From mboxrd@z Thu Jan  1 00:00:00 1970
From: Pragnesh Patel <pragnesh.patel@sifive.com>
Date: Tue, 19 May 2020 12:33:43 +0530
Subject: [PATCH v11 18/18] doc: sifive: fu540: Add description for OpenSBI
 generic platform
In-Reply-To: <20200519070346.24479-1-pragnesh.patel@sifive.com>
References: <20200519070346.24479-1-pragnesh.patel@sifive.com>
Message-ID: <20200519070346.24479-19-pragnesh.patel@sifive.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

OpenSBI generic platform support provides platform specific
functionality based on the FDT passed by previous booting stage.

Depends on OpenSBI commit:
platform: Add generic FDT based platform support
(sha1: f1aa9e54e00006ae70aeac638d5b75093520f65d)

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
 doc/board/sifive/fu540.rst | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst
index 766629ebae..9e9ae98b64 100644
--- a/doc/board/sifive/fu540.rst
+++ b/doc/board/sifive/fu540.rst
@@ -20,17 +20,6 @@ The support for following drivers are already enabled:
 4. SiFive SPI Driver.
 5. MMC SPI Driver for MMC/SD support.
 
-TODO:
-
-1. U-Boot expects the serial console device entry to be present under /chosen
-   DT node. Without a serial console U-Boot will panic. Example:
-
-.. code-block:: none
-
-   chosen {
-        stdout-path = "/soc/serial at 10010000:115200";
-   };
-
 Booting from MMC using FSBL
 ---------------------------
 
@@ -61,7 +50,7 @@ firmware. We need to compile OpenSBI with below command:
 
 .. code-block:: none
 
-make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<path to u-boot-dtb.bin>
+	make PLATFORM=generic FW_PAYLOAD_PATH=<path to u-boot-dtb.bin>
 
 More detailed description of steps required to build FW_PAYLOAD firmware
 is beyond the scope of this document. Please refer OpenSBI documenation.
-- 
2.17.1