On Tue, May 19, 2020 at 03:26:30PM +0200, Andrew Lunn wrote:
> On Tue, May 19, 2020 at 09:51:59AM +0200, Oleksij Rempel wrote:
> > Signal Quality Index is a mandatory value required by "OPEN Alliance
> > SIG" for the 100Base-T1 PHYs [1]. This indicator can be used for cable
> > integrity diagnostic and investigating other noise sources and
> > implement by at least two vendors: NXP[2] and TI[3].
> 
> Hi Oleksij
> 
> With a multi part patch set, please always include a cover note,
> describing what the patchset as a whole does.

ok

> > +int __ethtool_get_sqi(struct net_device *dev)
> > +{
> > +	struct phy_device *phydev = dev->phydev;
> > +
> > +	if (!phydev->drv->get_sqi)
> > +		return -EOPNOTSUPP;
> > +
> > +	return phydev->drv->get_sqi(phydev);
> > +}
> 
> You are not doing any locking here, which you should. Due to modules
> vs built in, it can be a bit tricky getting this right. Take a look at
> how ethtool ioctl.c uses phy_ethtool_get_stats() and that inline
> function itself.

ok.

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |