All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ming Lei <ming.lei@redhat.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org, Ming Lei <ming.lei@redhat.com>
Subject: [PATCH V11 00/12] blk-mq: improvement CPU hotplug
Date: Wed, 13 May 2020 11:47:51 +0800	[thread overview]
Message-ID: <20200513034803.1844579-1-ming.lei@redhat.com> (raw)

Hi,

Thomas mentioned:
    "
     That was the constraint of managed interrupts from the very beginning:
    
      The driver/subsystem has to quiesce the interrupt line and the associated
      queue _before_ it gets shutdown in CPU unplug and not fiddle with it
      until it's restarted by the core when the CPU is plugged in again.
    "

But no drivers or blk-mq do that before one hctx becomes inactive(all
CPUs for one hctx are offline), and even it is worse, blk-mq stills tries
to run hw queue after hctx is dead, see blk_mq_hctx_notify_dead().

This patchset tries to address the issue by two stages:

1) add one new cpuhp state of CPUHP_AP_BLK_MQ_ONLINE

- mark the hctx as internal stopped, and drain all in-flight requests
if the hctx is going to be dead.

2) re-submit IO in the state of CPUHP_BLK_MQ_DEAD after the hctx becomes dead

- steal bios from the request, and resubmit them via generic_make_request(),
then these IO will be mapped to other live hctx for dispatch

Thanks John Garry for running lots of tests on arm64 with this patchset
and co-working on investigating all kinds of issues.

Thanks Christoph's review on V7 & V8.

Please consider it for v5.8.

https://github.com/ming1/linux/commits/v5.7-rc-blk-mq-improve-cpu-hotplug

V11:
	- drop new callback from blk_mq_all_tag_busy_iter, add new helper
	of blk_mq_all_tag_iter (5/12), as suggested by Bart
	- fix request allocation hang in case of queue freeze(11/12), as
	reported by Bart

V10:
	- fix double bio complete in request resubmission(10/11)
	- add tested-by tag

V9:
	- add Reviewed-by tag
	- document more on memory barrier usage between getting driver tag
	and handling cpu offline(7/11)
	- small code cleanup as suggested by Chritoph(7/11)
	- rebase against for-5.8/block(1/11, 2/11)
V8:
	- add patches to share code with blk_rq_prep_clone
	- code re-organization as suggested by Christoph, most of them are
	in 04/11, 10/11
	- add reviewed-by tag

V7:
	- fix updating .nr_active in get_driver_tag
	- add hctx->cpumask check in cpuhp handler
	- only drain requests which tag is >= 0
	- pass more aggressive cpuhotplug&io test

V6:
	- simplify getting driver tag, so that we can drain in-flight
	  requests correctly without using synchronize_rcu()
	- handle re-submission of flush & passthrough request correctly

V5:
	- rename BLK_MQ_S_INTERNAL_STOPPED as BLK_MQ_S_INACTIVE
	- re-factor code for re-submit requests in cpu dead hotplug handler
	- address requeue corner case

V4:
	- resubmit IOs in dispatch list in case that this hctx is dead 

V3:
	- re-organize patch 2 & 3 a bit for addressing Hannes's comment
	- fix patch 4 for avoiding potential deadlock, as found by Hannes

V2:
	- patch4 & patch 5 in V1 have been merged to block tree, so remove
	  them
	- address comments from John Garry and Minwoo


*** BLURB HERE ***

Ming Lei (12):
  block: clone nr_integrity_segments and write_hint in blk_rq_prep_clone
  block: add helper for copying request
  blk-mq: mark blk_mq_get_driver_tag as static
  blk-mq: assign rq->tag in blk_mq_get_driver_tag
  blk-mq: add blk_mq_all_tag_iter
  blk-mq: prepare for draining IO when hctx's all CPUs are offline
  blk-mq: stop to handle IO and drain IO before hctx becomes inactive
  block: add blk_end_flush_machinery
  blk-mq: add blk_mq_hctx_handle_dead_cpu for handling cpu dead
  block: add request allocation flag of BLK_MQ_REQ_FORCE
  blk-mq: re-submit IO in case that hctx is inactive
  block: deactivate hctx when the hctx is actually inactive

 block/blk-core.c           |  32 +++-
 block/blk-flush.c          | 141 ++++++++++++---
 block/blk-mq-debugfs.c     |   2 +
 block/blk-mq-tag.c         |  33 +++-
 block/blk-mq-tag.h         |   2 +
 block/blk-mq.c             | 356 +++++++++++++++++++++++++++++--------
 block/blk-mq.h             |  22 ++-
 block/blk.h                |  11 +-
 drivers/block/loop.c       |   2 +-
 drivers/md/dm-rq.c         |   2 +-
 include/linux/blk-mq.h     |  14 ++
 include/linux/cpuhotplug.h |   1 +
 12 files changed, 494 insertions(+), 124 deletions(-)

-- 
2.25.2


             reply	other threads:[~2020-05-13  3:48 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-13  3:47 Ming Lei [this message]
2020-05-13  3:47 ` [PATCH V11 01/12] block: clone nr_integrity_segments and write_hint in blk_rq_prep_clone Ming Lei
2020-05-13  3:47 ` [PATCH V11 02/12] block: add helper for copying request Ming Lei
2020-05-13  3:47 ` [PATCH V11 03/12] blk-mq: mark blk_mq_get_driver_tag as static Ming Lei
2020-05-13  3:47 ` [PATCH V11 04/12] blk-mq: assign rq->tag in blk_mq_get_driver_tag Ming Lei
2020-05-13  3:47 ` [PATCH V11 05/12] blk-mq: add blk_mq_all_tag_iter Ming Lei
2020-05-13 11:56   ` Christoph Hellwig
2020-05-13  3:47 ` [PATCH V11 06/12] blk-mq: prepare for draining IO when hctx's all CPUs are offline Ming Lei
2020-05-13  6:35   ` Hannes Reinecke
2020-05-13 11:58   ` Christoph Hellwig
2020-05-14  0:33     ` Ming Lei
2020-05-13  3:47 ` [PATCH V11 07/12] blk-mq: stop to handle IO and drain IO before hctx becomes inactive Ming Lei
2020-05-13 11:59   ` Christoph Hellwig
2020-05-14  0:36     ` Ming Lei
2020-05-14  1:12     ` Bart Van Assche
2020-05-14  3:10     ` Ming Lei
2020-05-13  3:47 ` [PATCH V11 08/12] block: add blk_end_flush_machinery Ming Lei
2020-05-13 12:00   ` Christoph Hellwig
2020-05-13  3:48 ` [PATCH V11 09/12] blk-mq: add blk_mq_hctx_handle_dead_cpu for handling cpu dead Ming Lei
2020-05-13 12:06   ` Christoph Hellwig
2020-05-13  3:48 ` [PATCH V11 10/12] block: add request allocation flag of BLK_MQ_REQ_FORCE Ming Lei
2020-05-13 10:34   ` [PATCH V12 " Ming Lei
2020-05-13  3:48 ` [PATCH V11 11/12] blk-mq: re-submit IO in case that hctx is inactive Ming Lei
2020-05-13  9:21   ` John Garry
2020-05-13 12:21   ` Christoph Hellwig
2020-05-13 15:03     ` Bart Van Assche
2020-05-14  0:45       ` Ming Lei
2020-05-14  0:40     ` Ming Lei
2020-05-13  3:48 ` [PATCH V11 12/12] block: deactivate hctx when the hctx is actually inactive Ming Lei
2020-05-13  7:34 ` [PATCH V11 00/12] blk-mq: improvement CPU hotplug John Garry
2020-05-13 10:37   ` Ming Lei
2020-05-13 11:33     ` John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200513034803.1844579-1-ming.lei@redhat.com \
    --to=ming.lei@redhat.com \
    --cc=axboe@kernel.dk \
    --cc=linux-block@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.