All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: heikki.krogerus@linux.intel.com, gregkh@linuxfoundation.org,
	linux-usb@vger.kernel.org, bryan.odonoghue@linaro.org
Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	"Gustavo A . R . Silva" <garsilva@embeddedor.com>,
	Kees Cook <keescook@chromium.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/1] usb: typec: tps6598x: Add USB role switching logic
Date: Tue, 12 May 2020 00:19:30 +0100	[thread overview]
Message-ID: <20200511231930.2825183-2-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20200511231930.2825183-1-bryan.odonoghue@linaro.org>

This patch adds USB role switch support to the tps6598x.

The setup to initiate or accept a data-role switch is both assumed and
currently required to be baked-into the firmware as described in TI's
document here.

Link: https://www.ti.com/lit/an/slva843a/slva843a.pdf

With this change its possible to use the USB role-switch API to detect and
notify role-switches to downstream consumers.

Tested with a ChipIdea controller on a Qualcomm MSM8939.

Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/usb/typec/tps6598x.c | 57 +++++++++++++++++++++++++++++++-----
 1 file changed, 50 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c
index defa651282b0..b7c9fe5caabe 100644
--- a/drivers/usb/typec/tps6598x.c
+++ b/drivers/usb/typec/tps6598x.c
@@ -12,6 +12,7 @@
 #include <linux/regmap.h>
 #include <linux/interrupt.h>
 #include <linux/usb/typec.h>
+#include <linux/usb/role.h>
 
 /* Register offsets */
 #define TPS_REG_VID			0x00
@@ -94,6 +95,7 @@ struct tps6598x {
 	struct typec_port *port;
 	struct typec_partner *partner;
 	struct usb_pd_identity partner_identity;
+	struct usb_role_switch *role_sw;
 };
 
 /*
@@ -190,6 +192,23 @@ static int tps6598x_read_partner_identity(struct tps6598x *tps)
 	return 0;
 }
 
+static void tps6598x_set_data_role(struct tps6598x *tps,
+				   enum typec_data_role role, bool connected)
+{
+	enum usb_role role_val;
+
+	if (role == TYPEC_HOST)
+		role_val = USB_ROLE_HOST;
+	else
+		role_val = USB_ROLE_DEVICE;
+
+	if (!connected)
+		role_val = USB_ROLE_NONE;
+
+	usb_role_switch_set_role(tps->role_sw, role_val);
+	typec_set_data_role(tps->port, role);
+}
+
 static int tps6598x_connect(struct tps6598x *tps, u32 status)
 {
 	struct typec_partner_desc desc;
@@ -220,7 +239,7 @@ static int tps6598x_connect(struct tps6598x *tps, u32 status)
 	typec_set_pwr_opmode(tps->port, mode);
 	typec_set_pwr_role(tps->port, TPS_STATUS_PORTROLE(status));
 	typec_set_vconn_role(tps->port, TPS_STATUS_VCONN(status));
-	typec_set_data_role(tps->port, TPS_STATUS_DATAROLE(status));
+	tps6598x_set_data_role(tps, TPS_STATUS_DATAROLE(status), true);
 
 	tps->partner = typec_register_partner(tps->port, &desc);
 	if (IS_ERR(tps->partner))
@@ -240,7 +259,7 @@ static void tps6598x_disconnect(struct tps6598x *tps, u32 status)
 	typec_set_pwr_opmode(tps->port, TYPEC_PWR_MODE_USB);
 	typec_set_pwr_role(tps->port, TPS_STATUS_PORTROLE(status));
 	typec_set_vconn_role(tps->port, TPS_STATUS_VCONN(status));
-	typec_set_data_role(tps->port, TPS_STATUS_DATAROLE(status));
+	tps6598x_set_data_role(tps, TPS_STATUS_DATAROLE(status), false);
 }
 
 static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
@@ -328,7 +347,7 @@ static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role)
 		goto out_unlock;
 	}
 
-	typec_set_data_role(tps->port, role);
+	tps6598x_set_data_role(tps, role, true);
 
 out_unlock:
 	mutex_unlock(&tps->lock);
@@ -452,6 +471,7 @@ static int tps6598x_probe(struct i2c_client *client)
 {
 	struct typec_capability typec_cap = { };
 	struct tps6598x *tps;
+	struct fwnode_handle *fwnode;
 	u32 status;
 	u32 conf;
 	u32 vid;
@@ -495,11 +515,22 @@ static int tps6598x_probe(struct i2c_client *client)
 	if (ret < 0)
 		return ret;
 
+	fwnode = device_get_named_child_node(&client->dev, "connector");
+	if (IS_ERR(fwnode))
+		return PTR_ERR(fwnode);
+
+	tps->role_sw = fwnode_usb_role_switch_get(fwnode);
+	if (IS_ERR(tps->role_sw)) {
+		ret = PTR_ERR(tps->role_sw);
+		goto err_fwnode_put;
+	}
+
 	typec_cap.revision = USB_TYPEC_REV_1_2;
 	typec_cap.pd_revision = 0x200;
 	typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
 	typec_cap.driver_data = tps;
 	typec_cap.ops = &tps6598x_ops;
+	typec_cap.fwnode = fwnode;
 
 	switch (TPS_SYSCONF_PORTINFO(conf)) {
 	case TPS_PORTINFO_SINK_ACCESSORY:
@@ -525,12 +556,16 @@ static int tps6598x_probe(struct i2c_client *client)
 		typec_cap.data = TYPEC_PORT_DFP;
 		break;
 	default:
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_role_put;
 	}
 
 	tps->port = typec_register_port(&client->dev, &typec_cap);
-	if (IS_ERR(tps->port))
-		return PTR_ERR(tps->port);
+	if (IS_ERR(tps->port)) {
+		ret = PTR_ERR(tps->port);
+		goto err_role_put;
+	}
+	fwnode_handle_put(fwnode);
 
 	if (status & TPS_STATUS_PLUG_PRESENT) {
 		ret = tps6598x_connect(tps, status);
@@ -545,12 +580,19 @@ static int tps6598x_probe(struct i2c_client *client)
 	if (ret) {
 		tps6598x_disconnect(tps, 0);
 		typec_unregister_port(tps->port);
-		return ret;
+		goto err_role_put;
 	}
 
 	i2c_set_clientdata(client, tps);
 
 	return 0;
+
+err_role_put:
+	usb_role_switch_put(tps->role_sw);
+err_fwnode_put:
+	fwnode_handle_put(fwnode);
+
+	return ret;
 }
 
 static int tps6598x_remove(struct i2c_client *client)
@@ -559,6 +601,7 @@ static int tps6598x_remove(struct i2c_client *client)
 
 	tps6598x_disconnect(tps, 0);
 	typec_unregister_port(tps->port);
+	usb_role_switch_put(tps->role_sw);
 
 	return 0;
 }
-- 
2.25.1


  reply	other threads:[~2020-05-11 23:19 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-11 23:19 [PATCH v3 0/1] Add USB role switch to tps6598x Bryan O'Donoghue
2020-05-11 23:19 ` Bryan O'Donoghue [this message]
2020-05-13 14:04   ` [PATCH v3 1/1] usb: typec: tps6598x: Add USB role switching logic Heikki Krogerus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200511231930.2825183-2-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=garsilva@embeddedor.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=keescook@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nikolaus.voss@loewensteinmedical.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.