* [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset
@ 2020-05-13 16:56 ` Rodrigo Rolim Mendes de Alencar
0 siblings, 0 replies; 10+ messages in thread
From: Rodrigo Rolim Mendes de Alencar @ 2020-05-13 16:56 UTC (permalink / raw)
To: linux-fbdev
Cc: linux-kernel, b.zolnierkie, andy.shevchenko, devicetree,
Rodrigo Rolim Mendes de Alencar, Rodrigo Alencar
This patch provides support for displays like VGM128064B0W10,
which requires a column offset of 2, i.e., its segments starts
in SEG2 and ends in SEG129.
Signed-off-by: Rodrigo Alencar <455.rodrigo.alencar@gmail.com>
---
Documentation/devicetree/bindings/display/ssd1307fb.txt | 1 +
drivers/video/fbdev/ssd1307fb.c | 8 ++++++--
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt
index 27333b9551b3..2dcb6d12d137 100644
--- a/Documentation/devicetree/bindings/display/ssd1307fb.txt
+++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt
@@ -19,6 +19,7 @@ Optional properties:
- vbat-supply: The supply for VBAT
- solomon,segment-no-remap: Display needs normal (non-inverted) data column
to segment mapping
+ - solomon,col-offset: Offset of columns (COL/SEG) that the screen is mapped to.
- solomon,com-seq: Display uses sequential COM pin configuration
- solomon,com-lrremap: Display uses left-right COM pin remap
- solomon,com-invdir: Display uses inverted COM pin scan direction
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 8e06ba912d60..f135b2959f87 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -74,6 +74,7 @@ struct ssd1307fb_par {
struct fb_info *info;
u8 lookup_table[4];
u32 page_offset;
+ u32 col_offset;
u32 prechargep1;
u32 prechargep2;
struct pwm_device *pwm;
@@ -458,11 +459,11 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x0);
+ ret = ssd1307fb_write_cmd(par->client, par->col_offset);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->width - 1);
+ ret = ssd1307fb_write_cmd(par->client, par->col_offset + par->width - 1);
if (ret < 0)
return ret;
@@ -626,6 +627,9 @@ static int ssd1307fb_probe(struct i2c_client *client)
if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset))
par->page_offset = 1;
+ if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
+ par->col_offset = 0;
+
if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
par->com_offset = 0;
--
2.23.0.rc1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset
@ 2020-05-13 16:56 ` Rodrigo Rolim Mendes de Alencar
0 siblings, 0 replies; 10+ messages in thread
From: Rodrigo Rolim Mendes de Alencar @ 2020-05-13 16:56 UTC (permalink / raw)
To: linux-fbdev
Cc: linux-kernel, b.zolnierkie, andy.shevchenko, devicetree,
Rodrigo Rolim Mendes de Alencar, Rodrigo Alencar
This patch provides support for displays like VGM128064B0W10,
which requires a column offset of 2, i.e., its segments starts
in SEG2 and ends in SEG129.
Signed-off-by: Rodrigo Alencar <455.rodrigo.alencar@gmail.com>
---
Documentation/devicetree/bindings/display/ssd1307fb.txt | 1 +
drivers/video/fbdev/ssd1307fb.c | 8 ++++++--
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt
index 27333b9551b3..2dcb6d12d137 100644
--- a/Documentation/devicetree/bindings/display/ssd1307fb.txt
+++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt
@@ -19,6 +19,7 @@ Optional properties:
- vbat-supply: The supply for VBAT
- solomon,segment-no-remap: Display needs normal (non-inverted) data column
to segment mapping
+ - solomon,col-offset: Offset of columns (COL/SEG) that the screen is mapped to.
- solomon,com-seq: Display uses sequential COM pin configuration
- solomon,com-lrremap: Display uses left-right COM pin remap
- solomon,com-invdir: Display uses inverted COM pin scan direction
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 8e06ba912d60..f135b2959f87 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -74,6 +74,7 @@ struct ssd1307fb_par {
struct fb_info *info;
u8 lookup_table[4];
u32 page_offset;
+ u32 col_offset;
u32 prechargep1;
u32 prechargep2;
struct pwm_device *pwm;
@@ -458,11 +459,11 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x0);
+ ret = ssd1307fb_write_cmd(par->client, par->col_offset);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->width - 1);
+ ret = ssd1307fb_write_cmd(par->client, par->col_offset + par->width - 1);
if (ret < 0)
return ret;
@@ -626,6 +627,9 @@ static int ssd1307fb_probe(struct i2c_client *client)
if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset))
par->page_offset = 1;
+ if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
+ par->col_offset = 0;
+
if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
par->com_offset = 0;
--
2.23.0.rc1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset
2020-05-13 16:56 ` Rodrigo Rolim Mendes de Alencar
@ 2020-05-13 17:13 ` Andy Shevchenko
-1 siblings, 0 replies; 10+ messages in thread
From: Andy Shevchenko @ 2020-05-13 17:13 UTC (permalink / raw)
To: Rodrigo Rolim Mendes de Alencar
Cc: linux-fbdev, Linux Kernel Mailing List,
Bartlomiej Zolnierkiewicz, devicetree,
Rodrigo Rolim Mendes de Alencar
On Wed, May 13, 2020 at 7:56 PM Rodrigo Rolim Mendes de Alencar
<455.rodrigo.alencar@gmail.com> wrote:
>
> This patch provides support for displays like VGM128064B0W10,
> which requires a column offset of 2, i.e., its segments starts
> in SEG2 and ends in SEG129.
Also, include Rob as well into Cc.
...
> + if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
> + par->col_offset = 0;
> +
> if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
> par->com_offset = 0;
Have you ever compile it?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset
@ 2020-05-13 17:13 ` Andy Shevchenko
0 siblings, 0 replies; 10+ messages in thread
From: Andy Shevchenko @ 2020-05-13 17:13 UTC (permalink / raw)
To: Rodrigo Rolim Mendes de Alencar
Cc: linux-fbdev, Linux Kernel Mailing List,
Bartlomiej Zolnierkiewicz, devicetree,
Rodrigo Rolim Mendes de Alencar
On Wed, May 13, 2020 at 7:56 PM Rodrigo Rolim Mendes de Alencar
<455.rodrigo.alencar@gmail.com> wrote:
>
> This patch provides support for displays like VGM128064B0W10,
> which requires a column offset of 2, i.e., its segments starts
> in SEG2 and ends in SEG129.
Also, include Rob as well into Cc.
...
> + if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
> + par->col_offset = 0;
> +
> if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
> par->com_offset = 0;
Have you ever compile it?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset
2020-05-13 17:13 ` Andy Shevchenko
@ 2020-05-13 17:20 ` Rodrigo Alencar
-1 siblings, 0 replies; 10+ messages in thread
From: Rodrigo Alencar @ 2020-05-13 17:20 UTC (permalink / raw)
To: Andy Shevchenko
Cc: linux-fbdev, Linux Kernel Mailing List,
Bartlomiej Zolnierkiewicz, devicetree,
Rodrigo Rolim Mendes de Alencar
Em qua., 13 de mai. de 2020 às 14:13, Andy Shevchenko
<andy.shevchenko@gmail.com> escreveu:
>
> On Wed, May 13, 2020 at 7:56 PM Rodrigo Rolim Mendes de Alencar
> <455.rodrigo.alencar@gmail.com> wrote:
> >
> > This patch provides support for displays like VGM128064B0W10,
> > which requires a column offset of 2, i.e., its segments starts
> > in SEG2 and ends in SEG129.
>
> Also, include Rob as well into Cc.
>
> ...
>
> > + if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
> > + par->col_offset = 0;
> > +
> > if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
> > par->com_offset = 0;
>
> Have you ever compile it?
hmm I did it now. Sorry... found another issue. I'll fix it again
>
> --
> With Best Regards,
> Andy Shevchenko
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset
@ 2020-05-13 17:20 ` Rodrigo Alencar
0 siblings, 0 replies; 10+ messages in thread
From: Rodrigo Alencar @ 2020-05-13 17:20 UTC (permalink / raw)
To: Andy Shevchenko
Cc: linux-fbdev, Linux Kernel Mailing List,
Bartlomiej Zolnierkiewicz, devicetree,
Rodrigo Rolim Mendes de Alencar
Em qua., 13 de mai. de 2020 Ã s 14:13, Andy Shevchenko
<andy.shevchenko@gmail.com> escreveu:
>
> On Wed, May 13, 2020 at 7:56 PM Rodrigo Rolim Mendes de Alencar
> <455.rodrigo.alencar@gmail.com> wrote:
> >
> > This patch provides support for displays like VGM128064B0W10,
> > which requires a column offset of 2, i.e., its segments starts
> > in SEG2 and ends in SEG129.
>
> Also, include Rob as well into Cc.
>
> ...
>
> > + if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
> > + par->col_offset = 0;
> > +
> > if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
> > par->com_offset = 0;
>
> Have you ever compile it?
hmm I did it now. Sorry... found another issue. I'll fix it again
>
> --
> With Best Regards,
> Andy Shevchenko
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset
2020-05-13 16:56 ` Rodrigo Rolim Mendes de Alencar
(?)
(?)
@ 2020-05-13 20:11 ` kbuild test robot
-1 siblings, 0 replies; 10+ messages in thread
From: kbuild test robot @ 2020-05-13 20:11 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 8281 bytes --]
Hi Rodrigo,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on next-20200512]
[cannot apply to robh/for-next linus/master linux/master v5.7-rc5 v5.7-rc4 v5.7-rc3 v5.7-rc5]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Rodrigo-Rolim-Mendes-de-Alencar/video-fbdev-ssd1307fb-Added-support-to-Column-offset/20200514-010137
base: e098d7762d602be640c53565ceca342f81e55ad2
config: x86_64-allyesconfig (attached as .config)
compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project 310d32cb80a611e6384a921e85607fea05841f26)
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kbuild test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> drivers/video/fbdev/ssd1307fb.c:630:31: error: use of undeclared identifier 'node'
if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
^
1 error generated.
vim +/node +630 drivers/video/fbdev/ssd1307fb.c
579
580 static int ssd1307fb_probe(struct i2c_client *client)
581 {
582 struct device *dev = &client->dev;
583 struct backlight_device *bl;
584 char bl_name[12];
585 struct fb_info *info;
586 struct fb_deferred_io *ssd1307fb_defio;
587 u32 vmem_size;
588 struct ssd1307fb_par *par;
589 void *vmem;
590 int ret;
591
592 info = framebuffer_alloc(sizeof(struct ssd1307fb_par), dev);
593 if (!info)
594 return -ENOMEM;
595
596 par = info->par;
597 par->info = info;
598 par->client = client;
599
600 par->device_info = device_get_match_data(dev);
601
602 par->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
603 if (IS_ERR(par->reset)) {
604 dev_err(dev, "failed to get reset gpio: %ld\n",
605 PTR_ERR(par->reset));
606 ret = PTR_ERR(par->reset);
607 goto fb_alloc_error;
608 }
609
610 par->vbat_reg = devm_regulator_get_optional(dev, "vbat");
611 if (IS_ERR(par->vbat_reg)) {
612 ret = PTR_ERR(par->vbat_reg);
613 if (ret == -ENODEV) {
614 par->vbat_reg = NULL;
615 } else {
616 dev_err(dev, "failed to get VBAT regulator: %d\n", ret);
617 goto fb_alloc_error;
618 }
619 }
620
621 if (device_property_read_u32(dev, "solomon,width", &par->width))
622 par->width = 96;
623
624 if (device_property_read_u32(dev, "solomon,height", &par->height))
625 par->height = 16;
626
627 if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset))
628 par->page_offset = 1;
629
> 630 if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
631 par->col_offset = 0;
632
633 if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
634 par->com_offset = 0;
635
636 if (device_property_read_u32(dev, "solomon,prechargep1", &par->prechargep1))
637 par->prechargep1 = 2;
638
639 if (device_property_read_u32(dev, "solomon,prechargep2", &par->prechargep2))
640 par->prechargep2 = 2;
641
642 if (!device_property_read_u8_array(dev, "solomon,lookup-table",
643 par->lookup_table,
644 ARRAY_SIZE(par->lookup_table)))
645 par->lookup_table_set = 1;
646
647 par->seg_remap = !device_property_read_bool(dev, "solomon,segment-no-remap");
648 par->com_seq = device_property_read_bool(dev, "solomon,com-seq");
649 par->com_lrremap = device_property_read_bool(dev, "solomon,com-lrremap");
650 par->com_invdir = device_property_read_bool(dev, "solomon,com-invdir");
651 par->area_color_enable =
652 device_property_read_bool(dev, "solomon,area-color-enable");
653 par->low_power = device_property_read_bool(dev, "solomon,low-power");
654
655 par->contrast = 127;
656 par->vcomh = par->device_info->default_vcomh;
657
658 /* Setup display timing */
659 if (device_property_read_u32(dev, "solomon,dclk-div", &par->dclk_div))
660 par->dclk_div = par->device_info->default_dclk_div;
661 if (device_property_read_u32(dev, "solomon,dclk-frq", &par->dclk_frq))
662 par->dclk_frq = par->device_info->default_dclk_frq;
663
664 vmem_size = DIV_ROUND_UP(par->width, 8) * par->height;
665
666 vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
667 get_order(vmem_size));
668 if (!vmem) {
669 dev_err(dev, "Couldn't allocate graphical memory.\n");
670 ret = -ENOMEM;
671 goto fb_alloc_error;
672 }
673
674 ssd1307fb_defio = devm_kzalloc(dev, sizeof(*ssd1307fb_defio),
675 GFP_KERNEL);
676 if (!ssd1307fb_defio) {
677 dev_err(dev, "Couldn't allocate deferred io.\n");
678 ret = -ENOMEM;
679 goto fb_alloc_error;
680 }
681
682 ssd1307fb_defio->delay = HZ / refreshrate;
683 ssd1307fb_defio->deferred_io = ssd1307fb_deferred_io;
684
685 info->fbops = &ssd1307fb_ops;
686 info->fix = ssd1307fb_fix;
687 info->fix.line_length = DIV_ROUND_UP(par->width, 8);
688 info->fbdefio = ssd1307fb_defio;
689
690 info->var = ssd1307fb_var;
691 info->var.xres = par->width;
692 info->var.xres_virtual = par->width;
693 info->var.yres = par->height;
694 info->var.yres_virtual = par->height;
695
696 info->screen_buffer = vmem;
697 info->fix.smem_start = __pa(vmem);
698 info->fix.smem_len = vmem_size;
699
700 fb_deferred_io_init(info);
701
702 i2c_set_clientdata(client, info);
703
704 if (par->reset) {
705 /* Reset the screen */
706 gpiod_set_value_cansleep(par->reset, 1);
707 udelay(4);
708 gpiod_set_value_cansleep(par->reset, 0);
709 udelay(4);
710 }
711
712 if (par->vbat_reg) {
713 ret = regulator_enable(par->vbat_reg);
714 if (ret) {
715 dev_err(dev, "failed to enable VBAT: %d\n", ret);
716 goto reset_oled_error;
717 }
718 }
719
720 ret = ssd1307fb_init(par);
721 if (ret)
722 goto regulator_enable_error;
723
724 ret = register_framebuffer(info);
725 if (ret) {
726 dev_err(dev, "Couldn't register the framebuffer\n");
727 goto panel_init_error;
728 }
729
730 snprintf(bl_name, sizeof(bl_name), "ssd1307fb%d", info->node);
731 bl = backlight_device_register(bl_name, dev, par, &ssd1307fb_bl_ops,
732 NULL);
733 if (IS_ERR(bl)) {
734 ret = PTR_ERR(bl);
735 dev_err(dev, "unable to register backlight device: %d\n", ret);
736 goto bl_init_error;
737 }
738
739 bl->props.brightness = par->contrast;
740 bl->props.max_brightness = MAX_CONTRAST;
741 info->bl_dev = bl;
742
743 dev_info(dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
744
745 return 0;
746
747 bl_init_error:
748 unregister_framebuffer(info);
749 panel_init_error:
750 if (par->device_info->need_pwm) {
751 pwm_disable(par->pwm);
752 pwm_put(par->pwm);
753 }
754 regulator_enable_error:
755 if (par->vbat_reg)
756 regulator_disable(par->vbat_reg);
757 reset_oled_error:
758 fb_deferred_io_cleanup(info);
759 fb_alloc_error:
760 framebuffer_release(info);
761 return ret;
762 }
763
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 74244 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset
2020-05-13 16:56 ` Rodrigo Rolim Mendes de Alencar
(?)
@ 2020-05-13 20:58 ` kbuild test robot
-1 siblings, 0 replies; 10+ messages in thread
From: kbuild test robot @ 2020-05-13 20:58 UTC (permalink / raw)
To: Rodrigo Rolim Mendes de Alencar, linux-fbdev
Cc: kbuild-all, linux-kernel, b.zolnierkie, andy.shevchenko,
devicetree, Rodrigo Rolim Mendes de Alencar, Rodrigo Alencar
[-- Attachment #1: Type: text/plain, Size: 8162 bytes --]
Hi Rodrigo,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on next-20200512]
[cannot apply to robh/for-next linus/master linux/master v5.7-rc5 v5.7-rc4 v5.7-rc3 v5.7-rc5]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Rodrigo-Rolim-Mendes-de-Alencar/video-fbdev-ssd1307fb-Added-support-to-Column-offset/20200514-010137
base: e098d7762d602be640c53565ceca342f81e55ad2
config: parisc-randconfig-r022-20200513 (attached as .config)
compiler: hppa-linux-gcc (GCC) 9.3.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day GCC_VERSION=9.3.0 make.cross ARCH=parisc
If you fix the issue, kindly add following tag as appropriate
Reported-by: kbuild test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/video/fbdev/ssd1307fb.c: In function 'ssd1307fb_probe':
>> drivers/video/fbdev/ssd1307fb.c:630:31: error: 'node' undeclared (first use in this function); did you mean 'inode'?
630 | if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
| ^~~~
| inode
drivers/video/fbdev/ssd1307fb.c:630:31: note: each undeclared identifier is reported only once for each function it appears in
vim +630 drivers/video/fbdev/ssd1307fb.c
579
580 static int ssd1307fb_probe(struct i2c_client *client)
581 {
582 struct device *dev = &client->dev;
583 struct backlight_device *bl;
584 char bl_name[12];
585 struct fb_info *info;
586 struct fb_deferred_io *ssd1307fb_defio;
587 u32 vmem_size;
588 struct ssd1307fb_par *par;
589 void *vmem;
590 int ret;
591
592 info = framebuffer_alloc(sizeof(struct ssd1307fb_par), dev);
593 if (!info)
594 return -ENOMEM;
595
596 par = info->par;
597 par->info = info;
598 par->client = client;
599
600 par->device_info = device_get_match_data(dev);
601
602 par->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
603 if (IS_ERR(par->reset)) {
604 dev_err(dev, "failed to get reset gpio: %ld\n",
605 PTR_ERR(par->reset));
606 ret = PTR_ERR(par->reset);
607 goto fb_alloc_error;
608 }
609
610 par->vbat_reg = devm_regulator_get_optional(dev, "vbat");
611 if (IS_ERR(par->vbat_reg)) {
612 ret = PTR_ERR(par->vbat_reg);
613 if (ret == -ENODEV) {
614 par->vbat_reg = NULL;
615 } else {
616 dev_err(dev, "failed to get VBAT regulator: %d\n", ret);
617 goto fb_alloc_error;
618 }
619 }
620
621 if (device_property_read_u32(dev, "solomon,width", &par->width))
622 par->width = 96;
623
624 if (device_property_read_u32(dev, "solomon,height", &par->height))
625 par->height = 16;
626
627 if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset))
628 par->page_offset = 1;
629
> 630 if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
631 par->col_offset = 0;
632
633 if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
634 par->com_offset = 0;
635
636 if (device_property_read_u32(dev, "solomon,prechargep1", &par->prechargep1))
637 par->prechargep1 = 2;
638
639 if (device_property_read_u32(dev, "solomon,prechargep2", &par->prechargep2))
640 par->prechargep2 = 2;
641
642 if (!device_property_read_u8_array(dev, "solomon,lookup-table",
643 par->lookup_table,
644 ARRAY_SIZE(par->lookup_table)))
645 par->lookup_table_set = 1;
646
647 par->seg_remap = !device_property_read_bool(dev, "solomon,segment-no-remap");
648 par->com_seq = device_property_read_bool(dev, "solomon,com-seq");
649 par->com_lrremap = device_property_read_bool(dev, "solomon,com-lrremap");
650 par->com_invdir = device_property_read_bool(dev, "solomon,com-invdir");
651 par->area_color_enable =
652 device_property_read_bool(dev, "solomon,area-color-enable");
653 par->low_power = device_property_read_bool(dev, "solomon,low-power");
654
655 par->contrast = 127;
656 par->vcomh = par->device_info->default_vcomh;
657
658 /* Setup display timing */
659 if (device_property_read_u32(dev, "solomon,dclk-div", &par->dclk_div))
660 par->dclk_div = par->device_info->default_dclk_div;
661 if (device_property_read_u32(dev, "solomon,dclk-frq", &par->dclk_frq))
662 par->dclk_frq = par->device_info->default_dclk_frq;
663
664 vmem_size = DIV_ROUND_UP(par->width, 8) * par->height;
665
666 vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
667 get_order(vmem_size));
668 if (!vmem) {
669 dev_err(dev, "Couldn't allocate graphical memory.\n");
670 ret = -ENOMEM;
671 goto fb_alloc_error;
672 }
673
674 ssd1307fb_defio = devm_kzalloc(dev, sizeof(*ssd1307fb_defio),
675 GFP_KERNEL);
676 if (!ssd1307fb_defio) {
677 dev_err(dev, "Couldn't allocate deferred io.\n");
678 ret = -ENOMEM;
679 goto fb_alloc_error;
680 }
681
682 ssd1307fb_defio->delay = HZ / refreshrate;
683 ssd1307fb_defio->deferred_io = ssd1307fb_deferred_io;
684
685 info->fbops = &ssd1307fb_ops;
686 info->fix = ssd1307fb_fix;
687 info->fix.line_length = DIV_ROUND_UP(par->width, 8);
688 info->fbdefio = ssd1307fb_defio;
689
690 info->var = ssd1307fb_var;
691 info->var.xres = par->width;
692 info->var.xres_virtual = par->width;
693 info->var.yres = par->height;
694 info->var.yres_virtual = par->height;
695
696 info->screen_buffer = vmem;
697 info->fix.smem_start = __pa(vmem);
698 info->fix.smem_len = vmem_size;
699
700 fb_deferred_io_init(info);
701
702 i2c_set_clientdata(client, info);
703
704 if (par->reset) {
705 /* Reset the screen */
706 gpiod_set_value_cansleep(par->reset, 1);
707 udelay(4);
708 gpiod_set_value_cansleep(par->reset, 0);
709 udelay(4);
710 }
711
712 if (par->vbat_reg) {
713 ret = regulator_enable(par->vbat_reg);
714 if (ret) {
715 dev_err(dev, "failed to enable VBAT: %d\n", ret);
716 goto reset_oled_error;
717 }
718 }
719
720 ret = ssd1307fb_init(par);
721 if (ret)
722 goto regulator_enable_error;
723
724 ret = register_framebuffer(info);
725 if (ret) {
726 dev_err(dev, "Couldn't register the framebuffer\n");
727 goto panel_init_error;
728 }
729
730 snprintf(bl_name, sizeof(bl_name), "ssd1307fb%d", info->node);
731 bl = backlight_device_register(bl_name, dev, par, &ssd1307fb_bl_ops,
732 NULL);
733 if (IS_ERR(bl)) {
734 ret = PTR_ERR(bl);
735 dev_err(dev, "unable to register backlight device: %d\n", ret);
736 goto bl_init_error;
737 }
738
739 bl->props.brightness = par->contrast;
740 bl->props.max_brightness = MAX_CONTRAST;
741 info->bl_dev = bl;
742
743 dev_info(dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
744
745 return 0;
746
747 bl_init_error:
748 unregister_framebuffer(info);
749 panel_init_error:
750 if (par->device_info->need_pwm) {
751 pwm_disable(par->pwm);
752 pwm_put(par->pwm);
753 }
754 regulator_enable_error:
755 if (par->vbat_reg)
756 regulator_disable(par->vbat_reg);
757 reset_oled_error:
758 fb_deferred_io_cleanup(info);
759 fb_alloc_error:
760 framebuffer_release(info);
761 return ret;
762 }
763
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 33691 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset
@ 2020-05-13 20:58 ` kbuild test robot
0 siblings, 0 replies; 10+ messages in thread
From: kbuild test robot @ 2020-05-13 20:58 UTC (permalink / raw)
To: Rodrigo Rolim Mendes de Alencar, linux-fbdev
Cc: kbuild-all, linux-kernel, b.zolnierkie, andy.shevchenko,
devicetree, Rodrigo Rolim Mendes de Alencar
[-- Attachment #1: Type: text/plain, Size: 8162 bytes --]
Hi Rodrigo,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on next-20200512]
[cannot apply to robh/for-next linus/master linux/master v5.7-rc5 v5.7-rc4 v5.7-rc3 v5.7-rc5]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Rodrigo-Rolim-Mendes-de-Alencar/video-fbdev-ssd1307fb-Added-support-to-Column-offset/20200514-010137
base: e098d7762d602be640c53565ceca342f81e55ad2
config: parisc-randconfig-r022-20200513 (attached as .config)
compiler: hppa-linux-gcc (GCC) 9.3.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day GCC_VERSION=9.3.0 make.cross ARCH=parisc
If you fix the issue, kindly add following tag as appropriate
Reported-by: kbuild test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/video/fbdev/ssd1307fb.c: In function 'ssd1307fb_probe':
>> drivers/video/fbdev/ssd1307fb.c:630:31: error: 'node' undeclared (first use in this function); did you mean 'inode'?
630 | if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
| ^~~~
| inode
drivers/video/fbdev/ssd1307fb.c:630:31: note: each undeclared identifier is reported only once for each function it appears in
vim +630 drivers/video/fbdev/ssd1307fb.c
579
580 static int ssd1307fb_probe(struct i2c_client *client)
581 {
582 struct device *dev = &client->dev;
583 struct backlight_device *bl;
584 char bl_name[12];
585 struct fb_info *info;
586 struct fb_deferred_io *ssd1307fb_defio;
587 u32 vmem_size;
588 struct ssd1307fb_par *par;
589 void *vmem;
590 int ret;
591
592 info = framebuffer_alloc(sizeof(struct ssd1307fb_par), dev);
593 if (!info)
594 return -ENOMEM;
595
596 par = info->par;
597 par->info = info;
598 par->client = client;
599
600 par->device_info = device_get_match_data(dev);
601
602 par->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
603 if (IS_ERR(par->reset)) {
604 dev_err(dev, "failed to get reset gpio: %ld\n",
605 PTR_ERR(par->reset));
606 ret = PTR_ERR(par->reset);
607 goto fb_alloc_error;
608 }
609
610 par->vbat_reg = devm_regulator_get_optional(dev, "vbat");
611 if (IS_ERR(par->vbat_reg)) {
612 ret = PTR_ERR(par->vbat_reg);
613 if (ret == -ENODEV) {
614 par->vbat_reg = NULL;
615 } else {
616 dev_err(dev, "failed to get VBAT regulator: %d\n", ret);
617 goto fb_alloc_error;
618 }
619 }
620
621 if (device_property_read_u32(dev, "solomon,width", &par->width))
622 par->width = 96;
623
624 if (device_property_read_u32(dev, "solomon,height", &par->height))
625 par->height = 16;
626
627 if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset))
628 par->page_offset = 1;
629
> 630 if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
631 par->col_offset = 0;
632
633 if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
634 par->com_offset = 0;
635
636 if (device_property_read_u32(dev, "solomon,prechargep1", &par->prechargep1))
637 par->prechargep1 = 2;
638
639 if (device_property_read_u32(dev, "solomon,prechargep2", &par->prechargep2))
640 par->prechargep2 = 2;
641
642 if (!device_property_read_u8_array(dev, "solomon,lookup-table",
643 par->lookup_table,
644 ARRAY_SIZE(par->lookup_table)))
645 par->lookup_table_set = 1;
646
647 par->seg_remap = !device_property_read_bool(dev, "solomon,segment-no-remap");
648 par->com_seq = device_property_read_bool(dev, "solomon,com-seq");
649 par->com_lrremap = device_property_read_bool(dev, "solomon,com-lrremap");
650 par->com_invdir = device_property_read_bool(dev, "solomon,com-invdir");
651 par->area_color_enable =
652 device_property_read_bool(dev, "solomon,area-color-enable");
653 par->low_power = device_property_read_bool(dev, "solomon,low-power");
654
655 par->contrast = 127;
656 par->vcomh = par->device_info->default_vcomh;
657
658 /* Setup display timing */
659 if (device_property_read_u32(dev, "solomon,dclk-div", &par->dclk_div))
660 par->dclk_div = par->device_info->default_dclk_div;
661 if (device_property_read_u32(dev, "solomon,dclk-frq", &par->dclk_frq))
662 par->dclk_frq = par->device_info->default_dclk_frq;
663
664 vmem_size = DIV_ROUND_UP(par->width, 8) * par->height;
665
666 vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
667 get_order(vmem_size));
668 if (!vmem) {
669 dev_err(dev, "Couldn't allocate graphical memory.\n");
670 ret = -ENOMEM;
671 goto fb_alloc_error;
672 }
673
674 ssd1307fb_defio = devm_kzalloc(dev, sizeof(*ssd1307fb_defio),
675 GFP_KERNEL);
676 if (!ssd1307fb_defio) {
677 dev_err(dev, "Couldn't allocate deferred io.\n");
678 ret = -ENOMEM;
679 goto fb_alloc_error;
680 }
681
682 ssd1307fb_defio->delay = HZ / refreshrate;
683 ssd1307fb_defio->deferred_io = ssd1307fb_deferred_io;
684
685 info->fbops = &ssd1307fb_ops;
686 info->fix = ssd1307fb_fix;
687 info->fix.line_length = DIV_ROUND_UP(par->width, 8);
688 info->fbdefio = ssd1307fb_defio;
689
690 info->var = ssd1307fb_var;
691 info->var.xres = par->width;
692 info->var.xres_virtual = par->width;
693 info->var.yres = par->height;
694 info->var.yres_virtual = par->height;
695
696 info->screen_buffer = vmem;
697 info->fix.smem_start = __pa(vmem);
698 info->fix.smem_len = vmem_size;
699
700 fb_deferred_io_init(info);
701
702 i2c_set_clientdata(client, info);
703
704 if (par->reset) {
705 /* Reset the screen */
706 gpiod_set_value_cansleep(par->reset, 1);
707 udelay(4);
708 gpiod_set_value_cansleep(par->reset, 0);
709 udelay(4);
710 }
711
712 if (par->vbat_reg) {
713 ret = regulator_enable(par->vbat_reg);
714 if (ret) {
715 dev_err(dev, "failed to enable VBAT: %d\n", ret);
716 goto reset_oled_error;
717 }
718 }
719
720 ret = ssd1307fb_init(par);
721 if (ret)
722 goto regulator_enable_error;
723
724 ret = register_framebuffer(info);
725 if (ret) {
726 dev_err(dev, "Couldn't register the framebuffer\n");
727 goto panel_init_error;
728 }
729
730 snprintf(bl_name, sizeof(bl_name), "ssd1307fb%d", info->node);
731 bl = backlight_device_register(bl_name, dev, par, &ssd1307fb_bl_ops,
732 NULL);
733 if (IS_ERR(bl)) {
734 ret = PTR_ERR(bl);
735 dev_err(dev, "unable to register backlight device: %d\n", ret);
736 goto bl_init_error;
737 }
738
739 bl->props.brightness = par->contrast;
740 bl->props.max_brightness = MAX_CONTRAST;
741 info->bl_dev = bl;
742
743 dev_info(dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
744
745 return 0;
746
747 bl_init_error:
748 unregister_framebuffer(info);
749 panel_init_error:
750 if (par->device_info->need_pwm) {
751 pwm_disable(par->pwm);
752 pwm_put(par->pwm);
753 }
754 regulator_enable_error:
755 if (par->vbat_reg)
756 regulator_disable(par->vbat_reg);
757 reset_oled_error:
758 fb_deferred_io_cleanup(info);
759 fb_alloc_error:
760 framebuffer_release(info);
761 return ret;
762 }
763
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 33691 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset
@ 2020-05-13 20:58 ` kbuild test robot
0 siblings, 0 replies; 10+ messages in thread
From: kbuild test robot @ 2020-05-13 20:58 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 8387 bytes --]
Hi Rodrigo,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on next-20200512]
[cannot apply to robh/for-next linus/master linux/master v5.7-rc5 v5.7-rc4 v5.7-rc3 v5.7-rc5]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Rodrigo-Rolim-Mendes-de-Alencar/video-fbdev-ssd1307fb-Added-support-to-Column-offset/20200514-010137
base: e098d7762d602be640c53565ceca342f81e55ad2
config: parisc-randconfig-r022-20200513 (attached as .config)
compiler: hppa-linux-gcc (GCC) 9.3.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day GCC_VERSION=9.3.0 make.cross ARCH=parisc
If you fix the issue, kindly add following tag as appropriate
Reported-by: kbuild test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/video/fbdev/ssd1307fb.c: In function 'ssd1307fb_probe':
>> drivers/video/fbdev/ssd1307fb.c:630:31: error: 'node' undeclared (first use in this function); did you mean 'inode'?
630 | if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
| ^~~~
| inode
drivers/video/fbdev/ssd1307fb.c:630:31: note: each undeclared identifier is reported only once for each function it appears in
vim +630 drivers/video/fbdev/ssd1307fb.c
579
580 static int ssd1307fb_probe(struct i2c_client *client)
581 {
582 struct device *dev = &client->dev;
583 struct backlight_device *bl;
584 char bl_name[12];
585 struct fb_info *info;
586 struct fb_deferred_io *ssd1307fb_defio;
587 u32 vmem_size;
588 struct ssd1307fb_par *par;
589 void *vmem;
590 int ret;
591
592 info = framebuffer_alloc(sizeof(struct ssd1307fb_par), dev);
593 if (!info)
594 return -ENOMEM;
595
596 par = info->par;
597 par->info = info;
598 par->client = client;
599
600 par->device_info = device_get_match_data(dev);
601
602 par->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
603 if (IS_ERR(par->reset)) {
604 dev_err(dev, "failed to get reset gpio: %ld\n",
605 PTR_ERR(par->reset));
606 ret = PTR_ERR(par->reset);
607 goto fb_alloc_error;
608 }
609
610 par->vbat_reg = devm_regulator_get_optional(dev, "vbat");
611 if (IS_ERR(par->vbat_reg)) {
612 ret = PTR_ERR(par->vbat_reg);
613 if (ret == -ENODEV) {
614 par->vbat_reg = NULL;
615 } else {
616 dev_err(dev, "failed to get VBAT regulator: %d\n", ret);
617 goto fb_alloc_error;
618 }
619 }
620
621 if (device_property_read_u32(dev, "solomon,width", &par->width))
622 par->width = 96;
623
624 if (device_property_read_u32(dev, "solomon,height", &par->height))
625 par->height = 16;
626
627 if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset))
628 par->page_offset = 1;
629
> 630 if (device_property_read_u32(node, "solomon,col-offset", &par->col_offset))
631 par->col_offset = 0;
632
633 if (device_property_read_u32(dev, "solomon,com-offset", &par->com_offset))
634 par->com_offset = 0;
635
636 if (device_property_read_u32(dev, "solomon,prechargep1", &par->prechargep1))
637 par->prechargep1 = 2;
638
639 if (device_property_read_u32(dev, "solomon,prechargep2", &par->prechargep2))
640 par->prechargep2 = 2;
641
642 if (!device_property_read_u8_array(dev, "solomon,lookup-table",
643 par->lookup_table,
644 ARRAY_SIZE(par->lookup_table)))
645 par->lookup_table_set = 1;
646
647 par->seg_remap = !device_property_read_bool(dev, "solomon,segment-no-remap");
648 par->com_seq = device_property_read_bool(dev, "solomon,com-seq");
649 par->com_lrremap = device_property_read_bool(dev, "solomon,com-lrremap");
650 par->com_invdir = device_property_read_bool(dev, "solomon,com-invdir");
651 par->area_color_enable =
652 device_property_read_bool(dev, "solomon,area-color-enable");
653 par->low_power = device_property_read_bool(dev, "solomon,low-power");
654
655 par->contrast = 127;
656 par->vcomh = par->device_info->default_vcomh;
657
658 /* Setup display timing */
659 if (device_property_read_u32(dev, "solomon,dclk-div", &par->dclk_div))
660 par->dclk_div = par->device_info->default_dclk_div;
661 if (device_property_read_u32(dev, "solomon,dclk-frq", &par->dclk_frq))
662 par->dclk_frq = par->device_info->default_dclk_frq;
663
664 vmem_size = DIV_ROUND_UP(par->width, 8) * par->height;
665
666 vmem = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
667 get_order(vmem_size));
668 if (!vmem) {
669 dev_err(dev, "Couldn't allocate graphical memory.\n");
670 ret = -ENOMEM;
671 goto fb_alloc_error;
672 }
673
674 ssd1307fb_defio = devm_kzalloc(dev, sizeof(*ssd1307fb_defio),
675 GFP_KERNEL);
676 if (!ssd1307fb_defio) {
677 dev_err(dev, "Couldn't allocate deferred io.\n");
678 ret = -ENOMEM;
679 goto fb_alloc_error;
680 }
681
682 ssd1307fb_defio->delay = HZ / refreshrate;
683 ssd1307fb_defio->deferred_io = ssd1307fb_deferred_io;
684
685 info->fbops = &ssd1307fb_ops;
686 info->fix = ssd1307fb_fix;
687 info->fix.line_length = DIV_ROUND_UP(par->width, 8);
688 info->fbdefio = ssd1307fb_defio;
689
690 info->var = ssd1307fb_var;
691 info->var.xres = par->width;
692 info->var.xres_virtual = par->width;
693 info->var.yres = par->height;
694 info->var.yres_virtual = par->height;
695
696 info->screen_buffer = vmem;
697 info->fix.smem_start = __pa(vmem);
698 info->fix.smem_len = vmem_size;
699
700 fb_deferred_io_init(info);
701
702 i2c_set_clientdata(client, info);
703
704 if (par->reset) {
705 /* Reset the screen */
706 gpiod_set_value_cansleep(par->reset, 1);
707 udelay(4);
708 gpiod_set_value_cansleep(par->reset, 0);
709 udelay(4);
710 }
711
712 if (par->vbat_reg) {
713 ret = regulator_enable(par->vbat_reg);
714 if (ret) {
715 dev_err(dev, "failed to enable VBAT: %d\n", ret);
716 goto reset_oled_error;
717 }
718 }
719
720 ret = ssd1307fb_init(par);
721 if (ret)
722 goto regulator_enable_error;
723
724 ret = register_framebuffer(info);
725 if (ret) {
726 dev_err(dev, "Couldn't register the framebuffer\n");
727 goto panel_init_error;
728 }
729
730 snprintf(bl_name, sizeof(bl_name), "ssd1307fb%d", info->node);
731 bl = backlight_device_register(bl_name, dev, par, &ssd1307fb_bl_ops,
732 NULL);
733 if (IS_ERR(bl)) {
734 ret = PTR_ERR(bl);
735 dev_err(dev, "unable to register backlight device: %d\n", ret);
736 goto bl_init_error;
737 }
738
739 bl->props.brightness = par->contrast;
740 bl->props.max_brightness = MAX_CONTRAST;
741 info->bl_dev = bl;
742
743 dev_info(dev, "fb%d: %s framebuffer device registered, using %d bytes of video memory\n", info->node, info->fix.id, vmem_size);
744
745 return 0;
746
747 bl_init_error:
748 unregister_framebuffer(info);
749 panel_init_error:
750 if (par->device_info->need_pwm) {
751 pwm_disable(par->pwm);
752 pwm_put(par->pwm);
753 }
754 regulator_enable_error:
755 if (par->vbat_reg)
756 regulator_disable(par->vbat_reg);
757 reset_oled_error:
758 fb_deferred_io_cleanup(info);
759 fb_alloc_error:
760 framebuffer_release(info);
761 return ret;
762 }
763
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 33691 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-05-13 21:06 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-13 16:56 [PATCH v2] video: fbdev: ssd1307fb: Added support to Column offset Rodrigo Rolim Mendes de Alencar
2020-05-13 16:56 ` Rodrigo Rolim Mendes de Alencar
2020-05-13 17:13 ` Andy Shevchenko
2020-05-13 17:13 ` Andy Shevchenko
2020-05-13 17:20 ` Rodrigo Alencar
2020-05-13 17:20 ` Rodrigo Alencar
2020-05-13 20:11 ` kbuild test robot
2020-05-13 20:58 ` kbuild test robot
2020-05-13 20:58 ` kbuild test robot
2020-05-13 20:58 ` kbuild test robot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.