[PATCH] MIPS: dts: mscc: Updated changed name for miim pinctrl function

[PATCH] MIPS: dts: mscc: Updated changed name for miim pinctrl function

[Lars Povlsen]

This is an add-on patch to the main SoC Sparx5 series
(Message-ID: <20200513125532.24585-1-lars.povlsen@microchip.com>).

This changes the miim pinctrl function name from "miim1" to "miim" due
to refactoring in the driver, obsoleting the instance number.

The change in the driver was to better fit new platforms, as the
instance number is redundant information. Specifically, support for
the Microchip Sparx5 SoC is being submitted, where this change became
necessary.

Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 arch/mips/boot/dts/mscc/ocelot.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index 797d336db54d3..f94e8a02ed06b 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -214,7 +214,7 @@ uart2_pins: uart2-pins {

 			miim1: miim1 {
 				pins = "GPIO_14", "GPIO_15";
-				function = "miim1";
+				function = "miim";
 			};

 		};
--
2.26.2

Re: [PATCH] MIPS: dts: mscc: Updated changed name for miim pinctrl function

[Alexandre Belloni]

On 13/05/2020 15:23:47+0200, Lars Povlsen wrote:
> This is an add-on patch to the main SoC Sparx5 series
> (Message-ID: <20200513125532.24585-1-lars.povlsen@microchip.com>).
> 
> This changes the miim pinctrl function name from "miim1" to "miim" due
> to refactoring in the driver, obsoleting the instance number.
> 
> The change in the driver was to better fit new platforms, as the
> instance number is redundant information. Specifically, support for
> the Microchip Sparx5 SoC is being submitted, where this change became
> necessary.
> 
> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
>  arch/mips/boot/dts/mscc/ocelot.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
> index 797d336db54d3..f94e8a02ed06b 100644
> --- a/arch/mips/boot/dts/mscc/ocelot.dtsi
> +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
> @@ -214,7 +214,7 @@ uart2_pins: uart2-pins {
> 
>  			miim1: miim1 {
>  				pins = "GPIO_14", "GPIO_15";
> -				function = "miim1";
> +				function = "miim";
>  			};
> 
>  		};
> --
> 2.26.2

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH] MIPS: dts: mscc: Updated changed name for miim pinctrl function

[Thomas Bogendoerfer]

On Wed, May 13, 2020 at 03:23:47PM +0200, Lars Povlsen wrote:
> This is an add-on patch to the main SoC Sparx5 series
> (Message-ID: <20200513125532.24585-1-lars.povlsen@microchip.com>).
> 
> This changes the miim pinctrl function name from "miim1" to "miim" due
> to refactoring in the driver, obsoleting the instance number.
> 
> The change in the driver was to better fit new platforms, as the
> instance number is redundant information. Specifically, support for
> the Microchip Sparx5 SoC is being submitted, where this change became
> necessary.
> 
> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
> ---
>  arch/mips/boot/dts/mscc/ocelot.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]