[Intel-gfx] [PATCH v30 0/3] SAGV support for Gen12+

[Intel-gfx] [PATCH v30 0/3] SAGV support for Gen12+

[Stanislav Lisovskiy]

For Gen11+ platforms BSpec suggests disabling specific
QGV points separately, depending on bandwidth limitations
and current display configuration. Thus it required adding
a new PCode request for disabling QGV points and some
refactoring of already existing SAGV code.
Also had to refactor intel_can_enable_sagv function,
as current seems to be outdated and using skl specific
workarounds, also not following BSpec for Gen11+.

v25: Rebased patch series as part was merged already
v26: Had to resend the whole series as one more mid patch was added
v27: Patches 2,3,7 were pushed, have to resend the series to prevent
     build failure.
v28: PCode patch was merged, one patch was added, sent new series.
v30: 3 patches merged, resending the rest with comments fixed

Stanislav Lisovskiy (3):
  drm/i915: Add TGL+ SAGV support
  drm/i915: Restrict qgv points which don't have enough bandwidth.
  drm/i915: Enable SAGV support for Gen12

 drivers/gpu/drm/i915/display/intel_bw.c       | 137 ++++++++++----
 drivers/gpu/drm/i915/display/intel_bw.h       |   9 +
 drivers/gpu/drm/i915/display/intel_display.c  |   8 +-
 .../drm/i915/display/intel_display_types.h    |   5 +
 drivers/gpu/drm/i915/intel_pm.c               | 168 +++++++++++++++---
 drivers/gpu/drm/i915/intel_pm.h               |   2 +
 6 files changed, 268 insertions(+), 61 deletions(-)

-- 
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v30 1/3] drm/i915: Add TGL+ SAGV support

[Stanislav Lisovskiy]

Starting from TGL we need to have a separate wm0
values for SAGV and non-SAGV which affects
how calculations are done.

v2: Remove long lines
v3: Removed COLOR_PLANE enum references
v4, v5, v6: Fixed rebase conflict
v7: - Removed skl_plane_wm_level accessor from skl_allocate_pipe_ddb(Ville)
    - Removed sagv_uv_wm0(Ville)
    - can_sagv->use_sagv_wm(Ville)

v8: - Moved tgl_crtc_can_enable_sagv function up(Ville)
    - Changed comment regarding pipe_wm usage(Ville)
    - Call intel_can_enable_sagv and tgl_compute_sagv_wm only
      for Gen12(Ville)
    - Some sagv debugs removed(Ville)
    - skl_print_wm_changes improvements(Ville)
    - Do assignment instead of memcpy in
      skl_pipe_wm_get_hw_state(Ville)

v9: - Removed can_sagv variable(Ville)
    - Removed spurious line(Ville)
    - Changed u32 to unsigned int as agreed(Ville)
    - Assign sagv only for gen12 in
      skl_pipe_wm_get_hw_state(Ville)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c  |   8 +-
 .../drm/i915/display/intel_display_types.h    |   2 +
 drivers/gpu/drm/i915/intel_pm.c               | 110 +++++++++++++++---
 3 files changed, 101 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 432b4eeaf9f6..b128fc859b20 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -13961,7 +13961,9 @@ static void verify_wm_state(struct intel_crtc *crtc,
 		/* Watermarks */
 		for (level = 0; level <= max_level; level++) {
 			if (skl_wm_level_equals(&hw_plane_wm->wm[level],
-						&sw_plane_wm->wm[level]))
+						&sw_plane_wm->wm[level]) ||
+			    (level == 0 && skl_wm_level_equals(&hw_plane_wm->wm[level],
+							       &sw_plane_wm->sagv_wm0)))
 				continue;
 
 			drm_err(&dev_priv->drm,
@@ -14016,7 +14018,9 @@ static void verify_wm_state(struct intel_crtc *crtc,
 		/* Watermarks */
 		for (level = 0; level <= max_level; level++) {
 			if (skl_wm_level_equals(&hw_plane_wm->wm[level],
-						&sw_plane_wm->wm[level]))
+						&sw_plane_wm->wm[level]) ||
+			    (level == 0 && skl_wm_level_equals(&hw_plane_wm->wm[level],
+							       &sw_plane_wm->sagv_wm0)))
 				continue;
 
 			drm_err(&dev_priv->drm,
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 87876fce91a5..2bf3d4cb4ea9 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -688,11 +688,13 @@ struct skl_plane_wm {
 	struct skl_wm_level wm[8];
 	struct skl_wm_level uv_wm[8];
 	struct skl_wm_level trans_wm;
+	struct skl_wm_level sagv_wm0;
 	bool is_planar;
 };
 
 struct skl_pipe_wm {
 	struct skl_plane_wm planes[I915_MAX_PLANES];
+	bool use_sagv_wm;
 };
 
 enum vlv_wm_level {
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index f7bd1dbb625e..c52b941df5d6 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3853,9 +3853,38 @@ static bool skl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
 	return true;
 }
 
+static bool tgl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	enum plane_id plane_id;
+
+	if (!crtc_state->hw.active)
+		return true;
+
+	for_each_plane_id_on_crtc(crtc, plane_id) {
+		const struct skl_ddb_entry *plane_alloc =
+			&crtc_state->wm.skl.plane_ddb_y[plane_id];
+		const struct skl_plane_wm *wm =
+			&crtc_state->wm.skl.optimal.planes[plane_id];
+
+		if (skl_ddb_entry_size(plane_alloc) < wm->sagv_wm0.min_ddb_alloc)
+			return false;
+	}
+
+	return true;
+}
+
 static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
 {
-	return skl_crtc_can_enable_sagv(crtc_state);
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+
+	if (INTEL_GEN(dev_priv) >= 12)
+		return tgl_crtc_can_enable_sagv(crtc_state);
+	else
+		return skl_crtc_can_enable_sagv(crtc_state);
+
+	return false;
 }
 
 bool intel_can_enable_sagv(struct drm_i915_private *dev_priv,
@@ -3873,7 +3902,7 @@ static int intel_compute_sagv_mask(struct intel_atomic_state *state)
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
 	int ret;
 	struct intel_crtc *crtc;
-	const struct intel_crtc_state *new_crtc_state;
+	struct intel_crtc_state *new_crtc_state;
 	struct intel_bw_state *new_bw_state = NULL;
 	const struct intel_bw_state *old_bw_state = NULL;
 	int i;
@@ -3904,6 +3933,20 @@ static int intel_compute_sagv_mask(struct intel_atomic_state *state)
 			return ret;
 	}
 
+	for_each_new_intel_crtc_in_state(state, crtc,
+					 new_crtc_state, i) {
+		struct skl_pipe_wm *pipe_wm = &new_crtc_state->wm.skl.optimal;
+
+		/*
+		 * We store use_sagv_wm in the crtc state rather than relying on
+		 * that bw state since we have no convenient way to get at the
+		 * latter from the plane commit hooks (especially in the legacy
+		 * cursor case)
+		 */
+		pipe_wm->use_sagv_wm = INTEL_GEN(dev_priv) >= 12 &&
+				       intel_can_enable_sagv(dev_priv, new_bw_state);
+	}
+
 	if (intel_can_enable_sagv(dev_priv, new_bw_state) !=
 	    intel_can_enable_sagv(dev_priv, old_bw_state)) {
 		ret = intel_atomic_serialize_global_state(&new_bw_state->base);
@@ -4647,8 +4690,11 @@ skl_plane_wm_level(const struct intel_crtc_state *crtc_state,
 		   enum plane_id plane_id,
 		   int level)
 {
-	const struct skl_plane_wm *wm =
-		&crtc_state->wm.skl.optimal.planes[plane_id];
+	const struct skl_pipe_wm *pipe_wm = &crtc_state->wm.skl.optimal;
+	const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id];
+
+	if (level == 0 && pipe_wm->use_sagv_wm)
+		return &wm->sagv_wm0;
 
 	return &wm->wm[level];
 }
@@ -4689,7 +4735,6 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state)
 							 plane_data_rate,
 							 uv_plane_data_rate);
 
-
 	skl_ddb_get_pipe_allocation_limits(dev_priv, crtc_state, total_data_rate,
 					   alloc, &num_active);
 	alloc_size = skl_ddb_entry_size(alloc);
@@ -5225,6 +5270,20 @@ skl_compute_wm_levels(const struct intel_crtc_state *crtc_state,
 	}
 }
 
+static void tgl_compute_sagv_wm(const struct intel_crtc_state *crtc_state,
+				const struct skl_wm_params *wm_params,
+				struct skl_plane_wm *plane_wm)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
+	struct skl_wm_level *sagv_wm = &plane_wm->sagv_wm0;
+	struct skl_wm_level *levels = plane_wm->wm;
+	unsigned int latency = dev_priv->wm.skl_latency[0] + dev_priv->sagv_block_time_us;
+
+	skl_compute_plane_wm(crtc_state, 0, latency,
+			     wm_params, &levels[0],
+			     sagv_wm);
+}
+
 static void skl_compute_transition_wm(const struct intel_crtc_state *crtc_state,
 				      const struct skl_wm_params *wp,
 				      struct skl_plane_wm *wm)
@@ -5292,6 +5351,8 @@ static int skl_build_plane_wm_single(struct intel_crtc_state *crtc_state,
 				     const struct intel_plane_state *plane_state,
 				     enum plane_id plane_id, int color_plane)
 {
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	struct skl_plane_wm *wm = &crtc_state->wm.skl.optimal.planes[plane_id];
 	struct skl_wm_params wm_params;
 	int ret;
@@ -5302,6 +5363,10 @@ static int skl_build_plane_wm_single(struct intel_crtc_state *crtc_state,
 		return ret;
 
 	skl_compute_wm_levels(crtc_state, &wm_params, wm->wm);
+
+	if (INTEL_GEN(dev_priv) >= 12)
+		tgl_compute_sagv_wm(crtc_state, &wm_params, wm);
+
 	skl_compute_transition_wm(crtc_state, &wm_params, wm);
 
 	return 0;
@@ -5668,23 +5733,25 @@ skl_print_wm_changes(struct intel_atomic_state *state)
 				continue;
 
 			drm_dbg_kms(&dev_priv->drm,
-				    "[PLANE:%d:%s]   level %cwm0,%cwm1,%cwm2,%cwm3,%cwm4,%cwm5,%cwm6,%cwm7,%ctwm"
-				    " -> %cwm0,%cwm1,%cwm2,%cwm3,%cwm4,%cwm5,%cwm6,%cwm7,%ctwm\n",
+				    "[PLANE:%d:%s]   level %cwm0,%cwm1,%cwm2,%cwm3,%cwm4,%cwm5,%cwm6,%cwm7,%ctwm,%cswm"
+				    " -> %cwm0,%cwm1,%cwm2,%cwm3,%cwm4,%cwm5,%cwm6,%cwm7,%ctwm,%cswm\n",
 				    plane->base.base.id, plane->base.name,
 				    enast(old_wm->wm[0].plane_en), enast(old_wm->wm[1].plane_en),
 				    enast(old_wm->wm[2].plane_en), enast(old_wm->wm[3].plane_en),
 				    enast(old_wm->wm[4].plane_en), enast(old_wm->wm[5].plane_en),
 				    enast(old_wm->wm[6].plane_en), enast(old_wm->wm[7].plane_en),
 				    enast(old_wm->trans_wm.plane_en),
+				    enast(old_wm->sagv_wm0.plane_en),
 				    enast(new_wm->wm[0].plane_en), enast(new_wm->wm[1].plane_en),
 				    enast(new_wm->wm[2].plane_en), enast(new_wm->wm[3].plane_en),
 				    enast(new_wm->wm[4].plane_en), enast(new_wm->wm[5].plane_en),
 				    enast(new_wm->wm[6].plane_en), enast(new_wm->wm[7].plane_en),
-				    enast(new_wm->trans_wm.plane_en));
+				    enast(new_wm->trans_wm.plane_en),
+				    enast(new_wm->sagv_wm0.plane_en));
 
 			drm_dbg_kms(&dev_priv->drm,
-				    "[PLANE:%d:%s]   lines %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d"
-				      " -> %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d\n",
+				    "[PLANE:%d:%s]   lines %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d"
+				      " -> %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d\n",
 				    plane->base.base.id, plane->base.name,
 				    enast(old_wm->wm[0].ignore_lines), old_wm->wm[0].plane_res_l,
 				    enast(old_wm->wm[1].ignore_lines), old_wm->wm[1].plane_res_l,
@@ -5695,6 +5762,7 @@ skl_print_wm_changes(struct intel_atomic_state *state)
 				    enast(old_wm->wm[6].ignore_lines), old_wm->wm[6].plane_res_l,
 				    enast(old_wm->wm[7].ignore_lines), old_wm->wm[7].plane_res_l,
 				    enast(old_wm->trans_wm.ignore_lines), old_wm->trans_wm.plane_res_l,
+				    enast(old_wm->sagv_wm0.ignore_lines), old_wm->sagv_wm0.plane_res_l,
 
 				    enast(new_wm->wm[0].ignore_lines), new_wm->wm[0].plane_res_l,
 				    enast(new_wm->wm[1].ignore_lines), new_wm->wm[1].plane_res_l,
@@ -5704,37 +5772,42 @@ skl_print_wm_changes(struct intel_atomic_state *state)
 				    enast(new_wm->wm[5].ignore_lines), new_wm->wm[5].plane_res_l,
 				    enast(new_wm->wm[6].ignore_lines), new_wm->wm[6].plane_res_l,
 				    enast(new_wm->wm[7].ignore_lines), new_wm->wm[7].plane_res_l,
-				    enast(new_wm->trans_wm.ignore_lines), new_wm->trans_wm.plane_res_l);
+				    enast(new_wm->trans_wm.ignore_lines), new_wm->trans_wm.plane_res_l,
+				    enast(new_wm->sagv_wm0.ignore_lines), new_wm->sagv_wm0.plane_res_l);
 
 			drm_dbg_kms(&dev_priv->drm,
-				    "[PLANE:%d:%s]  blocks %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d"
-				    " -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d\n",
+				    "[PLANE:%d:%s]  blocks %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d"
+				    " -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d\n",
 				    plane->base.base.id, plane->base.name,
 				    old_wm->wm[0].plane_res_b, old_wm->wm[1].plane_res_b,
 				    old_wm->wm[2].plane_res_b, old_wm->wm[3].plane_res_b,
 				    old_wm->wm[4].plane_res_b, old_wm->wm[5].plane_res_b,
 				    old_wm->wm[6].plane_res_b, old_wm->wm[7].plane_res_b,
 				    old_wm->trans_wm.plane_res_b,
+				    old_wm->sagv_wm0.plane_res_b,
 				    new_wm->wm[0].plane_res_b, new_wm->wm[1].plane_res_b,
 				    new_wm->wm[2].plane_res_b, new_wm->wm[3].plane_res_b,
 				    new_wm->wm[4].plane_res_b, new_wm->wm[5].plane_res_b,
 				    new_wm->wm[6].plane_res_b, new_wm->wm[7].plane_res_b,
-				    new_wm->trans_wm.plane_res_b);
+				    new_wm->trans_wm.plane_res_b,
+				    new_wm->sagv_wm0.plane_res_b);
 
 			drm_dbg_kms(&dev_priv->drm,
-				    "[PLANE:%d:%s] min_ddb %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d"
-				    " -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d\n",
+				    "[PLANE:%d:%s] min_ddb %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d"
+				    " -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d\n",
 				    plane->base.base.id, plane->base.name,
 				    old_wm->wm[0].min_ddb_alloc, old_wm->wm[1].min_ddb_alloc,
 				    old_wm->wm[2].min_ddb_alloc, old_wm->wm[3].min_ddb_alloc,
 				    old_wm->wm[4].min_ddb_alloc, old_wm->wm[5].min_ddb_alloc,
 				    old_wm->wm[6].min_ddb_alloc, old_wm->wm[7].min_ddb_alloc,
 				    old_wm->trans_wm.min_ddb_alloc,
+				    old_wm->sagv_wm0.min_ddb_alloc,
 				    new_wm->wm[0].min_ddb_alloc, new_wm->wm[1].min_ddb_alloc,
 				    new_wm->wm[2].min_ddb_alloc, new_wm->wm[3].min_ddb_alloc,
 				    new_wm->wm[4].min_ddb_alloc, new_wm->wm[5].min_ddb_alloc,
 				    new_wm->wm[6].min_ddb_alloc, new_wm->wm[7].min_ddb_alloc,
-				    new_wm->trans_wm.min_ddb_alloc);
+				    new_wm->trans_wm.min_ddb_alloc,
+				    new_wm->sagv_wm0.min_ddb_alloc);
 		}
 	}
 }
@@ -6027,6 +6100,9 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
 			skl_wm_level_from_reg_val(val, &wm->wm[level]);
 		}
 
+		if (INTEL_GEN(dev_priv) >= 12)
+			wm->sagv_wm0 = wm->wm[0];
+
 		if (plane_id != PLANE_CURSOR)
 			val = I915_READ(PLANE_WM_TRANS(pipe, plane_id));
 		else
-- 
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v30 2/3] drm/i915: Restrict qgv points which don't have enough bandwidth.

[Stanislav Lisovskiy]

According to BSpec 53998, we should try to
restrict qgv points, which can't provide
enough bandwidth for desired display configuration.

Currently we are just comparing against all of
those and take minimum(worst case).

v2: Fixed wrong PCode reply mask, removed hardcoded
    values.

v3: Forbid simultaneous legacy SAGV PCode requests and
    restricting qgv points. Put the actual restriction
    to commit function, added serialization(thanks to Ville)
    to prevent commit being applied out of order in case of
    nonblocking and/or nomodeset commits.

v4:
    - Minor code refactoring, fixed few typos(thanks to James Ausmus)
    - Change the naming of qgv point
      masking/unmasking functions(James Ausmus).
    - Simplify the masking/unmasking operation itself,
      as we don't need to mask only single point per request(James Ausmus)
    - Reject and stick to highest bandwidth point if SAGV
      can't be enabled(BSpec)

v5:
    - Add new mailbox reply codes, which seems to happen during boot
      time for TGL and indicate that QGV setting is not yet available.

v6:
    - Increase number of supported QGV points to be in sync with BSpec.

v7: - Rebased and resolved conflict to fix build failure.
    - Fix NUM_QGV_POINTS to 8 and moved that to header file(James Ausmus)

v8: - Don't report an error if we can't restrict qgv points, as SAGV
      can be disabled by BIOS, which is completely legal. So don't
      make CI panic. Instead if we detect that there is only 1 QGV
      point accessible just analyze if we can fit the required bandwidth
      requirements, but no need in restricting.

v9: - Fix wrong QGV transition if we have 0 planes and no SAGV
      simultaneously.

v10: - Fix CDCLK corruption, because of global state getting serialized
       without modeset, which caused copying of non-calculated cdclk
       to be copied to dev_priv(thanks to Ville for the hint).

v11: - Remove unneeded headers and spaces(Matthew Roper)
     - Remove unneeded intel_qgv_info qi struct from bw check and zero
       out the needed one(Matthew Roper)
     - Changed QGV error message to have more clear meaning(Matthew Roper)
     - Use state->modeset_set instead of any_ms(Matthew Roper)
     - Moved NUM_SAGV_POINTS from i915_reg.h to i915_drv.h where it's used
     - Keep using crtc_state->hw.active instead of .enable(Matthew Roper)
     - Moved unrelated changes to other patch(using latency as parameter
       for plane wm calculation, moved to SAGV refactoring patch)

v12: - Fix rebase conflict with own temporary SAGV/QGV fix.
     - Remove unnecessary mask being zero check when unmasking
       qgv points as this is completely legal(Matt Roper)
     - Check if we are setting the same mask as already being set
       in hardware to prevent error from PCode.
     - Fix error message when restricting/unrestricting qgv points
       to "mask/unmask" which sounds more accurate(Matt Roper)
     - Move sagv status setting to icl_get_bw_info from atomic check
       as this should be calculated only once.(Matt Roper)
     - Edited comments for the case when we can't enable SAGV and
       use only 1 QGV point with highest bandwidth to be more
       understandable.(Matt Roper)

v13: - Moved max_data_rate in bw check to closer scope(Ville Syrjälä)
     - Changed comment for zero new_mask in qgv points masking function
       to better reflect reality(Ville Syrjälä)
     - Simplified bit mask operation in qgv points masking function
       (Ville Syrjälä)
     - Moved intel_qgv_points_mask closer to gen11 SAGV disabling,
       however this still can't be under modeset condition(Ville Syrjälä)
     - Packed qgv_points_mask as u8 and moved closer to pipe_sagv_mask
       (Ville Syrjälä)
     - Extracted PCode changes to separate patch.(Ville Syrjälä)
     - Now treat num_planes 0 same as 1 to avoid confusion and
       returning max_bw as 0, which would prevent choosing QGV
       point having max bandwidth in case if SAGV is not allowed,
       as per BSpec(Ville Syrjälä)
     - Do the actual qgv_points_mask swap in the same place as
       all other global state parts like cdclk are swapped.
       In the next patch, this all will be moved to bw state as
       global state, once new global state patch series from Ville
       lands

v14: - Now using global state to serialize access to qgv points
     - Added global state locking back, otherwise we seem to read
       bw state in a wrong way.

v15: - Added TODO comment for near atomic global state locking in
       bw code.

v16: - Fixed intel_atomic_bw_* functions to be intel_bw_* as discussed
       with Jani Nikula.
     - Take bw_state_changed flag into use.

v17: - Moved qgv point related manipulations next to SAGV code, as
       those are semantically related(Ville Syrjälä)
     - Renamed those into intel_sagv_(pre)|(post)_plane_update
       (Ville Syrjälä)

v18: - Move sagv related calls from commit tail into
       intel_sagv_(pre)|(post)_plane_update(Ville Syrjälä)

v19: - Use intel_atomic_get_bw_(old)|(new)_state which is intended
       for commit tail stage.

v20: - Return max bandwidth for 0 planes(Ville)
     - Constify old_bw_state in bw_atomic_check(Ville)
     - Removed some debugs(Ville)
     - Added data rate to debug print when no QGV points(Ville)
     - Removed some comments(Ville)

v21, v22, v23: - Fixed rebase conflict

v24: - Changed PCode mask to use ICL_ prefix
v25: - Resolved rebase conflict

v26: - Removed redundant NULL checks(Ville)
     - Removed redundant error prints(Ville)

v27: - Use device specific drm_err(Ville)
     - Fixed parenthesis ident reported by checkpatch
       Line over 100 warns to be fixed together with
       existing code style.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
---
 drivers/gpu/drm/i915/display/intel_bw.c       | 137 +++++++++++++-----
 drivers/gpu/drm/i915/display/intel_bw.h       |   9 ++
 .../drm/i915/display/intel_display_types.h    |   3 +
 drivers/gpu/drm/i915/intel_pm.c               |  54 ++++++-
 drivers/gpu/drm/i915/intel_pm.h               |   2 +
 5 files changed, 167 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
index 6e7cc3a4f1aa..fef04e2d954e 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -8,6 +8,9 @@
 #include "intel_bw.h"
 #include "intel_display_types.h"
 #include "intel_sideband.h"
+#include "intel_atomic.h"
+#include "intel_pm.h"
+
 
 /* Parameters for Qclk Geyserville (QGV) */
 struct intel_qgv_point {
@@ -113,6 +116,26 @@ static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
 	return 0;
 }
 
+int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
+				  u32 points_mask)
+{
+	int ret;
+
+	/* bspec says to keep retrying for at least 1 ms */
+	ret = skl_pcode_request(dev_priv, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
+				points_mask,
+				ICL_PCODE_POINTS_RESTRICTED_MASK,
+				ICL_PCODE_POINTS_RESTRICTED,
+				1);
+
+	if (ret < 0) {
+		drm_err(&dev_priv->drm, "Failed to disable qgv points (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
 			      struct intel_qgv_info *qi)
 {
@@ -240,6 +263,16 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel
 			break;
 	}
 
+	/*
+	 * In case if SAGV is disabled in BIOS, we always get 1
+	 * SAGV point, but we can't send PCode commands to restrict it
+	 * as it will fail and pointless anyway.
+	 */
+	if (qi.num_points == 1)
+		dev_priv->sagv_status = I915_SAGV_NOT_CONTROLLED;
+	else
+		dev_priv->sagv_status = I915_SAGV_ENABLED;
+
 	return 0;
 }
 
@@ -248,6 +281,11 @@ static unsigned int icl_max_bw(struct drm_i915_private *dev_priv,
 {
 	int i;
 
+	/*
+	 * Let's return max bw for 0 planes
+	 */
+	num_planes = max(1, num_planes);
+
 	for (i = 0; i < ARRAY_SIZE(dev_priv->max_bw); i++) {
 		const struct intel_bw_info *bi =
 			&dev_priv->max_bw[i];
@@ -277,34 +315,6 @@ void intel_bw_init_hw(struct drm_i915_private *dev_priv)
 		icl_get_bw_info(dev_priv, &icl_sa_info);
 }
 
-static unsigned int intel_max_data_rate(struct drm_i915_private *dev_priv,
-					int num_planes)
-{
-	if (INTEL_GEN(dev_priv) >= 11) {
-		/*
-		 * Any bw group has same amount of QGV points
-		 */
-		const struct intel_bw_info *bi =
-			&dev_priv->max_bw[0];
-		unsigned int min_bw = UINT_MAX;
-		int i;
-
-		/*
-		 * FIXME with SAGV disabled maybe we can assume
-		 * point 1 will always be used? Seems to match
-		 * the behaviour observed in the wild.
-		 */
-		for (i = 0; i < bi->num_qgv_points; i++) {
-			unsigned int bw = icl_max_bw(dev_priv, num_planes, i);
-
-			min_bw = min(bw, min_bw);
-		}
-		return min_bw;
-	} else {
-		return UINT_MAX;
-	}
-}
-
 static unsigned int intel_bw_crtc_num_active_planes(const struct intel_crtc_state *crtc_state)
 {
 	/*
@@ -415,10 +425,15 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
 	struct intel_crtc_state *new_crtc_state, *old_crtc_state;
 	struct intel_bw_state *new_bw_state = NULL;
-	unsigned int data_rate, max_data_rate;
+	const struct intel_bw_state *old_bw_state = NULL;
+	unsigned int data_rate;
 	unsigned int num_active_planes;
 	struct intel_crtc *crtc;
 	int i, ret;
+	u32 allowed_points = 0;
+	unsigned int max_bw_point = 0, max_bw = 0;
+	unsigned int num_qgv_points = dev_priv->max_bw[0].num_qgv_points;
+	u32 mask = (1 << num_qgv_points) - 1;
 
 	/* FIXME earlier gens need some checks too */
 	if (INTEL_GEN(dev_priv) < 11)
@@ -465,19 +480,71 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
 		return ret;
 
 	data_rate = intel_bw_data_rate(dev_priv, new_bw_state);
+	data_rate = DIV_ROUND_UP(data_rate, 1000);
+
 	num_active_planes = intel_bw_num_active_planes(dev_priv, new_bw_state);
 
-	max_data_rate = intel_max_data_rate(dev_priv, num_active_planes);
+	for (i = 0; i < num_qgv_points; i++) {
+		unsigned int max_data_rate;
 
-	data_rate = DIV_ROUND_UP(data_rate, 1000);
+		max_data_rate = icl_max_bw(dev_priv, num_active_planes, i);
+		/*
+		 * We need to know which qgv point gives us
+		 * maximum bandwidth in order to disable SAGV
+		 * if we find that we exceed SAGV block time
+		 * with watermarks. By that moment we already
+		 * have those, as it is calculated earlier in
+		 * intel_atomic_check,
+		 */
+		if (max_data_rate > max_bw) {
+			max_bw_point = i;
+			max_bw = max_data_rate;
+		}
+		if (max_data_rate >= data_rate)
+			allowed_points |= BIT(i);
+		drm_dbg_kms(&dev_priv->drm, "QGV point %d: max bw %d required %d\n",
+			    i, max_data_rate, data_rate);
+	}
 
-	if (data_rate > max_data_rate) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "Bandwidth %u MB/s exceeds max available %d MB/s (%d active planes)\n",
-			    data_rate, max_data_rate, num_active_planes);
+	/*
+	 * BSpec states that we always should have at least one allowed point
+	 * left, so if we couldn't - simply reject the configuration for obvious
+	 * reasons.
+	 */
+	if (allowed_points == 0) {
+		drm_dbg_kms(&dev_priv->drm, "No QGV points provide sufficient memory"
+			    " bandwidth %d for display configuration(%d active planes).\n",
+			    data_rate, num_active_planes);
 		return -EINVAL;
 	}
 
+	/*
+	 * Leave only single point with highest bandwidth, if
+	 * we can't enable SAGV due to the increased memory latency it may
+	 * cause.
+	 */
+	if (!intel_can_enable_sagv(dev_priv, new_bw_state)) {
+		allowed_points = BIT(max_bw_point);
+		drm_dbg_kms(&dev_priv->drm, "No SAGV, using single QGV point %d\n",
+			    max_bw_point);
+	}
+	/*
+	 * We store the ones which need to be masked as that is what PCode
+	 * actually accepts as a parameter.
+	 */
+	new_bw_state->qgv_points_mask = ~allowed_points & mask;
+
+	old_bw_state = intel_atomic_get_old_bw_state(state);
+	/*
+	 * If the actual mask had changed we need to make sure that
+	 * the commits are serialized(in case this is a nomodeset, nonblocking)
+	 */
+	if (new_bw_state->qgv_points_mask != old_bw_state->qgv_points_mask) {
+		ret = intel_atomic_serialize_global_state(&new_bw_state->base);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/i915/display/intel_bw.h b/drivers/gpu/drm/i915/display/intel_bw.h
index 898b4a85ccab..bbcaaa73ec1b 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.h
+++ b/drivers/gpu/drm/i915/display/intel_bw.h
@@ -24,6 +24,13 @@ struct intel_bw_state {
 	 */
 	u8 pipe_sagv_reject;
 
+	/*
+	 * Current QGV points mask, which restricts
+	 * some particular SAGV states, not to confuse
+	 * with pipe_sagv_mask.
+	 */
+	u8 qgv_points_mask;
+
 	unsigned int data_rate[I915_MAX_PIPES];
 	u8 num_active_planes[I915_MAX_PIPES];
 
@@ -47,5 +54,7 @@ int intel_bw_init(struct drm_i915_private *dev_priv);
 int intel_bw_atomic_check(struct intel_atomic_state *state);
 void intel_bw_crtc_update(struct intel_bw_state *bw_state,
 			  const struct intel_crtc_state *crtc_state);
+int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
+				  u32 points_mask);
 
 #endif /* __INTEL_BW_H__ */
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 2bf3d4cb4ea9..b485a6504bdb 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -692,6 +692,9 @@ struct skl_plane_wm {
 	bool is_planar;
 };
 
+/* BSpec precisely defines this */
+#define NUM_SAGV_POINTS 8
+
 struct skl_pipe_wm {
 	struct skl_plane_wm planes[I915_MAX_PLANES];
 	bool use_sagv_wm;
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index c52b941df5d6..f34dca8b13fb 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3762,6 +3762,8 @@ void intel_sagv_pre_plane_update(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
 	const struct intel_bw_state *new_bw_state;
+	const struct intel_bw_state *old_bw_state;
+	u32 new_mask = 0;
 
 	/*
 	 * Just return if we can't control SAGV or don't have it.
@@ -3777,15 +3779,42 @@ void intel_sagv_pre_plane_update(struct intel_atomic_state *state)
 	if (!new_bw_state)
 		return;
 
-	if (!intel_can_enable_sagv(dev_priv, new_bw_state))
+	if (INTEL_GEN(dev_priv) < 11 && !intel_can_enable_sagv(dev_priv, new_bw_state)) {
 		intel_disable_sagv(dev_priv);
+		return;
+	}
+
+	old_bw_state = intel_atomic_get_old_bw_state(state);
+	/*
+	 * Nothing to mask
+	 */
+	if (new_bw_state->qgv_points_mask == old_bw_state->qgv_points_mask)
+		return;
+
+	new_mask = old_bw_state->qgv_points_mask | new_bw_state->qgv_points_mask;
+
+	/*
+	 * If new mask is zero - means there is nothing to mask,
+	 * we can only unmask, which should be done in unmask.
+	 */
+	if (!new_mask)
+		return;
+
+	/*
+	 * Restrict required qgv points before updating the configuration.
+	 * According to BSpec we can't mask and unmask qgv points at the same
+	 * time. Also masking should be done before updating the configuration
+	 * and unmasking afterwards.
+	 */
+	icl_pcode_restrict_qgv_points(dev_priv, new_mask);
 }
 
 void intel_sagv_post_plane_update(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
 	const struct intel_bw_state *new_bw_state;
-
+	const struct intel_bw_state *old_bw_state;
+	u32 new_mask = 0;
 	/*
 	 * Just return if we can't control SAGV or don't have it.
 	 * This is different from situation when we have SAGV but just can't
@@ -3800,8 +3829,27 @@ void intel_sagv_post_plane_update(struct intel_atomic_state *state)
 	if (!new_bw_state)
 		return;
 
-	if (intel_can_enable_sagv(dev_priv, new_bw_state))
+	if (INTEL_GEN(dev_priv) < 11 && intel_can_enable_sagv(dev_priv, new_bw_state)) {
 		intel_enable_sagv(dev_priv);
+		return;
+	}
+
+	old_bw_state = intel_atomic_get_old_bw_state(state);
+	/*
+	 * Nothing to unmask
+	 */
+	if (new_bw_state->qgv_points_mask == old_bw_state->qgv_points_mask)
+		return;
+
+	new_mask = new_bw_state->qgv_points_mask;
+
+	/*
+	 * Allow required qgv points after updating the configuration.
+	 * According to BSpec we can't mask and unmask qgv points at the same
+	 * time. Also masking should be done before updating the configuration
+	 * and unmasking afterwards.
+	 */
+	icl_pcode_restrict_qgv_points(dev_priv, new_mask);
 }
 
 static bool skl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
index 614ac7f8d4cc..528aba6267da 100644
--- a/drivers/gpu/drm/i915/intel_pm.h
+++ b/drivers/gpu/drm/i915/intel_pm.h
@@ -44,6 +44,8 @@ void g4x_wm_sanitize(struct drm_i915_private *dev_priv);
 void vlv_wm_sanitize(struct drm_i915_private *dev_priv);
 bool intel_can_enable_sagv(struct drm_i915_private *dev_priv,
 			   const struct intel_bw_state *bw_state);
+void intel_sagv_pre_plane_update(struct intel_atomic_state *state);
+void intel_sagv_post_plane_update(struct intel_atomic_state *state);
 int intel_enable_sagv(struct drm_i915_private *dev_priv);
 int intel_disable_sagv(struct drm_i915_private *dev_priv);
 void intel_sagv_pre_plane_update(struct intel_atomic_state *state);
-- 
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATCH v30 3/3] drm/i915: Enable SAGV support for Gen12

[Stanislav Lisovskiy]

Flip the switch and enable SAGV support
for Gen12 also.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index f34dca8b13fb..f4469d730d9b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3638,10 +3638,6 @@ static bool skl_needs_memory_bw_wa(struct drm_i915_private *dev_priv)
 static bool
 intel_has_sagv(struct drm_i915_private *dev_priv)
 {
-	/* HACK! */
-	if (IS_GEN(dev_priv, 12))
-		return false;
-
 	return (IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) &&
 		dev_priv->sagv_status != I915_SAGV_NOT_CONTROLLED;
 }
-- 
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for SAGV support for Gen12+ (rev38)

[Patchwork]

== Series Details ==

Series: SAGV support for Gen12+ (rev38)
URL   : https://patchwork.freedesktop.org/series/75129/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
4806d3748f45 drm/i915: Add TGL+ SAGV support
-:250: WARNING:LONG_LINE: line over 100 characters
#250: FILE: drivers/gpu/drm/i915/intel_pm.c:5765:
+				    enast(old_wm->sagv_wm0.ignore_lines), old_wm->sagv_wm0.plane_res_l,

-:259: WARNING:LONG_LINE: line over 100 characters
#259: FILE: drivers/gpu/drm/i915/intel_pm.c:5775:
+				    enast(new_wm->trans_wm.ignore_lines), new_wm->trans_wm.plane_res_l,

-:260: WARNING:LONG_LINE: line over 100 characters
#260: FILE: drivers/gpu/drm/i915/intel_pm.c:5776:
+				    enast(new_wm->sagv_wm0.ignore_lines), new_wm->sagv_wm0.plane_res_l);

total: 0 errors, 3 warnings, 0 checks, 253 lines checked
6cb704686cf3 drm/i915: Restrict qgv points which don't have enough bandwidth.
2d4913a8c452 drm/i915: Enable SAGV support for Gen12

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.BAT: success for SAGV support for Gen12+ (rev38)

[Patchwork]

== Series Details ==

Series: SAGV support for Gen12+ (rev38)
URL   : https://patchwork.freedesktop.org/series/75129/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_8483 -> Patchwork_17656
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/index.html

Known issues
------------

  Here are the changes found in Patchwork_17656 that come from known issues:

### IGT changes ###

#### Warnings ####

  * igt@i915_selftest@live@gt_pm:
    - fi-kbl-soraka:      [DMESG-FAIL][1] ([i915#1744]) -> [DMESG-FAIL][2] ([i915#1886])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/fi-kbl-soraka/igt@i915_selftest@live@gt_pm.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/fi-kbl-soraka/igt@i915_selftest@live@gt_pm.html

  
  [i915#1744]: https://gitlab.freedesktop.org/drm/intel/issues/1744
  [i915#1886]: https://gitlab.freedesktop.org/drm/intel/issues/1886


Participating hosts (50 -> 45)
------------------------------

  Additional (1): fi-skl-6600u 
  Missing    (6): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper 


Build changes
-------------

  * CI: CI-20190529 -> None
  * Linux: CI_DRM_8483 -> Patchwork_17656

  CI-20190529: 20190529
  CI_DRM_8483: eb8997678b25cb3ca507e02cb4e8bfd9c42b4268 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5654: 5637a466a0b09535517751608f5525a8b468a76b @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_17656: 2d4913a8c4527645b0cac448cc29c854f36c1019 @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

2d4913a8c452 drm/i915: Enable SAGV support for Gen12
6cb704686cf3 drm/i915: Restrict qgv points which don't have enough bandwidth.
4806d3748f45 drm/i915: Add TGL+ SAGV support

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/index.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.IGT: success for SAGV support for Gen12+ (rev38)

[Patchwork]

== Series Details ==

Series: SAGV support for Gen12+ (rev38)
URL   : https://patchwork.freedesktop.org/series/75129/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_8483_full -> Patchwork_17656_full
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  

Known issues
------------

  Here are the changes found in Patchwork_17656_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@i915_pm_dc@dc6-psr:
    - shard-iclb:         [PASS][1] -> [FAIL][2] ([i915#454])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-iclb8/igt@i915_pm_dc@dc6-psr.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-iclb6/igt@i915_pm_dc@dc6-psr.html

  * igt@i915_pm_rc6_residency@rc6-idle:
    - shard-hsw:          [PASS][3] -> [WARN][4] ([i915#1519])
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-hsw1/igt@i915_pm_rc6_residency@rc6-idle.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-hsw6/igt@i915_pm_rc6_residency@rc6-idle.html

  * igt@i915_pm_rpm@system-suspend:
    - shard-skl:          [PASS][5] -> [INCOMPLETE][6] ([i915#151] / [i915#69])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-skl10/igt@i915_pm_rpm@system-suspend.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-skl4/igt@i915_pm_rpm@system-suspend.html

  * igt@kms_big_fb@linear-32bpp-rotate-0:
    - shard-kbl:          [PASS][7] -> [FAIL][8] ([i915#1119] / [i915#93] / [i915#95])
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-kbl7/igt@kms_big_fb@linear-32bpp-rotate-0.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-kbl6/igt@kms_big_fb@linear-32bpp-rotate-0.html
    - shard-apl:          [PASS][9] -> [FAIL][10] ([i915#1119] / [i915#95])
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-apl2/igt@kms_big_fb@linear-32bpp-rotate-0.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-apl7/igt@kms_big_fb@linear-32bpp-rotate-0.html

  * igt@kms_cursor_legacy@cursora-vs-flipb-varying-size:
    - shard-hsw:          [PASS][11] -> [SKIP][12] ([fdo#109271])
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-hsw8/igt@kms_cursor_legacy@cursora-vs-flipb-varying-size.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-hsw2/igt@kms_cursor_legacy@cursora-vs-flipb-varying-size.html

  * igt@kms_cursor_legacy@pipe-c-torture-bo:
    - shard-skl:          [PASS][13] -> [DMESG-WARN][14] ([i915#128])
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-skl1/igt@kms_cursor_legacy@pipe-c-torture-bo.html
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-skl6/igt@kms_cursor_legacy@pipe-c-torture-bo.html

  * igt@kms_plane_alpha_blend@pipe-b-coverage-7efc:
    - shard-skl:          [PASS][15] -> [FAIL][16] ([fdo#108145] / [i915#265]) +1 similar issue
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-skl9/igt@kms_plane_alpha_blend@pipe-b-coverage-7efc.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-skl4/igt@kms_plane_alpha_blend@pipe-b-coverage-7efc.html

  * igt@kms_psr@psr2_primary_mmap_cpu:
    - shard-iclb:         [PASS][17] -> [SKIP][18] ([fdo#109441]) +1 similar issue
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-iclb2/igt@kms_psr@psr2_primary_mmap_cpu.html
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-iclb5/igt@kms_psr@psr2_primary_mmap_cpu.html

  * igt@kms_setmode@basic:
    - shard-kbl:          [PASS][19] -> [FAIL][20] ([i915#31])
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-kbl1/igt@kms_setmode@basic.html
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-kbl3/igt@kms_setmode@basic.html

  
#### Possible fixes ####

  * igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions:
    - shard-skl:          [FAIL][21] ([IGT#5]) -> [PASS][22]
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-skl1/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions.html
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-skl9/igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions.html

  * igt@kms_dp_dsc@basic-dsc-enable-edp:
    - shard-iclb:         [SKIP][23] ([fdo#109349]) -> [PASS][24]
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-iclb8/igt@kms_dp_dsc@basic-dsc-enable-edp.html
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-iclb2/igt@kms_dp_dsc@basic-dsc-enable-edp.html

  * {igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1}:
    - shard-skl:          [FAIL][25] ([i915#46]) -> [PASS][26]
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-skl6/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1.html
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-skl1/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1.html

  * {igt@kms_flip@flip-vs-suspend-interruptible@a-dp1}:
    - shard-kbl:          [DMESG-WARN][27] ([i915#180]) -> [PASS][28] +4 similar issues
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-kbl3/igt@kms_flip@flip-vs-suspend-interruptible@a-dp1.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-kbl4/igt@kms_flip@flip-vs-suspend-interruptible@a-dp1.html

  * {igt@kms_flip@flip-vs-suspend-interruptible@c-dp1}:
    - shard-apl:          [DMESG-WARN][29] ([i915#180]) -> [PASS][30] +6 similar issues
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-apl6/igt@kms_flip@flip-vs-suspend-interruptible@c-dp1.html
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-apl6/igt@kms_flip@flip-vs-suspend-interruptible@c-dp1.html

  * igt@kms_frontbuffer_tracking@fbcpsr-rgb565-draw-mmap-cpu:
    - shard-tglb:         [SKIP][31] ([i915#668]) -> [PASS][32] +5 similar issues
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-tglb6/igt@kms_frontbuffer_tracking@fbcpsr-rgb565-draw-mmap-cpu.html
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-tglb8/igt@kms_frontbuffer_tracking@fbcpsr-rgb565-draw-mmap-cpu.html

  * igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
    - shard-kbl:          [DMESG-WARN][33] ([i915#180] / [i915#93] / [i915#95]) -> [PASS][34]
   [33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-kbl1/igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c.html
   [34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-kbl3/igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c.html

  * igt@kms_plane_alpha_blend@pipe-c-coverage-7efc:
    - shard-skl:          [FAIL][35] ([fdo#108145] / [i915#265]) -> [PASS][36]
   [35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-skl8/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html
   [36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-skl1/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html

  * igt@kms_psr@no_drrs:
    - shard-iclb:         [FAIL][37] ([i915#173]) -> [PASS][38]
   [37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-iclb1/igt@kms_psr@no_drrs.html
   [38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-iclb3/igt@kms_psr@no_drrs.html

  * igt@kms_psr@psr2_suspend:
    - shard-iclb:         [SKIP][39] ([fdo#109441]) -> [PASS][40] +1 similar issue
   [39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-iclb3/igt@kms_psr@psr2_suspend.html
   [40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-iclb2/igt@kms_psr@psr2_suspend.html

  * igt@kms_setmode@basic:
    - shard-hsw:          [FAIL][41] ([i915#31]) -> [PASS][42]
   [41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-hsw4/igt@kms_setmode@basic.html
   [42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-hsw8/igt@kms_setmode@basic.html

  * {igt@perf@blocking-parameterized}:
    - shard-hsw:          [FAIL][43] ([i915#1542]) -> [PASS][44]
   [43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-hsw8/igt@perf@blocking-parameterized.html
   [44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-hsw2/igt@perf@blocking-parameterized.html

  * {igt@perf@polling-parameterized}:
    - shard-iclb:         [FAIL][45] ([i915#1542]) -> [PASS][46]
   [45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8483/shard-iclb8/igt@perf@polling-parameterized.html
   [46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/shard-iclb2/igt@perf@polling-parameterized.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [IGT#5]: https://gitlab.freedesktop.org/drm/igt-gpu-tools/issues/5
  [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#109349]: https://bugs.freedesktop.org/show_bug.cgi?id=109349
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [i915#1119]: https://gitlab.freedesktop.org/drm/intel/issues/1119
  [i915#128]: https://gitlab.freedesktop.org/drm/intel/issues/128
  [i915#151]: https://gitlab.freedesktop.org/drm/intel/issues/151
  [i915#1519]: https://gitlab.freedesktop.org/drm/intel/issues/1519
  [i915#1542]: https://gitlab.freedesktop.org/drm/intel/issues/1542
  [i915#173]: https://gitlab.freedesktop.org/drm/intel/issues/173
  [i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
  [i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
  [i915#31]: https://gitlab.freedesktop.org/drm/intel/issues/31
  [i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
  [i915#46]: https://gitlab.freedesktop.org/drm/intel/issues/46
  [i915#668]: https://gitlab.freedesktop.org/drm/intel/issues/668
  [i915#69]: https://gitlab.freedesktop.org/drm/intel/issues/69
  [i915#93]: https://gitlab.freedesktop.org/drm/intel/issues/93
  [i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95


Participating hosts (11 -> 11)
------------------------------

  No changes in participating hosts


Build changes
-------------

  * CI: CI-20190529 -> None
  * Linux: CI_DRM_8483 -> Patchwork_17656

  CI-20190529: 20190529
  CI_DRM_8483: eb8997678b25cb3ca507e02cb4e8bfd9c42b4268 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5654: 5637a466a0b09535517751608f5525a8b468a76b @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_17656: 2d4913a8c4527645b0cac448cc29c854f36c1019 @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17656/index.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v30 1/3] drm/i915: Add TGL+ SAGV support

[Ville Syrjälä]

On Thu, May 14, 2020 at 10:48:51AM +0300, Stanislav Lisovskiy wrote:
> Starting from TGL we need to have a separate wm0
> values for SAGV and non-SAGV which affects
> how calculations are done.
> 
> v2: Remove long lines
> v3: Removed COLOR_PLANE enum references
> v4, v5, v6: Fixed rebase conflict
> v7: - Removed skl_plane_wm_level accessor from skl_allocate_pipe_ddb(Ville)
>     - Removed sagv_uv_wm0(Ville)
>     - can_sagv->use_sagv_wm(Ville)
> 
> v8: - Moved tgl_crtc_can_enable_sagv function up(Ville)
>     - Changed comment regarding pipe_wm usage(Ville)
>     - Call intel_can_enable_sagv and tgl_compute_sagv_wm only
>       for Gen12(Ville)
>     - Some sagv debugs removed(Ville)
>     - skl_print_wm_changes improvements(Ville)
>     - Do assignment instead of memcpy in
>       skl_pipe_wm_get_hw_state(Ville)
> 
> v9: - Removed can_sagv variable(Ville)
>     - Removed spurious line(Ville)
>     - Changed u32 to unsigned int as agreed(Ville)
>     - Assign sagv only for gen12 in
>       skl_pipe_wm_get_hw_state(Ville)
> 
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c  |   8 +-
>  .../drm/i915/display/intel_display_types.h    |   2 +
>  drivers/gpu/drm/i915/intel_pm.c               | 110 +++++++++++++++---
>  3 files changed, 101 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 432b4eeaf9f6..b128fc859b20 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13961,7 +13961,9 @@ static void verify_wm_state(struct intel_crtc *crtc,
>  		/* Watermarks */
>  		for (level = 0; level <= max_level; level++) {
>  			if (skl_wm_level_equals(&hw_plane_wm->wm[level],
> -						&sw_plane_wm->wm[level]))
> +						&sw_plane_wm->wm[level]) ||
> +			    (level == 0 && skl_wm_level_equals(&hw_plane_wm->wm[level],
> +							       &sw_plane_wm->sagv_wm0)))
>  				continue;
>  
>  			drm_err(&dev_priv->drm,
> @@ -14016,7 +14018,9 @@ static void verify_wm_state(struct intel_crtc *crtc,
>  		/* Watermarks */
>  		for (level = 0; level <= max_level; level++) {
>  			if (skl_wm_level_equals(&hw_plane_wm->wm[level],
> -						&sw_plane_wm->wm[level]))
> +						&sw_plane_wm->wm[level]) ||
> +			    (level == 0 && skl_wm_level_equals(&hw_plane_wm->wm[level],
> +							       &sw_plane_wm->sagv_wm0)))
>  				continue;
>  
>  			drm_err(&dev_priv->drm,
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 87876fce91a5..2bf3d4cb4ea9 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -688,11 +688,13 @@ struct skl_plane_wm {
>  	struct skl_wm_level wm[8];
>  	struct skl_wm_level uv_wm[8];
>  	struct skl_wm_level trans_wm;
> +	struct skl_wm_level sagv_wm0;
>  	bool is_planar;
>  };
>  
>  struct skl_pipe_wm {
>  	struct skl_plane_wm planes[I915_MAX_PLANES];
> +	bool use_sagv_wm;
>  };
>  
>  enum vlv_wm_level {
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index f7bd1dbb625e..c52b941df5d6 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3853,9 +3853,38 @@ static bool skl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
>  	return true;
>  }
>  
> +static bool tgl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
> +{
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	enum plane_id plane_id;
> +
> +	if (!crtc_state->hw.active)
> +		return true;
> +
> +	for_each_plane_id_on_crtc(crtc, plane_id) {
> +		const struct skl_ddb_entry *plane_alloc =
> +			&crtc_state->wm.skl.plane_ddb_y[plane_id];
> +		const struct skl_plane_wm *wm =
> +			&crtc_state->wm.skl.optimal.planes[plane_id];
> +
> +		if (skl_ddb_entry_size(plane_alloc) < wm->sagv_wm0.min_ddb_alloc)
> +			return false;
> +	}
> +
> +	return true;
> +}
> +
>  static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
>  {
> -	return skl_crtc_can_enable_sagv(crtc_state);
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +
> +	if (INTEL_GEN(dev_priv) >= 12)
> +		return tgl_crtc_can_enable_sagv(crtc_state);
> +	else
> +		return skl_crtc_can_enable_sagv(crtc_state);
> +
> +	return false;

This one is obviously dead -> nuked while applying. Also
nuked the unused NUM_SAGV_POINTS and duplicate prototypes
for intel_sagv_{pre,post}_plane_update() from the second
patch.

In general I'd suggest you should try to read your own patches
a few more times as if you were reviewing them yourself to avoid
these sort of trivial things from coming up so often. Some of
that is probably down to fatigue with this particular series,
but I feel I've seen a hint of a pattern in other series as well.
I've found the practice of reviewing my own patches quite decent
at catching silly things at least, and sometimes it does reveal
more fundemental issues too.


Phew. All pushed to dinq now. Thanks for sticking with it. Took
us a "while" but I think we ended up with pretty decent code that
should be reasonaly easy to maintain from here on out.

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx