[Intel-wired-lan] [PATCH S46 1/9] ice: Reset VF for all port VLAN changes from host

[Intel-wired-lan] [PATCH S46 1/9] ice: Reset VF for all port VLAN changes from host

[Tony Nguyen]

From: Brett Creeley <brett.creeley@intel.com>

Currently the PF is modifying the VF's port VLAN on the fly when
configured via iproute. This is okay for most cases, but if the VF
already has guest VLANs configured the PF has to remove all of those
filters so only VLAN tagged traffic that matches the port VLAN will
pass. Instead of adding functionality to track which guest VLANs have
been added, just reset the VF each time port VLAN parameters are
modified.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
---
 .../net/ethernet/intel/ice/ice_virtchnl_pf.c  | 42 +++----------------
 1 file changed, 5 insertions(+), 37 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index abc4f2dba388..0ca614fa97bb 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -3269,7 +3269,6 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 		     __be16 vlan_proto)
 {
 	struct ice_pf *pf = ice_netdev_to_pf(netdev);
-	struct ice_vsi *vsi;
 	struct device *dev;
 	struct ice_vf *vf;
 	u16 vlanprio;
@@ -3291,8 +3290,6 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 	}
 
 	vf = &pf->vf[vf_id];
-	vsi = pf->vsi[vf->lan_vsi_idx];
-
 	ret = ice_check_vf_ready_for_cfg(vf);
 	if (ret)
 		return ret;
@@ -3305,44 +3302,15 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 		return 0;
 	}
 
-	if (vlan_id || qos) {
-		/* remove VLAN 0 filter set by default when transitioning from
-		 * no port VLAN to a port VLAN. No change to old port VLAN on
-		 * failure.
-		 */
-		ret = ice_vsi_kill_vlan(vsi, 0);
-		if (ret)
-			return ret;
-		ret = ice_vsi_manage_pvid(vsi, vlanprio, true);
-		if (ret)
-			return ret;
-	} else {
-		/* add VLAN 0 filter back when transitioning from port VLAN to
-		 * no port VLAN. No change to old port VLAN on failure.
-		 */
-		ret = ice_vsi_add_vlan(vsi, 0, ICE_FWD_TO_VSI);
-		if (ret)
-			return ret;
-		ret = ice_vsi_manage_pvid(vsi, 0, false);
-		if (ret)
-			return ret;
-	}
+	vf->port_vlan_info = vlanprio;
 
-	if (vlan_id) {
+	if (vf->port_vlan_info)
 		dev_info(dev, "Setting VLAN %d, QoS 0x%x on VF %d\n",
 			 vlan_id, qos, vf_id);
+	else
+		dev_info(dev, "Clearing port VLAN on VF %d\n", vf_id);
 
-		/* add VLAN filter for the port VLAN */
-		ret = ice_vsi_add_vlan(vsi, vlan_id, ICE_FWD_TO_VSI);
-		if (ret)
-			return ret;
-	}
-	/* remove old port VLAN filter with valid VLAN ID or QoS fields */
-	if (vf->port_vlan_info)
-		ice_vsi_kill_vlan(vsi, vf->port_vlan_info & VLAN_VID_MASK);
-
-	/* keep port VLAN information persistent on resets */
-	vf->port_vlan_info = le16_to_cpu(vsi->info.pvid);
+	ice_vc_reset_vf(vf);
 
 	return 0;
 }
-- 
2.20.1

[Intel-wired-lan] [PATCH S46 2/9] ice: Always clear QRXFLXP_CNTXT before writing new value

[Tony Nguyen]

From: Brett Creeley <brett.creeley@intel.com>

Always clear the previous value in QRXFLXP_CNTXT before writing a new
value. This will make it so re-used queues will not accidentally take the
previously configured settings.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_base.c | 33 ++++++++---------------
 drivers/net/ethernet/intel/ice/ice_lib.c  | 26 ++++++++++++++++++
 drivers/net/ethernet/intel/ice/ice_lib.h  |  3 +++
 3 files changed, 40 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c
index 798b173e81e0..04be6f2d1861 100644
--- a/drivers/net/ethernet/intel/ice/ice_base.c
+++ b/drivers/net/ethernet/intel/ice/ice_base.c
@@ -2,6 +2,7 @@
 /* Copyright (c) 2019, Intel Corporation. */
 
 #include "ice_base.h"
+#include "ice_lib.h"
 #include "ice_dcb_lib.h"
 
 /**
@@ -285,7 +286,6 @@ static int ice_setup_rx_ctx(struct ice_ring *ring)
 	u32 rxdid = ICE_RXDID_FLEX_NIC;
 	struct ice_rlan_ctx rlan_ctx;
 	struct ice_hw *hw;
-	u32 regval;
 	u16 pf_q;
 	int err;
 
@@ -346,27 +346,16 @@ static int ice_setup_rx_ctx(struct ice_ring *ring)
 	/* Rx queue threshold in units of 64 */
 	rlan_ctx.lrxqthresh = 1;
 
-	 /* Enable Flexible Descriptors in the queue context which
-	  * allows this driver to select a specific receive descriptor format
-	  */
-	regval = rd32(hw, QRXFLXP_CNTXT(pf_q));
-	if (vsi->type != ICE_VSI_VF) {
-		regval |= (rxdid << QRXFLXP_CNTXT_RXDID_IDX_S) &
-			QRXFLXP_CNTXT_RXDID_IDX_M;
-
-		/* increasing context priority to pick up profile ID;
-		 * default is 0x01; setting to 0x03 to ensure profile
-		 * is programming if prev context is of same priority
-		 */
-		regval |= (0x03 << QRXFLXP_CNTXT_RXDID_PRIO_S) &
-			QRXFLXP_CNTXT_RXDID_PRIO_M;
-
-	} else {
-		regval &= ~(QRXFLXP_CNTXT_RXDID_IDX_M |
-			    QRXFLXP_CNTXT_RXDID_PRIO_M |
-			    QRXFLXP_CNTXT_TS_M);
-	}
-	wr32(hw, QRXFLXP_CNTXT(pf_q), regval);
+	/* Enable Flexible Descriptors in the queue context which
+	 * allows this driver to select a specific receive descriptor format
+	 * increasing context priority to pick up profile ID; default is 0x01;
+	 * setting to 0x03 to ensure profile is programming if prev context is
+	 * of same priority
+	 */
+	if (vsi->type != ICE_VSI_VF)
+		ice_write_qrxflxp_cntxt(hw, pf_q, rxdid, 0x3);
+	else
+		ice_write_qrxflxp_cntxt(hw, pf_q, ICE_RXDID_LEGACY_1, 0x3);
 
 	/* Absolute queue number out of 2K needs to be passed */
 	err = ice_write_rxq_ctx(hw, &rlan_ctx, pf_q);
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 7ab7408b3a05..7cd4afcade13 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -1630,6 +1630,32 @@ void ice_vsi_cfg_frame_size(struct ice_vsi *vsi)
 	}
 }
 
+/**
+ * ice_write_qrxflxp_cntxt - write/configure QRXFLXP_CNTXT register
+ * @hw: HW pointer
+ * @pf_q: index of the Rx queue in the PF's queue space
+ * @rxdid: flexible descriptor RXDID
+ * @prio: priority for the RXDID for this queue
+ */
+void
+ice_write_qrxflxp_cntxt(struct ice_hw *hw, u16 pf_q, u32 rxdid, u32 prio)
+{
+	int regval = rd32(hw, QRXFLXP_CNTXT(pf_q));
+
+	/* clear any previous values */
+	regval &= ~(QRXFLXP_CNTXT_RXDID_IDX_M |
+		    QRXFLXP_CNTXT_RXDID_PRIO_M |
+		    QRXFLXP_CNTXT_TS_M);
+
+	regval |= (rxdid << QRXFLXP_CNTXT_RXDID_IDX_S) &
+		QRXFLXP_CNTXT_RXDID_IDX_M;
+
+	regval |= (prio << QRXFLXP_CNTXT_RXDID_PRIO_S) &
+		QRXFLXP_CNTXT_RXDID_PRIO_M;
+
+	wr32(hw, QRXFLXP_CNTXT(pf_q), regval);
+}
+
 /**
  * ice_vsi_cfg_rxqs - Configure the VSI for Rx
  * @vsi: the VSI being configured
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.h b/drivers/net/ethernet/intel/ice/ice_lib.h
index 0d11a3dbed78..9223d3e88869 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.h
+++ b/drivers/net/ethernet/intel/ice/ice_lib.h
@@ -76,6 +76,9 @@ int ice_vsi_rebuild(struct ice_vsi *vsi, bool init_vsi);
 
 bool ice_is_reset_in_progress(unsigned long *state);
 
+void
+ice_write_qrxflxp_cntxt(struct ice_hw *hw, u16 pf_q, u32 rxdid, u32 prio);
+
 void ice_vsi_put_qs(struct ice_vsi *vsi);
 
 void ice_vsi_dis_irq(struct ice_vsi *vsi);
-- 
2.20.1

[Intel-wired-lan] [PATCH S46 3/9] ice: Fix inability to set channels when down

[Tony Nguyen]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

Currently the driver prevents a user from doing
modprobe ice
ethtool -L eth0 combined 5
ip link set eth0 up

The ethtool command fails, because the driver is checking to see if the
interface is down before allowing the get_channels to proceed (even for
a set_channels).

Remove this check and allow the user to configure the interface
before bringing it up, which is a much better usability case.

Fixes: 87324e747fde ("ice: Implement ethtool ops for channels")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index fd1849155d85..68c38004a088 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -3189,10 +3189,6 @@ ice_get_channels(struct net_device *dev, struct ethtool_channels *ch)
 	struct ice_vsi *vsi = np->vsi;
 	struct ice_pf *pf = vsi->back;
 
-	/* check to see if VSI is active */
-	if (test_bit(__ICE_DOWN, vsi->state))
-		return;
-
 	/* report maximum channels */
 	ch->max_rx = ice_get_max_rxq(pf);
 	ch->max_tx = ice_get_max_txq(pf);
-- 
2.20.1

[Intel-wired-lan] [PATCH S46 4/9] ice: Allow VF to request reset as soon as it's initialized

[Tony Nguyen]

From: Brett Creeley <brett.creeley@intel.com>

A VF driver has the ability to request reset via VIRTCHNL_OP_RESET_VF.
This is a required step in VF driver load. Currently, the PF is only
allowing a VF to request reset using this method after the VF has
already communicated resources via VIRTCHNL_OP_GET_VF_RESOURCES.
However, this is incorrect because the VF can request reset before
requesting resources. Fix this by allowing the VF to request a reset
once it has been initialized.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 0ca614fa97bb..48ab7d89729e 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -1989,7 +1989,7 @@ static int ice_vc_get_vf_res_msg(struct ice_vf *vf, u8 *msg)
  */
 static void ice_vc_reset_vf_msg(struct ice_vf *vf)
 {
-	if (test_bit(ICE_VF_STATE_ACTIVE, vf->vf_states))
+	if (test_bit(ICE_VF_STATE_INIT, vf->vf_states))
 		ice_reset_vf(vf, false);
 }
 
-- 
2.20.1

[Intel-wired-lan] [PATCH S46 5/9] ice: fix function signature style format

[Tony Nguyen]

From: Bruce Allan <bruce.w.allan@intel.com>

Where possible, cuddle multiple lines of function signatures to be
consistent throughout the code.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_controlq.c |  3 +--
 drivers/net/ethernet/intel/ice/ice_sched.c    | 12 ++++--------
 drivers/net/ethernet/intel/ice/ice_switch.c   |  9 +++------
 3 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_controlq.c b/drivers/net/ethernet/intel/ice/ice_controlq.c
index 479a74efc536..1e18021aa073 100644
--- a/drivers/net/ethernet/intel/ice/ice_controlq.c
+++ b/drivers/net/ethernet/intel/ice/ice_controlq.c
@@ -769,8 +769,7 @@ enum ice_status ice_create_all_ctrlq(struct ice_hw *hw)
  *
  * Destroys the send and receive queue locks for a given control queue.
  */
-static void
-ice_destroy_ctrlq_locks(struct ice_ctl_q_info *cq)
+static void ice_destroy_ctrlq_locks(struct ice_ctl_q_info *cq)
 {
 	mutex_destroy(&cq->sq_lock);
 	mutex_destroy(&cq->rq_lock);
diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c
index e2bc7cfea254..5cfb3637dc3e 100644
--- a/drivers/net/ethernet/intel/ice/ice_sched.c
+++ b/drivers/net/ethernet/intel/ice/ice_sched.c
@@ -1771,8 +1771,7 @@ ice_sched_cfg_vsi(struct ice_port_info *pi, u16 vsi_handle, u8 tc, u16 maxqs,
  * This function removes single aggregator VSI info entry from
  * aggregator list.
  */
-static void
-ice_sched_rm_agg_vsi_info(struct ice_port_info *pi, u16 vsi_handle)
+static void ice_sched_rm_agg_vsi_info(struct ice_port_info *pi, u16 vsi_handle)
 {
 	struct ice_sched_agg_info *agg_info;
 	struct ice_sched_agg_info *atmp;
@@ -2006,8 +2005,7 @@ ice_sched_cfg_node_bw_alloc(struct ice_hw *hw, struct ice_sched_node *node,
  *
  * Save or clear CIR bandwidth (BW) in the passed param bw_t_info.
  */
-static void
-ice_set_clear_cir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
+static void ice_set_clear_cir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
 {
 	if (bw == ICE_SCHED_DFLT_BW) {
 		clear_bit(ICE_BW_TYPE_CIR, bw_t_info->bw_t_bitmap);
@@ -2026,8 +2024,7 @@ ice_set_clear_cir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
  *
  * Save or clear EIR bandwidth (BW) in the passed param bw_t_info.
  */
-static void
-ice_set_clear_eir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
+static void ice_set_clear_eir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
 {
 	if (bw == ICE_SCHED_DFLT_BW) {
 		clear_bit(ICE_BW_TYPE_EIR, bw_t_info->bw_t_bitmap);
@@ -2052,8 +2049,7 @@ ice_set_clear_eir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
  *
  * Save or clear shared bandwidth (BW) in the passed param bw_t_info.
  */
-static void
-ice_set_clear_shared_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
+static void ice_set_clear_shared_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
 {
 	if (bw == ICE_SCHED_DFLT_BW) {
 		clear_bit(ICE_BW_TYPE_SHARED, bw_t_info->bw_t_bitmap);
diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c
index 5760f2a3a8a4..9d5b527d5e38 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.c
+++ b/drivers/net/ethernet/intel/ice/ice_switch.c
@@ -1639,8 +1639,7 @@ ice_remove_rule_internal(struct ice_hw *hw, u8 recp_id,
  * check for duplicates in this case, removing duplicates from a given
  * list should be taken care of in the caller of this function.
  */
-enum ice_status
-ice_add_mac(struct ice_hw *hw, struct list_head *m_list)
+enum ice_status ice_add_mac(struct ice_hw *hw, struct list_head *m_list)
 {
 	struct ice_aqc_sw_rules_elem *s_rule, *r_iter;
 	struct ice_fltr_list_entry *m_list_itr;
@@ -1941,8 +1940,7 @@ ice_add_vlan_internal(struct ice_hw *hw, struct ice_fltr_list_entry *f_entry)
  * @hw: pointer to the hardware structure
  * @v_list: list of VLAN entries and forwarding information
  */
-enum ice_status
-ice_add_vlan(struct ice_hw *hw, struct list_head *v_list)
+enum ice_status ice_add_vlan(struct ice_hw *hw, struct list_head *v_list)
 {
 	struct ice_fltr_list_entry *v_list_itr;
 
@@ -2172,8 +2170,7 @@ ice_find_ucast_rule_entry(struct ice_hw *hw, u8 recp_id,
  * the entries passed into m_list were added previously. It will not attempt to
  * do a partial remove of entries that were found.
  */
-enum ice_status
-ice_remove_mac(struct ice_hw *hw, struct list_head *m_list)
+enum ice_status ice_remove_mac(struct ice_hw *hw, struct list_head *m_list)
 {
 	struct ice_fltr_list_entry *list_itr, *tmp;
 	struct mutex *rule_lock; /* Lock to protect filter rule list */
-- 
2.20.1

[Intel-wired-lan] [PATCH S46 6/9] ice: fix PCI device serial number to be lowercase values

[Tony Nguyen]

From: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>

Commit ceb2f00707f9 ("ice: Use pci_get_dsn()") changed the code to
use a new function to get the Device Serial Number. It also changed
the case of the filename for loading a package on a specific NIC
from lowercase to uppercase. Change the filename back to
lowercase since that is what we specified.

Fixes: ceb2f00707f9 ("ice: Use pci_get_dsn()")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 4107f6982543..7f444a24be07 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3273,7 +3273,7 @@ static char *ice_get_opt_fw_name(struct ice_pf *pf)
 	if (!opt_fw_filename)
 		return NULL;
 
-	snprintf(opt_fw_filename, NAME_MAX, "%sice-%016llX.pkg",
+	snprintf(opt_fw_filename, NAME_MAX, "%sice-%016llx.pkg",
 		 ICE_DDP_PKG_PATH, dsn);
 
 	return opt_fw_filename;
-- 
2.20.1

[Intel-wired-lan] [PATCH S46 7/9] ice: Use coalesce values from q_vector 0 when increasing q_vectors

[Tony Nguyen]

From: Brett Creeley <brett.creeley@intel.com>

Currently when a VSI is built (i.e. reset, set channels, etc.)
the coalesce settings will be preserved in most cases. However, when the
number of q_vectors are increased the settings for the new q_vectors
will be set to the driver defaults of AIM on, Rx/Tx ITR 50, and INTRL 0.
This is causing issues with how the ethtool layer gets the current
coalesce settings since it only uses q_vector 0. So, assume that the user
set the coalesce settings globally (i.e. ethtool -C eth0) and use q_vector
0's settings for all of the new q_vectors.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_lib.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 7cd4afcade13..392fb6e7de5d 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -2753,15 +2753,13 @@ ice_vsi_rebuild_set_coalesce(struct ice_vsi *vsi,
 		ice_vsi_rebuild_update_coalesce(vsi->q_vectors[i],
 						&coalesce[i]);
 
-	for (; i < vsi->num_q_vectors; i++) {
-		struct ice_coalesce_stored coalesce_dflt = {
-			.itr_tx = ICE_DFLT_TX_ITR,
-			.itr_rx = ICE_DFLT_RX_ITR,
-			.intrl = 0
-		};
+	/* number of q_vectors increased, so assume coalesce settings were
+	 * changed globally (i.e. ethtool -C eth0 instead of per-queue) and use
+	 * the previous settings from q_vector 0 for all of the new q_vectors
+	 */
+	for (; i < vsi->num_q_vectors; i++)
 		ice_vsi_rebuild_update_coalesce(vsi->q_vectors[i],
-						&coalesce_dflt);
-	}
+						&coalesce[0]);
 }
 
 /**
-- 
2.20.1

[Intel-wired-lan] [PATCH S46 8/9] ice: fix aRFS after flow director delete

[Tony Nguyen]

From: Henry Tieman <henry.w.tieman@intel.com>

The logic was missing for adding back perfect flows after flow director
filter delete. The code now adds perfect flows into the HW tables after
filter delete.

Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
---
 .../net/ethernet/intel/ice/ice_ethtool_fdir.c | 27 ++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c b/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
index 22cc4167b974..b92017b8ae4a 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
@@ -1363,6 +1363,31 @@ void ice_vsi_manage_fdir(struct ice_vsi *vsi, bool ena)
 	mutex_unlock(&hw->fdir_fltr_lock);
 }
 
+/**
+ * ice_fdir_do_rem_flow - delete flow and possibly add perfect flow
+ * @pf: PF structure
+ * @flow_type: FDir flow type to release
+ */
+static void
+ice_fdir_do_rem_flow(struct ice_pf *pf, enum ice_fltr_ptype flow_type)
+{
+	struct ice_hw *hw = &pf->hw;
+	bool need_perfect = false;
+
+	if (flow_type == ICE_FLTR_PTYPE_NONF_IPV4_TCP ||
+	    flow_type == ICE_FLTR_PTYPE_NONF_IPV4_UDP ||
+	    flow_type == ICE_FLTR_PTYPE_NONF_IPV6_TCP ||
+	    flow_type == ICE_FLTR_PTYPE_NONF_IPV6_UDP)
+		need_perfect = true;
+
+	if (need_perfect && test_bit(flow_type, hw->fdir_perfect_fltr))
+		return;
+
+	ice_fdir_rem_flow(hw, ICE_BLK_FD, flow_type);
+	if (need_perfect)
+		ice_create_init_fdir_rule(pf, flow_type);
+}
+
 /**
  * ice_fdir_update_list_entry - add or delete a filter from the filter list
  * @pf: PF structure
@@ -1393,7 +1418,7 @@ ice_fdir_update_list_entry(struct ice_pf *pf, struct ice_fdir_fltr *input,
 			/* we just deleted the last filter of flow_type so we
 			 * should also delete the HW filter info.
 			 */
-			ice_fdir_rem_flow(hw, ICE_BLK_FD, old_fltr->flow_type);
+			ice_fdir_do_rem_flow(pf, old_fltr->flow_type);
 		list_del(&old_fltr->fltr_node);
 		devm_kfree(ice_hw_to_dev(hw), old_fltr);
 	}
-- 
2.20.1

[Intel-wired-lan] [PATCH S46 9/9] ice: Ignore EMODE when setting PHY config

[Tony Nguyen]

From: Chinh T Cao <chinh.t.cao@intel.com>

When setting the PHY cfg (CQ cmd 0x0601), if the firmware responds
with an EMODE error, software will ignore the error as it simply
means that manageability (ex: BMC) is in control of the link and that
the new setting may not be applied.

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_adminq_cmd.h | 1 +
 drivers/net/ethernet/intel/ice/ice_common.c     | 7 ++++++-
 drivers/net/ethernet/intel/ice/ice_main.c       | 2 ++
 3 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index bba47f11e546..3c28379dfb3e 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -1858,6 +1858,7 @@ enum ice_aq_err {
 	ICE_AQ_RC_EINVAL	= 14, /* Invalid argument */
 	ICE_AQ_RC_ENOSPC	= 16, /* No space left or allocation failure */
 	ICE_AQ_RC_ENOSYS	= 17, /* Function not implemented */
+	ICE_AQ_RC_EMODE		= 21, /* Op not allowed in current dev mode */
 	ICE_AQ_RC_ENOSEC	= 24, /* Missing security manifest */
 	ICE_AQ_RC_EBADSIG	= 25, /* Bad RSA signature */
 	ICE_AQ_RC_ESVN		= 26, /* SVN number prohibits this package */
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index ce578fe4ab3e..da724b0e524d 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -2248,6 +2248,7 @@ ice_aq_set_phy_cfg(struct ice_hw *hw, u8 lport,
 		   struct ice_aqc_set_phy_cfg_data *cfg, struct ice_sq_cd *cd)
 {
 	struct ice_aq_desc desc;
+	enum ice_status status;
 
 	if (!cfg)
 		return ICE_ERR_PARAM;
@@ -2276,7 +2277,11 @@ ice_aq_set_phy_cfg(struct ice_hw *hw, u8 lport,
 	ice_debug(hw, ICE_DBG_LINK, "eeer_value = 0x%x\n", cfg->eeer_value);
 	ice_debug(hw, ICE_DBG_LINK, "link_fec_opt = 0x%x\n", cfg->link_fec_opt);
 
-	return ice_aq_send_cmd(hw, &desc, cfg, sizeof(*cfg), cd);
+	status = ice_aq_send_cmd(hw, &desc, cfg, sizeof(*cfg), cd);
+	if (hw->adminq.sq_last_status == ICE_AQ_RC_EMODE)
+		status = 0;
+
+	return status;
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 7f444a24be07..a2d3cba19565 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -5245,6 +5245,8 @@ const char *ice_aq_str(enum ice_aq_err aq_err)
 		return "ICE_AQ_RC_ENOSPC";
 	case ICE_AQ_RC_ENOSYS:
 		return "ICE_AQ_RC_ENOSYS";
+	case ICE_AQ_RC_EMODE:
+		return "ICE_AQ_RC_EMODE";
 	case ICE_AQ_RC_ENOSEC:
 		return "ICE_AQ_RC_ENOSEC";
 	case ICE_AQ_RC_EBADSIG:
-- 
2.20.1

[Intel-wired-lan] [PATCH S46 1/9] ice: Reset VF for all port VLAN changes from host

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of
> Tony Nguyen
> Sent: Friday, May 15, 2020 5:55 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S46 1/9] ice: Reset VF for all port VLAN
> changes from host
> 
> From: Brett Creeley <brett.creeley@intel.com>
> 
> Currently the PF is modifying the VF's port VLAN on the fly when configured
> via iproute. This is okay for most cases, but if the VF already has guest VLANs
> configured the PF has to remove all of those filters so only VLAN tagged
> traffic that matches the port VLAN will pass. Instead of adding functionality to
> track which guest VLANs have been added, just reset the VF each time port
> VLAN parameters are modified.
> 
> Signed-off-by: Brett Creeley <brett.creeley@intel.com>
> ---
>  .../net/ethernet/intel/ice/ice_virtchnl_pf.c  | 42 +++----------------
>  1 file changed, 5 insertions(+), 37 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [PATCH S46 2/9] ice: Always clear QRXFLXP_CNTXT before writing new value

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of
> Tony Nguyen
> Sent: Friday, May 15, 2020 5:55 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S46 2/9] ice: Always clear QRXFLXP_CNTXT
> before writing new value
> 
> From: Brett Creeley <brett.creeley@intel.com>
> 
> Always clear the previous value in QRXFLXP_CNTXT before writing a new
> value. This will make it so re-used queues will not accidentally take the
> previously configured settings.
> 
> Signed-off-by: Brett Creeley <brett.creeley@intel.com>
> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_base.c | 33 ++++++++---------------
> drivers/net/ethernet/intel/ice/ice_lib.c  | 26 ++++++++++++++++++
> drivers/net/ethernet/intel/ice/ice_lib.h  |  3 +++
>  3 files changed, 40 insertions(+), 22 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [PATCH S46 3/9] ice: Fix inability to set channels when down

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of
> Tony Nguyen
> Sent: Friday, May 15, 2020 5:55 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S46 3/9] ice: Fix inability to set channels
> when down
> 
> From: Jesse Brandeburg <jesse.brandeburg@intel.com>
> 
> Currently the driver prevents a user from doing modprobe ice ethtool -L eth0
> combined 5 ip link set eth0 up
> 
> The ethtool command fails, because the driver is checking to see if the
> interface is down before allowing the get_channels to proceed (even for a
> set_channels).
> 
> Remove this check and allow the user to configure the interface before
> bringing it up, which is a much better usability case.
> 
> Fixes: 87324e747fde ("ice: Implement ethtool ops for channels")
> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_ethtool.c | 4 ----
>  1 file changed, 4 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [PATCH S46 4/9] ice: Allow VF to request reset as soon as it's initialized

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of
> Tony Nguyen
> Sent: Friday, May 15, 2020 5:55 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S46 4/9] ice: Allow VF to request reset as
> soon as it's initialized
> 
> From: Brett Creeley <brett.creeley@intel.com>
> 
> A VF driver has the ability to request reset via VIRTCHNL_OP_RESET_VF.
> This is a required step in VF driver load. Currently, the PF is only allowing a VF
> to request reset using this method after the VF has already communicated
> resources via VIRTCHNL_OP_GET_VF_RESOURCES.
> However, this is incorrect because the VF can request reset before
> requesting resources. Fix this by allowing the VF to request a reset once it
> has been initialized.
> 
> Signed-off-by: Brett Creeley <brett.creeley@intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [PATCH S46 5/9] ice: fix function signature style format

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of
> Tony Nguyen
> Sent: Friday, May 15, 2020 5:55 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S46 5/9] ice: fix function signature style
> format
> 
> From: Bruce Allan <bruce.w.allan@intel.com>
> 
> Where possible, cuddle multiple lines of function signatures to be consistent
> throughout the code.
> 
> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_controlq.c |  3 +--
>  drivers/net/ethernet/intel/ice/ice_sched.c    | 12 ++++--------
>  drivers/net/ethernet/intel/ice/ice_switch.c   |  9 +++------
>  3 files changed, 8 insertions(+), 16 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [PATCH S46 6/9] ice: fix PCI device serial number to be lowercase values

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of
> Tony Nguyen
> Sent: Friday, May 15, 2020 5:55 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S46 6/9] ice: fix PCI device serial number to
> be lowercase values
> 
> From: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
> 
> Commit ceb2f00707f9 ("ice: Use pci_get_dsn()") changed the code to use a
> new function to get the Device Serial Number. It also changed the case of the
> filename for loading a package on a specific NIC from lowercase to
> uppercase. Change the filename back to lowercase since that is what we
> specified.
> 
> Fixes: ceb2f00707f9 ("ice: Use pci_get_dsn()")
> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_main.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [PATCH S46 7/9] ice: Use coalesce values from q_vector 0 when increasing q_vectors

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of
> Tony Nguyen
> Sent: Friday, May 15, 2020 5:55 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S46 7/9] ice: Use coalesce values from
> q_vector 0 when increasing q_vectors
> 
> From: Brett Creeley <brett.creeley@intel.com>
> 
> Currently when a VSI is built (i.e. reset, set channels, etc.) the coalesce
> settings will be preserved in most cases. However, when the number of
> q_vectors are increased the settings for the new q_vectors will be set to the
> driver defaults of AIM on, Rx/Tx ITR 50, and INTRL 0.
> This is causing issues with how the ethtool layer gets the current coalesce
> settings since it only uses q_vector 0. So, assume that the user set the
> coalesce settings globally (i.e. ethtool -C eth0) and use q_vector 0's settings
> for all of the new q_vectors.
> 
> Signed-off-by: Brett Creeley <brett.creeley@intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_lib.c | 14 ++++++--------
>  1 file changed, 6 insertions(+), 8 deletions(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [PATCH S46 8/9] ice: fix aRFS after flow director delete

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of
> Tony Nguyen
> Sent: Friday, May 15, 2020 5:55 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S46 8/9] ice: fix aRFS after flow director
> delete
> 
> From: Henry Tieman <henry.w.tieman@intel.com>
> 
> The logic was missing for adding back perfect flows after flow director filter
> delete. The code now adds perfect flows into the HW tables after filter
> delete.
> 
> Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
> ---
>  .../net/ethernet/intel/ice/ice_ethtool_fdir.c | 27 ++++++++++++++++++-
>  1 file changed, 26 insertions(+), 1 deletion(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>

[Intel-wired-lan] [PATCH S46 9/9] ice: Ignore EMODE when setting PHY config

[Bowers, AndrewX]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of
> Tony Nguyen
> Sent: Friday, May 15, 2020 5:55 PM
> To: intel-wired-lan at lists.osuosl.org
> Subject: [Intel-wired-lan] [PATCH S46 9/9] ice: Ignore EMODE when setting
> PHY config
> 
> From: Chinh T Cao <chinh.t.cao@intel.com>
> 
> When setting the PHY cfg (CQ cmd 0x0601), if the firmware responds with an
> EMODE error, software will ignore the error as it simply means that
> manageability (ex: BMC) is in control of the link and that the new setting may
> not be applied.
> 
> Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_adminq_cmd.h | 1 +
>  drivers/net/ethernet/intel/ice/ice_common.c     | 7 ++++++-
>  drivers/net/ethernet/intel/ice/ice_main.c       | 2 ++
>  3 files changed, 9 insertions(+), 1 deletion(-)

Tested-by: Andrew Bowers <andrewx.bowers@intel.com>