[PATCH v2 00/14] mediatek: add support for MediaTek Ethernet MAC

[PATCH v2 00/14] mediatek: add support for MediaTek Ethernet MAC

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds support for the Ethernet Controller present on MediaTeK SoCs
from the MT8* family.

The first two patches add binding documents for the PERICFG syscon and
for the MAC itself.

Patches 3/14 & 4/14 do some cleanup of the mediatek ethernet drivers
directory.

Patch 5/14 provides a new helper that allows to retrieve the address of
the net_device associated with given private data address.

Patches 6-8/14 introduce the managed variant of register_netdev().

Patch 9/11 adds the new ethernet driver.

The rest of the patches add DT fixups for the boards already supported
upstream.

v1 -> v2:
- add a generic helper for retrieving the net_device associated with given
  private data
- fix several typos in commit messages
- remove MTK_MAC_VERSION and don't set the driver version
- use NET_IP_ALIGN instead of a magic number (2) but redefine it as it defaults
  to 0 on arm64
- don't manually turn the carrier off in mtk_mac_enable()
- process TX cleanup in napi poll callback
- configure pause in the adjust_link callback
- use regmap_read_poll_timeout() instead of handcoding the polling
- use devres_find() to verify that struct net_device is managed by devres in
  devm_register_netdev()
- add a patch moving all networking devres helpers into net/devres.c
- tweak the dma barriers: remove where unnecessary and add comments to the
  remaining barriers
- don't reset internal counters when enabling the NIC
- set the net_device's mtu size instead of checking the framesize in
  ndo_start_xmit() callback
- fix a race condition in waking up the netif queue
- don't emit log messages on OOM errors
- use dma_set_mask_and_coherent()
- use eth_hw_addr_random()
- rework the receive callback so that we reuse the previous skb if unmapping
  fails, like we already do if skb allocation fails
- rework hash table operations: add proper timeout handling and clear bits when
  appropriate

Bartosz Golaszewski (14):
  dt-bindings: arm: add a binding document for MediaTek PERICFG
    controller
  dt-bindings: net: add a binding document for MediaTek Ethernet MAC
  net: ethernet: mediatek: rename Kconfig prompt
  net: ethernet: mediatek: remove unnecessary spaces from Makefile
  net: core: provide priv_to_netdev()
  net: move devres helpers into a separate source file
  net: devres: define a separate devres structure for
    devm_alloc_etherdev()
  net: devres: provide devm_register_netdev()
  net: ethernet: mtk-eth-mac: new driver
  ARM64: dts: mediatek: add pericfg syscon to mt8516.dtsi
  ARM64: dts: mediatek: add the ethernet node to mt8516.dtsi
  ARM64: dts: mediatek: add an alias for ethernet0 for pumpkin boards
  ARM64: dts: mediatek: add ethernet pins for pumpkin boards
  ARM64: dts: mediatek: enable ethernet on pumpkin boards

 .../arm/mediatek/mediatek,pericfg.yaml        |   34 +
 .../bindings/net/mediatek,eth-mac.yaml        |   80 +
 arch/arm64/boot/dts/mediatek/mt8516.dtsi      |   17 +
 .../boot/dts/mediatek/pumpkin-common.dtsi     |   34 +
 drivers/net/ethernet/mediatek/Kconfig         |    8 +-
 drivers/net/ethernet/mediatek/Makefile        |    3 +-
 drivers/net/ethernet/mediatek/mtk_eth_mac.c   | 1561 +++++++++++++++++
 include/linux/netdevice.h                     |   14 +
 net/Makefile                                  |    2 +-
 net/devres.c                                  |   95 +
 net/ethernet/eth.c                            |   28 -
 11 files changed, 1845 insertions(+), 31 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
 create mode 100644 Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml
 create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_mac.c
 create mode 100644 net/devres.c

-- 
2.25.0

[PATCH v2 00/14] mediatek: add support for MediaTek Ethernet MAC

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds support for the Ethernet Controller present on MediaTeK SoCs
from the MT8* family.

The first two patches add binding documents for the PERICFG syscon and
for the MAC itself.

Patches 3/14 & 4/14 do some cleanup of the mediatek ethernet drivers
directory.

Patch 5/14 provides a new helper that allows to retrieve the address of
the net_device associated with given private data address.

Patches 6-8/14 introduce the managed variant of register_netdev().

Patch 9/11 adds the new ethernet driver.

The rest of the patches add DT fixups for the boards already supported
upstream.

v1 -> v2:
- add a generic helper for retrieving the net_device associated with given
  private data
- fix several typos in commit messages
- remove MTK_MAC_VERSION and don't set the driver version
- use NET_IP_ALIGN instead of a magic number (2) but redefine it as it defaults
  to 0 on arm64
- don't manually turn the carrier off in mtk_mac_enable()
- process TX cleanup in napi poll callback
- configure pause in the adjust_link callback
- use regmap_read_poll_timeout() instead of handcoding the polling
- use devres_find() to verify that struct net_device is managed by devres in
  devm_register_netdev()
- add a patch moving all networking devres helpers into net/devres.c
- tweak the dma barriers: remove where unnecessary and add comments to the
  remaining barriers
- don't reset internal counters when enabling the NIC
- set the net_device's mtu size instead of checking the framesize in
  ndo_start_xmit() callback
- fix a race condition in waking up the netif queue
- don't emit log messages on OOM errors
- use dma_set_mask_and_coherent()
- use eth_hw_addr_random()
- rework the receive callback so that we reuse the previous skb if unmapping
  fails, like we already do if skb allocation fails
- rework hash table operations: add proper timeout handling and clear bits when
  appropriate

Bartosz Golaszewski (14):
  dt-bindings: arm: add a binding document for MediaTek PERICFG
    controller
  dt-bindings: net: add a binding document for MediaTek Ethernet MAC
  net: ethernet: mediatek: rename Kconfig prompt
  net: ethernet: mediatek: remove unnecessary spaces from Makefile
  net: core: provide priv_to_netdev()
  net: move devres helpers into a separate source file
  net: devres: define a separate devres structure for
    devm_alloc_etherdev()
  net: devres: provide devm_register_netdev()
  net: ethernet: mtk-eth-mac: new driver
  ARM64: dts: mediatek: add pericfg syscon to mt8516.dtsi
  ARM64: dts: mediatek: add the ethernet node to mt8516.dtsi
  ARM64: dts: mediatek: add an alias for ethernet0 for pumpkin boards
  ARM64: dts: mediatek: add ethernet pins for pumpkin boards
  ARM64: dts: mediatek: enable ethernet on pumpkin boards

 .../arm/mediatek/mediatek,pericfg.yaml        |   34 +
 .../bindings/net/mediatek,eth-mac.yaml        |   80 +
 arch/arm64/boot/dts/mediatek/mt8516.dtsi      |   17 +
 .../boot/dts/mediatek/pumpkin-common.dtsi     |   34 +
 drivers/net/ethernet/mediatek/Kconfig         |    8 +-
 drivers/net/ethernet/mediatek/Makefile        |    3 +-
 drivers/net/ethernet/mediatek/mtk_eth_mac.c   | 1561 +++++++++++++++++
 include/linux/netdevice.h                     |   14 +
 net/Makefile                                  |    2 +-
 net/devres.c                                  |   95 +
 net/ethernet/eth.c                            |   28 -
 11 files changed, 1845 insertions(+), 31 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
 create mode 100644 Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml
 create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_mac.c
 create mode 100644 net/devres.c

-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 00/14] mediatek: add support for MediaTek Ethernet MAC

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds support for the Ethernet Controller present on MediaTeK SoCs
from the MT8* family.

The first two patches add binding documents for the PERICFG syscon and
for the MAC itself.

Patches 3/14 & 4/14 do some cleanup of the mediatek ethernet drivers
directory.

Patch 5/14 provides a new helper that allows to retrieve the address of
the net_device associated with given private data address.

Patches 6-8/14 introduce the managed variant of register_netdev().

Patch 9/11 adds the new ethernet driver.

The rest of the patches add DT fixups for the boards already supported
upstream.

v1 -> v2:
- add a generic helper for retrieving the net_device associated with given
  private data
- fix several typos in commit messages
- remove MTK_MAC_VERSION and don't set the driver version
- use NET_IP_ALIGN instead of a magic number (2) but redefine it as it defaults
  to 0 on arm64
- don't manually turn the carrier off in mtk_mac_enable()
- process TX cleanup in napi poll callback
- configure pause in the adjust_link callback
- use regmap_read_poll_timeout() instead of handcoding the polling
- use devres_find() to verify that struct net_device is managed by devres in
  devm_register_netdev()
- add a patch moving all networking devres helpers into net/devres.c
- tweak the dma barriers: remove where unnecessary and add comments to the
  remaining barriers
- don't reset internal counters when enabling the NIC
- set the net_device's mtu size instead of checking the framesize in
  ndo_start_xmit() callback
- fix a race condition in waking up the netif queue
- don't emit log messages on OOM errors
- use dma_set_mask_and_coherent()
- use eth_hw_addr_random()
- rework the receive callback so that we reuse the previous skb if unmapping
  fails, like we already do if skb allocation fails
- rework hash table operations: add proper timeout handling and clear bits when
  appropriate

Bartosz Golaszewski (14):
  dt-bindings: arm: add a binding document for MediaTek PERICFG
    controller
  dt-bindings: net: add a binding document for MediaTek Ethernet MAC
  net: ethernet: mediatek: rename Kconfig prompt
  net: ethernet: mediatek: remove unnecessary spaces from Makefile
  net: core: provide priv_to_netdev()
  net: move devres helpers into a separate source file
  net: devres: define a separate devres structure for
    devm_alloc_etherdev()
  net: devres: provide devm_register_netdev()
  net: ethernet: mtk-eth-mac: new driver
  ARM64: dts: mediatek: add pericfg syscon to mt8516.dtsi
  ARM64: dts: mediatek: add the ethernet node to mt8516.dtsi
  ARM64: dts: mediatek: add an alias for ethernet0 for pumpkin boards
  ARM64: dts: mediatek: add ethernet pins for pumpkin boards
  ARM64: dts: mediatek: enable ethernet on pumpkin boards

 .../arm/mediatek/mediatek,pericfg.yaml        |   34 +
 .../bindings/net/mediatek,eth-mac.yaml        |   80 +
 arch/arm64/boot/dts/mediatek/mt8516.dtsi      |   17 +
 .../boot/dts/mediatek/pumpkin-common.dtsi     |   34 +
 drivers/net/ethernet/mediatek/Kconfig         |    8 +-
 drivers/net/ethernet/mediatek/Makefile        |    3 +-
 drivers/net/ethernet/mediatek/mtk_eth_mac.c   | 1561 +++++++++++++++++
 include/linux/netdevice.h                     |   14 +
 net/Makefile                                  |    2 +-
 net/devres.c                                  |   95 +
 net/ethernet/eth.c                            |   28 -
 11 files changed, 1845 insertions(+), 31 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
 create mode 100644 Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml
 create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_mac.c
 create mode 100644 net/devres.c

-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 01/14] dt-bindings: arm: add a binding document for MediaTek PERICFG controller

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds a binding document for the PERICFG controller present on
MediaTek SoCs. For now the only variant supported is 'mt8516-pericfg'.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../arm/mediatek/mediatek,pericfg.yaml        | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
new file mode 100644
index 000000000000..74b2a6173ffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Peripheral Configuration Controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - mediatek,pericfg
+        - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pericfg: pericfg@10003050 {
+        compatible = "mediatek,mt8516-pericfg", "syscon";
+        reg = <0 0x10003050 0 0x1000>;
+    };
-- 
2.25.0

[PATCH v2 01/14] dt-bindings: arm: add a binding document for MediaTek PERICFG controller

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds a binding document for the PERICFG controller present on
MediaTek SoCs. For now the only variant supported is 'mt8516-pericfg'.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../arm/mediatek/mediatek,pericfg.yaml        | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
new file mode 100644
index 000000000000..74b2a6173ffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Peripheral Configuration Controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - mediatek,pericfg
+        - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pericfg: pericfg@10003050 {
+        compatible = "mediatek,mt8516-pericfg", "syscon";
+        reg = <0 0x10003050 0 0x1000>;
+    };
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 01/14] dt-bindings: arm: add a binding document for MediaTek PERICFG controller

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds a binding document for the PERICFG controller present on
MediaTek SoCs. For now the only variant supported is 'mt8516-pericfg'.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../arm/mediatek/mediatek,pericfg.yaml        | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
new file mode 100644
index 000000000000..74b2a6173ffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Peripheral Configuration Controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - mediatek,pericfg
+        - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pericfg: pericfg@10003050 {
+        compatible = "mediatek,mt8516-pericfg", "syscon";
+        reg = <0 0x10003050 0 0x1000>;
+    };
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 02/14] dt-bindings: net: add a binding document for MediaTek Ethernet MAC

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds yaml DT bindings for the MediaTek Ethernet MAC present on the
mt8* family of SoCs.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../bindings/net/mediatek,eth-mac.yaml        | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml

diff --git a/Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml b/Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml
new file mode 100644
index 000000000000..7682fe9d8109
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek,eth-mac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Ethernet MAC Controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description:
+  This Ethernet MAC is used on the MT8* family of SoCs from MediaTek.
+  It's compliant with 802.3 standards and supports half- and full-duplex
+  modes with flow-control as well as CRC offloading and VLAN tags.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8516-eth
+      - mediatek,mt8518-eth
+      - mediatek,mt8175-eth
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    additionalItems: false
+    items:
+      - const: core
+      - const: reg
+      - const: trans
+
+  mediatek,pericfg:
+    $ref: /schemas/types.yaml#definitions/phandle
+    description:
+      Phandle to the device containing the PERICFG register range.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,pericfg
+  - phy-handle
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8516-clk.h>
+
+    ethernet: ethernet@11180000 {
+        compatible = "mediatek,mt8516-eth";
+        reg = <0 0x11180000 0 0x1000>;
+        mediatek,pericfg = <&pericfg>;
+        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_RG_ETH>,
+                 <&topckgen CLK_TOP_66M_ETH>,
+                 <&topckgen CLK_TOP_133M_ETH>;
+        clock-names = "core", "reg", "trans";
+        phy-handle = <&eth_phy>;
+        phy-mode = "rmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
-- 
2.25.0

[PATCH v2 02/14] dt-bindings: net: add a binding document for MediaTek Ethernet MAC

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds yaml DT bindings for the MediaTek Ethernet MAC present on the
mt8* family of SoCs.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../bindings/net/mediatek,eth-mac.yaml        | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml

diff --git a/Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml b/Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml
new file mode 100644
index 000000000000..7682fe9d8109
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek,eth-mac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Ethernet MAC Controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description:
+  This Ethernet MAC is used on the MT8* family of SoCs from MediaTek.
+  It's compliant with 802.3 standards and supports half- and full-duplex
+  modes with flow-control as well as CRC offloading and VLAN tags.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8516-eth
+      - mediatek,mt8518-eth
+      - mediatek,mt8175-eth
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    additionalItems: false
+    items:
+      - const: core
+      - const: reg
+      - const: trans
+
+  mediatek,pericfg:
+    $ref: /schemas/types.yaml#definitions/phandle
+    description:
+      Phandle to the device containing the PERICFG register range.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,pericfg
+  - phy-handle
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8516-clk.h>
+
+    ethernet: ethernet@11180000 {
+        compatible = "mediatek,mt8516-eth";
+        reg = <0 0x11180000 0 0x1000>;
+        mediatek,pericfg = <&pericfg>;
+        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_RG_ETH>,
+                 <&topckgen CLK_TOP_66M_ETH>,
+                 <&topckgen CLK_TOP_133M_ETH>;
+        clock-names = "core", "reg", "trans";
+        phy-handle = <&eth_phy>;
+        phy-mode = "rmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 02/14] dt-bindings: net: add a binding document for MediaTek Ethernet MAC

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds yaml DT bindings for the MediaTek Ethernet MAC present on the
mt8* family of SoCs.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../bindings/net/mediatek,eth-mac.yaml        | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml

diff --git a/Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml b/Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml
new file mode 100644
index 000000000000..7682fe9d8109
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,eth-mac.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek,eth-mac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Ethernet MAC Controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description:
+  This Ethernet MAC is used on the MT8* family of SoCs from MediaTek.
+  It's compliant with 802.3 standards and supports half- and full-duplex
+  modes with flow-control as well as CRC offloading and VLAN tags.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8516-eth
+      - mediatek,mt8518-eth
+      - mediatek,mt8175-eth
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    additionalItems: false
+    items:
+      - const: core
+      - const: reg
+      - const: trans
+
+  mediatek,pericfg:
+    $ref: /schemas/types.yaml#definitions/phandle
+    description:
+      Phandle to the device containing the PERICFG register range.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,pericfg
+  - phy-handle
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8516-clk.h>
+
+    ethernet: ethernet@11180000 {
+        compatible = "mediatek,mt8516-eth";
+        reg = <0 0x11180000 0 0x1000>;
+        mediatek,pericfg = <&pericfg>;
+        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_RG_ETH>,
+                 <&topckgen CLK_TOP_66M_ETH>,
+                 <&topckgen CLK_TOP_133M_ETH>;
+        clock-names = "core", "reg", "trans";
+        phy-handle = <&eth_phy>;
+        phy-mode = "rmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 03/14] net: ethernet: mediatek: rename Kconfig prompt

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We'll soon by adding a second MediaTek Ethernet driver so modify the
Kconfig prompt.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/mediatek/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
index 4968352ba188..5079b8090f16 100644
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config NET_VENDOR_MEDIATEK
-	bool "MediaTek ethernet driver"
+	bool "MediaTek devices"
 	depends on ARCH_MEDIATEK || SOC_MT7621 || SOC_MT7620
 	---help---
 	  If you have a Mediatek SoC with ethernet, say Y.
-- 
2.25.0

[PATCH v2 03/14] net: ethernet: mediatek: rename Kconfig prompt

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We'll soon by adding a second MediaTek Ethernet driver so modify the
Kconfig prompt.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/mediatek/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
index 4968352ba188..5079b8090f16 100644
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config NET_VENDOR_MEDIATEK
-	bool "MediaTek ethernet driver"
+	bool "MediaTek devices"
 	depends on ARCH_MEDIATEK || SOC_MT7621 || SOC_MT7620
 	---help---
 	  If you have a Mediatek SoC with ethernet, say Y.
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 03/14] net: ethernet: mediatek: rename Kconfig prompt

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We'll soon by adding a second MediaTek Ethernet driver so modify the
Kconfig prompt.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/mediatek/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
index 4968352ba188..5079b8090f16 100644
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config NET_VENDOR_MEDIATEK
-	bool "MediaTek ethernet driver"
+	bool "MediaTek devices"
 	depends on ARCH_MEDIATEK || SOC_MT7621 || SOC_MT7620
 	---help---
 	  If you have a Mediatek SoC with ethernet, say Y.
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 04/14] net: ethernet: mediatek: remove unnecessary spaces from Makefile

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The Makefile formatting in the kernel tree usually doesn't use tabs,
so remove them before we add a second driver.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/mediatek/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile
index 2d8362f9341b..3362fb7ef859 100644
--- a/drivers/net/ethernet/mediatek/Makefile
+++ b/drivers/net/ethernet/mediatek/Makefile
@@ -3,5 +3,5 @@
 # Makefile for the Mediatek SoCs built-in ethernet macs
 #
 
-obj-$(CONFIG_NET_MEDIATEK_SOC)                 += mtk_eth.o
+obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
 mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o
-- 
2.25.0

[PATCH v2 04/14] net: ethernet: mediatek: remove unnecessary spaces from Makefile

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The Makefile formatting in the kernel tree usually doesn't use tabs,
so remove them before we add a second driver.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/mediatek/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile
index 2d8362f9341b..3362fb7ef859 100644
--- a/drivers/net/ethernet/mediatek/Makefile
+++ b/drivers/net/ethernet/mediatek/Makefile
@@ -3,5 +3,5 @@
 # Makefile for the Mediatek SoCs built-in ethernet macs
 #
 
-obj-$(CONFIG_NET_MEDIATEK_SOC)                 += mtk_eth.o
+obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
 mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 04/14] net: ethernet: mediatek: remove unnecessary spaces from Makefile

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The Makefile formatting in the kernel tree usually doesn't use tabs,
so remove them before we add a second driver.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/mediatek/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile
index 2d8362f9341b..3362fb7ef859 100644
--- a/drivers/net/ethernet/mediatek/Makefile
+++ b/drivers/net/ethernet/mediatek/Makefile
@@ -3,5 +3,5 @@
 # Makefile for the Mediatek SoCs built-in ethernet macs
 #
 
-obj-$(CONFIG_NET_MEDIATEK_SOC)                 += mtk_eth.o
+obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
 mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 05/14] net: core: provide priv_to_netdev()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Appropriate amount of extra memory for private data is allocated at
the end of struct net_device. We have a helper - netdev_priv() - that
returns its address but we don't have the reverse: a function which
given the address of the private data, returns the address of struct
net_device.

This has caused many drivers to store the pointer to net_device in
the private data structure, which basically means storing the pointer
to a structure in this very structure.

This patch proposes to add priv_to_netdev() - a helper which converts
the address of the private data to the address of the associated
net_device.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 include/linux/netdevice.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 130a668049ab..933c6808a87f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2249,6 +2249,18 @@ static inline void *netdev_priv(const struct net_device *dev)
 	return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
 }
 
+/**
+ *	priv_to_netdev - get the net_device from private data
+ *	@priv: net_device private data
+ *
+ * Get the address of network device associated with this private data.
+ */
+static inline struct net_device *priv_to_netdev(void *priv)
+{
+	priv = (char *)priv - ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
+	return (struct net_device *)priv;
+}
+
 /* Set the sysfs physical device reference for the network logical device
  * if set prior to registration will cause a symlink during initialization.
  */
-- 
2.25.0

[PATCH v2 05/14] net: core: provide priv_to_netdev()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Appropriate amount of extra memory for private data is allocated at
the end of struct net_device. We have a helper - netdev_priv() - that
returns its address but we don't have the reverse: a function which
given the address of the private data, returns the address of struct
net_device.

This has caused many drivers to store the pointer to net_device in
the private data structure, which basically means storing the pointer
to a structure in this very structure.

This patch proposes to add priv_to_netdev() - a helper which converts
the address of the private data to the address of the associated
net_device.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 include/linux/netdevice.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 130a668049ab..933c6808a87f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2249,6 +2249,18 @@ static inline void *netdev_priv(const struct net_device *dev)
 	return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
 }
 
+/**
+ *	priv_to_netdev - get the net_device from private data
+ *	@priv: net_device private data
+ *
+ * Get the address of network device associated with this private data.
+ */
+static inline struct net_device *priv_to_netdev(void *priv)
+{
+	priv = (char *)priv - ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
+	return (struct net_device *)priv;
+}
+
 /* Set the sysfs physical device reference for the network logical device
  * if set prior to registration will cause a symlink during initialization.
  */
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 05/14] net: core: provide priv_to_netdev()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Appropriate amount of extra memory for private data is allocated at
the end of struct net_device. We have a helper - netdev_priv() - that
returns its address but we don't have the reverse: a function which
given the address of the private data, returns the address of struct
net_device.

This has caused many drivers to store the pointer to net_device in
the private data structure, which basically means storing the pointer
to a structure in this very structure.

This patch proposes to add priv_to_netdev() - a helper which converts
the address of the private data to the address of the associated
net_device.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 include/linux/netdevice.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 130a668049ab..933c6808a87f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2249,6 +2249,18 @@ static inline void *netdev_priv(const struct net_device *dev)
 	return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
 }
 
+/**
+ *	priv_to_netdev - get the net_device from private data
+ *	@priv: net_device private data
+ *
+ * Get the address of network device associated with this private data.
+ */
+static inline struct net_device *priv_to_netdev(void *priv)
+{
+	priv = (char *)priv - ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
+	return (struct net_device *)priv;
+}
+
 /* Set the sysfs physical device reference for the network logical device
  * if set prior to registration will cause a symlink during initialization.
  */
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 06/14] net: move devres helpers into a separate source file

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

There's currently only a single devres helper in net/ - devm variant
of alloc_etherdev. Let's move it to net/devres.c with the intention of
assing a second one: devm_register_netdev(). This new routine will need
to know the address of the release function of devm_alloc_etherdev() so
that it can verify (using devres_find()) that the struct net_device
that's being passed to it is also resource managed.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 net/Makefile       |  2 +-
 net/devres.c       | 36 ++++++++++++++++++++++++++++++++++++
 net/ethernet/eth.c | 28 ----------------------------
 3 files changed, 37 insertions(+), 29 deletions(-)
 create mode 100644 net/devres.c

diff --git a/net/Makefile b/net/Makefile
index 07ea48160874..5744bf1997fd 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -6,7 +6,7 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-obj-$(CONFIG_NET)		:= socket.o core/
+obj-$(CONFIG_NET)		:= devres.o socket.o core/
 
 tmp-$(CONFIG_COMPAT) 		:= compat.o
 obj-$(CONFIG_NET)		+= $(tmp-y)
diff --git a/net/devres.c b/net/devres.c
new file mode 100644
index 000000000000..c1465d9f9019
--- /dev/null
+++ b/net/devres.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains all networking devres helpers.
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/netdevice.h>
+
+static void devm_free_netdev(struct device *dev, void *res)
+{
+	free_netdev(*(struct net_device **)res);
+}
+
+struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
+					   unsigned int txqs, unsigned int rxqs)
+{
+	struct net_device **dr;
+	struct net_device *netdev;
+
+	dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL);
+	if (!dr)
+		return NULL;
+
+	netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
+	if (!netdev) {
+		devres_free(dr);
+		return NULL;
+	}
+
+	*dr = netdev;
+	devres_add(dev, dr);
+
+	return netdev;
+}
+EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index c8b903302ff2..dac65180c4ef 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -400,34 +400,6 @@ struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
 }
 EXPORT_SYMBOL(alloc_etherdev_mqs);
 
-static void devm_free_netdev(struct device *dev, void *res)
-{
-	free_netdev(*(struct net_device **)res);
-}
-
-struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
-					   unsigned int txqs, unsigned int rxqs)
-{
-	struct net_device **dr;
-	struct net_device *netdev;
-
-	dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL);
-	if (!dr)
-		return NULL;
-
-	netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
-	if (!netdev) {
-		devres_free(dr);
-		return NULL;
-	}
-
-	*dr = netdev;
-	devres_add(dev, dr);
-
-	return netdev;
-}
-EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
-
 ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len)
 {
 	return scnprintf(buf, PAGE_SIZE, "%*phC\n", len, addr);
-- 
2.25.0

[PATCH v2 06/14] net: move devres helpers into a separate source file

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

There's currently only a single devres helper in net/ - devm variant
of alloc_etherdev. Let's move it to net/devres.c with the intention of
assing a second one: devm_register_netdev(). This new routine will need
to know the address of the release function of devm_alloc_etherdev() so
that it can verify (using devres_find()) that the struct net_device
that's being passed to it is also resource managed.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 net/Makefile       |  2 +-
 net/devres.c       | 36 ++++++++++++++++++++++++++++++++++++
 net/ethernet/eth.c | 28 ----------------------------
 3 files changed, 37 insertions(+), 29 deletions(-)
 create mode 100644 net/devres.c

diff --git a/net/Makefile b/net/Makefile
index 07ea48160874..5744bf1997fd 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -6,7 +6,7 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-obj-$(CONFIG_NET)		:= socket.o core/
+obj-$(CONFIG_NET)		:= devres.o socket.o core/
 
 tmp-$(CONFIG_COMPAT) 		:= compat.o
 obj-$(CONFIG_NET)		+= $(tmp-y)
diff --git a/net/devres.c b/net/devres.c
new file mode 100644
index 000000000000..c1465d9f9019
--- /dev/null
+++ b/net/devres.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains all networking devres helpers.
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/netdevice.h>
+
+static void devm_free_netdev(struct device *dev, void *res)
+{
+	free_netdev(*(struct net_device **)res);
+}
+
+struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
+					   unsigned int txqs, unsigned int rxqs)
+{
+	struct net_device **dr;
+	struct net_device *netdev;
+
+	dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL);
+	if (!dr)
+		return NULL;
+
+	netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
+	if (!netdev) {
+		devres_free(dr);
+		return NULL;
+	}
+
+	*dr = netdev;
+	devres_add(dev, dr);
+
+	return netdev;
+}
+EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index c8b903302ff2..dac65180c4ef 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -400,34 +400,6 @@ struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
 }
 EXPORT_SYMBOL(alloc_etherdev_mqs);
 
-static void devm_free_netdev(struct device *dev, void *res)
-{
-	free_netdev(*(struct net_device **)res);
-}
-
-struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
-					   unsigned int txqs, unsigned int rxqs)
-{
-	struct net_device **dr;
-	struct net_device *netdev;
-
-	dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL);
-	if (!dr)
-		return NULL;
-
-	netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
-	if (!netdev) {
-		devres_free(dr);
-		return NULL;
-	}
-
-	*dr = netdev;
-	devres_add(dev, dr);
-
-	return netdev;
-}
-EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
-
 ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len)
 {
 	return scnprintf(buf, PAGE_SIZE, "%*phC\n", len, addr);
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 06/14] net: move devres helpers into a separate source file

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

There's currently only a single devres helper in net/ - devm variant
of alloc_etherdev. Let's move it to net/devres.c with the intention of
assing a second one: devm_register_netdev(). This new routine will need
to know the address of the release function of devm_alloc_etherdev() so
that it can verify (using devres_find()) that the struct net_device
that's being passed to it is also resource managed.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 net/Makefile       |  2 +-
 net/devres.c       | 36 ++++++++++++++++++++++++++++++++++++
 net/ethernet/eth.c | 28 ----------------------------
 3 files changed, 37 insertions(+), 29 deletions(-)
 create mode 100644 net/devres.c

diff --git a/net/Makefile b/net/Makefile
index 07ea48160874..5744bf1997fd 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -6,7 +6,7 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-obj-$(CONFIG_NET)		:= socket.o core/
+obj-$(CONFIG_NET)		:= devres.o socket.o core/
 
 tmp-$(CONFIG_COMPAT) 		:= compat.o
 obj-$(CONFIG_NET)		+= $(tmp-y)
diff --git a/net/devres.c b/net/devres.c
new file mode 100644
index 000000000000..c1465d9f9019
--- /dev/null
+++ b/net/devres.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains all networking devres helpers.
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/netdevice.h>
+
+static void devm_free_netdev(struct device *dev, void *res)
+{
+	free_netdev(*(struct net_device **)res);
+}
+
+struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
+					   unsigned int txqs, unsigned int rxqs)
+{
+	struct net_device **dr;
+	struct net_device *netdev;
+
+	dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL);
+	if (!dr)
+		return NULL;
+
+	netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
+	if (!netdev) {
+		devres_free(dr);
+		return NULL;
+	}
+
+	*dr = netdev;
+	devres_add(dev, dr);
+
+	return netdev;
+}
+EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index c8b903302ff2..dac65180c4ef 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -400,34 +400,6 @@ struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
 }
 EXPORT_SYMBOL(alloc_etherdev_mqs);
 
-static void devm_free_netdev(struct device *dev, void *res)
-{
-	free_netdev(*(struct net_device **)res);
-}
-
-struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
-					   unsigned int txqs, unsigned int rxqs)
-{
-	struct net_device **dr;
-	struct net_device *netdev;
-
-	dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL);
-	if (!dr)
-		return NULL;
-
-	netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
-	if (!netdev) {
-		devres_free(dr);
-		return NULL;
-	}
-
-	*dr = netdev;
-	devres_add(dev, dr);
-
-	return netdev;
-}
-EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
-
 ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len)
 {
 	return scnprintf(buf, PAGE_SIZE, "%*phC\n", len, addr);
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 07/14] net: devres: define a separate devres structure for devm_alloc_etherdev()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Not using a proxy structure to store struct net_device doesn't save
anything in terms of compiled code size or memory usage but significantly
decreases the readability of the code with all the pointer casting.

Define struct net_device_devres and use it in devm_alloc_etherdev_mqs().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 net/devres.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/net/devres.c b/net/devres.c
index c1465d9f9019..b97b0c5a8216 100644
--- a/net/devres.c
+++ b/net/devres.c
@@ -7,30 +7,34 @@
 #include <linux/etherdevice.h>
 #include <linux/netdevice.h>
 
-static void devm_free_netdev(struct device *dev, void *res)
+struct net_device_devres {
+	struct net_device *ndev;
+};
+
+static void devm_free_netdev(struct device *dev, void *this)
 {
-	free_netdev(*(struct net_device **)res);
+	struct net_device_devres *res = this;
+
+	free_netdev(res->ndev);
 }
 
 struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
 					   unsigned int txqs, unsigned int rxqs)
 {
-	struct net_device **dr;
-	struct net_device *netdev;
+	struct net_device_devres *dr;
 
 	dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL);
 	if (!dr)
 		return NULL;
 
-	netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
-	if (!netdev) {
+	dr->ndev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
+	if (!dr->ndev) {
 		devres_free(dr);
 		return NULL;
 	}
 
-	*dr = netdev;
 	devres_add(dev, dr);
 
-	return netdev;
+	return dr->ndev;
 }
 EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
-- 
2.25.0

[PATCH v2 07/14] net: devres: define a separate devres structure for devm_alloc_etherdev()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Not using a proxy structure to store struct net_device doesn't save
anything in terms of compiled code size or memory usage but significantly
decreases the readability of the code with all the pointer casting.

Define struct net_device_devres and use it in devm_alloc_etherdev_mqs().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 net/devres.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/net/devres.c b/net/devres.c
index c1465d9f9019..b97b0c5a8216 100644
--- a/net/devres.c
+++ b/net/devres.c
@@ -7,30 +7,34 @@
 #include <linux/etherdevice.h>
 #include <linux/netdevice.h>
 
-static void devm_free_netdev(struct device *dev, void *res)
+struct net_device_devres {
+	struct net_device *ndev;
+};
+
+static void devm_free_netdev(struct device *dev, void *this)
 {
-	free_netdev(*(struct net_device **)res);
+	struct net_device_devres *res = this;
+
+	free_netdev(res->ndev);
 }
 
 struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
 					   unsigned int txqs, unsigned int rxqs)
 {
-	struct net_device **dr;
-	struct net_device *netdev;
+	struct net_device_devres *dr;
 
 	dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL);
 	if (!dr)
 		return NULL;
 
-	netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
-	if (!netdev) {
+	dr->ndev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
+	if (!dr->ndev) {
 		devres_free(dr);
 		return NULL;
 	}
 
-	*dr = netdev;
 	devres_add(dev, dr);
 
-	return netdev;
+	return dr->ndev;
 }
 EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 07/14] net: devres: define a separate devres structure for devm_alloc_etherdev()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Not using a proxy structure to store struct net_device doesn't save
anything in terms of compiled code size or memory usage but significantly
decreases the readability of the code with all the pointer casting.

Define struct net_device_devres and use it in devm_alloc_etherdev_mqs().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 net/devres.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/net/devres.c b/net/devres.c
index c1465d9f9019..b97b0c5a8216 100644
--- a/net/devres.c
+++ b/net/devres.c
@@ -7,30 +7,34 @@
 #include <linux/etherdevice.h>
 #include <linux/netdevice.h>
 
-static void devm_free_netdev(struct device *dev, void *res)
+struct net_device_devres {
+	struct net_device *ndev;
+};
+
+static void devm_free_netdev(struct device *dev, void *this)
 {
-	free_netdev(*(struct net_device **)res);
+	struct net_device_devres *res = this;
+
+	free_netdev(res->ndev);
 }
 
 struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
 					   unsigned int txqs, unsigned int rxqs)
 {
-	struct net_device **dr;
-	struct net_device *netdev;
+	struct net_device_devres *dr;
 
 	dr = devres_alloc(devm_free_netdev, sizeof(*dr), GFP_KERNEL);
 	if (!dr)
 		return NULL;
 
-	netdev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
-	if (!netdev) {
+	dr->ndev = alloc_etherdev_mqs(sizeof_priv, txqs, rxqs);
+	if (!dr->ndev) {
 		devres_free(dr);
 		return NULL;
 	}
 
-	*dr = netdev;
 	devres_add(dev, dr);
 
-	return netdev;
+	return dr->ndev;
 }
 EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 08/14] net: devres: provide devm_register_netdev()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Provide devm_register_netdev() - a device resource managed variant
of register_netdev(). This new helper will only work for net_device
structs that are also already managed by devres.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 include/linux/netdevice.h |  2 ++
 net/devres.c              | 55 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 933c6808a87f..d3d1b9251ae5 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -4220,6 +4220,8 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
 int register_netdev(struct net_device *dev);
 void unregister_netdev(struct net_device *dev);
 
+int devm_register_netdev(struct device *dev, struct net_device *ndev);
+
 /* General hardware address lists handling functions */
 int __hw_addr_sync(struct netdev_hw_addr_list *to_list,
 		   struct netdev_hw_addr_list *from_list, int addr_len);
diff --git a/net/devres.c b/net/devres.c
index b97b0c5a8216..57a6a88d11f6 100644
--- a/net/devres.c
+++ b/net/devres.c
@@ -38,3 +38,58 @@ struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
 	return dr->ndev;
 }
 EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
+
+static void devm_netdev_release(struct device *dev, void *this)
+{
+	struct net_device_devres *res = this;
+
+	unregister_netdev(res->ndev);
+}
+
+static int netdev_devres_match(struct device *dev, void *this, void *match_data)
+{
+	struct net_device_devres *res = this;
+	struct net_device *ndev = match_data;
+
+	return ndev == res->ndev;
+}
+
+/**
+ *	devm_register_netdev - resource managed variant of register_netdev()
+ *	@dev: managing device for this netdev - usually the parent device
+ *	@ndev: device to register
+ *
+ *	This is a devres variant of register_netdev() for which the unregister
+ *	function will be call automatically when the managing device is
+ *	detached. Note: the net_device used must also be resource managed by
+ *	the same struct device.
+ */
+int devm_register_netdev(struct device *dev, struct net_device *ndev)
+{
+	struct net_device_devres *dr;
+	int ret;
+
+	/* struct net_device must itself be managed. For now a managed netdev
+	 * can only be allocated by devm_alloc_etherdev_mqs() so the check is
+	 * straightforward.
+	 */
+	if (WARN_ON(!devres_find(dev, devm_free_netdev,
+				 netdev_devres_match, ndev)))
+		return -EINVAL;
+
+	dr = devres_alloc(devm_netdev_release, sizeof(*dr), GFP_KERNEL);
+	if (!dr)
+		return -ENOMEM;
+
+	ret = register_netdev(ndev);
+	if (ret) {
+		devres_free(dr);
+		return ret;
+	}
+
+	dr->ndev = ndev;
+	devres_add(ndev->dev.parent, dr);
+
+	return 0;
+}
+EXPORT_SYMBOL(devm_register_netdev);
-- 
2.25.0

[PATCH v2 08/14] net: devres: provide devm_register_netdev()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Provide devm_register_netdev() - a device resource managed variant
of register_netdev(). This new helper will only work for net_device
structs that are also already managed by devres.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 include/linux/netdevice.h |  2 ++
 net/devres.c              | 55 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 933c6808a87f..d3d1b9251ae5 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -4220,6 +4220,8 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
 int register_netdev(struct net_device *dev);
 void unregister_netdev(struct net_device *dev);
 
+int devm_register_netdev(struct device *dev, struct net_device *ndev);
+
 /* General hardware address lists handling functions */
 int __hw_addr_sync(struct netdev_hw_addr_list *to_list,
 		   struct netdev_hw_addr_list *from_list, int addr_len);
diff --git a/net/devres.c b/net/devres.c
index b97b0c5a8216..57a6a88d11f6 100644
--- a/net/devres.c
+++ b/net/devres.c
@@ -38,3 +38,58 @@ struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
 	return dr->ndev;
 }
 EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
+
+static void devm_netdev_release(struct device *dev, void *this)
+{
+	struct net_device_devres *res = this;
+
+	unregister_netdev(res->ndev);
+}
+
+static int netdev_devres_match(struct device *dev, void *this, void *match_data)
+{
+	struct net_device_devres *res = this;
+	struct net_device *ndev = match_data;
+
+	return ndev == res->ndev;
+}
+
+/**
+ *	devm_register_netdev - resource managed variant of register_netdev()
+ *	@dev: managing device for this netdev - usually the parent device
+ *	@ndev: device to register
+ *
+ *	This is a devres variant of register_netdev() for which the unregister
+ *	function will be call automatically when the managing device is
+ *	detached. Note: the net_device used must also be resource managed by
+ *	the same struct device.
+ */
+int devm_register_netdev(struct device *dev, struct net_device *ndev)
+{
+	struct net_device_devres *dr;
+	int ret;
+
+	/* struct net_device must itself be managed. For now a managed netdev
+	 * can only be allocated by devm_alloc_etherdev_mqs() so the check is
+	 * straightforward.
+	 */
+	if (WARN_ON(!devres_find(dev, devm_free_netdev,
+				 netdev_devres_match, ndev)))
+		return -EINVAL;
+
+	dr = devres_alloc(devm_netdev_release, sizeof(*dr), GFP_KERNEL);
+	if (!dr)
+		return -ENOMEM;
+
+	ret = register_netdev(ndev);
+	if (ret) {
+		devres_free(dr);
+		return ret;
+	}
+
+	dr->ndev = ndev;
+	devres_add(ndev->dev.parent, dr);
+
+	return 0;
+}
+EXPORT_SYMBOL(devm_register_netdev);
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 08/14] net: devres: provide devm_register_netdev()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Provide devm_register_netdev() - a device resource managed variant
of register_netdev(). This new helper will only work for net_device
structs that are also already managed by devres.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 include/linux/netdevice.h |  2 ++
 net/devres.c              | 55 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 933c6808a87f..d3d1b9251ae5 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -4220,6 +4220,8 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
 int register_netdev(struct net_device *dev);
 void unregister_netdev(struct net_device *dev);
 
+int devm_register_netdev(struct device *dev, struct net_device *ndev);
+
 /* General hardware address lists handling functions */
 int __hw_addr_sync(struct netdev_hw_addr_list *to_list,
 		   struct netdev_hw_addr_list *from_list, int addr_len);
diff --git a/net/devres.c b/net/devres.c
index b97b0c5a8216..57a6a88d11f6 100644
--- a/net/devres.c
+++ b/net/devres.c
@@ -38,3 +38,58 @@ struct net_device *devm_alloc_etherdev_mqs(struct device *dev, int sizeof_priv,
 	return dr->ndev;
 }
 EXPORT_SYMBOL(devm_alloc_etherdev_mqs);
+
+static void devm_netdev_release(struct device *dev, void *this)
+{
+	struct net_device_devres *res = this;
+
+	unregister_netdev(res->ndev);
+}
+
+static int netdev_devres_match(struct device *dev, void *this, void *match_data)
+{
+	struct net_device_devres *res = this;
+	struct net_device *ndev = match_data;
+
+	return ndev == res->ndev;
+}
+
+/**
+ *	devm_register_netdev - resource managed variant of register_netdev()
+ *	@dev: managing device for this netdev - usually the parent device
+ *	@ndev: device to register
+ *
+ *	This is a devres variant of register_netdev() for which the unregister
+ *	function will be call automatically when the managing device is
+ *	detached. Note: the net_device used must also be resource managed by
+ *	the same struct device.
+ */
+int devm_register_netdev(struct device *dev, struct net_device *ndev)
+{
+	struct net_device_devres *dr;
+	int ret;
+
+	/* struct net_device must itself be managed. For now a managed netdev
+	 * can only be allocated by devm_alloc_etherdev_mqs() so the check is
+	 * straightforward.
+	 */
+	if (WARN_ON(!devres_find(dev, devm_free_netdev,
+				 netdev_devres_match, ndev)))
+		return -EINVAL;
+
+	dr = devres_alloc(devm_netdev_release, sizeof(*dr), GFP_KERNEL);
+	if (!dr)
+		return -ENOMEM;
+
+	ret = register_netdev(ndev);
+	if (ret) {
+		devres_free(dr);
+		return ret;
+	}
+
+	dr->ndev = ndev;
+	devres_add(ndev->dev.parent, dr);
+
+	return 0;
+}
+EXPORT_SYMBOL(devm_register_netdev);
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 09/14] net: ethernet: mtk-eth-mac: new driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds the driver for the MediaTek Ethernet MAC used on the MT8* SoC
family. For now we only support full-duplex.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/mediatek/Kconfig       |    6 +
 drivers/net/ethernet/mediatek/Makefile      |    1 +
 drivers/net/ethernet/mediatek/mtk_eth_mac.c | 1561 +++++++++++++++++++
 3 files changed, 1568 insertions(+)
 create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_mac.c

diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
index 5079b8090f16..5c3793076765 100644
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -14,4 +14,10 @@ config NET_MEDIATEK_SOC
 	  This driver supports the gigabit ethernet MACs in the
 	  MediaTek SoC family.
 
+config NET_MEDIATEK_MAC
+	tristate "MediaTek Ethernet MAC support"
+	select PHYLIB
+	help
+	  This driver supports the ethernet IP on MediaTek MT85** SoCs.
+
 endif #NET_VENDOR_MEDIATEK
diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile
index 3362fb7ef859..f7f5638943a0 100644
--- a/drivers/net/ethernet/mediatek/Makefile
+++ b/drivers/net/ethernet/mediatek/Makefile
@@ -5,3 +5,4 @@
 
 obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
 mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o
+obj-$(CONFIG_NET_MEDIATEK_MAC) += mtk_eth_mac.o
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_mac.c b/drivers/net/ethernet/mediatek/mtk_eth_mac.c
new file mode 100644
index 000000000000..fffaa452f55d
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/mtk_eth_mac.c
@@ -0,0 +1,1561 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 MediaTek Corporation
+ * Copyright (c) 2020 BayLibre SAS
+ *
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+
+#define MTK_MAC_DRVNAME				"mtk_eth_mac"
+
+#define MTK_MAC_WAIT_TIMEOUT			300
+#define MTK_MAC_MAX_FRAME_SIZE			1514
+#define MTK_MAC_SKB_ALIGNMENT			16
+#define MTK_MAC_NAPI_WEIGHT			64
+#define MTK_MAC_HASHTABLE_MC_LIMIT		256
+#define MTK_MAC_HASHTABLE_SIZE_MAX		512
+
+/* This is defined to 0 on arm64 in arch/arm64/include/asm/processor.h but
+ * this IP doesn't work without this alignment being equal to 2.
+ */
+#ifdef NET_IP_ALIGN
+#undef NET_IP_ALIGN
+#endif
+#define NET_IP_ALIGN				2
+
+static const char *const mtk_mac_clk_names[] = { "core", "reg", "trans" };
+#define MTK_MAC_NCLKS ARRAY_SIZE(mtk_mac_clk_names)
+
+/* PHY Control Register 0 */
+#define MTK_MAC_REG_PHY_CTRL0			0x0000
+#define MTK_MAC_BIT_PHY_CTRL0_WTCMD		BIT(13)
+#define MTK_MAC_BIT_PHY_CTRL0_RDCMD		BIT(14)
+#define MTK_MAC_BIT_PHY_CTRL0_RWOK		BIT(15)
+#define MTK_MAC_MSK_PHY_CTRL0_PREG		GENMASK(12, 8)
+#define MTK_MAC_OFF_PHY_CTRL0_PREG		8
+#define MTK_MAC_MSK_PHY_CTRL0_RWDATA		GENMASK(31, 16)
+#define MTK_MAC_OFF_PHY_CTRL0_RWDATA		16
+
+/* PHY Control Register 1 */
+#define MTK_MAC_REG_PHY_CTRL1			0x0004
+#define MTK_MAC_BIT_PHY_CTRL1_LINK_ST		BIT(0)
+#define MTK_MAC_BIT_PHY_CTRL1_AN_EN		BIT(8)
+#define MTK_MAC_OFF_PHY_CTRL1_FORCE_SPD		9
+#define MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_10M	0x00
+#define MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_100M	0x01
+#define MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_1000M	0x02
+#define MTK_MAC_BIT_PHY_CTRL1_FORCE_DPX		BIT(11)
+#define MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_RX	BIT(12)
+#define MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_TX	BIT(13)
+
+/* MAC Configuration Register */
+#define MTK_MAC_REG_MAC_CFG			0x0008
+#define MTK_MAC_OFF_MAC_CFG_IPG			10
+#define MTK_MAC_VAL_MAC_CFG_IPG_96BIT		GENMASK(4, 0)
+#define MTK_MAC_BIT_MAC_CFG_MAXLEN_1522		BIT(16)
+#define MTK_MAC_BIT_MAC_CFG_AUTO_PAD		BIT(19)
+#define MTK_MAC_BIT_MAC_CFG_CRC_STRIP		BIT(20)
+#define MTK_MAC_BIT_MAC_CFG_VLAN_STRIP		BIT(22)
+#define MTK_MAC_BIT_MAC_CFG_NIC_PD		BIT(31)
+
+/* Flow-Control Configuration Register */
+#define MTK_MAC_REG_FC_CFG			0x000c
+#define MTK_MAC_BIT_FC_CFG_BP_EN		BIT(7)
+#define MTK_MAC_BIT_FC_CFG_UC_PAUSE_DIR	BIT(8)
+#define MTK_MAC_OFF_FC_CFG_SEND_PAUSE_TH	16
+#define MTK_MAC_MSK_FC_CFG_SEND_PAUSE_TH	GENMASK(27, 16)
+#define MTK_MAC_VAL_FC_CFG_SEND_PAUSE_TH_2K	0x800
+
+/* ARL Configuration Register */
+#define MTK_MAC_REG_ARL_CFG			0x0010
+#define MTK_MAC_BIT_ARL_CFG_HASH_ALG		BIT(0)
+#define MTK_MAC_BIT_ARL_CFG_MISC_MODE		BIT(4)
+
+/* MAC High and Low Bytes Registers */
+#define MTK_MAC_REG_MY_MAC_H			0x0014
+#define MTK_MAC_REG_MY_MAC_L			0x0018
+
+/* Hash Table Control Register */
+#define MTK_MAC_REG_HASH_CTRL			0x001c
+#define MTK_MAC_MSK_HASH_CTRL_HASH_BIT_ADDR	GENMASK(8, 0)
+#define MTK_MAC_BIT_HASH_CTRL_HASH_BIT_DATA	BIT(12)
+#define MTK_MAC_BIT_HASH_CTRL_ACC_CMD		BIT(13)
+#define MTK_MAC_BIT_HASH_CTRL_CMD_START		BIT(14)
+#define MTK_MAC_BIT_HASH_CTRL_BIST_OK		BIT(16)
+#define MTK_MAC_BIT_HASH_CTRL_BIST_DONE		BIT(17)
+#define MTK_MAC_BIT_HASH_CTRL_BIST_EN		BIT(31)
+
+/* TX DMA Control Register */
+#define MTK_MAC_REG_TX_DMA_CTRL			0x0034
+#define MTK_MAC_BIT_TX_DMA_CTRL_START		BIT(0)
+#define MTK_MAC_BIT_TX_DMA_CTRL_STOP		BIT(1)
+#define MTK_MAC_BIT_TX_DMA_CTRL_RESUME		BIT(2)
+
+/* RX DMA Control Register */
+#define MTK_MAC_REG_RX_DMA_CTRL			0x0038
+#define MTK_MAC_BIT_RX_DMA_CTRL_START		BIT(0)
+#define MTK_MAC_BIT_RX_DMA_CTRL_STOP		BIT(1)
+#define MTK_MAC_BIT_RX_DMA_CTRL_RESUME		BIT(2)
+
+/* DMA Address Registers */
+#define MTK_MAC_REG_TX_DPTR			0x003c
+#define MTK_MAC_REG_RX_DPTR			0x0040
+#define MTK_MAC_REG_TX_BASE_ADDR		0x0044
+#define MTK_MAC_REG_RX_BASE_ADDR		0x0048
+
+/* Interrupt Status Register */
+#define MTK_MAC_REG_INT_STS			0x0050
+#define MTK_MAC_REG_INT_STS_PORT_STS_CHG	BIT(2)
+#define MTK_MAC_REG_INT_STS_MIB_CNT_TH		BIT(3)
+#define MTK_MAC_BIT_INT_STS_FNRC		BIT(6)
+#define MTK_MAC_BIT_INT_STS_TNTC		BIT(8)
+
+/* Interrupt Mask Register */
+#define MTK_MAC_REG_INT_MASK			0x0054
+#define MTK_MAC_BIT_INT_MASK_FNRC		BIT(6)
+
+/* Misc. Config Register */
+#define MTK_MAC_REG_TEST1			0x005c
+#define MTK_MAC_BIT_TEST1_RST_HASH_MBIST	BIT(31)
+
+/* Extended Configuration Register */
+#define MTK_MAC_REG_EXT_CFG			0x0060
+#define MTK_MAC_OFF_EXT_CFG_SND_PAUSE_RLS	16
+#define MTK_MAC_MSK_EXT_CFG_SND_PAUSE_RLS	GENMASK(26, 16)
+#define MTK_MAC_VAL_EXT_CFG_SND_PAUSE_RLS_1K	0x400
+
+/* EthSys Configuration Register */
+#define MTK_MAC_REG_SYS_CONF			0x0094
+#define MTK_MAC_BIT_MII_PAD_OUT_ENABLE		BIT(0)
+#define MTK_MAC_BIT_EXT_MDC_MODE		BIT(1)
+#define MTK_MAC_BIT_SWC_MII_MODE		BIT(2)
+
+/* MAC Clock Configuration Register */
+#define MTK_MAC_REG_MAC_CLK_CONF		0x00ac
+#define MTK_MAC_MSK_MAC_CLK_CONF		GENMASK(7, 0)
+#define MTK_MAC_BIT_CLK_DIV_10			0x0a
+
+/* Counter registers. */
+#define MTK_MAC_REG_C_RXOKPKT			0x0100
+#define MTK_MAC_REG_C_RXOKBYTE			0x0104
+#define MTK_MAC_REG_C_RXRUNT			0x0108
+#define MTK_MAC_REG_C_RXLONG			0x010c
+#define MTK_MAC_REG_C_RXDROP			0x0110
+#define MTK_MAC_REG_C_RXCRC			0x0114
+#define MTK_MAC_REG_C_RXARLDROP			0x0118
+#define MTK_MAC_REG_C_RXVLANDROP		0x011c
+#define MTK_MAC_REG_C_RXCSERR			0x0120
+#define MTK_MAC_REG_C_RXPAUSE			0x0124
+#define MTK_MAC_REG_C_TXOKPKT			0x0128
+#define MTK_MAC_REG_C_TXOKBYTE			0x012c
+#define MTK_MAC_REG_C_TXPAUSECOL		0x0130
+#define MTK_MAC_REG_C_TXRTY			0x0134
+#define MTK_MAC_REG_C_TXSKIP			0x0138
+#define MTK_MAC_REG_C_TX_ARP			0x013c
+#define MTK_MAC_REG_C_RX_RERR			0x01d8
+#define MTK_MAC_REG_C_RX_UNI			0x01dc
+#define MTK_MAC_REG_C_RX_MULTI			0x01e0
+#define MTK_MAC_REG_C_RX_BROAD			0x01e4
+#define MTK_MAC_REG_C_RX_ALIGNERR		0x01e8
+#define MTK_MAC_REG_C_TX_UNI			0x01ec
+#define MTK_MAC_REG_C_TX_MULTI			0x01f0
+#define MTK_MAC_REG_C_TX_BROAD			0x01f4
+#define MTK_MAC_REG_C_TX_TIMEOUT		0x01f8
+#define MTK_MAC_REG_C_TX_LATECOL		0x01fc
+#define MTK_MAC_REG_C_RX_LENGTHERR		0x0214
+#define MTK_MAC_REG_C_RX_TWIST			0x0218
+
+/* Ethernet CFG Control */
+#define MTK_PERICFG_REG_NIC_CFG_CON		0x03c4
+#define MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII	GENMASK(3, 0)
+#define MTK_PERICFG_BIT_NIC_CFG_CON_RMII	BIT(0)
+
+/* Represents the actual structure of descriptors used by the MAC. We can
+ * reuse the same structure for both TX and RX - the layout is the same, only
+ * the flags differ slightly.
+ */
+struct mtk_mac_ring_desc {
+	/* Contains both the status flags as well as packet length. */
+	u32 status;
+	u32 data_ptr;
+	u32 vtag;
+	u32 reserved;
+};
+
+#define MTK_MAC_DESC_MSK_LEN			GENMASK(15, 0)
+#define MTK_MAC_DESC_BIT_RX_CRCE		BIT(24)
+#define MTK_MAC_DESC_BIT_RX_OSIZE		BIT(25)
+#define MTK_MAC_DESC_BIT_INT			BIT(27)
+#define MTK_MAC_DESC_BIT_LS			BIT(28)
+#define MTK_MAC_DESC_BIT_FS			BIT(29)
+#define MTK_MAC_DESC_BIT_EOR			BIT(30)
+#define MTK_MAC_DESC_BIT_COWN			BIT(31)
+
+/* Helper structure for storing data read from/written to descriptors in order
+ * to limit reads from/writes to DMA memory.
+ */
+struct mtk_mac_ring_desc_data {
+	unsigned int len;
+	unsigned int flags;
+	dma_addr_t dma_addr;
+	struct sk_buff *skb;
+};
+
+#define MTK_MAC_RING_NUM_DESCS			128
+#define MTK_MAC_NUM_TX_DESCS			MTK_MAC_RING_NUM_DESCS
+#define MTK_MAC_NUM_RX_DESCS			MTK_MAC_RING_NUM_DESCS
+#define MTK_MAC_NUM_DESCS_TOTAL			(MTK_MAC_RING_NUM_DESCS * 2)
+#define MTK_MAC_DMA_SIZE \
+		(MTK_MAC_NUM_DESCS_TOTAL * sizeof(struct mtk_mac_ring_desc))
+
+struct mtk_mac_ring {
+	struct mtk_mac_ring_desc *descs;
+	struct sk_buff *skbs[MTK_MAC_RING_NUM_DESCS];
+	unsigned int head;
+	unsigned int tail;
+	unsigned int count;
+};
+
+struct mtk_mac_priv {
+	struct regmap *regs;
+	struct regmap *pericfg;
+
+	struct clk_bulk_data clks[MTK_MAC_NCLKS];
+
+	void *ring_base;
+	struct mtk_mac_ring_desc *descs_base;
+	dma_addr_t dma_addr;
+	struct mtk_mac_ring tx_ring;
+	struct mtk_mac_ring rx_ring;
+
+	struct mii_bus *mii;
+	struct napi_struct napi;
+
+	struct device_node *phy_node;
+	phy_interface_t phy_intf;
+	struct phy_device *phydev;
+	unsigned int link;
+	int speed;
+	int duplex;
+	int pause;
+
+	/* Protects against concurrent descriptor access. */
+	spinlock_t lock;
+	unsigned long lock_flags;
+
+	struct rtnl_link_stats64 stats;
+};
+
+static struct device *mtk_mac_get_dev(struct mtk_mac_priv *priv)
+{
+	struct net_device *ndev = priv_to_netdev(priv);
+
+	return ndev->dev.parent;
+}
+
+static const struct regmap_config mtk_mac_regmap_config = {
+	.reg_bits		= 32,
+	.val_bits		= 32,
+	.reg_stride		= 4,
+	.fast_io		= true,
+};
+
+static void mtk_mac_ring_init(struct mtk_mac_ring *ring,
+			      struct mtk_mac_ring_desc *descs,
+			      unsigned int start_count)
+{
+	memset(ring, 0, sizeof(*ring));
+	ring->descs = descs;
+	ring->head = 0;
+	ring->tail = 0;
+	ring->count = start_count;
+}
+
+static int mtk_mac_ring_pop_tail(struct mtk_mac_ring *ring,
+				 struct mtk_mac_ring_desc_data *desc_data)
+{
+	struct mtk_mac_ring_desc *desc = &ring->descs[ring->tail];
+	unsigned int status;
+
+	/* Let the device release the descriptor. */
+	dma_rmb();
+	status = desc->status;
+
+	if (!(status & MTK_MAC_DESC_BIT_COWN))
+		return -1;
+
+	desc_data->len = status & MTK_MAC_DESC_MSK_LEN;
+	desc_data->flags = status & ~MTK_MAC_DESC_MSK_LEN;
+	desc_data->dma_addr = desc->data_ptr;
+	desc_data->skb = ring->skbs[ring->tail];
+
+	desc->data_ptr = 0;
+	desc->status = MTK_MAC_DESC_BIT_COWN;
+	if (status & MTK_MAC_DESC_BIT_EOR)
+		desc->status |= MTK_MAC_DESC_BIT_EOR;
+
+	ring->tail = (ring->tail + 1) % MTK_MAC_RING_NUM_DESCS;
+	ring->count--;
+
+	return 0;
+}
+
+static void mtk_mac_ring_push_head(struct mtk_mac_ring *ring,
+				   struct mtk_mac_ring_desc_data *desc_data,
+				   unsigned int flags)
+{
+	struct mtk_mac_ring_desc *desc = &ring->descs[ring->head];
+	unsigned int status;
+
+	status = desc->status;
+
+	ring->skbs[ring->head] = desc_data->skb;
+	desc->data_ptr = desc_data->dma_addr;
+
+	status |= desc_data->len;
+	if (flags)
+		status |= flags;
+	desc->status = status;
+
+	/* Flush modifications before ownership change. */
+	dma_wmb();
+	desc->status &= ~MTK_MAC_DESC_BIT_COWN;
+
+	ring->head = (ring->head + 1) % MTK_MAC_RING_NUM_DESCS;
+	ring->count++;
+}
+
+static void mtk_mac_ring_push_head_rx(struct mtk_mac_ring *ring,
+				      struct mtk_mac_ring_desc_data *desc_data)
+{
+	mtk_mac_ring_push_head(ring, desc_data, 0);
+}
+
+static void mtk_mac_ring_push_head_tx(struct mtk_mac_ring *ring,
+				      struct mtk_mac_ring_desc_data *desc_data)
+{
+	static const unsigned int flags = MTK_MAC_DESC_BIT_FS |
+					  MTK_MAC_DESC_BIT_LS |
+					  MTK_MAC_DESC_BIT_INT;
+
+	mtk_mac_ring_push_head(ring, desc_data, flags);
+}
+
+static bool mtk_mac_ring_full(struct mtk_mac_ring *ring)
+{
+	return ring->count == MTK_MAC_RING_NUM_DESCS;
+}
+
+static bool mtk_mac_ring_descs_available(struct mtk_mac_ring *ring)
+{
+	return ring->count > 0;
+}
+
+static void mtk_mac_lock(struct mtk_mac_priv *priv)
+{
+	spin_lock_irqsave(&priv->lock, priv->lock_flags);
+}
+
+static void mtk_mac_unlock(struct mtk_mac_priv *priv)
+{
+	spin_unlock_irqrestore(&priv->lock, priv->lock_flags);
+}
+
+static dma_addr_t mtk_mac_dma_map_rx(struct mtk_mac_priv *priv,
+				     struct sk_buff *skb)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	/* Data pointer for the RX DMA descriptor must be aligned to 4N + 2. */
+	return dma_map_single(dev, skb_tail_pointer(skb) - 2,
+			      skb_tailroom(skb), DMA_FROM_DEVICE);
+}
+
+static void mtk_mac_dma_unmap_rx(struct mtk_mac_priv *priv,
+				 struct mtk_mac_ring_desc_data *desc_data)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	dma_unmap_single(dev, desc_data->dma_addr,
+			 skb_tailroom(desc_data->skb), DMA_FROM_DEVICE);
+}
+
+static dma_addr_t mtk_mac_dma_map_tx(struct mtk_mac_priv *priv,
+				     struct sk_buff *skb)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	return dma_map_single(dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE);
+}
+
+static void mtk_mac_dma_unmap_tx(struct mtk_mac_priv *priv,
+				 struct mtk_mac_ring_desc_data *desc_data)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	return dma_unmap_single(dev, desc_data->dma_addr,
+				desc_data->len, DMA_TO_DEVICE);
+}
+
+static void mtk_mac_nic_disable_pd(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_MAC_CFG,
+			   MTK_MAC_BIT_MAC_CFG_NIC_PD, 0);
+}
+
+static void mtk_mac_intr_unmask_all(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_INT_MASK, 0);
+}
+
+static void mtk_mac_intr_mask_all(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_INT_MASK, ~0);
+}
+
+static unsigned int mtk_mac_intr_read_and_clear(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	regmap_read(priv->regs, MTK_MAC_REG_INT_STS, &val);
+	regmap_write(priv->regs, MTK_MAC_REG_INT_STS, val);
+
+	return val;
+}
+
+static void mtk_mac_dma_init(struct mtk_mac_priv *priv)
+{
+	struct mtk_mac_ring_desc *desc;
+	unsigned int val;
+	int i;
+
+	priv->descs_base = (struct mtk_mac_ring_desc *)priv->ring_base;
+
+	for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++) {
+		desc = &priv->descs_base[i];
+
+		memset(desc, 0, sizeof(*desc));
+		desc->status = MTK_MAC_DESC_BIT_COWN;
+		if ((i == MTK_MAC_NUM_TX_DESCS - 1) ||
+		    (i == MTK_MAC_NUM_DESCS_TOTAL - 1))
+			desc->status |= MTK_MAC_DESC_BIT_EOR;
+	}
+
+	mtk_mac_ring_init(&priv->tx_ring, priv->descs_base, 0);
+	mtk_mac_ring_init(&priv->rx_ring,
+			  priv->descs_base + MTK_MAC_NUM_TX_DESCS,
+			  MTK_MAC_NUM_RX_DESCS);
+
+	/* Set DMA pointers. */
+	val = (unsigned int)priv->dma_addr;
+	regmap_write(priv->regs, MTK_MAC_REG_TX_BASE_ADDR, val);
+	regmap_write(priv->regs, MTK_MAC_REG_TX_DPTR, val);
+
+	val += sizeof(struct mtk_mac_ring_desc) * MTK_MAC_NUM_TX_DESCS;
+	regmap_write(priv->regs, MTK_MAC_REG_RX_BASE_ADDR, val);
+	regmap_write(priv->regs, MTK_MAC_REG_RX_DPTR, val);
+}
+
+static void mtk_mac_dma_start(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_TX_DMA_CTRL,
+			   MTK_MAC_BIT_TX_DMA_CTRL_START,
+			   MTK_MAC_BIT_TX_DMA_CTRL_START);
+	regmap_update_bits(priv->regs, MTK_MAC_REG_RX_DMA_CTRL,
+			   MTK_MAC_BIT_RX_DMA_CTRL_START,
+			   MTK_MAC_BIT_RX_DMA_CTRL_START);
+}
+
+static void mtk_mac_dma_stop(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_TX_DMA_CTRL,
+		     MTK_MAC_BIT_TX_DMA_CTRL_STOP);
+	regmap_write(priv->regs, MTK_MAC_REG_RX_DMA_CTRL,
+		     MTK_MAC_BIT_RX_DMA_CTRL_STOP);
+}
+
+static void mtk_mac_dma_disable(struct mtk_mac_priv *priv)
+{
+	int i;
+
+	mtk_mac_dma_stop(priv);
+
+	/* Take back all descriptors. */
+	for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++)
+		priv->descs_base[i].status |= MTK_MAC_DESC_BIT_COWN;
+}
+
+static void mtk_mac_dma_resume_rx(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_RX_DMA_CTRL,
+			   MTK_MAC_BIT_RX_DMA_CTRL_RESUME,
+			   MTK_MAC_BIT_RX_DMA_CTRL_RESUME);
+}
+
+static void mtk_mac_dma_resume_tx(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_TX_DMA_CTRL,
+			   MTK_MAC_BIT_TX_DMA_CTRL_RESUME,
+			   MTK_MAC_BIT_TX_DMA_CTRL_RESUME);
+}
+
+static void mtk_mac_set_mac_addr(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	u8 *mac_addr = ndev->dev_addr;
+	unsigned int high, low;
+
+	high = mac_addr[0] << 8 | mac_addr[1] << 0;
+	low = mac_addr[2] << 24 | mac_addr[3] << 16 |
+	      mac_addr[4] << 8 | mac_addr[5];
+
+	regmap_write(priv->regs, MTK_MAC_REG_MY_MAC_H, high);
+	regmap_write(priv->regs, MTK_MAC_REG_MY_MAC_L, low);
+}
+
+static void mtk_mac_reset_counters(struct mtk_mac_priv *priv)
+{
+	static const unsigned int counter_regs[] = {
+		MTK_MAC_REG_C_RXOKPKT,
+		MTK_MAC_REG_C_RXOKBYTE,
+		MTK_MAC_REG_C_RXRUNT,
+		MTK_MAC_REG_C_RXLONG,
+		MTK_MAC_REG_C_RXDROP,
+		MTK_MAC_REG_C_RXCRC,
+		MTK_MAC_REG_C_RXARLDROP,
+		MTK_MAC_REG_C_RXVLANDROP,
+		MTK_MAC_REG_C_RXCSERR,
+		MTK_MAC_REG_C_RXPAUSE,
+		MTK_MAC_REG_C_TXOKPKT,
+		MTK_MAC_REG_C_TXOKBYTE,
+		MTK_MAC_REG_C_TXPAUSECOL,
+		MTK_MAC_REG_C_TXRTY,
+		MTK_MAC_REG_C_TXSKIP,
+		MTK_MAC_REG_C_TX_ARP,
+		MTK_MAC_REG_C_RX_RERR,
+		MTK_MAC_REG_C_RX_UNI,
+		MTK_MAC_REG_C_RX_MULTI,
+		MTK_MAC_REG_C_RX_BROAD,
+		MTK_MAC_REG_C_RX_ALIGNERR,
+		MTK_MAC_REG_C_TX_UNI,
+		MTK_MAC_REG_C_TX_MULTI,
+		MTK_MAC_REG_C_TX_BROAD,
+		MTK_MAC_REG_C_TX_TIMEOUT,
+		MTK_MAC_REG_C_TX_LATECOL,
+		MTK_MAC_REG_C_RX_LENGTHERR,
+		MTK_MAC_REG_C_RX_TWIST,
+	};
+
+	unsigned int i, val;
+
+	for (i = 0; i < ARRAY_SIZE(counter_regs); i++)
+		regmap_read(priv->regs, counter_regs[i], &val);
+}
+
+static void mtk_mac_update_stat(struct mtk_mac_priv *priv,
+				unsigned int reg, u64 *stat)
+{
+	unsigned int val;
+
+	regmap_read(priv->regs, reg, &val);
+	*stat += val;
+}
+
+/* Try to get as many stats as possible from the internal registers instead
+ * of tracking them ourselves.
+ */
+static void mtk_mac_update_stats(struct mtk_mac_priv *priv)
+{
+	struct rtnl_link_stats64 *stats = &priv->stats;
+
+	/* OK packets and bytes. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXOKPKT, &stats->rx_packets);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TXOKPKT, &stats->tx_packets);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXOKBYTE, &stats->rx_bytes);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TXOKBYTE, &stats->tx_bytes);
+
+	/* RX & TX multicast. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_MULTI, &stats->multicast);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TX_MULTI, &stats->multicast);
+
+	/* Collisions. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TXPAUSECOL, &stats->collisions);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TX_LATECOL, &stats->collisions);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXRUNT, &stats->collisions);
+
+	/* RX Errors. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_LENGTHERR,
+			    &stats->rx_length_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXLONG, &stats->rx_over_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXCRC, &stats->rx_crc_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_ALIGNERR,
+			    &stats->rx_frame_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXDROP, &stats->rx_fifo_errors);
+	/* Sum of the general RX error counter + all of the above. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_RERR, &stats->rx_errors);
+	stats->rx_errors += stats->rx_length_errors;
+	stats->rx_errors += stats->rx_over_errors;
+	stats->rx_errors += stats->rx_crc_errors;
+	stats->rx_errors += stats->rx_frame_errors;
+	stats->rx_errors += stats->rx_fifo_errors;
+}
+
+static struct sk_buff *mtk_mac_alloc_skb(struct net_device *ndev)
+{
+	uintptr_t tail, offset;
+	struct sk_buff *skb;
+
+	skb = dev_alloc_skb(MTK_MAC_MAX_FRAME_SIZE);
+	if (!skb)
+		return NULL;
+
+	/* Align to 16 bytes. */
+	tail = (uintptr_t)skb_tail_pointer(skb);
+	if (tail & (MTK_MAC_SKB_ALIGNMENT - 1)) {
+		offset = tail & (MTK_MAC_SKB_ALIGNMENT - 1);
+		skb_reserve(skb, MTK_MAC_SKB_ALIGNMENT - offset);
+	}
+
+	/* Ensure 16-byte alignment of the skb pointer: eth_type_trans() will
+	 * extract the Ethernet header (14 bytes) so we need two more bytes.
+	 */
+	skb_reserve(skb, NET_IP_ALIGN);
+
+	return skb;
+}
+
+static int mtk_mac_prepare_rx_skbs(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->rx_ring;
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct mtk_mac_ring_desc *desc;
+	struct sk_buff *skb;
+	dma_addr_t dma_addr;
+	int i;
+
+	for (i = 0; i < MTK_MAC_NUM_RX_DESCS; i++) {
+		skb = mtk_mac_alloc_skb(ndev);
+		if (!skb)
+			return -ENOMEM;
+
+		dma_addr = mtk_mac_dma_map_rx(priv, skb);
+		if (dma_mapping_error(dev, dma_addr)) {
+			dev_kfree_skb(skb);
+			return -ENOMEM;
+		}
+
+		desc = &ring->descs[i];
+		desc->data_ptr = dma_addr;
+		desc->status |= skb_tailroom(skb) & MTK_MAC_DESC_MSK_LEN;
+		desc->status &= ~MTK_MAC_DESC_BIT_COWN;
+		ring->skbs[i] = skb;
+	}
+
+	ring->count = MTK_MAC_NUM_RX_DESCS;
+
+	return 0;
+}
+
+/* All processing for TX and RX happens in the napi poll callback. */
+static irqreturn_t mtk_mac_handle_irq(int irq, void *data)
+{
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+
+	ndev = data;
+	priv = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		mtk_mac_intr_mask_all(priv);
+		napi_schedule(&priv->napi);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void mtk_mac_free_rx_skbs(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->rx_ring;
+	struct mtk_mac_ring_desc_data desc_data;
+	struct mtk_mac_ring_desc *desc;
+	int i;
+
+	for (i = 0; i < MTK_MAC_NUM_RX_DESCS; i++) {
+		desc = &ring->descs[i];
+
+		if (!desc->data_ptr)
+			continue;
+
+		desc_data.dma_addr = desc->data_ptr;
+		desc_data.skb = ring->skbs[i];
+
+		mtk_mac_dma_unmap_rx(priv, &desc_data);
+		dev_kfree_skb(desc_data.skb);
+	}
+}
+
+static void mtk_mac_free_tx_skbs(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	struct mtk_mac_ring_desc_data desc_data;
+	struct mtk_mac_ring_desc *desc;
+	int i;
+
+	for (i = 0; i < MTK_MAC_NUM_TX_DESCS; i++) {
+		desc = &ring->descs[i];
+
+		if (!desc->data_ptr)
+			continue;
+
+		desc_data.dma_addr = desc->data_ptr;
+		desc_data.len = desc->status & MTK_MAC_DESC_MSK_LEN;
+		desc_data.skb = ring->skbs[i];
+
+		mtk_mac_dma_unmap_tx(priv, &desc_data);
+		dev_kfree_skb(desc_data.skb);
+	}
+}
+
+/* Wait for the completion of any previous command - CMD_START bit must be
+ * cleared by hardware.
+ */
+static int mtk_mac_hash_wait_cmd_start(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout_atomic(priv->regs,
+				MTK_MAC_REG_HASH_CTRL, val,
+				!(val & MTK_MAC_BIT_HASH_CTRL_CMD_START),
+				10, MTK_MAC_WAIT_TIMEOUT);
+}
+
+static int mtk_mac_hash_wait_ok(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+	int ret;
+
+	/* Wait for BIST_DONE bit. */
+	ret = regmap_read_poll_timeout_atomic(priv->regs,
+					MTK_MAC_REG_HASH_CTRL, val,
+					val & MTK_MAC_BIT_HASH_CTRL_BIST_DONE,
+					10, MTK_MAC_WAIT_TIMEOUT);
+	if (ret)
+		return ret;
+
+	/* Check the BIST_OK bit. */
+	regmap_read(priv->regs, MTK_MAC_REG_HASH_CTRL, &val);
+	if (!(val & MTK_MAC_BIT_HASH_CTRL_BIST_OK))
+		return -EIO;
+
+	return 0;
+}
+
+static int mtk_mac_set_hashbit(struct mtk_mac_priv *priv,
+			       unsigned int hash_addr)
+{
+	unsigned int val;
+	int ret;
+
+	ret = mtk_mac_hash_wait_cmd_start(priv);
+	if (ret)
+		return ret;
+
+	val = hash_addr & MTK_MAC_MSK_HASH_CTRL_HASH_BIT_ADDR;
+	val |= MTK_MAC_BIT_HASH_CTRL_ACC_CMD;
+	val |= MTK_MAC_BIT_HASH_CTRL_CMD_START;
+	val |= MTK_MAC_BIT_HASH_CTRL_BIST_EN;
+	val |= MTK_MAC_BIT_HASH_CTRL_HASH_BIT_DATA;
+	regmap_write(priv->regs, MTK_MAC_REG_HASH_CTRL, val);
+
+	return mtk_mac_hash_wait_ok(priv);
+}
+
+static int mtk_mac_reset_hash_table(struct mtk_mac_priv *priv)
+{
+	int ret;
+
+	ret = mtk_mac_hash_wait_cmd_start(priv);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(priv->regs, MTK_MAC_REG_HASH_CTRL,
+			   MTK_MAC_BIT_HASH_CTRL_BIST_EN,
+			   MTK_MAC_BIT_HASH_CTRL_BIST_EN);
+	regmap_update_bits(priv->regs, MTK_MAC_REG_TEST1,
+			   MTK_MAC_BIT_TEST1_RST_HASH_MBIST,
+			   MTK_MAC_BIT_TEST1_RST_HASH_MBIST);
+
+	return mtk_mac_hash_wait_ok(priv);
+}
+
+static void mtk_mac_phy_config(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	if (priv->speed == SPEED_1000)
+		val = MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_1000M;
+	else if (priv->speed == SPEED_100)
+		val = MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_100M;
+	else
+		val = MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_10M;
+	val <<= MTK_MAC_OFF_PHY_CTRL1_FORCE_SPD;
+
+	val |= MTK_MAC_BIT_PHY_CTRL1_AN_EN;
+	val |= MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_RX;
+	val |= MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_TX;
+	/* Only full-duplex supported for now. */
+	val |= MTK_MAC_BIT_PHY_CTRL1_FORCE_DPX;
+
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL1, val);
+
+	if (priv->pause) {
+		val = MTK_MAC_VAL_FC_CFG_SEND_PAUSE_TH_2K;
+		val <<= MTK_MAC_OFF_FC_CFG_SEND_PAUSE_TH;
+		val |= MTK_MAC_BIT_FC_CFG_UC_PAUSE_DIR;
+	} else {
+		val = 0;
+	}
+
+	regmap_update_bits(priv->regs, MTK_MAC_REG_FC_CFG,
+			   MTK_MAC_MSK_FC_CFG_SEND_PAUSE_TH |
+			   MTK_MAC_BIT_FC_CFG_UC_PAUSE_DIR, val);
+
+	if (priv->pause) {
+		val = MTK_MAC_VAL_EXT_CFG_SND_PAUSE_RLS_1K;
+		val <<= MTK_MAC_OFF_EXT_CFG_SND_PAUSE_RLS;
+	} else {
+		val = 0;
+	}
+
+	regmap_update_bits(priv->regs, MTK_MAC_REG_EXT_CFG,
+			   MTK_MAC_MSK_EXT_CFG_SND_PAUSE_RLS, val);
+}
+
+static void mtk_mac_adjust_link(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct phy_device *phydev = priv->phydev;
+	bool new_state = false;
+
+	if (phydev->link) {
+		if (!priv->link) {
+			priv->link = phydev->link;
+			new_state = true;
+		}
+
+		if (priv->speed != phydev->speed) {
+			priv->speed = phydev->speed;
+			new_state = true;
+		}
+
+		if (priv->pause != phydev->pause) {
+			priv->pause = phydev->pause;
+			new_state = true;
+		}
+	} else {
+		if (priv->link) {
+			priv->link = phydev->link;
+			new_state = true;
+		}
+	}
+
+	if (new_state) {
+		if (phydev->link)
+			mtk_mac_phy_config(priv);
+		phy_print_status(ndev->phydev);
+	}
+}
+
+static void mtk_mac_init_config(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	val = (MTK_MAC_BIT_MII_PAD_OUT_ENABLE |
+	       MTK_MAC_BIT_EXT_MDC_MODE |
+	       MTK_MAC_BIT_SWC_MII_MODE);
+
+	regmap_write(priv->regs, MTK_MAC_REG_SYS_CONF, val);
+	regmap_update_bits(priv->regs, MTK_MAC_REG_MAC_CLK_CONF,
+			   MTK_MAC_MSK_MAC_CLK_CONF,
+			   MTK_MAC_BIT_CLK_DIV_10);
+}
+
+static void mtk_mac_set_mode_rmii(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG_CON,
+			   MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII,
+			   MTK_PERICFG_BIT_NIC_CFG_CON_RMII);
+}
+
+static int mtk_mac_enable(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	unsigned int val;
+	int ret;
+
+	mtk_mac_nic_disable_pd(priv);
+	mtk_mac_intr_mask_all(priv);
+	mtk_mac_dma_stop(priv);
+
+	mtk_mac_set_mac_addr(ndev);
+
+	/* Configure the MAC */
+	val = MTK_MAC_VAL_MAC_CFG_IPG_96BIT;
+	val <<= MTK_MAC_OFF_MAC_CFG_IPG;
+	val |= MTK_MAC_BIT_MAC_CFG_MAXLEN_1522;
+	val |= MTK_MAC_BIT_MAC_CFG_AUTO_PAD;
+	val |= MTK_MAC_BIT_MAC_CFG_CRC_STRIP;
+	regmap_write(priv->regs, MTK_MAC_REG_MAC_CFG, val);
+
+	/* Enable Hash Table BIST and reset it */
+	ret = mtk_mac_reset_hash_table(priv);
+	if (ret)
+		return ret;
+
+	/* Setup the hashing algorithm */
+	regmap_update_bits(priv->regs, MTK_MAC_REG_ARL_CFG,
+			   MTK_MAC_BIT_ARL_CFG_HASH_ALG |
+			   MTK_MAC_BIT_ARL_CFG_MISC_MODE, 0);
+
+	/* Don't strip VLAN tags */
+	regmap_update_bits(priv->regs, MTK_MAC_REG_MAC_CFG,
+			   MTK_MAC_BIT_MAC_CFG_VLAN_STRIP, 0);
+
+	/* Setup DMA */
+	mtk_mac_dma_init(priv);
+
+	ret = mtk_mac_prepare_rx_skbs(ndev);
+	if (ret)
+		goto err_out;
+
+	/* Request the interrupt */
+	ret = request_irq(ndev->irq, mtk_mac_handle_irq,
+			  IRQF_TRIGGER_FALLING, ndev->name, ndev);
+	if (ret)
+		goto err_free_skbs;
+
+	napi_enable(&priv->napi);
+
+	mtk_mac_intr_read_and_clear(priv);
+	mtk_mac_intr_unmask_all(priv);
+
+	/* Connect to and start PHY */
+	priv->phydev = of_phy_connect(ndev, priv->phy_node,
+				      mtk_mac_adjust_link, 0, priv->phy_intf);
+	if (!priv->phydev) {
+		netdev_err(ndev, "failed to connect to PHY\n");
+		goto err_free_irq;
+	}
+
+	mtk_mac_dma_start(priv);
+	phy_start(priv->phydev);
+	netif_start_queue(ndev);
+
+	return 0;
+
+err_free_irq:
+	free_irq(ndev->irq, ndev);
+err_free_skbs:
+	mtk_mac_free_rx_skbs(ndev);
+err_out:
+	return ret;
+}
+
+static void mtk_mac_disable(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	napi_disable(&priv->napi);
+	mtk_mac_intr_mask_all(priv);
+	mtk_mac_dma_disable(priv);
+	mtk_mac_intr_read_and_clear(priv);
+	phy_stop(priv->phydev);
+	phy_disconnect(priv->phydev);
+	free_irq(ndev->irq, ndev);
+	mtk_mac_free_rx_skbs(ndev);
+	mtk_mac_free_tx_skbs(ndev);
+}
+
+static int mtk_mac_netdev_open(struct net_device *ndev)
+{
+	return mtk_mac_enable(ndev);
+}
+
+static int mtk_mac_netdev_stop(struct net_device *ndev)
+{
+	mtk_mac_disable(ndev);
+
+	return 0;
+}
+
+static int mtk_mac_netdev_ioctl(struct net_device *ndev,
+				struct ifreq *req, int cmd)
+{
+	if (!netif_running(ndev))
+		return -EINVAL;
+
+	return phy_mii_ioctl(ndev->phydev, req, cmd);
+}
+
+static int mtk_mac_netdev_start_xmit(struct sk_buff *skb,
+				     struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct mtk_mac_ring_desc_data desc_data;
+
+	desc_data.dma_addr = mtk_mac_dma_map_tx(priv, skb);
+	if (dma_mapping_error(dev, desc_data.dma_addr))
+		goto err_drop_packet;
+
+	desc_data.skb = skb;
+	desc_data.len = skb->len;
+
+	mtk_mac_lock(priv);
+	mtk_mac_ring_push_head_tx(ring, &desc_data);
+
+	if (mtk_mac_ring_full(ring))
+		netif_stop_queue(ndev);
+	mtk_mac_unlock(priv);
+
+	mtk_mac_dma_resume_tx(priv);
+
+	return NETDEV_TX_OK;
+
+err_drop_packet:
+	dev_kfree_skb(skb);
+	ndev->stats.tx_dropped++;
+	return NETDEV_TX_BUSY;
+}
+
+static int mtk_mac_tx_complete_one(struct mtk_mac_priv *priv)
+{
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	struct mtk_mac_ring_desc_data desc_data;
+	int ret;
+
+	ret = mtk_mac_ring_pop_tail(ring, &desc_data);
+	if (ret)
+		return ret;
+
+	mtk_mac_dma_unmap_tx(priv, &desc_data);
+	dev_kfree_skb_irq(desc_data.skb);
+
+	return 0;
+}
+
+static void mtk_mac_tx_complete_all(struct mtk_mac_priv *priv)
+{
+	struct net_device *ndev = priv_to_netdev(priv);
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	int ret;
+
+	for (;;) {
+		mtk_mac_lock(priv);
+
+		if (!mtk_mac_ring_descs_available(ring)) {
+			mtk_mac_unlock(priv);
+			break;
+		}
+
+		ret = mtk_mac_tx_complete_one(priv);
+		if (ret) {
+			mtk_mac_unlock(priv);
+			break;
+		}
+
+		if (netif_queue_stopped(ndev))
+			netif_wake_queue(ndev);
+
+		mtk_mac_unlock(priv);
+	}
+}
+
+static void mtk_mac_netdev_get_stats64(struct net_device *ndev,
+				       struct rtnl_link_stats64 *stats)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+
+	mtk_mac_update_stats(priv);
+
+	memcpy(stats, &priv->stats, sizeof(*stats));
+}
+
+static void mtk_mac_set_rx_mode(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct netdev_hw_addr *hw_addr;
+	unsigned int hash_addr, i;
+	int ret;
+
+	if (ndev->flags & IFF_PROMISC) {
+		regmap_update_bits(priv->regs, MTK_MAC_REG_ARL_CFG,
+				   MTK_MAC_BIT_ARL_CFG_MISC_MODE,
+				   MTK_MAC_BIT_ARL_CFG_MISC_MODE);
+	} else if (netdev_mc_count(ndev) > MTK_MAC_HASHTABLE_MC_LIMIT ||
+		   ndev->flags & IFF_ALLMULTI) {
+		for (i = 0; i < MTK_MAC_HASHTABLE_SIZE_MAX; i++) {
+			ret = mtk_mac_set_hashbit(priv, i);
+			if (ret)
+				goto hash_fail;
+		}
+	} else {
+		/* Clear previous settings. */
+		ret = mtk_mac_reset_hash_table(priv);
+		if (ret)
+			goto hash_fail;
+
+		netdev_for_each_mc_addr(hw_addr, ndev) {
+			hash_addr = (hw_addr->addr[0] & 0x01) << 8;
+			hash_addr += hw_addr->addr[5];
+			ret = mtk_mac_set_hashbit(priv, hash_addr);
+			if (ret)
+				goto hash_fail;
+		}
+	}
+
+	return;
+
+hash_fail:
+	if (ret == -ETIMEDOUT)
+		netdev_err(ndev, "setting hash bit timed out\n");
+	else
+		/* Should be -EIO */
+		netdev_err(ndev, "unable to set hash bit");
+}
+
+static const struct net_device_ops mtk_mac_netdev_ops = {
+	.ndo_open		= mtk_mac_netdev_open,
+	.ndo_stop		= mtk_mac_netdev_stop,
+	.ndo_start_xmit		= mtk_mac_netdev_start_xmit,
+	.ndo_get_stats64	= mtk_mac_netdev_get_stats64,
+	.ndo_set_rx_mode	= mtk_mac_set_rx_mode,
+	.ndo_do_ioctl		= mtk_mac_netdev_ioctl,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static void mtk_mac_get_drvinfo(struct net_device *dev,
+				struct ethtool_drvinfo *info)
+{
+	strlcpy(info->driver, MTK_MAC_DRVNAME, sizeof(info->driver));
+}
+
+/* TODO Add ethtool stats. */
+static const struct ethtool_ops mtk_mac_ethtool_ops = {
+	.get_drvinfo		= mtk_mac_get_drvinfo,
+	.get_link		= ethtool_op_get_link,
+	.get_link_ksettings	= phy_ethtool_get_link_ksettings,
+	.set_link_ksettings	= phy_ethtool_set_link_ksettings,
+};
+
+static int mtk_mac_receive_packet(struct mtk_mac_priv *priv)
+{
+	struct net_device *ndev = priv_to_netdev(priv);
+	struct mtk_mac_ring *ring = &priv->rx_ring;
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct mtk_mac_ring_desc_data desc_data;
+	struct sk_buff *curr_skb, *new_skb;
+	dma_addr_t new_dma_addr;
+	int ret;
+
+	mtk_mac_lock(priv);
+	ret = mtk_mac_ring_pop_tail(ring, &desc_data);
+	mtk_mac_unlock(priv);
+	if (ret)
+		return -1;
+
+	curr_skb = desc_data.skb;
+
+	if ((desc_data.flags & MTK_MAC_DESC_BIT_RX_CRCE) ||
+	    (desc_data.flags & MTK_MAC_DESC_BIT_RX_OSIZE)) {
+		/* Error packet -> drop and reuse skb. */
+		new_skb = curr_skb;
+		goto push_new_skb;
+	}
+
+	/* Prepare new skb before receiving the current one. Reuse the current
+	 * skb if we fail at any point.
+	 */
+	new_skb = mtk_mac_alloc_skb(ndev);
+	if (!new_skb) {
+		ndev->stats.rx_dropped++;
+		new_skb = curr_skb;
+		goto push_new_skb;
+	}
+
+	new_dma_addr = mtk_mac_dma_map_rx(priv, new_skb);
+	if (dma_mapping_error(dev, new_dma_addr)) {
+		ndev->stats.rx_dropped++;
+		dev_kfree_skb(new_skb);
+		new_skb = curr_skb;
+		netdev_err(ndev, "DMA mapping error of RX descriptor\n");
+		goto push_new_skb;
+	}
+
+	/* We can't fail anymore at this point: it's safe to unmap the skb. */
+	mtk_mac_dma_unmap_rx(priv, &desc_data);
+
+	skb_put(desc_data.skb, desc_data.len);
+	desc_data.skb->ip_summed = CHECKSUM_NONE;
+	desc_data.skb->protocol = eth_type_trans(desc_data.skb, ndev);
+	desc_data.skb->dev = ndev;
+	netif_receive_skb(desc_data.skb);
+
+push_new_skb:
+	desc_data.dma_addr = new_dma_addr;
+	desc_data.len = skb_tailroom(new_skb);
+	desc_data.skb = new_skb;
+
+	mtk_mac_lock(priv);
+	mtk_mac_ring_push_head_rx(ring, &desc_data);
+	mtk_mac_unlock(priv);
+
+	return 0;
+}
+
+static int mtk_mac_process_rx(struct mtk_mac_priv *priv, int budget)
+{
+	int received, ret;
+
+	for (received = 0, ret = 0; received < budget && ret == 0; received++)
+		ret = mtk_mac_receive_packet(priv);
+
+	mtk_mac_dma_resume_rx(priv);
+
+	return received;
+}
+
+static int mtk_mac_poll(struct napi_struct *napi, int budget)
+{
+	struct mtk_mac_priv *priv;
+	unsigned int status;
+	int received = 0;
+
+	priv = container_of(napi, struct mtk_mac_priv, napi);
+
+	status = mtk_mac_intr_read_and_clear(priv);
+
+	/* Clean up TX */
+	if (status & MTK_MAC_BIT_INT_STS_TNTC)
+		mtk_mac_tx_complete_all(priv);
+
+	/* Receive up to $budget packets */
+	if (status & MTK_MAC_BIT_INT_STS_FNRC)
+		received = mtk_mac_process_rx(priv, budget);
+
+	/* One of the counter reached 0x8000000 */
+	if (status & MTK_MAC_REG_INT_STS_MIB_CNT_TH) {
+		mtk_mac_update_stats(priv);
+		mtk_mac_reset_counters(priv);
+	}
+
+	if (received < budget)
+		napi_complete_done(napi, received);
+
+	mtk_mac_intr_unmask_all(priv);
+
+	return received;
+}
+
+static void mtk_mac_mdio_rwok_clear(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL0,
+		     MTK_MAC_BIT_PHY_CTRL0_RWOK);
+}
+
+static int mtk_mac_mdio_rwok_wait(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(priv->regs, MTK_MAC_REG_PHY_CTRL0,
+					val, val & MTK_MAC_BIT_PHY_CTRL0_RWOK,
+					10, MTK_MAC_WAIT_TIMEOUT);
+}
+
+static int mtk_mac_mdio_read(struct mii_bus *mii, int phy_id, int regnum)
+{
+	struct mtk_mac_priv *priv = mii->priv;
+	unsigned int val, data;
+	int ret;
+
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	mtk_mac_mdio_rwok_clear(priv);
+
+	val = (regnum << MTK_MAC_OFF_PHY_CTRL0_PREG);
+	val &= MTK_MAC_MSK_PHY_CTRL0_PREG;
+	val |= MTK_MAC_BIT_PHY_CTRL0_RDCMD;
+
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL0, val);
+
+	ret = mtk_mac_mdio_rwok_wait(priv);
+	if (ret)
+		return ret;
+
+	regmap_read(priv->regs, MTK_MAC_REG_PHY_CTRL0, &data);
+
+	data &= MTK_MAC_MSK_PHY_CTRL0_RWDATA;
+	data >>= MTK_MAC_OFF_PHY_CTRL0_RWDATA;
+
+	return data;
+}
+
+static int mtk_mac_mdio_write(struct mii_bus *mii, int phy_id,
+			      int regnum, u16 data)
+{
+	struct mtk_mac_priv *priv = mii->priv;
+	unsigned int val;
+
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	mtk_mac_mdio_rwok_clear(priv);
+
+	val = data;
+	val <<= MTK_MAC_OFF_PHY_CTRL0_RWDATA;
+	val &= MTK_MAC_MSK_PHY_CTRL0_RWDATA;
+	regnum <<= MTK_MAC_OFF_PHY_CTRL0_PREG;
+	regnum &= MTK_MAC_MSK_PHY_CTRL0_PREG;
+	val |= regnum;
+	val |= MTK_MAC_BIT_PHY_CTRL0_WTCMD;
+
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL0, val);
+
+	return mtk_mac_mdio_rwok_wait(priv);
+}
+
+static int mtk_mac_mdio_init(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct device_node *of_node, *mdio_node;
+	int ret;
+
+	of_node = dev->of_node;
+
+	mdio_node = of_get_child_by_name(of_node, "mdio");
+	if (!mdio_node)
+		return -ENODEV;
+
+	if (!of_device_is_available(mdio_node)) {
+		ret = -ENODEV;
+		goto out_put_node;
+	}
+
+	priv->mii = devm_mdiobus_alloc(dev);
+	if (!priv->mii) {
+		ret = -ENOMEM;
+		goto out_put_node;
+	}
+
+	snprintf(priv->mii->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
+	priv->mii->name = "mtk-mac-mdio";
+	priv->mii->parent = dev;
+	priv->mii->read = mtk_mac_mdio_read;
+	priv->mii->write = mtk_mac_mdio_write;
+	priv->mii->priv = priv;
+
+	ret = of_mdiobus_register(priv->mii, mdio_node);
+
+out_put_node:
+	of_node_put(mdio_node);
+	return ret;
+}
+
+static int mtk_mac_suspend(struct device *dev)
+{
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+
+	ndev = dev_get_drvdata(dev);
+	priv = netdev_priv(ndev);
+
+	mtk_mac_disable(ndev);
+	clk_bulk_disable_unprepare(MTK_MAC_NCLKS, priv->clks);
+
+	return 0;
+}
+
+static int mtk_mac_resume(struct device *dev)
+{
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+	int ret;
+
+	ndev = dev_get_drvdata(dev);
+	priv = netdev_priv(ndev);
+
+	ret = clk_bulk_prepare_enable(MTK_MAC_NCLKS, priv->clks);
+	if (ret)
+		return ret;
+
+	ret = mtk_mac_enable(ndev);
+	if (ret)
+		clk_bulk_disable_unprepare(MTK_MAC_NCLKS, priv->clks);
+
+	return ret;
+}
+
+static void mtk_mac_clk_disable_unprepare(void *data)
+{
+	struct mtk_mac_priv *priv = data;
+
+	clk_bulk_disable_unprepare(MTK_MAC_NCLKS, priv->clks);
+}
+
+static int mtk_mac_probe(struct platform_device *pdev)
+{
+	struct device_node *of_node;
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+	struct device *dev;
+	void __iomem *base;
+	int ret, i;
+
+	dev = &pdev->dev;
+	of_node = dev->of_node;
+
+	ndev = devm_alloc_etherdev(dev, sizeof(*priv));
+	if (!ndev)
+		return -ENOMEM;
+
+	priv = netdev_priv(ndev);
+	SET_NETDEV_DEV(ndev, dev);
+	platform_set_drvdata(pdev, ndev);
+
+	ndev->min_mtu = ETH_ZLEN;
+	ndev->max_mtu = MTK_MAC_MAX_FRAME_SIZE;
+
+	spin_lock_init(&priv->lock);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* We won't be checking the return values of regmap read & write
+	 * functions. They can only fail for mmio if there's a clock attached
+	 * to regmap which is not the case here.
+	 */
+	priv->regs = devm_regmap_init_mmio(dev, base,
+					   &mtk_mac_regmap_config);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	priv->pericfg = syscon_regmap_lookup_by_phandle(of_node,
+							"mediatek,pericfg");
+	if (IS_ERR(priv->pericfg)) {
+		dev_err(dev, "Failed to lookup the PERICFG syscon\n");
+		return PTR_ERR(priv->pericfg);
+	}
+
+	ndev->irq = platform_get_irq(pdev, 0);
+	if (ndev->irq < 0)
+		return ndev->irq;
+
+	for (i = 0; i < MTK_MAC_NCLKS; i++)
+		priv->clks[i].id = mtk_mac_clk_names[i];
+	ret = devm_clk_bulk_get(dev, MTK_MAC_NCLKS, priv->clks);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(MTK_MAC_NCLKS, priv->clks);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev,
+				       mtk_mac_clk_disable_unprepare, priv);
+	if (ret)
+		return ret;
+
+	ret = of_get_phy_mode(of_node, &priv->phy_intf);
+	if (ret) {
+		return ret;
+	} else if (priv->phy_intf != PHY_INTERFACE_MODE_RMII) {
+		dev_err(dev, "unsupported phy mode: %s\n",
+			phy_modes(priv->phy_intf));
+		return -EINVAL;
+	}
+
+	priv->phy_node = of_parse_phandle(of_node, "phy-handle", 0);
+	if (!priv->phy_node) {
+		dev_err(dev, "failed to retrieve the phy handle from device tree\n");
+		return -ENODEV;
+	}
+
+	mtk_mac_set_mode_rmii(priv);
+
+	dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	priv->ring_base = dmam_alloc_coherent(dev, MTK_MAC_DMA_SIZE,
+					      &priv->dma_addr,
+					      GFP_KERNEL | GFP_DMA);
+	if (!priv->ring_base)
+		return -ENOMEM;
+
+	mtk_mac_nic_disable_pd(priv);
+	mtk_mac_init_config(priv);
+
+	ret = mtk_mac_mdio_init(ndev);
+	if (ret)
+		return ret;
+
+	ret = eth_platform_get_mac_address(dev, ndev->dev_addr);
+	if (ret || !is_valid_ether_addr(ndev->dev_addr))
+		eth_hw_addr_random(ndev);
+
+	ndev->netdev_ops = &mtk_mac_netdev_ops;
+	ndev->ethtool_ops = &mtk_mac_ethtool_ops;
+
+	netif_napi_add(ndev, &priv->napi, mtk_mac_poll, MTK_MAC_NAPI_WEIGHT);
+
+	return devm_register_netdev(dev, ndev);
+}
+
+static const struct of_device_id mtk_mac_of_match[] = {
+	{ .compatible = "mediatek,mt8516-eth", },
+	{ .compatible = "mediatek,mt8518-eth", },
+	{ .compatible = "mediatek,mt8175-eth", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mtk_mac_of_match);
+
+static SIMPLE_DEV_PM_OPS(mtk_mac_pm_ops,
+			 mtk_mac_suspend, mtk_mac_resume);
+
+static struct platform_driver mtk_mac_driver = {
+	.driver = {
+		.name = MTK_MAC_DRVNAME,
+		.pm = &mtk_mac_pm_ops,
+		.of_match_table = of_match_ptr(mtk_mac_of_match),
+	},
+	.probe = mtk_mac_probe,
+};
+module_platform_driver(mtk_mac_driver);
+
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_DESCRIPTION("Mediatek Ethernet MAC Driver");
+MODULE_LICENSE("GPL");
-- 
2.25.0

[PATCH v2 09/14] net: ethernet: mtk-eth-mac: new driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds the driver for the MediaTek Ethernet MAC used on the MT8* SoC
family. For now we only support full-duplex.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/mediatek/Kconfig       |    6 +
 drivers/net/ethernet/mediatek/Makefile      |    1 +
 drivers/net/ethernet/mediatek/mtk_eth_mac.c | 1561 +++++++++++++++++++
 3 files changed, 1568 insertions(+)
 create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_mac.c

diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
index 5079b8090f16..5c3793076765 100644
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -14,4 +14,10 @@ config NET_MEDIATEK_SOC
 	  This driver supports the gigabit ethernet MACs in the
 	  MediaTek SoC family.
 
+config NET_MEDIATEK_MAC
+	tristate "MediaTek Ethernet MAC support"
+	select PHYLIB
+	help
+	  This driver supports the ethernet IP on MediaTek MT85** SoCs.
+
 endif #NET_VENDOR_MEDIATEK
diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile
index 3362fb7ef859..f7f5638943a0 100644
--- a/drivers/net/ethernet/mediatek/Makefile
+++ b/drivers/net/ethernet/mediatek/Makefile
@@ -5,3 +5,4 @@
 
 obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
 mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o
+obj-$(CONFIG_NET_MEDIATEK_MAC) += mtk_eth_mac.o
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_mac.c b/drivers/net/ethernet/mediatek/mtk_eth_mac.c
new file mode 100644
index 000000000000..fffaa452f55d
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/mtk_eth_mac.c
@@ -0,0 +1,1561 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 MediaTek Corporation
+ * Copyright (c) 2020 BayLibre SAS
+ *
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+
+#define MTK_MAC_DRVNAME				"mtk_eth_mac"
+
+#define MTK_MAC_WAIT_TIMEOUT			300
+#define MTK_MAC_MAX_FRAME_SIZE			1514
+#define MTK_MAC_SKB_ALIGNMENT			16
+#define MTK_MAC_NAPI_WEIGHT			64
+#define MTK_MAC_HASHTABLE_MC_LIMIT		256
+#define MTK_MAC_HASHTABLE_SIZE_MAX		512
+
+/* This is defined to 0 on arm64 in arch/arm64/include/asm/processor.h but
+ * this IP doesn't work without this alignment being equal to 2.
+ */
+#ifdef NET_IP_ALIGN
+#undef NET_IP_ALIGN
+#endif
+#define NET_IP_ALIGN				2
+
+static const char *const mtk_mac_clk_names[] = { "core", "reg", "trans" };
+#define MTK_MAC_NCLKS ARRAY_SIZE(mtk_mac_clk_names)
+
+/* PHY Control Register 0 */
+#define MTK_MAC_REG_PHY_CTRL0			0x0000
+#define MTK_MAC_BIT_PHY_CTRL0_WTCMD		BIT(13)
+#define MTK_MAC_BIT_PHY_CTRL0_RDCMD		BIT(14)
+#define MTK_MAC_BIT_PHY_CTRL0_RWOK		BIT(15)
+#define MTK_MAC_MSK_PHY_CTRL0_PREG		GENMASK(12, 8)
+#define MTK_MAC_OFF_PHY_CTRL0_PREG		8
+#define MTK_MAC_MSK_PHY_CTRL0_RWDATA		GENMASK(31, 16)
+#define MTK_MAC_OFF_PHY_CTRL0_RWDATA		16
+
+/* PHY Control Register 1 */
+#define MTK_MAC_REG_PHY_CTRL1			0x0004
+#define MTK_MAC_BIT_PHY_CTRL1_LINK_ST		BIT(0)
+#define MTK_MAC_BIT_PHY_CTRL1_AN_EN		BIT(8)
+#define MTK_MAC_OFF_PHY_CTRL1_FORCE_SPD		9
+#define MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_10M	0x00
+#define MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_100M	0x01
+#define MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_1000M	0x02
+#define MTK_MAC_BIT_PHY_CTRL1_FORCE_DPX		BIT(11)
+#define MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_RX	BIT(12)
+#define MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_TX	BIT(13)
+
+/* MAC Configuration Register */
+#define MTK_MAC_REG_MAC_CFG			0x0008
+#define MTK_MAC_OFF_MAC_CFG_IPG			10
+#define MTK_MAC_VAL_MAC_CFG_IPG_96BIT		GENMASK(4, 0)
+#define MTK_MAC_BIT_MAC_CFG_MAXLEN_1522		BIT(16)
+#define MTK_MAC_BIT_MAC_CFG_AUTO_PAD		BIT(19)
+#define MTK_MAC_BIT_MAC_CFG_CRC_STRIP		BIT(20)
+#define MTK_MAC_BIT_MAC_CFG_VLAN_STRIP		BIT(22)
+#define MTK_MAC_BIT_MAC_CFG_NIC_PD		BIT(31)
+
+/* Flow-Control Configuration Register */
+#define MTK_MAC_REG_FC_CFG			0x000c
+#define MTK_MAC_BIT_FC_CFG_BP_EN		BIT(7)
+#define MTK_MAC_BIT_FC_CFG_UC_PAUSE_DIR	BIT(8)
+#define MTK_MAC_OFF_FC_CFG_SEND_PAUSE_TH	16
+#define MTK_MAC_MSK_FC_CFG_SEND_PAUSE_TH	GENMASK(27, 16)
+#define MTK_MAC_VAL_FC_CFG_SEND_PAUSE_TH_2K	0x800
+
+/* ARL Configuration Register */
+#define MTK_MAC_REG_ARL_CFG			0x0010
+#define MTK_MAC_BIT_ARL_CFG_HASH_ALG		BIT(0)
+#define MTK_MAC_BIT_ARL_CFG_MISC_MODE		BIT(4)
+
+/* MAC High and Low Bytes Registers */
+#define MTK_MAC_REG_MY_MAC_H			0x0014
+#define MTK_MAC_REG_MY_MAC_L			0x0018
+
+/* Hash Table Control Register */
+#define MTK_MAC_REG_HASH_CTRL			0x001c
+#define MTK_MAC_MSK_HASH_CTRL_HASH_BIT_ADDR	GENMASK(8, 0)
+#define MTK_MAC_BIT_HASH_CTRL_HASH_BIT_DATA	BIT(12)
+#define MTK_MAC_BIT_HASH_CTRL_ACC_CMD		BIT(13)
+#define MTK_MAC_BIT_HASH_CTRL_CMD_START		BIT(14)
+#define MTK_MAC_BIT_HASH_CTRL_BIST_OK		BIT(16)
+#define MTK_MAC_BIT_HASH_CTRL_BIST_DONE		BIT(17)
+#define MTK_MAC_BIT_HASH_CTRL_BIST_EN		BIT(31)
+
+/* TX DMA Control Register */
+#define MTK_MAC_REG_TX_DMA_CTRL			0x0034
+#define MTK_MAC_BIT_TX_DMA_CTRL_START		BIT(0)
+#define MTK_MAC_BIT_TX_DMA_CTRL_STOP		BIT(1)
+#define MTK_MAC_BIT_TX_DMA_CTRL_RESUME		BIT(2)
+
+/* RX DMA Control Register */
+#define MTK_MAC_REG_RX_DMA_CTRL			0x0038
+#define MTK_MAC_BIT_RX_DMA_CTRL_START		BIT(0)
+#define MTK_MAC_BIT_RX_DMA_CTRL_STOP		BIT(1)
+#define MTK_MAC_BIT_RX_DMA_CTRL_RESUME		BIT(2)
+
+/* DMA Address Registers */
+#define MTK_MAC_REG_TX_DPTR			0x003c
+#define MTK_MAC_REG_RX_DPTR			0x0040
+#define MTK_MAC_REG_TX_BASE_ADDR		0x0044
+#define MTK_MAC_REG_RX_BASE_ADDR		0x0048
+
+/* Interrupt Status Register */
+#define MTK_MAC_REG_INT_STS			0x0050
+#define MTK_MAC_REG_INT_STS_PORT_STS_CHG	BIT(2)
+#define MTK_MAC_REG_INT_STS_MIB_CNT_TH		BIT(3)
+#define MTK_MAC_BIT_INT_STS_FNRC		BIT(6)
+#define MTK_MAC_BIT_INT_STS_TNTC		BIT(8)
+
+/* Interrupt Mask Register */
+#define MTK_MAC_REG_INT_MASK			0x0054
+#define MTK_MAC_BIT_INT_MASK_FNRC		BIT(6)
+
+/* Misc. Config Register */
+#define MTK_MAC_REG_TEST1			0x005c
+#define MTK_MAC_BIT_TEST1_RST_HASH_MBIST	BIT(31)
+
+/* Extended Configuration Register */
+#define MTK_MAC_REG_EXT_CFG			0x0060
+#define MTK_MAC_OFF_EXT_CFG_SND_PAUSE_RLS	16
+#define MTK_MAC_MSK_EXT_CFG_SND_PAUSE_RLS	GENMASK(26, 16)
+#define MTK_MAC_VAL_EXT_CFG_SND_PAUSE_RLS_1K	0x400
+
+/* EthSys Configuration Register */
+#define MTK_MAC_REG_SYS_CONF			0x0094
+#define MTK_MAC_BIT_MII_PAD_OUT_ENABLE		BIT(0)
+#define MTK_MAC_BIT_EXT_MDC_MODE		BIT(1)
+#define MTK_MAC_BIT_SWC_MII_MODE		BIT(2)
+
+/* MAC Clock Configuration Register */
+#define MTK_MAC_REG_MAC_CLK_CONF		0x00ac
+#define MTK_MAC_MSK_MAC_CLK_CONF		GENMASK(7, 0)
+#define MTK_MAC_BIT_CLK_DIV_10			0x0a
+
+/* Counter registers. */
+#define MTK_MAC_REG_C_RXOKPKT			0x0100
+#define MTK_MAC_REG_C_RXOKBYTE			0x0104
+#define MTK_MAC_REG_C_RXRUNT			0x0108
+#define MTK_MAC_REG_C_RXLONG			0x010c
+#define MTK_MAC_REG_C_RXDROP			0x0110
+#define MTK_MAC_REG_C_RXCRC			0x0114
+#define MTK_MAC_REG_C_RXARLDROP			0x0118
+#define MTK_MAC_REG_C_RXVLANDROP		0x011c
+#define MTK_MAC_REG_C_RXCSERR			0x0120
+#define MTK_MAC_REG_C_RXPAUSE			0x0124
+#define MTK_MAC_REG_C_TXOKPKT			0x0128
+#define MTK_MAC_REG_C_TXOKBYTE			0x012c
+#define MTK_MAC_REG_C_TXPAUSECOL		0x0130
+#define MTK_MAC_REG_C_TXRTY			0x0134
+#define MTK_MAC_REG_C_TXSKIP			0x0138
+#define MTK_MAC_REG_C_TX_ARP			0x013c
+#define MTK_MAC_REG_C_RX_RERR			0x01d8
+#define MTK_MAC_REG_C_RX_UNI			0x01dc
+#define MTK_MAC_REG_C_RX_MULTI			0x01e0
+#define MTK_MAC_REG_C_RX_BROAD			0x01e4
+#define MTK_MAC_REG_C_RX_ALIGNERR		0x01e8
+#define MTK_MAC_REG_C_TX_UNI			0x01ec
+#define MTK_MAC_REG_C_TX_MULTI			0x01f0
+#define MTK_MAC_REG_C_TX_BROAD			0x01f4
+#define MTK_MAC_REG_C_TX_TIMEOUT		0x01f8
+#define MTK_MAC_REG_C_TX_LATECOL		0x01fc
+#define MTK_MAC_REG_C_RX_LENGTHERR		0x0214
+#define MTK_MAC_REG_C_RX_TWIST			0x0218
+
+/* Ethernet CFG Control */
+#define MTK_PERICFG_REG_NIC_CFG_CON		0x03c4
+#define MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII	GENMASK(3, 0)
+#define MTK_PERICFG_BIT_NIC_CFG_CON_RMII	BIT(0)
+
+/* Represents the actual structure of descriptors used by the MAC. We can
+ * reuse the same structure for both TX and RX - the layout is the same, only
+ * the flags differ slightly.
+ */
+struct mtk_mac_ring_desc {
+	/* Contains both the status flags as well as packet length. */
+	u32 status;
+	u32 data_ptr;
+	u32 vtag;
+	u32 reserved;
+};
+
+#define MTK_MAC_DESC_MSK_LEN			GENMASK(15, 0)
+#define MTK_MAC_DESC_BIT_RX_CRCE		BIT(24)
+#define MTK_MAC_DESC_BIT_RX_OSIZE		BIT(25)
+#define MTK_MAC_DESC_BIT_INT			BIT(27)
+#define MTK_MAC_DESC_BIT_LS			BIT(28)
+#define MTK_MAC_DESC_BIT_FS			BIT(29)
+#define MTK_MAC_DESC_BIT_EOR			BIT(30)
+#define MTK_MAC_DESC_BIT_COWN			BIT(31)
+
+/* Helper structure for storing data read from/written to descriptors in order
+ * to limit reads from/writes to DMA memory.
+ */
+struct mtk_mac_ring_desc_data {
+	unsigned int len;
+	unsigned int flags;
+	dma_addr_t dma_addr;
+	struct sk_buff *skb;
+};
+
+#define MTK_MAC_RING_NUM_DESCS			128
+#define MTK_MAC_NUM_TX_DESCS			MTK_MAC_RING_NUM_DESCS
+#define MTK_MAC_NUM_RX_DESCS			MTK_MAC_RING_NUM_DESCS
+#define MTK_MAC_NUM_DESCS_TOTAL			(MTK_MAC_RING_NUM_DESCS * 2)
+#define MTK_MAC_DMA_SIZE \
+		(MTK_MAC_NUM_DESCS_TOTAL * sizeof(struct mtk_mac_ring_desc))
+
+struct mtk_mac_ring {
+	struct mtk_mac_ring_desc *descs;
+	struct sk_buff *skbs[MTK_MAC_RING_NUM_DESCS];
+	unsigned int head;
+	unsigned int tail;
+	unsigned int count;
+};
+
+struct mtk_mac_priv {
+	struct regmap *regs;
+	struct regmap *pericfg;
+
+	struct clk_bulk_data clks[MTK_MAC_NCLKS];
+
+	void *ring_base;
+	struct mtk_mac_ring_desc *descs_base;
+	dma_addr_t dma_addr;
+	struct mtk_mac_ring tx_ring;
+	struct mtk_mac_ring rx_ring;
+
+	struct mii_bus *mii;
+	struct napi_struct napi;
+
+	struct device_node *phy_node;
+	phy_interface_t phy_intf;
+	struct phy_device *phydev;
+	unsigned int link;
+	int speed;
+	int duplex;
+	int pause;
+
+	/* Protects against concurrent descriptor access. */
+	spinlock_t lock;
+	unsigned long lock_flags;
+
+	struct rtnl_link_stats64 stats;
+};
+
+static struct device *mtk_mac_get_dev(struct mtk_mac_priv *priv)
+{
+	struct net_device *ndev = priv_to_netdev(priv);
+
+	return ndev->dev.parent;
+}
+
+static const struct regmap_config mtk_mac_regmap_config = {
+	.reg_bits		= 32,
+	.val_bits		= 32,
+	.reg_stride		= 4,
+	.fast_io		= true,
+};
+
+static void mtk_mac_ring_init(struct mtk_mac_ring *ring,
+			      struct mtk_mac_ring_desc *descs,
+			      unsigned int start_count)
+{
+	memset(ring, 0, sizeof(*ring));
+	ring->descs = descs;
+	ring->head = 0;
+	ring->tail = 0;
+	ring->count = start_count;
+}
+
+static int mtk_mac_ring_pop_tail(struct mtk_mac_ring *ring,
+				 struct mtk_mac_ring_desc_data *desc_data)
+{
+	struct mtk_mac_ring_desc *desc = &ring->descs[ring->tail];
+	unsigned int status;
+
+	/* Let the device release the descriptor. */
+	dma_rmb();
+	status = desc->status;
+
+	if (!(status & MTK_MAC_DESC_BIT_COWN))
+		return -1;
+
+	desc_data->len = status & MTK_MAC_DESC_MSK_LEN;
+	desc_data->flags = status & ~MTK_MAC_DESC_MSK_LEN;
+	desc_data->dma_addr = desc->data_ptr;
+	desc_data->skb = ring->skbs[ring->tail];
+
+	desc->data_ptr = 0;
+	desc->status = MTK_MAC_DESC_BIT_COWN;
+	if (status & MTK_MAC_DESC_BIT_EOR)
+		desc->status |= MTK_MAC_DESC_BIT_EOR;
+
+	ring->tail = (ring->tail + 1) % MTK_MAC_RING_NUM_DESCS;
+	ring->count--;
+
+	return 0;
+}
+
+static void mtk_mac_ring_push_head(struct mtk_mac_ring *ring,
+				   struct mtk_mac_ring_desc_data *desc_data,
+				   unsigned int flags)
+{
+	struct mtk_mac_ring_desc *desc = &ring->descs[ring->head];
+	unsigned int status;
+
+	status = desc->status;
+
+	ring->skbs[ring->head] = desc_data->skb;
+	desc->data_ptr = desc_data->dma_addr;
+
+	status |= desc_data->len;
+	if (flags)
+		status |= flags;
+	desc->status = status;
+
+	/* Flush modifications before ownership change. */
+	dma_wmb();
+	desc->status &= ~MTK_MAC_DESC_BIT_COWN;
+
+	ring->head = (ring->head + 1) % MTK_MAC_RING_NUM_DESCS;
+	ring->count++;
+}
+
+static void mtk_mac_ring_push_head_rx(struct mtk_mac_ring *ring,
+				      struct mtk_mac_ring_desc_data *desc_data)
+{
+	mtk_mac_ring_push_head(ring, desc_data, 0);
+}
+
+static void mtk_mac_ring_push_head_tx(struct mtk_mac_ring *ring,
+				      struct mtk_mac_ring_desc_data *desc_data)
+{
+	static const unsigned int flags = MTK_MAC_DESC_BIT_FS |
+					  MTK_MAC_DESC_BIT_LS |
+					  MTK_MAC_DESC_BIT_INT;
+
+	mtk_mac_ring_push_head(ring, desc_data, flags);
+}
+
+static bool mtk_mac_ring_full(struct mtk_mac_ring *ring)
+{
+	return ring->count == MTK_MAC_RING_NUM_DESCS;
+}
+
+static bool mtk_mac_ring_descs_available(struct mtk_mac_ring *ring)
+{
+	return ring->count > 0;
+}
+
+static void mtk_mac_lock(struct mtk_mac_priv *priv)
+{
+	spin_lock_irqsave(&priv->lock, priv->lock_flags);
+}
+
+static void mtk_mac_unlock(struct mtk_mac_priv *priv)
+{
+	spin_unlock_irqrestore(&priv->lock, priv->lock_flags);
+}
+
+static dma_addr_t mtk_mac_dma_map_rx(struct mtk_mac_priv *priv,
+				     struct sk_buff *skb)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	/* Data pointer for the RX DMA descriptor must be aligned to 4N + 2. */
+	return dma_map_single(dev, skb_tail_pointer(skb) - 2,
+			      skb_tailroom(skb), DMA_FROM_DEVICE);
+}
+
+static void mtk_mac_dma_unmap_rx(struct mtk_mac_priv *priv,
+				 struct mtk_mac_ring_desc_data *desc_data)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	dma_unmap_single(dev, desc_data->dma_addr,
+			 skb_tailroom(desc_data->skb), DMA_FROM_DEVICE);
+}
+
+static dma_addr_t mtk_mac_dma_map_tx(struct mtk_mac_priv *priv,
+				     struct sk_buff *skb)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	return dma_map_single(dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE);
+}
+
+static void mtk_mac_dma_unmap_tx(struct mtk_mac_priv *priv,
+				 struct mtk_mac_ring_desc_data *desc_data)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	return dma_unmap_single(dev, desc_data->dma_addr,
+				desc_data->len, DMA_TO_DEVICE);
+}
+
+static void mtk_mac_nic_disable_pd(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_MAC_CFG,
+			   MTK_MAC_BIT_MAC_CFG_NIC_PD, 0);
+}
+
+static void mtk_mac_intr_unmask_all(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_INT_MASK, 0);
+}
+
+static void mtk_mac_intr_mask_all(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_INT_MASK, ~0);
+}
+
+static unsigned int mtk_mac_intr_read_and_clear(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	regmap_read(priv->regs, MTK_MAC_REG_INT_STS, &val);
+	regmap_write(priv->regs, MTK_MAC_REG_INT_STS, val);
+
+	return val;
+}
+
+static void mtk_mac_dma_init(struct mtk_mac_priv *priv)
+{
+	struct mtk_mac_ring_desc *desc;
+	unsigned int val;
+	int i;
+
+	priv->descs_base = (struct mtk_mac_ring_desc *)priv->ring_base;
+
+	for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++) {
+		desc = &priv->descs_base[i];
+
+		memset(desc, 0, sizeof(*desc));
+		desc->status = MTK_MAC_DESC_BIT_COWN;
+		if ((i == MTK_MAC_NUM_TX_DESCS - 1) ||
+		    (i == MTK_MAC_NUM_DESCS_TOTAL - 1))
+			desc->status |= MTK_MAC_DESC_BIT_EOR;
+	}
+
+	mtk_mac_ring_init(&priv->tx_ring, priv->descs_base, 0);
+	mtk_mac_ring_init(&priv->rx_ring,
+			  priv->descs_base + MTK_MAC_NUM_TX_DESCS,
+			  MTK_MAC_NUM_RX_DESCS);
+
+	/* Set DMA pointers. */
+	val = (unsigned int)priv->dma_addr;
+	regmap_write(priv->regs, MTK_MAC_REG_TX_BASE_ADDR, val);
+	regmap_write(priv->regs, MTK_MAC_REG_TX_DPTR, val);
+
+	val += sizeof(struct mtk_mac_ring_desc) * MTK_MAC_NUM_TX_DESCS;
+	regmap_write(priv->regs, MTK_MAC_REG_RX_BASE_ADDR, val);
+	regmap_write(priv->regs, MTK_MAC_REG_RX_DPTR, val);
+}
+
+static void mtk_mac_dma_start(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_TX_DMA_CTRL,
+			   MTK_MAC_BIT_TX_DMA_CTRL_START,
+			   MTK_MAC_BIT_TX_DMA_CTRL_START);
+	regmap_update_bits(priv->regs, MTK_MAC_REG_RX_DMA_CTRL,
+			   MTK_MAC_BIT_RX_DMA_CTRL_START,
+			   MTK_MAC_BIT_RX_DMA_CTRL_START);
+}
+
+static void mtk_mac_dma_stop(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_TX_DMA_CTRL,
+		     MTK_MAC_BIT_TX_DMA_CTRL_STOP);
+	regmap_write(priv->regs, MTK_MAC_REG_RX_DMA_CTRL,
+		     MTK_MAC_BIT_RX_DMA_CTRL_STOP);
+}
+
+static void mtk_mac_dma_disable(struct mtk_mac_priv *priv)
+{
+	int i;
+
+	mtk_mac_dma_stop(priv);
+
+	/* Take back all descriptors. */
+	for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++)
+		priv->descs_base[i].status |= MTK_MAC_DESC_BIT_COWN;
+}
+
+static void mtk_mac_dma_resume_rx(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_RX_DMA_CTRL,
+			   MTK_MAC_BIT_RX_DMA_CTRL_RESUME,
+			   MTK_MAC_BIT_RX_DMA_CTRL_RESUME);
+}
+
+static void mtk_mac_dma_resume_tx(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_TX_DMA_CTRL,
+			   MTK_MAC_BIT_TX_DMA_CTRL_RESUME,
+			   MTK_MAC_BIT_TX_DMA_CTRL_RESUME);
+}
+
+static void mtk_mac_set_mac_addr(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	u8 *mac_addr = ndev->dev_addr;
+	unsigned int high, low;
+
+	high = mac_addr[0] << 8 | mac_addr[1] << 0;
+	low = mac_addr[2] << 24 | mac_addr[3] << 16 |
+	      mac_addr[4] << 8 | mac_addr[5];
+
+	regmap_write(priv->regs, MTK_MAC_REG_MY_MAC_H, high);
+	regmap_write(priv->regs, MTK_MAC_REG_MY_MAC_L, low);
+}
+
+static void mtk_mac_reset_counters(struct mtk_mac_priv *priv)
+{
+	static const unsigned int counter_regs[] = {
+		MTK_MAC_REG_C_RXOKPKT,
+		MTK_MAC_REG_C_RXOKBYTE,
+		MTK_MAC_REG_C_RXRUNT,
+		MTK_MAC_REG_C_RXLONG,
+		MTK_MAC_REG_C_RXDROP,
+		MTK_MAC_REG_C_RXCRC,
+		MTK_MAC_REG_C_RXARLDROP,
+		MTK_MAC_REG_C_RXVLANDROP,
+		MTK_MAC_REG_C_RXCSERR,
+		MTK_MAC_REG_C_RXPAUSE,
+		MTK_MAC_REG_C_TXOKPKT,
+		MTK_MAC_REG_C_TXOKBYTE,
+		MTK_MAC_REG_C_TXPAUSECOL,
+		MTK_MAC_REG_C_TXRTY,
+		MTK_MAC_REG_C_TXSKIP,
+		MTK_MAC_REG_C_TX_ARP,
+		MTK_MAC_REG_C_RX_RERR,
+		MTK_MAC_REG_C_RX_UNI,
+		MTK_MAC_REG_C_RX_MULTI,
+		MTK_MAC_REG_C_RX_BROAD,
+		MTK_MAC_REG_C_RX_ALIGNERR,
+		MTK_MAC_REG_C_TX_UNI,
+		MTK_MAC_REG_C_TX_MULTI,
+		MTK_MAC_REG_C_TX_BROAD,
+		MTK_MAC_REG_C_TX_TIMEOUT,
+		MTK_MAC_REG_C_TX_LATECOL,
+		MTK_MAC_REG_C_RX_LENGTHERR,
+		MTK_MAC_REG_C_RX_TWIST,
+	};
+
+	unsigned int i, val;
+
+	for (i = 0; i < ARRAY_SIZE(counter_regs); i++)
+		regmap_read(priv->regs, counter_regs[i], &val);
+}
+
+static void mtk_mac_update_stat(struct mtk_mac_priv *priv,
+				unsigned int reg, u64 *stat)
+{
+	unsigned int val;
+
+	regmap_read(priv->regs, reg, &val);
+	*stat += val;
+}
+
+/* Try to get as many stats as possible from the internal registers instead
+ * of tracking them ourselves.
+ */
+static void mtk_mac_update_stats(struct mtk_mac_priv *priv)
+{
+	struct rtnl_link_stats64 *stats = &priv->stats;
+
+	/* OK packets and bytes. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXOKPKT, &stats->rx_packets);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TXOKPKT, &stats->tx_packets);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXOKBYTE, &stats->rx_bytes);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TXOKBYTE, &stats->tx_bytes);
+
+	/* RX & TX multicast. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_MULTI, &stats->multicast);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TX_MULTI, &stats->multicast);
+
+	/* Collisions. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TXPAUSECOL, &stats->collisions);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TX_LATECOL, &stats->collisions);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXRUNT, &stats->collisions);
+
+	/* RX Errors. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_LENGTHERR,
+			    &stats->rx_length_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXLONG, &stats->rx_over_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXCRC, &stats->rx_crc_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_ALIGNERR,
+			    &stats->rx_frame_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXDROP, &stats->rx_fifo_errors);
+	/* Sum of the general RX error counter + all of the above. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_RERR, &stats->rx_errors);
+	stats->rx_errors += stats->rx_length_errors;
+	stats->rx_errors += stats->rx_over_errors;
+	stats->rx_errors += stats->rx_crc_errors;
+	stats->rx_errors += stats->rx_frame_errors;
+	stats->rx_errors += stats->rx_fifo_errors;
+}
+
+static struct sk_buff *mtk_mac_alloc_skb(struct net_device *ndev)
+{
+	uintptr_t tail, offset;
+	struct sk_buff *skb;
+
+	skb = dev_alloc_skb(MTK_MAC_MAX_FRAME_SIZE);
+	if (!skb)
+		return NULL;
+
+	/* Align to 16 bytes. */
+	tail = (uintptr_t)skb_tail_pointer(skb);
+	if (tail & (MTK_MAC_SKB_ALIGNMENT - 1)) {
+		offset = tail & (MTK_MAC_SKB_ALIGNMENT - 1);
+		skb_reserve(skb, MTK_MAC_SKB_ALIGNMENT - offset);
+	}
+
+	/* Ensure 16-byte alignment of the skb pointer: eth_type_trans() will
+	 * extract the Ethernet header (14 bytes) so we need two more bytes.
+	 */
+	skb_reserve(skb, NET_IP_ALIGN);
+
+	return skb;
+}
+
+static int mtk_mac_prepare_rx_skbs(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->rx_ring;
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct mtk_mac_ring_desc *desc;
+	struct sk_buff *skb;
+	dma_addr_t dma_addr;
+	int i;
+
+	for (i = 0; i < MTK_MAC_NUM_RX_DESCS; i++) {
+		skb = mtk_mac_alloc_skb(ndev);
+		if (!skb)
+			return -ENOMEM;
+
+		dma_addr = mtk_mac_dma_map_rx(priv, skb);
+		if (dma_mapping_error(dev, dma_addr)) {
+			dev_kfree_skb(skb);
+			return -ENOMEM;
+		}
+
+		desc = &ring->descs[i];
+		desc->data_ptr = dma_addr;
+		desc->status |= skb_tailroom(skb) & MTK_MAC_DESC_MSK_LEN;
+		desc->status &= ~MTK_MAC_DESC_BIT_COWN;
+		ring->skbs[i] = skb;
+	}
+
+	ring->count = MTK_MAC_NUM_RX_DESCS;
+
+	return 0;
+}
+
+/* All processing for TX and RX happens in the napi poll callback. */
+static irqreturn_t mtk_mac_handle_irq(int irq, void *data)
+{
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+
+	ndev = data;
+	priv = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		mtk_mac_intr_mask_all(priv);
+		napi_schedule(&priv->napi);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void mtk_mac_free_rx_skbs(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->rx_ring;
+	struct mtk_mac_ring_desc_data desc_data;
+	struct mtk_mac_ring_desc *desc;
+	int i;
+
+	for (i = 0; i < MTK_MAC_NUM_RX_DESCS; i++) {
+		desc = &ring->descs[i];
+
+		if (!desc->data_ptr)
+			continue;
+
+		desc_data.dma_addr = desc->data_ptr;
+		desc_data.skb = ring->skbs[i];
+
+		mtk_mac_dma_unmap_rx(priv, &desc_data);
+		dev_kfree_skb(desc_data.skb);
+	}
+}
+
+static void mtk_mac_free_tx_skbs(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	struct mtk_mac_ring_desc_data desc_data;
+	struct mtk_mac_ring_desc *desc;
+	int i;
+
+	for (i = 0; i < MTK_MAC_NUM_TX_DESCS; i++) {
+		desc = &ring->descs[i];
+
+		if (!desc->data_ptr)
+			continue;
+
+		desc_data.dma_addr = desc->data_ptr;
+		desc_data.len = desc->status & MTK_MAC_DESC_MSK_LEN;
+		desc_data.skb = ring->skbs[i];
+
+		mtk_mac_dma_unmap_tx(priv, &desc_data);
+		dev_kfree_skb(desc_data.skb);
+	}
+}
+
+/* Wait for the completion of any previous command - CMD_START bit must be
+ * cleared by hardware.
+ */
+static int mtk_mac_hash_wait_cmd_start(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout_atomic(priv->regs,
+				MTK_MAC_REG_HASH_CTRL, val,
+				!(val & MTK_MAC_BIT_HASH_CTRL_CMD_START),
+				10, MTK_MAC_WAIT_TIMEOUT);
+}
+
+static int mtk_mac_hash_wait_ok(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+	int ret;
+
+	/* Wait for BIST_DONE bit. */
+	ret = regmap_read_poll_timeout_atomic(priv->regs,
+					MTK_MAC_REG_HASH_CTRL, val,
+					val & MTK_MAC_BIT_HASH_CTRL_BIST_DONE,
+					10, MTK_MAC_WAIT_TIMEOUT);
+	if (ret)
+		return ret;
+
+	/* Check the BIST_OK bit. */
+	regmap_read(priv->regs, MTK_MAC_REG_HASH_CTRL, &val);
+	if (!(val & MTK_MAC_BIT_HASH_CTRL_BIST_OK))
+		return -EIO;
+
+	return 0;
+}
+
+static int mtk_mac_set_hashbit(struct mtk_mac_priv *priv,
+			       unsigned int hash_addr)
+{
+	unsigned int val;
+	int ret;
+
+	ret = mtk_mac_hash_wait_cmd_start(priv);
+	if (ret)
+		return ret;
+
+	val = hash_addr & MTK_MAC_MSK_HASH_CTRL_HASH_BIT_ADDR;
+	val |= MTK_MAC_BIT_HASH_CTRL_ACC_CMD;
+	val |= MTK_MAC_BIT_HASH_CTRL_CMD_START;
+	val |= MTK_MAC_BIT_HASH_CTRL_BIST_EN;
+	val |= MTK_MAC_BIT_HASH_CTRL_HASH_BIT_DATA;
+	regmap_write(priv->regs, MTK_MAC_REG_HASH_CTRL, val);
+
+	return mtk_mac_hash_wait_ok(priv);
+}
+
+static int mtk_mac_reset_hash_table(struct mtk_mac_priv *priv)
+{
+	int ret;
+
+	ret = mtk_mac_hash_wait_cmd_start(priv);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(priv->regs, MTK_MAC_REG_HASH_CTRL,
+			   MTK_MAC_BIT_HASH_CTRL_BIST_EN,
+			   MTK_MAC_BIT_HASH_CTRL_BIST_EN);
+	regmap_update_bits(priv->regs, MTK_MAC_REG_TEST1,
+			   MTK_MAC_BIT_TEST1_RST_HASH_MBIST,
+			   MTK_MAC_BIT_TEST1_RST_HASH_MBIST);
+
+	return mtk_mac_hash_wait_ok(priv);
+}
+
+static void mtk_mac_phy_config(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	if (priv->speed == SPEED_1000)
+		val = MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_1000M;
+	else if (priv->speed == SPEED_100)
+		val = MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_100M;
+	else
+		val = MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_10M;
+	val <<= MTK_MAC_OFF_PHY_CTRL1_FORCE_SPD;
+
+	val |= MTK_MAC_BIT_PHY_CTRL1_AN_EN;
+	val |= MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_RX;
+	val |= MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_TX;
+	/* Only full-duplex supported for now. */
+	val |= MTK_MAC_BIT_PHY_CTRL1_FORCE_DPX;
+
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL1, val);
+
+	if (priv->pause) {
+		val = MTK_MAC_VAL_FC_CFG_SEND_PAUSE_TH_2K;
+		val <<= MTK_MAC_OFF_FC_CFG_SEND_PAUSE_TH;
+		val |= MTK_MAC_BIT_FC_CFG_UC_PAUSE_DIR;
+	} else {
+		val = 0;
+	}
+
+	regmap_update_bits(priv->regs, MTK_MAC_REG_FC_CFG,
+			   MTK_MAC_MSK_FC_CFG_SEND_PAUSE_TH |
+			   MTK_MAC_BIT_FC_CFG_UC_PAUSE_DIR, val);
+
+	if (priv->pause) {
+		val = MTK_MAC_VAL_EXT_CFG_SND_PAUSE_RLS_1K;
+		val <<= MTK_MAC_OFF_EXT_CFG_SND_PAUSE_RLS;
+	} else {
+		val = 0;
+	}
+
+	regmap_update_bits(priv->regs, MTK_MAC_REG_EXT_CFG,
+			   MTK_MAC_MSK_EXT_CFG_SND_PAUSE_RLS, val);
+}
+
+static void mtk_mac_adjust_link(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct phy_device *phydev = priv->phydev;
+	bool new_state = false;
+
+	if (phydev->link) {
+		if (!priv->link) {
+			priv->link = phydev->link;
+			new_state = true;
+		}
+
+		if (priv->speed != phydev->speed) {
+			priv->speed = phydev->speed;
+			new_state = true;
+		}
+
+		if (priv->pause != phydev->pause) {
+			priv->pause = phydev->pause;
+			new_state = true;
+		}
+	} else {
+		if (priv->link) {
+			priv->link = phydev->link;
+			new_state = true;
+		}
+	}
+
+	if (new_state) {
+		if (phydev->link)
+			mtk_mac_phy_config(priv);
+		phy_print_status(ndev->phydev);
+	}
+}
+
+static void mtk_mac_init_config(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	val = (MTK_MAC_BIT_MII_PAD_OUT_ENABLE |
+	       MTK_MAC_BIT_EXT_MDC_MODE |
+	       MTK_MAC_BIT_SWC_MII_MODE);
+
+	regmap_write(priv->regs, MTK_MAC_REG_SYS_CONF, val);
+	regmap_update_bits(priv->regs, MTK_MAC_REG_MAC_CLK_CONF,
+			   MTK_MAC_MSK_MAC_CLK_CONF,
+			   MTK_MAC_BIT_CLK_DIV_10);
+}
+
+static void mtk_mac_set_mode_rmii(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG_CON,
+			   MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII,
+			   MTK_PERICFG_BIT_NIC_CFG_CON_RMII);
+}
+
+static int mtk_mac_enable(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	unsigned int val;
+	int ret;
+
+	mtk_mac_nic_disable_pd(priv);
+	mtk_mac_intr_mask_all(priv);
+	mtk_mac_dma_stop(priv);
+
+	mtk_mac_set_mac_addr(ndev);
+
+	/* Configure the MAC */
+	val = MTK_MAC_VAL_MAC_CFG_IPG_96BIT;
+	val <<= MTK_MAC_OFF_MAC_CFG_IPG;
+	val |= MTK_MAC_BIT_MAC_CFG_MAXLEN_1522;
+	val |= MTK_MAC_BIT_MAC_CFG_AUTO_PAD;
+	val |= MTK_MAC_BIT_MAC_CFG_CRC_STRIP;
+	regmap_write(priv->regs, MTK_MAC_REG_MAC_CFG, val);
+
+	/* Enable Hash Table BIST and reset it */
+	ret = mtk_mac_reset_hash_table(priv);
+	if (ret)
+		return ret;
+
+	/* Setup the hashing algorithm */
+	regmap_update_bits(priv->regs, MTK_MAC_REG_ARL_CFG,
+			   MTK_MAC_BIT_ARL_CFG_HASH_ALG |
+			   MTK_MAC_BIT_ARL_CFG_MISC_MODE, 0);
+
+	/* Don't strip VLAN tags */
+	regmap_update_bits(priv->regs, MTK_MAC_REG_MAC_CFG,
+			   MTK_MAC_BIT_MAC_CFG_VLAN_STRIP, 0);
+
+	/* Setup DMA */
+	mtk_mac_dma_init(priv);
+
+	ret = mtk_mac_prepare_rx_skbs(ndev);
+	if (ret)
+		goto err_out;
+
+	/* Request the interrupt */
+	ret = request_irq(ndev->irq, mtk_mac_handle_irq,
+			  IRQF_TRIGGER_FALLING, ndev->name, ndev);
+	if (ret)
+		goto err_free_skbs;
+
+	napi_enable(&priv->napi);
+
+	mtk_mac_intr_read_and_clear(priv);
+	mtk_mac_intr_unmask_all(priv);
+
+	/* Connect to and start PHY */
+	priv->phydev = of_phy_connect(ndev, priv->phy_node,
+				      mtk_mac_adjust_link, 0, priv->phy_intf);
+	if (!priv->phydev) {
+		netdev_err(ndev, "failed to connect to PHY\n");
+		goto err_free_irq;
+	}
+
+	mtk_mac_dma_start(priv);
+	phy_start(priv->phydev);
+	netif_start_queue(ndev);
+
+	return 0;
+
+err_free_irq:
+	free_irq(ndev->irq, ndev);
+err_free_skbs:
+	mtk_mac_free_rx_skbs(ndev);
+err_out:
+	return ret;
+}
+
+static void mtk_mac_disable(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	napi_disable(&priv->napi);
+	mtk_mac_intr_mask_all(priv);
+	mtk_mac_dma_disable(priv);
+	mtk_mac_intr_read_and_clear(priv);
+	phy_stop(priv->phydev);
+	phy_disconnect(priv->phydev);
+	free_irq(ndev->irq, ndev);
+	mtk_mac_free_rx_skbs(ndev);
+	mtk_mac_free_tx_skbs(ndev);
+}
+
+static int mtk_mac_netdev_open(struct net_device *ndev)
+{
+	return mtk_mac_enable(ndev);
+}
+
+static int mtk_mac_netdev_stop(struct net_device *ndev)
+{
+	mtk_mac_disable(ndev);
+
+	return 0;
+}
+
+static int mtk_mac_netdev_ioctl(struct net_device *ndev,
+				struct ifreq *req, int cmd)
+{
+	if (!netif_running(ndev))
+		return -EINVAL;
+
+	return phy_mii_ioctl(ndev->phydev, req, cmd);
+}
+
+static int mtk_mac_netdev_start_xmit(struct sk_buff *skb,
+				     struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct mtk_mac_ring_desc_data desc_data;
+
+	desc_data.dma_addr = mtk_mac_dma_map_tx(priv, skb);
+	if (dma_mapping_error(dev, desc_data.dma_addr))
+		goto err_drop_packet;
+
+	desc_data.skb = skb;
+	desc_data.len = skb->len;
+
+	mtk_mac_lock(priv);
+	mtk_mac_ring_push_head_tx(ring, &desc_data);
+
+	if (mtk_mac_ring_full(ring))
+		netif_stop_queue(ndev);
+	mtk_mac_unlock(priv);
+
+	mtk_mac_dma_resume_tx(priv);
+
+	return NETDEV_TX_OK;
+
+err_drop_packet:
+	dev_kfree_skb(skb);
+	ndev->stats.tx_dropped++;
+	return NETDEV_TX_BUSY;
+}
+
+static int mtk_mac_tx_complete_one(struct mtk_mac_priv *priv)
+{
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	struct mtk_mac_ring_desc_data desc_data;
+	int ret;
+
+	ret = mtk_mac_ring_pop_tail(ring, &desc_data);
+	if (ret)
+		return ret;
+
+	mtk_mac_dma_unmap_tx(priv, &desc_data);
+	dev_kfree_skb_irq(desc_data.skb);
+
+	return 0;
+}
+
+static void mtk_mac_tx_complete_all(struct mtk_mac_priv *priv)
+{
+	struct net_device *ndev = priv_to_netdev(priv);
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	int ret;
+
+	for (;;) {
+		mtk_mac_lock(priv);
+
+		if (!mtk_mac_ring_descs_available(ring)) {
+			mtk_mac_unlock(priv);
+			break;
+		}
+
+		ret = mtk_mac_tx_complete_one(priv);
+		if (ret) {
+			mtk_mac_unlock(priv);
+			break;
+		}
+
+		if (netif_queue_stopped(ndev))
+			netif_wake_queue(ndev);
+
+		mtk_mac_unlock(priv);
+	}
+}
+
+static void mtk_mac_netdev_get_stats64(struct net_device *ndev,
+				       struct rtnl_link_stats64 *stats)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+
+	mtk_mac_update_stats(priv);
+
+	memcpy(stats, &priv->stats, sizeof(*stats));
+}
+
+static void mtk_mac_set_rx_mode(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct netdev_hw_addr *hw_addr;
+	unsigned int hash_addr, i;
+	int ret;
+
+	if (ndev->flags & IFF_PROMISC) {
+		regmap_update_bits(priv->regs, MTK_MAC_REG_ARL_CFG,
+				   MTK_MAC_BIT_ARL_CFG_MISC_MODE,
+				   MTK_MAC_BIT_ARL_CFG_MISC_MODE);
+	} else if (netdev_mc_count(ndev) > MTK_MAC_HASHTABLE_MC_LIMIT ||
+		   ndev->flags & IFF_ALLMULTI) {
+		for (i = 0; i < MTK_MAC_HASHTABLE_SIZE_MAX; i++) {
+			ret = mtk_mac_set_hashbit(priv, i);
+			if (ret)
+				goto hash_fail;
+		}
+	} else {
+		/* Clear previous settings. */
+		ret = mtk_mac_reset_hash_table(priv);
+		if (ret)
+			goto hash_fail;
+
+		netdev_for_each_mc_addr(hw_addr, ndev) {
+			hash_addr = (hw_addr->addr[0] & 0x01) << 8;
+			hash_addr += hw_addr->addr[5];
+			ret = mtk_mac_set_hashbit(priv, hash_addr);
+			if (ret)
+				goto hash_fail;
+		}
+	}
+
+	return;
+
+hash_fail:
+	if (ret == -ETIMEDOUT)
+		netdev_err(ndev, "setting hash bit timed out\n");
+	else
+		/* Should be -EIO */
+		netdev_err(ndev, "unable to set hash bit");
+}
+
+static const struct net_device_ops mtk_mac_netdev_ops = {
+	.ndo_open		= mtk_mac_netdev_open,
+	.ndo_stop		= mtk_mac_netdev_stop,
+	.ndo_start_xmit		= mtk_mac_netdev_start_xmit,
+	.ndo_get_stats64	= mtk_mac_netdev_get_stats64,
+	.ndo_set_rx_mode	= mtk_mac_set_rx_mode,
+	.ndo_do_ioctl		= mtk_mac_netdev_ioctl,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static void mtk_mac_get_drvinfo(struct net_device *dev,
+				struct ethtool_drvinfo *info)
+{
+	strlcpy(info->driver, MTK_MAC_DRVNAME, sizeof(info->driver));
+}
+
+/* TODO Add ethtool stats. */
+static const struct ethtool_ops mtk_mac_ethtool_ops = {
+	.get_drvinfo		= mtk_mac_get_drvinfo,
+	.get_link		= ethtool_op_get_link,
+	.get_link_ksettings	= phy_ethtool_get_link_ksettings,
+	.set_link_ksettings	= phy_ethtool_set_link_ksettings,
+};
+
+static int mtk_mac_receive_packet(struct mtk_mac_priv *priv)
+{
+	struct net_device *ndev = priv_to_netdev(priv);
+	struct mtk_mac_ring *ring = &priv->rx_ring;
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct mtk_mac_ring_desc_data desc_data;
+	struct sk_buff *curr_skb, *new_skb;
+	dma_addr_t new_dma_addr;
+	int ret;
+
+	mtk_mac_lock(priv);
+	ret = mtk_mac_ring_pop_tail(ring, &desc_data);
+	mtk_mac_unlock(priv);
+	if (ret)
+		return -1;
+
+	curr_skb = desc_data.skb;
+
+	if ((desc_data.flags & MTK_MAC_DESC_BIT_RX_CRCE) ||
+	    (desc_data.flags & MTK_MAC_DESC_BIT_RX_OSIZE)) {
+		/* Error packet -> drop and reuse skb. */
+		new_skb = curr_skb;
+		goto push_new_skb;
+	}
+
+	/* Prepare new skb before receiving the current one. Reuse the current
+	 * skb if we fail at any point.
+	 */
+	new_skb = mtk_mac_alloc_skb(ndev);
+	if (!new_skb) {
+		ndev->stats.rx_dropped++;
+		new_skb = curr_skb;
+		goto push_new_skb;
+	}
+
+	new_dma_addr = mtk_mac_dma_map_rx(priv, new_skb);
+	if (dma_mapping_error(dev, new_dma_addr)) {
+		ndev->stats.rx_dropped++;
+		dev_kfree_skb(new_skb);
+		new_skb = curr_skb;
+		netdev_err(ndev, "DMA mapping error of RX descriptor\n");
+		goto push_new_skb;
+	}
+
+	/* We can't fail anymore at this point: it's safe to unmap the skb. */
+	mtk_mac_dma_unmap_rx(priv, &desc_data);
+
+	skb_put(desc_data.skb, desc_data.len);
+	desc_data.skb->ip_summed = CHECKSUM_NONE;
+	desc_data.skb->protocol = eth_type_trans(desc_data.skb, ndev);
+	desc_data.skb->dev = ndev;
+	netif_receive_skb(desc_data.skb);
+
+push_new_skb:
+	desc_data.dma_addr = new_dma_addr;
+	desc_data.len = skb_tailroom(new_skb);
+	desc_data.skb = new_skb;
+
+	mtk_mac_lock(priv);
+	mtk_mac_ring_push_head_rx(ring, &desc_data);
+	mtk_mac_unlock(priv);
+
+	return 0;
+}
+
+static int mtk_mac_process_rx(struct mtk_mac_priv *priv, int budget)
+{
+	int received, ret;
+
+	for (received = 0, ret = 0; received < budget && ret == 0; received++)
+		ret = mtk_mac_receive_packet(priv);
+
+	mtk_mac_dma_resume_rx(priv);
+
+	return received;
+}
+
+static int mtk_mac_poll(struct napi_struct *napi, int budget)
+{
+	struct mtk_mac_priv *priv;
+	unsigned int status;
+	int received = 0;
+
+	priv = container_of(napi, struct mtk_mac_priv, napi);
+
+	status = mtk_mac_intr_read_and_clear(priv);
+
+	/* Clean up TX */
+	if (status & MTK_MAC_BIT_INT_STS_TNTC)
+		mtk_mac_tx_complete_all(priv);
+
+	/* Receive up to $budget packets */
+	if (status & MTK_MAC_BIT_INT_STS_FNRC)
+		received = mtk_mac_process_rx(priv, budget);
+
+	/* One of the counter reached 0x8000000 */
+	if (status & MTK_MAC_REG_INT_STS_MIB_CNT_TH) {
+		mtk_mac_update_stats(priv);
+		mtk_mac_reset_counters(priv);
+	}
+
+	if (received < budget)
+		napi_complete_done(napi, received);
+
+	mtk_mac_intr_unmask_all(priv);
+
+	return received;
+}
+
+static void mtk_mac_mdio_rwok_clear(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL0,
+		     MTK_MAC_BIT_PHY_CTRL0_RWOK);
+}
+
+static int mtk_mac_mdio_rwok_wait(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(priv->regs, MTK_MAC_REG_PHY_CTRL0,
+					val, val & MTK_MAC_BIT_PHY_CTRL0_RWOK,
+					10, MTK_MAC_WAIT_TIMEOUT);
+}
+
+static int mtk_mac_mdio_read(struct mii_bus *mii, int phy_id, int regnum)
+{
+	struct mtk_mac_priv *priv = mii->priv;
+	unsigned int val, data;
+	int ret;
+
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	mtk_mac_mdio_rwok_clear(priv);
+
+	val = (regnum << MTK_MAC_OFF_PHY_CTRL0_PREG);
+	val &= MTK_MAC_MSK_PHY_CTRL0_PREG;
+	val |= MTK_MAC_BIT_PHY_CTRL0_RDCMD;
+
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL0, val);
+
+	ret = mtk_mac_mdio_rwok_wait(priv);
+	if (ret)
+		return ret;
+
+	regmap_read(priv->regs, MTK_MAC_REG_PHY_CTRL0, &data);
+
+	data &= MTK_MAC_MSK_PHY_CTRL0_RWDATA;
+	data >>= MTK_MAC_OFF_PHY_CTRL0_RWDATA;
+
+	return data;
+}
+
+static int mtk_mac_mdio_write(struct mii_bus *mii, int phy_id,
+			      int regnum, u16 data)
+{
+	struct mtk_mac_priv *priv = mii->priv;
+	unsigned int val;
+
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	mtk_mac_mdio_rwok_clear(priv);
+
+	val = data;
+	val <<= MTK_MAC_OFF_PHY_CTRL0_RWDATA;
+	val &= MTK_MAC_MSK_PHY_CTRL0_RWDATA;
+	regnum <<= MTK_MAC_OFF_PHY_CTRL0_PREG;
+	regnum &= MTK_MAC_MSK_PHY_CTRL0_PREG;
+	val |= regnum;
+	val |= MTK_MAC_BIT_PHY_CTRL0_WTCMD;
+
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL0, val);
+
+	return mtk_mac_mdio_rwok_wait(priv);
+}
+
+static int mtk_mac_mdio_init(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct device_node *of_node, *mdio_node;
+	int ret;
+
+	of_node = dev->of_node;
+
+	mdio_node = of_get_child_by_name(of_node, "mdio");
+	if (!mdio_node)
+		return -ENODEV;
+
+	if (!of_device_is_available(mdio_node)) {
+		ret = -ENODEV;
+		goto out_put_node;
+	}
+
+	priv->mii = devm_mdiobus_alloc(dev);
+	if (!priv->mii) {
+		ret = -ENOMEM;
+		goto out_put_node;
+	}
+
+	snprintf(priv->mii->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
+	priv->mii->name = "mtk-mac-mdio";
+	priv->mii->parent = dev;
+	priv->mii->read = mtk_mac_mdio_read;
+	priv->mii->write = mtk_mac_mdio_write;
+	priv->mii->priv = priv;
+
+	ret = of_mdiobus_register(priv->mii, mdio_node);
+
+out_put_node:
+	of_node_put(mdio_node);
+	return ret;
+}
+
+static int mtk_mac_suspend(struct device *dev)
+{
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+
+	ndev = dev_get_drvdata(dev);
+	priv = netdev_priv(ndev);
+
+	mtk_mac_disable(ndev);
+	clk_bulk_disable_unprepare(MTK_MAC_NCLKS, priv->clks);
+
+	return 0;
+}
+
+static int mtk_mac_resume(struct device *dev)
+{
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+	int ret;
+
+	ndev = dev_get_drvdata(dev);
+	priv = netdev_priv(ndev);
+
+	ret = clk_bulk_prepare_enable(MTK_MAC_NCLKS, priv->clks);
+	if (ret)
+		return ret;
+
+	ret = mtk_mac_enable(ndev);
+	if (ret)
+		clk_bulk_disable_unprepare(MTK_MAC_NCLKS, priv->clks);
+
+	return ret;
+}
+
+static void mtk_mac_clk_disable_unprepare(void *data)
+{
+	struct mtk_mac_priv *priv = data;
+
+	clk_bulk_disable_unprepare(MTK_MAC_NCLKS, priv->clks);
+}
+
+static int mtk_mac_probe(struct platform_device *pdev)
+{
+	struct device_node *of_node;
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+	struct device *dev;
+	void __iomem *base;
+	int ret, i;
+
+	dev = &pdev->dev;
+	of_node = dev->of_node;
+
+	ndev = devm_alloc_etherdev(dev, sizeof(*priv));
+	if (!ndev)
+		return -ENOMEM;
+
+	priv = netdev_priv(ndev);
+	SET_NETDEV_DEV(ndev, dev);
+	platform_set_drvdata(pdev, ndev);
+
+	ndev->min_mtu = ETH_ZLEN;
+	ndev->max_mtu = MTK_MAC_MAX_FRAME_SIZE;
+
+	spin_lock_init(&priv->lock);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* We won't be checking the return values of regmap read & write
+	 * functions. They can only fail for mmio if there's a clock attached
+	 * to regmap which is not the case here.
+	 */
+	priv->regs = devm_regmap_init_mmio(dev, base,
+					   &mtk_mac_regmap_config);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	priv->pericfg = syscon_regmap_lookup_by_phandle(of_node,
+							"mediatek,pericfg");
+	if (IS_ERR(priv->pericfg)) {
+		dev_err(dev, "Failed to lookup the PERICFG syscon\n");
+		return PTR_ERR(priv->pericfg);
+	}
+
+	ndev->irq = platform_get_irq(pdev, 0);
+	if (ndev->irq < 0)
+		return ndev->irq;
+
+	for (i = 0; i < MTK_MAC_NCLKS; i++)
+		priv->clks[i].id = mtk_mac_clk_names[i];
+	ret = devm_clk_bulk_get(dev, MTK_MAC_NCLKS, priv->clks);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(MTK_MAC_NCLKS, priv->clks);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev,
+				       mtk_mac_clk_disable_unprepare, priv);
+	if (ret)
+		return ret;
+
+	ret = of_get_phy_mode(of_node, &priv->phy_intf);
+	if (ret) {
+		return ret;
+	} else if (priv->phy_intf != PHY_INTERFACE_MODE_RMII) {
+		dev_err(dev, "unsupported phy mode: %s\n",
+			phy_modes(priv->phy_intf));
+		return -EINVAL;
+	}
+
+	priv->phy_node = of_parse_phandle(of_node, "phy-handle", 0);
+	if (!priv->phy_node) {
+		dev_err(dev, "failed to retrieve the phy handle from device tree\n");
+		return -ENODEV;
+	}
+
+	mtk_mac_set_mode_rmii(priv);
+
+	dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	priv->ring_base = dmam_alloc_coherent(dev, MTK_MAC_DMA_SIZE,
+					      &priv->dma_addr,
+					      GFP_KERNEL | GFP_DMA);
+	if (!priv->ring_base)
+		return -ENOMEM;
+
+	mtk_mac_nic_disable_pd(priv);
+	mtk_mac_init_config(priv);
+
+	ret = mtk_mac_mdio_init(ndev);
+	if (ret)
+		return ret;
+
+	ret = eth_platform_get_mac_address(dev, ndev->dev_addr);
+	if (ret || !is_valid_ether_addr(ndev->dev_addr))
+		eth_hw_addr_random(ndev);
+
+	ndev->netdev_ops = &mtk_mac_netdev_ops;
+	ndev->ethtool_ops = &mtk_mac_ethtool_ops;
+
+	netif_napi_add(ndev, &priv->napi, mtk_mac_poll, MTK_MAC_NAPI_WEIGHT);
+
+	return devm_register_netdev(dev, ndev);
+}
+
+static const struct of_device_id mtk_mac_of_match[] = {
+	{ .compatible = "mediatek,mt8516-eth", },
+	{ .compatible = "mediatek,mt8518-eth", },
+	{ .compatible = "mediatek,mt8175-eth", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mtk_mac_of_match);
+
+static SIMPLE_DEV_PM_OPS(mtk_mac_pm_ops,
+			 mtk_mac_suspend, mtk_mac_resume);
+
+static struct platform_driver mtk_mac_driver = {
+	.driver = {
+		.name = MTK_MAC_DRVNAME,
+		.pm = &mtk_mac_pm_ops,
+		.of_match_table = of_match_ptr(mtk_mac_of_match),
+	},
+	.probe = mtk_mac_probe,
+};
+module_platform_driver(mtk_mac_driver);
+
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_DESCRIPTION("Mediatek Ethernet MAC Driver");
+MODULE_LICENSE("GPL");
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 09/14] net: ethernet: mtk-eth-mac: new driver

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds the driver for the MediaTek Ethernet MAC used on the MT8* SoC
family. For now we only support full-duplex.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/ethernet/mediatek/Kconfig       |    6 +
 drivers/net/ethernet/mediatek/Makefile      |    1 +
 drivers/net/ethernet/mediatek/mtk_eth_mac.c | 1561 +++++++++++++++++++
 3 files changed, 1568 insertions(+)
 create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_mac.c

diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
index 5079b8090f16..5c3793076765 100644
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -14,4 +14,10 @@ config NET_MEDIATEK_SOC
 	  This driver supports the gigabit ethernet MACs in the
 	  MediaTek SoC family.
 
+config NET_MEDIATEK_MAC
+	tristate "MediaTek Ethernet MAC support"
+	select PHYLIB
+	help
+	  This driver supports the ethernet IP on MediaTek MT85** SoCs.
+
 endif #NET_VENDOR_MEDIATEK
diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile
index 3362fb7ef859..f7f5638943a0 100644
--- a/drivers/net/ethernet/mediatek/Makefile
+++ b/drivers/net/ethernet/mediatek/Makefile
@@ -5,3 +5,4 @@
 
 obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
 mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o
+obj-$(CONFIG_NET_MEDIATEK_MAC) += mtk_eth_mac.o
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_mac.c b/drivers/net/ethernet/mediatek/mtk_eth_mac.c
new file mode 100644
index 000000000000..fffaa452f55d
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/mtk_eth_mac.c
@@ -0,0 +1,1561 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 MediaTek Corporation
+ * Copyright (c) 2020 BayLibre SAS
+ *
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+
+#define MTK_MAC_DRVNAME				"mtk_eth_mac"
+
+#define MTK_MAC_WAIT_TIMEOUT			300
+#define MTK_MAC_MAX_FRAME_SIZE			1514
+#define MTK_MAC_SKB_ALIGNMENT			16
+#define MTK_MAC_NAPI_WEIGHT			64
+#define MTK_MAC_HASHTABLE_MC_LIMIT		256
+#define MTK_MAC_HASHTABLE_SIZE_MAX		512
+
+/* This is defined to 0 on arm64 in arch/arm64/include/asm/processor.h but
+ * this IP doesn't work without this alignment being equal to 2.
+ */
+#ifdef NET_IP_ALIGN
+#undef NET_IP_ALIGN
+#endif
+#define NET_IP_ALIGN				2
+
+static const char *const mtk_mac_clk_names[] = { "core", "reg", "trans" };
+#define MTK_MAC_NCLKS ARRAY_SIZE(mtk_mac_clk_names)
+
+/* PHY Control Register 0 */
+#define MTK_MAC_REG_PHY_CTRL0			0x0000
+#define MTK_MAC_BIT_PHY_CTRL0_WTCMD		BIT(13)
+#define MTK_MAC_BIT_PHY_CTRL0_RDCMD		BIT(14)
+#define MTK_MAC_BIT_PHY_CTRL0_RWOK		BIT(15)
+#define MTK_MAC_MSK_PHY_CTRL0_PREG		GENMASK(12, 8)
+#define MTK_MAC_OFF_PHY_CTRL0_PREG		8
+#define MTK_MAC_MSK_PHY_CTRL0_RWDATA		GENMASK(31, 16)
+#define MTK_MAC_OFF_PHY_CTRL0_RWDATA		16
+
+/* PHY Control Register 1 */
+#define MTK_MAC_REG_PHY_CTRL1			0x0004
+#define MTK_MAC_BIT_PHY_CTRL1_LINK_ST		BIT(0)
+#define MTK_MAC_BIT_PHY_CTRL1_AN_EN		BIT(8)
+#define MTK_MAC_OFF_PHY_CTRL1_FORCE_SPD		9
+#define MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_10M	0x00
+#define MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_100M	0x01
+#define MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_1000M	0x02
+#define MTK_MAC_BIT_PHY_CTRL1_FORCE_DPX		BIT(11)
+#define MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_RX	BIT(12)
+#define MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_TX	BIT(13)
+
+/* MAC Configuration Register */
+#define MTK_MAC_REG_MAC_CFG			0x0008
+#define MTK_MAC_OFF_MAC_CFG_IPG			10
+#define MTK_MAC_VAL_MAC_CFG_IPG_96BIT		GENMASK(4, 0)
+#define MTK_MAC_BIT_MAC_CFG_MAXLEN_1522		BIT(16)
+#define MTK_MAC_BIT_MAC_CFG_AUTO_PAD		BIT(19)
+#define MTK_MAC_BIT_MAC_CFG_CRC_STRIP		BIT(20)
+#define MTK_MAC_BIT_MAC_CFG_VLAN_STRIP		BIT(22)
+#define MTK_MAC_BIT_MAC_CFG_NIC_PD		BIT(31)
+
+/* Flow-Control Configuration Register */
+#define MTK_MAC_REG_FC_CFG			0x000c
+#define MTK_MAC_BIT_FC_CFG_BP_EN		BIT(7)
+#define MTK_MAC_BIT_FC_CFG_UC_PAUSE_DIR	BIT(8)
+#define MTK_MAC_OFF_FC_CFG_SEND_PAUSE_TH	16
+#define MTK_MAC_MSK_FC_CFG_SEND_PAUSE_TH	GENMASK(27, 16)
+#define MTK_MAC_VAL_FC_CFG_SEND_PAUSE_TH_2K	0x800
+
+/* ARL Configuration Register */
+#define MTK_MAC_REG_ARL_CFG			0x0010
+#define MTK_MAC_BIT_ARL_CFG_HASH_ALG		BIT(0)
+#define MTK_MAC_BIT_ARL_CFG_MISC_MODE		BIT(4)
+
+/* MAC High and Low Bytes Registers */
+#define MTK_MAC_REG_MY_MAC_H			0x0014
+#define MTK_MAC_REG_MY_MAC_L			0x0018
+
+/* Hash Table Control Register */
+#define MTK_MAC_REG_HASH_CTRL			0x001c
+#define MTK_MAC_MSK_HASH_CTRL_HASH_BIT_ADDR	GENMASK(8, 0)
+#define MTK_MAC_BIT_HASH_CTRL_HASH_BIT_DATA	BIT(12)
+#define MTK_MAC_BIT_HASH_CTRL_ACC_CMD		BIT(13)
+#define MTK_MAC_BIT_HASH_CTRL_CMD_START		BIT(14)
+#define MTK_MAC_BIT_HASH_CTRL_BIST_OK		BIT(16)
+#define MTK_MAC_BIT_HASH_CTRL_BIST_DONE		BIT(17)
+#define MTK_MAC_BIT_HASH_CTRL_BIST_EN		BIT(31)
+
+/* TX DMA Control Register */
+#define MTK_MAC_REG_TX_DMA_CTRL			0x0034
+#define MTK_MAC_BIT_TX_DMA_CTRL_START		BIT(0)
+#define MTK_MAC_BIT_TX_DMA_CTRL_STOP		BIT(1)
+#define MTK_MAC_BIT_TX_DMA_CTRL_RESUME		BIT(2)
+
+/* RX DMA Control Register */
+#define MTK_MAC_REG_RX_DMA_CTRL			0x0038
+#define MTK_MAC_BIT_RX_DMA_CTRL_START		BIT(0)
+#define MTK_MAC_BIT_RX_DMA_CTRL_STOP		BIT(1)
+#define MTK_MAC_BIT_RX_DMA_CTRL_RESUME		BIT(2)
+
+/* DMA Address Registers */
+#define MTK_MAC_REG_TX_DPTR			0x003c
+#define MTK_MAC_REG_RX_DPTR			0x0040
+#define MTK_MAC_REG_TX_BASE_ADDR		0x0044
+#define MTK_MAC_REG_RX_BASE_ADDR		0x0048
+
+/* Interrupt Status Register */
+#define MTK_MAC_REG_INT_STS			0x0050
+#define MTK_MAC_REG_INT_STS_PORT_STS_CHG	BIT(2)
+#define MTK_MAC_REG_INT_STS_MIB_CNT_TH		BIT(3)
+#define MTK_MAC_BIT_INT_STS_FNRC		BIT(6)
+#define MTK_MAC_BIT_INT_STS_TNTC		BIT(8)
+
+/* Interrupt Mask Register */
+#define MTK_MAC_REG_INT_MASK			0x0054
+#define MTK_MAC_BIT_INT_MASK_FNRC		BIT(6)
+
+/* Misc. Config Register */
+#define MTK_MAC_REG_TEST1			0x005c
+#define MTK_MAC_BIT_TEST1_RST_HASH_MBIST	BIT(31)
+
+/* Extended Configuration Register */
+#define MTK_MAC_REG_EXT_CFG			0x0060
+#define MTK_MAC_OFF_EXT_CFG_SND_PAUSE_RLS	16
+#define MTK_MAC_MSK_EXT_CFG_SND_PAUSE_RLS	GENMASK(26, 16)
+#define MTK_MAC_VAL_EXT_CFG_SND_PAUSE_RLS_1K	0x400
+
+/* EthSys Configuration Register */
+#define MTK_MAC_REG_SYS_CONF			0x0094
+#define MTK_MAC_BIT_MII_PAD_OUT_ENABLE		BIT(0)
+#define MTK_MAC_BIT_EXT_MDC_MODE		BIT(1)
+#define MTK_MAC_BIT_SWC_MII_MODE		BIT(2)
+
+/* MAC Clock Configuration Register */
+#define MTK_MAC_REG_MAC_CLK_CONF		0x00ac
+#define MTK_MAC_MSK_MAC_CLK_CONF		GENMASK(7, 0)
+#define MTK_MAC_BIT_CLK_DIV_10			0x0a
+
+/* Counter registers. */
+#define MTK_MAC_REG_C_RXOKPKT			0x0100
+#define MTK_MAC_REG_C_RXOKBYTE			0x0104
+#define MTK_MAC_REG_C_RXRUNT			0x0108
+#define MTK_MAC_REG_C_RXLONG			0x010c
+#define MTK_MAC_REG_C_RXDROP			0x0110
+#define MTK_MAC_REG_C_RXCRC			0x0114
+#define MTK_MAC_REG_C_RXARLDROP			0x0118
+#define MTK_MAC_REG_C_RXVLANDROP		0x011c
+#define MTK_MAC_REG_C_RXCSERR			0x0120
+#define MTK_MAC_REG_C_RXPAUSE			0x0124
+#define MTK_MAC_REG_C_TXOKPKT			0x0128
+#define MTK_MAC_REG_C_TXOKBYTE			0x012c
+#define MTK_MAC_REG_C_TXPAUSECOL		0x0130
+#define MTK_MAC_REG_C_TXRTY			0x0134
+#define MTK_MAC_REG_C_TXSKIP			0x0138
+#define MTK_MAC_REG_C_TX_ARP			0x013c
+#define MTK_MAC_REG_C_RX_RERR			0x01d8
+#define MTK_MAC_REG_C_RX_UNI			0x01dc
+#define MTK_MAC_REG_C_RX_MULTI			0x01e0
+#define MTK_MAC_REG_C_RX_BROAD			0x01e4
+#define MTK_MAC_REG_C_RX_ALIGNERR		0x01e8
+#define MTK_MAC_REG_C_TX_UNI			0x01ec
+#define MTK_MAC_REG_C_TX_MULTI			0x01f0
+#define MTK_MAC_REG_C_TX_BROAD			0x01f4
+#define MTK_MAC_REG_C_TX_TIMEOUT		0x01f8
+#define MTK_MAC_REG_C_TX_LATECOL		0x01fc
+#define MTK_MAC_REG_C_RX_LENGTHERR		0x0214
+#define MTK_MAC_REG_C_RX_TWIST			0x0218
+
+/* Ethernet CFG Control */
+#define MTK_PERICFG_REG_NIC_CFG_CON		0x03c4
+#define MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII	GENMASK(3, 0)
+#define MTK_PERICFG_BIT_NIC_CFG_CON_RMII	BIT(0)
+
+/* Represents the actual structure of descriptors used by the MAC. We can
+ * reuse the same structure for both TX and RX - the layout is the same, only
+ * the flags differ slightly.
+ */
+struct mtk_mac_ring_desc {
+	/* Contains both the status flags as well as packet length. */
+	u32 status;
+	u32 data_ptr;
+	u32 vtag;
+	u32 reserved;
+};
+
+#define MTK_MAC_DESC_MSK_LEN			GENMASK(15, 0)
+#define MTK_MAC_DESC_BIT_RX_CRCE		BIT(24)
+#define MTK_MAC_DESC_BIT_RX_OSIZE		BIT(25)
+#define MTK_MAC_DESC_BIT_INT			BIT(27)
+#define MTK_MAC_DESC_BIT_LS			BIT(28)
+#define MTK_MAC_DESC_BIT_FS			BIT(29)
+#define MTK_MAC_DESC_BIT_EOR			BIT(30)
+#define MTK_MAC_DESC_BIT_COWN			BIT(31)
+
+/* Helper structure for storing data read from/written to descriptors in order
+ * to limit reads from/writes to DMA memory.
+ */
+struct mtk_mac_ring_desc_data {
+	unsigned int len;
+	unsigned int flags;
+	dma_addr_t dma_addr;
+	struct sk_buff *skb;
+};
+
+#define MTK_MAC_RING_NUM_DESCS			128
+#define MTK_MAC_NUM_TX_DESCS			MTK_MAC_RING_NUM_DESCS
+#define MTK_MAC_NUM_RX_DESCS			MTK_MAC_RING_NUM_DESCS
+#define MTK_MAC_NUM_DESCS_TOTAL			(MTK_MAC_RING_NUM_DESCS * 2)
+#define MTK_MAC_DMA_SIZE \
+		(MTK_MAC_NUM_DESCS_TOTAL * sizeof(struct mtk_mac_ring_desc))
+
+struct mtk_mac_ring {
+	struct mtk_mac_ring_desc *descs;
+	struct sk_buff *skbs[MTK_MAC_RING_NUM_DESCS];
+	unsigned int head;
+	unsigned int tail;
+	unsigned int count;
+};
+
+struct mtk_mac_priv {
+	struct regmap *regs;
+	struct regmap *pericfg;
+
+	struct clk_bulk_data clks[MTK_MAC_NCLKS];
+
+	void *ring_base;
+	struct mtk_mac_ring_desc *descs_base;
+	dma_addr_t dma_addr;
+	struct mtk_mac_ring tx_ring;
+	struct mtk_mac_ring rx_ring;
+
+	struct mii_bus *mii;
+	struct napi_struct napi;
+
+	struct device_node *phy_node;
+	phy_interface_t phy_intf;
+	struct phy_device *phydev;
+	unsigned int link;
+	int speed;
+	int duplex;
+	int pause;
+
+	/* Protects against concurrent descriptor access. */
+	spinlock_t lock;
+	unsigned long lock_flags;
+
+	struct rtnl_link_stats64 stats;
+};
+
+static struct device *mtk_mac_get_dev(struct mtk_mac_priv *priv)
+{
+	struct net_device *ndev = priv_to_netdev(priv);
+
+	return ndev->dev.parent;
+}
+
+static const struct regmap_config mtk_mac_regmap_config = {
+	.reg_bits		= 32,
+	.val_bits		= 32,
+	.reg_stride		= 4,
+	.fast_io		= true,
+};
+
+static void mtk_mac_ring_init(struct mtk_mac_ring *ring,
+			      struct mtk_mac_ring_desc *descs,
+			      unsigned int start_count)
+{
+	memset(ring, 0, sizeof(*ring));
+	ring->descs = descs;
+	ring->head = 0;
+	ring->tail = 0;
+	ring->count = start_count;
+}
+
+static int mtk_mac_ring_pop_tail(struct mtk_mac_ring *ring,
+				 struct mtk_mac_ring_desc_data *desc_data)
+{
+	struct mtk_mac_ring_desc *desc = &ring->descs[ring->tail];
+	unsigned int status;
+
+	/* Let the device release the descriptor. */
+	dma_rmb();
+	status = desc->status;
+
+	if (!(status & MTK_MAC_DESC_BIT_COWN))
+		return -1;
+
+	desc_data->len = status & MTK_MAC_DESC_MSK_LEN;
+	desc_data->flags = status & ~MTK_MAC_DESC_MSK_LEN;
+	desc_data->dma_addr = desc->data_ptr;
+	desc_data->skb = ring->skbs[ring->tail];
+
+	desc->data_ptr = 0;
+	desc->status = MTK_MAC_DESC_BIT_COWN;
+	if (status & MTK_MAC_DESC_BIT_EOR)
+		desc->status |= MTK_MAC_DESC_BIT_EOR;
+
+	ring->tail = (ring->tail + 1) % MTK_MAC_RING_NUM_DESCS;
+	ring->count--;
+
+	return 0;
+}
+
+static void mtk_mac_ring_push_head(struct mtk_mac_ring *ring,
+				   struct mtk_mac_ring_desc_data *desc_data,
+				   unsigned int flags)
+{
+	struct mtk_mac_ring_desc *desc = &ring->descs[ring->head];
+	unsigned int status;
+
+	status = desc->status;
+
+	ring->skbs[ring->head] = desc_data->skb;
+	desc->data_ptr = desc_data->dma_addr;
+
+	status |= desc_data->len;
+	if (flags)
+		status |= flags;
+	desc->status = status;
+
+	/* Flush modifications before ownership change. */
+	dma_wmb();
+	desc->status &= ~MTK_MAC_DESC_BIT_COWN;
+
+	ring->head = (ring->head + 1) % MTK_MAC_RING_NUM_DESCS;
+	ring->count++;
+}
+
+static void mtk_mac_ring_push_head_rx(struct mtk_mac_ring *ring,
+				      struct mtk_mac_ring_desc_data *desc_data)
+{
+	mtk_mac_ring_push_head(ring, desc_data, 0);
+}
+
+static void mtk_mac_ring_push_head_tx(struct mtk_mac_ring *ring,
+				      struct mtk_mac_ring_desc_data *desc_data)
+{
+	static const unsigned int flags = MTK_MAC_DESC_BIT_FS |
+					  MTK_MAC_DESC_BIT_LS |
+					  MTK_MAC_DESC_BIT_INT;
+
+	mtk_mac_ring_push_head(ring, desc_data, flags);
+}
+
+static bool mtk_mac_ring_full(struct mtk_mac_ring *ring)
+{
+	return ring->count == MTK_MAC_RING_NUM_DESCS;
+}
+
+static bool mtk_mac_ring_descs_available(struct mtk_mac_ring *ring)
+{
+	return ring->count > 0;
+}
+
+static void mtk_mac_lock(struct mtk_mac_priv *priv)
+{
+	spin_lock_irqsave(&priv->lock, priv->lock_flags);
+}
+
+static void mtk_mac_unlock(struct mtk_mac_priv *priv)
+{
+	spin_unlock_irqrestore(&priv->lock, priv->lock_flags);
+}
+
+static dma_addr_t mtk_mac_dma_map_rx(struct mtk_mac_priv *priv,
+				     struct sk_buff *skb)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	/* Data pointer for the RX DMA descriptor must be aligned to 4N + 2. */
+	return dma_map_single(dev, skb_tail_pointer(skb) - 2,
+			      skb_tailroom(skb), DMA_FROM_DEVICE);
+}
+
+static void mtk_mac_dma_unmap_rx(struct mtk_mac_priv *priv,
+				 struct mtk_mac_ring_desc_data *desc_data)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	dma_unmap_single(dev, desc_data->dma_addr,
+			 skb_tailroom(desc_data->skb), DMA_FROM_DEVICE);
+}
+
+static dma_addr_t mtk_mac_dma_map_tx(struct mtk_mac_priv *priv,
+				     struct sk_buff *skb)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	return dma_map_single(dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE);
+}
+
+static void mtk_mac_dma_unmap_tx(struct mtk_mac_priv *priv,
+				 struct mtk_mac_ring_desc_data *desc_data)
+{
+	struct device *dev = mtk_mac_get_dev(priv);
+
+	return dma_unmap_single(dev, desc_data->dma_addr,
+				desc_data->len, DMA_TO_DEVICE);
+}
+
+static void mtk_mac_nic_disable_pd(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_MAC_CFG,
+			   MTK_MAC_BIT_MAC_CFG_NIC_PD, 0);
+}
+
+static void mtk_mac_intr_unmask_all(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_INT_MASK, 0);
+}
+
+static void mtk_mac_intr_mask_all(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_INT_MASK, ~0);
+}
+
+static unsigned int mtk_mac_intr_read_and_clear(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	regmap_read(priv->regs, MTK_MAC_REG_INT_STS, &val);
+	regmap_write(priv->regs, MTK_MAC_REG_INT_STS, val);
+
+	return val;
+}
+
+static void mtk_mac_dma_init(struct mtk_mac_priv *priv)
+{
+	struct mtk_mac_ring_desc *desc;
+	unsigned int val;
+	int i;
+
+	priv->descs_base = (struct mtk_mac_ring_desc *)priv->ring_base;
+
+	for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++) {
+		desc = &priv->descs_base[i];
+
+		memset(desc, 0, sizeof(*desc));
+		desc->status = MTK_MAC_DESC_BIT_COWN;
+		if ((i == MTK_MAC_NUM_TX_DESCS - 1) ||
+		    (i == MTK_MAC_NUM_DESCS_TOTAL - 1))
+			desc->status |= MTK_MAC_DESC_BIT_EOR;
+	}
+
+	mtk_mac_ring_init(&priv->tx_ring, priv->descs_base, 0);
+	mtk_mac_ring_init(&priv->rx_ring,
+			  priv->descs_base + MTK_MAC_NUM_TX_DESCS,
+			  MTK_MAC_NUM_RX_DESCS);
+
+	/* Set DMA pointers. */
+	val = (unsigned int)priv->dma_addr;
+	regmap_write(priv->regs, MTK_MAC_REG_TX_BASE_ADDR, val);
+	regmap_write(priv->regs, MTK_MAC_REG_TX_DPTR, val);
+
+	val += sizeof(struct mtk_mac_ring_desc) * MTK_MAC_NUM_TX_DESCS;
+	regmap_write(priv->regs, MTK_MAC_REG_RX_BASE_ADDR, val);
+	regmap_write(priv->regs, MTK_MAC_REG_RX_DPTR, val);
+}
+
+static void mtk_mac_dma_start(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_TX_DMA_CTRL,
+			   MTK_MAC_BIT_TX_DMA_CTRL_START,
+			   MTK_MAC_BIT_TX_DMA_CTRL_START);
+	regmap_update_bits(priv->regs, MTK_MAC_REG_RX_DMA_CTRL,
+			   MTK_MAC_BIT_RX_DMA_CTRL_START,
+			   MTK_MAC_BIT_RX_DMA_CTRL_START);
+}
+
+static void mtk_mac_dma_stop(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_TX_DMA_CTRL,
+		     MTK_MAC_BIT_TX_DMA_CTRL_STOP);
+	regmap_write(priv->regs, MTK_MAC_REG_RX_DMA_CTRL,
+		     MTK_MAC_BIT_RX_DMA_CTRL_STOP);
+}
+
+static void mtk_mac_dma_disable(struct mtk_mac_priv *priv)
+{
+	int i;
+
+	mtk_mac_dma_stop(priv);
+
+	/* Take back all descriptors. */
+	for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++)
+		priv->descs_base[i].status |= MTK_MAC_DESC_BIT_COWN;
+}
+
+static void mtk_mac_dma_resume_rx(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_RX_DMA_CTRL,
+			   MTK_MAC_BIT_RX_DMA_CTRL_RESUME,
+			   MTK_MAC_BIT_RX_DMA_CTRL_RESUME);
+}
+
+static void mtk_mac_dma_resume_tx(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->regs, MTK_MAC_REG_TX_DMA_CTRL,
+			   MTK_MAC_BIT_TX_DMA_CTRL_RESUME,
+			   MTK_MAC_BIT_TX_DMA_CTRL_RESUME);
+}
+
+static void mtk_mac_set_mac_addr(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	u8 *mac_addr = ndev->dev_addr;
+	unsigned int high, low;
+
+	high = mac_addr[0] << 8 | mac_addr[1] << 0;
+	low = mac_addr[2] << 24 | mac_addr[3] << 16 |
+	      mac_addr[4] << 8 | mac_addr[5];
+
+	regmap_write(priv->regs, MTK_MAC_REG_MY_MAC_H, high);
+	regmap_write(priv->regs, MTK_MAC_REG_MY_MAC_L, low);
+}
+
+static void mtk_mac_reset_counters(struct mtk_mac_priv *priv)
+{
+	static const unsigned int counter_regs[] = {
+		MTK_MAC_REG_C_RXOKPKT,
+		MTK_MAC_REG_C_RXOKBYTE,
+		MTK_MAC_REG_C_RXRUNT,
+		MTK_MAC_REG_C_RXLONG,
+		MTK_MAC_REG_C_RXDROP,
+		MTK_MAC_REG_C_RXCRC,
+		MTK_MAC_REG_C_RXARLDROP,
+		MTK_MAC_REG_C_RXVLANDROP,
+		MTK_MAC_REG_C_RXCSERR,
+		MTK_MAC_REG_C_RXPAUSE,
+		MTK_MAC_REG_C_TXOKPKT,
+		MTK_MAC_REG_C_TXOKBYTE,
+		MTK_MAC_REG_C_TXPAUSECOL,
+		MTK_MAC_REG_C_TXRTY,
+		MTK_MAC_REG_C_TXSKIP,
+		MTK_MAC_REG_C_TX_ARP,
+		MTK_MAC_REG_C_RX_RERR,
+		MTK_MAC_REG_C_RX_UNI,
+		MTK_MAC_REG_C_RX_MULTI,
+		MTK_MAC_REG_C_RX_BROAD,
+		MTK_MAC_REG_C_RX_ALIGNERR,
+		MTK_MAC_REG_C_TX_UNI,
+		MTK_MAC_REG_C_TX_MULTI,
+		MTK_MAC_REG_C_TX_BROAD,
+		MTK_MAC_REG_C_TX_TIMEOUT,
+		MTK_MAC_REG_C_TX_LATECOL,
+		MTK_MAC_REG_C_RX_LENGTHERR,
+		MTK_MAC_REG_C_RX_TWIST,
+	};
+
+	unsigned int i, val;
+
+	for (i = 0; i < ARRAY_SIZE(counter_regs); i++)
+		regmap_read(priv->regs, counter_regs[i], &val);
+}
+
+static void mtk_mac_update_stat(struct mtk_mac_priv *priv,
+				unsigned int reg, u64 *stat)
+{
+	unsigned int val;
+
+	regmap_read(priv->regs, reg, &val);
+	*stat += val;
+}
+
+/* Try to get as many stats as possible from the internal registers instead
+ * of tracking them ourselves.
+ */
+static void mtk_mac_update_stats(struct mtk_mac_priv *priv)
+{
+	struct rtnl_link_stats64 *stats = &priv->stats;
+
+	/* OK packets and bytes. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXOKPKT, &stats->rx_packets);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TXOKPKT, &stats->tx_packets);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXOKBYTE, &stats->rx_bytes);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TXOKBYTE, &stats->tx_bytes);
+
+	/* RX & TX multicast. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_MULTI, &stats->multicast);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TX_MULTI, &stats->multicast);
+
+	/* Collisions. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TXPAUSECOL, &stats->collisions);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_TX_LATECOL, &stats->collisions);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXRUNT, &stats->collisions);
+
+	/* RX Errors. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_LENGTHERR,
+			    &stats->rx_length_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXLONG, &stats->rx_over_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXCRC, &stats->rx_crc_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_ALIGNERR,
+			    &stats->rx_frame_errors);
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RXDROP, &stats->rx_fifo_errors);
+	/* Sum of the general RX error counter + all of the above. */
+	mtk_mac_update_stat(priv, MTK_MAC_REG_C_RX_RERR, &stats->rx_errors);
+	stats->rx_errors += stats->rx_length_errors;
+	stats->rx_errors += stats->rx_over_errors;
+	stats->rx_errors += stats->rx_crc_errors;
+	stats->rx_errors += stats->rx_frame_errors;
+	stats->rx_errors += stats->rx_fifo_errors;
+}
+
+static struct sk_buff *mtk_mac_alloc_skb(struct net_device *ndev)
+{
+	uintptr_t tail, offset;
+	struct sk_buff *skb;
+
+	skb = dev_alloc_skb(MTK_MAC_MAX_FRAME_SIZE);
+	if (!skb)
+		return NULL;
+
+	/* Align to 16 bytes. */
+	tail = (uintptr_t)skb_tail_pointer(skb);
+	if (tail & (MTK_MAC_SKB_ALIGNMENT - 1)) {
+		offset = tail & (MTK_MAC_SKB_ALIGNMENT - 1);
+		skb_reserve(skb, MTK_MAC_SKB_ALIGNMENT - offset);
+	}
+
+	/* Ensure 16-byte alignment of the skb pointer: eth_type_trans() will
+	 * extract the Ethernet header (14 bytes) so we need two more bytes.
+	 */
+	skb_reserve(skb, NET_IP_ALIGN);
+
+	return skb;
+}
+
+static int mtk_mac_prepare_rx_skbs(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->rx_ring;
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct mtk_mac_ring_desc *desc;
+	struct sk_buff *skb;
+	dma_addr_t dma_addr;
+	int i;
+
+	for (i = 0; i < MTK_MAC_NUM_RX_DESCS; i++) {
+		skb = mtk_mac_alloc_skb(ndev);
+		if (!skb)
+			return -ENOMEM;
+
+		dma_addr = mtk_mac_dma_map_rx(priv, skb);
+		if (dma_mapping_error(dev, dma_addr)) {
+			dev_kfree_skb(skb);
+			return -ENOMEM;
+		}
+
+		desc = &ring->descs[i];
+		desc->data_ptr = dma_addr;
+		desc->status |= skb_tailroom(skb) & MTK_MAC_DESC_MSK_LEN;
+		desc->status &= ~MTK_MAC_DESC_BIT_COWN;
+		ring->skbs[i] = skb;
+	}
+
+	ring->count = MTK_MAC_NUM_RX_DESCS;
+
+	return 0;
+}
+
+/* All processing for TX and RX happens in the napi poll callback. */
+static irqreturn_t mtk_mac_handle_irq(int irq, void *data)
+{
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+
+	ndev = data;
+	priv = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		mtk_mac_intr_mask_all(priv);
+		napi_schedule(&priv->napi);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void mtk_mac_free_rx_skbs(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->rx_ring;
+	struct mtk_mac_ring_desc_data desc_data;
+	struct mtk_mac_ring_desc *desc;
+	int i;
+
+	for (i = 0; i < MTK_MAC_NUM_RX_DESCS; i++) {
+		desc = &ring->descs[i];
+
+		if (!desc->data_ptr)
+			continue;
+
+		desc_data.dma_addr = desc->data_ptr;
+		desc_data.skb = ring->skbs[i];
+
+		mtk_mac_dma_unmap_rx(priv, &desc_data);
+		dev_kfree_skb(desc_data.skb);
+	}
+}
+
+static void mtk_mac_free_tx_skbs(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	struct mtk_mac_ring_desc_data desc_data;
+	struct mtk_mac_ring_desc *desc;
+	int i;
+
+	for (i = 0; i < MTK_MAC_NUM_TX_DESCS; i++) {
+		desc = &ring->descs[i];
+
+		if (!desc->data_ptr)
+			continue;
+
+		desc_data.dma_addr = desc->data_ptr;
+		desc_data.len = desc->status & MTK_MAC_DESC_MSK_LEN;
+		desc_data.skb = ring->skbs[i];
+
+		mtk_mac_dma_unmap_tx(priv, &desc_data);
+		dev_kfree_skb(desc_data.skb);
+	}
+}
+
+/* Wait for the completion of any previous command - CMD_START bit must be
+ * cleared by hardware.
+ */
+static int mtk_mac_hash_wait_cmd_start(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout_atomic(priv->regs,
+				MTK_MAC_REG_HASH_CTRL, val,
+				!(val & MTK_MAC_BIT_HASH_CTRL_CMD_START),
+				10, MTK_MAC_WAIT_TIMEOUT);
+}
+
+static int mtk_mac_hash_wait_ok(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+	int ret;
+
+	/* Wait for BIST_DONE bit. */
+	ret = regmap_read_poll_timeout_atomic(priv->regs,
+					MTK_MAC_REG_HASH_CTRL, val,
+					val & MTK_MAC_BIT_HASH_CTRL_BIST_DONE,
+					10, MTK_MAC_WAIT_TIMEOUT);
+	if (ret)
+		return ret;
+
+	/* Check the BIST_OK bit. */
+	regmap_read(priv->regs, MTK_MAC_REG_HASH_CTRL, &val);
+	if (!(val & MTK_MAC_BIT_HASH_CTRL_BIST_OK))
+		return -EIO;
+
+	return 0;
+}
+
+static int mtk_mac_set_hashbit(struct mtk_mac_priv *priv,
+			       unsigned int hash_addr)
+{
+	unsigned int val;
+	int ret;
+
+	ret = mtk_mac_hash_wait_cmd_start(priv);
+	if (ret)
+		return ret;
+
+	val = hash_addr & MTK_MAC_MSK_HASH_CTRL_HASH_BIT_ADDR;
+	val |= MTK_MAC_BIT_HASH_CTRL_ACC_CMD;
+	val |= MTK_MAC_BIT_HASH_CTRL_CMD_START;
+	val |= MTK_MAC_BIT_HASH_CTRL_BIST_EN;
+	val |= MTK_MAC_BIT_HASH_CTRL_HASH_BIT_DATA;
+	regmap_write(priv->regs, MTK_MAC_REG_HASH_CTRL, val);
+
+	return mtk_mac_hash_wait_ok(priv);
+}
+
+static int mtk_mac_reset_hash_table(struct mtk_mac_priv *priv)
+{
+	int ret;
+
+	ret = mtk_mac_hash_wait_cmd_start(priv);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(priv->regs, MTK_MAC_REG_HASH_CTRL,
+			   MTK_MAC_BIT_HASH_CTRL_BIST_EN,
+			   MTK_MAC_BIT_HASH_CTRL_BIST_EN);
+	regmap_update_bits(priv->regs, MTK_MAC_REG_TEST1,
+			   MTK_MAC_BIT_TEST1_RST_HASH_MBIST,
+			   MTK_MAC_BIT_TEST1_RST_HASH_MBIST);
+
+	return mtk_mac_hash_wait_ok(priv);
+}
+
+static void mtk_mac_phy_config(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	if (priv->speed == SPEED_1000)
+		val = MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_1000M;
+	else if (priv->speed == SPEED_100)
+		val = MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_100M;
+	else
+		val = MTK_MAC_VAL_PHY_CTRL1_FORCE_SPD_10M;
+	val <<= MTK_MAC_OFF_PHY_CTRL1_FORCE_SPD;
+
+	val |= MTK_MAC_BIT_PHY_CTRL1_AN_EN;
+	val |= MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_RX;
+	val |= MTK_MAC_BIT_PHY_CTRL1_FORCE_FC_TX;
+	/* Only full-duplex supported for now. */
+	val |= MTK_MAC_BIT_PHY_CTRL1_FORCE_DPX;
+
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL1, val);
+
+	if (priv->pause) {
+		val = MTK_MAC_VAL_FC_CFG_SEND_PAUSE_TH_2K;
+		val <<= MTK_MAC_OFF_FC_CFG_SEND_PAUSE_TH;
+		val |= MTK_MAC_BIT_FC_CFG_UC_PAUSE_DIR;
+	} else {
+		val = 0;
+	}
+
+	regmap_update_bits(priv->regs, MTK_MAC_REG_FC_CFG,
+			   MTK_MAC_MSK_FC_CFG_SEND_PAUSE_TH |
+			   MTK_MAC_BIT_FC_CFG_UC_PAUSE_DIR, val);
+
+	if (priv->pause) {
+		val = MTK_MAC_VAL_EXT_CFG_SND_PAUSE_RLS_1K;
+		val <<= MTK_MAC_OFF_EXT_CFG_SND_PAUSE_RLS;
+	} else {
+		val = 0;
+	}
+
+	regmap_update_bits(priv->regs, MTK_MAC_REG_EXT_CFG,
+			   MTK_MAC_MSK_EXT_CFG_SND_PAUSE_RLS, val);
+}
+
+static void mtk_mac_adjust_link(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct phy_device *phydev = priv->phydev;
+	bool new_state = false;
+
+	if (phydev->link) {
+		if (!priv->link) {
+			priv->link = phydev->link;
+			new_state = true;
+		}
+
+		if (priv->speed != phydev->speed) {
+			priv->speed = phydev->speed;
+			new_state = true;
+		}
+
+		if (priv->pause != phydev->pause) {
+			priv->pause = phydev->pause;
+			new_state = true;
+		}
+	} else {
+		if (priv->link) {
+			priv->link = phydev->link;
+			new_state = true;
+		}
+	}
+
+	if (new_state) {
+		if (phydev->link)
+			mtk_mac_phy_config(priv);
+		phy_print_status(ndev->phydev);
+	}
+}
+
+static void mtk_mac_init_config(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	val = (MTK_MAC_BIT_MII_PAD_OUT_ENABLE |
+	       MTK_MAC_BIT_EXT_MDC_MODE |
+	       MTK_MAC_BIT_SWC_MII_MODE);
+
+	regmap_write(priv->regs, MTK_MAC_REG_SYS_CONF, val);
+	regmap_update_bits(priv->regs, MTK_MAC_REG_MAC_CLK_CONF,
+			   MTK_MAC_MSK_MAC_CLK_CONF,
+			   MTK_MAC_BIT_CLK_DIV_10);
+}
+
+static void mtk_mac_set_mode_rmii(struct mtk_mac_priv *priv)
+{
+	regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG_CON,
+			   MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII,
+			   MTK_PERICFG_BIT_NIC_CFG_CON_RMII);
+}
+
+static int mtk_mac_enable(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	unsigned int val;
+	int ret;
+
+	mtk_mac_nic_disable_pd(priv);
+	mtk_mac_intr_mask_all(priv);
+	mtk_mac_dma_stop(priv);
+
+	mtk_mac_set_mac_addr(ndev);
+
+	/* Configure the MAC */
+	val = MTK_MAC_VAL_MAC_CFG_IPG_96BIT;
+	val <<= MTK_MAC_OFF_MAC_CFG_IPG;
+	val |= MTK_MAC_BIT_MAC_CFG_MAXLEN_1522;
+	val |= MTK_MAC_BIT_MAC_CFG_AUTO_PAD;
+	val |= MTK_MAC_BIT_MAC_CFG_CRC_STRIP;
+	regmap_write(priv->regs, MTK_MAC_REG_MAC_CFG, val);
+
+	/* Enable Hash Table BIST and reset it */
+	ret = mtk_mac_reset_hash_table(priv);
+	if (ret)
+		return ret;
+
+	/* Setup the hashing algorithm */
+	regmap_update_bits(priv->regs, MTK_MAC_REG_ARL_CFG,
+			   MTK_MAC_BIT_ARL_CFG_HASH_ALG |
+			   MTK_MAC_BIT_ARL_CFG_MISC_MODE, 0);
+
+	/* Don't strip VLAN tags */
+	regmap_update_bits(priv->regs, MTK_MAC_REG_MAC_CFG,
+			   MTK_MAC_BIT_MAC_CFG_VLAN_STRIP, 0);
+
+	/* Setup DMA */
+	mtk_mac_dma_init(priv);
+
+	ret = mtk_mac_prepare_rx_skbs(ndev);
+	if (ret)
+		goto err_out;
+
+	/* Request the interrupt */
+	ret = request_irq(ndev->irq, mtk_mac_handle_irq,
+			  IRQF_TRIGGER_FALLING, ndev->name, ndev);
+	if (ret)
+		goto err_free_skbs;
+
+	napi_enable(&priv->napi);
+
+	mtk_mac_intr_read_and_clear(priv);
+	mtk_mac_intr_unmask_all(priv);
+
+	/* Connect to and start PHY */
+	priv->phydev = of_phy_connect(ndev, priv->phy_node,
+				      mtk_mac_adjust_link, 0, priv->phy_intf);
+	if (!priv->phydev) {
+		netdev_err(ndev, "failed to connect to PHY\n");
+		goto err_free_irq;
+	}
+
+	mtk_mac_dma_start(priv);
+	phy_start(priv->phydev);
+	netif_start_queue(ndev);
+
+	return 0;
+
+err_free_irq:
+	free_irq(ndev->irq, ndev);
+err_free_skbs:
+	mtk_mac_free_rx_skbs(ndev);
+err_out:
+	return ret;
+}
+
+static void mtk_mac_disable(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	napi_disable(&priv->napi);
+	mtk_mac_intr_mask_all(priv);
+	mtk_mac_dma_disable(priv);
+	mtk_mac_intr_read_and_clear(priv);
+	phy_stop(priv->phydev);
+	phy_disconnect(priv->phydev);
+	free_irq(ndev->irq, ndev);
+	mtk_mac_free_rx_skbs(ndev);
+	mtk_mac_free_tx_skbs(ndev);
+}
+
+static int mtk_mac_netdev_open(struct net_device *ndev)
+{
+	return mtk_mac_enable(ndev);
+}
+
+static int mtk_mac_netdev_stop(struct net_device *ndev)
+{
+	mtk_mac_disable(ndev);
+
+	return 0;
+}
+
+static int mtk_mac_netdev_ioctl(struct net_device *ndev,
+				struct ifreq *req, int cmd)
+{
+	if (!netif_running(ndev))
+		return -EINVAL;
+
+	return phy_mii_ioctl(ndev->phydev, req, cmd);
+}
+
+static int mtk_mac_netdev_start_xmit(struct sk_buff *skb,
+				     struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct mtk_mac_ring_desc_data desc_data;
+
+	desc_data.dma_addr = mtk_mac_dma_map_tx(priv, skb);
+	if (dma_mapping_error(dev, desc_data.dma_addr))
+		goto err_drop_packet;
+
+	desc_data.skb = skb;
+	desc_data.len = skb->len;
+
+	mtk_mac_lock(priv);
+	mtk_mac_ring_push_head_tx(ring, &desc_data);
+
+	if (mtk_mac_ring_full(ring))
+		netif_stop_queue(ndev);
+	mtk_mac_unlock(priv);
+
+	mtk_mac_dma_resume_tx(priv);
+
+	return NETDEV_TX_OK;
+
+err_drop_packet:
+	dev_kfree_skb(skb);
+	ndev->stats.tx_dropped++;
+	return NETDEV_TX_BUSY;
+}
+
+static int mtk_mac_tx_complete_one(struct mtk_mac_priv *priv)
+{
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	struct mtk_mac_ring_desc_data desc_data;
+	int ret;
+
+	ret = mtk_mac_ring_pop_tail(ring, &desc_data);
+	if (ret)
+		return ret;
+
+	mtk_mac_dma_unmap_tx(priv, &desc_data);
+	dev_kfree_skb_irq(desc_data.skb);
+
+	return 0;
+}
+
+static void mtk_mac_tx_complete_all(struct mtk_mac_priv *priv)
+{
+	struct net_device *ndev = priv_to_netdev(priv);
+	struct mtk_mac_ring *ring = &priv->tx_ring;
+	int ret;
+
+	for (;;) {
+		mtk_mac_lock(priv);
+
+		if (!mtk_mac_ring_descs_available(ring)) {
+			mtk_mac_unlock(priv);
+			break;
+		}
+
+		ret = mtk_mac_tx_complete_one(priv);
+		if (ret) {
+			mtk_mac_unlock(priv);
+			break;
+		}
+
+		if (netif_queue_stopped(ndev))
+			netif_wake_queue(ndev);
+
+		mtk_mac_unlock(priv);
+	}
+}
+
+static void mtk_mac_netdev_get_stats64(struct net_device *ndev,
+				       struct rtnl_link_stats64 *stats)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+
+	mtk_mac_update_stats(priv);
+
+	memcpy(stats, &priv->stats, sizeof(*stats));
+}
+
+static void mtk_mac_set_rx_mode(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct netdev_hw_addr *hw_addr;
+	unsigned int hash_addr, i;
+	int ret;
+
+	if (ndev->flags & IFF_PROMISC) {
+		regmap_update_bits(priv->regs, MTK_MAC_REG_ARL_CFG,
+				   MTK_MAC_BIT_ARL_CFG_MISC_MODE,
+				   MTK_MAC_BIT_ARL_CFG_MISC_MODE);
+	} else if (netdev_mc_count(ndev) > MTK_MAC_HASHTABLE_MC_LIMIT ||
+		   ndev->flags & IFF_ALLMULTI) {
+		for (i = 0; i < MTK_MAC_HASHTABLE_SIZE_MAX; i++) {
+			ret = mtk_mac_set_hashbit(priv, i);
+			if (ret)
+				goto hash_fail;
+		}
+	} else {
+		/* Clear previous settings. */
+		ret = mtk_mac_reset_hash_table(priv);
+		if (ret)
+			goto hash_fail;
+
+		netdev_for_each_mc_addr(hw_addr, ndev) {
+			hash_addr = (hw_addr->addr[0] & 0x01) << 8;
+			hash_addr += hw_addr->addr[5];
+			ret = mtk_mac_set_hashbit(priv, hash_addr);
+			if (ret)
+				goto hash_fail;
+		}
+	}
+
+	return;
+
+hash_fail:
+	if (ret == -ETIMEDOUT)
+		netdev_err(ndev, "setting hash bit timed out\n");
+	else
+		/* Should be -EIO */
+		netdev_err(ndev, "unable to set hash bit");
+}
+
+static const struct net_device_ops mtk_mac_netdev_ops = {
+	.ndo_open		= mtk_mac_netdev_open,
+	.ndo_stop		= mtk_mac_netdev_stop,
+	.ndo_start_xmit		= mtk_mac_netdev_start_xmit,
+	.ndo_get_stats64	= mtk_mac_netdev_get_stats64,
+	.ndo_set_rx_mode	= mtk_mac_set_rx_mode,
+	.ndo_do_ioctl		= mtk_mac_netdev_ioctl,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static void mtk_mac_get_drvinfo(struct net_device *dev,
+				struct ethtool_drvinfo *info)
+{
+	strlcpy(info->driver, MTK_MAC_DRVNAME, sizeof(info->driver));
+}
+
+/* TODO Add ethtool stats. */
+static const struct ethtool_ops mtk_mac_ethtool_ops = {
+	.get_drvinfo		= mtk_mac_get_drvinfo,
+	.get_link		= ethtool_op_get_link,
+	.get_link_ksettings	= phy_ethtool_get_link_ksettings,
+	.set_link_ksettings	= phy_ethtool_set_link_ksettings,
+};
+
+static int mtk_mac_receive_packet(struct mtk_mac_priv *priv)
+{
+	struct net_device *ndev = priv_to_netdev(priv);
+	struct mtk_mac_ring *ring = &priv->rx_ring;
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct mtk_mac_ring_desc_data desc_data;
+	struct sk_buff *curr_skb, *new_skb;
+	dma_addr_t new_dma_addr;
+	int ret;
+
+	mtk_mac_lock(priv);
+	ret = mtk_mac_ring_pop_tail(ring, &desc_data);
+	mtk_mac_unlock(priv);
+	if (ret)
+		return -1;
+
+	curr_skb = desc_data.skb;
+
+	if ((desc_data.flags & MTK_MAC_DESC_BIT_RX_CRCE) ||
+	    (desc_data.flags & MTK_MAC_DESC_BIT_RX_OSIZE)) {
+		/* Error packet -> drop and reuse skb. */
+		new_skb = curr_skb;
+		goto push_new_skb;
+	}
+
+	/* Prepare new skb before receiving the current one. Reuse the current
+	 * skb if we fail at any point.
+	 */
+	new_skb = mtk_mac_alloc_skb(ndev);
+	if (!new_skb) {
+		ndev->stats.rx_dropped++;
+		new_skb = curr_skb;
+		goto push_new_skb;
+	}
+
+	new_dma_addr = mtk_mac_dma_map_rx(priv, new_skb);
+	if (dma_mapping_error(dev, new_dma_addr)) {
+		ndev->stats.rx_dropped++;
+		dev_kfree_skb(new_skb);
+		new_skb = curr_skb;
+		netdev_err(ndev, "DMA mapping error of RX descriptor\n");
+		goto push_new_skb;
+	}
+
+	/* We can't fail anymore at this point: it's safe to unmap the skb. */
+	mtk_mac_dma_unmap_rx(priv, &desc_data);
+
+	skb_put(desc_data.skb, desc_data.len);
+	desc_data.skb->ip_summed = CHECKSUM_NONE;
+	desc_data.skb->protocol = eth_type_trans(desc_data.skb, ndev);
+	desc_data.skb->dev = ndev;
+	netif_receive_skb(desc_data.skb);
+
+push_new_skb:
+	desc_data.dma_addr = new_dma_addr;
+	desc_data.len = skb_tailroom(new_skb);
+	desc_data.skb = new_skb;
+
+	mtk_mac_lock(priv);
+	mtk_mac_ring_push_head_rx(ring, &desc_data);
+	mtk_mac_unlock(priv);
+
+	return 0;
+}
+
+static int mtk_mac_process_rx(struct mtk_mac_priv *priv, int budget)
+{
+	int received, ret;
+
+	for (received = 0, ret = 0; received < budget && ret == 0; received++)
+		ret = mtk_mac_receive_packet(priv);
+
+	mtk_mac_dma_resume_rx(priv);
+
+	return received;
+}
+
+static int mtk_mac_poll(struct napi_struct *napi, int budget)
+{
+	struct mtk_mac_priv *priv;
+	unsigned int status;
+	int received = 0;
+
+	priv = container_of(napi, struct mtk_mac_priv, napi);
+
+	status = mtk_mac_intr_read_and_clear(priv);
+
+	/* Clean up TX */
+	if (status & MTK_MAC_BIT_INT_STS_TNTC)
+		mtk_mac_tx_complete_all(priv);
+
+	/* Receive up to $budget packets */
+	if (status & MTK_MAC_BIT_INT_STS_FNRC)
+		received = mtk_mac_process_rx(priv, budget);
+
+	/* One of the counter reached 0x8000000 */
+	if (status & MTK_MAC_REG_INT_STS_MIB_CNT_TH) {
+		mtk_mac_update_stats(priv);
+		mtk_mac_reset_counters(priv);
+	}
+
+	if (received < budget)
+		napi_complete_done(napi, received);
+
+	mtk_mac_intr_unmask_all(priv);
+
+	return received;
+}
+
+static void mtk_mac_mdio_rwok_clear(struct mtk_mac_priv *priv)
+{
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL0,
+		     MTK_MAC_BIT_PHY_CTRL0_RWOK);
+}
+
+static int mtk_mac_mdio_rwok_wait(struct mtk_mac_priv *priv)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(priv->regs, MTK_MAC_REG_PHY_CTRL0,
+					val, val & MTK_MAC_BIT_PHY_CTRL0_RWOK,
+					10, MTK_MAC_WAIT_TIMEOUT);
+}
+
+static int mtk_mac_mdio_read(struct mii_bus *mii, int phy_id, int regnum)
+{
+	struct mtk_mac_priv *priv = mii->priv;
+	unsigned int val, data;
+	int ret;
+
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	mtk_mac_mdio_rwok_clear(priv);
+
+	val = (regnum << MTK_MAC_OFF_PHY_CTRL0_PREG);
+	val &= MTK_MAC_MSK_PHY_CTRL0_PREG;
+	val |= MTK_MAC_BIT_PHY_CTRL0_RDCMD;
+
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL0, val);
+
+	ret = mtk_mac_mdio_rwok_wait(priv);
+	if (ret)
+		return ret;
+
+	regmap_read(priv->regs, MTK_MAC_REG_PHY_CTRL0, &data);
+
+	data &= MTK_MAC_MSK_PHY_CTRL0_RWDATA;
+	data >>= MTK_MAC_OFF_PHY_CTRL0_RWDATA;
+
+	return data;
+}
+
+static int mtk_mac_mdio_write(struct mii_bus *mii, int phy_id,
+			      int regnum, u16 data)
+{
+	struct mtk_mac_priv *priv = mii->priv;
+	unsigned int val;
+
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	mtk_mac_mdio_rwok_clear(priv);
+
+	val = data;
+	val <<= MTK_MAC_OFF_PHY_CTRL0_RWDATA;
+	val &= MTK_MAC_MSK_PHY_CTRL0_RWDATA;
+	regnum <<= MTK_MAC_OFF_PHY_CTRL0_PREG;
+	regnum &= MTK_MAC_MSK_PHY_CTRL0_PREG;
+	val |= regnum;
+	val |= MTK_MAC_BIT_PHY_CTRL0_WTCMD;
+
+	regmap_write(priv->regs, MTK_MAC_REG_PHY_CTRL0, val);
+
+	return mtk_mac_mdio_rwok_wait(priv);
+}
+
+static int mtk_mac_mdio_init(struct net_device *ndev)
+{
+	struct mtk_mac_priv *priv = netdev_priv(ndev);
+	struct device *dev = mtk_mac_get_dev(priv);
+	struct device_node *of_node, *mdio_node;
+	int ret;
+
+	of_node = dev->of_node;
+
+	mdio_node = of_get_child_by_name(of_node, "mdio");
+	if (!mdio_node)
+		return -ENODEV;
+
+	if (!of_device_is_available(mdio_node)) {
+		ret = -ENODEV;
+		goto out_put_node;
+	}
+
+	priv->mii = devm_mdiobus_alloc(dev);
+	if (!priv->mii) {
+		ret = -ENOMEM;
+		goto out_put_node;
+	}
+
+	snprintf(priv->mii->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
+	priv->mii->name = "mtk-mac-mdio";
+	priv->mii->parent = dev;
+	priv->mii->read = mtk_mac_mdio_read;
+	priv->mii->write = mtk_mac_mdio_write;
+	priv->mii->priv = priv;
+
+	ret = of_mdiobus_register(priv->mii, mdio_node);
+
+out_put_node:
+	of_node_put(mdio_node);
+	return ret;
+}
+
+static int mtk_mac_suspend(struct device *dev)
+{
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+
+	ndev = dev_get_drvdata(dev);
+	priv = netdev_priv(ndev);
+
+	mtk_mac_disable(ndev);
+	clk_bulk_disable_unprepare(MTK_MAC_NCLKS, priv->clks);
+
+	return 0;
+}
+
+static int mtk_mac_resume(struct device *dev)
+{
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+	int ret;
+
+	ndev = dev_get_drvdata(dev);
+	priv = netdev_priv(ndev);
+
+	ret = clk_bulk_prepare_enable(MTK_MAC_NCLKS, priv->clks);
+	if (ret)
+		return ret;
+
+	ret = mtk_mac_enable(ndev);
+	if (ret)
+		clk_bulk_disable_unprepare(MTK_MAC_NCLKS, priv->clks);
+
+	return ret;
+}
+
+static void mtk_mac_clk_disable_unprepare(void *data)
+{
+	struct mtk_mac_priv *priv = data;
+
+	clk_bulk_disable_unprepare(MTK_MAC_NCLKS, priv->clks);
+}
+
+static int mtk_mac_probe(struct platform_device *pdev)
+{
+	struct device_node *of_node;
+	struct mtk_mac_priv *priv;
+	struct net_device *ndev;
+	struct device *dev;
+	void __iomem *base;
+	int ret, i;
+
+	dev = &pdev->dev;
+	of_node = dev->of_node;
+
+	ndev = devm_alloc_etherdev(dev, sizeof(*priv));
+	if (!ndev)
+		return -ENOMEM;
+
+	priv = netdev_priv(ndev);
+	SET_NETDEV_DEV(ndev, dev);
+	platform_set_drvdata(pdev, ndev);
+
+	ndev->min_mtu = ETH_ZLEN;
+	ndev->max_mtu = MTK_MAC_MAX_FRAME_SIZE;
+
+	spin_lock_init(&priv->lock);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* We won't be checking the return values of regmap read & write
+	 * functions. They can only fail for mmio if there's a clock attached
+	 * to regmap which is not the case here.
+	 */
+	priv->regs = devm_regmap_init_mmio(dev, base,
+					   &mtk_mac_regmap_config);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	priv->pericfg = syscon_regmap_lookup_by_phandle(of_node,
+							"mediatek,pericfg");
+	if (IS_ERR(priv->pericfg)) {
+		dev_err(dev, "Failed to lookup the PERICFG syscon\n");
+		return PTR_ERR(priv->pericfg);
+	}
+
+	ndev->irq = platform_get_irq(pdev, 0);
+	if (ndev->irq < 0)
+		return ndev->irq;
+
+	for (i = 0; i < MTK_MAC_NCLKS; i++)
+		priv->clks[i].id = mtk_mac_clk_names[i];
+	ret = devm_clk_bulk_get(dev, MTK_MAC_NCLKS, priv->clks);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(MTK_MAC_NCLKS, priv->clks);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev,
+				       mtk_mac_clk_disable_unprepare, priv);
+	if (ret)
+		return ret;
+
+	ret = of_get_phy_mode(of_node, &priv->phy_intf);
+	if (ret) {
+		return ret;
+	} else if (priv->phy_intf != PHY_INTERFACE_MODE_RMII) {
+		dev_err(dev, "unsupported phy mode: %s\n",
+			phy_modes(priv->phy_intf));
+		return -EINVAL;
+	}
+
+	priv->phy_node = of_parse_phandle(of_node, "phy-handle", 0);
+	if (!priv->phy_node) {
+		dev_err(dev, "failed to retrieve the phy handle from device tree\n");
+		return -ENODEV;
+	}
+
+	mtk_mac_set_mode_rmii(priv);
+
+	dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	priv->ring_base = dmam_alloc_coherent(dev, MTK_MAC_DMA_SIZE,
+					      &priv->dma_addr,
+					      GFP_KERNEL | GFP_DMA);
+	if (!priv->ring_base)
+		return -ENOMEM;
+
+	mtk_mac_nic_disable_pd(priv);
+	mtk_mac_init_config(priv);
+
+	ret = mtk_mac_mdio_init(ndev);
+	if (ret)
+		return ret;
+
+	ret = eth_platform_get_mac_address(dev, ndev->dev_addr);
+	if (ret || !is_valid_ether_addr(ndev->dev_addr))
+		eth_hw_addr_random(ndev);
+
+	ndev->netdev_ops = &mtk_mac_netdev_ops;
+	ndev->ethtool_ops = &mtk_mac_ethtool_ops;
+
+	netif_napi_add(ndev, &priv->napi, mtk_mac_poll, MTK_MAC_NAPI_WEIGHT);
+
+	return devm_register_netdev(dev, ndev);
+}
+
+static const struct of_device_id mtk_mac_of_match[] = {
+	{ .compatible = "mediatek,mt8516-eth", },
+	{ .compatible = "mediatek,mt8518-eth", },
+	{ .compatible = "mediatek,mt8175-eth", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mtk_mac_of_match);
+
+static SIMPLE_DEV_PM_OPS(mtk_mac_pm_ops,
+			 mtk_mac_suspend, mtk_mac_resume);
+
+static struct platform_driver mtk_mac_driver = {
+	.driver = {
+		.name = MTK_MAC_DRVNAME,
+		.pm = &mtk_mac_pm_ops,
+		.of_match_table = of_match_ptr(mtk_mac_of_match),
+	},
+	.probe = mtk_mac_probe,
+};
+module_platform_driver(mtk_mac_driver);
+
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_DESCRIPTION("Mediatek Ethernet MAC Driver");
+MODULE_LICENSE("GPL");
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 10/14] ARM64: dts: mediatek: add pericfg syscon to mt8516.dtsi

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds support for the PERICFG register range as a syscon. This will
soon be used by the MediaTek Ethernet MAC driver for NIC configuration.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index 2f8adf042195..8cedaf74ae86 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -191,6 +191,11 @@ infracfg: infracfg@10001000 {
 			#clock-cells = <1>;
 		};
 
+		pericfg: pericfg@10003050 {
+			compatible = "mediatek,mt8516-pericfg", "syscon";
+			reg = <0 0x10003050 0 0x1000>;
+		};
+
 		apmixedsys: apmixedsys@10018000 {
 			compatible = "mediatek,mt8516-apmixedsys", "syscon";
 			reg = <0 0x10018000 0 0x710>;
-- 
2.25.0

[PATCH v2 10/14] ARM64: dts: mediatek: add pericfg syscon to mt8516.dtsi

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds support for the PERICFG register range as a syscon. This will
soon be used by the MediaTek Ethernet MAC driver for NIC configuration.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index 2f8adf042195..8cedaf74ae86 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -191,6 +191,11 @@ infracfg: infracfg@10001000 {
 			#clock-cells = <1>;
 		};
 
+		pericfg: pericfg@10003050 {
+			compatible = "mediatek,mt8516-pericfg", "syscon";
+			reg = <0 0x10003050 0 0x1000>;
+		};
+
 		apmixedsys: apmixedsys@10018000 {
 			compatible = "mediatek,mt8516-apmixedsys", "syscon";
 			reg = <0 0x10018000 0 0x710>;
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 10/14] ARM64: dts: mediatek: add pericfg syscon to mt8516.dtsi

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This adds support for the PERICFG register range as a syscon. This will
soon be used by the MediaTek Ethernet MAC driver for NIC configuration.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index 2f8adf042195..8cedaf74ae86 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -191,6 +191,11 @@ infracfg: infracfg@10001000 {
 			#clock-cells = <1>;
 		};
 
+		pericfg: pericfg@10003050 {
+			compatible = "mediatek,mt8516-pericfg", "syscon";
+			reg = <0 0x10003050 0 0x1000>;
+		};
+
 		apmixedsys: apmixedsys@10018000 {
 			compatible = "mediatek,mt8516-apmixedsys", "syscon";
 			reg = <0 0x10018000 0 0x710>;
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 11/14] ARM64: dts: mediatek: add the ethernet node to mt8516.dtsi

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add the Ethernet MAC node to mt8516.dtsi. This defines parameters common
to all the boards based on this SoC.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index 8cedaf74ae86..89af661e7f63 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -406,6 +406,18 @@ mmc2: mmc@11170000 {
 			status = "disabled";
 		};
 
+		ethernet: ethernet@11180000 {
+			compatible = "mediatek,mt8516-eth";
+			reg = <0 0x11180000 0 0x1000>;
+			mediatek,pericfg = <&pericfg>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_RG_ETH>,
+				 <&topckgen CLK_TOP_66M_ETH>,
+				 <&topckgen CLK_TOP_133M_ETH>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
 		rng: rng@1020c000 {
 			compatible = "mediatek,mt8516-rng",
 				     "mediatek,mt7623-rng";
-- 
2.25.0

[PATCH v2 11/14] ARM64: dts: mediatek: add the ethernet node to mt8516.dtsi

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add the Ethernet MAC node to mt8516.dtsi. This defines parameters common
to all the boards based on this SoC.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index 8cedaf74ae86..89af661e7f63 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -406,6 +406,18 @@ mmc2: mmc@11170000 {
 			status = "disabled";
 		};
 
+		ethernet: ethernet@11180000 {
+			compatible = "mediatek,mt8516-eth";
+			reg = <0 0x11180000 0 0x1000>;
+			mediatek,pericfg = <&pericfg>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_RG_ETH>,
+				 <&topckgen CLK_TOP_66M_ETH>,
+				 <&topckgen CLK_TOP_133M_ETH>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
 		rng: rng@1020c000 {
 			compatible = "mediatek,mt8516-rng",
 				     "mediatek,mt7623-rng";
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 11/14] ARM64: dts: mediatek: add the ethernet node to mt8516.dtsi

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add the Ethernet MAC node to mt8516.dtsi. This defines parameters common
to all the boards based on this SoC.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8516.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index 8cedaf74ae86..89af661e7f63 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -406,6 +406,18 @@ mmc2: mmc@11170000 {
 			status = "disabled";
 		};
 
+		ethernet: ethernet@11180000 {
+			compatible = "mediatek,mt8516-eth";
+			reg = <0 0x11180000 0 0x1000>;
+			mediatek,pericfg = <&pericfg>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_RG_ETH>,
+				 <&topckgen CLK_TOP_66M_ETH>,
+				 <&topckgen CLK_TOP_133M_ETH>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
 		rng: rng@1020c000 {
 			compatible = "mediatek,mt8516-rng",
 				     "mediatek,mt7623-rng";
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 12/14] ARM64: dts: mediatek: add an alias for ethernet0 for pumpkin boards

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add the ethernet0 alias for ethernet so that u-boot can find this node
and fill in the MAC address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index a31093d7142b..97d9b000c37e 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -9,6 +9,7 @@
 / {
 	aliases {
 		serial0 = &uart0;
+		ethernet0 = &ethernet;
 	};
 
 	chosen {
-- 
2.25.0

[PATCH v2 12/14] ARM64: dts: mediatek: add an alias for ethernet0 for pumpkin boards

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add the ethernet0 alias for ethernet so that u-boot can find this node
and fill in the MAC address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index a31093d7142b..97d9b000c37e 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -9,6 +9,7 @@
 / {
 	aliases {
 		serial0 = &uart0;
+		ethernet0 = &ethernet;
 	};
 
 	chosen {
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 12/14] ARM64: dts: mediatek: add an alias for ethernet0 for pumpkin boards

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add the ethernet0 alias for ethernet so that u-boot can find this node
and fill in the MAC address.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index a31093d7142b..97d9b000c37e 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -9,6 +9,7 @@
 / {
 	aliases {
 		serial0 = &uart0;
+		ethernet0 = &ethernet;
 	};
 
 	chosen {
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 13/14] ARM64: dts: mediatek: add ethernet pins for pumpkin boards

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Setup the pin control for the Ethernet MAC.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 97d9b000c37e..4b1d5f69aba6 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -219,4 +219,19 @@ gpio_mux_int_n_pin {
 			bias-pull-up;
 		};
 	};
+
+	ethernet_pins_default: ethernet {
+		pins_ethernet {
+			pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
+				 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
+				 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
+				 <MT8516_PIN_6_EINT6__FUNC_EXT_RXC>,
+				 <MT8516_PIN_7_EINT7__FUNC_EXT_RXDV>,
+				 <MT8516_PIN_8_EINT8__FUNC_EXT_RXD0>,
+				 <MT8516_PIN_9_EINT9__FUNC_EXT_RXD1>,
+				 <MT8516_PIN_12_EINT12__FUNC_EXT_TXEN>,
+				 <MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO>,
+				 <MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC>;
+		};
+	};
 };
-- 
2.25.0

[PATCH v2 13/14] ARM64: dts: mediatek: add ethernet pins for pumpkin boards

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Setup the pin control for the Ethernet MAC.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 97d9b000c37e..4b1d5f69aba6 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -219,4 +219,19 @@ gpio_mux_int_n_pin {
 			bias-pull-up;
 		};
 	};
+
+	ethernet_pins_default: ethernet {
+		pins_ethernet {
+			pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
+				 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
+				 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
+				 <MT8516_PIN_6_EINT6__FUNC_EXT_RXC>,
+				 <MT8516_PIN_7_EINT7__FUNC_EXT_RXDV>,
+				 <MT8516_PIN_8_EINT8__FUNC_EXT_RXD0>,
+				 <MT8516_PIN_9_EINT9__FUNC_EXT_RXD1>,
+				 <MT8516_PIN_12_EINT12__FUNC_EXT_TXEN>,
+				 <MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO>,
+				 <MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC>;
+		};
+	};
 };
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 13/14] ARM64: dts: mediatek: add ethernet pins for pumpkin boards

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Setup the pin control for the Ethernet MAC.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 97d9b000c37e..4b1d5f69aba6 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -219,4 +219,19 @@ gpio_mux_int_n_pin {
 			bias-pull-up;
 		};
 	};
+
+	ethernet_pins_default: ethernet {
+		pins_ethernet {
+			pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
+				 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
+				 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
+				 <MT8516_PIN_6_EINT6__FUNC_EXT_RXC>,
+				 <MT8516_PIN_7_EINT7__FUNC_EXT_RXDV>,
+				 <MT8516_PIN_8_EINT8__FUNC_EXT_RXD0>,
+				 <MT8516_PIN_9_EINT9__FUNC_EXT_RXD1>,
+				 <MT8516_PIN_12_EINT12__FUNC_EXT_TXEN>,
+				 <MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO>,
+				 <MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC>;
+		};
+	};
 };
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 14/14] ARM64: dts: mediatek: enable ethernet on pumpkin boards

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add remaining properties to the ethernet node and enable it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../boot/dts/mediatek/pumpkin-common.dtsi      | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 4b1d5f69aba6..dfceffe6950a 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -167,6 +167,24 @@ &uart0 {
 	status = "okay";
 };
 
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins_default>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rmii";
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
 &usb0 {
 	status = "okay";
 	dr_mode = "peripheral";
-- 
2.25.0

[PATCH v2 14/14] ARM64: dts: mediatek: enable ethernet on pumpkin boards

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add remaining properties to the ethernet node and enable it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../boot/dts/mediatek/pumpkin-common.dtsi      | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 4b1d5f69aba6..dfceffe6950a 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -167,6 +167,24 @@ &uart0 {
 	status = "okay";
 };
 
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins_default>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rmii";
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
 &usb0 {
 	status = "okay";
 	dr_mode = "peripheral";
-- 
2.25.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH v2 14/14] ARM64: dts: mediatek: enable ethernet on pumpkin boards

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add remaining properties to the ethernet node and enable it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../boot/dts/mediatek/pumpkin-common.dtsi      | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 4b1d5f69aba6..dfceffe6950a 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -167,6 +167,24 @@ &uart0 {
 	status = "okay";
 };
 
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins_default>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rmii";
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
 &usb0 {
 	status = "okay";
 	dr_mode = "peripheral";
-- 
2.25.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[Andrew Lunn]

On Mon, May 11, 2020 at 05:07:50PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Appropriate amount of extra memory for private data is allocated at
> the end of struct net_device. We have a helper - netdev_priv() - that
> returns its address but we don't have the reverse: a function which
> given the address of the private data, returns the address of struct
> net_device.
> 
> This has caused many drivers to store the pointer to net_device in
> the private data structure, which basically means storing the pointer
> to a structure in this very structure.

To some extent, that is the way it is done now. To do anything else
just makes your driver different and so harder to maintain. Is 4/8
bytes for a pointer really worth being different?
 
	Andrew

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[Andrew Lunn]

On Mon, May 11, 2020 at 05:07:50PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Appropriate amount of extra memory for private data is allocated at
> the end of struct net_device. We have a helper - netdev_priv() - that
> returns its address but we don't have the reverse: a function which
> given the address of the private data, returns the address of struct
> net_device.
> 
> This has caused many drivers to store the pointer to net_device in
> the private data structure, which basically means storing the pointer
> to a structure in this very structure.

To some extent, that is the way it is done now. To do anything else
just makes your driver different and so harder to maintain. Is 4/8
bytes for a pointer really worth being different?
 
	Andrew

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[Andrew Lunn]

On Mon, May 11, 2020 at 05:07:50PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Appropriate amount of extra memory for private data is allocated at
> the end of struct net_device. We have a helper - netdev_priv() - that
> returns its address but we don't have the reverse: a function which
> given the address of the private data, returns the address of struct
> net_device.
> 
> This has caused many drivers to store the pointer to net_device in
> the private data structure, which basically means storing the pointer
> to a structure in this very structure.

To some extent, that is the way it is done now. To do anything else
just makes your driver different and so harder to maintain. Is 4/8
bytes for a pointer really worth being different?
 
	Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 09/14] net: ethernet: mtk-eth-mac: new driver

[Florian Fainelli]

On 5/11/2020 8:07 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> This adds the driver for the MediaTek Ethernet MAC used on the MT8* SoC
> family. For now we only support full-duplex.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

[snip]

> +static int mtk_mac_ring_pop_tail(struct mtk_mac_ring *ring,
> +				 struct mtk_mac_ring_desc_data *desc_data)
> +{
> +	struct mtk_mac_ring_desc *desc = &ring->descs[ring->tail];
> +	unsigned int status;
> +
> +	/* Let the device release the descriptor. */
> +	dma_rmb();
> +	status = desc->status;
> +
> +	if (!(status & MTK_MAC_DESC_BIT_COWN))
> +		return -1;
> +
> +	desc_data->len = status & MTK_MAC_DESC_MSK_LEN;
> +	desc_data->flags = status & ~MTK_MAC_DESC_MSK_LEN;
> +	desc_data->dma_addr = desc->data_ptr;
> +	desc_data->skb = ring->skbs[ring->tail];
> +
> +	desc->data_ptr = 0;
> +	desc->status = MTK_MAC_DESC_BIT_COWN;
> +	if (status & MTK_MAC_DESC_BIT_EOR)
> +		desc->status |= MTK_MAC_DESC_BIT_EOR;

Don't you need a dma_wmb() for the device to observe the new descriptor
here?

[snip]

> +static void mtk_mac_dma_unmap_tx(struct mtk_mac_priv *priv,
> +				 struct mtk_mac_ring_desc_data *desc_data)
> +{
> +	struct device *dev = mtk_mac_get_dev(priv);
> +
> +	return dma_unmap_single(dev, desc_data->dma_addr,
> +				desc_data->len, DMA_TO_DEVICE);

If you stored a pointer to the sk_buff you transmitted, then you would
need an expensive read to the descriptor to determine the address and
length, and you would also not be at the mercy of the HW putting
incorrect values there.

sp
> +static void mtk_mac_dma_init(struct mtk_mac_priv *priv)
> +{
> +	struct mtk_mac_ring_desc *desc;
> +	unsigned int val;
> +	int i;
> +
> +	priv->descs_base = (struct mtk_mac_ring_desc *)priv->ring_base;
> +
> +	for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++) {
> +		desc = &priv->descs_base[i];
> +
> +		memset(desc, 0, sizeof(*desc));
> +		desc->status = MTK_MAC_DESC_BIT_COWN;
> +		if ((i == MTK_MAC_NUM_TX_DESCS - 1) ||
> +		    (i == MTK_MAC_NUM_DESCS_TOTAL - 1))
> +			desc->status |= MTK_MAC_DESC_BIT_EOR;
> +	}
> +
> +	mtk_mac_ring_init(&priv->tx_ring, priv->descs_base, 0);
> +	mtk_mac_ring_init(&priv->rx_ring,
> +			  priv->descs_base + MTK_MAC_NUM_TX_DESCS,
> +			  MTK_MAC_NUM_RX_DESCS);
> +
> +	/* Set DMA pointers. */
> +	val = (unsigned int)priv->dma_addr;

You would probably add a WARN_ON() or something that catches the upper
32-bits of the dma_addr being set, see my comment about the DMA mask
setting.

[snip]

> +static void mtk_mac_tx_complete_all(struct mtk_mac_priv *priv)
> +{
> +	struct net_device *ndev = priv_to_netdev(priv);
> +	struct mtk_mac_ring *ring = &priv->tx_ring;
> +	int ret;
> +
> +	for (;;) {
> +		mtk_mac_lock(priv);
> +
> +		if (!mtk_mac_ring_descs_available(ring)) {
> +			mtk_mac_unlock(priv);
> +			break;
> +		}
> +
> +		ret = mtk_mac_tx_complete_one(priv);
> +		if (ret) {
> +			mtk_mac_unlock(priv);
> +			break;
> +		}
> +
> +		if (netif_queue_stopped(ndev))
> +			netif_wake_queue(ndev);
> +
> +		mtk_mac_unlock(priv);
> +	}

Where do you increment the net_device statistics to indicate the bytes
and packets transmitted?

[snip]

> +	mtk_mac_set_mode_rmii(priv);
> +
> +	dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));

Your code assumes that DMA addresses are not going to be >= 4GB so you
should be checking this function's return code and abort here otherwise
your driver will fail in surprisingly difficult ways to debug.
-- 
Florian

Re: [PATCH v2 09/14] net: ethernet: mtk-eth-mac: new driver

[Florian Fainelli]

On 5/11/2020 8:07 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> This adds the driver for the MediaTek Ethernet MAC used on the MT8* SoC
> family. For now we only support full-duplex.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

[snip]

> +static int mtk_mac_ring_pop_tail(struct mtk_mac_ring *ring,
> +				 struct mtk_mac_ring_desc_data *desc_data)
> +{
> +	struct mtk_mac_ring_desc *desc = &ring->descs[ring->tail];
> +	unsigned int status;
> +
> +	/* Let the device release the descriptor. */
> +	dma_rmb();
> +	status = desc->status;
> +
> +	if (!(status & MTK_MAC_DESC_BIT_COWN))
> +		return -1;
> +
> +	desc_data->len = status & MTK_MAC_DESC_MSK_LEN;
> +	desc_data->flags = status & ~MTK_MAC_DESC_MSK_LEN;
> +	desc_data->dma_addr = desc->data_ptr;
> +	desc_data->skb = ring->skbs[ring->tail];
> +
> +	desc->data_ptr = 0;
> +	desc->status = MTK_MAC_DESC_BIT_COWN;
> +	if (status & MTK_MAC_DESC_BIT_EOR)
> +		desc->status |= MTK_MAC_DESC_BIT_EOR;

Don't you need a dma_wmb() for the device to observe the new descriptor
here?

[snip]

> +static void mtk_mac_dma_unmap_tx(struct mtk_mac_priv *priv,
> +				 struct mtk_mac_ring_desc_data *desc_data)
> +{
> +	struct device *dev = mtk_mac_get_dev(priv);
> +
> +	return dma_unmap_single(dev, desc_data->dma_addr,
> +				desc_data->len, DMA_TO_DEVICE);

If you stored a pointer to the sk_buff you transmitted, then you would
need an expensive read to the descriptor to determine the address and
length, and you would also not be at the mercy of the HW putting
incorrect values there.

sp
> +static void mtk_mac_dma_init(struct mtk_mac_priv *priv)
> +{
> +	struct mtk_mac_ring_desc *desc;
> +	unsigned int val;
> +	int i;
> +
> +	priv->descs_base = (struct mtk_mac_ring_desc *)priv->ring_base;
> +
> +	for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++) {
> +		desc = &priv->descs_base[i];
> +
> +		memset(desc, 0, sizeof(*desc));
> +		desc->status = MTK_MAC_DESC_BIT_COWN;
> +		if ((i == MTK_MAC_NUM_TX_DESCS - 1) ||
> +		    (i == MTK_MAC_NUM_DESCS_TOTAL - 1))
> +			desc->status |= MTK_MAC_DESC_BIT_EOR;
> +	}
> +
> +	mtk_mac_ring_init(&priv->tx_ring, priv->descs_base, 0);
> +	mtk_mac_ring_init(&priv->rx_ring,
> +			  priv->descs_base + MTK_MAC_NUM_TX_DESCS,
> +			  MTK_MAC_NUM_RX_DESCS);
> +
> +	/* Set DMA pointers. */
> +	val = (unsigned int)priv->dma_addr;

You would probably add a WARN_ON() or something that catches the upper
32-bits of the dma_addr being set, see my comment about the DMA mask
setting.

[snip]

> +static void mtk_mac_tx_complete_all(struct mtk_mac_priv *priv)
> +{
> +	struct net_device *ndev = priv_to_netdev(priv);
> +	struct mtk_mac_ring *ring = &priv->tx_ring;
> +	int ret;
> +
> +	for (;;) {
> +		mtk_mac_lock(priv);
> +
> +		if (!mtk_mac_ring_descs_available(ring)) {
> +			mtk_mac_unlock(priv);
> +			break;
> +		}
> +
> +		ret = mtk_mac_tx_complete_one(priv);
> +		if (ret) {
> +			mtk_mac_unlock(priv);
> +			break;
> +		}
> +
> +		if (netif_queue_stopped(ndev))
> +			netif_wake_queue(ndev);
> +
> +		mtk_mac_unlock(priv);
> +	}

Where do you increment the net_device statistics to indicate the bytes
and packets transmitted?

[snip]

> +	mtk_mac_set_mode_rmii(priv);
> +
> +	dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));

Your code assumes that DMA addresses are not going to be >= 4GB so you
should be checking this function's return code and abort here otherwise
your driver will fail in surprisingly difficult ways to debug.
-- 
Florian

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 09/14] net: ethernet: mtk-eth-mac: new driver

[Florian Fainelli]

On 5/11/2020 8:07 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> This adds the driver for the MediaTek Ethernet MAC used on the MT8* SoC
> family. For now we only support full-duplex.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---

[snip]

> +static int mtk_mac_ring_pop_tail(struct mtk_mac_ring *ring,
> +				 struct mtk_mac_ring_desc_data *desc_data)
> +{
> +	struct mtk_mac_ring_desc *desc = &ring->descs[ring->tail];
> +	unsigned int status;
> +
> +	/* Let the device release the descriptor. */
> +	dma_rmb();
> +	status = desc->status;
> +
> +	if (!(status & MTK_MAC_DESC_BIT_COWN))
> +		return -1;
> +
> +	desc_data->len = status & MTK_MAC_DESC_MSK_LEN;
> +	desc_data->flags = status & ~MTK_MAC_DESC_MSK_LEN;
> +	desc_data->dma_addr = desc->data_ptr;
> +	desc_data->skb = ring->skbs[ring->tail];
> +
> +	desc->data_ptr = 0;
> +	desc->status = MTK_MAC_DESC_BIT_COWN;
> +	if (status & MTK_MAC_DESC_BIT_EOR)
> +		desc->status |= MTK_MAC_DESC_BIT_EOR;

Don't you need a dma_wmb() for the device to observe the new descriptor
here?

[snip]

> +static void mtk_mac_dma_unmap_tx(struct mtk_mac_priv *priv,
> +				 struct mtk_mac_ring_desc_data *desc_data)
> +{
> +	struct device *dev = mtk_mac_get_dev(priv);
> +
> +	return dma_unmap_single(dev, desc_data->dma_addr,
> +				desc_data->len, DMA_TO_DEVICE);

If you stored a pointer to the sk_buff you transmitted, then you would
need an expensive read to the descriptor to determine the address and
length, and you would also not be at the mercy of the HW putting
incorrect values there.

sp
> +static void mtk_mac_dma_init(struct mtk_mac_priv *priv)
> +{
> +	struct mtk_mac_ring_desc *desc;
> +	unsigned int val;
> +	int i;
> +
> +	priv->descs_base = (struct mtk_mac_ring_desc *)priv->ring_base;
> +
> +	for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++) {
> +		desc = &priv->descs_base[i];
> +
> +		memset(desc, 0, sizeof(*desc));
> +		desc->status = MTK_MAC_DESC_BIT_COWN;
> +		if ((i == MTK_MAC_NUM_TX_DESCS - 1) ||
> +		    (i == MTK_MAC_NUM_DESCS_TOTAL - 1))
> +			desc->status |= MTK_MAC_DESC_BIT_EOR;
> +	}
> +
> +	mtk_mac_ring_init(&priv->tx_ring, priv->descs_base, 0);
> +	mtk_mac_ring_init(&priv->rx_ring,
> +			  priv->descs_base + MTK_MAC_NUM_TX_DESCS,
> +			  MTK_MAC_NUM_RX_DESCS);
> +
> +	/* Set DMA pointers. */
> +	val = (unsigned int)priv->dma_addr;

You would probably add a WARN_ON() or something that catches the upper
32-bits of the dma_addr being set, see my comment about the DMA mask
setting.

[snip]

> +static void mtk_mac_tx_complete_all(struct mtk_mac_priv *priv)
> +{
> +	struct net_device *ndev = priv_to_netdev(priv);
> +	struct mtk_mac_ring *ring = &priv->tx_ring;
> +	int ret;
> +
> +	for (;;) {
> +		mtk_mac_lock(priv);
> +
> +		if (!mtk_mac_ring_descs_available(ring)) {
> +			mtk_mac_unlock(priv);
> +			break;
> +		}
> +
> +		ret = mtk_mac_tx_complete_one(priv);
> +		if (ret) {
> +			mtk_mac_unlock(priv);
> +			break;
> +		}
> +
> +		if (netif_queue_stopped(ndev))
> +			netif_wake_queue(ndev);
> +
> +		mtk_mac_unlock(priv);
> +	}

Where do you increment the net_device statistics to indicate the bytes
and packets transmitted?

[snip]

> +	mtk_mac_set_mode_rmii(priv);
> +
> +	dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));

Your code assumes that DMA addresses are not going to be >= 4GB so you
should be checking this function's return code and abort here otherwise
your driver will fail in surprisingly difficult ways to debug.
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[David Miller]

From: Bartosz Golaszewski <brgl@bgdev.pl>
Date: Mon, 11 May 2020 17:07:50 +0200

> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Appropriate amount of extra memory for private data is allocated at
> the end of struct net_device. We have a helper - netdev_priv() - that
> returns its address but we don't have the reverse: a function which
> given the address of the private data, returns the address of struct
> net_device.
> 
> This has caused many drivers to store the pointer to net_device in
> the private data structure, which basically means storing the pointer
> to a structure in this very structure.
> 
> This patch proposes to add priv_to_netdev() - a helper which converts
> the address of the private data to the address of the associated
> net_device.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Sorry, please don't do this.  We had this almost two decades ago and
explicitly removed it intentionally.

Store the back pointer in your software state just like everyone else
does.

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[David Miller]

From: Bartosz Golaszewski <brgl@bgdev.pl>
Date: Mon, 11 May 2020 17:07:50 +0200

> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Appropriate amount of extra memory for private data is allocated at
> the end of struct net_device. We have a helper - netdev_priv() - that
> returns its address but we don't have the reverse: a function which
> given the address of the private data, returns the address of struct
> net_device.
> 
> This has caused many drivers to store the pointer to net_device in
> the private data structure, which basically means storing the pointer
> to a structure in this very structure.
> 
> This patch proposes to add priv_to_netdev() - a helper which converts
> the address of the private data to the address of the associated
> net_device.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Sorry, please don't do this.  We had this almost two decades ago and
explicitly removed it intentionally.

Store the back pointer in your software state just like everyone else
does.

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[David Miller]

From: Bartosz Golaszewski <brgl@bgdev.pl>
Date: Mon, 11 May 2020 17:07:50 +0200

> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Appropriate amount of extra memory for private data is allocated at
> the end of struct net_device. We have a helper - netdev_priv() - that
> returns its address but we don't have the reverse: a function which
> given the address of the private data, returns the address of struct
> net_device.
> 
> This has caused many drivers to store the pointer to net_device in
> the private data structure, which basically means storing the pointer
> to a structure in this very structure.
> 
> This patch proposes to add priv_to_netdev() - a helper which converts
> the address of the private data to the address of the associated
> net_device.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Sorry, please don't do this.  We had this almost two decades ago and
explicitly removed it intentionally.

Store the back pointer in your software state just like everyone else
does.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[Bartosz Golaszewski]

pon., 11 maj 2020 o 22:41 David Miller <davem@davemloft.net> napisał(a):
>
> From: Bartosz Golaszewski <brgl@bgdev.pl>
> Date: Mon, 11 May 2020 17:07:50 +0200
>
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > Appropriate amount of extra memory for private data is allocated at
> > the end of struct net_device. We have a helper - netdev_priv() - that
> > returns its address but we don't have the reverse: a function which
> > given the address of the private data, returns the address of struct
> > net_device.
> >
> > This has caused many drivers to store the pointer to net_device in
> > the private data structure, which basically means storing the pointer
> > to a structure in this very structure.
> >
> > This patch proposes to add priv_to_netdev() - a helper which converts
> > the address of the private data to the address of the associated
> > net_device.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> Sorry, please don't do this.  We had this almost two decades ago and
> explicitly removed it intentionally.
>
> Store the back pointer in your software state just like everyone else
> does.

I will if you insist but would you mind sharing some details on why it
was removed? To me it still makes more sense than storing the pointer
to a structure in *that* structure.

Bart

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[Bartosz Golaszewski]

pon., 11 maj 2020 o 22:41 David Miller <davem@davemloft.net> napisał(a):
>
> From: Bartosz Golaszewski <brgl@bgdev.pl>
> Date: Mon, 11 May 2020 17:07:50 +0200
>
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > Appropriate amount of extra memory for private data is allocated at
> > the end of struct net_device. We have a helper - netdev_priv() - that
> > returns its address but we don't have the reverse: a function which
> > given the address of the private data, returns the address of struct
> > net_device.
> >
> > This has caused many drivers to store the pointer to net_device in
> > the private data structure, which basically means storing the pointer
> > to a structure in this very structure.
> >
> > This patch proposes to add priv_to_netdev() - a helper which converts
> > the address of the private data to the address of the associated
> > net_device.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> Sorry, please don't do this.  We had this almost two decades ago and
> explicitly removed it intentionally.
>
> Store the back pointer in your software state just like everyone else
> does.

I will if you insist but would you mind sharing some details on why it
was removed? To me it still makes more sense than storing the pointer
to a structure in *that* structure.

Bart

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[Bartosz Golaszewski]

pon., 11 maj 2020 o 22:41 David Miller <davem@davemloft.net> napisał(a):
>
> From: Bartosz Golaszewski <brgl@bgdev.pl>
> Date: Mon, 11 May 2020 17:07:50 +0200
>
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > Appropriate amount of extra memory for private data is allocated at
> > the end of struct net_device. We have a helper - netdev_priv() - that
> > returns its address but we don't have the reverse: a function which
> > given the address of the private data, returns the address of struct
> > net_device.
> >
> > This has caused many drivers to store the pointer to net_device in
> > the private data structure, which basically means storing the pointer
> > to a structure in this very structure.
> >
> > This patch proposes to add priv_to_netdev() - a helper which converts
> > the address of the private data to the address of the associated
> > net_device.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> Sorry, please don't do this.  We had this almost two decades ago and
> explicitly removed it intentionally.
>
> Store the back pointer in your software state just like everyone else
> does.

I will if you insist but would you mind sharing some details on why it
was removed? To me it still makes more sense than storing the pointer
to a structure in *that* structure.

Bart

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 09/14] net: ethernet: mtk-eth-mac: new driver

[Bartosz Golaszewski]

pon., 11 maj 2020 o 21:24 Florian Fainelli <f.fainelli@gmail.com> napisał(a):
>
>
>
> On 5/11/2020 8:07 AM, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > This adds the driver for the MediaTek Ethernet MAC used on the MT8* SoC
> > family. For now we only support full-duplex.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
>
> [snip]
>
> > +static int mtk_mac_ring_pop_tail(struct mtk_mac_ring *ring,
> > +                              struct mtk_mac_ring_desc_data *desc_data)
> > +{
> > +     struct mtk_mac_ring_desc *desc = &ring->descs[ring->tail];
> > +     unsigned int status;
> > +
> > +     /* Let the device release the descriptor. */
> > +     dma_rmb();
> > +     status = desc->status;
> > +
> > +     if (!(status & MTK_MAC_DESC_BIT_COWN))
> > +             return -1;
> > +
> > +     desc_data->len = status & MTK_MAC_DESC_MSK_LEN;
> > +     desc_data->flags = status & ~MTK_MAC_DESC_MSK_LEN;
> > +     desc_data->dma_addr = desc->data_ptr;
> > +     desc_data->skb = ring->skbs[ring->tail];
> > +
> > +     desc->data_ptr = 0;
> > +     desc->status = MTK_MAC_DESC_BIT_COWN;
> > +     if (status & MTK_MAC_DESC_BIT_EOR)
> > +             desc->status |= MTK_MAC_DESC_BIT_EOR;
>
> Don't you need a dma_wmb() for the device to observe the new descriptor
> here?
>

HW has released the descriptor (set the COWN bit) and I just clear all
other bits here really. Yeah, I guess it won't hurt to make sure.

> [snip]
>
> > +static void mtk_mac_dma_unmap_tx(struct mtk_mac_priv *priv,
> > +                              struct mtk_mac_ring_desc_data *desc_data)
> > +{
> > +     struct device *dev = mtk_mac_get_dev(priv);
> > +
> > +     return dma_unmap_single(dev, desc_data->dma_addr,
> > +                             desc_data->len, DMA_TO_DEVICE);
>
> If you stored a pointer to the sk_buff you transmitted, then you would
> need an expensive read to the descriptor to determine the address and
> length, and you would also not be at the mercy of the HW putting
> incorrect values there.
>

You mean store the mapped addresses? Yeah I can do that but I'll still
need to read the descriptor memory to verify it was released by HW.

> sp
> > +static void mtk_mac_dma_init(struct mtk_mac_priv *priv)
> > +{
> > +     struct mtk_mac_ring_desc *desc;
> > +     unsigned int val;
> > +     int i;
> > +
> > +     priv->descs_base = (struct mtk_mac_ring_desc *)priv->ring_base;
> > +
> > +     for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++) {
> > +             desc = &priv->descs_base[i];
> > +
> > +             memset(desc, 0, sizeof(*desc));
> > +             desc->status = MTK_MAC_DESC_BIT_COWN;
> > +             if ((i == MTK_MAC_NUM_TX_DESCS - 1) ||
> > +                 (i == MTK_MAC_NUM_DESCS_TOTAL - 1))
> > +                     desc->status |= MTK_MAC_DESC_BIT_EOR;
> > +     }
> > +
> > +     mtk_mac_ring_init(&priv->tx_ring, priv->descs_base, 0);
> > +     mtk_mac_ring_init(&priv->rx_ring,
> > +                       priv->descs_base + MTK_MAC_NUM_TX_DESCS,
> > +                       MTK_MAC_NUM_RX_DESCS);
> > +
> > +     /* Set DMA pointers. */
> > +     val = (unsigned int)priv->dma_addr;
>
> You would probably add a WARN_ON() or something that catches the upper
> 32-bits of the dma_addr being set, see my comment about the DMA mask
> setting.
>

Can it still happen if I check the return value of dma_set_mask_and_coherent()?

> [snip]
>
> > +static void mtk_mac_tx_complete_all(struct mtk_mac_priv *priv)
> > +{
> > +     struct net_device *ndev = priv_to_netdev(priv);
> > +     struct mtk_mac_ring *ring = &priv->tx_ring;
> > +     int ret;
> > +
> > +     for (;;) {
> > +             mtk_mac_lock(priv);
> > +
> > +             if (!mtk_mac_ring_descs_available(ring)) {
> > +                     mtk_mac_unlock(priv);
> > +                     break;
> > +             }
> > +
> > +             ret = mtk_mac_tx_complete_one(priv);
> > +             if (ret) {
> > +                     mtk_mac_unlock(priv);
> > +                     break;
> > +             }
> > +
> > +             if (netif_queue_stopped(ndev))
> > +                     netif_wake_queue(ndev);
> > +
> > +             mtk_mac_unlock(priv);
> > +     }
>
> Where do you increment the net_device statistics to indicate the bytes
> and packets transmitted?
>

I don't. I use the counters provided by HW for that.

> [snip]
>
> > +     mtk_mac_set_mode_rmii(priv);
> > +
> > +     dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
>
> Your code assumes that DMA addresses are not going to be >= 4GB so you
> should be checking this function's return code and abort here otherwise
> your driver will fail in surprisingly difficult ways to debug.

Sure, thanks.

Bart

Re: [PATCH v2 09/14] net: ethernet: mtk-eth-mac: new driver

[Bartosz Golaszewski]

pon., 11 maj 2020 o 21:24 Florian Fainelli <f.fainelli@gmail.com> napisał(a):
>
>
>
> On 5/11/2020 8:07 AM, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > This adds the driver for the MediaTek Ethernet MAC used on the MT8* SoC
> > family. For now we only support full-duplex.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
>
> [snip]
>
> > +static int mtk_mac_ring_pop_tail(struct mtk_mac_ring *ring,
> > +                              struct mtk_mac_ring_desc_data *desc_data)
> > +{
> > +     struct mtk_mac_ring_desc *desc = &ring->descs[ring->tail];
> > +     unsigned int status;
> > +
> > +     /* Let the device release the descriptor. */
> > +     dma_rmb();
> > +     status = desc->status;
> > +
> > +     if (!(status & MTK_MAC_DESC_BIT_COWN))
> > +             return -1;
> > +
> > +     desc_data->len = status & MTK_MAC_DESC_MSK_LEN;
> > +     desc_data->flags = status & ~MTK_MAC_DESC_MSK_LEN;
> > +     desc_data->dma_addr = desc->data_ptr;
> > +     desc_data->skb = ring->skbs[ring->tail];
> > +
> > +     desc->data_ptr = 0;
> > +     desc->status = MTK_MAC_DESC_BIT_COWN;
> > +     if (status & MTK_MAC_DESC_BIT_EOR)
> > +             desc->status |= MTK_MAC_DESC_BIT_EOR;
>
> Don't you need a dma_wmb() for the device to observe the new descriptor
> here?
>

HW has released the descriptor (set the COWN bit) and I just clear all
other bits here really. Yeah, I guess it won't hurt to make sure.

> [snip]
>
> > +static void mtk_mac_dma_unmap_tx(struct mtk_mac_priv *priv,
> > +                              struct mtk_mac_ring_desc_data *desc_data)
> > +{
> > +     struct device *dev = mtk_mac_get_dev(priv);
> > +
> > +     return dma_unmap_single(dev, desc_data->dma_addr,
> > +                             desc_data->len, DMA_TO_DEVICE);
>
> If you stored a pointer to the sk_buff you transmitted, then you would
> need an expensive read to the descriptor to determine the address and
> length, and you would also not be at the mercy of the HW putting
> incorrect values there.
>

You mean store the mapped addresses? Yeah I can do that but I'll still
need to read the descriptor memory to verify it was released by HW.

> sp
> > +static void mtk_mac_dma_init(struct mtk_mac_priv *priv)
> > +{
> > +     struct mtk_mac_ring_desc *desc;
> > +     unsigned int val;
> > +     int i;
> > +
> > +     priv->descs_base = (struct mtk_mac_ring_desc *)priv->ring_base;
> > +
> > +     for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++) {
> > +             desc = &priv->descs_base[i];
> > +
> > +             memset(desc, 0, sizeof(*desc));
> > +             desc->status = MTK_MAC_DESC_BIT_COWN;
> > +             if ((i == MTK_MAC_NUM_TX_DESCS - 1) ||
> > +                 (i == MTK_MAC_NUM_DESCS_TOTAL - 1))
> > +                     desc->status |= MTK_MAC_DESC_BIT_EOR;
> > +     }
> > +
> > +     mtk_mac_ring_init(&priv->tx_ring, priv->descs_base, 0);
> > +     mtk_mac_ring_init(&priv->rx_ring,
> > +                       priv->descs_base + MTK_MAC_NUM_TX_DESCS,
> > +                       MTK_MAC_NUM_RX_DESCS);
> > +
> > +     /* Set DMA pointers. */
> > +     val = (unsigned int)priv->dma_addr;
>
> You would probably add a WARN_ON() or something that catches the upper
> 32-bits of the dma_addr being set, see my comment about the DMA mask
> setting.
>

Can it still happen if I check the return value of dma_set_mask_and_coherent()?

> [snip]
>
> > +static void mtk_mac_tx_complete_all(struct mtk_mac_priv *priv)
> > +{
> > +     struct net_device *ndev = priv_to_netdev(priv);
> > +     struct mtk_mac_ring *ring = &priv->tx_ring;
> > +     int ret;
> > +
> > +     for (;;) {
> > +             mtk_mac_lock(priv);
> > +
> > +             if (!mtk_mac_ring_descs_available(ring)) {
> > +                     mtk_mac_unlock(priv);
> > +                     break;
> > +             }
> > +
> > +             ret = mtk_mac_tx_complete_one(priv);
> > +             if (ret) {
> > +                     mtk_mac_unlock(priv);
> > +                     break;
> > +             }
> > +
> > +             if (netif_queue_stopped(ndev))
> > +                     netif_wake_queue(ndev);
> > +
> > +             mtk_mac_unlock(priv);
> > +     }
>
> Where do you increment the net_device statistics to indicate the bytes
> and packets transmitted?
>

I don't. I use the counters provided by HW for that.

> [snip]
>
> > +     mtk_mac_set_mode_rmii(priv);
> > +
> > +     dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
>
> Your code assumes that DMA addresses are not going to be >= 4GB so you
> should be checking this function's return code and abort here otherwise
> your driver will fail in surprisingly difficult ways to debug.

Sure, thanks.

Bart

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 09/14] net: ethernet: mtk-eth-mac: new driver

[Bartosz Golaszewski]

pon., 11 maj 2020 o 21:24 Florian Fainelli <f.fainelli@gmail.com> napisał(a):
>
>
>
> On 5/11/2020 8:07 AM, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > This adds the driver for the MediaTek Ethernet MAC used on the MT8* SoC
> > family. For now we only support full-duplex.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
>
> [snip]
>
> > +static int mtk_mac_ring_pop_tail(struct mtk_mac_ring *ring,
> > +                              struct mtk_mac_ring_desc_data *desc_data)
> > +{
> > +     struct mtk_mac_ring_desc *desc = &ring->descs[ring->tail];
> > +     unsigned int status;
> > +
> > +     /* Let the device release the descriptor. */
> > +     dma_rmb();
> > +     status = desc->status;
> > +
> > +     if (!(status & MTK_MAC_DESC_BIT_COWN))
> > +             return -1;
> > +
> > +     desc_data->len = status & MTK_MAC_DESC_MSK_LEN;
> > +     desc_data->flags = status & ~MTK_MAC_DESC_MSK_LEN;
> > +     desc_data->dma_addr = desc->data_ptr;
> > +     desc_data->skb = ring->skbs[ring->tail];
> > +
> > +     desc->data_ptr = 0;
> > +     desc->status = MTK_MAC_DESC_BIT_COWN;
> > +     if (status & MTK_MAC_DESC_BIT_EOR)
> > +             desc->status |= MTK_MAC_DESC_BIT_EOR;
>
> Don't you need a dma_wmb() for the device to observe the new descriptor
> here?
>

HW has released the descriptor (set the COWN bit) and I just clear all
other bits here really. Yeah, I guess it won't hurt to make sure.

> [snip]
>
> > +static void mtk_mac_dma_unmap_tx(struct mtk_mac_priv *priv,
> > +                              struct mtk_mac_ring_desc_data *desc_data)
> > +{
> > +     struct device *dev = mtk_mac_get_dev(priv);
> > +
> > +     return dma_unmap_single(dev, desc_data->dma_addr,
> > +                             desc_data->len, DMA_TO_DEVICE);
>
> If you stored a pointer to the sk_buff you transmitted, then you would
> need an expensive read to the descriptor to determine the address and
> length, and you would also not be at the mercy of the HW putting
> incorrect values there.
>

You mean store the mapped addresses? Yeah I can do that but I'll still
need to read the descriptor memory to verify it was released by HW.

> sp
> > +static void mtk_mac_dma_init(struct mtk_mac_priv *priv)
> > +{
> > +     struct mtk_mac_ring_desc *desc;
> > +     unsigned int val;
> > +     int i;
> > +
> > +     priv->descs_base = (struct mtk_mac_ring_desc *)priv->ring_base;
> > +
> > +     for (i = 0; i < MTK_MAC_NUM_DESCS_TOTAL; i++) {
> > +             desc = &priv->descs_base[i];
> > +
> > +             memset(desc, 0, sizeof(*desc));
> > +             desc->status = MTK_MAC_DESC_BIT_COWN;
> > +             if ((i == MTK_MAC_NUM_TX_DESCS - 1) ||
> > +                 (i == MTK_MAC_NUM_DESCS_TOTAL - 1))
> > +                     desc->status |= MTK_MAC_DESC_BIT_EOR;
> > +     }
> > +
> > +     mtk_mac_ring_init(&priv->tx_ring, priv->descs_base, 0);
> > +     mtk_mac_ring_init(&priv->rx_ring,
> > +                       priv->descs_base + MTK_MAC_NUM_TX_DESCS,
> > +                       MTK_MAC_NUM_RX_DESCS);
> > +
> > +     /* Set DMA pointers. */
> > +     val = (unsigned int)priv->dma_addr;
>
> You would probably add a WARN_ON() or something that catches the upper
> 32-bits of the dma_addr being set, see my comment about the DMA mask
> setting.
>

Can it still happen if I check the return value of dma_set_mask_and_coherent()?

> [snip]
>
> > +static void mtk_mac_tx_complete_all(struct mtk_mac_priv *priv)
> > +{
> > +     struct net_device *ndev = priv_to_netdev(priv);
> > +     struct mtk_mac_ring *ring = &priv->tx_ring;
> > +     int ret;
> > +
> > +     for (;;) {
> > +             mtk_mac_lock(priv);
> > +
> > +             if (!mtk_mac_ring_descs_available(ring)) {
> > +                     mtk_mac_unlock(priv);
> > +                     break;
> > +             }
> > +
> > +             ret = mtk_mac_tx_complete_one(priv);
> > +             if (ret) {
> > +                     mtk_mac_unlock(priv);
> > +                     break;
> > +             }
> > +
> > +             if (netif_queue_stopped(ndev))
> > +                     netif_wake_queue(ndev);
> > +
> > +             mtk_mac_unlock(priv);
> > +     }
>
> Where do you increment the net_device statistics to indicate the bytes
> and packets transmitted?
>

I don't. I use the counters provided by HW for that.

> [snip]
>
> > +     mtk_mac_set_mode_rmii(priv);
> > +
> > +     dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
>
> Your code assumes that DMA addresses are not going to be >= 4GB so you
> should be checking this function's return code and abort here otherwise
> your driver will fail in surprisingly difficult ways to debug.

Sure, thanks.

Bart

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[David Miller]

From: Bartosz Golaszewski <brgl@bgdev.pl>
Date: Tue, 12 May 2020 08:04:39 +0200

> I will if you insist but would you mind sharing some details on why it
> was removed? To me it still makes more sense than storing the pointer
> to a structure in *that* structure.

Flexibility in implementation of where the private data is located
and how it is allocated.

And yes, I do insist.

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[David Miller]

From: Bartosz Golaszewski <brgl@bgdev.pl>
Date: Tue, 12 May 2020 08:04:39 +0200

> I will if you insist but would you mind sharing some details on why it
> was removed? To me it still makes more sense than storing the pointer
> to a structure in *that* structure.

Flexibility in implementation of where the private data is located
and how it is allocated.

And yes, I do insist.

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 05/14] net: core: provide priv_to_netdev()

[David Miller]

From: Bartosz Golaszewski <brgl@bgdev.pl>
Date: Tue, 12 May 2020 08:04:39 +0200

> I will if you insist but would you mind sharing some details on why it
> was removed? To me it still makes more sense than storing the pointer
> to a structure in *that* structure.

Flexibility in implementation of where the private data is located
and how it is allocated.

And yes, I do insist.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 01/14] dt-bindings: arm: add a binding document for MediaTek PERICFG controller

[Rob Herring]

On Mon, May 11, 2020 at 05:07:46PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> This adds a binding document for the PERICFG controller present on
> MediaTek SoCs. For now the only variant supported is 'mt8516-pericfg'.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  .../arm/mediatek/mediatek,pericfg.yaml        | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> new file mode 100644
> index 000000000000..74b2a6173ffb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> @@ -0,0 +1,34 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: MediaTek Peripheral Configuration Controller
> +
> +maintainers:
> +  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
> +
> +properties:
> +  compatible:
> +    oneOf:

Don't need oneOf here.

> +      - items:
> +        - enum:
> +          - mediatek,pericfg

Doesn't match the example (which is correct).

> +        - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pericfg: pericfg@10003050 {
> +        compatible = "mediatek,mt8516-pericfg", "syscon";
> +        reg = <0 0x10003050 0 0x1000>;
> +    };
> -- 
> 2.25.0
> 

Re: [PATCH v2 01/14] dt-bindings: arm: add a binding document for MediaTek PERICFG controller

[Rob Herring]

On Mon, May 11, 2020 at 05:07:46PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> This adds a binding document for the PERICFG controller present on
> MediaTek SoCs. For now the only variant supported is 'mt8516-pericfg'.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  .../arm/mediatek/mediatek,pericfg.yaml        | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> new file mode 100644
> index 000000000000..74b2a6173ffb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> @@ -0,0 +1,34 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: MediaTek Peripheral Configuration Controller
> +
> +maintainers:
> +  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
> +
> +properties:
> +  compatible:
> +    oneOf:

Don't need oneOf here.

> +      - items:
> +        - enum:
> +          - mediatek,pericfg

Doesn't match the example (which is correct).

> +        - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pericfg: pericfg@10003050 {
> +        compatible = "mediatek,mt8516-pericfg", "syscon";
> +        reg = <0 0x10003050 0 0x1000>;
> +    };
> -- 
> 2.25.0
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 01/14] dt-bindings: arm: add a binding document for MediaTek PERICFG controller

[Rob Herring]

On Mon, May 11, 2020 at 05:07:46PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> This adds a binding document for the PERICFG controller present on
> MediaTek SoCs. For now the only variant supported is 'mt8516-pericfg'.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  .../arm/mediatek/mediatek,pericfg.yaml        | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> new file mode 100644
> index 000000000000..74b2a6173ffb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> @@ -0,0 +1,34 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: MediaTek Peripheral Configuration Controller
> +
> +maintainers:
> +  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
> +
> +properties:
> +  compatible:
> +    oneOf:

Don't need oneOf here.

> +      - items:
> +        - enum:
> +          - mediatek,pericfg

Doesn't match the example (which is correct).

> +        - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    pericfg: pericfg@10003050 {
> +        compatible = "mediatek,mt8516-pericfg", "syscon";
> +        reg = <0 0x10003050 0 0x1000>;
> +    };
> -- 
> 2.25.0
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 01/14] dt-bindings: arm: add a binding document for MediaTek PERICFG controller

[Bartosz Golaszewski]

wt., 19 maj 2020 o 20:28 Rob Herring <robh@kernel.org> napisał(a):
>
> On Mon, May 11, 2020 at 05:07:46PM +0200, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > This adds a binding document for the PERICFG controller present on
> > MediaTek SoCs. For now the only variant supported is 'mt8516-pericfg'.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
> >  .../arm/mediatek/mediatek,pericfg.yaml        | 34 +++++++++++++++++++
> >  1 file changed, 34 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> > new file mode 100644
> > index 000000000000..74b2a6173ffb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> > @@ -0,0 +1,34 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: MediaTek Peripheral Configuration Controller
> > +
> > +maintainers:
> > +  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
>
> Don't need oneOf here.
>
> > +      - items:
> > +        - enum:
> > +          - mediatek,pericfg
>
> Doesn't match the example (which is correct).
>

Hi Rob,

FYI this was superseded by v3 which should now be correct.

Bart

Re: [PATCH v2 01/14] dt-bindings: arm: add a binding document for MediaTek PERICFG controller

[Bartosz Golaszewski]

wt., 19 maj 2020 o 20:28 Rob Herring <robh@kernel.org> napisał(a):
>
> On Mon, May 11, 2020 at 05:07:46PM +0200, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > This adds a binding document for the PERICFG controller present on
> > MediaTek SoCs. For now the only variant supported is 'mt8516-pericfg'.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
> >  .../arm/mediatek/mediatek,pericfg.yaml        | 34 +++++++++++++++++++
> >  1 file changed, 34 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> > new file mode 100644
> > index 000000000000..74b2a6173ffb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> > @@ -0,0 +1,34 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: MediaTek Peripheral Configuration Controller
> > +
> > +maintainers:
> > +  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
>
> Don't need oneOf here.
>
> > +      - items:
> > +        - enum:
> > +          - mediatek,pericfg
>
> Doesn't match the example (which is correct).
>

Hi Rob,

FYI this was superseded by v3 which should now be correct.

Bart

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v2 01/14] dt-bindings: arm: add a binding document for MediaTek PERICFG controller

[Bartosz Golaszewski]

wt., 19 maj 2020 o 20:28 Rob Herring <robh@kernel.org> napisał(a):
>
> On Mon, May 11, 2020 at 05:07:46PM +0200, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> >
> > This adds a binding document for the PERICFG controller present on
> > MediaTek SoCs. For now the only variant supported is 'mt8516-pericfg'.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > ---
> >  .../arm/mediatek/mediatek,pericfg.yaml        | 34 +++++++++++++++++++
> >  1 file changed, 34 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> > new file mode 100644
> > index 000000000000..74b2a6173ffb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
> > @@ -0,0 +1,34 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: MediaTek Peripheral Configuration Controller
> > +
> > +maintainers:
> > +  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
>
> Don't need oneOf here.
>
> > +      - items:
> > +        - enum:
> > +          - mediatek,pericfg
>
> Doesn't match the example (which is correct).
>

Hi Rob,

FYI this was superseded by v3 which should now be correct.

Bart

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel