(samsung_serial_driver);
  * Early console.
  */
 
+static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		writeb(val, portaddr(port, reg));
+		break;
+	case UPIO_MEM32:
+		writel(val, portaddr(port, reg));
+		break;
+	}
+}
+
 struct samsung_early_console_data {
 	u32 txfull_mask;
 };
@@ -2612,7 +2664,7 @@ static void samsung_early_putc(struct uart_port *port, int c)
 	else
 		samsung_early_busyuart(port);
 
-	writeb(c, port->membase + S3C2410_UTXH);
+	wr_reg_barrier(port, S3C2410_UTXH, c);
 }
 
 static void samsung_early_write(struct console *con, const char *s,
-- 
2.15.0.rc1

[PATCH v9 3/3] tty: samsung_tty: 32-bit access for TX/RX hold registers

[Hyunki Koo]

Support 32-bit access for the TX/RX hold registers UTXH and URXH.

This is required for some newer SoCs.

Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
---
 drivers/tty/serial/samsung_tty.c | 62 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 57 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 326b0164609c..6ef614d8648c 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -154,10 +154,33 @@ struct s3c24xx_uart_port {
 #define portaddrl(port, reg) \
 	((unsigned long *)(unsigned long)((port)->membase + (reg)))
 
-#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg)))
+static u32 rd_reg(struct uart_port *port, u32 reg)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		return readb_relaxed(portaddr(port, reg));
+	case UPIO_MEM32:
+		return readl_relaxed(portaddr(port, reg));
+	default:
+		return 0;
+	}
+	return 0;
+}
+
 #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
 
-#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
+static void wr_reg(struct uart_port *port, u32 reg, u32 val)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		writeb_relaxed(val, portaddr(port, reg));
+		break;
+	case UPIO_MEM32:
+		writel_relaxed(val, portaddr(port, reg));
+		break;
+	}
+}
+
 #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
 
 /* Byte-order aware bit setting/clearing functions. */
@@ -1974,7 +1997,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct s3c24xx_uart_port *ourport;
 	int index = probe_index;
-	int ret;
+	int ret, prop = 0;
 
 	if (np) {
 		ret = of_alias_get_id(np, "serial");
@@ -2000,10 +2023,27 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 			dev_get_platdata(&pdev->dev) :
 			ourport->drv_data->def_cfg;
 
-	if (np)
+	if (np) {
 		of_property_read_u32(np,
 			"samsung,uart-fifosize", &ourport->port.fifosize);
 
+		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+			switch (prop) {
+			case 1:
+				ourport->port.iotype = UPIO_MEM;
+				break;
+			case 4:
+				ourport->port.iotype = UPIO_MEM32;
+				break;
+			default:
+				dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
+						prop);
+				ret = -EINVAL;
+				break;
+			}
+		}
+	}
+
 	if (ourport->drv_data->fifosize[index])
 		ourport->port.fifosize = ourport->drv_data->fifosize[index];
 	else if (ourport->info->fifosize)
@@ -2587,6 +2627,18 @@ module_platform_driver(samsung_serial_driver);
  * Early console.
  */
 
+static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		writeb(val, portaddr(port, reg));
+		break;
+	case UPIO_MEM32:
+		writel(val, portaddr(port, reg));
+		break;
+	}
+}
+
 struct samsung_early_console_data {
 	u32 txfull_mask;
 };
@@ -2612,7 +2664,7 @@ static void samsung_early_putc(struct uart_port *port, int c)
 	else
 		samsung_early_busyuart(port);
 
-	writeb(c, port->membase + S3C2410_UTXH);
+	wr_reg_barrier(port, S3C2410_UTXH, c);
 }
 
 static void samsung_early_write(struct console *con, const char *s,
-- 
2.15.0.rc1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v9 2/3] dt-bindings: serial: Add reg-io-width compatible

[Greg Kroah-Hartman]

On Wed, May 06, 2020 at 04:00:06PM +0900, Hyunki Koo wrote:
> Add a description for reg-io-width options for the samsung serial
> UART peripheral.
> 
> Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
> ---
>  Documentation/devicetree/bindings/serial/samsung_uart.yaml | 8 ++++++++
>  1 file changed, 8 insertions(+)

You dropped the reviewed-by tag that Rob gave on the previous version of
this patch.

Please put that back and resend.

thanks,

greg k-h

RE: [PATCH v9 2/3] dt-bindings: serial: Add reg-io-width compatible

[Hyunki Koo]

On Tuesday, May 5, 2020 at 2020 4:33:00 PM +0900, Greg Kroah-Hartman
> On Wed, May 06, 2020 at 04:00:06PM +0900, Hyunki Koo wrote:
> > Add a description for reg-io-width options for the samsung serial UART
> > peripheral.
> >
> > Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
> > ---
> >  Documentation/devicetree/bindings/serial/samsung_uart.yaml | 8
> > ++++++++
> >  1 file changed, 8 insertions(+)
> 
> You dropped the reviewed-by tag that Rob gave on the previous version
> of this patch.
> 
> Please put that back and resend.
> 
> thanks,
> 
> greg k-h

Thank you for your comment
I add review tag by Krzysztof Kozlowski  in all other patches not only patch2/3

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested on Odroid HC1 (Exynos5422):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>