All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bhaumik Bhatt <bbhatt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	hemantk@codeaurora.org, jhugo@codeaurora.org
Subject: Re: [PATCH v7 5/8] bus: mhi: core: Handle firmware load using state worker
Date: Sat, 9 May 2020 11:19:46 +0530	[thread overview]
Message-ID: <20200509054946.GE5845@Mani-XPS-13-9360> (raw)
In-Reply-To: <1588991208-26928-6-git-send-email-bbhatt@codeaurora.org>

On Fri, May 08, 2020 at 07:26:45PM -0700, Bhaumik Bhatt wrote:
> Upon power up, driver queues firmware worker thread if the execution
> environment is PBL. Firmware worker is blocked with a timeout until
> state worker gets a chance to run and unblock firmware worker. An
> endpoint power up failure can be seen if state worker gets a chance to
> run after firmware worker has timed out. Remove this dependency and
> handle firmware load directly using state worker thread.
> 
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
>  drivers/bus/mhi/core/boot.c     | 18 +++---------------
>  drivers/bus/mhi/core/init.c     |  1 -
>  drivers/bus/mhi/core/internal.h |  1 +
>  drivers/bus/mhi/core/pm.c       |  6 +-----
>  include/linux/mhi.h             |  2 --
>  5 files changed, 5 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
> index ebad5eb..17c636b 100644
> --- a/drivers/bus/mhi/core/boot.c
> +++ b/drivers/bus/mhi/core/boot.c
> @@ -377,30 +377,18 @@ static void mhi_firmware_copy(struct mhi_controller *mhi_cntrl,
>  	}
>  }
>  
> -void mhi_fw_load_worker(struct work_struct *work)
> +void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
>  {
> -	struct mhi_controller *mhi_cntrl;
>  	const struct firmware *firmware = NULL;
>  	struct image_info *image_info;
> -	struct device *dev;
> +	struct device *dev = &mhi_cntrl->mhi_dev->dev;
>  	const char *fw_name;
>  	void *buf;
>  	dma_addr_t dma_addr;
>  	size_t size;
>  	int ret;
>  
> -	mhi_cntrl = container_of(work, struct mhi_controller, fw_worker);
> -	dev = &mhi_cntrl->mhi_dev->dev;
> -
> -	dev_dbg(dev, "Waiting for device to enter PBL from: %s\n",
> -		TO_MHI_EXEC_STR(mhi_cntrl->ee));
> -
> -	ret = wait_event_timeout(mhi_cntrl->state_event,
> -				 MHI_IN_PBL(mhi_cntrl->ee) ||
> -				 MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
> -				 msecs_to_jiffies(mhi_cntrl->timeout_ms));
> -
> -	if (!ret || MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
> +	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
>  		dev_err(dev, "Device MHI is not in valid state\n");
>  		return;
>  	}
> diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
> index 1a93d24..6882206 100644
> --- a/drivers/bus/mhi/core/init.c
> +++ b/drivers/bus/mhi/core/init.c
> @@ -835,7 +835,6 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
>  	spin_lock_init(&mhi_cntrl->wlock);
>  	INIT_WORK(&mhi_cntrl->st_worker, mhi_pm_st_worker);
>  	INIT_WORK(&mhi_cntrl->syserr_worker, mhi_pm_sys_err_worker);
> -	INIT_WORK(&mhi_cntrl->fw_worker, mhi_fw_load_worker);
>  	init_waitqueue_head(&mhi_cntrl->state_event);
>  
>  	mhi_cmd = mhi_cntrl->mhi_cmd;
> diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
> index 40c47f9..0965ca3 100644
> --- a/drivers/bus/mhi/core/internal.h
> +++ b/drivers/bus/mhi/core/internal.h
> @@ -627,6 +627,7 @@ void mhi_ring_chan_db(struct mhi_controller *mhi_cntrl,
>  void mhi_deinit_free_irq(struct mhi_controller *mhi_cntrl);
>  void mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
>  		      struct image_info *img_info);
> +void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl);
>  int mhi_prepare_channel(struct mhi_controller *mhi_cntrl,
>  			struct mhi_chan *mhi_chan);
>  int mhi_init_chan_ctxt(struct mhi_controller *mhi_cntrl,
> diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
> index e7c8318..3cc238a 100644
> --- a/drivers/bus/mhi/core/pm.c
> +++ b/drivers/bus/mhi/core/pm.c
> @@ -528,7 +528,6 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,
>  	dev_dbg(dev, "Waiting for all pending threads to complete\n");
>  	wake_up_all(&mhi_cntrl->state_event);
>  	flush_work(&mhi_cntrl->st_worker);
> -	flush_work(&mhi_cntrl->fw_worker);
>  
>  	dev_dbg(dev, "Reset all active channels and remove MHI devices\n");
>  	device_for_each_child(mhi_cntrl->cntrl_dev, NULL, mhi_destroy_device);
> @@ -643,7 +642,7 @@ void mhi_pm_st_worker(struct work_struct *work)
>  				mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
>  			write_unlock_irq(&mhi_cntrl->pm_lock);
>  			if (MHI_IN_PBL(mhi_cntrl->ee))
> -				wake_up_all(&mhi_cntrl->state_event);
> +				mhi_fw_load_handler(mhi_cntrl);
>  			break;
>  		case DEV_ST_TRANSITION_SBL:
>  			write_lock_irq(&mhi_cntrl->pm_lock);
> @@ -976,9 +975,6 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
>  	next_state = MHI_IN_PBL(current_ee) ?
>  		DEV_ST_TRANSITION_PBL : DEV_ST_TRANSITION_READY;
>  
> -	if (next_state == DEV_ST_TRANSITION_PBL)
> -		schedule_work(&mhi_cntrl->fw_worker);
> -
>  	mhi_queue_state_transition(mhi_cntrl, next_state);
>  
>  	mutex_unlock(&mhi_cntrl->pm_mutex);
> diff --git a/include/linux/mhi.h b/include/linux/mhi.h
> index e909b8f..2b20b9c 100644
> --- a/include/linux/mhi.h
> +++ b/include/linux/mhi.h
> @@ -331,7 +331,6 @@ struct mhi_controller_config {
>   * @wlock: Lock for protecting device wakeup
>   * @mhi_link_info: Device bandwidth info
>   * @st_worker: State transition worker
> - * @fw_worker: Firmware download worker
>   * @syserr_worker: System error worker
>   * @state_event: State change event
>   * @status_cb: CB function to notify power states of the device (required)
> @@ -412,7 +411,6 @@ struct mhi_controller {
>  	spinlock_t wlock;
>  	struct mhi_link_info mhi_link_info;
>  	struct work_struct st_worker;
> -	struct work_struct fw_worker;
>  	struct work_struct syserr_worker;
>  	wait_queue_head_t state_event;
>  
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

  reply	other threads:[~2020-05-09  5:49 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-09  2:26 [PATCH v7 0/8] Bug fixes and improved logging in MHI Bhaumik Bhatt
2020-05-09  2:26 ` [PATCH v7 1/8] bus: mhi: core: Refactor mhi queue APIs Bhaumik Bhatt
2020-05-09  5:46   ` Manivannan Sadhasivam
2020-05-09  2:26 ` [PATCH v7 2/8] bus: mhi: core: Cache intmod from mhi event to mhi channel Bhaumik Bhatt
2020-05-09  5:47   ` Manivannan Sadhasivam
2020-05-09  2:26 ` [PATCH v7 3/8] bus: mhi: core: Add range check for channel id received in event ring Bhaumik Bhatt
2020-05-09  5:48   ` Manivannan Sadhasivam
2020-05-09  2:26 ` [PATCH v7 4/8] bus: mhi: core: Read transfer length from an event properly Bhaumik Bhatt
2020-05-09  5:49   ` Manivannan Sadhasivam
2020-05-09  2:26 ` [PATCH v7 5/8] bus: mhi: core: Handle firmware load using state worker Bhaumik Bhatt
2020-05-09  5:49   ` Manivannan Sadhasivam [this message]
2020-05-09  2:26 ` [PATCH v7 6/8] bus: mhi: core: Return appropriate error codes for AMSS load failure Bhaumik Bhatt
2020-05-09  5:50   ` Manivannan Sadhasivam
2020-05-09  2:26 ` [PATCH v7 7/8] bus: mhi: core: Improve debug logs for loading firmware Bhaumik Bhatt
2020-05-09  5:50   ` Manivannan Sadhasivam
2020-05-09  2:26 ` [PATCH v7 8/8] bus: mhi: core: Ensure non-zero session or sequence ID values are used Bhaumik Bhatt
2020-05-09  5:51   ` Manivannan Sadhasivam
2020-05-09  8:32 ` [PATCH v7 0/8] Bug fixes and improved logging in MHI Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200509054946.GE5845@Mani-XPS-13-9360 \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=bbhatt@codeaurora.org \
    --cc=hemantk@codeaurora.org \
    --cc=jhugo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.